Check and skip VPP_EXCLUDED_PLUGINS tests for most of plugins.
Type: improvement
Signed-off-by: Dmitry Valter <d-valter@yandex-team.com>
Change-Id: I23fd3666729251c639aa8da72a676058e3f5bb4e
When the NIC does not support mac filter, we rely on ethernet-input
node to do the destination mac check, ie, when the interface is in L3,
the mac address for the packet must be the mac address of the
interface where the packet arrives. This works fine in ethernet-input
node when all packets in the frame might have different interfaces, ie,
ETH_INPUT_FRAME_F_SINGLE_SW_IF_ID is not set in the frame. However,
when all packets are having the same interface,
ETH_INPUT_FRAME_F_SINGLE_SW_IF_ID is set, ethernet-input node goes
through the optimized routine eth_input_single_int -> eth_input_process_frame.
That is where dmac check has a bug when all packets in the frame are
either, ip4, ip6, or mpls without vlan tags. Because without vlan tags,
the code handles all packets in fast path and ignores dmac check.
With vlan tags, the code goes to slow path where dmac check is handled
properly.
The fix is to check if we have a bad dmac in the fast path and force the
code to go to slow path which will handle dmac check properly.
Also do a wholesale correction on all the testcases which do not use
the proper dmac when sending L3 packets.
Type: fix
Change-Id: I73153a805cecdc24c4eefcc781676de04737ae2c
Signed-off-by: Steven Luong <sluong@cisco.com>
- Make framework.py classes a subset of asfframework.py classes
- Remove all packet related code from asfframework.py
- Add test class and test case set up debug output to log
- Repatriate packet tests from asf to test directory
- Remove non-packet related code from framework.py and
inherit them from asfframework.py classes
- Clean up unused import variables
- Re-enable BFD tests on Ubuntu 22.04 and fix
intermittent test failures in echo_looped_back
testcases (where # control packets verified but
not guaranteed to be received during test)
- Re-enable Wireguard tests on Ubuntu 22.04 and fix
intermittent test failures in handshake ratelimiting
testcases and event testcase
- Run Wiregard testcase suites solo
- Improve debug output in log.txt
- Increase VCL/LDP post sleep timeout to allow iperf server
to finish cleanly.
- Fix pcap history files to be sorted by suite and testcase
and ensure order/timestamp is correct based on creation
in the testcase.
- Decode pcap files for each suite and testcase for all
errors or if configured via comandline option / env var
- Improve vpp corefile detection to allow complete corefile
generation
- Disable vm vpp interfaces testcases on debian11
- Clean up failed unittest dir when retrying failed testcases
and unify testname directory and failed linknames into
framwork functions
Type: test
Change-Id: I0764f79ea5bb639d278bf635ed2408d4d5220e1e
Signed-off-by: Dave Wallace <dwallacelf@gmail.com>
Upon test teardown, MAP features were not disabled, potentially
leading packets to be treated by the wrong node.
Type: test
Change-Id: I0c1c614318d1308f825c5cc0bf95688e92f6d00a
Signed-off-by: Maxime Peim <mpeim@cisco.com>
Drop pycodestyle for code style checking in favor of black. Black is
much faster, stable PEP8 compliant code style checker offering also
automatic formatting. It aims to be very stable and produce smallest
diffs. It's used by many small and big projects.
Running checkstyle with black takes a few seconds with a terse output.
Thus, test-checkstyle-diff is no longer necessary.
Expand scope of checkstyle to all python files in the repo, replacing
test-checkstyle with checkstyle-python.
Also, fixstyle-python is now available for automatic style formatting.
Note: python virtualenv has been consolidated in test/Makefile,
test/requirements*.txt which will eventually be moved to a central
location. This is required to simply the automated generation of
docker executor images in the CI.
Type: improvement
Change-Id: I022a326603485f58585e879ac0f697fceefbc9c8
Signed-off-by: Klement Sekera <klement.sekera@gmail.com>
Signed-off-by: Dave Wallace <dwallacelf@gmail.com>
Type: fix
The l2unfragmentable size is not included in the calculation of 'max', the maximum amount of data that can be added to a fragment, therefore the fragments created are too big.
Signed-off-by: Neale Ranns <neale@graphiant.com>
Change-Id: Id1e949ad98203b6f8ea2f55322ef6fa3d507e2a6
- Generate copyright year and version
instead of using hard-coded data
Type: refactor
Signed-off-by: Dave Wallace <dwallacelf@gmail.com>
Change-Id: I6058f5025323b3aa483f5df4a2c4371e27b5914e
- Relocate plugin tests for 'make test' into
src/plugins/*/test so that plugin test cases
are co-located with the plugin source code.
Type: refactor
Signed-off-by: Dave Wallace <dwallacelf@gmail.com>
Change-Id: I503e6a43528e14981799b735fa65674155713f67
Signed-off-by: Dave Wallace <dwallacelf@gmail.com>
Enhance the route add/del APIs to take a set of paths rather than just one.
Most unicast routing protocols calcualte all the available paths in one
run of the algorithm so updating all the paths at once is beneficial for the client.
two knobs control the behaviour:
is_multipath - if set the the set of paths passed will be added to those
that already exist, otherwise the set will replace them.
is_add - add or remove the set
is_add=0, is_multipath=1 and an empty set, results in deleting the route.
It is also considerably faster to add multiple paths at once, than one at a time:
vat# ip_add_del_route 1.1.1.1/32 count 100000 multipath via 10.10.10.11
100000 routes in .572240 secs, 174751.80 routes/sec
vat# ip_add_del_route 1.1.1.1/32 count 100000 multipath via 10.10.10.12
100000 routes in .528383 secs, 189256.54 routes/sec
vat# ip_add_del_route 1.1.1.1/32 count 100000 multipath via 10.10.10.13
100000 routes in .757131 secs, 132077.52 routes/sec
vat# ip_add_del_route 1.1.1.1/32 count 100000 multipath via 10.10.10.14
100000 routes in .878317 secs, 113854.12 routes/sec
vat# ip_route_add_del 1.1.1.1/32 count 100000 multipath via 10.10.10.11 via 10.10.10.12 via 10.10.10.13 via 10.10.10.14
100000 routes in .900212 secs, 111084.93 routes/sec
Change-Id: I416b93f7684745099c1adb0b33edac58c9339c1a
Signed-off-by: Neale Ranns <neale.ranns@cisco.com>
Signed-off-by: Ole Troan <ot@cisco.com>
Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
* Add optional tag to api call in tests
* Add test for map_domain_dump() for api code coverage.
Type: fix
Change-Id: I2f7784aecdca4bf9e94de3319f959786e3d2c607
Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
Continuation/Part 2 of https://gerrit.fd.io/r/#/c/17092/
Change-Id: Id0122d84eaf2c05d29e5be63a594d5e528ee7c9a
Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
This is the first step to be able to remove all the API message
wrappers in vpp_papi_provider.py. This allows to remove all
functions that do not override parameters (different from zero),
and a separate dictionary for messages requiring different defaults.
The general requirement is that all new tests should use named
arguments directly. Not positional arguments through the wrapper.
Note when removing functions, the calls in vpp_papi_provider
wrappers do not necessarily follow message order.
Change-Id: If64916c07f8622c138db3a9d7c4a98b93a058e68
Signed-off-by: Ole Troan <ot@cisco.com>
They mask dependencies and confuse third party tools.
Change-Id: I24ee16bfa0d746a8e8cb99891ba8b20523048b69
Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
The API calls that use any of vl_api_address_t, vl_api_ip4_address,
vl_api_ip6_address_t, vl_api_prefix_t, vl_api_ip4_prefix_t,
vl_api_ip6_prefix_t now accepts either the old style dictionary,
a text string (2001:db8::/32) or an ipaddress ojbect.
Unless it is called with '_no_type_conversion':True, it will
also return an appropriate ipaddress object.
Change-Id: I84e4a1577bd57f6b5ae725f316a523988b6a955b
Signed-off-by: Ole Troan <ot@cisco.com>
- common types on the API
- endpoints keyed in various ways for DP lookup
- conparison functions for VPP IP address types
Change-Id: If7ec0bbc5cea71fd0983fe78987d147ec1bd7ec8
Signed-off-by: Neale Ranns <neale.ranns@cisco.com>
[support for VPWS/VPLS]
- switch to using dpo_proto_t rather than fib_protocol_t in fib_paths so that we can describe L2 paths
- VLIB nodes to handle pop/push of MPLS labels to L2
Change-Id: Id050d06a11fd2c9c1c81ce5a0654e6c5ae6afa6e
Signed-off-by: Neale Ranns <nranns@cisco.com>
