Type: feature
Adding a prefix to an interface was not permitted if it overlapped
with another prefix on an interface which used the same FIB.
Loosen the restriction. Allow 2 or more addresses from the same
prefix on a single interface. Reference count the prefix to figure
out when a glean/connected route for the prefix needs to be added
or removed.
Added unit tests to check that the route is only removed when all
addresses in the prefix are removed from the interface.
Change-Id: I1a962ecb5e1ee65fc6d41f98a4cc097a51a55321
Signed-off-by: Matthew Smith <mgsmith@netgate.com>
(cherry picked from commit 6c92f5babd)
Type: feature
When admin status is changed on an interface, add or delete the
routes for the IPv4 addresses configured on that interface.
This is already being done for IPv6 interface addresses.
Change-Id: Ib1e7dc49c499921dd287e075640243520ffa5589
Signed-off-by: Matthew Smith <mgsmith@netgate.com>
Enhance the route add/del APIs to take a set of paths rather than just one.
Most unicast routing protocols calcualte all the available paths in one
run of the algorithm so updating all the paths at once is beneficial for the client.
two knobs control the behaviour:
is_multipath - if set the the set of paths passed will be added to those
that already exist, otherwise the set will replace them.
is_add - add or remove the set
is_add=0, is_multipath=1 and an empty set, results in deleting the route.
It is also considerably faster to add multiple paths at once, than one at a time:
vat# ip_add_del_route 1.1.1.1/32 count 100000 multipath via 10.10.10.11
100000 routes in .572240 secs, 174751.80 routes/sec
vat# ip_add_del_route 1.1.1.1/32 count 100000 multipath via 10.10.10.12
100000 routes in .528383 secs, 189256.54 routes/sec
vat# ip_add_del_route 1.1.1.1/32 count 100000 multipath via 10.10.10.13
100000 routes in .757131 secs, 132077.52 routes/sec
vat# ip_add_del_route 1.1.1.1/32 count 100000 multipath via 10.10.10.14
100000 routes in .878317 secs, 113854.12 routes/sec
vat# ip_route_add_del 1.1.1.1/32 count 100000 multipath via 10.10.10.11 via 10.10.10.12 via 10.10.10.13 via 10.10.10.14
100000 routes in .900212 secs, 111084.93 routes/sec
Change-Id: I416b93f7684745099c1adb0b33edac58c9339c1a
Signed-off-by: Neale Ranns <neale.ranns@cisco.com>
Signed-off-by: Ole Troan <ot@cisco.com>
Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
* change literal packet count vlaues from 65 to a named constant of 67.
(This value was recommended to exercise single, dual, and quad loops)
Change-Id: Ieb1738dddacb8b6ea7fa25883032ac01a98399e1
Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
This change adds a consistent interface for adding test-specific show commands to
log.txt.
It also adds log markers for the execution of setUp[Class], tearDown[Class]
in the logs.
Change-Id: I7d42e396e594a59e866a7d55dac0af25548e657a
Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
Split this work up into pieces.
Please don't add new wrappers to vpp_papi_provider.py.
Change-Id: I0f8f2afc4cd2bba07ea70ddecea2d7319f7b2e10
Signed-off-by: Ole Troan <ot@cisco.com>
All callers of payload_to_info were required to wrap payload with str().
Refactor to call scapy's payload.load for raw payloads or specify the
specific fieldname.
Change-Id: I1c80599d4df8dc129dbb8274733afaad406d5bcf
Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
.format() doesn't understand what to do with binary values by default.
Specify that we expect coersion to string.
Change-Id: Ic4b697f70852124dc85ab231f76b7934d0d71f4d
Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
Part of further cleanups of this file.
Removed most wrappers that don't have conflicting signature with
message API.
Change-Id: I6acd93d20291feb7731eb35ab2eb8c9f22f4632c
Signed-off-by: Ole Troan <ot@cisco.com>
The tests fail if run independently or out of order.
This change breaks the dependency between the tests.
ERROR: Add 1k routes
------------------------------------------------------------------------------
Traceback (most recent call last):
File "/vpp/test/test_ip4.py", line 514, in test_3_add_new_routes
self.deleted_routes.remove(x)
ValueError: list.remove(x): x not in list
Change-Id: I344ceba6bd8b86556f92e50080be6c43092b9faf
Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
The API calls that use any of vl_api_address_t, vl_api_ip4_address,
vl_api_ip6_address_t, vl_api_prefix_t, vl_api_ip4_prefix_t,
vl_api_ip6_prefix_t now accepts either the old style dictionary,
a text string (2001:db8::/32) or an ipaddress ojbect.
Unless it is called with '_no_type_conversion':True, it will
also return an appropriate ipaddress object.
Change-Id: I84e4a1577bd57f6b5ae725f316a523988b6a955b
Signed-off-by: Ole Troan <ot@cisco.com>
Change to binascii.hexlify() for consistent bahavior.
Change-Id: Ie430cdd1ffeb6510db4aa037546e42d85992093b
Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
Use assert(Not)Equal()
Use assert{Greater,Less}[Equal]
Change-Id: I7c14570b8dce463ee13a67e9c1f10beb1a0308a8
Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
with ip direct broadcast enable a packet to the interface's
subnet broadcast address with be sent L2 broadcast on the
interface. dissabled, it will be dropped. it is disabled by
default, which preserves current behaviour
Change-Id: If154cb92e64834e97a541b32624354348a0eafb3
Signed-off-by: Neale Ranns <nranns@cisco.com>
This patch separates setting of hardware interfaec and software
interface MTU. Software MTU is L2 payload MTU (i.e. not including L2
header). Per-protocol MTU for IPv4, IPv6 and MPLS can also be set.
Currently only IP4, IP6 are enabled in adjacency / rewrite code.
Documentation in src/vnet/MTU.md
Change-Id: Iee2fd6f0bbc8210748dd8e073ab9fab87d323690
Signed-off-by: Ole Troan <ot@cisco.com>
This reverts commit 70083ee74c.
Reverting as this patch is causing following crash:
0: /home/damarion/cisco/vpp3/build-data/../src/vnet/devices/devices.h:131 (vnet_get_device_input_thread_index) assertion `queue_id < vec_len (hw->input_node_thread_index_by_queue)' fails
Aborted
Change-Id: Ie2a365032110b1f67be7a9d832885b9899813d39
Signed-off-by: Damjan Marion <damarion@cisco.com>
- setting MTU on an interface updates the L3 max bytes too
- value cached in the adjacency is also updated
- MTU exceeded generates ICMP to sender
Change-Id: I343ec71d8e903b529594c4bd0543f04bc7f370b3
Signed-off-by: Neale Ranns <neale.ranns@cisco.com>
- new IPv4 and IPv6 feature arcs on the punt and drop nodes
- new features:
- redirect punted traffic to an interface and nexthop
- police punted traffic.
Change-Id: I53be8bf4e06545add8a3619e462de5ffedd0a95c
Signed-off-by: Neale Ranns <nranns@cisco.com>
part 2;
- this adds the code to create an IP and MPLS table via the API.
- but the enforcement that the table must be created before it is used is still missing, this is so that CSIT can pass.
Change-Id: Id124d884ade6cb7da947225200e3bb193454c555
Signed-off-by: Neale Ranns <nranns@cisco.com>
- the flow hash config is (and was) cached on the load-balance object so the fib_table_t struct is not used a switch time. Therefore changes to the table's flow hash config need to be propagated to all load-balances and hance all FIB entries in the table.
- enable API for setting the IPv6 table flow hash config
- use only the hash config in the fib_table_t object and not on the ipX_fib_t
- add tests.
Change-Id: Ib804c11162c6d4972c764957562c372f663e05d4
Signed-off-by: Neale Ranns <nranns@cisco.com>
Drop comes before lookup when enabled. is_first_or_last is not required when setting a feature, the anchor is added in find_config_with_features().
Don't make the PG interfaces automatically L3 enabled, this way we can have tests that check the L3 protocol disbaled behaviour.
Change-Id: Icef22a920b27ff9cec6ab2da6b05f05c532cb60f
Signed-off-by: Neale Ranns <nranns@cisco.com>
