This patch is causing DPDK to provide bad MAC address
for legacy virtio interfaces.
Change-Id: I526cd35a38164ede80a8ab6decb9e0d1ebfad723
Signed-off-by: Damjan Marion <damarion@cisco.com>
Using -march=native was causing SIGILLs on Atoms.
Change-Id: I98c7fdaa139e3db70c972950dc9c167bf5803656
Signed-off-by: Damjan Marion <damarion@cisco.com>
The mac_addr_add callback function was simply replacing the primary MAC
address instead of adding new ones and the mac_addr_remove callback would
only remove the primary MAC form the adapter. Fix the functions to add or
remove new address. Allow up to 64 MAC addresses per port.
Change-Id: Ieff396ae27505c4c09f028911eff907757b03c7d
Signed-off-by: Steve Shin <jonshin@cisco.com>
in rte_eth_dev_config_restore() routine. Added default MAC replay as well.
Fixes: 4bdefaade6d1 ("ethdev: VMDQ enhancements")
Change-Id: I646799477e9a6f2fdeff7a52a76d216ef91115e9
Signed-off-by: Steve Shin <jonshin@cisco.com>
Build Cryptodev IPsec support by default when DPDK is enabled but only build
hardware Cryptodev PMDs.
To enable Cryptodev support, a new startup.conf option for dpdk has been
introduced 'enable-cryptodev'.
During VPP init, if Cryptodev support is not enabled or not enough cryptodev
resources are available then default to OpenSSL ipsec implementation.
Change-Id: I5aa7e0d5c2676bdb41d775ef40364536a081956d
Signed-off-by: Sergio Gonzalez Monroy <sergio.gonzalez.monroy@intel.com>
igb_uio is anyway build out of source from dkms package
so there is no need to build it here.
Also, this creates issues in cases where kernel headers are not
available (i.e. building inside containers).
Change-Id: I270598a94dc67ad0b31e7f0db9ed6bd6fc8cfe30
Signed-off-by: Damjan Marion <damarion@cisco.com>
Due to external library dependency support for Mellanox
devices is disabled. To enable it uncoment following line:
vpp_uses_dpdk_mlx5_pmd = yes
in build-data/platforms/vpp.mk and install OFED libraries.
Change-Id: I131d52b5d449a958349f31f9cc04311948f78b71
Signed-off-by: Damjan Marion <damarion@cisco.com>
This patch for dpdk 16.11 enables the use of shallow
virtio descriptors when VERSION_1 is set.
More info on DPDK patchwork:
http://dpdk.org/dev/patchwork/patch/17340/
Change-Id: I28cde77ed5a3588921d00da50678debfe0338b08
Signed-off-by: Pierre Pfister <ppfister@cisco.com>
DPDK Cryptodev support and related IPsec ESP nodes using DPDK Cryptodev APIs.
When DPDK Cryptodev support is enabled, the node graph is modified by adding
and replacing some of the nodes.
The following nodes are replaced:
* esp-encrypt -> dpdk-esp-encrypt
* esp-decrypt -> dpdk-esp-decrypt
The following nodes are added:
* dpdk-crypto-input : polling input node
* dpdk-esp-encrypt-post : internal node
* dpdk-esp-decrypt-post : internal node
Change-Id: I6dca9a890abaf4fb2a4fffce3fd08ac013e4d701
Signed-off-by: Zhang, Roy Fan <roy.fan.zhang@intel.com>
Signed-off-by: Sergio Gonzalez Monroy <sergio.gonzalez.monroy@intel.com>
http://dpdk.org/dev/patchwork/patch/15610/
This change only includes patch for DPDK 16.07 as
DPDK 16.04 doesn't seem to compile for me.
Change-Id: I18d84456ef6a15aa308d5e14673a24cb4a7b6909
Signed-off-by: Pierre Pfister <ppfister@cisco.com>
This patch will temporary add the "dpaa2" driver support in VPP in-built DPDK v16.07
Change-Id: Ieb7005c73bdb72e5eac88e17c21474479ad087f0
Signed-off-by: Sachin <sachin.saxena@nxp.com>
There are now two 0007... patch files. So renaming one to 0008...
Change-Id: I82ab883db3436b1fce6b169065b257df052fe63c
Signed-off-by: John Lo <loj@cisco.com>
This crash happens because the device still has MSI configured,
the fix is to free the IRQ. Adding pending further investigation.
Change-Id: Ifcd3404fcc25fe27dcccc67d0dcf9d8f0ec18582
Signed-off-by: Todd Foggoa (tfoggoa) <tfoggoa@cisco.com>
Signed-off-by: Ray Kinsella <ray.kinsella@intel.com>
Patch to prevent the unthrottled message from spilling to syslog and
fill up disk space.
Change-Id: I239ca27a7568182217a675692e0be966fc3486f5
Signed-off-by: John Lo <loj@cisco.com>
Some applications may wish to define their own implentation of
usec delay other than the existing blocking one. The default
behavior remains unchanged.
Change-Id: I6cb626e7a5d9d985928aa266e522a849d264a2b2
Signed-off-by: Todd Foggoa (tfoggoa) <tfoggoa@cisco.com>
Signed-off-by: Ray Kinsella <ray.kinsella@intel.com>
Ensure the packet_type is reset before the buffer is used.
This can cause packets to be mishandled in systems with more than one type of driver in use.
Change-Id: I14ef9bd6be834d66d19bae36122b648450a9f7e6
Signed-off-by: Ray Kinsella <ray.kinsella@intel.com>
Signed-off-by: Todd Foggoa (tfoggoa) <tfoggoa@cisco.com>
Commit d9a2009a81089093645fea2e04b51dd37edf3e6f on DPDK.org, reverted the ptype functionality
from the ixgbe vPMD. Reverting this change pending a deeper analysis.
Change-Id: I2515f3d700b2a4922495ba9e63f202d679543d01
Signed-off-by: Ray <ray.kinsella@intel.com>
The PKT_RX_VLAN_PKT flag will be totally obsolete by 16.11. We still need
this ENIC driver patch for 16.07.
Change-Id: I287035525d2d1b5313e88e9e74b6310536de2c32
Signed-off-by: John Lo <loj@cisco.com>
Change the default DPDK version to 16.07, and rename the indicated
patch directory. Use the native vhost-user driver.
Change-Id: Ie3d17e90e363ce86f0233b58c152de683b5d9456
Signed-off-by: Dave Barach <dave@barachs.net>
Author: Nelson Escobar <neescoba@cisco.com>
Date: Mon Jun 13 17:24:41 2016 -0700
We did not properly set the rq pointers we pass up to dpdk when
rx scatter was introduced. This resulted in segfaults whenever
more than one rq was being used.
Change-Id: I77a9793ea9035baa1ada77d3af7bc83baf58d097
Signed-off-by: Shesha Sreenivasamurthy <shesha@cisco.com>
DPDK vhost-user support is disabled due to significan changes
in the DPDK vhost-user code which are not compatible with current
VPP code.
Change-Id: I3f0d28cb75f6370282ec7e33d57cbfb77e1a3ce1
Signed-off-by: Damjan Marion <damarion@cisco.com>
When ENIC ports are used as slaves to a bonded interface, these patches
enable traffic on bonded interface to resume properly on admin down and
then up of the bonded interface.
Change-Id: I339926010da614068417c72009b7af2f892890ce
Signed-off-by: John Lo <loj@cisco.com>
Also clear x-bit for old patch files 0013-xxx and 0014-xxx.
Change-Id: I217fdbfb32cef1ae575c668270d3baf593e688c6
Signed-off-by: John Lo <loj@cisco.com>
This change should improve DPDK performance on 40G+ NICs
with small packets.
It also removes ITR setting for i40e devices, allowing driver to set default.
Change-Id: I70761b155e48fb0281f7c231516d83027bd16ca2
Signed-off-by: Damjan Marion <damarion@cisco.com>
Upstreaming of DPAA2 driver changes is in progress.This patch will
temporary add the support in VPP in built DPDK.
Two types of changes:
1. Driver specfic independent files. No impact on any other functionality.
2. Changes in common EAL framework. These changes are done in compile time DPAA2
specific flag, so no impact is expected on other existing features if not
compiling for DPAA2.
Change-Id: I02abe7189313835b51ff654b4d7e566bc0fb8327
Signed-off-by: Sachin <sachin.saxena@nxp.com>
The tarball repository fast.dpdk.org is fast and reliable enough
to be used in VPP build process.
Change-Id: Ifaae57d6f8308127b93fc51b2a2a863da5766cd2
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Check packet for presence of VLAN tag in the MAC header and set
the PKT_RX_VLAN_PKT flag to trigger sub-interface lookup in VPP
ethernet-input node.
Change-Id: Iadbfc59d08ef85efb936c88323a90194f3cd656f
Signed-off-by: John Lo <loj@cisco.com>
