Type: fix
in transport mode the header sequence is:
MAC - IP (tun) - ESP - GRE - L2
so popping the GRE header is done in the ESP decrypt node.
Change-Id: Ia125eb65b9300368617d2bffca09683851e43be0
Signed-off-by: Neale Ranns <nranns@cisco.com>
Type: feature
- ip-neighbour: generic neighbour handling; APIs, DBs, event handling,
aging
- arp: ARP protocol implementation
- ip6-nd; IPv6 neighbor discovery implementation; separate ND,
MLD, RA
- ip6-link; manage link-local addresses
- l2-arp-term; events separated from IP neighbours, since they are not
the same.
vnet retains just enough education to perform ND/ARP packet
construction.
arp and ip6-nd to be moved to plugins soon.
Change-Id: I88dedd0006b299344f4c7024a0aa5baa6b9a8bbe
Signed-off-by: Neale Ranns <nranns@cisco.com>
This test should be fixed or removed.
EXTENDED_TESTS should not become "BROKEN_TESTS"
Type: test
Change-Id: Id998f0d3b7bd31100f917d076fbd7ddb46d99ed2
Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
Configure n-tuple classifier filters which apply to the vpp packet
tracer.
Update the documentation to reflect the new feature.
Add a test vector.
Type: feature
Signed-off-by: Dave Barach <dave@barachs.net>
Change-Id: Iefa911716c670fc12e4825b937b62044433fec36
This change fixes the error message, which would previously report
mismatch on IPv6 layer instead of TCP layer.
Type: fix
Change-Id: Ie78779685362a420d155f928b3cdb341bc3fb8bc
Signed-off-by: Klement Sekera <ksekera@cisco.com>
Type: test
This reverts commit 087c811b63.
Change-Id: Ica12597f27d5a75c33c12c2d27a227dc4866adcb
Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
- Note: This was not caught by CI because the VPP 'make verify'
target always build libvom.so
Type: fix
Fixes: f0797d130
Signed-off-by: Dave Wallace <dwallacelf@gmail.com>
Change-Id: I8663e317e4e793c386b09d1cb887133de1e43faf
vapi.connect() only raises subclasses of vpp_papi.VPPIOError.
vapi.disconnect() doesn't raise any exceptions, removed uneeded try block.
Type: test
Change-Id: Ide6e6db298b205f14382065862e358757619a5ba
Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
Type: feature
the fib_source_t enum alone no longer defines the priority and
behaviour, instead each source must be allocated these attributes.
This allows the creation of other sources by the plugins (and
soon over the API).
Signed-off-by: Neale Ranns <nranns@cisco.com>
Change-Id: I890ee820fbc16079ee417ea1fbc163192806e853
This patch addresses the functionality that is
missing for distributed make test source files.
In addition it extends the concept of colocating
test source code with functional source code
(eg. src/vcl/test). It also cleans up deficiencies
in the make test makefiles.
NOTE: Due to the way sphinx document tools work,
all test, all of the make test python code is
gathered using soft links into the directory:
.../build-root/build-test/src
Change summary:
- Remove 'make test' help details from
main makefile help output to reduce clutter
and redundant help output
- Move all generated build output to
.../build-root/build-test
- Move test_vcl.py as first usecase for
distributed core feature make test code
- Add test-wipe-all target and fix wipe targets
to remove all generated files
- Fix 'make test-doc' to generate module
documentation for all source files
- Remove unused targets in test/doc/Makefile
- Fix 'make test-shell'
- Fix test/ext Makefile to not generate
bogus output
Type: fix
Fixes: a43c93f855
Change-Id: Icc2ddb81d474081c3ede4548ecd7a0624651f62d
Signed-off-by: Dave Wallace <dwallacelf@gmail.com>
Use consistent API types.
Type: fix
Change-Id: Ib5b1efa76f0a9cecc0bc146f8f8a47c2442fc1db
Signed-off-by: Jakub Grajciar <jgrajcia@cisco.com>
Signed-off-by: Ole Troan <ot@cisco.com>
Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
add the ability to override the default timeout value on a per-call
basis.
Use:
rv = self.vapi.papi.cli_inband(cmd='wait 10', _timeout=15)
Type: feature
Change-Id: Ia90a58586a1f63e02118599a2a4b7141e5a0b90d
Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
When running exec scripts, there can be a need to wait between statements.
Type: feature
Change-Id: I2a45b390697e09fc222358c9354f28e3368a06ba
Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
if the adj source is not active then there is no existing cover
during a cover update
Type: fix
Ticket: VPP-1803
Signed-off-by: Neale Ranns <nranns@cisco.com>
Change-Id: Ie912f1c99345de4fb012bdcd97b443098d4a7351
Type: feature
from the API doc, a table replace is:
"
The use-case is that, for some unspecified reason, the control plane
has a very different set of entries it wants in the table than VPP
currently has. The CP would thus like to 'replace' VPP's current table
only by specifying what the new set of entries shall be, i.e. it is not
going to delete anything that already eixts.
the CP delcartes the start of this procedure with this begin_replace
API Call, and when it has populated all the entries it wants, it calls
the below end_replace API. From this point on it is of coursce free
to add and delete entries as usual.
The underlying mechanism by which VPP implements this replace is
purposefully left unspecified.
"
In the FIB, the algorithm is implemented using mark and sweep.
Algorithm goes:
1) replace_begin: this marks all the entries in that table as 'stale'
2) download all the entries that should be in this table
- this clears the stale flag on those entries
3) signal the table converged: ip_table_replace_end
- this removes all entries that are still stale
this procedure can be used when an agent first connects to VPP,
as an alternative to dump and diff state reconciliation.
Change-Id: I168edec10cf7670866076b129ebfe6149ea8222e
Signed-off-by: Neale Ranns <nranns@cisco.com>
This fix was first made in
commit fdea5c6a00
but was subsequently lost in
commit 053204ab03
Added unit test for setting VTR on a non-sub-interface to
help ensure no future regressions of this ability.
Type: fix
Change-Id: I71ce2684fb72383741455829ae2d397ea2e95eae
Signed-off-by: Jon Loeliger <jdl@netgate.com>
This provides a functional interface to IP fragmentation.
Allowing external features to fragment. Supports
arbitrary encap size, for e.g. MPLS or inner fragmentation
of tunnels.
This also removed dual loop in MAP that was fundamentally broken.
Type: fix
Signed-off-by: Ole Troan <ot@cisco.com>
Change-Id: Ia89ecec8ee3cbe2416edbe87630fdb714898c2a8
Signed-off-by: Ole Troan <ot@cisco.com>
APIs for dedicated IPSec tunnels will remain in this release and are
used to programme the IPIP tunnel protect. APIs will be removed in a
future release.
see:
https://wiki.fd.io/view/VPP/IPSec
Type: feature
Change-Id: I0f01f597946fdd15dfa5cae3643104d5a9c83089
Signed-off-by: Neale Ranns <nranns@cisco.com>
Raw('\xaf) and Raw(b'\xaf) are two quite different things in python 2 versus 3.
In most cases this didn't make a difference, apart from those cases where length
of payload actually mattered.
Type: fix
Signed-off-by: Ole Troan <ot@cisco.com>
Change-Id: I3cba5c1486e436a3ca8aa10a7b393da75aa9f6b9
