- Required for Ubuntu 24.04 LTS jobs
- temporarily disable TestIpsecEsp1 and
TestIpsecAhAll tests until a patch can
be added to fix them
Type: test
Change-Id: I1ae7b170117182c3252629bbbb770775e2c496c9
Signed-off-by: Benoît Ganne <bganne@cisco.com>
Signed-off-by: Dave Wallace <dwallacelf@gmail.com>
When an application namespace is added, we call session_table_is_alloced
to see if we need to allocate a new session table. That check returns true
even if we removed the session table.
The fix is when we delete an application's global session table,
we need to invalidate fib_index_to_table_index.
Fixed test_vcl test script to run two tests back to back.
The 1st test deletes the application namespace at the end.
The 2nd test adds the application namespace in the beginning.
Type: fix
Fixes: 67bae20b05cb46e5f6d19afeaf1f7a52a5309d59
Change-Id: I67f5cc1b726a07659597a9479df011717db08d0a
Signed-off-by: Steven Luong <sluong@cisco.com>
lock the vrf table when adding an application namespace and
unlock the vrf table when deleting an application namespace.
Free the session table when no more application namespace
uses it anymore to avoid memory leaks.
Type: fix
Change-Id: I10422c9a3b549bd4403962c925e29dd61a058eb0
Signed-off-by: Steven Luong <sluong@cisco.com>
Introduce "none", "all" and "failed" options for --decode-pcaps
parameter. Keep "failed" as default to be consistent with current
behaviour. Add missing documentation to test/Makefile and passthrough to
Makefile.
Rationale: running tshark binary takes about 100-150ms and if there are
thousands of pcap files, it takes minutes to decode them. This might not
be desirable if rerunning the tests repeatedly during development.
Type: improvement
Change-Id: Ie033521d51d18b9d499b9bc40fe6eff21c94622d
Signed-off-by: Klement Sekera <klement.sekera@gmail.com>
Check and skip VPP_EXCLUDED_PLUGINS tests for most of plugins.
Type: improvement
Signed-off-by: Dmitry Valter <d-valter@yandex-team.com>
Change-Id: I23fd3666729251c639aa8da72a676058e3f5bb4e
In some cases we do not need multicast support. Making it optional helps
scaling to high number of VRFs, by reducing the control plane operations
and memory consumption.
Type: improvement
Change-Id: Ib34ed3fe2806e2f4624981da4e4a3c49c69f70be
Signed-off-by: Benoît Ganne <bganne@cisco.com>
Also rework the logic so the skipping of marked Ubuntu 22.04 occurs at framework level
Leave debian11 special cases as-is.
Type: fix
Change-Id: I481eb32cd1a0860935482e9f930ced409da653c9
Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
Do not mark drop paths as imported to avoid crashes on invalid table lookup.
```
vpp[8478]: /build/Vpp2310/source/src/vnet/fib/fib_table.c:35 (fib_table_get) assertion `! pool_is_free (ip4_main.fibs, _e)' fails
#9 0x00007ff21785da1d in _clib_error () from /lib/x86_64-linux-gnu/libvppinfra.so.23.10
#10 0x00007ff218087698 in fib_table_get (index=4294967295, proto=FIB_PROTOCOL_IP4) at /build/Vpp2310/source/src/vnet/fib/fib_table.c:35
#11 0x00007ff218087a37 in fib_table_lookup_exact_match (fib_index=4294967295, prefix=0x7ff0eae0d354) at /build/Vpp2310/source/src/vnet/fib/fib_table.c:100
#12 0x00007ff2180bc938 in fib_attached_export_import (fib_entry=0x7ff0eceac3e0, export_fib=4294967295) at /build/Vpp2310/source/src/vnet/fib/fib_attached_export.c:264
#13 0x00007ff218098ade in fib_entry_post_flag_update_actions (fib_entry=0x7ff0eceac3e0, old_flags=FIB_ENTRY_FLAG_NONE, new_fib_index=4294967295) at /build/Vpp2310/source/src/vnet/fib/fib_entry.c:624
#14 0x00007ff218098b90 in fib_entry_post_install_actions (fib_entry=0x7ff0eceac3e0, source=FIB_SOURCE_API, old_flags=FIB_ENTRY_FLAG_NONE) at /build/Vpp2310/source/src/vnet/fib/fib_entry.c:674
#15 0x00007ff218098cce in fib_entry_create (fib_index=1, prefix=0x7ff0d3244d80, source=FIB_SOURCE_API, flags=FIB_ENTRY_FLAG_NONE, paths=0x7ff0eac15ab8) at /build/Vpp2310/source/src/vnet/fib/fib_entry.c:712
#16 0x00007ff218088db4 in fib_table_entry_update (fib_index=1, prefix=0x7ff0d3244d80, source=FIB_SOURCE_API, flags=FIB_ENTRY_FLAG_NONE, paths=0x7ff0eac15ab8) at /build/Vpp2310/source/src/vnet/fib/fib_table.c:799
#17 0x00007ff2180c026c in fib_api_route_add_del (is_add=1 '\001', is_multipath=0 '\000', fib_index=1, prefix=0x7ff0d3244d80, src=FIB_SOURCE_API, entry_flags=FIB_ENTRY_FLAG_NONE, rpaths=0x7ff0eac15ab8) at /build/Vpp2310/source/src/vnet/fib/fib_api.c:485
#18 0x00007ff217d4b6dd in ip_route_add_del_t_handler (mp=0x7ff0eb08b998, stats_index=0x7ff0d3244dc8) at /build/Vpp2310/source/src/vnet/ip/ip_api.c:718
#19 0x00007ff217d4b986 in vl_api_ip_route_add_del_t_handler (mp=0x7ff0eb08b998) at /build/Vpp2310/source/src/vnet/ip/ip_api.c:789
```
Type: fix
Fixes: 4b08632748727486e7ebfdcf4d992743595bc500
Signed-off-by: Dmitry Valter <d-valter@yandex-team.com>
Change-Id: I647899533771c35f44c9ecde517a30f111b36ad9
- Remove code from test report that is effectively
untested and categorize based on reason for lack
of testing.
Type: test
Change-Id: I6ca5444055b3a81a4880945b6845afc867556277
Signed-off-by: Dave Wallace <dwallacelf@gmail.com>
Type: fix
This patch fixes the missing UDP port check in IPsec NAT-T
case. As of RFC3948 UDP encapped ESP traffic should have
destination port ID of 4500, which was missing.
The related tests are updated with this port ID, too.
Change-Id: I73ecc6a93de8d0f4b642313b0f4d9c2f214a7790
Signed-off-by: Fan Zhang <fanzhang.oss@gmail.com>
Type: fix
fib_api_path_decode() is utilized by the IP route API call
to translate the path from the API to the fib_route_path_t
structure. The ip_route_add_del_handler_t function initializes
the fib_route_path_t structure to zeros, consequently setting
the sw_if_index value to 0, which is a valid value in VPP.
Typically, the default VRF (Virtual Routing and Forwarding)
has a local interface at index 0, leading to normal functionality.
However, a custom VRF table without any interface will result
in a crash.
The issue arises because the DROP route in fib_api_path_decode()
does not override the sw_if_index value with the one provided
in vl_api_fib_path_t. Subsequently, when this sw_if_index is
attempted to be resolved in the VRF table where the interface
does not exist, it leads to a crash.
This patch addresses the problem by setting the sw_if_index of
fib_route_path_t to the sw_if_index value of the API path.
To reproduce the issue, please remove the fix and run the following command:
make test-debug TEST=test_ip4.TestIPv4RouteLookup.test_exact_match
Change-Id: I5d72e91e5c701e749a92873941bee7b7b5eabd41
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
When the NIC does not support mac filter, we rely on ethernet-input
node to do the destination mac check, ie, when the interface is in L3,
the mac address for the packet must be the mac address of the
interface where the packet arrives. This works fine in ethernet-input
node when all packets in the frame might have different interfaces, ie,
ETH_INPUT_FRAME_F_SINGLE_SW_IF_ID is not set in the frame. However,
when all packets are having the same interface,
ETH_INPUT_FRAME_F_SINGLE_SW_IF_ID is set, ethernet-input node goes
through the optimized routine eth_input_single_int -> eth_input_process_frame.
That is where dmac check has a bug when all packets in the frame are
either, ip4, ip6, or mpls without vlan tags. Because without vlan tags,
the code handles all packets in fast path and ignores dmac check.
With vlan tags, the code goes to slow path where dmac check is handled
properly.
The fix is to check if we have a bad dmac in the fast path and force the
code to go to slow path which will handle dmac check properly.
Also do a wholesale correction on all the testcases which do not use
the proper dmac when sending L3 packets.
Type: fix
Change-Id: I73153a805cecdc24c4eefcc781676de04737ae2c
Signed-off-by: Steven Luong <sluong@cisco.com>
This reverts commit 71c32a898941e32b5d4f865b50fbe775560c582d.
Type: fix
Reason for revert: vnet pinning is not considered in this patch.
This causes keywords 'workers' and 'skip-cores' to be broken,
as well as keyword 'main-core auto' introduced in this patch.
If this patch is ever reconsidered, it must account for vnet
pinning fix in commit https://gerrit.fd.io/r/c/vpp/+/40711.
Change-Id: I1f3154a6c7e830b100f824375aa00e95b192f7f3
Signed-off-by: hsandid <halsandi@cisco.com>
After adding a path to the default route, the prefix still be there
in the table as it is a mandatory prefix. However, the registry hence
fail to remove the route from VPP.
Type: fix
Change-Id: Ic4ad72455ac7a1a2f1d8baba59a7a3afe1610726
Signed-off-by: Maxime Peim <mpeim@cisco.com>
In case of multiple path within tunnel, mpls lookup node
computes lb hash with mpls_compute_flow_hash config value 0,
so only mpls label and l4 ports gets accounted, not 5-tuple.
This leads to flow traffic polarization and disbalance over
mpls paths.
Use mpls hash config from lb instead, usually it'll be
MPLS_FLOw_HASH_DEFAULT with 5-tuple plus flowlabel.
As optimization, fix flow hash reuse from the previous lookup
node if present, like ip_lookup does. Previously mpls lookup
always calcs the hash.
Test lb distribution for both cases.
Also, use the same flow hash hex format in ip4/ip6 and mpls
traces for easier reading, most code changes is due fixstyle
formatting.
Type: fix
Signed-off-by: Vladislav Grishenko <themiron@yandex-team.ru>
Change-Id: Ib89e1ab3edec14269866fe825a3e887d6c817b7c
On unnumbered interfaces, ARP fails because there is no attached route.
Allow replies to peer-to-peer addresses on unnumbered interfaces:
eg. 192.0.2.1/32 <-> 192.0.2.2/32
Type: fix
Change-Id: Ibeb8d8ebc8d58d5bfb0724739a17694e0217356e
Signed-off-by: Pim van Pelt <pim@ipng.nl>
In run_in_venv_with_cleanup.sh, sed was changed to gsed to allow the
script to run properly on FreeBSD because the sed script uses an
expression that is specific to the gnu sed. Gnu sed is available to
be invoked as gsed on FreeBSD systems, but there is no executable or
symlink which allows sed to be run by the name gsed on ubuntu 22.04.
Check for the existence of gsed. If it's found, use it. Otherwise, just
use sed.
Type: fix
Fixes: b3c863eae4
Signed-off-by: Matthew Smith <mgsmith@netgate.com>
Change-Id: I487197e486f500711aa3e87ec7ba899a53606b40
l2 tunnels like vxlan, gtpu, geneva use vnet_l2_compute_flow_hash() to
compute flow hash for udp src port entropy. In case of inner mpls tunnels
to the same lsr ethernet src and dst macs are the same, so l2 flow hash
is also the same leading to no src port entropy and the only rss queue
overflow on receiver side.
Fix it for all the possible vnet_l2_compute_flow_hash callers by making
mpls playload hash in additon to ip4/ip6. Visible performance impact is
not expected as it's only one check for mpls ethertype for common cases.
Type: fix
Signed-off-by: Vladislav Grishenko <themiron@yandex-team.ru>
Change-Id: I69153d42fb3d7c094a670c674fac8d14039c626a
Type: feature
Auto core pinning now fetches vpp cpu affinity list
using pthread api. This enables us to do core-pinning in
environments where the host cpu list does not necessarily align
with cpus available to vpp
Change-Id: Ife8c2a2351c08c5c6c4fdf7c729eeff2697bc39a
Signed-off-by: hsandid <halsandi@cisco.com>
FreeBSD doesn't have an easy mechanism to discover CPU features
currently. For tests declare we don't support anything we are asked
about.
Add the FreeBSD spelling of amd64 while we are here.
Type: improvement
Change-Id: I3eb5db856ee5cbc71250e47eee619e2f620de33a
Signed-off-by: Tom Jones <thj@freebsd.org>
For portability we use errno defines rather than explicit int values
when checking for errors.
Type: improvement
Change-Id: Ib5fc1db357da150d008d5a11bef5dbc7ec354cfb
Signed-off-by: Tom Jones <thj@freebsd.org>
The offload should be handled by gso node or by the NIC
if the latter has the relevant capabilities. But ip midchain
is missing the support for buffer offload metadata in case
of GSO packet.
This patch adds the relevant support to add the buffer metadata
if the packet is GSO/IPIP to be handled accordingly.
Type: improvement
Change-Id: I17f5d71bf4c5f43a85ca3f2fbebfa1426b42ef69
Signed-off-by: Arthur de Kerhor <arthurdekerhor@gmail.com>
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
Using unittest skip instead of print unclutters display by not printing
skip messages when not applicable, e.g. when somebody runs tests which
are unrelated to netns tests, e.g. with FILTER=vapi.
Type: fix
Fixes: e416893a59
Change-Id: Ie09e213249aa47da7e4ff484c3d072fbce3c2001
Signed-off-by: Klement Sekera <klement.sekera@gmail.com>
IPFIX buffers are stored on a per worker thread basis. Currently, the
flush callbacks will flush only buffers stored for the main thread. And
buffers for worker threads will not be sent until their size reach the
path MTU configured for the exporter. So if traffic is constant, the
problem will unlikely to be visible. Buffers will be sent once they
reach the maximum size. However, if traffic stops at some point and
flush is triggered in order to make the plugin send all currently
buffered data, this will not happen. And collectors will not receive
that data. The plugin will keep the remaining data until traffic starts
again, the buffers reach the maximum size, and be sent.
With this fix, flush buffers for worker threads and for the main thread
when the flush callbacks are triggered.
This will allow to remove @tag_fixme_vpp_workers from the unit tests
that don't set timers. The tests that set timers will still be failing
for other multi-worker related problems.
Type: fix
Change-Id: I9a7d9cef8ddbec7ee68c79309e48e7bc0953d488
Signed-off-by: Alexander Chernavin <achernavin@netgate.com>
BPF filter w/o optimization can take x2 - x3 more instructions,
causing significant slow down in fast path.
Enable pcap optimization by default via cli and introduce api v2
with pcap optimization control, keep v1 for a while as it exists
in previous release already.
Intriduce bpf filter cli dump, similar to tcpdump -d.
Also fix memleak, function name typo, cli pcap format hint and
add related tests.
Type: improvement
Signed-off-by: Vladislav Grishenko <themiron@yandex-team.ru>
Change-Id: I92b2b519e92326f1b8e1a4dda6a3e3edc52f87ad
Fix crash while adding intf-rx ip4 and ip6 routes via api due
invalid exporting of interface rx routes as attached.
Also, add missed route path via rx-ip6 cli support.
Type: fix
Signed-off-by: Vladislav Grishenko <themiron@yandex-team.ru>
Change-Id: I15711c8c0787398dd7e3baa4787019bb1f317666
In esp_encrypt_inline(), if two or more consecutive packets are
associated with the same SA which has no crypto or integrity algorithms
set, only the first one gets dropped. Subsequent packets either get sent
(synchronous crypto) or cause a segv (asynchronous crypto).
The current SA's index and pool entry are cached before it can be
determined whether the packet should be dropped due to no algorithms
being set. The check for no algorithms is only performed when the cached
SA index is different than the SA index for the current packet. So
packets after the first one associated with the "none" alg SA aren't
handled properly.
This was broken by my previous commit ("ipsec: keep esp encrypt pointer
and index synced") which fixed a segv that occurred under a different
set of circumstances.
Check whether each packet should be dropped instead of only checking
when a new SA is encountered.
Update unit tests:
- Add a test for no algs on tunnel interface which enables
asynchronous crypto.
- Send more than one packet in the tests for no algs.
Type: fix
Fixes: dac9e566cd16fc375fff14280b37cb5135584fc6
Signed-off-by: Matthew Smith <mgsmith@netgate.com>
Change-Id: I69e951f22044051eb8557da187cb58f5535b54bf
Split virtual interface tests in VPP into smaller and modular
tests for testing various interface types and features.
Type: test
Change-Id: Ic38af88379f75eee3090679d411edbdc8fd5d2e5
Signed-off-by: Naveen Joy <najoy@cisco.com>
RFC 7296 describes the way to rekey IKE SAs: to rekey an IKE SA,
establish a new equivalent IKE SA with the peer to whom the old
IKE SA is shared using a CREATE_CHILD_SA within the existing IKE
SA. An IKE SA so created inherits all of the original IKE SA's
Child SAs, and the new IKE SA is used for all control messages
needed to maintain those Child SAs.
Type: improvement
Signed-off-by: Atzm Watanabe <atzmism@gmail.com>
Change-Id: Icdf43b67c38bf183913a28a08a85236ba16343af
the error node is set to ip6_input in the inline funcition
associated with ip6_rewrite. Thus, error counters defined
for node ip6 rewrite are never used.
Type: fix
Change-Id: Id6bef633928b0fff9069498c2e39e9f5bea2cf9b
Signed-off-by: Arthur de Kerhor <arthurdekerhor@gmail.com>
VPP requires GNU Make to build, on GNU systems (such as Debian), GNU
Make is installed as 'make', typically with a symlink from 'gmake'.
On other systems (such as FreeBSD), 'make' is a BSD Make derriviative
and GNU Make is installed a 'gmake'.
Use $(MAKE) variable for make calls from within Makefiles. This
variable is set to the path of the calling make program, i.e.,
/usr/local/bin/gmake on a bsd system.
This is the recommended way to call make from Makefiles in the GNU Make
documentation.
Type: improvement
Change-Id: Id9162a34a0f8358f22090718087918dae31c0fce
Signed-off-by: Tom Jones <thj@freebsd.org>
VPP requires bash for all shell scripts. Align shebang lines in build
and test scripts to look up the location of bash rather than hard coding
'/bin/bash'.
Look up the location of bash for makefiles.
Type: improvement
Change-Id: I23b705d81d60389fa8af61c680cf0abd74f0ea24
Signed-off-by: Tom Jones <thj@freebsd.org>
When sanity test is not done, API files are not loaded until the
first test case is run. Hence, it is not possible to use enums, etc.
outside of a test class.
By preloading API files before running any tests, it prevents its
issue.
Type: fix
Change-Id: I8730150374e6c5f8d6933ec037811372ac2a8da0
Signed-off-by: Maxime Peim <mpeim@cisco.com>
Add an urpf_interface_dump() API call, with optional sw_if_index.
If either a mode or a table is specified in any given interface
address family and direction, return it in a list, otherwise omit
it.
TESTED:
create loopback interface instance 0
create loopback interface instance 1
create loopback interface instance 2
create loopback interface instance 3
ip6 table add 8298
set urpf ip4 rx loose loop1
set urpf ip6 tx off loop2 table 8298
API call urpf_interface_dump(sw_if_index=~1) returns:
[
urpf_interface_details(_0=658, context=2, sw_if_index=2, is_rx=True, mode=<vl_api_urpf_mode_t.URPF_API_MODE_LOOSE: 1>, af=<vl_api_address_family_t.ADDRESS_IP4: 0>, table_id=0),
urpf_interface_details(_0=658, context=2, sw_if_index=3, is_rx=False, mode=<vl_api_urpf_mode_t.URPF_API_MODE_OFF: 0>, af=<vl_api_address_family_t.ADDRESS_IP6: 1>, table_id=8298)
]
Type: improvement
Change-Id: I1ded5c445dc07dab73ea41b817b5827b72ca79d4
Signed-off-by: pim@ipng.nl
