ligang/vpp
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity
265 Commits 30 Branches 141 Tags
d6f5b96e6f4e1d5022b18f0ff575dce1d19e931c
Commit Graph

17 Commits

Author SHA1 Message Date
John Lo
d90df1820a Add dpdk vmxnet3 driver patch and init.c change to allow jumbo packets 
Change-Id: I9d7f8b9a0543d885ed10908b859d52a80bf89f56
Signed-off-by: John Lo <loj@cisco.com>
 2016-03-23 16:42:33 -04:00
Jean-Mickael Guerin
966a8b868b dpdk: fix link error 
/usr/bin/ld: -f may not be used without -shared
collect2: error: ld returned 1 exit status

Indeed an extra "-fPIC" is given to ld, see the -Wl,-fPIC below:

gcc -pie -fPIC -pthread  -march=native -DRTE_MACHINE_CPUFLAG_SSE -DRTE_MACHINE_CPUFLAG_SSE2 -DRTE_MACHINE_CPUFLAG_SSE3 -DRTE_MACHINE_CPUFLAG_SSSE3 -DRTE_MACHINE_CPUFLAG_SSE4_1 -DRTE_MACHINE_CPUFLAG_SSE4_2 -DRTE_MACHINE_CPUFLAG_AES -DRTE_MACHINE_CPUFLAG_PCLMULQDQ -DRTE_MACHINE_CPUFLAG_AVX -DRTE_COMPILE_TIME_CPUFLAGS=RTE_CPUFLAG_SSE,RTE_CPUFLAG_SSE2,RTE_CPUFLAG_SSE3,RTE_CPUFLAG_SSSE3,RTE_CPUFLAG_SSE4_1,RTE_CPUFLAG_SSE4_2,RTE_CPUFLAG_AES,RTE_CPUFLAG_PCLMULQDQ,RTE_CPUFLAG_AVX  -I/home/jmg/dev/vpp/build-root/install-vpp_debug-native/dpdk/include -include /home/jmg/dev/vpp/build-root/install-vpp_debug-native/dpdk/include/rte_config.h -O3 -W -Wall -Werror -Wstrict-prototypes -Wmissing-prototypes -Wmissing-declarations -Wold-style-definition -Wpointer-arith -Wcast-align -Wnested-externs -Wcast-qual -Wformat-nonliteral -Wformat-security -Wundef -Wwrite-strings -D_GNU_SOURCE  -Wl,-Map=test.map,--cref -o test commands.o test.o test_pci.o test_prefetch.o test_byteorder.o test_per_lcore.o test_atomic.o test_malloc.o test_cycles.o test_spinlock.o test_memory.o test_memzone.o test_ring.o test_ring_perf.o test_pmd_perf.o test_rwlock.o test_mempool.o test_mempool_perf.o test_mbuf.o test_logs.o test_memcpy.o test_memcpy_perf.o test_hash.o test_thash.o test_hash_perf.o test_hash_functions.o test_hash_scaling.o test_debug.o test_errno.o test_tailq.o test_string_fns.o test_cpuflags.o test_mp_secondary.o test_eal_flags.o test_eal_fs.o test_alarm.o test_interrupts.o test_version.o test_func_reentrancy.o test_cmdline.o test_cmdline_num.o test_cmdline_etheraddr.o test_cmdline_portlist.o test_cmdline_ipaddr.o test_cmdline_cirbuf.o test_cmdline_string.o test_cmdline_lib.o test_red.o test_sched.o test_meter.o test_kni.o test_common.o test_devargs.o virtual_pmd.o packet_burst_generator.o test_link_bonding.o test_link_bonding_mode4.o test_link_bonding_rssconf.o test_pmd_ring.o test_pmd_ring_perf.o test_cryptodev_perf.o test_cryptodev.o test_kvargs.o -Wl,-pie -Wl,-fPIC -Wl,--no-as-needed -Wl,-export-dynamic -L/home/jmg/dev/vpp/build-root/install-vpp_debug-native/dpdk/lib -Wl,-g -L/home/jmg/dev/vpp/build-root/install-vpp_debug-native/dpdk/lib -Wl,--whole-archive -Wl,-ldpdk -Wl,--start-group -Wl,-lrt -Wl,-lm -Wl,-ldl -Wl,--end-group -Wl,--no-whole-archive

Fixed by unsetting the flags -pie -fPIC out of LDFLAGS, these are not
options for the linker.

$ gcc -v
Using built-in specs.
COLLECT_GCC=gcc
COLLECT_LTO_WRAPPER=/usr/lib/gcc/x86_64-linux-gnu/5/lto-wrapper
Target: x86_64-linux-gnu
Configured with: ../src/configure -v --with-pkgversion='Ubuntu 5.3.1-10ubuntu2' --with-bugurl=file:///usr/share/doc/gcc-5/README.Bugs --enable-languages=c,ada,c++,java,go,d,fortran,objc,obj-c++ --prefix=/usr --program-suffix=-5 --enable-shared --enable-linker-build-id --libexecdir=/usr/lib --without-included-gettext --enable-threads=posix --libdir=/usr/lib --enable-nls --with-sysroot=/ --enable-clocale=gnu --enable-libstdcxx-debug --enable-libstdcxx-time=yes --with-default-libstdcxx-abi=new --enable-gnu-unique-object --disable-vtable-verify --enable-libmpx --enable-plugin --with-system-zlib --disable-browser-plugin --enable-java-awt=gtk --enable-gtk-cairo --with-java-home=/usr/lib/jvm/java-1.5.0-gcj-5-amd64/jre --enable-java-home --with-jvm-root-dir=/usr/lib/jvm/java-1.5.0-gcj-5-amd64 --with-jvm-jar-dir=/usr/lib/jvm-exports/java-1.5.0-gcj-5-amd64 --with-arch-directory=amd64 --with-ecj-jar=/usr/share/java/eclipse-ecj.jar --enable-objc-gc --enable-multiarch --disable-werror --with-arch-32=i686 --with-abi=m64 --with-multilib-list=m32,m64,mx32 --enable-multilib --with-tune=generic --enable-checking=release --build=x86_64-linux-gnu --host=x86_64-linux-gnu --target=x86_64-linux-gnu
Thread model: posix
gcc version 5.3.1 20160225 (Ubuntu 5.3.1-10ubuntu2)

Change-Id: Iffbebfbb625e8831822ec092bea88dea42f12930
Signed-off-by: Jean-Mickael Guerin <jean-mickael.guerin@6wind.com>
 2016-03-14 09:14:18 +00:00
John Lo
a6a8bfd48f More updated match to ENIC PMD for DPDK 2.2.0 including rx path optimization. 
Change-Id: I756940c9c1b2bb71d47caeb08ab34a2e954ddff6
Signed-off-by: John Lo <loj@cisco.com>
 2016-03-10 16:41:33 +00:00
John Lo
8b4d82cd4f Fix ENIC PMD not sending the first packet on TX. 
Change-Id: I615e9ca6f445092baa211098eb64f9553dd4c407
Signed-off-by: John Lo <loj@cisco.com>
 2016-02-26 20:42:04 +00:00
John Lo
a0fac5ac19 Fix link bonding PMD slave status polling path used by VIC ENIC driver. 
Change-Id: Ic9fc952b618477beb246974b33d753bf6fd47dde
Signed-off-by: John Lo <loj@cisco.com>
 2016-02-26 20:42:04 +00:00
John Lo
d9bf9abbab Add support of Ethernet link bonding utilizing DPDK link bonding 
poll mode driver library. The bonded interfaces to be created on
VPP startup is specified in the dpdk section of startup.conf
or qn.conf, using DPDK EAL command. Following is an example of a
dpdk section white listing PCI addressses of 4 ethernet interfacess
to be under VPP control plus two bonded interface and the PCI addresses
of the slaves in each:
dpdk { socket-mem 1024,1024
dev 0000:0f:00.0 dev 0000:10:00.0 dev 0000:11:00.0 dev 0000:12:00.0
vdev eth_bond0,mode=2,slave=0000:0f:00.0,slave=0000:11:00.0,xmit_policy=l34
vdev  eth_bond1,mode=2,slave=0000:10:00.0,slave=0000:12:00.0,xmit_policy=l34
}
Note that only balance XOR (mode 2) is supported and "xmit_policy=l34"
specifies to use layer 3 SIP/DIP and layer 4 Sport/Dport for load
balance. Using "xmit_policy=l2" for SMAC/DMAC or "xmit_policy=l23" for
SMAC/DMAC and SIP/DIP should also work.

Change-Id: Iaf6438686fa20cce893cb5a823b76e2886b4360b
Signed-off-by: John Lo <loj@cisco.com>
 2016-02-25 17:55:16 +00:00
Yoann Desmouceaux
ca0f3b3a43 dpdk: fix enic pmd driver tx function 
Adding a patch to fix DPDK 2.2.0 enic PMD driver TX function.

The enic PMD driver send function uses a constant offset instead of relying on the data_off in the mbuf to find the start of the packet.

Change-Id: Ic4f3be83865367306785a57e2694e0ccfa295c7b
Signed-off-by: Yoann Desmouceaux <ydesmouc@cisco.com>
 2016-02-22 13:27:50 +00:00
Yoann Desmouceaux
3c4869cdfa dpdk: fix enic pmd driver tx function 
Adding a patch to fix DPDK enic PMD driver TX function.

The enic PMD driver send function uses a constant offset instead of relying on the data_off in the mbuf to find the start of the packet.

Change-Id: I74dbcce949f08e39070a369d992a90586af140a6
Signed-off-by: Yoann Desmouceaux <ydesmouc@cisco.com>
 2016-02-19 10:56:13 +00:00
Damjan Marion
13f0718e64 Increase number of dpdk lcores to 256 
Change-Id: Ia0e228d02fd9f180ed9ca468074ab38d575e415e
Signed-off-by: Damjan Marion <damarion@cisco.com>
 2016-02-13 00:14:53 +00:00
Dave Barach
8501315d51 Disable EAL message spew which can easily fill /var/log 
Change-Id: I63da892d1c4148a54ea33c172986c854932beb01
Signed-off-by: Dave Barach <dave@barachs.net>
 2016-02-09 16:20:08 +00:00
Todd Foggoa
505488553a DPDK patch: Add missing init of packet_type field. 
This can cause packets to be mishandled in systems with more than
one type of driver in use.

Change-Id: I73ae91ff5d7a22fa542c3b39f6ccfe50437ec71b
Signed-off-by: Todd Foggoa <tfoggoa@cisco.com>
 2016-02-05 14:27:09 -05:00
Todd Foggoa
a9dc8c9e6a DPDK patch: Allow applications to override rte_delay_us() 
Some applications may wish to define their own implentation of
usec delay other than the existing blocking one. The default
behavior remains unchanged.

Change-Id: I699b2ed460763492502d22b7e8532514e0886ecd
Signed-off-by: Todd Foggoa <tfoggoa@cisco.com>
 2016-02-05 14:21:37 -05:00
Todd Foggoa
1d8dd705d7 DPDK patch: Fix a crash in igb_uio driver when the device is removed. 
Change-Id: I101166ebda1c06e20a3c89cd38786ce44b7ab5d5
Signed-off-by: Todd Foggoa <tfoggoa@cisco.com>
 2016-02-05 14:20:59 -05:00
Damjan Marion
eec5a51c12 Change default dpdk version to 2.2 
Change-Id: Iea686ed26d37539d60e52ac1205517512091edab
Signed-off-by: Damjan Marion <damarion@cisco.com>
 2016-02-02 15:00:35 +00:00
Damjan Marion
aed4d03268 remove igb_uio static pci id table patch, use new_id for all NICs 
Change-Id: I1db64d62c19c28b50f58f9d0b009e3e89e331f71
Signed-off-by: Damjan Marion <damarion@cisco.com>
 2016-02-01 23:47:41 +00:00
Damjan Marion
bce6b6a6bf Introduce support for DPDK 2.2 
Change-Id: Id2c7c4a949363a448a6715463dd81f701f046b93
Signed-off-by: Damjan Marion <damarion@cisco.com>
 2015-12-16 10:01:02 +01:00
Ed Warnicke
cb9cadad57 Initial commit of vpp code. 
Change-Id: Ib246f1fbfce93274020ee93ce461e3d8bd8b9f17
Signed-off-by: Ed Warnicke <eaw@cisco.com>
 2015-12-08 15:47:27 -07:00