17 Commits

Author SHA1 Message Date
Neale Ranns
cbe25aab3b ip: Protocol Independent IP Neighbors
Type: feature

 - ip-neighbour: generic neighbour handling; APIs, DBs, event handling,
aging
 - arp: ARP protocol implementation
 - ip6-nd; IPv6 neighbor discovery implementation; separate ND,
MLD, RA
 - ip6-link; manage link-local addresses
 - l2-arp-term; events separated from IP neighbours, since they are not
the same.

vnet retains just enough education to perform ND/ARP packet
construction.
arp and ip6-nd to be moved to plugins soon.

Change-Id: I88dedd0006b299344f4c7024a0aa5baa6b9a8bbe
Signed-off-by: Neale Ranns <nranns@cisco.com>
2019-12-17 10:56:20 +00:00
Neale Ranns
efd7bc2b1c tests: Remove the unrequired VPP IP address/prefix class wrappers
Type: refactor

Change-Id: I204f3f8eebc5f5d5a377e91262f91c615fd00168
Signed-off-by: Neale Ranns <nranns@cisco.com>
2019-11-15 13:19:20 +00:00
Renato Botelho do Couto
ead1e536d6 misc: Fix python scripts shebang line
Type: fix

Since CentOS 8, RPM build script doesn't accept '#!/usr/bin/env python'
as a valid shebang line.  It requires scripts to explicitly chose
between python2 or python3.

Change all to use python3 as suggested by Paul Vinciguerra.

Depends-On: https://gerrit.fd.io/r/23170

Signed-off-by: Renato Botelho do Couto <renato@netgate.com>
Change-Id: Ie72af9f60fd0609e07f05b70f8d96e738b2754d1
2019-11-05 21:08:59 +00:00
Ole Troan
f6dee6c8ba bonding: tests support python3
Type: fix
Signed-off-by: Ole Troan <ot@cisco.com>
Change-Id: I6cedb43af4437fdabce75f4a845629c5c2f96f6a
2019-10-21 20:53:14 +00:00
Steven Luong
a1876b84e5 bonding: add weight support for active-backup mode
Not all interfaces have the same characteristics within the bonding group.
For active-backup mode, we should do our best to select the slave that
performs the best as the primary slave. We already did that by preferring
the slave that is local numa. Sometimes, this is not enough. For example,
when all are local numas, the selection is arbitrary. Some slave interfaces
may have higher speed or better qos than the others. But this is hard to
infer.

One rule does not fit all. So we let the operator to optionally specify the
weight for each slave interface. Our primary slave selection rule is now
1. biggest weight
2. is local numa
3. current primary slave (to avoid churn)
4. lowest sw_if_index (for deterministic behavior)

This selection rule only applies to active-backup mode which only one slave
is used for forwarding traffic until it becomes unreachable. At that time,
the next "best" slave candidate is automatically promoted. The slaves are
sorted according to the preference rule when they are up. So there is no need
to find the next best candidate when the primary slave goes down.

Another good thing about this rule is when the down slave comes back up, it
is selected as the primary slave again unless there is indeed a "better"
slave than this down slave that were added during that period.

To set the weight for the slave interface, do this after the interface is
enslaved

set interface bond <interface-name> weight <value>

Type: feature

Signed-off-by: Steven Luong <sluong@cisco.com>
Change-Id: I59ced6d20ce1dec532e667dbe1afd1b4243e04f9
2019-09-06 16:07:59 +00:00
Jakub Grajciar
053204ab03 api: Cleanup APIs interface.api
Use of consistent API types for interface.api

Type: fix

Change-Id: I88206d7d0907cffd564031f73c9a996df2e5e21a
Signed-off-by: Jakub Grajciar <jgrajcia@cisco.com>
2019-08-20 09:57:10 +00:00
Zhiyong Yang
751e3f3824 bonding: add support for numa-only in lacp mode
If numa-only is set, Only slaves on local numa node
transmit pkts if have at least one, otherwise the bond
interface works as usual.

CLI change:
create bond mode lacp [load-balance { l2 | l23 | l34 } {numa-only}]
[hw-addr <mac-address>] [id <if-id>]

The new member "u8 numa_only;" is also added to bond_create_if_args_t.

Type: feature

Change-Id: Icdccedafb0738d8c9d4a5acce909ce562428c071
Signed-off-by: Zhiyong Yang <zhiyong.yang@intel.com>
2019-07-19 16:12:02 +00:00
Paul Vinciguerra
90cf21b5d8 Tests: Refactor tearDown show command logging, add lifecycle markers.
This change adds a consistent interface for adding test-specific show commands to
log.txt.

It also adds log markers for the execution of setUp[Class], tearDown[Class]
in the logs.

Change-Id: I7d42e396e594a59e866a7d55dac0af25548e657a
Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
2019-04-11 07:23:11 +00:00
Paul Vinciguerra
7f9b7f9f49 Tests Cleanup: Fix missing calls to setUpClass/tearDownClass.
Continuation/Part 2 of https://gerrit.fd.io/r/#/c/17092/

Change-Id: Id0122d84eaf2c05d29e5be63a594d5e528ee7c9a
Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
2019-04-10 14:37:40 +00:00
Ole Trøan
3b0d7e42f6 Revert "API: Cleanup APIs interface.api"
This reverts commit e63325e3ca03c847963863446345e6c80a2c0cfd.

Allow time for CSIT to accommodate.

Change-Id: I59435e4ab5e05e36a2796c3bf44889b5d4823cc2
Signed-off-by: ot@cisco.com
2019-03-15 17:34:06 +00:00
Jakub Grajciar
e63325e3ca API: Cleanup APIs interface.api
Use of consistent API types for interface.api

Change-Id: Ieb54cebb4ac96b432a3f0b41596718aa2f34885b
Signed-off-by: Jakub Grajciar <jgrajcia@cisco.com>
2019-03-15 10:24:22 +00:00
Paul Vinciguerra
9a6dafd569 Tests: use self.assertNotIn().
Many tests use self.assertEqual(error.find("failed"), -1)
Use self.assertNotIn("failed", error) to provide more meaningful errors such as
AssertionError: 'Failed' not found in '' instead of 0 != -1.

Change-Id: I670acdc977b788b2cedf94cfeafc12097781463f
Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
2019-03-11 08:09:23 +00:00
Ole Troan
9a475373ed test framework: vpp_papi_provider.py - further cleanup
Part of further cleanups of this file.
Removed most wrappers that don't have conflicting signature with
message API.

Change-Id: I6acd93d20291feb7731eb35ab2eb8c9f22f4632c
Signed-off-by: Ole Troan <ot@cisco.com>
2019-03-06 21:13:05 +01:00
Ole Troan
8006c6aa42 PAPI: Add MACAddress object wrapper for vl_api_mac_address_t
Change the definition of vl_api_mac_address_t to an aliased type.

Change-Id: I1434f316d0fad6a099592f39bceeb8faeaf1d134
Signed-off-by: Ole Troan <ot@cisco.com>
2018-12-18 11:54:24 +00:00
Ole Troan
7f99183a20 Test framework: StringIO fixes for Python3
Add 2/3 support to binarytomac and mactobinary and move to vpp_mac.py

Change-Id: I3dc7e4a24486aee22140c781aae7e44e58935877
Signed-off-by: Ole Troan <ot@cisco.com>
2018-12-10 08:01:56 +00:00
Steven
0d88301a57 bond: performance harvesting
- hash is great. But it is a bit too slow for the DP. Use direct array indexing
to quickly retrieve the slave interface.
- the algorithm used by flow hash is great. But it is a bit too slow for the DP.
Use l2_hash_hash() extracted from lb_hash.h which ECMP is using. It makes use
of intrinsic crc32 instruction set.
- shortcut modulo arithmetic when the operand is 2**x (where x up to 4) to
avoid division instruction.
- special case for link count == 1 in bond_tx_fn()
- use clib_mem_unaligned to access data for the packet to avoid alignment error
- Fix some typos for packet tracing.

Change-Id: I8eae3ad497061c5473aa675ba894ee0211120d25
Signed-off-by: Steven <sluong@cisco.com>
2018-05-25 11:46:05 +00:00
Steven
9cd2d7a5a4 bond: Add bonding driver and LACP protocol
Add bonding driver to support creation of bond interface which composes of
multiple slave interfaces. The slave interfaces could be physical interfaces,
or just any virtual interfaces. For example, memif interfaces.

The syntax to create a bond interface is
create bond mode <lacp | xor | acitve-backup | broadcast | round-robin>

To enslave an interface to the bond interface,
enslave interface TenGigabitEthernet6/0/0 to BondEthernet0

Please see src/plugins/lacp/lacp_doc.md for more examples and additional
options.

LACP is a control plane protocol which manages and monitors the status of
the slave interfaces. The protocol is part of 802.3ad standard. This patch
implements LACPv1. LACPv2 is not supported.
To enable LACP on the bond interface, specify "mode lacp" when the bond
interface is created. The syntax to enslave a slave interface is the same as
other bonding modes.

Change-Id: I06581d3b87635972f9f0e1ec50b67560fc13e26c
Signed-off-by: Steven <sluong@cisco.com>
2018-03-21 21:02:15 +00:00