Introducate a new API command:
ip6 nd proxy <host-address> <interface>
this indicates 2 things;
1) that host <host-address> is reachable out of interface <interface>. VPP will thus install that route.
2) NS requests sent to <host-address> will be responeded to (i.e. proxied).
Change-Id: I863f967fdb5097ab3b574769c70afdbfc8d5478a
Signed-off-by: Neale Ranns <nranns@cisco.com>
Inside user is statically mapped to a set of outside ports. Support endpoint
dependent mapping to deal with overloading of the outside ports.
Change-Id: I8014438744597a976f8ae459283e8b91f63b7f72
Signed-off-by: Matus Fabian <matfabia@cisco.com>
This change improves vpp_papi behaviour by introducing alternate way of
calling vpp APIs.
The common code is the same:
vpp = VPP(...)
vpp.connect(...)
Calling VPP API is different, instead of deprecated:
vpp.show_version() # deprecated
one should write
vpp.api.show_version()
this allows VPP messages like "connect" and "disconnect" to be used,
once the old API is dropped (in 17.07). Also part of this patch is a
check for name conflict, to prevent VPP object overwriting its own
functionality with generated code based on json files.
Change-Id: I22e573b6a45f8b2a1f0340c5c2597c194fe42ca4
Signed-off-by: Klement Sekera <ksekera@cisco.com>
Implement command line interface to the BFD binary APIs. Add
corresponding unit tests.
Change-Id: Ia0542d0bc4c8d78e6f7b777a08fd94ebfe4d524f
Signed-off-by: Klement Sekera <ksekera@cisco.com>
DHCP additions:
1) DHCPv4 will only relay a message back to the client, if the Option82 information is present. So make this the default.
2) It is no longer possible to select via the API to "insert circuit ID" - since this is now default
3) Remove the version 2 API since it's now the same as version 1.
4) Adding the VSS option is now conditional only on the presence of VSS config (not the 'insert' option in the set API)
5) DHCP proxy dump via API
Change-Id: Ia7271ba8c1d4dbf34a02c401d268ccfbb1b74f17
Signed-off-by: Neale Ranns <nranns@cisco.com>
- add/delete IPv6 VRF instances and verify results by parsing output
of ip6_fib_dump API command and by traffic
- small changes in assert_nothing_captured and get_capture to get logged
unexpected packets
Change-Id: I32207447be2df942e335aa9890ff52fb88e46597
Signed-off-by: Jan Gelety <jgelety@cisco.com>
Disable automatic garbage collection and run it manually before
running each test case to minimize stalls. Improve vpp subprocess
cleanup. Reduce helper thread count to one and properly clean that
thread once it's not needed.
Change-Id: I3ea78ed9628552b5ef3ff29cc7bcf2d3fc42f2c3
Signed-off-by: Klement Sekera <ksekera@cisco.com>
Ports are allocated per protocol (UDP, TCP, ICMP)
1:1 NAT with port is configured for specific protocol
Change-Id: I37ae5eed3715b223d0620d4fdaed7a482bb7a834
Signed-off-by: Matus Fabian <matfabia@cisco.com>
Add authentication support to BFD feature. Out of three existing
authentication types, implement SHA1 (sole RFC requirement). Simple
password is insecure and MD5 is discouraged by the RFC, so ignore
those.
Add/change APIs to allow configuring BFD authentication keys
and their usage with BFD sessions.
Change-Id: Ifb0fb5b19c2e72196d84c1cde919bd4c074ea415
Signed-off-by: Klement Sekera <ksekera@cisco.com>
- IPv[46] mfib tables with support for (*,G/m), (*,G) and (S,G) exact and longest prefix match
- Replication represented via a new replicate DPO.
- RPF configuration and data-plane checking
- data-plane signals sent to listening control planes.
The functions of multicast forwarding entries differ from their unicast conterparts, so we introduce a new mfib_table_t and mfib_entry_t objects. However, we re-use the fib_path_list to resolve and build the entry's output list. the fib_path_list provides the service to construct a replicate DPO for multicast.
'make tests' is added to with two new suites; TEST=mfib, this is invocation of the CLI command 'test mfib' which deals with many path add/remove, flag set/unset scenarios, TEST=ip-mcast, data-plane forwarding tests.
Updated applications to use the new MIFB functions;
- IPv6 NS/RA.
- DHCPv6
unit tests for these are undated accordingly.
Change-Id: I49ec37b01f1b170335a5697541c8fd30e6d3a961
Signed-off-by: Neale Ranns <nranns@cisco.com>
Allow writing simple code to expect API failure when needed:
with self.vapi.expect_negative_api_retval():
do_api_call() # expected to return negative retval in response
Change-Id: Id58d91d9ce38d20ad6ff7a43a6897e79ffbd23bf
Signed-off-by: Klement Sekera <ksekera@cisco.com>
- add/delete IPv4 VRF instances and verify results by parsing output
of ip_fib_dump API command and by traffic
Change-Id: I61ed5013adca29afd00b942f65be7bf964f38d85
Signed-off-by: Jan Gelety <jgelety@cisco.com>
includes Fix for VPP-584 with API change to remove prefix length from LL programming
Change-Id: If860751c35e60255fb977f73bc33e8c2649e728e
Signed-off-by: Neale Ranns <nranns@cisco.com>
Properly wakeup the main process loop only when necessary to avoid
missed events. Improve BFD unit test reliability and speed. Add
timestamps to logs and replace Queue with more efficient deque.
Change-Id: I01255a02057d3146917b43b669ccdc74f31ef0c8
Signed-off-by: Klement Sekera <ksekera@cisco.com>
This is a work-in-progress basic BFD session handling. Only
asynchronous mode is supported at the moment. Setting the session flags
doesn't work.
Change-Id: Idba27f721b5c35be5a66a6d202a63d23ff7ecf6f
Signed-off-by: Klement Sekera <ksekera@cisco.com>
- s/l2/span in span_api.c in foreach macro
- Not installing .json from Makefile.am
Change-Id: I2469fe01138d62e044b8262cdb5a6e3b009bb43e
Signed-off-by: Ole Troan <ot@cisco.com>
Change the test wrapper script for the updated Python API.
All tests but the L2BD multi instance runs fine.
That is currently skipped.
I see intermittent failures when an MLD message is received
before the ND NA in MPLS and IPV6 FIB tests.
Change-Id: If809877c9abdf596dbb0a419ce5429552f63d212
Signed-off-by: Ole Troan <ot@cisco.com>
- add/update/delete L2BD instances and verify results by API
command bridge_domain_dump and by traffic where applicable
Change-Id: Ic9d7f7b5f6f10e5df7053f27cbc87f653704dab1
Signed-off-by: Jan <jgelety@cisco.com>
- deprecate MPLSoEth and MPLSoGRE; replace with generic MPLS tunnel.
- deprecates CLI 'mpls encap ..'; replace with addition of MPLS out label to a route/tunnel.
- support for MPLS 'routes', e.g. MPLS x-connects.
- deprecates CLI 'mpls decap ..'; replace with 'mpls route .. '
Change-Id: Ibda46544912f880d0200f22bf9ff9b52828fcc2f
Signed-off-by: Neale Ranns <nranns@cisco.com>
Added support for multicast vxlan tunnels which are used for bridge domain flooding instead
of flooding the all unicast tunnels in the bridge domain.
features added:
* conditional flooding to some of the BD members - based on existance of multicast tunnel member
* added local multicast adjacency - multicast packets are handled as the same as unicast - based on src (unicast) address
* refactored some of vxlan tunnel creation code - to unify ip4/6 handling
Change-Id: I60cca4124265a8dd4f6b2d6ea8701e52e7c1baa4
Signed-off-by: Eyal Bari <ebari@cisco.com>
