vpp/test/test_vxlan.py
Vladimir Isaev 698eb87a8e vxlan: Fixed checksum caclculation offset
VXLAN uses csum_offload for IPv6 packets.

But without gso node we have csum calculated only for inner
packet.
This patch adds support for outer header csum calculation.
Checksum for inner packet should be calculated before
interface-output node (for example in vxlan node).

Type: fix

Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
Signed-off-by: Vladimir Isaev <visaev@netgate.com>
Change-Id: Ica68429ede4426293769207cd83c791ebe72fe56
2020-06-08 14:17:59 +00:00

287 lines
10 KiB
Python

#!/usr/bin/env python3
import socket
from util import ip4_range, reassemble4
import unittest
from framework import VppTestCase, VppTestRunner
from template_bd import BridgeDomain
from scapy.layers.l2 import Ether
from scapy.packet import Raw
from scapy.layers.inet import IP, UDP
from scapy.layers.vxlan import VXLAN
import util
from vpp_ip_route import VppIpRoute, VppRoutePath
from vpp_vxlan_tunnel import VppVxlanTunnel
from vpp_ip import INVALID_INDEX
class TestVxlan(BridgeDomain, VppTestCase):
""" VXLAN Test Case """
def __init__(self, *args):
BridgeDomain.__init__(self)
VppTestCase.__init__(self, *args)
def encapsulate(self, pkt, vni):
"""
Encapsulate the original payload frame by adding VXLAN header with its
UDP, IP and Ethernet fields
"""
return (Ether(src=self.pg0.remote_mac, dst=self.pg0.local_mac) /
IP(src=self.pg0.remote_ip4, dst=self.pg0.local_ip4) /
UDP(sport=self.dport, dport=self.dport, chksum=0) /
VXLAN(vni=vni, flags=self.flags) /
pkt)
def ip_range(self, start, end):
""" range of remote ip's """
return ip4_range(self.pg0.remote_ip4, start, end)
def encap_mcast(self, pkt, src_ip, src_mac, vni):
"""
Encapsulate the original payload frame by adding VXLAN header with its
UDP, IP and Ethernet fields
"""
return (Ether(src=src_mac, dst=self.mcast_mac) /
IP(src=src_ip, dst=self.mcast_ip4) /
UDP(sport=self.dport, dport=self.dport, chksum=0) /
VXLAN(vni=vni, flags=self.flags) /
pkt)
def decapsulate(self, pkt):
"""
Decapsulate the original payload frame by removing VXLAN header
"""
# check if is set I flag
self.assertEqual(pkt[VXLAN].flags, int('0x8', 16))
return pkt[VXLAN].payload
# Method for checking VXLAN encapsulation.
#
def check_encapsulation(self, pkt, vni, local_only=False, mcast_pkt=False):
# TODO: add error messages
# Verify source MAC is VPP_MAC and destination MAC is MY_MAC resolved
# by VPP using ARP.
self.assertEqual(pkt[Ether].src, self.pg0.local_mac)
if not local_only:
if not mcast_pkt:
self.assertEqual(pkt[Ether].dst, self.pg0.remote_mac)
else:
self.assertEqual(pkt[Ether].dst, type(self).mcast_mac)
# Verify VXLAN tunnel source IP is VPP_IP and destination IP is MY_IP.
self.assertEqual(pkt[IP].src, self.pg0.local_ip4)
if not local_only:
if not mcast_pkt:
self.assertEqual(pkt[IP].dst, self.pg0.remote_ip4)
else:
self.assertEqual(pkt[IP].dst, type(self).mcast_ip4)
# Verify UDP destination port is VXLAN 4789, source UDP port could be
# arbitrary.
self.assertEqual(pkt[UDP].dport, type(self).dport)
# Verify UDP checksum
self.assert_udp_checksum_valid(pkt)
# Verify VNI
self.assertEqual(pkt[VXLAN].vni, vni)
@classmethod
def create_vxlan_flood_test_bd(cls, vni, n_ucast_tunnels):
# Create 10 ucast vxlan tunnels under bd
ip_range_start = 10
ip_range_end = ip_range_start + n_ucast_tunnels
next_hop_address = cls.pg0.remote_ip4
for dest_ip4 in ip4_range(next_hop_address, ip_range_start,
ip_range_end):
# add host route so dest_ip4 will not be resolved
rip = VppIpRoute(cls, dest_ip4, 32,
[VppRoutePath(next_hop_address,
INVALID_INDEX)],
register=False)
rip.add_vpp_config()
r = VppVxlanTunnel(cls, src=cls.pg0.local_ip4,
dst=dest_ip4, vni=vni)
r.add_vpp_config()
cls.vapi.sw_interface_set_l2_bridge(r.sw_if_index, bd_id=vni)
@classmethod
def add_del_shared_mcast_dst_load(cls, is_add):
"""
add or del tunnels sharing the same mcast dst
to test vxlan ref_count mechanism
"""
n_shared_dst_tunnels = 20
vni_start = 10000
vni_end = vni_start + n_shared_dst_tunnels
for vni in range(vni_start, vni_end):
r = VppVxlanTunnel(cls, src=cls.pg0.local_ip4,
dst=cls.mcast_ip4, mcast_sw_if_index=1, vni=vni)
if is_add:
r.add_vpp_config()
if r.sw_if_index == 0xffffffff:
raise ValueError("bad sw_if_index: ~0")
else:
r.remove_vpp_config()
@classmethod
def add_shared_mcast_dst_load(cls):
cls.add_del_shared_mcast_dst_load(is_add=1)
@classmethod
def del_shared_mcast_dst_load(cls):
cls.add_del_shared_mcast_dst_load(is_add=0)
@classmethod
def add_del_mcast_tunnels_load(cls, is_add):
"""
add or del tunnels to test vxlan stability
"""
n_distinct_dst_tunnels = 200
ip_range_start = 10
ip_range_end = ip_range_start + n_distinct_dst_tunnels
for dest_ip4 in ip4_range(cls.mcast_ip4, ip_range_start,
ip_range_end):
vni = bytearray(socket.inet_pton(socket.AF_INET, dest_ip4))[3]
r = VppVxlanTunnel(cls, src=cls.pg0.local_ip4,
dst=dest_ip4, mcast_sw_if_index=1, vni=vni)
if is_add:
r.add_vpp_config()
else:
r.remove_vpp_config()
@classmethod
def add_mcast_tunnels_load(cls):
cls.add_del_mcast_tunnels_load(is_add=1)
@classmethod
def del_mcast_tunnels_load(cls):
cls.add_del_mcast_tunnels_load(is_add=0)
# Class method to start the VXLAN test case.
# Overrides setUpClass method in VppTestCase class.
# Python try..except statement is used to ensure that the tear down of
# the class will be executed even if exception is raised.
# @param cls The class pointer.
@classmethod
def setUpClass(cls):
super(TestVxlan, cls).setUpClass()
try:
cls.dport = 4789
cls.flags = 0x8
# Create 2 pg interfaces.
cls.create_pg_interfaces(range(4))
for pg in cls.pg_interfaces:
pg.admin_up()
# Configure IPv4 addresses on VPP pg0.
cls.pg0.config_ip4()
# Resolve MAC address for VPP's IP address on pg0.
cls.pg0.resolve_arp()
# Our Multicast address
cls.mcast_ip4 = '239.1.1.1'
cls.mcast_mac = util.mcast_ip_to_mac(cls.mcast_ip4)
except Exception:
cls.tearDownClass()
raise
@classmethod
def tearDownClass(cls):
super(TestVxlan, cls).tearDownClass()
def setUp(self):
super(TestVxlan, self).setUp()
# Create VXLAN VTEP on VPP pg0, and put vxlan_tunnel0 and pg1
# into BD.
self.single_tunnel_vni = 0x12345
self.single_tunnel_bd = 1
r = VppVxlanTunnel(self, src=self.pg0.local_ip4,
dst=self.pg0.remote_ip4,
vni=self.single_tunnel_vni)
r.add_vpp_config()
self.vapi.sw_interface_set_l2_bridge(rx_sw_if_index=r.sw_if_index,
bd_id=self.single_tunnel_bd)
self.vapi.sw_interface_set_l2_bridge(
rx_sw_if_index=self.pg1.sw_if_index, bd_id=self.single_tunnel_bd)
# Setup vni 2 to test multicast flooding
self.n_ucast_tunnels = 10
self.mcast_flood_bd = 2
self.create_vxlan_flood_test_bd(self.mcast_flood_bd,
self.n_ucast_tunnels)
r = VppVxlanTunnel(self, src=self.pg0.local_ip4, dst=self.mcast_ip4,
mcast_sw_if_index=1, vni=self.mcast_flood_bd)
r.add_vpp_config()
self.vapi.sw_interface_set_l2_bridge(rx_sw_if_index=r.sw_if_index,
bd_id=self.mcast_flood_bd)
self.vapi.sw_interface_set_l2_bridge(
rx_sw_if_index=self.pg2.sw_if_index, bd_id=self.mcast_flood_bd)
# Add and delete mcast tunnels to check stability
self.add_shared_mcast_dst_load()
self.add_mcast_tunnels_load()
self.del_shared_mcast_dst_load()
self.del_mcast_tunnels_load()
# Setup vni 3 to test unicast flooding
self.ucast_flood_bd = 3
self.create_vxlan_flood_test_bd(self.ucast_flood_bd,
self.n_ucast_tunnels)
self.vapi.sw_interface_set_l2_bridge(
rx_sw_if_index=self.pg3.sw_if_index, bd_id=self.ucast_flood_bd)
def test_decap(self):
""" Decapsulation test
from BridgeDoman
"""
super(TestVxlan, self).test_decap()
def test_encap_big_packet(self):
""" Encapsulation test send big frame from pg1
Verify receipt of encapsulated frames on pg0
"""
self.vapi.sw_interface_set_mtu(self.pg0.sw_if_index, [1500, 0, 0, 0])
frame = (Ether(src='00:00:00:00:00:02', dst='00:00:00:00:00:01') /
IP(src='4.3.2.1', dst='1.2.3.4') /
UDP(sport=20000, dport=10000) /
Raw(b'\xa5' * 1450))
self.pg1.add_stream([frame])
self.pg0.enable_capture()
self.pg_start()
# Pick first received frame and check if it's correctly encapsulated.
out = self.pg0.get_capture(2)
ether = out[0]
pkt = reassemble4(out)
pkt = ether / pkt
self.check_encapsulation(pkt, self.single_tunnel_vni)
payload = self.decapsulate(pkt)
# TODO: Scapy bug?
# self.assert_eq_pkts(payload, frame)
# Method to define VPP actions before tear down of the test case.
# Overrides tearDown method in VppTestCase class.
# @param self The object pointer.
def tearDown(self):
super(TestVxlan, self).tearDown()
def show_commands_at_teardown(self):
self.logger.info(self.vapi.cli("show bridge-domain 1 detail"))
self.logger.info(self.vapi.cli("show bridge-domain 2 detail"))
self.logger.info(self.vapi.cli("show bridge-domain 3 detail"))
self.logger.info(self.vapi.cli("show vxlan tunnel"))
if __name__ == '__main__':
unittest.main(testRunner=VppTestRunner)