ligang/vpp
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity
vpp/test/test_mpls.py
Andrew Yourtchenko 8dc0d488e6 tests: tag the tests that do not work with multi-worker configuration 
If the multi-worker default VPP configuration is triggered by
setting VPP_WORKER_CONFIG="workers 2", some of the tests fail
for various reasons.

It's a substantial number, so this change marks all of the
testsets that have this issue, such that they can be addressed
later independently.

Type: test
Change-Id: I4f77196499edef3300afe7eabef9cbff91f794d3
Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
2021-02-11 09:54:02 +00:00

2372 lines
86 KiB
Python
Raw Permalink Blame History

#!/usr/bin/env python3
import unittest
import socket
from framework import tag_fixme_vpp_workers
from framework import VppTestCase, VppTestRunner
from vpp_ip import DpoProto, INVALID_INDEX
from vpp_ip_route import VppIpRoute, VppRoutePath, VppMplsRoute, \
VppMplsIpBind, VppIpMRoute, VppMRoutePath, \
VppIpTable, VppMplsTable, \
VppMplsLabel, MplsLspMode, find_mpls_route, \
FibPathProto, FibPathType, FibPathFlags, VppMplsLabel, MplsLspMode
from vpp_mpls_tunnel_interface import VppMPLSTunnelInterface
from vpp_papi import VppEnum
import scapy.compat
from scapy.packet import Raw
from scapy.layers.l2 import Ether, ARP
from scapy.layers.inet import IP, UDP, ICMP
from scapy.layers.inet6 import IPv6, ICMPv6TimeExceeded
from scapy.contrib.mpls import MPLS
NUM_PKTS = 67
# scapy removed these attributes.
# we asked that they be restored: https://github.com/secdev/scapy/pull/1878
# semantic names have more meaning than numbers. so here they are.
ARP.who_has = 1
ARP.is_at = 2
def verify_filter(capture, sent):
if not len(capture) == len(sent):
# filter out any IPv6 RAs from the capture
for p in capture:
if p.haslayer(IPv6):
capture.remove(p)
return capture
def verify_mpls_stack(tst, rx, mpls_labels):
# the rx'd packet has the MPLS label popped
eth = rx[Ether]
tst.assertEqual(eth.type, 0x8847)
rx_mpls = rx[MPLS]
for ii in range(len(mpls_labels)):
tst.assertEqual(rx_mpls.label, mpls_labels[ii].value)
tst.assertEqual(rx_mpls.cos, mpls_labels[ii].exp)
tst.assertEqual(rx_mpls.ttl, mpls_labels[ii].ttl)
if ii == len(mpls_labels) - 1:
tst.assertEqual(rx_mpls.s, 1)
else:
# not end of stack
tst.assertEqual(rx_mpls.s, 0)
# pop the label to expose the next
rx_mpls = rx_mpls[MPLS].payload
@tag_fixme_vpp_workers
class TestMPLS(VppTestCase):
""" MPLS Test Case """
@classmethod
def setUpClass(cls):
super(TestMPLS, cls).setUpClass()
@classmethod
def tearDownClass(cls):
super(TestMPLS, cls).tearDownClass()
def setUp(self):
super(TestMPLS, self).setUp()
# create 2 pg interfaces
self.create_pg_interfaces(range(4))
# setup both interfaces
# assign them different tables.
table_id = 0
self.tables = []
tbl = VppMplsTable(self, 0)
tbl.add_vpp_config()
self.tables.append(tbl)
for i in self.pg_interfaces:
i.admin_up()
if table_id != 0:
tbl = VppIpTable(self, table_id)
tbl.add_vpp_config()
self.tables.append(tbl)
tbl = VppIpTable(self, table_id, is_ip6=1)
tbl.add_vpp_config()
self.tables.append(tbl)
i.set_table_ip4(table_id)
i.set_table_ip6(table_id)
i.config_ip4()
i.resolve_arp()
i.config_ip6()
i.resolve_ndp()
i.enable_mpls()
table_id += 1
def tearDown(self):
for i in self.pg_interfaces:
i.unconfig_ip4()
i.unconfig_ip6()
i.set_table_ip4(0)
i.set_table_ip6(0)
i.disable_mpls()
i.admin_down()
super(TestMPLS, self).tearDown()
# the default of 64 matches the IP packet TTL default
def create_stream_labelled_ip4(
self,
src_if,
mpls_labels,
ping=0,
ip_itf=None,
dst_ip=None,
chksum=None,
ip_ttl=64,
n=257):
self.reset_packet_infos()
pkts = []
for i in range(0, n):
info = self.create_packet_info(src_if, src_if)
payload = self.info_to_payload(info)
p = Ether(dst=src_if.local_mac, src=src_if.remote_mac)
for ii in range(len(mpls_labels)):
p = p / MPLS(label=mpls_labels[ii].value,
ttl=mpls_labels[ii].ttl,
cos=mpls_labels[ii].exp)
if not ping:
if not dst_ip:
p = (p / IP(src=src_if.local_ip4,
dst=src_if.remote_ip4,
ttl=ip_ttl) /
UDP(sport=1234, dport=1234) /
Raw(payload))
else:
p = (p / IP(src=src_if.local_ip4, dst=dst_ip, ttl=ip_ttl) /
UDP(sport=1234, dport=1234) /
Raw(payload))
else:
p = (p / IP(src=ip_itf.remote_ip4,
dst=ip_itf.local_ip4,
ttl=ip_ttl) /
ICMP())
if chksum:
p[IP].chksum = chksum
info.data = p.copy()
pkts.append(p)
return pkts
def create_stream_ip4(self, src_if, dst_ip, ip_ttl=64,
ip_dscp=0, payload_size=None):
self.reset_packet_infos()
pkts = []
for i in range(0, 257):
info = self.create_packet_info(src_if, src_if)
payload = self.info_to_payload(info)
p = (Ether(dst=src_if.local_mac, src=src_if.remote_mac) /
IP(src=src_if.remote_ip4, dst=dst_ip,
ttl=ip_ttl, tos=ip_dscp) /
UDP(sport=1234, dport=1234) /
Raw(payload))
info.data = p.copy()
if payload_size:
self.extend_packet(p, payload_size)
pkts.append(p)
return pkts
def create_stream_ip6(self, src_if, dst_ip, ip_ttl=64, ip_dscp=0):
self.reset_packet_infos()
pkts = []
for i in range(0, 257):
info = self.create_packet_info(src_if, src_if)
payload = self.info_to_payload(info)
p = (Ether(dst=src_if.local_mac, src=src_if.remote_mac) /
IPv6(src=src_if.remote_ip6, dst=dst_ip,
hlim=ip_ttl, tc=ip_dscp) /
UDP(sport=1234, dport=1234) /
Raw(payload))
info.data = p.copy()
pkts.append(p)
return pkts
def create_stream_labelled_ip6(self, src_if, mpls_labels,
hlim=64, dst_ip=None):
if dst_ip is None:
dst_ip = src_if.remote_ip6
self.reset_packet_infos()
pkts = []
for i in range(0, 257):
info = self.create_packet_info(src_if, src_if)
payload = self.info_to_payload(info)
p = Ether(dst=src_if.local_mac, src=src_if.remote_mac)
for l in mpls_labels:
p = p / MPLS(label=l.value, ttl=l.ttl, cos=l.exp)
p = p / (IPv6(src=src_if.remote_ip6, dst=dst_ip, hlim=hlim) /
UDP(sport=1234, dport=1234) /
Raw(payload))
info.data = p.copy()
pkts.append(p)
return pkts
def verify_capture_ip4(self, src_if, capture, sent, ping_resp=0,
ip_ttl=None, ip_dscp=0):
try:
capture = verify_filter(capture, sent)
self.assertEqual(len(capture), len(sent))
for i in range(len(capture)):
tx = sent[i]
rx = capture[i]
# the rx'd packet has the MPLS label popped
eth = rx[Ether]
self.assertEqual(eth.type, 0x800)
tx_ip = tx[IP]
rx_ip = rx[IP]
if not ping_resp:
self.assertEqual(rx_ip.src, tx_ip.src)
self.assertEqual(rx_ip.dst, tx_ip.dst)
self.assertEqual(rx_ip.tos, ip_dscp)
if not ip_ttl:
# IP processing post pop has decremented the TTL
self.assertEqual(rx_ip.ttl + 1, tx_ip.ttl)
else:
self.assertEqual(rx_ip.ttl, ip_ttl)
else:
self.assertEqual(rx_ip.src, tx_ip.dst)
self.assertEqual(rx_ip.dst, tx_ip.src)
except:
raise
def verify_capture_labelled_ip4(self, src_if, capture, sent,
mpls_labels, ip_ttl=None):
try:
capture = verify_filter(capture, sent)
self.assertEqual(len(capture), len(sent))
for i in range(len(capture)):
tx = sent[i]
rx = capture[i]
tx_ip = tx[IP]
rx_ip = rx[IP]
verify_mpls_stack(self, rx, mpls_labels)
self.assertEqual(rx_ip.src, tx_ip.src)
self.assertEqual(rx_ip.dst, tx_ip.dst)
if not ip_ttl:
# IP processing post pop has decremented the TTL
self.assertEqual(rx_ip.ttl + 1, tx_ip.ttl)
else:
self.assertEqual(rx_ip.ttl, ip_ttl)
except:
raise
def verify_capture_labelled_ip6(self, src_if, capture, sent,
mpls_labels, ip_ttl=None):
try:
capture = verify_filter(capture, sent)
self.assertEqual(len(capture), len(sent))
for i in range(len(capture)):
tx = sent[i]
rx = capture[i]
tx_ip = tx[IPv6]
rx_ip = rx[IPv6]
verify_mpls_stack(self, rx, mpls_labels)
self.assertEqual(rx_ip.src, tx_ip.src)
self.assertEqual(rx_ip.dst, tx_ip.dst)
if not ip_ttl:
# IP processing post pop has decremented the TTL
self.assertEqual(rx_ip.hlim + 1, tx_ip.hlim)
else:
self.assertEqual(rx_ip.hlim, ip_ttl)
except:
raise
def verify_capture_tunneled_ip4(self, src_if, capture, sent, mpls_labels):
try:
capture = verify_filter(capture, sent)
self.assertEqual(len(capture), len(sent))
for i in range(len(capture)):
tx = sent[i]
rx = capture[i]
tx_ip = tx[IP]
rx_ip = rx[IP]
verify_mpls_stack(self, rx, mpls_labels)
self.assertEqual(rx_ip.src, tx_ip.src)
self.assertEqual(rx_ip.dst, tx_ip.dst)
# IP processing post pop has decremented the TTL
self.assertEqual(rx_ip.ttl + 1, tx_ip.ttl)
except:
raise
def verify_capture_labelled(self, src_if, capture, sent,
mpls_labels):
try:
capture = verify_filter(capture, sent)
self.assertEqual(len(capture), len(sent))
for i in range(len(capture)):
rx = capture[i]
verify_mpls_stack(self, rx, mpls_labels)
except:
raise
def verify_capture_ip6(self, src_if, capture, sent,
ip_hlim=None, ip_dscp=0):
try:
self.assertEqual(len(capture), len(sent))
for i in range(len(capture)):
tx = sent[i]
rx = capture[i]
# the rx'd packet has the MPLS label popped
eth = rx[Ether]
self.assertEqual(eth.type, 0x86DD)
tx_ip = tx[IPv6]
rx_ip = rx[IPv6]
self.assertEqual(rx_ip.src, tx_ip.src)
self.assertEqual(rx_ip.dst, tx_ip.dst)
self.assertEqual(rx_ip.tc, ip_dscp)
# IP processing post pop has decremented the TTL
if not ip_hlim:
self.assertEqual(rx_ip.hlim + 1, tx_ip.hlim)
else:
self.assertEqual(rx_ip.hlim, ip_hlim)
except:
raise
def verify_capture_ip6_icmp(self, src_if, capture, sent):
try:
self.assertEqual(len(capture), len(sent))
for i in range(len(capture)):
tx = sent[i]
rx = capture[i]
# the rx'd packet has the MPLS label popped
eth = rx[Ether]
self.assertEqual(eth.type, 0x86DD)
tx_ip = tx[IPv6]
rx_ip = rx[IPv6]
self.assertEqual(rx_ip.dst, tx_ip.src)
# ICMP sourced from the interface's address
self.assertEqual(rx_ip.src, src_if.local_ip6)
# hop-limit reset to 255 for IMCP packet
self.assertEqual(rx_ip.hlim, 255)
icmp = rx[ICMPv6TimeExceeded]
except:
raise
def verify_capture_fragmented_labelled_ip4(self, src_if, capture, sent,
mpls_labels, ip_ttl=None):
try:
capture = verify_filter(capture, sent)
for i in range(len(capture)):
tx = sent[0]
rx = capture[i]
tx_ip = tx[IP]
rx_ip = rx[IP]
verify_mpls_stack(self, rx, mpls_labels)
self.assertEqual(rx_ip.src, tx_ip.src)
self.assertEqual(rx_ip.dst, tx_ip.dst)
if not ip_ttl:
# IP processing post pop has decremented the TTL
self.assertEqual(rx_ip.ttl + 1, tx_ip.ttl)
else:
self.assertEqual(rx_ip.ttl, ip_ttl)
except:
raise
def test_swap(self):
""" MPLS label swap tests """
#
# A simple MPLS xconnect - eos label in label out
#
route_32_eos = VppMplsRoute(self, 32, 1,
[VppRoutePath(self.pg0.remote_ip4,
self.pg0.sw_if_index,
labels=[VppMplsLabel(33)])])
route_32_eos.add_vpp_config()
self.assertTrue(
find_mpls_route(self, 0, 32, 1,
[VppRoutePath(self.pg0.remote_ip4,
self.pg0.sw_if_index,
labels=[VppMplsLabel(33)])]))
#
# a stream that matches the route for 10.0.0.1
# PG0 is in the default table
#
tx = self.create_stream_labelled_ip4(self.pg0,
[VppMplsLabel(32, ttl=32, exp=1)])
rx = self.send_and_expect(self.pg0, tx, self.pg0)
self.verify_capture_labelled(self.pg0, rx, tx,
[VppMplsLabel(33, ttl=31, exp=1)])
self.assertEqual(route_32_eos.get_stats_to()['packets'], 257)
#
# A simple MPLS xconnect - non-eos label in label out
#
route_32_neos = VppMplsRoute(self, 32, 0,
[VppRoutePath(self.pg0.remote_ip4,
self.pg0.sw_if_index,
labels=[VppMplsLabel(33)])])
route_32_neos.add_vpp_config()
#
# a stream that matches the route for 10.0.0.1
# PG0 is in the default table
#
tx = self.create_stream_labelled_ip4(self.pg0,
[VppMplsLabel(32, ttl=21, exp=7),
VppMplsLabel(99)])
rx = self.send_and_expect(self.pg0, tx, self.pg0)
self.verify_capture_labelled(self.pg0, rx, tx,
[VppMplsLabel(33, ttl=20, exp=7),
VppMplsLabel(99)])
self.assertEqual(route_32_neos.get_stats_to()['packets'], 257)
#
# A simple MPLS xconnect - non-eos label in label out, uniform mode
#
route_42_neos = VppMplsRoute(
self, 42, 0,
[VppRoutePath(self.pg0.remote_ip4,
self.pg0.sw_if_index,
labels=[VppMplsLabel(43, MplsLspMode.UNIFORM)])])
route_42_neos.add_vpp_config()
tx = self.create_stream_labelled_ip4(self.pg0,
[VppMplsLabel(42, ttl=21, exp=7),
VppMplsLabel(99)])
rx = self.send_and_expect(self.pg0, tx, self.pg0)
self.verify_capture_labelled(self.pg0, rx, tx,
[VppMplsLabel(43, ttl=20, exp=7),
VppMplsLabel(99)])
#
# An MPLS xconnect - EOS label in IP out
#
route_33_eos = VppMplsRoute(self, 33, 1,
[VppRoutePath(self.pg0.remote_ip4,
self.pg0.sw_if_index,
labels=[])])
route_33_eos.add_vpp_config()
tx = self.create_stream_labelled_ip4(self.pg0, [VppMplsLabel(33)])
rx = self.send_and_expect(self.pg0, tx, self.pg0)
self.verify_capture_ip4(self.pg0, rx, tx)
#
# disposed packets have an invalid IPv4 checksum
#
tx = self.create_stream_labelled_ip4(self.pg0, [VppMplsLabel(33)],
dst_ip=self.pg0.remote_ip4,
n=65,
chksum=1)
self.send_and_assert_no_replies(self.pg0, tx, "Invalid Checksum")
#
# An MPLS xconnect - EOS label in IP out, uniform mode
#
route_3333_eos = VppMplsRoute(
self, 3333, 1,
[VppRoutePath(self.pg0.remote_ip4,
self.pg0.sw_if_index,
labels=[VppMplsLabel(3, MplsLspMode.UNIFORM)])])
route_3333_eos.add_vpp_config()
tx = self.create_stream_labelled_ip4(
self.pg0,
[VppMplsLabel(3333, ttl=55, exp=3)])
rx = self.send_and_expect(self.pg0, tx, self.pg0)
self.verify_capture_ip4(self.pg0, rx, tx, ip_ttl=54, ip_dscp=0x60)
tx = self.create_stream_labelled_ip4(
self.pg0,
[VppMplsLabel(3333, ttl=66, exp=4)])
rx = self.send_and_expect(self.pg0, tx, self.pg0)
self.verify_capture_ip4(self.pg0, rx, tx, ip_ttl=65, ip_dscp=0x80)
#
# An MPLS xconnect - EOS label in IPv6 out
#
route_333_eos = VppMplsRoute(
self, 333, 1,
[VppRoutePath(self.pg0.remote_ip6,
self.pg0.sw_if_index,
labels=[])],
eos_proto=FibPathProto.FIB_PATH_NH_PROTO_IP6)
route_333_eos.add_vpp_config()
tx = self.create_stream_labelled_ip6(self.pg0, [VppMplsLabel(333)])
rx = self.send_and_expect(self.pg0, tx, self.pg0)
self.verify_capture_ip6(self.pg0, rx, tx)
#
# disposed packets have an TTL expired
#
tx = self.create_stream_labelled_ip6(self.pg0,
[VppMplsLabel(333, ttl=64)],
dst_ip=self.pg1.remote_ip6,
hlim=1)
rx = self.send_and_expect(self.pg0, tx, self.pg0)
self.verify_capture_ip6_icmp(self.pg0, rx, tx)
#
# An MPLS xconnect - EOS label in IPv6 out w imp-null
#
route_334_eos = VppMplsRoute(
self, 334, 1,
[VppRoutePath(self.pg0.remote_ip6,
self.pg0.sw_if_index,
labels=[VppMplsLabel(3)])],
eos_proto=FibPathProto.FIB_PATH_NH_PROTO_IP6)
route_334_eos.add_vpp_config()
tx = self.create_stream_labelled_ip6(self.pg0,
[VppMplsLabel(334, ttl=64)])
rx = self.send_and_expect(self.pg0, tx, self.pg0)
self.verify_capture_ip6(self.pg0, rx, tx)
#
# An MPLS xconnect - EOS label in IPv6 out w imp-null in uniform mode
#
route_335_eos = VppMplsRoute(
self, 335, 1,
[VppRoutePath(self.pg0.remote_ip6,
self.pg0.sw_if_index,
labels=[VppMplsLabel(3, MplsLspMode.UNIFORM)])],
eos_proto=FibPathProto.FIB_PATH_NH_PROTO_IP6)
route_335_eos.add_vpp_config()
tx = self.create_stream_labelled_ip6(
self.pg0,
[VppMplsLabel(335, ttl=27, exp=4)])
rx = self.send_and_expect(self.pg0, tx, self.pg0)
self.verify_capture_ip6(self.pg0, rx, tx, ip_hlim=26, ip_dscp=0x80)
#
# disposed packets have an TTL expired
#
tx = self.create_stream_labelled_ip6(self.pg0, [VppMplsLabel(334)],
dst_ip=self.pg1.remote_ip6,
hlim=0)
rx = self.send_and_expect(self.pg0, tx, self.pg0)
self.verify_capture_ip6_icmp(self.pg0, rx, tx)
#
# An MPLS xconnect - non-EOS label in IP out - an invalid configuration
# so this traffic should be dropped.
#
route_33_neos = VppMplsRoute(self, 33, 0,
[VppRoutePath(self.pg0.remote_ip4,
self.pg0.sw_if_index,
labels=[])])
route_33_neos.add_vpp_config()
tx = self.create_stream_labelled_ip4(self.pg0,
[VppMplsLabel(33),
VppMplsLabel(99)])
self.send_and_assert_no_replies(
self.pg0, tx,
"MPLS non-EOS packets popped and forwarded")
#
# A recursive EOS x-connect, which resolves through another x-connect
# in pipe mode
#
route_34_eos = VppMplsRoute(self, 34, 1,
[VppRoutePath("0.0.0.0",
0xffffffff,
nh_via_label=32,
labels=[VppMplsLabel(44),
VppMplsLabel(45)])])
route_34_eos.add_vpp_config()
self.logger.info(self.vapi.cli("sh mpls fib 34"))
tx = self.create_stream_labelled_ip4(self.pg0,
[VppMplsLabel(34, ttl=3)])
rx = self.send_and_expect(self.pg0, tx, self.pg0)
self.verify_capture_labelled(self.pg0, rx, tx,
[VppMplsLabel(33),
VppMplsLabel(44),
VppMplsLabel(45, ttl=2)])
self.assertEqual(route_34_eos.get_stats_to()['packets'], 257)
self.assertEqual(route_32_neos.get_stats_via()['packets'], 257)
#
# A recursive EOS x-connect, which resolves through another x-connect
# in uniform mode
#
route_35_eos = VppMplsRoute(
self, 35, 1,
[VppRoutePath("0.0.0.0",
0xffffffff,
nh_via_label=42,
labels=[VppMplsLabel(44)])])
route_35_eos.add_vpp_config()
tx = self.create_stream_labelled_ip4(self.pg0,
[VppMplsLabel(35, ttl=3)])
rx = self.send_and_expect(self.pg0, tx, self.pg0)
self.verify_capture_labelled(self.pg0, rx, tx,
[VppMplsLabel(43, ttl=2),
VppMplsLabel(44, ttl=2)])
#
# A recursive non-EOS x-connect, which resolves through another
# x-connect
#
route_34_neos = VppMplsRoute(self, 34, 0,
[VppRoutePath("0.0.0.0",
0xffffffff,
nh_via_label=32,
labels=[VppMplsLabel(44),
VppMplsLabel(46)])])
route_34_neos.add_vpp_config()
tx = self.create_stream_labelled_ip4(self.pg0,
[VppMplsLabel(34, ttl=45),
VppMplsLabel(99)])
rx = self.send_and_expect(self.pg0, tx, self.pg0)
# it's the 2nd (counting from 0) label in the stack that is swapped
self.verify_capture_labelled(self.pg0, rx, tx,
[VppMplsLabel(33),
VppMplsLabel(44),
VppMplsLabel(46, ttl=44),
VppMplsLabel(99)])
#
# an recursive IP route that resolves through the recursive non-eos
# x-connect
#
ip_10_0_0_1 = VppIpRoute(self, "10.0.0.1", 32,
[VppRoutePath("0.0.0.0",
0xffffffff,
nh_via_label=34,
labels=[VppMplsLabel(55)])])
ip_10_0_0_1.add_vpp_config()
tx = self.create_stream_ip4(self.pg0, "10.0.0.1")
rx = self.send_and_expect(self.pg0, tx, self.pg0)
self.verify_capture_labelled_ip4(self.pg0, rx, tx,
[VppMplsLabel(33),
VppMplsLabel(44),
VppMplsLabel(46),
VppMplsLabel(55)])
self.assertEqual(ip_10_0_0_1.get_stats_to()['packets'], 257)
ip_10_0_0_1.remove_vpp_config()
route_34_neos.remove_vpp_config()
route_34_eos.remove_vpp_config()
route_33_neos.remove_vpp_config()
route_33_eos.remove_vpp_config()
route_32_neos.remove_vpp_config()
route_32_eos.remove_vpp_config()
def test_bind(self):
""" MPLS Local Label Binding test """
#
# Add a non-recursive route with a single out label
#
route_10_0_0_1 = VppIpRoute(self, "10.0.0.1", 32,
[VppRoutePath(self.pg0.remote_ip4,
self.pg0.sw_if_index,
labels=[VppMplsLabel(45)])])
route_10_0_0_1.add_vpp_config()
# bind a local label to the route
binding = VppMplsIpBind(self, 44, "10.0.0.1", 32)
binding.add_vpp_config()
# non-EOS stream
tx = self.create_stream_labelled_ip4(self.pg0,
[VppMplsLabel(44),
VppMplsLabel(99)])
rx = self.send_and_expect(self.pg0, tx, self.pg0)
self.verify_capture_labelled(self.pg0, rx, tx,
[VppMplsLabel(45, ttl=63),
VppMplsLabel(99)])
# EOS stream
tx = self.create_stream_labelled_ip4(self.pg0, [VppMplsLabel(44)])
rx = self.send_and_expect(self.pg0, tx, self.pg0)
self.verify_capture_labelled(self.pg0, rx, tx,
[VppMplsLabel(45, ttl=63)])
# IP stream
tx = self.create_stream_ip4(self.pg0, "10.0.0.1")
rx = self.send_and_expect(self.pg0, tx, self.pg0)
self.verify_capture_labelled_ip4(self.pg0, rx, tx, [VppMplsLabel(45)])
#
# cleanup
#
binding.remove_vpp_config()
route_10_0_0_1.remove_vpp_config()
def test_imposition(self):
""" MPLS label imposition test """
#
# Add a non-recursive route with a single out label
#
route_10_0_0_1 = VppIpRoute(self, "10.0.0.1", 32,
[VppRoutePath(self.pg0.remote_ip4,
self.pg0.sw_if_index,
labels=[VppMplsLabel(32)])])
route_10_0_0_1.add_vpp_config()
#
# a stream that matches the route for 10.0.0.1
# PG0 is in the default table
#
tx = self.create_stream_ip4(self.pg0, "10.0.0.1")
rx = self.send_and_expect(self.pg0, tx, self.pg0)
self.verify_capture_labelled_ip4(self.pg0, rx, tx, [VppMplsLabel(32)])
#
# Add a non-recursive route with a 3 out labels
#
route_10_0_0_2 = VppIpRoute(self, "10.0.0.2", 32,
[VppRoutePath(self.pg0.remote_ip4,
self.pg0.sw_if_index,
labels=[VppMplsLabel(32),
VppMplsLabel(33),
VppMplsLabel(34)])])
route_10_0_0_2.add_vpp_config()
tx = self.create_stream_ip4(self.pg0, "10.0.0.2",
ip_ttl=44, ip_dscp=0xff)
rx = self.send_and_expect(self.pg0, tx, self.pg0)
self.verify_capture_labelled_ip4(self.pg0, rx, tx,
[VppMplsLabel(32),
VppMplsLabel(33),
VppMplsLabel(34)],
ip_ttl=43)
#
# Add a non-recursive route with a single out label in uniform mode
#
route_10_0_0_3 = VppIpRoute(
self, "10.0.0.3", 32,
[VppRoutePath(self.pg0.remote_ip4,
self.pg0.sw_if_index,
labels=[VppMplsLabel(32,
mode=MplsLspMode.UNIFORM)])])
route_10_0_0_3.add_vpp_config()
tx = self.create_stream_ip4(self.pg0, "10.0.0.3",
ip_ttl=54, ip_dscp=0xbe)
rx = self.send_and_expect(self.pg0, tx, self.pg0)
self.verify_capture_labelled_ip4(self.pg0, rx, tx,
[VppMplsLabel(32, ttl=53, exp=5)])
#
# Add a IPv6 non-recursive route with a single out label in
# uniform mode
#
route_2001_3 = VppIpRoute(
self, "2001::3", 128,
[VppRoutePath(self.pg0.remote_ip6,
self.pg0.sw_if_index,
labels=[VppMplsLabel(32,
mode=MplsLspMode.UNIFORM)])])
route_2001_3.add_vpp_config()
tx = self.create_stream_ip6(self.pg0, "2001::3",
ip_ttl=54, ip_dscp=0xbe)
rx = self.send_and_expect(self.pg0, tx, self.pg0)
self.verify_capture_labelled_ip6(self.pg0, rx, tx,
[VppMplsLabel(32, ttl=53, exp=5)])
#
# add a recursive path, with output label, via the 1 label route
#
route_11_0_0_1 = VppIpRoute(self, "11.0.0.1", 32,
[VppRoutePath("10.0.0.1",
0xffffffff,
labels=[VppMplsLabel(44)])])
route_11_0_0_1.add_vpp_config()
#
# a stream that matches the route for 11.0.0.1, should pick up
# the label stack for 11.0.0.1 and 10.0.0.1
#
tx = self.create_stream_ip4(self.pg0, "11.0.0.1")
rx = self.send_and_expect(self.pg0, tx, self.pg0)
self.verify_capture_labelled_ip4(self.pg0, rx, tx,
[VppMplsLabel(32),
VppMplsLabel(44)])
self.assertEqual(route_11_0_0_1.get_stats_to()['packets'], 257)
#
# add a recursive path, with 2 labels, via the 3 label route
#
route_11_0_0_2 = VppIpRoute(self, "11.0.0.2", 32,
[VppRoutePath("10.0.0.2",
0xffffffff,
labels=[VppMplsLabel(44),
VppMplsLabel(45)])])
route_11_0_0_2.add_vpp_config()
#
# a stream that matches the route for 11.0.0.1, should pick up
# the label stack for 11.0.0.1 and 10.0.0.1
#
tx = self.create_stream_ip4(self.pg0, "11.0.0.2")
rx = self.send_and_expect(self.pg0, tx, self.pg0)
self.verify_capture_labelled_ip4(self.pg0, rx, tx,
[VppMplsLabel(32),
VppMplsLabel(33),
VppMplsLabel(34),
VppMplsLabel(44),
VppMplsLabel(45)])
self.assertEqual(route_11_0_0_2.get_stats_to()['packets'], 257)
rx = self.send_and_expect(self.pg0, tx, self.pg0)
self.verify_capture_labelled_ip4(self.pg0, rx, tx,
[VppMplsLabel(32),
VppMplsLabel(33),
VppMplsLabel(34),
VppMplsLabel(44),
VppMplsLabel(45)])
self.assertEqual(route_11_0_0_2.get_stats_to()['packets'], 514)
#
# cleanup
#
route_11_0_0_2.remove_vpp_config()
route_11_0_0_1.remove_vpp_config()
route_10_0_0_2.remove_vpp_config()
route_10_0_0_1.remove_vpp_config()
def test_imposition_fragmentation(self):
""" MPLS label imposition fragmentation test """
#
# Add a ipv4 non-recursive route with a single out label
#
route_10_0_0_1 = VppIpRoute(self, "10.0.0.1", 32,
[VppRoutePath(self.pg0.remote_ip4,
self.pg0.sw_if_index,
labels=[VppMplsLabel(32)])])
route_10_0_0_1.add_vpp_config()
#
# a stream that matches the route for 10.0.0.1
# PG0 is in the default table
#
tx = self.create_stream_ip4(self.pg0, "10.0.0.1")
for i in range(0, 257):
self.extend_packet(tx[i], 10000)
#
# 5 fragments per packet (257*5=1285)
#
rx = self.send_and_expect(self.pg0, tx, self.pg0, 1285)
self.verify_capture_fragmented_labelled_ip4(self.pg0, rx, tx,
[VppMplsLabel(32)])
#
# cleanup
#
route_10_0_0_1.remove_vpp_config()
def test_tunnel_pipe(self):
""" MPLS Tunnel Tests - Pipe """
#
# Create a tunnel with two out labels
#
mpls_tun = VppMPLSTunnelInterface(
self,
[VppRoutePath(self.pg0.remote_ip4,
self.pg0.sw_if_index,
labels=[VppMplsLabel(44),
VppMplsLabel(46)])])
mpls_tun.add_vpp_config()
mpls_tun.admin_up()
#
# add an unlabelled route through the new tunnel
#
route_10_0_0_3 = VppIpRoute(self, "10.0.0.3", 32,
[VppRoutePath("0.0.0.0",
mpls_tun._sw_if_index)])
route_10_0_0_3.add_vpp_config()
self.vapi.cli("clear trace")
tx = self.create_stream_ip4(self.pg0, "10.0.0.3")
self.pg0.add_stream(tx)
self.pg_enable_capture(self.pg_interfaces)
self.pg_start()
rx = self.pg0.get_capture()
self.verify_capture_tunneled_ip4(self.pg0, rx, tx,
[VppMplsLabel(44),
VppMplsLabel(46)])
#
# add a labelled route through the new tunnel
#
route_10_0_0_4 = VppIpRoute(self, "10.0.0.4", 32,
[VppRoutePath("0.0.0.0",
mpls_tun._sw_if_index,
labels=[33])])
route_10_0_0_4.add_vpp_config()
self.vapi.cli("clear trace")
tx = self.create_stream_ip4(self.pg0, "10.0.0.4")
self.pg0.add_stream(tx)
self.pg_enable_capture(self.pg_interfaces)
self.pg_start()
rx = self.pg0.get_capture()
self.verify_capture_tunneled_ip4(self.pg0, rx, tx,
[VppMplsLabel(44),
VppMplsLabel(46),
VppMplsLabel(33, ttl=255)])
#
# change tunnel's MTU to a low value
#
mpls_tun.set_l3_mtu(1200)
# send IP into the tunnel to be fragmented
tx = self.create_stream_ip4(self.pg0, "10.0.0.3",
payload_size=1500)
rx = self.send_and_expect(self.pg0, tx, self.pg0, len(tx)*2)
fake_tx = []
for p in tx:
fake_tx.append(p)
fake_tx.append(p)
self.verify_capture_tunneled_ip4(self.pg0, rx, fake_tx,
[VppMplsLabel(44),
VppMplsLabel(46)])
# send MPLS into the tunnel to be fragmented
tx = self.create_stream_ip4(self.pg0, "10.0.0.4",
payload_size=1500)
rx = self.send_and_expect(self.pg0, tx, self.pg0, len(tx)*2)
fake_tx = []
for p in tx:
fake_tx.append(p)
fake_tx.append(p)
self.verify_capture_tunneled_ip4(self.pg0, rx, fake_tx,
[VppMplsLabel(44),
VppMplsLabel(46),
VppMplsLabel(33, ttl=255)])
def test_tunnel_uniform(self):
""" MPLS Tunnel Tests - Uniform """
#
# Create a tunnel with a single out label
# The label stack is specified here from outer to inner
#
mpls_tun = VppMPLSTunnelInterface(
self,
[VppRoutePath(self.pg0.remote_ip4,
self.pg0.sw_if_index,
labels=[VppMplsLabel(44, ttl=32),
VppMplsLabel(46, MplsLspMode.UNIFORM)])])
mpls_tun.add_vpp_config()
mpls_tun.admin_up()
#
# add an unlabelled route through the new tunnel
#
route_10_0_0_3 = VppIpRoute(self, "10.0.0.3", 32,
[VppRoutePath("0.0.0.0",
mpls_tun._sw_if_index)])
route_10_0_0_3.add_vpp_config()
self.vapi.cli("clear trace")
tx = self.create_stream_ip4(self.pg0, "10.0.0.3", ip_ttl=24)
self.pg0.add_stream(tx)
self.pg_enable_capture(self.pg_interfaces)
self.pg_start()
rx = self.pg0.get_capture()
self.verify_capture_tunneled_ip4(self.pg0, rx, tx,
[VppMplsLabel(44, ttl=32),
VppMplsLabel(46, ttl=23)])
#
# add a labelled route through the new tunnel
#
route_10_0_0_4 = VppIpRoute(
self, "10.0.0.4", 32,
[VppRoutePath("0.0.0.0",
mpls_tun._sw_if_index,
labels=[VppMplsLabel(33, ttl=47)])])
route_10_0_0_4.add_vpp_config()
self.vapi.cli("clear trace")
tx = self.create_stream_ip4(self.pg0, "10.0.0.4")
self.pg0.add_stream(tx)
self.pg_enable_capture(self.pg_interfaces)
self.pg_start()
rx = self.pg0.get_capture()
self.verify_capture_tunneled_ip4(self.pg0, rx, tx,
[VppMplsLabel(44, ttl=32),
VppMplsLabel(46, ttl=47),
VppMplsLabel(33, ttl=47)])
def test_mpls_tunnel_many(self):
""" MPLS Multiple Tunnels """
for ii in range(10):
mpls_tun = VppMPLSTunnelInterface(
self,
[VppRoutePath(self.pg0.remote_ip4,
self.pg0.sw_if_index,
labels=[VppMplsLabel(44, ttl=32),
VppMplsLabel(46, MplsLspMode.UNIFORM)])])
mpls_tun.add_vpp_config()
mpls_tun.admin_up()
def test_v4_exp_null(self):
""" MPLS V4 Explicit NULL test """
#
# The first test case has an MPLS TTL of 0
# all packet should be dropped
#
tx = self.create_stream_labelled_ip4(self.pg0,
[VppMplsLabel(0, ttl=0)])
self.send_and_assert_no_replies(self.pg0, tx,
"MPLS TTL=0 packets forwarded")
#
# a stream with a non-zero MPLS TTL
# PG0 is in the default table
#
tx = self.create_stream_labelled_ip4(self.pg0, [VppMplsLabel(0)])
rx = self.send_and_expect(self.pg0, tx, self.pg0)
self.verify_capture_ip4(self.pg0, rx, tx)
#
# a stream with a non-zero MPLS TTL
# PG1 is in table 1
# we are ensuring the post-pop lookup occurs in the VRF table
#
tx = self.create_stream_labelled_ip4(self.pg1, [VppMplsLabel(0)])
rx = self.send_and_expect(self.pg1, tx, self.pg1)
self.verify_capture_ip4(self.pg1, rx, tx)
def test_v6_exp_null(self):
""" MPLS V6 Explicit NULL test """
#
# a stream with a non-zero MPLS TTL
# PG0 is in the default table
#
tx = self.create_stream_labelled_ip6(self.pg0, [VppMplsLabel(2)])
rx = self.send_and_expect(self.pg0, tx, self.pg0)
self.verify_capture_ip6(self.pg0, rx, tx)
#
# a stream with a non-zero MPLS TTL
# PG1 is in table 1
# we are ensuring the post-pop lookup occurs in the VRF table
#
tx = self.create_stream_labelled_ip6(self.pg1, [VppMplsLabel(2)])
rx = self.send_and_expect(self.pg1, tx, self.pg1)
self.verify_capture_ip6(self.pg0, rx, tx)
def test_deag(self):
""" MPLS Deagg """
#
# A de-agg route - next-hop lookup in default table
#
route_34_eos = VppMplsRoute(self, 34, 1,
[VppRoutePath("0.0.0.0",
0xffffffff,
nh_table_id=0)])
route_34_eos.add_vpp_config()
#
# ping an interface in the default table
# PG0 is in the default table
#
tx = self.create_stream_labelled_ip4(self.pg0,
[VppMplsLabel(34)],
ping=1,
ip_itf=self.pg0)
rx = self.send_and_expect(self.pg0, tx, self.pg0)
self.verify_capture_ip4(self.pg0, rx, tx, ping_resp=1)
#
# A de-agg route - next-hop lookup in non-default table
#
route_35_eos = VppMplsRoute(self, 35, 1,
[VppRoutePath("0.0.0.0",
0xffffffff,
nh_table_id=1)])
route_35_eos.add_vpp_config()
#
# ping an interface in the non-default table
# PG0 is in the default table. packet arrive labelled in the
# default table and egress unlabelled in the non-default
#
tx = self.create_stream_labelled_ip4(
self.pg0, [VppMplsLabel(35)], ping=1, ip_itf=self.pg1)
rx = self.send_and_expect(self.pg0, tx, self.pg1)
self.verify_capture_ip4(self.pg1, rx, tx, ping_resp=1)
#
# Double pop
#
route_36_neos = VppMplsRoute(self, 36, 0,
[VppRoutePath("0.0.0.0",
0xffffffff)])
route_36_neos.add_vpp_config()
tx = self.create_stream_labelled_ip4(self.pg0,
[VppMplsLabel(36),
VppMplsLabel(35)],
ping=1, ip_itf=self.pg1)
rx = self.send_and_expect(self.pg0, tx, self.pg1)
self.verify_capture_ip4(self.pg1, rx, tx, ping_resp=1)
route_36_neos.remove_vpp_config()
route_35_eos.remove_vpp_config()
route_34_eos.remove_vpp_config()
def test_interface_rx(self):
""" MPLS Interface Receive """
#
# Add a non-recursive route that will forward the traffic
# post-interface-rx
#
route_10_0_0_1 = VppIpRoute(self, "10.0.0.1", 32,
table_id=1,
paths=[VppRoutePath(self.pg1.remote_ip4,
self.pg1.sw_if_index)])
route_10_0_0_1.add_vpp_config()
#
# An interface receive label that maps traffic to RX on interface
# pg1
# by injecting the packet in on pg0, which is in table 0
# doing an interface-rx on pg1 and matching a route in table 1
# if the packet egresses, then we must have swapped to pg1
# so as to have matched the route in table 1
#
route_34_eos = VppMplsRoute(
self, 34, 1,
[VppRoutePath("0.0.0.0",
self.pg1.sw_if_index,
type=FibPathType.FIB_PATH_TYPE_INTERFACE_RX)])
route_34_eos.add_vpp_config()
#
# ping an interface in the default table
# PG0 is in the default table
#
tx = self.create_stream_labelled_ip4(self.pg0,
[VppMplsLabel(34)],
dst_ip="10.0.0.1")
rx = self.send_and_expect(self.pg0, tx, self.pg1)
self.verify_capture_ip4(self.pg1, rx, tx)
def test_mcast_mid_point(self):
""" MPLS Multicast Mid Point """
#
# Add a non-recursive route that will forward the traffic
# post-interface-rx
#
route_10_0_0_1 = VppIpRoute(self, "10.0.0.1", 32,
table_id=1,
paths=[VppRoutePath(self.pg1.remote_ip4,
self.pg1.sw_if_index)])
route_10_0_0_1.add_vpp_config()
#
# Add a mcast entry that replicate to pg2 and pg3
# and replicate to a interface-rx (like a bud node would)
#
route_3400_eos = VppMplsRoute(
self, 3400, 1,
[VppRoutePath(self.pg2.remote_ip4,
self.pg2.sw_if_index,
labels=[VppMplsLabel(3401)]),
VppRoutePath(self.pg3.remote_ip4,
self.pg3.sw_if_index,
labels=[VppMplsLabel(3402)]),
VppRoutePath("0.0.0.0",
self.pg1.sw_if_index,
type=FibPathType.FIB_PATH_TYPE_INTERFACE_RX)],
is_multicast=1)
route_3400_eos.add_vpp_config()
#
# ping an interface in the default table
# PG0 is in the default table
#
self.vapi.cli("clear trace")
tx = self.create_stream_labelled_ip4(self.pg0,
[VppMplsLabel(3400, ttl=64)],
n=257,
dst_ip="10.0.0.1")
self.pg0.add_stream(tx)
self.pg_enable_capture(self.pg_interfaces)
self.pg_start()
rx = self.pg1.get_capture(257)
self.verify_capture_ip4(self.pg1, rx, tx)
rx = self.pg2.get_capture(257)
self.verify_capture_labelled(self.pg2, rx, tx,
[VppMplsLabel(3401, ttl=63)])
rx = self.pg3.get_capture(257)
self.verify_capture_labelled(self.pg3, rx, tx,
[VppMplsLabel(3402, ttl=63)])
def test_mcast_head(self):
""" MPLS Multicast Head-end """
MRouteItfFlags = VppEnum.vl_api_mfib_itf_flags_t
MRouteEntryFlags = VppEnum.vl_api_mfib_entry_flags_t
#
# Create a multicast tunnel with two replications
#
mpls_tun = VppMPLSTunnelInterface(
self,
[VppRoutePath(self.pg2.remote_ip4,
self.pg2.sw_if_index,
labels=[VppMplsLabel(42)]),
VppRoutePath(self.pg3.remote_ip4,
self.pg3.sw_if_index,
labels=[VppMplsLabel(43)])],
is_multicast=1)
mpls_tun.add_vpp_config()
mpls_tun.admin_up()
#
# add an unlabelled route through the new tunnel
#
route_10_0_0_3 = VppIpRoute(self, "10.0.0.3", 32,
[VppRoutePath("0.0.0.0",
mpls_tun._sw_if_index)])
route_10_0_0_3.add_vpp_config()
self.vapi.cli("clear trace")
tx = self.create_stream_ip4(self.pg0, "10.0.0.3")
self.pg0.add_stream(tx)
self.pg_enable_capture(self.pg_interfaces)
self.pg_start()
rx = self.pg2.get_capture(257)
self.verify_capture_tunneled_ip4(self.pg0, rx, tx, [VppMplsLabel(42)])
rx = self.pg3.get_capture(257)
self.verify_capture_tunneled_ip4(self.pg0, rx, tx, [VppMplsLabel(43)])
#
# An an IP multicast route via the tunnel
# A (*,G).
# one accepting interface, pg0, 1 forwarding interface via the tunnel
#
route_232_1_1_1 = VppIpMRoute(
self,
"0.0.0.0",
"232.1.1.1", 32,
MRouteEntryFlags.MFIB_API_ENTRY_FLAG_NONE,
[VppMRoutePath(self.pg0.sw_if_index,
MRouteItfFlags.MFIB_API_ITF_FLAG_ACCEPT),
VppMRoutePath(mpls_tun._sw_if_index,
MRouteItfFlags.MFIB_API_ITF_FLAG_FORWARD)])
route_232_1_1_1.add_vpp_config()
self.logger.info(self.vapi.cli("sh ip mfib index 0"))
self.vapi.cli("clear trace")
tx = self.create_stream_ip4(self.pg0, "232.1.1.1")
self.pg0.add_stream(tx)
self.pg_enable_capture(self.pg_interfaces)
self.pg_start()
rx = self.pg2.get_capture(257)
self.verify_capture_tunneled_ip4(self.pg0, rx, tx, [VppMplsLabel(42)])
rx = self.pg3.get_capture(257)
self.verify_capture_tunneled_ip4(self.pg0, rx, tx, [VppMplsLabel(43)])
def test_mcast_ip4_tail(self):
""" MPLS IPv4 Multicast Tail """
MRouteItfFlags = VppEnum.vl_api_mfib_itf_flags_t
MRouteEntryFlags = VppEnum.vl_api_mfib_entry_flags_t
#
# Add a multicast route that will forward the traffic
# post-disposition
#
route_232_1_1_1 = VppIpMRoute(
self,
"0.0.0.0",
"232.1.1.1", 32,
MRouteEntryFlags.MFIB_API_ENTRY_FLAG_NONE,
table_id=1,
paths=[VppMRoutePath(self.pg1.sw_if_index,
MRouteItfFlags.MFIB_API_ITF_FLAG_FORWARD)])
route_232_1_1_1.add_vpp_config()
#
# An interface receive label that maps traffic to RX on interface
# pg1
# by injecting the packet in on pg0, which is in table 0
# doing an rpf-id and matching a route in table 1
# if the packet egresses, then we must have matched the route in
# table 1
#
route_34_eos = VppMplsRoute(
self, 34, 1,
[VppRoutePath("0.0.0.0",
0xffffffff,
nh_table_id=1,
rpf_id=55)],
is_multicast=1,
eos_proto=FibPathProto.FIB_PATH_NH_PROTO_IP4)
route_34_eos.add_vpp_config()
#
# Drop due to interface lookup miss
#
self.vapi.cli("clear trace")
tx = self.create_stream_labelled_ip4(self.pg0, [VppMplsLabel(34)],
dst_ip="232.1.1.1", n=1)
self.send_and_assert_no_replies(self.pg0, tx, "RPF-ID drop none")
#
# set the RPF-ID of the entry to match the input packet's
#
route_232_1_1_1.update_rpf_id(55)
self.logger.info(self.vapi.cli("sh ip mfib index 1 232.1.1.1"))
tx = self.create_stream_labelled_ip4(self.pg0, [VppMplsLabel(34)],
dst_ip="232.1.1.1")
rx = self.send_and_expect(self.pg0, tx, self.pg1)
self.verify_capture_ip4(self.pg1, rx, tx)
#
# disposed packets have an invalid IPv4 checksum
#
tx = self.create_stream_labelled_ip4(self.pg0, [VppMplsLabel(34)],
dst_ip="232.1.1.1", n=65,
chksum=1)
self.send_and_assert_no_replies(self.pg0, tx, "Invalid Checksum")
#
# set the RPF-ID of the entry to not match the input packet's
#
route_232_1_1_1.update_rpf_id(56)
tx = self.create_stream_labelled_ip4(self.pg0, [VppMplsLabel(34)],
dst_ip="232.1.1.1")
self.send_and_assert_no_replies(self.pg0, tx, "RPF-ID drop 56")
def test_mcast_ip6_tail(self):
""" MPLS IPv6 Multicast Tail """
MRouteItfFlags = VppEnum.vl_api_mfib_itf_flags_t
MRouteEntryFlags = VppEnum.vl_api_mfib_entry_flags_t
#
# Add a multicast route that will forward the traffic
# post-disposition
#
route_ff = VppIpMRoute(
self,
"::",
"ff01::1", 32,
MRouteEntryFlags.MFIB_API_ENTRY_FLAG_NONE,
table_id=1,
paths=[VppMRoutePath(self.pg1.sw_if_index,
MRouteItfFlags.MFIB_API_ITF_FLAG_FORWARD,
proto=FibPathProto.FIB_PATH_NH_PROTO_IP6)])
route_ff.add_vpp_config()
#
# An interface receive label that maps traffic to RX on interface
# pg1
# by injecting the packet in on pg0, which is in table 0
# doing an rpf-id and matching a route in table 1
# if the packet egresses, then we must have matched the route in
# table 1
#
route_34_eos = VppMplsRoute(
self, 34, 1,
[VppRoutePath("::",
0xffffffff,
nh_table_id=1,
rpf_id=55)],
is_multicast=1,
eos_proto=FibPathProto.FIB_PATH_NH_PROTO_IP6)
route_34_eos.add_vpp_config()
#
# Drop due to interface lookup miss
#
tx = self.create_stream_labelled_ip6(self.pg0, [VppMplsLabel(34)],
dst_ip="ff01::1")
self.send_and_assert_no_replies(self.pg0, tx, "RPF Miss")
#
# set the RPF-ID of the entry to match the input packet's
#
route_ff.update_rpf_id(55)
tx = self.create_stream_labelled_ip6(self.pg0, [VppMplsLabel(34)],
dst_ip="ff01::1")
rx = self.send_and_expect(self.pg0, tx, self.pg1)
self.verify_capture_ip6(self.pg1, rx, tx)
#
# disposed packets have hop-limit = 1
#
tx = self.create_stream_labelled_ip6(self.pg0,
[VppMplsLabel(34)],
dst_ip="ff01::1",
hlim=1)
rx = self.send_and_expect(self.pg0, tx, self.pg0)
self.verify_capture_ip6_icmp(self.pg0, rx, tx)
#
# set the RPF-ID of the entry to not match the input packet's
#
route_ff.update_rpf_id(56)
tx = self.create_stream_labelled_ip6(self.pg0,
[VppMplsLabel(34)],
dst_ip="ff01::1")
self.send_and_assert_no_replies(self.pg0, tx, "RPF-ID drop 56")
def test_6pe(self):
""" MPLS 6PE """
#
# Add a non-recursive route with a single out label
#
route_10_0_0_1 = VppIpRoute(self, "10.0.0.1", 32,
[VppRoutePath(self.pg0.remote_ip4,
self.pg0.sw_if_index,
labels=[VppMplsLabel(45)])])
route_10_0_0_1.add_vpp_config()
# bind a local label to the route
binding = VppMplsIpBind(self, 44, "10.0.0.1", 32)
binding.add_vpp_config()
#
# a labelled v6 route that resolves through the v4
#
route_2001_3 = VppIpRoute(
self, "2001::3", 128,
[VppRoutePath("10.0.0.1",
INVALID_INDEX,
labels=[VppMplsLabel(32)])])
route_2001_3.add_vpp_config()
tx = self.create_stream_ip6(self.pg0, "2001::3")
rx = self.send_and_expect(self.pg0, tx, self.pg0)
self.verify_capture_labelled_ip6(self.pg0, rx, tx,
[VppMplsLabel(45),
VppMplsLabel(32)])
#
# and a v4 recursive via the v6
#
route_20_3 = VppIpRoute(
self, "20.0.0.3", 32,
[VppRoutePath("2001::3",
INVALID_INDEX,
labels=[VppMplsLabel(99)])])
route_20_3.add_vpp_config()
tx = self.create_stream_ip4(self.pg0, "20.0.0.3")
rx = self.send_and_expect(self.pg0, tx, self.pg0)
self.verify_capture_labelled_ip4(self.pg0, rx, tx,
[VppMplsLabel(45),
VppMplsLabel(32),
VppMplsLabel(99)])
class TestMPLSDisabled(VppTestCase):
""" MPLS disabled """
@classmethod
def setUpClass(cls):
super(TestMPLSDisabled, cls).setUpClass()
@classmethod
def tearDownClass(cls):
super(TestMPLSDisabled, cls).tearDownClass()
def setUp(self):
super(TestMPLSDisabled, self).setUp()
# create 2 pg interfaces
self.create_pg_interfaces(range(2))
self.tbl = VppMplsTable(self, 0)
self.tbl.add_vpp_config()
# PG0 is MPLS enabled
self.pg0.admin_up()
self.pg0.config_ip4()
self.pg0.resolve_arp()
self.pg0.enable_mpls()
# PG 1 is not MPLS enabled
self.pg1.admin_up()
def tearDown(self):
for i in self.pg_interfaces:
i.unconfig_ip4()
i.admin_down()
self.pg0.disable_mpls()
super(TestMPLSDisabled, self).tearDown()
def test_mpls_disabled(self):
""" MPLS Disabled """
tx = (Ether(src=self.pg1.remote_mac,
dst=self.pg1.local_mac) /
MPLS(label=32, ttl=64) /
IPv6(src="2001::1", dst=self.pg0.remote_ip6) /
UDP(sport=1234, dport=1234) /
Raw(b'\xa5' * 100))
#
# A simple MPLS xconnect - eos label in label out
#
route_32_eos = VppMplsRoute(self, 32, 1,
[VppRoutePath(self.pg0.remote_ip4,
self.pg0.sw_if_index,
labels=[33])])
route_32_eos.add_vpp_config()
#
# PG1 does not forward IP traffic
#
self.send_and_assert_no_replies(self.pg1, tx, "MPLS disabled")
#
# MPLS enable PG1
#
self.pg1.enable_mpls()
#
# Now we get packets through
#
self.pg1.add_stream(tx)
self.pg_enable_capture(self.pg_interfaces)
self.pg_start()
rx = self.pg0.get_capture(1)
#
# Disable PG1
#
self.pg1.disable_mpls()
#
# PG1 does not forward IP traffic
#
self.send_and_assert_no_replies(self.pg1, tx, "IPv6 disabled")
self.send_and_assert_no_replies(self.pg1, tx, "IPv6 disabled")
class TestMPLSPIC(VppTestCase):
""" MPLS Prefix-Independent Convergence (PIC) edge convergence """
@classmethod
def setUpClass(cls):
super(TestMPLSPIC, cls).setUpClass()
@classmethod
def tearDownClass(cls):
super(TestMPLSPIC, cls).tearDownClass()
def setUp(self):
super(TestMPLSPIC, self).setUp()
# create 2 pg interfaces
self.create_pg_interfaces(range(4))
mpls_tbl = VppMplsTable(self, 0)
mpls_tbl.add_vpp_config()
tbl4 = VppIpTable(self, 1)
tbl4.add_vpp_config()
tbl6 = VppIpTable(self, 1, is_ip6=1)
tbl6.add_vpp_config()
# core links
self.pg0.admin_up()
self.pg0.config_ip4()
self.pg0.resolve_arp()
self.pg0.enable_mpls()
self.pg1.admin_up()
self.pg1.config_ip4()
self.pg1.resolve_arp()
self.pg1.enable_mpls()
# VRF (customer facing) link
self.pg2.admin_up()
self.pg2.set_table_ip4(1)
self.pg2.config_ip4()
self.pg2.resolve_arp()
self.pg2.set_table_ip6(1)
self.pg2.config_ip6()
self.pg2.resolve_ndp()
self.pg3.admin_up()
self.pg3.set_table_ip4(1)
self.pg3.config_ip4()
self.pg3.resolve_arp()
self.pg3.set_table_ip6(1)
self.pg3.config_ip6()
self.pg3.resolve_ndp()
def tearDown(self):
self.pg0.disable_mpls()
self.pg1.disable_mpls()
for i in self.pg_interfaces:
i.unconfig_ip4()
i.unconfig_ip6()
i.set_table_ip4(0)
i.set_table_ip6(0)
i.admin_down()
super(TestMPLSPIC, self).tearDown()
def test_mpls_ibgp_pic(self):
""" MPLS iBGP Prefix-Independent Convergence (PIC) edge convergence
1) setup many iBGP VPN routes via a pair of iBGP peers.
2) Check EMCP forwarding to these peers
3) withdraw the IGP route to one of these peers.
4) check forwarding continues to the remaining peer
"""
#
# IGP+LDP core routes
#
core_10_0_0_45 = VppIpRoute(self, "10.0.0.45", 32,
[VppRoutePath(self.pg0.remote_ip4,
self.pg0.sw_if_index,
labels=[45])])
core_10_0_0_45.add_vpp_config()
core_10_0_0_46 = VppIpRoute(self, "10.0.0.46", 32,
[VppRoutePath(self.pg1.remote_ip4,
self.pg1.sw_if_index,
labels=[46])])
core_10_0_0_46.add_vpp_config()
#
# Lot's of VPN routes. We need more the 64 so VPP will build
# the fast convergence indirection
#
vpn_routes = []
pkts = []
for ii in range(NUM_PKTS):
dst = "192.168.1.%d" % ii
vpn_routes.append(VppIpRoute(
self, dst, 32,
[VppRoutePath(
"10.0.0.45",
0xffffffff,
labels=[145],
flags=FibPathFlags.FIB_PATH_FLAG_RESOLVE_VIA_HOST),
VppRoutePath(
"10.0.0.46",
0xffffffff,
labels=[146],
flags=FibPathFlags.FIB_PATH_FLAG_RESOLVE_VIA_HOST)],
table_id=1))
vpn_routes[ii].add_vpp_config()
pkts.append(Ether(dst=self.pg2.local_mac,
src=self.pg2.remote_mac) /
IP(src=self.pg2.remote_ip4, dst=dst) /
UDP(sport=1234, dport=1234) /
Raw(b'\xa5' * 100))
#
# Send the packet stream (one pkt to each VPN route)
# - expect a 50-50 split of the traffic
#
self.pg2.add_stream(pkts)
self.pg_enable_capture(self.pg_interfaces)
self.pg_start()
rx0 = self.pg0._get_capture(NUM_PKTS)
rx1 = self.pg1._get_capture(NUM_PKTS)
# not testing the LB hashing algorithm so we're not concerned
# with the split ratio, just as long as neither is 0
self.assertNotEqual(0, len(rx0))
self.assertNotEqual(0, len(rx1))
self.assertEqual(len(pkts), len(rx0) + len(rx1),
"Expected all (%s) packets across both ECMP paths. "
"rx0: %s rx1: %s." % (len(pkts), len(rx0), len(rx1)))
#
# use a test CLI command to stop the FIB walk process, this
# will prevent the FIB converging the VPN routes and thus allow
# us to probe the interim (post-fail, pre-converge) state
#
self.vapi.ppcli("test fib-walk-process disable")
#
# Withdraw one of the IGP routes
#
core_10_0_0_46.remove_vpp_config()
#
# now all packets should be forwarded through the remaining peer
#
self.vapi.ppcli("clear trace")
self.pg2.add_stream(pkts)
self.pg_enable_capture(self.pg_interfaces)
self.pg_start()
rx0 = self.pg0.get_capture(NUM_PKTS)
self.assertEqual(len(pkts), len(rx0),
"Expected all (%s) packets across single path. "
"rx0: %s." % (len(pkts), len(rx0)))
#
# enable the FIB walk process to converge the FIB
#
self.vapi.ppcli("test fib-walk-process enable")
#
# packets should still be forwarded through the remaining peer
#
self.pg2.add_stream(pkts)
self.pg_enable_capture(self.pg_interfaces)
self.pg_start()
rx0 = self.pg0.get_capture(NUM_PKTS)
self.assertEqual(len(pkts), len(rx0),
"Expected all (%s) packets across single path. "
"rx0: %s." % (len(pkts), len(rx0)))
#
# Add the IGP route back and we return to load-balancing
#
core_10_0_0_46.add_vpp_config()
self.pg2.add_stream(pkts)
self.pg_enable_capture(self.pg_interfaces)
self.pg_start()
rx0 = self.pg0._get_capture(NUM_PKTS)
rx1 = self.pg1._get_capture(NUM_PKTS)
self.assertNotEqual(0, len(rx0))
self.assertNotEqual(0, len(rx1))
self.assertEqual(len(pkts), len(rx0) + len(rx1),
"Expected all (%s) packets across both ECMP paths. "
"rx0: %s rx1: %s." % (len(pkts), len(rx0), len(rx1)))
def test_mpls_ebgp_pic(self):
""" MPLS eBGP Prefix-Independent Convergence (PIC) edge convergence
1) setup many eBGP VPN routes via a pair of eBGP peers.
2) Check EMCP forwarding to these peers
3) withdraw one eBGP path - expect LB across remaining eBGP
"""
#
# Lot's of VPN routes. We need more the 64 so VPP will build
# the fast convergence indirection
#
vpn_routes = []
vpn_bindings = []
pkts = []
for ii in range(NUM_PKTS):
dst = "192.168.1.%d" % ii
local_label = 1600 + ii
vpn_routes.append(VppIpRoute(
self, dst, 32,
[VppRoutePath(
self.pg2.remote_ip4,
0xffffffff,
nh_table_id=1,
flags=FibPathFlags.FIB_PATH_FLAG_RESOLVE_VIA_ATTACHED),
VppRoutePath(
self.pg3.remote_ip4,
0xffffffff,
nh_table_id=1,
flags=FibPathFlags.FIB_PATH_FLAG_RESOLVE_VIA_ATTACHED)],
table_id=1))
vpn_routes[ii].add_vpp_config()
vpn_bindings.append(VppMplsIpBind(self, local_label, dst, 32,
ip_table_id=1))
vpn_bindings[ii].add_vpp_config()
pkts.append(Ether(dst=self.pg0.local_mac,
src=self.pg0.remote_mac) /
MPLS(label=local_label, ttl=64) /
IP(src=self.pg0.remote_ip4, dst=dst) /
UDP(sport=1234, dport=1234) /
Raw(b'\xa5' * 100))
#
# Send the packet stream (one pkt to each VPN route)
# - expect a 50-50 split of the traffic
#
self.pg0.add_stream(pkts)
self.pg_enable_capture(self.pg_interfaces)
self.pg_start()
rx0 = self.pg2._get_capture(NUM_PKTS)
rx1 = self.pg3._get_capture(NUM_PKTS)
# not testing the LB hashing algorithm so we're not concerned
# with the split ratio, just as long as neither is 0
self.assertNotEqual(0, len(rx0))
self.assertNotEqual(0, len(rx1))
self.assertEqual(len(pkts), len(rx0) + len(rx1),
"Expected all (%s) packets across both ECMP paths. "
"rx0: %s rx1: %s." % (len(pkts), len(rx0), len(rx1)))
#
# use a test CLI command to stop the FIB walk process, this
# will prevent the FIB converging the VPN routes and thus allow
# us to probe the interim (post-fail, pre-converge) state
#
self.vapi.ppcli("test fib-walk-process disable")
#
# withdraw the connected prefix on the interface.
#
self.pg2.unconfig_ip4()
#
# now all packets should be forwarded through the remaining peer
#
self.pg0.add_stream(pkts)
self.pg_enable_capture(self.pg_interfaces)
self.pg_start()
rx0 = self.pg3.get_capture(NUM_PKTS)
self.assertEqual(len(pkts), len(rx0),
"Expected all (%s) packets across single path. "
"rx0: %s." % (len(pkts), len(rx0)))
#
# enable the FIB walk process to converge the FIB
#
self.vapi.ppcli("test fib-walk-process enable")
#
# packets should still be forwarded through the remaining peer
#
self.pg0.add_stream(pkts)
self.pg_enable_capture(self.pg_interfaces)
self.pg_start()
rx0 = self.pg3.get_capture(NUM_PKTS)
self.assertEqual(len(pkts), len(rx0),
"Expected all (%s) packets across single path. "
"rx0: %s." % (len(pkts), len(rx0)))
#
# put the connected routes back
#
self.pg2.config_ip4()
self.pg2.resolve_arp()
self.pg0.add_stream(pkts)
self.pg_enable_capture(self.pg_interfaces)
self.pg_start()
rx0 = self.pg2._get_capture(NUM_PKTS)
rx1 = self.pg3._get_capture(NUM_PKTS)
self.assertNotEqual(0, len(rx0))
self.assertNotEqual(0, len(rx1))
self.assertEqual(len(pkts), len(rx0) + len(rx1),
"Expected all (%s) packets across both ECMP paths. "
"rx0: %s rx1: %s." % (len(pkts), len(rx0), len(rx1)))
def test_mpls_v6_ebgp_pic(self):
""" MPLSv6 eBGP Prefix-Independent Convergence (PIC) edge convergence
1) setup many eBGP VPNv6 routes via a pair of eBGP peers
2) Check EMCP forwarding to these peers
3) withdraw one eBGP path - expect LB across remaining eBGP
"""
#
# Lot's of VPN routes. We need more the 64 so VPP will build
# the fast convergence indirection
#
vpn_routes = []
vpn_bindings = []
pkts = []
for ii in range(NUM_PKTS):
dst = "3000::%d" % ii
local_label = 1600 + ii
vpn_routes.append(VppIpRoute(
self, dst, 128,
[VppRoutePath(
self.pg2.remote_ip6,
0xffffffff,
nh_table_id=1,
flags=FibPathFlags.FIB_PATH_FLAG_RESOLVE_VIA_ATTACHED),
VppRoutePath(
self.pg3.remote_ip6,
0xffffffff,
nh_table_id=1,
flags=FibPathFlags.FIB_PATH_FLAG_RESOLVE_VIA_ATTACHED)],
table_id=1))
vpn_routes[ii].add_vpp_config()
vpn_bindings.append(VppMplsIpBind(self, local_label, dst, 128,
ip_table_id=1))
vpn_bindings[ii].add_vpp_config()
pkts.append(Ether(dst=self.pg0.local_mac,
src=self.pg0.remote_mac) /
MPLS(label=local_label, ttl=64) /
IPv6(src=self.pg0.remote_ip6, dst=dst) /
UDP(sport=1234, dport=1234) /
Raw(b'\xa5' * 100))
self.logger.info(self.vapi.cli("sh ip6 fib %s" % dst))
self.pg0.add_stream(pkts)
self.pg_enable_capture(self.pg_interfaces)
self.pg_start()
rx0 = self.pg2._get_capture(NUM_PKTS)
rx1 = self.pg3._get_capture(NUM_PKTS)
self.assertNotEqual(0, len(rx0))
self.assertNotEqual(0, len(rx1))
self.assertEqual(len(pkts), len(rx0) + len(rx1),
"Expected all (%s) packets across both ECMP paths. "
"rx0: %s rx1: %s." % (len(pkts), len(rx0), len(rx1)))
#
# use a test CLI command to stop the FIB walk process, this
# will prevent the FIB converging the VPN routes and thus allow
# us to probe the interim (post-fail, pre-converge) state
#
self.vapi.ppcli("test fib-walk-process disable")
#
# withdraw the connected prefix on the interface.
# and shutdown the interface so the ND cache is flushed.
#
self.pg2.unconfig_ip6()
self.pg2.admin_down()
#
# now all packets should be forwarded through the remaining peer
#
self.pg0.add_stream(pkts)
self.pg_enable_capture(self.pg_interfaces)
self.pg_start()
rx0 = self.pg3.get_capture(NUM_PKTS)
self.assertEqual(len(pkts), len(rx0),
"Expected all (%s) packets across single path. "
"rx0: %s." % (len(pkts), len(rx0)))
#
# enable the FIB walk process to converge the FIB
#
self.vapi.ppcli("test fib-walk-process enable")
self.pg0.add_stream(pkts)
self.pg_enable_capture(self.pg_interfaces)
self.pg_start()
rx0 = self.pg3.get_capture(NUM_PKTS)
self.assertEqual(len(pkts), len(rx0),
"Expected all (%s) packets across single path. "
"rx0: %s." % (len(pkts), len(rx0)))
#
# put the connected routes back
#
self.logger.info(self.vapi.cli("sh log"))
self.pg2.admin_up()
self.pg2.config_ip6()
self.pg2.resolve_ndp()
self.pg0.add_stream(pkts)
self.pg_enable_capture(self.pg_interfaces)
self.pg_start()
rx0 = self.pg2._get_capture(NUM_PKTS)
rx1 = self.pg3._get_capture(NUM_PKTS)
self.assertNotEqual(0, len(rx0))
self.assertNotEqual(0, len(rx1))
self.assertEqual(len(pkts), len(rx0) + len(rx1),
"Expected all (%s) packets across both ECMP paths. "
"rx0: %s rx1: %s." % (len(pkts), len(rx0), len(rx1)))
class TestMPLSL2(VppTestCase):
""" MPLS-L2 """
@classmethod
def setUpClass(cls):
super(TestMPLSL2, cls).setUpClass()
@classmethod
def tearDownClass(cls):
super(TestMPLSL2, cls).tearDownClass()
def setUp(self):
super(TestMPLSL2, self).setUp()
# create 2 pg interfaces
self.create_pg_interfaces(range(2))
# create the default MPLS table
self.tables = []
tbl = VppMplsTable(self, 0)
tbl.add_vpp_config()
self.tables.append(tbl)
# use pg0 as the core facing interface, don't resolve ARP
self.pg0.admin_up()
self.pg0.config_ip4()
self.pg0.enable_mpls()
# use the other 2 for customer facing L2 links
for i in self.pg_interfaces[1:]:
i.admin_up()
def tearDown(self):
for i in self.pg_interfaces[1:]:
i.admin_down()
self.pg0.disable_mpls()
self.pg0.unconfig_ip4()
self.pg0.admin_down()
super(TestMPLSL2, self).tearDown()
def verify_capture_tunneled_ethernet(self, capture, sent, mpls_labels):
capture = verify_filter(capture, sent)
self.assertEqual(len(capture), len(sent))
for i in range(len(capture)):
tx = sent[i]
rx = capture[i]
# the MPLS TTL is 255 since it enters a new tunnel
verify_mpls_stack(self, rx, mpls_labels)
tx_eth = tx[Ether]
rx_eth = Ether(scapy.compat.raw(rx[MPLS].payload))
self.assertEqual(rx_eth.src, tx_eth.src)
self.assertEqual(rx_eth.dst, tx_eth.dst)
def verify_arp_req(self, rx, smac, sip, dip):
ether = rx[Ether]
self.assertEqual(ether.dst, "ff:ff:ff:ff:ff:ff")
self.assertEqual(ether.src, smac)
arp = rx[ARP]
self.assertEqual(arp.hwtype, 1)
self.assertEqual(arp.ptype, 0x800)
self.assertEqual(arp.hwlen, 6)
self.assertEqual(arp.plen, 4)
self.assertEqual(arp.op, ARP.who_has)
self.assertEqual(arp.hwsrc, smac)
self.assertEqual(arp.hwdst, "00:00:00:00:00:00")
self.assertEqual(arp.psrc, sip)
self.assertEqual(arp.pdst, dip)
def test_vpws(self):
""" Virtual Private Wire Service """
#
# Create an MPLS tunnel that pushes 1 label
# For Ethernet over MPLS the uniform mode is irrelevant since ttl/cos
# information is not in the packet, but we test it works anyway
#
mpls_tun_1 = VppMPLSTunnelInterface(
self,
[VppRoutePath(self.pg0.remote_ip4,
self.pg0.sw_if_index,
labels=[VppMplsLabel(42, MplsLspMode.UNIFORM)])],
is_l2=1)
mpls_tun_1.add_vpp_config()
mpls_tun_1.admin_up()
#
# Create a label entry to for 55 that does L2 input to the tunnel
#
route_55_eos = VppMplsRoute(
self, 55, 1,
[VppRoutePath("0.0.0.0",
mpls_tun_1.sw_if_index,
type=FibPathType.FIB_PATH_TYPE_INTERFACE_RX,
proto=FibPathProto.FIB_PATH_NH_PROTO_ETHERNET)],
eos_proto=FibPathProto.FIB_PATH_NH_PROTO_ETHERNET)
route_55_eos.add_vpp_config()
#
# Cross-connect the tunnel with one of the customers L2 interfaces
#
self.vapi.sw_interface_set_l2_xconnect(self.pg1.sw_if_index,
mpls_tun_1.sw_if_index,
enable=1)
self.vapi.sw_interface_set_l2_xconnect(mpls_tun_1.sw_if_index,
self.pg1.sw_if_index,
enable=1)
#
# inject a packet from the core
#
pcore = (Ether(dst=self.pg0.local_mac,
src=self.pg0.remote_mac) /
MPLS(label=55, ttl=64) /
Ether(dst="00:00:de:ad:ba:be",
src="00:00:de:ad:be:ef") /
IP(src="10.10.10.10", dst="11.11.11.11") /
UDP(sport=1234, dport=1234) /
Raw(b'\xa5' * 100))
tx0 = pcore * NUM_PKTS
rx0 = self.send_and_expect(self.pg0, tx0, self.pg1)
payload = pcore[MPLS].payload
self.assertEqual(rx0[0][Ether].dst, payload[Ether].dst)
self.assertEqual(rx0[0][Ether].src, payload[Ether].src)
#
# Inject a packet from the customer/L2 side
# there's no resolved ARP entry so the first packet we see should be
# an ARP request
#
tx1 = pcore[MPLS].payload
rx1 = self.send_and_expect(self.pg1, [tx1], self.pg0)
self.verify_arp_req(rx1[0],
self.pg0.local_mac,
self.pg0.local_ip4,
self.pg0.remote_ip4)
#
# resolve the ARP entries and send again
#
self.pg0.resolve_arp()
tx1 = pcore[MPLS].payload * NUM_PKTS
rx1 = self.send_and_expect(self.pg1, tx1, self.pg0)
self.verify_capture_tunneled_ethernet(rx1, tx1, [VppMplsLabel(42)])
def test_vpls(self):
""" Virtual Private LAN Service """
# we skipped this in the setup
self.pg0.resolve_arp()
#
# Create a L2 MPLS tunnels
#
mpls_tun1 = VppMPLSTunnelInterface(
self,
[VppRoutePath(self.pg0.remote_ip4,
self.pg0.sw_if_index,
labels=[VppMplsLabel(42)])],
is_l2=1)
mpls_tun1.add_vpp_config()
mpls_tun1.admin_up()
mpls_tun2 = VppMPLSTunnelInterface(
self,
[VppRoutePath(self.pg0.remote_ip4,
self.pg0.sw_if_index,
labels=[VppMplsLabel(43)])],
is_l2=1)
mpls_tun2.add_vpp_config()
mpls_tun2.admin_up()
#
# Create a label entries, 55 and 56, that do L2 input to the tunnel
# the latter includes a Psuedo Wire Control Word
#
route_55_eos = VppMplsRoute(
self, 55, 1,
[VppRoutePath("0.0.0.0",
mpls_tun1.sw_if_index,
type=FibPathType.FIB_PATH_TYPE_INTERFACE_RX,
proto=FibPathProto.FIB_PATH_NH_PROTO_ETHERNET)],
eos_proto=FibPathProto.FIB_PATH_NH_PROTO_ETHERNET)
route_56_eos = VppMplsRoute(
self, 56, 1,
[VppRoutePath("0.0.0.0",
mpls_tun2.sw_if_index,
type=FibPathType.FIB_PATH_TYPE_INTERFACE_RX,
flags=FibPathFlags.FIB_PATH_FLAG_POP_PW_CW,
proto=FibPathProto.FIB_PATH_NH_PROTO_ETHERNET)],
eos_proto=FibPathProto.FIB_PATH_NH_PROTO_ETHERNET)
# move me
route_56_eos.add_vpp_config()
route_55_eos.add_vpp_config()
self.logger.info(self.vapi.cli("sh mpls fib 56"))
#
# add to tunnel to the customers bridge-domain
#
self.vapi.sw_interface_set_l2_bridge(
rx_sw_if_index=mpls_tun1.sw_if_index, bd_id=1)
self.vapi.sw_interface_set_l2_bridge(
rx_sw_if_index=mpls_tun2.sw_if_index, bd_id=1)
self.vapi.sw_interface_set_l2_bridge(
rx_sw_if_index=self.pg1.sw_if_index, bd_id=1)
#
# Packet from host on the customer interface to each host
# reachable over the core, and vice-versa
#
p_cust1 = (Ether(dst="00:00:de:ad:ba:b1",
src="00:00:de:ad:be:ef") /
IP(src="10.10.10.10", dst="11.11.11.11") /
UDP(sport=1234, dport=1234) /
Raw(b'\xa5' * 100))
p_cust2 = (Ether(dst="00:00:de:ad:ba:b2",
src="00:00:de:ad:be:ef") /
IP(src="10.10.10.10", dst="11.11.11.12") /
UDP(sport=1234, dport=1234) /
Raw(b'\xa5' * 100))
p_core1 = (Ether(dst=self.pg0.local_mac,
src=self.pg0.remote_mac) /
MPLS(label=55, ttl=64) /
Ether(src="00:00:de:ad:ba:b1",
dst="00:00:de:ad:be:ef") /
IP(dst="10.10.10.10", src="11.11.11.11") /
UDP(sport=1234, dport=1234) /
Raw(b'\xa5' * 100))
p_core2 = (Ether(dst=self.pg0.local_mac,
src=self.pg0.remote_mac) /
MPLS(label=56, ttl=64) /
Raw(b'\x01' * 4) / # PW CW
Ether(src="00:00:de:ad:ba:b2",
dst="00:00:de:ad:be:ef") /
IP(dst="10.10.10.10", src="11.11.11.12") /
UDP(sport=1234, dport=1234) /
Raw(b'\xa5' * 100))
#
# The BD is learning, so send in one of each packet to learn
#
# 2 packets due to BD flooding
rx = self.send_and_expect(self.pg1, p_cust1, self.pg0, n_rx=2)
rx = self.send_and_expect(self.pg1, p_cust2, self.pg0, n_rx=2)
# we've learnt this so expect it be be forwarded not flooded
rx = self.send_and_expect(self.pg0, [p_core1], self.pg1)
self.assertEqual(rx[0][Ether].dst, p_cust1[Ether].src)
self.assertEqual(rx[0][Ether].src, p_cust1[Ether].dst)
rx = self.send_and_expect(self.pg0, [p_core2], self.pg1)
self.assertEqual(rx[0][Ether].dst, p_cust2[Ether].src)
self.assertEqual(rx[0][Ether].src, p_cust2[Ether].dst)
#
# now a stream in each direction from each host
#
rx = self.send_and_expect(self.pg1, p_cust1 * NUM_PKTS, self.pg0)
self.verify_capture_tunneled_ethernet(rx, p_cust1 * NUM_PKTS,
[VppMplsLabel(42)])
rx = self.send_and_expect(self.pg1, p_cust2 * NUM_PKTS, self.pg0)
self.verify_capture_tunneled_ethernet(rx, p_cust2 * NUM_PKTS,
[VppMplsLabel(43)])
rx = self.send_and_expect(self.pg0, p_core1 * NUM_PKTS, self.pg1)
rx = self.send_and_expect(self.pg0, p_core2 * NUM_PKTS, self.pg1)
#
# remove interfaces from customers bridge-domain
#
self.vapi.sw_interface_set_l2_bridge(
rx_sw_if_index=mpls_tun1.sw_if_index, bd_id=1, enable=0)
self.vapi.sw_interface_set_l2_bridge(
rx_sw_if_index=mpls_tun2.sw_if_index, bd_id=1, enable=0)
self.vapi.sw_interface_set_l2_bridge(
rx_sw_if_index=self.pg1.sw_if_index, bd_id=1, enable=0)
if __name__ == '__main__':
unittest.main(testRunner=VppTestRunner)
Reference in New Issue View Git Blame Copy Permalink