vpp/test/test_vxlan_gpe.py

#!/usr/bin/env python3

import socket
from util import ip4_range
import unittest
from config import config
from framework import VppTestCase, VppTestRunner
from template_bd import BridgeDomain

from scapy.layers.l2 import Ether
from scapy.packet import Raw, bind_layers
from scapy.layers.inet import IP, UDP
from scapy.layers.vxlan import VXLAN

import util
from vpp_ip_route import VppIpRoute, VppRoutePath
from vpp_vxlan_gpe_tunnel import VppVxlanGpeTunnel
from vpp_ip import INVALID_INDEX


@unittest.skipUnless(config.extended, "part of extended tests")
class TestVxlanGpe(BridgeDomain, VppTestCase):
    """VXLAN-GPE Test Case"""

    def __init__(self, *args):
        BridgeDomain.__init__(self)
        VppTestCase.__init__(self, *args)

    def encapsulate(self, pkt, vni):
        """
        Encapsulate the original payload frame by adding VXLAN-GPE header
        with its UDP, IP and Ethernet fields
        """
        return (
            Ether(src=self.pg0.remote_mac, dst=self.pg0.local_mac)
            / IP(src=self.pg0.remote_ip4, dst=self.pg0.local_ip4)
            / UDP(sport=self.dport, dport=self.dport, chksum=0)
            / VXLAN(vni=vni, flags=self.flags)
            / pkt
        )

    def ip_range(self, start, end):
        """range of remote ip's"""
        return ip4_range(self.pg0.remote_ip4, start, end)

    def encap_mcast(self, pkt, src_ip, src_mac, vni):
        """
        Encapsulate the original payload frame by adding VXLAN-GPE header
        with its UDP, IP and Ethernet fields
        """
        return (
            Ether(src=src_mac, dst=self.mcast_mac)
            / IP(src=src_ip, dst=self.mcast_ip4)
            / UDP(sport=self.dport, dport=self.dport, chksum=0)
            / VXLAN(vni=vni, flags=self.flags)
            / pkt
        )

    def decapsulate(self, pkt):
        """
        Decapsulate the original payload frame by removing VXLAN-GPE header
        """
        # check if is set I and P flag
        self.assertEqual(pkt[VXLAN].flags, 0x0C)
        return pkt[VXLAN].payload

    # Method for checking VXLAN-GPE encapsulation.
    #
    def check_encapsulation(self, pkt, vni, local_only=False, mcast_pkt=False):
        # Verify source MAC is VPP_MAC and destination MAC is MY_MAC resolved
        #  by VPP using ARP.
        self.assertEqual(pkt[Ether].src, self.pg0.local_mac)
        if not local_only:
            if not mcast_pkt:
                self.assertEqual(pkt[Ether].dst, self.pg0.remote_mac)
            else:
                self.assertEqual(pkt[Ether].dst, type(self).mcast_mac)
        # Verify VXLAN-GPE tunnel src IP is VPP_IP and dst IP is MY_IP.
        self.assertEqual(pkt[IP].src, self.pg0.local_ip4)
        if not local_only:
            if not mcast_pkt:
                self.assertEqual(pkt[IP].dst, self.pg0.remote_ip4)
            else:
                self.assertEqual(pkt[IP].dst, type(self).mcast_ip4)
        # Verify UDP destination port is VXLAN-GPE 4790, source UDP port
        #  could be arbitrary.
        self.assertEqual(pkt[UDP].dport, self.dport)
        # Verify UDP checksum
        self.assert_udp_checksum_valid(pkt)
        # Verify VNI
        self.assertEqual(pkt[VXLAN].vni, vni)

    @classmethod
    def create_vxlan_gpe_flood_test_bd(cls, vni, n_ucast_tunnels, port):
        # Create 10 ucast vxlan tunnels under bd
        ip_range_start = 10
        ip_range_end = ip_range_start + n_ucast_tunnels
        next_hop_address = cls.pg0.remote_ip4
        for dest_ip4 in ip4_range(next_hop_address, ip_range_start, ip_range_end):
            # add host route so dest_ip4n will not be resolved
            rip = VppIpRoute(
                cls,
                dest_ip4,
                32,
                [VppRoutePath(next_hop_address, INVALID_INDEX)],
                register=False,
            )
            rip.add_vpp_config()

            r = VppVxlanGpeTunnel(
                cls,
                src_addr=cls.pg0.local_ip4,
                dst_addr=dest_ip4,
                src_port=port,
                dst_port=port,
                vni=vni,
            )
            r.add_vpp_config()
            cls.vapi.sw_interface_set_l2_bridge(rx_sw_if_index=r.sw_if_index, bd_id=vni)

    @classmethod
    def add_del_shared_mcast_dst_load(cls, port, is_add):
        """
        add or del tunnels sharing the same mcast dst
        to test vxlan_gpe ref_count mechanism
        """
        n_shared_dst_tunnels = 20
        vni_start = 1000
        vni_end = vni_start + n_shared_dst_tunnels
        for vni in range(vni_start, vni_end):
            r = VppVxlanGpeTunnel(
                cls,
                src_addr=cls.pg0.local_ip4,
                dst_addr=cls.mcast_ip4,
                src_port=port,
                dst_port=port,
                mcast_sw_if_index=1,
                vni=vni,
            )
            if is_add:
                r.add_vpp_config()
                if r.sw_if_index == 0xFFFFFFFF:
                    raise ValueError("bad sw_if_index: ~0")
            else:
                r.remove_vpp_config()

    @classmethod
    def add_shared_mcast_dst_load(cls, port):
        cls.add_del_shared_mcast_dst_load(port=port, is_add=1)

    @classmethod
    def del_shared_mcast_dst_load(cls, port):
        cls.add_del_shared_mcast_dst_load(port=port, is_add=0)

    @classmethod
    def add_del_mcast_tunnels_load(cls, port, is_add):
        """
        add or del tunnels to test vxlan_gpe stability
        """
        n_distinct_dst_tunnels = 20
        ip_range_start = 10
        ip_range_end = ip_range_start + n_distinct_dst_tunnels
        for dest_ip4 in ip4_range(cls.mcast_ip4, ip_range_start, ip_range_end):
            vni = int(dest_ip4.split(".")[3])
            r = VppVxlanGpeTunnel(
                cls,
                src_addr=cls.pg0.local_ip4,
                dst_addr=dest_ip4,
                src_port=port,
                dst_port=port,
                mcast_sw_if_index=1,
                vni=vni,
            )
            if is_add:
                r.add_vpp_config()
            else:
                r.remove_vpp_config()

    @classmethod
    def add_mcast_tunnels_load(cls, port):
        cls.add_del_mcast_tunnels_load(port=port, is_add=1)

    @classmethod
    def del_mcast_tunnels_load(cls, port):
        cls.add_del_mcast_tunnels_load(port=port, is_add=0)

    # Class method to start the VXLAN-GPE test case.
    #  Overrides setUpClass method in VppTestCase class.
    #  Python try..except statement is used to ensure that the tear down of
    #  the class will be executed even if exception is raised.
    #  @param cls The class pointer.
    @classmethod
    def setUpClass(cls):
        super(TestVxlanGpe, cls).setUpClass()

        try:
            cls.flags = 0x0C

            # Create 2 pg interfaces.
            cls.create_pg_interfaces(range(4))
            for pg in cls.pg_interfaces:
                pg.admin_up()

            # Configure IPv4 addresses on VPP pg0.
            cls.pg0.config_ip4()

            # Resolve MAC address for VPP's IP address on pg0.
            cls.pg0.resolve_arp()

            # Our Multicast address
            cls.mcast_ip4 = "239.1.1.1"
            cls.mcast_mac = util.mcast_ip_to_mac(cls.mcast_ip4)
        except Exception:
            cls.tearDownClass()
            raise

    @classmethod
    def tearDownClass(cls):
        super(TestVxlanGpe, cls).tearDownClass()

    def setUp(self):
        super(TestVxlanGpe, self).setUp()

    def createVxLANInterfaces(self, port=4790):
        # Create VXLAN-GPE VTEP on VPP pg0, and put vxlan_gpe_tunnel0
        # and pg1 into BD.
        self.dport = port

        self.single_tunnel_vni = 0xABCDE
        self.single_tunnel_bd = 11
        r = VppVxlanGpeTunnel(
            self,
            src_addr=self.pg0.local_ip4,
            dst_addr=self.pg0.remote_ip4,
            src_port=port,
            dst_port=port,
            vni=self.single_tunnel_vni,
        )
        r.add_vpp_config()
        self.vapi.sw_interface_set_l2_bridge(
            rx_sw_if_index=r.sw_if_index, bd_id=self.single_tunnel_bd
        )
        self.vapi.sw_interface_set_l2_bridge(
            rx_sw_if_index=self.pg1.sw_if_index, bd_id=self.single_tunnel_bd
        )

        # Setup vni 2 to test multicast flooding
        self.n_ucast_tunnels = 10
        self.mcast_flood_bd = 12
        self.create_vxlan_gpe_flood_test_bd(
            self.mcast_flood_bd, self.n_ucast_tunnels, self.dport
        )
        r = VppVxlanGpeTunnel(
            self,
            src_addr=self.pg0.local_ip4,
            dst_addr=self.mcast_ip4,
            src_port=port,
            dst_port=port,
            mcast_sw_if_index=1,
            vni=self.mcast_flood_bd,
        )
        r.add_vpp_config()
        self.vapi.sw_interface_set_l2_bridge(
            rx_sw_if_index=r.sw_if_index, bd_id=self.mcast_flood_bd
        )
        self.vapi.sw_interface_set_l2_bridge(
            rx_sw_if_index=self.pg2.sw_if_index, bd_id=self.mcast_flood_bd
        )

        # Add and delete mcast tunnels to check stability
        self.add_shared_mcast_dst_load(self.dport)
        self.add_mcast_tunnels_load(self.dport)
        self.del_shared_mcast_dst_load(self.dport)
        self.del_mcast_tunnels_load(self.dport)

        # Setup vni 3 to test unicast flooding
        self.ucast_flood_bd = 13
        self.create_vxlan_gpe_flood_test_bd(
            self.ucast_flood_bd, self.n_ucast_tunnels, self.dport
        )
        self.vapi.sw_interface_set_l2_bridge(
            rx_sw_if_index=self.pg3.sw_if_index, bd_id=self.ucast_flood_bd
        )

        # Set scapy listen custom port for VxLAN
        bind_layers(UDP, VXLAN, dport=self.dport)

    """
    Tests with default port (4790)
    """

    def test_decap(self):
        """Decapsulation test
        from BridgeDoman
        """
        self.createVxLANInterfaces()
        super(TestVxlanGpe, self).test_decap()

    def test_encap(self):
        """Encapsulation test
        from BridgeDoman
        """
        self.createVxLANInterfaces()
        super(TestVxlanGpe, self).test_encap()

    def test_ucast_flood(self):
        """Unicast flood test
        from BridgeDoman
        """
        self.createVxLANInterfaces()
        super(TestVxlanGpe, self).test_ucast_flood()

    """
    Tests with custom port (1112)
    """

    def test_decap_custom_port(self):
        """Decapsulation test custom port
        from BridgeDoman
        """
        self.createVxLANInterfaces(1112)
        super(TestVxlanGpe, self).test_decap()

    def test_encap_custom_port(self):
        """Encapsulation test custom port
        from BridgeDoman
        """
        self.createVxLANInterfaces(1112)
        super(TestVxlanGpe, self).test_encap()

    def test_ucast_flood_custom_port(self):
        """Unicast flood test custom port
        from BridgeDoman
        """
        self.createVxLANInterfaces(1112)
        super(TestVxlanGpe, self).test_ucast_flood()

    @unittest.skip("test disabled for vxlan-gpe")
    def test_mcast_flood(self):
        """inherited from BridgeDomain"""
        pass

    @unittest.skip("test disabled for vxlan-gpe")
    def test_mcast_rcv(self):
        """inherited from BridgeDomain"""
        pass

    # Method to define VPP actions before tear down of the test case.
    #  Overrides tearDown method in VppTestCase class.
    #  @param self The object pointer.
    def tearDown(self):
        super(TestVxlanGpe, self).tearDown()

    def show_commands_at_teardown(self):
        self.logger.info(self.vapi.cli("show bridge-domain 11 detail"))
        self.logger.info(self.vapi.cli("show bridge-domain 12 detail"))
        self.logger.info(self.vapi.cli("show bridge-domain 13 detail"))
        self.logger.info(self.vapi.cli("show int"))
        self.logger.info(self.vapi.cli("show vxlan-gpe"))
        self.logger.info(self.vapi.cli("show trace"))


if __name__ == "__main__":
    unittest.main(testRunner=VppTestRunner)