0923a2376f
Change-Id: I87cd2eae133c9f5b9f7764a0f7a41bcc28523e4c Signed-off-by: jdenisco <jdenisco@cisco.com>
91 lines
3.5 KiB
ReStructuredText
91 lines
3.5 KiB
ReStructuredText
.. _mplsfib:
|
||
|
||
MPLS FIB
|
||
----------
|
||
|
||
There is a tight coupling between IP and MPLS forwarding. MPLS forwarding
|
||
equivalence classes (FECs) are often an IP prefix Рthat is to say that traffic
|
||
matching a given IP prefix is routed into a MPLS label switch path (LSP). It is
|
||
thus necessary to be able to associated a given prefix/route with an [out-going]
|
||
MPLS label that will be imposed when the packet is forwarded. This is configured
|
||
as:
|
||
|
||
.. code-block:: console
|
||
|
||
$ ip route add 1.1.1.1/32 via 10.10.10.10 GigabitEthernet0/8/0 out-label 33
|
||
|
||
packets matching 1.1.1.1/32 will be forwarded out GigabitEthernet0/8/0 and have MPLS label
|
||
33 imposed. More than one out-going label can be specified. Out-going MPLS labels
|
||
can be applied to recursive and non-recursive routes, e.g;
|
||
|
||
.. code-block:: console
|
||
|
||
$ ip route add 2.2.2.0/24 via 1.1.1.1 out-label 34
|
||
|
||
packets matching 2.2.2.0/24 will thus have two MPLS labels imposed; 34 and 33.
|
||
This is the realisation of, e,g, an MPLS BGP VPNv4.
|
||
|
||
To associate/allocate a local-label for a prefix, and thus have packets to that
|
||
local-label forwarded equivalently to the prefix do;
|
||
|
||
.. code-block:: console
|
||
|
||
$ mpls local-label 99 2.2.2.0/24
|
||
|
||
In the API this action is called a *bind*.
|
||
|
||
The router receiving the MPLS encapsulated packets needs to be programmed with
|
||
actions associated which each label value Рthis is the role of the MPLS FIB.
|
||
The MPLS FIB Is a table, whose key is the MPLS label value and end-of-stack (EOS)
|
||
bit, which stores the action to perform on packets with matching encapsulation.
|
||
|
||
Currently supported actions are:
|
||
|
||
#. Pop the label and perform an IPv[46] lookup in a specified table
|
||
#. Pop the label and forward via a specified next-hop (this is penultimate-hop-pop, PHP)
|
||
#. Swap the label and forward via a specified next-hop.
|
||
|
||
These can be programmed respectively by:
|
||
|
||
#. mpls local-label 33 ip4-lookup-in-table X
|
||
#. mpls local-label 33 via 10.10.10.10 GigabitEthernet0/8/0
|
||
#. mpls local-label 33 via 10.10.10.10 GigabitEthernet0/8/0 out-label 66
|
||
|
||
the latter is an example of an MPLS cross connect. Any description of a next-hop,
|
||
recursive, non-recursive, labelled, non-labelled, etc, that is valid for an IP
|
||
prefix, is also valid for an MPLS local-label.
|
||
|
||
Implementation
|
||
^^^^^^^^^^^^^^^
|
||
|
||
The MPLS FIB is implemented using exactly the same data structures as the IP FIB.
|
||
The only difference is the implementation of the table. Whereas for IPv4 this is
|
||
an mtrie and for IPv6 a hash table, for MPLS it is a flat array indexed by a 21
|
||
bit key (label & EOS bit). This implementation is chosen to favour packet
|
||
forwarding speed.
|
||
|
||
MPLS Tunnels
|
||
^^^^^^^^^^^^^
|
||
|
||
VPP no longer supports MPLS tunnels that are coupled to a particular transport,
|
||
|
||
i.e. MPLSoGRE or MPLSoEth. Such tight coupling is not beneficial. Instead VPP supports;
|
||
|
||
#. MPLS LSPs associated with IP prefixes and MPLS local-labels (as described above) which are transport independent (i.e. the IP route could be reachable over a GRE tunnel, or any other interface type).
|
||
#. A generic uni-directional MPLS tunnel interface that is transport independent.
|
||
|
||
An MPLS tunnel is effectively an LSP with an associated interface. The LSP can be
|
||
described by any next-hop type (recursive, non-recursive etc), e.g.:
|
||
|
||
mpls tunnel add via 10.10.10.10 GigabitEthernet0/8/0 out-label 66
|
||
IP routes and/or MPLS x-connects can be routed via the interface, e.g.
|
||
|
||
.. code-block:: console
|
||
|
||
$ ip route add 2.2.2.0/24 via mpls-tunnel0
|
||
|
||
packets matching the route for 2.2.2.0/24 would thus have label 66 imposed since
|
||
it is transmitted via the tunnel.
|
||
|
||
These MPLS tunnels can be used to realise MPLS RSVP-TE tunnels.
|