097fa66b98
Enhance the route add/del APIs to take a set of paths rather than just one. Most unicast routing protocols calcualte all the available paths in one run of the algorithm so updating all the paths at once is beneficial for the client. two knobs control the behaviour: is_multipath - if set the the set of paths passed will be added to those that already exist, otherwise the set will replace them. is_add - add or remove the set is_add=0, is_multipath=1 and an empty set, results in deleting the route. It is also considerably faster to add multiple paths at once, than one at a time: vat# ip_add_del_route 1.1.1.1/32 count 100000 multipath via 10.10.10.11 100000 routes in .572240 secs, 174751.80 routes/sec vat# ip_add_del_route 1.1.1.1/32 count 100000 multipath via 10.10.10.12 100000 routes in .528383 secs, 189256.54 routes/sec vat# ip_add_del_route 1.1.1.1/32 count 100000 multipath via 10.10.10.13 100000 routes in .757131 secs, 132077.52 routes/sec vat# ip_add_del_route 1.1.1.1/32 count 100000 multipath via 10.10.10.14 100000 routes in .878317 secs, 113854.12 routes/sec vat# ip_route_add_del 1.1.1.1/32 count 100000 multipath via 10.10.10.11 via 10.10.10.12 via 10.10.10.13 via 10.10.10.14 100000 routes in .900212 secs, 111084.93 routes/sec Change-Id: I416b93f7684745099c1adb0b33edac58c9339c1a Signed-off-by: Neale Ranns <neale.ranns@cisco.com> Signed-off-by: Ole Troan <ot@cisco.com> Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
527 lines
20 KiB
Python
527 lines
20 KiB
Python
#!/usr/bin/env python
|
|
"""IP6 VRF Multi-instance Test Case HLD:
|
|
|
|
**NOTES:**
|
|
- higher number of pg-ip6 interfaces causes problems => only 15 pg-ip6 \
|
|
interfaces in 5 VRFs are tested
|
|
- jumbo packets in configuration with 15 pg-ip6 interfaces leads to \
|
|
problems too
|
|
|
|
**config 1**
|
|
- add 15 pg-ip6 interfaces
|
|
- configure 5 hosts per pg-ip6 interface
|
|
- configure 4 VRFs
|
|
- add 3 pg-ip6 interfaces per VRF
|
|
|
|
**test 1**
|
|
- send IP6 packets between all pg-ip6 interfaces in all VRF groups
|
|
|
|
**verify 1**
|
|
- check VRF data by parsing output of ip_route_dump API command
|
|
- all packets received correctly in case of pg-ip6 interfaces in the same
|
|
VRF
|
|
- no packet received in case of pg-ip6 interfaces not in VRF
|
|
- no packet received in case of pg-ip6 interfaces in different VRFs
|
|
|
|
**config 2**
|
|
- reset 2 VRFs
|
|
|
|
**test 2**
|
|
- send IP6 packets between all pg-ip6 interfaces in all VRF groups
|
|
|
|
**verify 2**
|
|
- check VRF data by parsing output of ip_route_dump API command
|
|
- all packets received correctly in case of pg-ip6 interfaces in the same
|
|
VRF
|
|
- no packet received in case of pg-ip6 interfaces not in VRF
|
|
- no packet received in case of pg-ip6 interfaces in different VRFs
|
|
|
|
**config 3**
|
|
- add 1 of reset VRFs and 1 new VRF
|
|
|
|
**test 3**
|
|
- send IP6 packets between all pg-ip6 interfaces in all VRF groups
|
|
|
|
**verify 3**
|
|
- check VRF data by parsing output of ip_route_dump API command
|
|
- all packets received correctly in case of pg-ip6 interfaces in the same
|
|
VRF
|
|
- no packet received in case of pg-ip6 interfaces not in VRF
|
|
- no packet received in case of pg-ip6 interfaces in different VRFs
|
|
|
|
**config 4**
|
|
- reset all VRFs (i.e. no VRF except VRF=0 created)
|
|
|
|
**test 4**
|
|
- send IP6 packets between all pg-ip6 interfaces in all VRF groups
|
|
|
|
**verify 4**
|
|
- check VRF data by parsing output of ip_route_dump API command
|
|
- all packets received correctly in case of pg-ip6 interfaces in the same
|
|
VRF
|
|
- no packet received in case of pg-ip6 interfaces not in VRF
|
|
- no packet received in case of pg-ip6 interfaces in different VRFs
|
|
"""
|
|
|
|
import unittest
|
|
import random
|
|
import socket
|
|
|
|
from scapy.packet import Raw
|
|
from scapy.layers.l2 import Ether
|
|
from scapy.layers.inet6 import UDP, IPv6, ICMPv6ND_NS, ICMPv6ND_RA, \
|
|
RouterAlert, IPv6ExtHdrHopByHop
|
|
from scapy.utils6 import in6_ismaddr, in6_isllsnmaddr, in6_getAddrType
|
|
from scapy.pton_ntop import inet_ntop
|
|
|
|
from framework import VppTestCase, VppTestRunner
|
|
from util import ppp
|
|
from vrf import VRFState
|
|
|
|
|
|
def is_ipv6_misc_ext(p):
|
|
""" Is packet one of uninteresting IPv6 broadcasts (extended to filter out
|
|
ICMPv6 Neighbor Discovery - Neighbor Advertisement packets too)? """
|
|
if p.haslayer(ICMPv6ND_RA):
|
|
if in6_ismaddr(p[IPv6].dst):
|
|
return True
|
|
if p.haslayer(ICMPv6ND_NS):
|
|
if in6_isllsnmaddr(p[IPv6].dst):
|
|
return True
|
|
if p.haslayer(IPv6ExtHdrHopByHop):
|
|
for o in p[IPv6ExtHdrHopByHop].options:
|
|
if isinstance(o, RouterAlert):
|
|
return True
|
|
return False
|
|
|
|
|
|
class TestIP6VrfMultiInst(VppTestCase):
|
|
""" IP6 VRF Multi-instance Test Case """
|
|
|
|
@classmethod
|
|
def setUpClass(cls):
|
|
"""
|
|
Perform standard class setup (defined by class method setUpClass in
|
|
class VppTestCase) before running the test case, set test case related
|
|
variables and configure VPP.
|
|
"""
|
|
super(TestIP6VrfMultiInst, cls).setUpClass()
|
|
|
|
# Test variables
|
|
cls.hosts_per_pg = 5
|
|
cls.nr_of_vrfs = 5
|
|
cls.pg_ifs_per_vrf = 3
|
|
|
|
try:
|
|
# Create pg interfaces
|
|
cls.create_pg_interfaces(
|
|
range(cls.nr_of_vrfs * cls.pg_ifs_per_vrf))
|
|
|
|
# Packet flows mapping pg0 -> pg1, pg2 etc.
|
|
cls.flows = dict()
|
|
for i in range(len(cls.pg_interfaces)):
|
|
multiplicand = i / cls.pg_ifs_per_vrf
|
|
pg_list = [
|
|
cls.pg_interfaces[multiplicand * cls.pg_ifs_per_vrf + j]
|
|
for j in range(cls.pg_ifs_per_vrf)
|
|
if (multiplicand * cls.pg_ifs_per_vrf + j) != i]
|
|
cls.flows[cls.pg_interfaces[i]] = pg_list
|
|
|
|
# Packet sizes - jumbo packet (9018 bytes) skipped
|
|
cls.pg_if_packet_sizes = [64, 512, 1518]
|
|
|
|
# Set up all interfaces
|
|
for pg_if in cls.pg_interfaces:
|
|
pg_if.admin_up()
|
|
pg_if.generate_remote_hosts(cls.hosts_per_pg)
|
|
|
|
# Create list of VRFs
|
|
cls.vrf_list = list()
|
|
|
|
# Create list of reset VRFs
|
|
cls.vrf_reset_list = list()
|
|
|
|
# Create list of pg_interfaces in VRFs
|
|
cls.pg_in_vrf = list()
|
|
|
|
# Create list of pg_interfaces not in VRFs
|
|
cls.pg_not_in_vrf = [pg_if for pg_if in cls.pg_interfaces]
|
|
|
|
# Create mapping of pg_interfaces to VRF IDs
|
|
cls.pg_if_by_vrf_id = dict()
|
|
for i in range(cls.nr_of_vrfs):
|
|
vrf_id = i + 1
|
|
pg_list = [
|
|
cls.pg_interfaces[i * cls.pg_ifs_per_vrf + j]
|
|
for j in range(cls.pg_ifs_per_vrf)]
|
|
cls.pg_if_by_vrf_id[vrf_id] = pg_list
|
|
|
|
except Exception:
|
|
super(TestIP6VrfMultiInst, cls).tearDownClass()
|
|
raise
|
|
|
|
@classmethod
|
|
def tearDownClass(cls):
|
|
super(TestIP6VrfMultiInst, cls).tearDownClass()
|
|
|
|
def setUp(self):
|
|
"""
|
|
Clear trace and packet infos before running each test.
|
|
"""
|
|
super(TestIP6VrfMultiInst, self).setUp()
|
|
self.reset_packet_infos()
|
|
|
|
def tearDown(self):
|
|
"""
|
|
Show various debug prints after each test.
|
|
"""
|
|
super(TestIP6VrfMultiInst, self).tearDown()
|
|
|
|
def show_commands_at_teardown(self):
|
|
self.logger.info(self.vapi.ppcli("show ip6 fib"))
|
|
self.logger.info(self.vapi.ppcli("show ip6 neighbors"))
|
|
|
|
def create_vrf_and_assign_interfaces(self, count, start=1):
|
|
"""
|
|
Create required number of FIB tables / VRFs, put 3 pg-ip6 interfaces
|
|
to every FIB table / VRF.
|
|
|
|
:param int count: Number of FIB tables / VRFs to be created.
|
|
:param int start: Starting number of the FIB table / VRF ID. \
|
|
(Default value = 1)
|
|
"""
|
|
for i in range(count):
|
|
vrf_id = i + start
|
|
pg_if = self.pg_if_by_vrf_id[vrf_id][0]
|
|
dest_addr = pg_if.local_ip6n
|
|
dest_addr_len = 64
|
|
self.vapi.ip_table_add_del(is_ipv6=1, is_add=1, table_id=vrf_id)
|
|
self.logger.info("IPv6 VRF ID %d created" % vrf_id)
|
|
if vrf_id not in self.vrf_list:
|
|
self.vrf_list.append(vrf_id)
|
|
if vrf_id in self.vrf_reset_list:
|
|
self.vrf_reset_list.remove(vrf_id)
|
|
for j in range(self.pg_ifs_per_vrf):
|
|
pg_if = self.pg_if_by_vrf_id[vrf_id][j]
|
|
pg_if.set_table_ip6(vrf_id)
|
|
self.logger.info("pg-interface %s added to IPv6 VRF ID %d"
|
|
% (pg_if.name, vrf_id))
|
|
if pg_if not in self.pg_in_vrf:
|
|
self.pg_in_vrf.append(pg_if)
|
|
if pg_if in self.pg_not_in_vrf:
|
|
self.pg_not_in_vrf.remove(pg_if)
|
|
pg_if.config_ip6()
|
|
pg_if.disable_ipv6_ra()
|
|
pg_if.configure_ipv6_neighbors()
|
|
self.logger.debug(self.vapi.ppcli("show ip6 fib"))
|
|
self.logger.debug(self.vapi.ppcli("show ip6 neighbors"))
|
|
|
|
def reset_vrf_and_remove_from_vrf_list(self, vrf_id):
|
|
"""
|
|
Reset required FIB table / VRF and remove it from VRF list.
|
|
|
|
:param int vrf_id: The FIB table / VRF ID to be reset.
|
|
"""
|
|
# self.vapi.reset_vrf(vrf_id, is_ipv6=1)
|
|
self.vapi.reset_fib(vrf_id, is_ipv6=1)
|
|
if vrf_id in self.vrf_list:
|
|
self.vrf_list.remove(vrf_id)
|
|
if vrf_id not in self.vrf_reset_list:
|
|
self.vrf_reset_list.append(vrf_id)
|
|
for j in range(self.pg_ifs_per_vrf):
|
|
pg_if = self.pg_if_by_vrf_id[vrf_id][j]
|
|
pg_if.unconfig_ip6()
|
|
if pg_if in self.pg_in_vrf:
|
|
self.pg_in_vrf.remove(pg_if)
|
|
if pg_if not in self.pg_not_in_vrf:
|
|
self.pg_not_in_vrf.append(pg_if)
|
|
self.logger.info("IPv6 VRF ID %d reset finished" % vrf_id)
|
|
self.logger.debug(self.vapi.ppcli("show ip6 fib"))
|
|
self.logger.debug(self.vapi.ppcli("show ip6 neighbors"))
|
|
self.vapi.ip_table_add_del(is_ipv6=1, is_add=0, table_id=vrf_id)
|
|
|
|
def create_stream(self, src_if, packet_sizes):
|
|
"""
|
|
Create input packet stream for defined interface using hosts list.
|
|
|
|
:param object src_if: Interface to create packet stream for.
|
|
:param list packet_sizes: List of required packet sizes.
|
|
:return: Stream of packets.
|
|
"""
|
|
pkts = []
|
|
src_hosts = src_if.remote_hosts
|
|
for dst_if in self.flows[src_if]:
|
|
for dst_host in dst_if.remote_hosts:
|
|
src_host = random.choice(src_hosts)
|
|
pkt_info = self.create_packet_info(src_if, dst_if)
|
|
payload = self.info_to_payload(pkt_info)
|
|
p = (Ether(dst=src_if.local_mac, src=src_host.mac) /
|
|
IPv6(src=src_host.ip6, dst=dst_host.ip6) /
|
|
UDP(sport=1234, dport=1234) /
|
|
Raw(payload))
|
|
pkt_info.data = p.copy()
|
|
size = random.choice(packet_sizes)
|
|
self.extend_packet(p, size)
|
|
pkts.append(p)
|
|
self.logger.debug("Input stream created for port %s. Length: %u pkt(s)"
|
|
% (src_if.name, len(pkts)))
|
|
return pkts
|
|
|
|
def create_stream_crosswise_vrf(self, src_if, vrf_id, packet_sizes):
|
|
"""
|
|
Create input packet stream for negative test for leaking across
|
|
different VRFs for defined interface using hosts list.
|
|
|
|
:param object src_if: Interface to create packet stream for.
|
|
:param int vrf_id: The FIB table / VRF ID where src_if is assigned.
|
|
:param list packet_sizes: List of required packet sizes.
|
|
:return: Stream of packets.
|
|
"""
|
|
pkts = []
|
|
src_hosts = src_if.remote_hosts
|
|
vrf_lst = list(self.vrf_list)
|
|
vrf_lst.remove(vrf_id)
|
|
for vrf in vrf_lst:
|
|
for dst_if in self.pg_if_by_vrf_id[vrf]:
|
|
for dst_host in dst_if.remote_hosts:
|
|
src_host = random.choice(src_hosts)
|
|
pkt_info = self.create_packet_info(src_if, dst_if)
|
|
payload = self.info_to_payload(pkt_info)
|
|
p = (Ether(dst=src_if.local_mac, src=src_host.mac) /
|
|
IPv6(src=src_host.ip6, dst=dst_host.ip6) /
|
|
UDP(sport=1234, dport=1234) /
|
|
Raw(payload))
|
|
pkt_info.data = p.copy()
|
|
size = random.choice(packet_sizes)
|
|
self.extend_packet(p, size)
|
|
pkts.append(p)
|
|
self.logger.debug("Input stream created for port %s. Length: %u pkt(s)"
|
|
% (src_if.name, len(pkts)))
|
|
return pkts
|
|
|
|
def verify_capture(self, pg_if, capture):
|
|
"""
|
|
Verify captured input packet stream for defined interface.
|
|
|
|
:param object pg_if: Interface to verify captured packet stream for.
|
|
:param list capture: Captured packet stream.
|
|
"""
|
|
last_info = dict()
|
|
for i in self.pg_interfaces:
|
|
last_info[i.sw_if_index] = None
|
|
dst_sw_if_index = pg_if.sw_if_index
|
|
for packet in capture:
|
|
try:
|
|
ip = packet[IPv6]
|
|
udp = packet[UDP]
|
|
payload_info = self.payload_to_info(packet[Raw])
|
|
packet_index = payload_info.index
|
|
self.assertEqual(payload_info.dst, dst_sw_if_index)
|
|
self.logger.debug("Got packet on port %s: src=%u (id=%u)" %
|
|
(pg_if.name, payload_info.src, packet_index))
|
|
next_info = self.get_next_packet_info_for_interface2(
|
|
payload_info.src, dst_sw_if_index,
|
|
last_info[payload_info.src])
|
|
last_info[payload_info.src] = next_info
|
|
self.assertIsNotNone(next_info)
|
|
self.assertEqual(packet_index, next_info.index)
|
|
saved_packet = next_info.data
|
|
# Check standard fields
|
|
self.assertEqual(ip.src, saved_packet[IPv6].src)
|
|
self.assertEqual(ip.dst, saved_packet[IPv6].dst)
|
|
self.assertEqual(udp.sport, saved_packet[UDP].sport)
|
|
self.assertEqual(udp.dport, saved_packet[UDP].dport)
|
|
except:
|
|
self.logger.error(ppp("Unexpected or invalid packet:", packet))
|
|
raise
|
|
for i in self.pg_interfaces:
|
|
remaining_packet = self.get_next_packet_info_for_interface2(
|
|
i, dst_sw_if_index, last_info[i.sw_if_index])
|
|
self.assertIsNone(
|
|
remaining_packet,
|
|
"Port %u: Packet expected from source %u didn't arrive" %
|
|
(dst_sw_if_index, i.sw_if_index))
|
|
|
|
def verify_vrf(self, vrf_id):
|
|
"""
|
|
Check if the FIB table / VRF ID is configured.
|
|
|
|
:param int vrf_id: The FIB table / VRF ID to be verified.
|
|
:return: 1 if the FIB table / VRF ID is configured, otherwise return 0.
|
|
"""
|
|
ip6_fib_dump = self.vapi.ip_route_dump(vrf_id, True)
|
|
vrf_exist = len(ip6_fib_dump)
|
|
vrf_count = 0
|
|
for ip6_fib_details in ip6_fib_dump:
|
|
addr = ip6_fib_details.route.prefix.network_address
|
|
found = False
|
|
for pg_if in self.pg_if_by_vrf_id[vrf_id]:
|
|
if found:
|
|
break
|
|
for host in pg_if.remote_hosts:
|
|
if str(addr) == host.ip6:
|
|
vrf_count += 1
|
|
found = True
|
|
break
|
|
if not vrf_exist and vrf_count == 0:
|
|
self.logger.info("IPv6 VRF ID %d is not configured" % vrf_id)
|
|
return VRFState.not_configured
|
|
elif vrf_exist and vrf_count == 0:
|
|
self.logger.info("IPv6 VRF ID %d has been reset" % vrf_id)
|
|
return VRFState.reset
|
|
else:
|
|
self.logger.info("IPv6 VRF ID %d is configured" % vrf_id)
|
|
return VRFState.configured
|
|
|
|
def run_verify_test(self):
|
|
"""
|
|
Create packet streams for all configured pg interfaces, send all \
|
|
prepared packet streams and verify that:
|
|
- all packets received correctly on all pg-ip6 interfaces assigned
|
|
to VRFs
|
|
- no packet received on all pg-ip6 interfaces not assigned to VRFs
|
|
|
|
:raise RuntimeError: If no packet captured on pg-ip6 interface assigned
|
|
to VRF or if any packet is captured on pg-ip6 interface not
|
|
assigned to VRF.
|
|
"""
|
|
# Test
|
|
# Create incoming packet streams for packet-generator interfaces
|
|
for pg_if in self.pg_interfaces:
|
|
pkts = self.create_stream(pg_if, self.pg_if_packet_sizes)
|
|
pg_if.add_stream(pkts)
|
|
|
|
# Enable packet capture and start packet sending
|
|
self.pg_enable_capture(self.pg_interfaces)
|
|
self.pg_start()
|
|
|
|
# Verify
|
|
# Verify outgoing packet streams per packet-generator interface
|
|
for pg_if in self.pg_interfaces:
|
|
if pg_if in self.pg_in_vrf:
|
|
capture = pg_if.get_capture(remark="interface is in VRF")
|
|
self.verify_capture(pg_if, capture)
|
|
elif pg_if in self.pg_not_in_vrf:
|
|
pg_if.assert_nothing_captured(remark="interface is not in VRF",
|
|
filter_out_fn=is_ipv6_misc_ext)
|
|
self.logger.debug("No capture for interface %s" % pg_if.name)
|
|
else:
|
|
raise Exception("Unknown interface: %s" % pg_if.name)
|
|
|
|
def run_crosswise_vrf_test(self):
|
|
"""
|
|
Create packet streams for every pg-ip6 interface in VRF towards all
|
|
pg-ip6 interfaces in other VRFs, send all prepared packet streams and \
|
|
verify that:
|
|
- no packet received on all configured pg-ip6 interfaces
|
|
|
|
:raise RuntimeError: If any packet is captured on any pg-ip6 interface.
|
|
"""
|
|
# Test
|
|
# Create incoming packet streams for packet-generator interfaces
|
|
for vrf_id in self.vrf_list:
|
|
for pg_if in self.pg_if_by_vrf_id[vrf_id]:
|
|
pkts = self.create_stream_crosswise_vrf(
|
|
pg_if, vrf_id, self.pg_if_packet_sizes)
|
|
pg_if.add_stream(pkts)
|
|
|
|
# Enable packet capture and start packet sending
|
|
self.pg_enable_capture(self.pg_interfaces)
|
|
self.pg_start()
|
|
|
|
# Verify
|
|
# Verify outgoing packet streams per packet-generator interface
|
|
for pg_if in self.pg_interfaces:
|
|
pg_if.assert_nothing_captured(remark="interface is in other VRF",
|
|
filter_out_fn=is_ipv6_misc_ext)
|
|
self.logger.debug("No capture for interface %s" % pg_if.name)
|
|
|
|
def test_ip6_vrf_01(self):
|
|
""" IP6 VRF Multi-instance test 1 - create 4 VRFs
|
|
"""
|
|
# Config 1
|
|
# Create 4 VRFs
|
|
self.create_vrf_and_assign_interfaces(4)
|
|
|
|
# Verify 1
|
|
for vrf_id in self.vrf_list:
|
|
self.assert_equal(self.verify_vrf(vrf_id),
|
|
VRFState.configured, VRFState)
|
|
|
|
# Test 1
|
|
self.run_verify_test()
|
|
self.run_crosswise_vrf_test()
|
|
|
|
def test_ip6_vrf_02(self):
|
|
""" IP6 VRF Multi-instance test 2 - reset 2 VRFs
|
|
"""
|
|
# Config 2
|
|
# Delete 2 VRFs
|
|
self.reset_vrf_and_remove_from_vrf_list(1)
|
|
self.reset_vrf_and_remove_from_vrf_list(2)
|
|
|
|
# Verify 2
|
|
for vrf_id in self.vrf_reset_list:
|
|
self.assert_equal(self.verify_vrf(vrf_id),
|
|
VRFState.reset, VRFState)
|
|
for vrf_id in self.vrf_list:
|
|
self.assert_equal(self.verify_vrf(vrf_id),
|
|
VRFState.configured, VRFState)
|
|
|
|
# Test 2
|
|
self.run_verify_test()
|
|
self.run_crosswise_vrf_test()
|
|
|
|
# Reset routes learned from ICMPv6 Neighbor Discovery
|
|
for vrf_id in self.vrf_reset_list:
|
|
self.reset_vrf_and_remove_from_vrf_list(vrf_id)
|
|
|
|
def test_ip6_vrf_03(self):
|
|
""" IP6 VRF Multi-instance 3 - add 2 VRFs
|
|
"""
|
|
# Config 3
|
|
# Add 1 of reset VRFs and 1 new VRF
|
|
self.create_vrf_and_assign_interfaces(1)
|
|
self.create_vrf_and_assign_interfaces(1, start=5)
|
|
|
|
# Verify 3
|
|
for vrf_id in self.vrf_reset_list:
|
|
self.assert_equal(self.verify_vrf(vrf_id),
|
|
VRFState.reset, VRFState)
|
|
for vrf_id in self.vrf_list:
|
|
self.assert_equal(self.verify_vrf(vrf_id),
|
|
VRFState.configured, VRFState)
|
|
|
|
# Test 3
|
|
self.run_verify_test()
|
|
self.run_crosswise_vrf_test()
|
|
|
|
# Reset routes learned from ICMPv6 Neighbor Discovery
|
|
for vrf_id in self.vrf_reset_list:
|
|
self.reset_vrf_and_remove_from_vrf_list(vrf_id)
|
|
|
|
def test_ip6_vrf_04(self):
|
|
""" IP6 VRF Multi-instance test 4 - reset 4 VRFs
|
|
"""
|
|
# Config 4
|
|
# Reset all VRFs (i.e. no VRF except VRF=0 configured)
|
|
for i in range(len(self.vrf_list)):
|
|
self.reset_vrf_and_remove_from_vrf_list(self.vrf_list[0])
|
|
|
|
# Verify 4
|
|
for vrf_id in self.vrf_reset_list:
|
|
self.assert_equal(self.verify_vrf(vrf_id),
|
|
VRFState.reset, VRFState)
|
|
vrf_list_length = len(self.vrf_list)
|
|
self.assertEqual(
|
|
vrf_list_length, 0,
|
|
"List of configured VRFs is not empty: %s != 0" % vrf_list_length)
|
|
|
|
# Test 4
|
|
self.run_verify_test()
|
|
self.run_crosswise_vrf_test()
|
|
|
|
|
|
if __name__ == '__main__':
|
|
unittest.main(testRunner=VppTestRunner)
|