ligang/vpp
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity
vpp/test/test_dhcp.py
Neale Ranns 20a175a184 dhcp: multiple additions 
DHCP additions:
1) DHCPv4 will only relay a message back to the client, if the Option82 information is present. So make this the default.
2) It is no longer possible to select via the API to "insert circuit ID" - since this is now default
3) Remove the version 2 API since it's now the same as version 1.
4) Adding the VSS option is now conditional only on the presence of VSS config (not the 'insert' option in the set API)
5) DHCP proxy dump via API

Change-Id: Ia7271ba8c1d4dbf34a02c401d268ccfbb1b74f17
Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-02-21 22:25:48 +00:00

726 lines
27 KiB
Python
Raw Blame History

#!/usr/bin/env python
import unittest
import socket
from framework import VppTestCase, VppTestRunner
from scapy.layers.l2 import Ether, getmacbyip
from scapy.layers.inet import IP, UDP, ICMP
from scapy.layers.inet6 import IPv6, in6_getnsmac, in6_mactoifaceid
from scapy.layers.dhcp import DHCP, BOOTP, DHCPTypes
from scapy.layers.dhcp6 import DHCP6, DHCP6_Solicit, DHCP6_RelayForward, \
DHCP6_RelayReply, DHCP6_Advertise, DHCP6OptRelayMsg, DHCP6OptIfaceId, \
DHCP6OptStatusCode, DHCP6OptVSS, DHCP6OptClientLinkLayerAddr
from socket import AF_INET, AF_INET6
from scapy.utils import inet_pton, inet_ntop
from scapy.utils6 import in6_ptop
DHCP4_CLIENT_PORT = 68
DHCP4_SERVER_PORT = 67
DHCP6_CLIENT_PORT = 547
DHCP6_SERVER_PORT = 546
def mk_ll_addr(mac):
euid = in6_mactoifaceid(mac)
addr = "fe80::" + euid
return addr
class TestDHCP(VppTestCase):
""" DHCP Test Case """
def setUp(self):
super(TestDHCP, self).setUp()
# create 3 pg interfaces
self.create_pg_interfaces(range(4))
# pg0 and 1 are IP configured in VRF 0 and 1.
# pg2 and 3 are non IP-configured in VRF 0 and 1
table_id = 0
for i in self.pg_interfaces[:2]:
i.admin_up()
i.set_table_ip4(table_id)
i.set_table_ip6(table_id)
i.config_ip4()
i.resolve_arp()
i.config_ip6()
i.resolve_ndp()
table_id += 1
table_id = 0
for i in self.pg_interfaces[2:]:
i.admin_up()
i.set_table_ip4(table_id)
i.set_table_ip6(table_id)
table_id += 1
def send_and_assert_no_replies(self, intf, pkts, remark):
intf.add_stream(pkts)
self.pg_enable_capture(self.pg_interfaces)
self.pg_start()
for i in self.pg_interfaces:
i.assert_nothing_captured(remark=remark)
def validate_relay_options(self, pkt, intf, ip_addr, fib_id, oui):
dhcp = pkt[DHCP]
found = 0
data = []
for i in dhcp.options:
if type(i) is tuple:
if i[0] == "relay_agent_Information":
#
# There are two sb-options present - each of length 6.
#
data = i[1]
if oui != 0:
self.assertEqual(len(data), 24)
else:
self.assertEqual(len(data), 12)
#
# First sub-option is ID 1, len 4, then encoded
# sw_if_index. This test uses low valued indicies
# so [2:4] are 0.
# The ID space is VPP internal - so no matching value
# scapy
#
self.assertEqual(ord(data[0]), 1)
self.assertEqual(ord(data[1]), 4)
self.assertEqual(ord(data[2]), 0)
self.assertEqual(ord(data[3]), 0)
self.assertEqual(ord(data[4]), 0)
self.assertEqual(ord(data[5]), intf._sw_if_index)
#
# next sub-option is the IP address of the client side
# interface.
# sub-option ID=5, length (of a v4 address)=4
#
claddr = socket.inet_pton(AF_INET, ip_addr)
self.assertEqual(ord(data[6]), 5)
self.assertEqual(ord(data[7]), 4)
self.assertEqual(data[8], claddr[0])
self.assertEqual(data[9], claddr[1])
self.assertEqual(data[10], claddr[2])
self.assertEqual(data[11], claddr[3])
if oui != 0:
# sub-option 151 encodes the 3 byte oui
# and the 4 byte fib_id
self.assertEqual(ord(data[12]), 151)
self.assertEqual(ord(data[13]), 8)
self.assertEqual(ord(data[14]), 1)
self.assertEqual(ord(data[15]), 0)
self.assertEqual(ord(data[16]), 0)
self.assertEqual(ord(data[17]), oui)
self.assertEqual(ord(data[18]), 0)
self.assertEqual(ord(data[19]), 0)
self.assertEqual(ord(data[20]), 0)
self.assertEqual(ord(data[21]), fib_id)
# VSS control sub-option
self.assertEqual(ord(data[22]), 152)
self.assertEqual(ord(data[23]), 0)
found = 1
self.assertTrue(found)
return data
def verify_dhcp_offer(self, pkt, intf):
ether = pkt[Ether]
self.assertEqual(ether.dst, "ff:ff:ff:ff:ff:ff")
self.assertEqual(ether.src, intf.local_mac)
ip = pkt[IP]
self.assertEqual(ip.dst, "255.255.255.255")
self.assertEqual(ip.src, intf.local_ip4)
udp = pkt[UDP]
self.assertEqual(udp.dport, DHCP4_CLIENT_PORT)
self.assertEqual(udp.sport, DHCP4_SERVER_PORT)
dhcp = pkt[DHCP]
is_offer = False
for o in dhcp.options:
if type(o) is tuple:
if o[0] == "message-type" \
and DHCPTypes[o[1]] == "offer":
is_offer = True
self.assertTrue(is_offer)
data = self.validate_relay_options(pkt, intf, intf.local_ip4, 0, 0)
def verify_dhcp_discover(self, pkt, intf, src_intf=None, fib_id=0, oui=0):
ether = pkt[Ether]
self.assertEqual(ether.dst, intf.remote_mac)
self.assertEqual(ether.src, intf.local_mac)
ip = pkt[IP]
self.assertEqual(ip.dst, intf.remote_ip4)
self.assertEqual(ip.src, intf.local_ip4)
udp = pkt[UDP]
self.assertEqual(udp.dport, DHCP4_SERVER_PORT)
self.assertEqual(udp.sport, DHCP4_CLIENT_PORT)
dhcp = pkt[DHCP]
is_discover = False
for o in dhcp.options:
if type(o) is tuple:
if o[0] == "message-type" \
and DHCPTypes[o[1]] == "discover":
is_discover = True
self.assertTrue(is_discover)
data = self.validate_relay_options(pkt, src_intf,
src_intf.local_ip4,
fib_id, oui)
return data
def verify_dhcp6_solicit(self, pkt, intf,
peer_ip, peer_mac,
fib_id=0,
oui=0):
ether = pkt[Ether]
self.assertEqual(ether.dst, intf.remote_mac)
self.assertEqual(ether.src, intf.local_mac)
ip = pkt[IPv6]
self.assertEqual(in6_ptop(ip.dst), in6_ptop(intf.remote_ip6))
self.assertEqual(in6_ptop(ip.src), in6_ptop(intf.local_ip6))
udp = pkt[UDP]
self.assertEqual(udp.dport, DHCP6_CLIENT_PORT)
self.assertEqual(udp.sport, DHCP6_SERVER_PORT)
relay = pkt[DHCP6_RelayForward]
self.assertEqual(in6_ptop(relay.peeraddr), in6_ptop(peer_ip))
oid = pkt[DHCP6OptIfaceId]
cll = pkt[DHCP6OptClientLinkLayerAddr]
self.assertEqual(cll.optlen, 8)
self.assertEqual(cll.lltype, 1)
self.assertEqual(cll.clladdr, peer_mac)
if fib_id != 0:
vss = pkt[DHCP6OptVSS]
self.assertEqual(vss.optlen, 8)
self.assertEqual(vss.type, 1)
# the OUI and FIB-id are really 3 and 4 bytes resp.
# but the tested range is small
self.assertEqual(ord(vss.data[0]), 0)
self.assertEqual(ord(vss.data[1]), 0)
self.assertEqual(ord(vss.data[2]), oui)
self.assertEqual(ord(vss.data[3]), 0)
self.assertEqual(ord(vss.data[4]), 0)
self.assertEqual(ord(vss.data[5]), 0)
self.assertEqual(ord(vss.data[6]), fib_id)
# the relay message should be an encoded Solicit
msg = pkt[DHCP6OptRelayMsg]
sol = DHCP6_Solicit()
self.assertEqual(msg.optlen, len(str(sol)))
self.assertEqual(str(sol), (str(msg[1]))[:msg.optlen])
def verify_dhcp6_advert(self, pkt, intf, peer):
ether = pkt[Ether]
self.assertEqual(ether.dst, "ff:ff:ff:ff:ff:ff")
self.assertEqual(ether.src, intf.local_mac)
ip = pkt[IPv6]
self.assertEqual(in6_ptop(ip.dst), in6_ptop(peer))
self.assertEqual(in6_ptop(ip.src), in6_ptop(intf.local_ip6))
udp = pkt[UDP]
self.assertEqual(udp.dport, DHCP6_SERVER_PORT)
self.assertEqual(udp.sport, DHCP6_CLIENT_PORT)
# not sure why this is not decoding
# adv = pkt[DHCP6_Advertise]
def test_dhcp_proxy(self):
""" DHCPv4 Proxy """
#
# Verify no response to DHCP request without DHCP config
#
p_disc_vrf0 = (Ether(dst="ff:ff:ff:ff:ff:ff",
src=self.pg2.remote_mac) /
IP(src="0.0.0.0", dst="255.255.255.255") /
UDP(sport=DHCP4_CLIENT_PORT,
dport=DHCP4_SERVER_PORT) /
BOOTP(op=1) /
DHCP(options=[('message-type', 'discover'), ('end')]))
pkts_disc_vrf0 = [p_disc_vrf0]
p_disc_vrf1 = (Ether(dst="ff:ff:ff:ff:ff:ff",
src=self.pg3.remote_mac) /
IP(src="0.0.0.0", dst="255.255.255.255") /
UDP(sport=DHCP4_CLIENT_PORT,
dport=DHCP4_SERVER_PORT) /
BOOTP(op=1) /
DHCP(options=[('message-type', 'discover'), ('end')]))
pkts_disc_vrf1 = [p_disc_vrf0]
self.send_and_assert_no_replies(self.pg2, pkts_disc_vrf0,
"DHCP with no configuration")
self.send_and_assert_no_replies(self.pg3, pkts_disc_vrf1,
"DHCP with no configuration")
#
# Enable DHCP proxy in VRF 0
#
server_addr = self.pg0.remote_ip4n
src_addr = self.pg0.local_ip4n
self.vapi.dhcp_proxy_config(server_addr,
src_addr,
rx_table_id=0)
#
# Discover packets from the client are dropped because there is no
# IP address configured on the client facing interface
#
self.send_and_assert_no_replies(self.pg2, pkts_disc_vrf0,
"Discover DHCP no relay address")
#
# Inject a response from the server
# dropped, because there is no IP addrees on the
# clinet interfce to fill in the option.
#
p = (Ether(dst=self.pg0.local_mac, src=self.pg0.remote_mac) /
IP(src=self.pg0.remote_ip4, dst=self.pg0.local_ip4) /
UDP(sport=DHCP4_SERVER_PORT, dport=DHCP4_SERVER_PORT) /
BOOTP(op=1) /
DHCP(options=[('message-type', 'offer'), ('end')]))
pkts = [p]
self.send_and_assert_no_replies(self.pg2, pkts,
"Offer DHCP no relay address")
#
# configure an IP address on the client facing interface
#
self.pg2.config_ip4()
#
# Try again with a discover packet
# Rx'd packet should be to the server address and from the configured
# source address
# UDP source ports are unchanged
# we've no option 82 config so that should be absent
#
self.pg2.add_stream(pkts_disc_vrf0)
self.pg_enable_capture(self.pg_interfaces)
self.pg_start()
rx = self.pg0.get_capture(1)
rx = rx[0]
option_82 = self.verify_dhcp_discover(rx, self.pg0, src_intf=self.pg2)
#
# Create an DHCP offer reply from the server with a correctly formatted
# option 82. i.e. send back what we just captured
# The offer, sent mcast to the client, still has option 82.
#
p = (Ether(dst=self.pg0.local_mac, src=self.pg0.remote_mac) /
IP(src=self.pg0.remote_ip4, dst=self.pg0.local_ip4) /
UDP(sport=DHCP4_SERVER_PORT, dport=DHCP4_SERVER_PORT) /
BOOTP(op=1) /
DHCP(options=[('message-type', 'offer'),
('relay_agent_Information', option_82),
('end')]))
pkts = [p]
self.pg0.add_stream(pkts)
self.pg_enable_capture(self.pg_interfaces)
self.pg_start()
rx = self.pg2.get_capture(1)
rx = rx[0]
self.verify_dhcp_offer(rx, self.pg2)
#
# Bogus Option 82:
#
# 1. not our IP address = not checked by VPP? so offer is replayed
# to client
bad_ip = option_82[0:8] + chr(33) + option_82[9:]
p = (Ether(dst=self.pg0.local_mac, src=self.pg0.remote_mac) /
IP(src=self.pg0.remote_ip4, dst=self.pg0.local_ip4) /
UDP(sport=DHCP4_SERVER_PORT, dport=DHCP4_SERVER_PORT) /
BOOTP(op=1) /
DHCP(options=[('message-type', 'offer'),
('relay_agent_Information', bad_ip),
('end')]))
pkts = [p]
self.send_and_assert_no_replies(self.pg0, pkts,
"DHCP offer option 82 bad address")
# 2. Not a sw_if_index VPP knows
bad_if_index = option_82[0:2] + chr(33) + option_82[3:]
p = (Ether(dst=self.pg0.local_mac, src=self.pg0.remote_mac) /
IP(src=self.pg0.remote_ip4, dst=self.pg0.local_ip4) /
UDP(sport=DHCP4_SERVER_PORT, dport=DHCP4_SERVER_PORT) /
BOOTP(op=1) /
DHCP(options=[('message-type', 'offer'),
('relay_agent_Information', bad_if_index),
('end')]))
pkts = [p]
self.send_and_assert_no_replies(self.pg0, pkts,
"DHCP offer option 82 bad if index")
#
# Send a DHCP request in VRF 1. should be dropped.
#
self.send_and_assert_no_replies(self.pg3, pkts_disc_vrf1,
"DHCP with no configuration VRF 1")
#
# Delete the DHCP config in VRF 0
# Should now drop requests.
#
self.vapi.dhcp_proxy_config(server_addr,
src_addr,
rx_table_id=0,
is_add=0)
self.send_and_assert_no_replies(self.pg2, pkts_disc_vrf0,
"DHCP config removed VRF 0")
self.send_and_assert_no_replies(self.pg3, pkts_disc_vrf1,
"DHCP config removed VRF 1")
#
# Add DHCP config for VRF 1
#
server_addr = self.pg1.remote_ip4n
src_addr = self.pg1.local_ip4n
self.vapi.dhcp_proxy_config(server_addr,
src_addr,
rx_table_id=1,
server_table_id=1)
#
# Confim DHCP requests ok in VRF 1.
# - dropped on IP config on client interface
#
self.send_and_assert_no_replies(self.pg3, pkts_disc_vrf1,
"DHCP config removed VRF 1")
#
# configure an IP address on the client facing interface
#
self.pg3.config_ip4()
self.pg3.add_stream(pkts_disc_vrf1)
self.pg_enable_capture(self.pg_interfaces)
self.pg_start()
rx = self.pg1.get_capture(1)
rx = rx[0]
self.verify_dhcp_discover(rx, self.pg1, src_intf=self.pg3)
#
# Add VSS config
# table=1, fib=id=1, oui=4
self.vapi.dhcp_proxy_set_vss(1, 1, 4)
self.pg3.add_stream(pkts_disc_vrf1)
self.pg_enable_capture(self.pg_interfaces)
self.pg_start()
rx = self.pg1.get_capture(1)
rx = rx[0]
self.verify_dhcp_discover(rx, self.pg1, src_intf=self.pg3,
fib_id=1, oui=4)
#
# Remove the VSS config
# relayed DHCP has default vlaues in the option.
#
self.vapi.dhcp_proxy_set_vss(1, 1, 4, is_add=0)
self.pg3.add_stream(pkts_disc_vrf1)
self.pg_enable_capture(self.pg_interfaces)
self.pg_start()
rx = self.pg1.get_capture(1)
rx = rx[0]
self.verify_dhcp_discover(rx, self.pg1, src_intf=self.pg3)
#
# remove DHCP config to cleanup
#
self.vapi.dhcp_proxy_config(server_addr,
src_addr,
rx_table_id=1,
server_table_id=11,
is_add=0)
self.send_and_assert_no_replies(self.pg2, pkts_disc_vrf0,
"DHCP cleanup VRF 0")
self.send_and_assert_no_replies(self.pg3, pkts_disc_vrf1,
"DHCP cleanup VRF 1")
def test_dhcp6_proxy(self):
""" DHCPv6 Proxy"""
#
# Verify no response to DHCP request without DHCP config
#
dhcp_solicit_dst = "ff02::1:2"
dhcp_solicit_src_vrf0 = mk_ll_addr(self.pg2.remote_mac)
dhcp_solicit_src_vrf1 = mk_ll_addr(self.pg3.remote_mac)
server_addr_vrf0 = self.pg0.remote_ip6n
src_addr_vrf0 = self.pg0.local_ip6n
server_addr_vrf1 = self.pg1.remote_ip6n
src_addr_vrf1 = self.pg1.local_ip6n
dmac = in6_getnsmac(inet_pton(socket.AF_INET6, dhcp_solicit_dst))
p_solicit_vrf0 = (Ether(dst=dmac, src=self.pg2.remote_mac) /
IPv6(src=dhcp_solicit_src_vrf0,
dst=dhcp_solicit_dst) /
UDP(sport=DHCP6_SERVER_PORT,
dport=DHCP6_CLIENT_PORT) /
DHCP6_Solicit())
pkts_solicit_vrf0 = [p_solicit_vrf0]
p_solicit_vrf1 = (Ether(dst=dmac, src=self.pg3.remote_mac) /
IPv6(src=dhcp_solicit_src_vrf1,
dst=dhcp_solicit_dst) /
UDP(sport=DHCP6_SERVER_PORT,
dport=DHCP6_CLIENT_PORT) /
DHCP6_Solicit())
pkts_solicit_vrf1 = [p_solicit_vrf1]
self.send_and_assert_no_replies(self.pg2, pkts_solicit_vrf0,
"DHCP with no configuration")
self.send_and_assert_no_replies(self.pg3, pkts_solicit_vrf1,
"DHCP with no configuration")
#
# DHCPv6 config in VRF 0.
# Packets still dropped because the client facing interface has no
# IPv6 config
#
self.vapi.dhcp_proxy_config(server_addr_vrf0,
src_addr_vrf0,
rx_table_id=0,
server_table_id=0,
is_ipv6=1)
self.send_and_assert_no_replies(self.pg2, pkts_solicit_vrf0,
"DHCP with no configuration")
self.send_and_assert_no_replies(self.pg3, pkts_solicit_vrf1,
"DHCP with no configuration")
#
# configure an IP address on the client facing interface
#
self.pg2.config_ip6()
#
# Now the DHCP requests are relayed to the server
#
self.pg2.add_stream(pkts_solicit_vrf0)
self.pg_enable_capture(self.pg_interfaces)
self.pg_start()
rx = self.pg0.get_capture(1)
rx = rx[0]
self.verify_dhcp6_solicit(rx, self.pg0,
dhcp_solicit_src_vrf0,
self.pg2.remote_mac)
#
# Exception cases for rejected relay responses
#
# 1 - not a relay reply
p_adv_vrf0 = (Ether(dst=self.pg0.local_mac, src=self.pg0.remote_mac) /
IPv6(dst=self.pg0.local_ip6, src=self.pg0.remote_ip6) /
UDP(sport=DHCP6_SERVER_PORT, dport=DHCP6_SERVER_PORT) /
DHCP6_Advertise())
pkts_adv_vrf0 = [p_adv_vrf0]
self.send_and_assert_no_replies(self.pg2, pkts_adv_vrf0,
"DHCP6 not a relay reply")
# 2 - no relay message option
p_adv_vrf0 = (Ether(dst=self.pg0.local_mac, src=self.pg0.remote_mac) /
IPv6(dst=self.pg0.local_ip6, src=self.pg0.remote_ip6) /
UDP(sport=DHCP6_SERVER_PORT, dport=DHCP6_SERVER_PORT) /
DHCP6_RelayReply() /
DHCP6_Advertise())
pkts_adv_vrf0 = [p_adv_vrf0]
self.send_and_assert_no_replies(self.pg2, pkts_adv_vrf0,
"DHCP not a relay message")
# 3 - no circuit ID
p_adv_vrf0 = (Ether(dst=self.pg0.local_mac, src=self.pg0.remote_mac) /
IPv6(dst=self.pg0.local_ip6, src=self.pg0.remote_ip6) /
UDP(sport=DHCP6_SERVER_PORT, dport=DHCP6_SERVER_PORT) /
DHCP6_RelayReply() /
DHCP6OptRelayMsg(optlen=0) /
DHCP6_Advertise())
pkts_adv_vrf0 = [p_adv_vrf0]
self.send_and_assert_no_replies(self.pg2, pkts_adv_vrf0,
"DHCP6 no circuit ID")
# 4 - wrong circuit ID
p_adv_vrf0 = (Ether(dst=self.pg0.local_mac, src=self.pg0.remote_mac) /
IPv6(dst=self.pg0.local_ip6, src=self.pg0.remote_ip6) /
UDP(sport=DHCP6_SERVER_PORT, dport=DHCP6_SERVER_PORT) /
DHCP6_RelayReply() /
DHCP6OptIfaceId(optlen=4, ifaceid='\x00\x00\x00\x05') /
DHCP6OptRelayMsg(optlen=0) /
DHCP6_Advertise())
pkts_adv_vrf0 = [p_adv_vrf0]
self.send_and_assert_no_replies(self.pg2, pkts_adv_vrf0,
"DHCP6 wrong circuit ID")
#
# Send the relay response (the advertisement)
# - no peer address
p_adv_vrf0 = (Ether(dst=self.pg0.local_mac, src=self.pg0.remote_mac) /
IPv6(dst=self.pg0.local_ip6, src=self.pg0.remote_ip6) /
UDP(sport=DHCP6_SERVER_PORT, dport=DHCP6_SERVER_PORT) /
DHCP6_RelayReply() /
DHCP6OptIfaceId(optlen=4, ifaceid='\x00\x00\x00\x03') /
DHCP6OptRelayMsg(optlen=0) /
DHCP6_Advertise(trid=1) /
DHCP6OptStatusCode(statuscode=0))
pkts_adv_vrf0 = [p_adv_vrf0]
self.pg0.add_stream(pkts_adv_vrf0)
self.pg_enable_capture(self.pg_interfaces)
self.pg_start()
rx = self.pg2.get_capture(1)
rx = rx[0]
self.verify_dhcp6_advert(rx, self.pg2, "::")
#
# Send the relay response (the advertisement)
# - with peer address
p_adv_vrf0 = (Ether(dst=self.pg0.local_mac, src=self.pg0.remote_mac) /
IPv6(dst=self.pg0.local_ip6, src=self.pg0.remote_ip6) /
UDP(sport=DHCP6_SERVER_PORT, dport=DHCP6_SERVER_PORT) /
DHCP6_RelayReply(peeraddr=dhcp_solicit_src_vrf0) /
DHCP6OptIfaceId(optlen=4, ifaceid='\x00\x00\x00\x03') /
DHCP6OptRelayMsg(optlen=0) /
DHCP6_Advertise(trid=1) /
DHCP6OptStatusCode(statuscode=0))
pkts_adv_vrf0 = [p_adv_vrf0]
self.pg0.add_stream(pkts_adv_vrf0)
self.pg_enable_capture(self.pg_interfaces)
self.pg_start()
rx = self.pg2.get_capture(1)
rx = rx[0]
self.verify_dhcp6_advert(rx, self.pg2, dhcp_solicit_src_vrf0)
#
# Add all the config for VRF 1
#
self.vapi.dhcp_proxy_config(server_addr_vrf1,
src_addr_vrf1,
rx_table_id=1,
server_table_id=1,
is_ipv6=1)
self.pg3.config_ip6()
#
# VRF 1 solicit
#
self.pg3.add_stream(pkts_solicit_vrf1)
self.pg_enable_capture(self.pg_interfaces)
self.pg_start()
rx = self.pg1.get_capture(1)
rx = rx[0]
self.verify_dhcp6_solicit(rx, self.pg1,
dhcp_solicit_src_vrf1,
self.pg3.remote_mac)
#
# VRF 1 Advert
#
p_adv_vrf1 = (Ether(dst=self.pg1.local_mac, src=self.pg1.remote_mac) /
IPv6(dst=self.pg1.local_ip6, src=self.pg1.remote_ip6) /
UDP(sport=DHCP6_SERVER_PORT, dport=DHCP6_SERVER_PORT) /
DHCP6_RelayReply(peeraddr=dhcp_solicit_src_vrf1) /
DHCP6OptIfaceId(optlen=4, ifaceid='\x00\x00\x00\x04') /
DHCP6OptRelayMsg(optlen=0) /
DHCP6_Advertise(trid=1) /
DHCP6OptStatusCode(statuscode=0))
pkts_adv_vrf1 = [p_adv_vrf1]
self.pg1.add_stream(pkts_adv_vrf1)
self.pg_enable_capture(self.pg_interfaces)
self.pg_start()
rx = self.pg3.get_capture(1)
rx = rx[0]
self.verify_dhcp6_advert(rx, self.pg3, dhcp_solicit_src_vrf1)
#
# Add VSS config
# table=1, fib=id=1, oui=4
self.vapi.dhcp_proxy_set_vss(1, 1, 4, is_ip6=1)
self.pg3.add_stream(pkts_solicit_vrf1)
self.pg_enable_capture(self.pg_interfaces)
self.pg_start()
rx = self.pg1.get_capture(1)
rx = rx[0]
self.verify_dhcp6_solicit(rx, self.pg1,
dhcp_solicit_src_vrf1,
self.pg3.remote_mac,
fib_id=1,
oui=4)
#
# Remove the VSS config
# relayed DHCP has default vlaues in the option.
#
self.vapi.dhcp_proxy_set_vss(1, 1, 4, is_ip6=1, is_add=0)
self.pg3.add_stream(pkts_solicit_vrf1)
self.pg_enable_capture(self.pg_interfaces)
self.pg_start()
rx = self.pg1.get_capture(1)
rx = rx[0]
self.verify_dhcp6_solicit(rx, self.pg1,
dhcp_solicit_src_vrf1,
self.pg3.remote_mac)
#
# Cleanup
#
self.vapi.dhcp_proxy_config(server_addr_vrf1,
src_addr_vrf1,
rx_table_id=1,
server_table_id=1,
is_ipv6=1,
is_add=0)
self.vapi.dhcp_proxy_config(server_addr_vrf1,
src_addr_vrf1,
rx_table_id=0,
server_table_id=0,
is_ipv6=1,
is_add=0)
if __name__ == '__main__':
unittest.main(testRunner=VppTestRunner)
Reference in New Issue View Git Blame Copy Permalink