70591c147d
Currently, L2 flows are exported using L2_IP6 template if L3 or L4 recording is enabled on L2 datapath. That occurs because during feature enable, L2 template is added and its ID is not saved immediately. Then L2_IP4 and L2_IP6 templates are added overwriting "template_id" each time. And in the end, the current value of "template_id" is saved for L2 template. The problem is that "template_id" at that point contains the ID of L2_IP6 template. With this fix, save the template ID immediately after adding a template for all variants (datapaths). Also, cover the case with a test. Type: fix Change-Id: Id27288043b3b8f0e89e77f45ae9a01fa7439e20e Signed-off-by: Alexander Chernavin <achernavin@netgate.com> (cherry picked from commit 120095d3d33bfac64c1f3c870f8a332eeaf638f0)
1360 lines
45 KiB
Python
1360 lines
45 KiB
Python
#!/usr/bin/env python3
|
|
from __future__ import print_function
|
|
import binascii
|
|
import random
|
|
import socket
|
|
import unittest
|
|
import time
|
|
import re
|
|
|
|
from scapy.packet import Raw
|
|
from scapy.layers.l2 import Ether
|
|
from scapy.layers.inet import IP, TCP, UDP
|
|
from scapy.layers.inet6 import IPv6
|
|
from scapy.contrib.lacp import SlowProtocol, LACP
|
|
|
|
from config import config
|
|
from framework import tag_fixme_vpp_workers, tag_fixme_ubuntu2204, tag_fixme_debian11
|
|
from framework import is_distro_ubuntu2204, is_distro_debian11
|
|
from framework import VppTestCase, VppTestRunner
|
|
from framework import tag_run_solo
|
|
from vpp_object import VppObject
|
|
from vpp_pg_interface import CaptureTimeoutError
|
|
from util import ppp
|
|
from ipfix import IPFIX, Set, Template, Data, IPFIXDecoder
|
|
from vpp_ip_route import VppIpRoute, VppRoutePath
|
|
from vpp_papi.macaddress import mac_ntop
|
|
from socket import inet_ntop
|
|
from vpp_papi import VppEnum
|
|
|
|
|
|
class VppCFLOW(VppObject):
|
|
"""CFLOW object for IPFIX exporter and Flowprobe feature"""
|
|
|
|
def __init__(
|
|
self,
|
|
test,
|
|
intf="pg2",
|
|
active=0,
|
|
passive=0,
|
|
timeout=100,
|
|
mtu=1024,
|
|
datapath="l2",
|
|
layer="l2 l3 l4",
|
|
direction="tx",
|
|
):
|
|
self._test = test
|
|
self._intf = intf
|
|
self._intf_obj = getattr(self._test, intf)
|
|
self._active = active
|
|
if passive == 0 or passive < active:
|
|
self._passive = active + 1
|
|
else:
|
|
self._passive = passive
|
|
self._datapath = datapath # l2 ip4 ip6
|
|
self._collect = layer # l2 l3 l4
|
|
self._direction = direction # rx tx both
|
|
self._timeout = timeout
|
|
self._mtu = mtu
|
|
self._configured = False
|
|
|
|
def add_vpp_config(self):
|
|
self.enable_exporter()
|
|
l2_flag = 0
|
|
l3_flag = 0
|
|
l4_flag = 0
|
|
if "l2" in self._collect.lower():
|
|
l2_flag = VppEnum.vl_api_flowprobe_record_flags_t.FLOWPROBE_RECORD_FLAG_L2
|
|
if "l3" in self._collect.lower():
|
|
l3_flag = VppEnum.vl_api_flowprobe_record_flags_t.FLOWPROBE_RECORD_FLAG_L3
|
|
if "l4" in self._collect.lower():
|
|
l4_flag = VppEnum.vl_api_flowprobe_record_flags_t.FLOWPROBE_RECORD_FLAG_L4
|
|
self._test.vapi.flowprobe_set_params(
|
|
record_flags=(l2_flag | l3_flag | l4_flag),
|
|
active_timer=self._active,
|
|
passive_timer=self._passive,
|
|
)
|
|
self.enable_flowprobe_feature()
|
|
self._test.vapi.cli("ipfix flush")
|
|
self._configured = True
|
|
|
|
def remove_vpp_config(self):
|
|
self.disable_exporter()
|
|
self.disable_flowprobe_feature()
|
|
self._test.vapi.cli("ipfix flush")
|
|
self._configured = False
|
|
|
|
def enable_exporter(self):
|
|
self._test.vapi.set_ipfix_exporter(
|
|
collector_address=self._test.pg0.remote_ip4,
|
|
src_address=self._test.pg0.local_ip4,
|
|
path_mtu=self._mtu,
|
|
template_interval=self._timeout,
|
|
)
|
|
|
|
def _enable_disable_flowprobe_feature(self, is_add):
|
|
which_map = {
|
|
"l2": VppEnum.vl_api_flowprobe_which_t.FLOWPROBE_WHICH_L2,
|
|
"ip4": VppEnum.vl_api_flowprobe_which_t.FLOWPROBE_WHICH_IP4,
|
|
"ip6": VppEnum.vl_api_flowprobe_which_t.FLOWPROBE_WHICH_IP6,
|
|
}
|
|
direction_map = {
|
|
"rx": VppEnum.vl_api_flowprobe_direction_t.FLOWPROBE_DIRECTION_RX,
|
|
"tx": VppEnum.vl_api_flowprobe_direction_t.FLOWPROBE_DIRECTION_TX,
|
|
"both": VppEnum.vl_api_flowprobe_direction_t.FLOWPROBE_DIRECTION_BOTH,
|
|
}
|
|
self._test.vapi.flowprobe_interface_add_del(
|
|
is_add=is_add,
|
|
which=which_map[self._datapath],
|
|
direction=direction_map[self._direction],
|
|
sw_if_index=self._intf_obj.sw_if_index,
|
|
)
|
|
|
|
def enable_flowprobe_feature(self):
|
|
self._enable_disable_flowprobe_feature(is_add=True)
|
|
|
|
def disable_exporter(self):
|
|
self._test.vapi.cli("set ipfix exporter collector 0.0.0.0")
|
|
|
|
def disable_flowprobe_feature(self):
|
|
self._enable_disable_flowprobe_feature(is_add=False)
|
|
|
|
def object_id(self):
|
|
return "ipfix-collector-%s-%s" % (self._src, self.dst)
|
|
|
|
def query_vpp_config(self):
|
|
return self._configured
|
|
|
|
def verify_templates(self, decoder=None, timeout=1, count=3):
|
|
templates = []
|
|
self._test.assertIn(count, (1, 2, 3))
|
|
for _ in range(count):
|
|
p = self._test.wait_for_cflow_packet(self._test.collector, 2, timeout)
|
|
self._test.assertTrue(p.haslayer(IPFIX))
|
|
if decoder is not None and p.haslayer(Template):
|
|
templates.append(p[Template].templateID)
|
|
decoder.add_template(p.getlayer(Template))
|
|
return templates
|
|
|
|
|
|
class MethodHolder(VppTestCase):
|
|
"""Flow-per-packet plugin: test L2, IP4, IP6 reporting"""
|
|
|
|
# Test variables
|
|
debug_print = False
|
|
max_number_of_packets = 10
|
|
pkts = []
|
|
|
|
@classmethod
|
|
def setUpClass(cls):
|
|
"""
|
|
Perform standard class setup (defined by class method setUpClass in
|
|
class VppTestCase) before running the test case, set test case related
|
|
variables and configure VPP.
|
|
"""
|
|
super(MethodHolder, cls).setUpClass()
|
|
if (is_distro_ubuntu2204 == True or is_distro_debian11 == True) and not hasattr(
|
|
cls, "vpp"
|
|
):
|
|
return
|
|
try:
|
|
# Create pg interfaces
|
|
cls.create_pg_interfaces(range(9))
|
|
|
|
# Packet sizes
|
|
cls.pg_if_packet_sizes = [64, 512, 1518, 9018]
|
|
|
|
# Create BD with MAC learning and unknown unicast flooding disabled
|
|
# and put interfaces to this BD
|
|
cls.vapi.bridge_domain_add_del_v2(
|
|
bd_id=1, uu_flood=1, learn=1, flood=1, forward=1, is_add=1
|
|
)
|
|
cls.vapi.sw_interface_set_l2_bridge(
|
|
rx_sw_if_index=cls.pg1._sw_if_index, bd_id=1
|
|
)
|
|
cls.vapi.sw_interface_set_l2_bridge(
|
|
rx_sw_if_index=cls.pg2._sw_if_index, bd_id=1
|
|
)
|
|
|
|
# Set up all interfaces
|
|
for i in cls.pg_interfaces:
|
|
i.admin_up()
|
|
|
|
cls.pg0.config_ip4()
|
|
cls.pg0.configure_ipv4_neighbors()
|
|
cls.collector = cls.pg0
|
|
|
|
cls.pg1.config_ip4()
|
|
cls.pg1.resolve_arp()
|
|
cls.pg2.config_ip4()
|
|
cls.pg2.resolve_arp()
|
|
cls.pg3.config_ip4()
|
|
cls.pg3.resolve_arp()
|
|
cls.pg4.config_ip4()
|
|
cls.pg4.resolve_arp()
|
|
cls.pg7.config_ip4()
|
|
cls.pg8.config_ip4()
|
|
cls.pg8.configure_ipv4_neighbors()
|
|
|
|
cls.pg5.config_ip6()
|
|
cls.pg5.resolve_ndp()
|
|
cls.pg5.disable_ipv6_ra()
|
|
cls.pg6.config_ip6()
|
|
cls.pg6.resolve_ndp()
|
|
cls.pg6.disable_ipv6_ra()
|
|
except Exception:
|
|
super(MethodHolder, cls).tearDownClass()
|
|
raise
|
|
|
|
@classmethod
|
|
def tearDownClass(cls):
|
|
super(MethodHolder, cls).tearDownClass()
|
|
|
|
def create_stream(
|
|
self, src_if=None, dst_if=None, packets=None, size=None, ip_ver="v4"
|
|
):
|
|
"""Create a packet stream to tickle the plugin
|
|
|
|
:param VppInterface src_if: Source interface for packet stream
|
|
:param VppInterface src_if: Dst interface for packet stream
|
|
"""
|
|
if src_if is None:
|
|
src_if = self.pg1
|
|
if dst_if is None:
|
|
dst_if = self.pg2
|
|
self.pkts = []
|
|
if packets is None:
|
|
packets = random.randint(1, self.max_number_of_packets)
|
|
pkt_size = size
|
|
for p in range(0, packets):
|
|
if size is None:
|
|
pkt_size = random.choice(self.pg_if_packet_sizes)
|
|
info = self.create_packet_info(src_if, dst_if)
|
|
payload = self.info_to_payload(info)
|
|
p = Ether(src=src_if.remote_mac, dst=src_if.local_mac)
|
|
if ip_ver == "v4":
|
|
p /= IP(src=src_if.remote_ip4, dst=dst_if.remote_ip4)
|
|
else:
|
|
p /= IPv6(src=src_if.remote_ip6, dst=dst_if.remote_ip6)
|
|
p /= UDP(sport=1234, dport=4321)
|
|
p /= Raw(payload)
|
|
info.data = p.copy()
|
|
self.extend_packet(p, pkt_size)
|
|
self.pkts.append(p)
|
|
|
|
def verify_cflow_data(self, decoder, capture, cflow):
|
|
octets = 0
|
|
packets = 0
|
|
for p in capture:
|
|
octets += p[IP].len
|
|
packets += 1
|
|
if cflow.haslayer(Data):
|
|
data = decoder.decode_data_set(cflow.getlayer(Set))
|
|
for record in data:
|
|
self.assertEqual(int(binascii.hexlify(record[1]), 16), octets)
|
|
self.assertEqual(int(binascii.hexlify(record[2]), 16), packets)
|
|
|
|
def send_packets(self, src_if=None, dst_if=None):
|
|
if src_if is None:
|
|
src_if = self.pg1
|
|
if dst_if is None:
|
|
dst_if = self.pg2
|
|
self.pg_enable_capture([dst_if])
|
|
src_if.add_stream(self.pkts)
|
|
self.pg_start()
|
|
return dst_if.get_capture(len(self.pkts))
|
|
|
|
def verify_cflow_data_detail(
|
|
self, decoder, capture, cflow, data_set={1: "octets", 2: "packets"}, ip_ver="v4"
|
|
):
|
|
if self.debug_print:
|
|
print(capture[0].show())
|
|
if cflow.haslayer(Data):
|
|
data = decoder.decode_data_set(cflow.getlayer(Set))
|
|
if self.debug_print:
|
|
print(data)
|
|
if ip_ver == "v4":
|
|
ip_layer = capture[0][IP] if capture[0].haslayer(IP) else None
|
|
else:
|
|
ip_layer = capture[0][IPv6] if capture[0].haslayer(IPv6) else None
|
|
if data_set is not None:
|
|
for record in data:
|
|
# skip flow if ingress/egress interface is 0
|
|
if int(binascii.hexlify(record[10]), 16) == 0:
|
|
continue
|
|
if int(binascii.hexlify(record[14]), 16) == 0:
|
|
continue
|
|
|
|
for field in data_set:
|
|
value = data_set[field]
|
|
if value == "octets":
|
|
value = ip_layer.len
|
|
if ip_ver == "v6":
|
|
value += 40 # ??? is this correct
|
|
elif value == "packets":
|
|
value = 1
|
|
elif value == "src_ip":
|
|
if ip_ver == "v4":
|
|
ip = socket.inet_pton(socket.AF_INET, ip_layer.src)
|
|
else:
|
|
ip = socket.inet_pton(socket.AF_INET6, ip_layer.src)
|
|
value = int(binascii.hexlify(ip), 16)
|
|
elif value == "dst_ip":
|
|
if ip_ver == "v4":
|
|
ip = socket.inet_pton(socket.AF_INET, ip_layer.dst)
|
|
else:
|
|
ip = socket.inet_pton(socket.AF_INET6, ip_layer.dst)
|
|
value = int(binascii.hexlify(ip), 16)
|
|
elif value == "sport":
|
|
value = int(capture[0][UDP].sport)
|
|
elif value == "dport":
|
|
value = int(capture[0][UDP].dport)
|
|
self.assertEqual(
|
|
int(binascii.hexlify(record[field]), 16), value
|
|
)
|
|
|
|
def verify_cflow_data_notimer(self, decoder, capture, cflows):
|
|
idx = 0
|
|
for cflow in cflows:
|
|
if cflow.haslayer(Data):
|
|
data = decoder.decode_data_set(cflow.getlayer(Set))
|
|
else:
|
|
raise Exception("No CFLOW data")
|
|
|
|
for rec in data:
|
|
p = capture[idx]
|
|
idx += 1
|
|
self.assertEqual(p[IP].len, int(binascii.hexlify(rec[1]), 16))
|
|
self.assertEqual(1, int(binascii.hexlify(rec[2]), 16))
|
|
self.assertEqual(len(capture), idx)
|
|
|
|
def wait_for_cflow_packet(self, collector_intf, set_id=2, timeout=1):
|
|
"""wait for CFLOW packet and verify its correctness
|
|
|
|
:param timeout: how long to wait
|
|
|
|
"""
|
|
self.logger.info("IPFIX: Waiting for CFLOW packet")
|
|
# self.logger.debug(self.vapi.ppcli("show flow table"))
|
|
p = collector_intf.wait_for_packet(timeout=timeout)
|
|
self.assertEqual(p[Set].setID, set_id)
|
|
# self.logger.debug(self.vapi.ppcli("show flow table"))
|
|
self.logger.debug(ppp("IPFIX: Got packet:", p))
|
|
return p
|
|
|
|
|
|
@tag_run_solo
|
|
@tag_fixme_vpp_workers
|
|
@tag_fixme_ubuntu2204
|
|
@tag_fixme_debian11
|
|
class Flowprobe(MethodHolder):
|
|
"""Template verification, timer tests"""
|
|
|
|
@classmethod
|
|
def setUpClass(cls):
|
|
super(Flowprobe, cls).setUpClass()
|
|
|
|
@classmethod
|
|
def tearDownClass(cls):
|
|
super(Flowprobe, cls).tearDownClass()
|
|
|
|
def test_0001(self):
|
|
"""timer less than template timeout"""
|
|
self.logger.info("FFP_TEST_START_0001")
|
|
self.pg_enable_capture(self.pg_interfaces)
|
|
self.pkts = []
|
|
|
|
ipfix = VppCFLOW(test=self, active=2)
|
|
ipfix.add_vpp_config()
|
|
|
|
ipfix_decoder = IPFIXDecoder()
|
|
# template packet should arrive immediately
|
|
templates = ipfix.verify_templates(ipfix_decoder)
|
|
|
|
self.create_stream(packets=1)
|
|
self.send_packets()
|
|
capture = self.pg2.get_capture(1)
|
|
|
|
# make sure the one packet we expect actually showed up
|
|
cflow = self.wait_for_cflow_packet(self.collector, templates[1], 15)
|
|
self.verify_cflow_data(ipfix_decoder, capture, cflow)
|
|
|
|
ipfix.remove_vpp_config()
|
|
self.logger.info("FFP_TEST_FINISH_0001")
|
|
|
|
def test_0002(self):
|
|
"""timer greater than template timeout"""
|
|
self.logger.info("FFP_TEST_START_0002")
|
|
self.pg_enable_capture(self.pg_interfaces)
|
|
self.pkts = []
|
|
|
|
ipfix = VppCFLOW(test=self, timeout=3, active=4)
|
|
ipfix.add_vpp_config()
|
|
|
|
ipfix_decoder = IPFIXDecoder()
|
|
# template packet should arrive immediately
|
|
ipfix.verify_templates()
|
|
|
|
self.create_stream(packets=2)
|
|
self.send_packets()
|
|
capture = self.pg2.get_capture(2)
|
|
|
|
# next set of template packet should arrive after 20 seconds
|
|
# template packet should arrive within 20 s
|
|
templates = ipfix.verify_templates(ipfix_decoder, timeout=5)
|
|
|
|
# make sure the one packet we expect actually showed up
|
|
cflow = self.wait_for_cflow_packet(self.collector, templates[1], 15)
|
|
self.verify_cflow_data(ipfix_decoder, capture, cflow)
|
|
|
|
ipfix.remove_vpp_config()
|
|
self.logger.info("FFP_TEST_FINISH_0002")
|
|
|
|
def test_cflow_packet(self):
|
|
"""verify cflow packet fields"""
|
|
self.logger.info("FFP_TEST_START_0000")
|
|
self.pg_enable_capture(self.pg_interfaces)
|
|
self.pkts = []
|
|
|
|
ipfix = VppCFLOW(
|
|
test=self, intf="pg8", datapath="ip4", layer="l2 l3 l4", active=2
|
|
)
|
|
ipfix.add_vpp_config()
|
|
|
|
route_9001 = VppIpRoute(
|
|
self,
|
|
"9.0.0.0",
|
|
24,
|
|
[VppRoutePath(self.pg8._remote_hosts[0].ip4, self.pg8.sw_if_index)],
|
|
)
|
|
route_9001.add_vpp_config()
|
|
|
|
ipfix_decoder = IPFIXDecoder()
|
|
templates = ipfix.verify_templates(ipfix_decoder, count=1)
|
|
|
|
self.pkts = [
|
|
(
|
|
Ether(dst=self.pg7.local_mac, src=self.pg7.remote_mac)
|
|
/ IP(src=self.pg7.remote_ip4, dst="9.0.0.100")
|
|
/ TCP(sport=1234, dport=4321, flags=80)
|
|
/ Raw(b"\xa5" * 100)
|
|
)
|
|
]
|
|
|
|
nowUTC = int(time.time())
|
|
nowUNIX = nowUTC + 2208988800
|
|
self.send_packets(src_if=self.pg7, dst_if=self.pg8)
|
|
|
|
cflow = self.wait_for_cflow_packet(self.collector, templates[0], 10)
|
|
self.collector.get_capture(2)
|
|
|
|
if cflow[0].haslayer(IPFIX):
|
|
self.assertEqual(cflow[IPFIX].version, 10)
|
|
self.assertEqual(cflow[IPFIX].observationDomainID, 1)
|
|
self.assertEqual(cflow[IPFIX].sequenceNumber, 0)
|
|
self.assertAlmostEqual(cflow[IPFIX].exportTime, nowUTC, delta=5)
|
|
if cflow.haslayer(Data):
|
|
record = ipfix_decoder.decode_data_set(cflow[0].getlayer(Set))[0]
|
|
# ingress interface
|
|
self.assertEqual(int(binascii.hexlify(record[10]), 16), 8)
|
|
# egress interface
|
|
self.assertEqual(int(binascii.hexlify(record[14]), 16), 9)
|
|
# direction
|
|
self.assertEqual(int(binascii.hexlify(record[61]), 16), 1)
|
|
# packets
|
|
self.assertEqual(int(binascii.hexlify(record[2]), 16), 1)
|
|
# src mac
|
|
self.assertEqual(mac_ntop(record[56]), self.pg8.local_mac)
|
|
# dst mac
|
|
self.assertEqual(mac_ntop(record[80]), self.pg8.remote_mac)
|
|
flowTimestamp = int(binascii.hexlify(record[156]), 16) >> 32
|
|
# flow start timestamp
|
|
self.assertAlmostEqual(flowTimestamp, nowUNIX, delta=1)
|
|
flowTimestamp = int(binascii.hexlify(record[157]), 16) >> 32
|
|
# flow end timestamp
|
|
self.assertAlmostEqual(flowTimestamp, nowUNIX, delta=1)
|
|
# ethernet type
|
|
self.assertEqual(int(binascii.hexlify(record[256]), 16), 8)
|
|
# src ip
|
|
self.assertEqual(inet_ntop(socket.AF_INET, record[8]), self.pg7.remote_ip4)
|
|
# dst ip
|
|
self.assertEqual(inet_ntop(socket.AF_INET, record[12]), "9.0.0.100")
|
|
# protocol (TCP)
|
|
self.assertEqual(int(binascii.hexlify(record[4]), 16), 6)
|
|
# src port
|
|
self.assertEqual(int(binascii.hexlify(record[7]), 16), 1234)
|
|
# dst port
|
|
self.assertEqual(int(binascii.hexlify(record[11]), 16), 4321)
|
|
# tcp flags
|
|
self.assertEqual(int(binascii.hexlify(record[6]), 16), 80)
|
|
|
|
ipfix.remove_vpp_config()
|
|
self.logger.info("FFP_TEST_FINISH_0000")
|
|
|
|
def test_interface_dump(self):
|
|
"""Dump interfaces with IPFIX flow record generation enabled"""
|
|
self.logger.info("FFP_TEST_START_0003")
|
|
|
|
# Enable feature for 3 interfaces
|
|
ipfix1 = VppCFLOW(test=self, intf="pg1", datapath="l2", direction="rx")
|
|
ipfix1.add_vpp_config()
|
|
|
|
ipfix2 = VppCFLOW(test=self, intf="pg2", datapath="ip4", direction="tx")
|
|
ipfix2.enable_flowprobe_feature()
|
|
|
|
ipfix3 = VppCFLOW(test=self, intf="pg3", datapath="ip6", direction="both")
|
|
ipfix3.enable_flowprobe_feature()
|
|
|
|
# When request "all", dump should contain all enabled interfaces
|
|
dump = self.vapi.flowprobe_interface_dump()
|
|
self.assertEqual(len(dump), 3)
|
|
|
|
# Verify 1st interface
|
|
self.assertEqual(dump[0].sw_if_index, self.pg1.sw_if_index)
|
|
self.assertEqual(
|
|
dump[0].which, VppEnum.vl_api_flowprobe_which_t.FLOWPROBE_WHICH_L2
|
|
)
|
|
self.assertEqual(
|
|
dump[0].direction,
|
|
VppEnum.vl_api_flowprobe_direction_t.FLOWPROBE_DIRECTION_RX,
|
|
)
|
|
|
|
# Verify 2nd interface
|
|
self.assertEqual(dump[1].sw_if_index, self.pg2.sw_if_index)
|
|
self.assertEqual(
|
|
dump[1].which, VppEnum.vl_api_flowprobe_which_t.FLOWPROBE_WHICH_IP4
|
|
)
|
|
self.assertEqual(
|
|
dump[1].direction,
|
|
VppEnum.vl_api_flowprobe_direction_t.FLOWPROBE_DIRECTION_TX,
|
|
)
|
|
|
|
# Verify 3rd interface
|
|
self.assertEqual(dump[2].sw_if_index, self.pg3.sw_if_index)
|
|
self.assertEqual(
|
|
dump[2].which, VppEnum.vl_api_flowprobe_which_t.FLOWPROBE_WHICH_IP6
|
|
)
|
|
self.assertEqual(
|
|
dump[2].direction,
|
|
VppEnum.vl_api_flowprobe_direction_t.FLOWPROBE_DIRECTION_BOTH,
|
|
)
|
|
|
|
# When request 2nd interface, dump should contain only the specified interface
|
|
dump = self.vapi.flowprobe_interface_dump(sw_if_index=self.pg2.sw_if_index)
|
|
self.assertEqual(len(dump), 1)
|
|
|
|
# Verify 2nd interface
|
|
self.assertEqual(dump[0].sw_if_index, self.pg2.sw_if_index)
|
|
self.assertEqual(
|
|
dump[0].which, VppEnum.vl_api_flowprobe_which_t.FLOWPROBE_WHICH_IP4
|
|
)
|
|
self.assertEqual(
|
|
dump[0].direction,
|
|
VppEnum.vl_api_flowprobe_direction_t.FLOWPROBE_DIRECTION_TX,
|
|
)
|
|
|
|
# When request 99th interface, dump should be empty
|
|
dump = self.vapi.flowprobe_interface_dump(sw_if_index=99)
|
|
self.assertEqual(len(dump), 0)
|
|
|
|
ipfix1.remove_vpp_config()
|
|
ipfix2.remove_vpp_config()
|
|
ipfix3.remove_vpp_config()
|
|
self.logger.info("FFP_TEST_FINISH_0003")
|
|
|
|
def test_get_params(self):
|
|
"""Get IPFIX flow record generation parameters"""
|
|
self.logger.info("FFP_TEST_START_0004")
|
|
|
|
# Enable feature for an interface with custom parameters
|
|
ipfix = VppCFLOW(test=self, active=20, passive=40, layer="l2 l3 l4")
|
|
ipfix.add_vpp_config()
|
|
|
|
# Get and verify parameters
|
|
params = self.vapi.flowprobe_get_params()
|
|
self.assertEqual(params.active_timer, 20)
|
|
self.assertEqual(params.passive_timer, 40)
|
|
record_flags = VppEnum.vl_api_flowprobe_record_flags_t.FLOWPROBE_RECORD_FLAG_L2
|
|
record_flags |= VppEnum.vl_api_flowprobe_record_flags_t.FLOWPROBE_RECORD_FLAG_L3
|
|
record_flags |= VppEnum.vl_api_flowprobe_record_flags_t.FLOWPROBE_RECORD_FLAG_L4
|
|
self.assertEqual(params.record_flags, record_flags)
|
|
|
|
ipfix.remove_vpp_config()
|
|
self.logger.info("FFP_TEST_FINISH_0004")
|
|
|
|
|
|
class DatapathTestsHolder(object):
|
|
"""collect information on Ethernet, IP4 and IP6 datapath (no timers)"""
|
|
|
|
@classmethod
|
|
def setUpClass(cls):
|
|
super(DatapathTestsHolder, cls).setUpClass()
|
|
|
|
@classmethod
|
|
def tearDownClass(cls):
|
|
super(DatapathTestsHolder, cls).tearDownClass()
|
|
|
|
def test_templatesL2(self):
|
|
"""verify template on L2 datapath"""
|
|
self.logger.info("FFP_TEST_START_0000")
|
|
self.pg_enable_capture(self.pg_interfaces)
|
|
|
|
ipfix = VppCFLOW(
|
|
test=self, intf=self.intf1, layer="l2", direction=self.direction
|
|
)
|
|
ipfix.add_vpp_config()
|
|
|
|
# template packet should arrive immediately
|
|
self.vapi.ipfix_flush()
|
|
ipfix.verify_templates(timeout=3, count=1)
|
|
self.collector.get_capture(1)
|
|
|
|
ipfix.remove_vpp_config()
|
|
self.logger.info("FFP_TEST_FINISH_0000")
|
|
|
|
def test_L2onL2(self):
|
|
"""L2 data on L2 datapath"""
|
|
self.logger.info("FFP_TEST_START_0001")
|
|
self.pg_enable_capture(self.pg_interfaces)
|
|
self.pkts = []
|
|
|
|
ipfix = VppCFLOW(
|
|
test=self, intf=self.intf1, layer="l2", direction=self.direction
|
|
)
|
|
ipfix.add_vpp_config()
|
|
|
|
ipfix_decoder = IPFIXDecoder()
|
|
# template packet should arrive immediately
|
|
templates = ipfix.verify_templates(ipfix_decoder, count=1)
|
|
|
|
self.create_stream(packets=1)
|
|
capture = self.send_packets()
|
|
|
|
# make sure the one packet we expect actually showed up
|
|
self.vapi.ipfix_flush()
|
|
cflow = self.wait_for_cflow_packet(self.collector, templates[0])
|
|
self.verify_cflow_data_detail(
|
|
ipfix_decoder,
|
|
capture,
|
|
cflow,
|
|
{2: "packets", 256: 8, 61: (self.direction == "tx")},
|
|
)
|
|
self.collector.get_capture(2)
|
|
|
|
ipfix.remove_vpp_config()
|
|
self.logger.info("FFP_TEST_FINISH_0001")
|
|
|
|
def test_L3onL2(self):
|
|
"""L3 data on L2 datapath"""
|
|
self.logger.info("FFP_TEST_START_0002")
|
|
self.pg_enable_capture(self.pg_interfaces)
|
|
self.pkts = []
|
|
|
|
ipfix = VppCFLOW(
|
|
test=self, intf=self.intf1, layer="l3", direction=self.direction
|
|
)
|
|
ipfix.add_vpp_config()
|
|
|
|
ipfix_decoder = IPFIXDecoder()
|
|
# template packet should arrive immediately
|
|
templates = ipfix.verify_templates(ipfix_decoder, count=2)
|
|
|
|
self.create_stream(packets=1)
|
|
capture = self.send_packets()
|
|
|
|
# make sure the one packet we expect actually showed up
|
|
self.vapi.ipfix_flush()
|
|
cflow = self.wait_for_cflow_packet(self.collector, templates[0])
|
|
self.verify_cflow_data_detail(
|
|
ipfix_decoder,
|
|
capture,
|
|
cflow,
|
|
{
|
|
2: "packets",
|
|
4: 17,
|
|
8: "src_ip",
|
|
12: "dst_ip",
|
|
61: (self.direction == "tx"),
|
|
},
|
|
)
|
|
|
|
self.collector.get_capture(3)
|
|
|
|
ipfix.remove_vpp_config()
|
|
self.logger.info("FFP_TEST_FINISH_0002")
|
|
|
|
def test_L23onL2(self):
|
|
"""L2/3 data on L2 datapath"""
|
|
self.pg_enable_capture(self.pg_interfaces)
|
|
self.pkts = []
|
|
|
|
ipfix = VppCFLOW(
|
|
test=self, intf=self.intf1, layer="l2 l3", direction=self.direction
|
|
)
|
|
ipfix.add_vpp_config()
|
|
|
|
ipfix_decoder = IPFIXDecoder()
|
|
# template packet should arrive immediately
|
|
templates = ipfix.verify_templates(ipfix_decoder, count=3)
|
|
|
|
# verify IPv4 and IPv6 flows
|
|
for ip_ver in ("v4", "v6"):
|
|
self.create_stream(packets=1, ip_ver=ip_ver)
|
|
capture = self.send_packets()
|
|
|
|
# make sure the one packet we expect actually showed up
|
|
self.vapi.ipfix_flush()
|
|
cflow = self.wait_for_cflow_packet(
|
|
self.collector, templates[1 if ip_ver == "v4" else 2]
|
|
)
|
|
src_ip_id = 8 if ip_ver == "v4" else 27
|
|
dst_ip_id = 12 if ip_ver == "v4" else 28
|
|
self.verify_cflow_data_detail(
|
|
ipfix_decoder,
|
|
capture,
|
|
cflow,
|
|
{
|
|
2: "packets",
|
|
256: 8 if ip_ver == "v4" else 56710,
|
|
4: 17,
|
|
src_ip_id: "src_ip",
|
|
dst_ip_id: "dst_ip",
|
|
61: (self.direction == "tx"),
|
|
},
|
|
ip_ver=ip_ver,
|
|
)
|
|
|
|
# verify non-IP flow
|
|
self.pkts = [
|
|
(
|
|
Ether(dst=self.pg2.local_mac, src=self.pg1.remote_mac)
|
|
/ SlowProtocol()
|
|
/ LACP()
|
|
)
|
|
]
|
|
capture = self.send_packets()
|
|
|
|
# make sure the one packet we expect actually showed up
|
|
self.vapi.ipfix_flush()
|
|
cflow = self.wait_for_cflow_packet(self.collector, templates[0])
|
|
self.verify_cflow_data_detail(
|
|
ipfix_decoder,
|
|
capture,
|
|
cflow,
|
|
{2: "packets", 256: 2440, 61: (self.direction == "tx")},
|
|
)
|
|
|
|
self.collector.get_capture(6)
|
|
|
|
ipfix.remove_vpp_config()
|
|
|
|
def test_L4onL2(self):
|
|
"""L4 data on L2 datapath"""
|
|
self.logger.info("FFP_TEST_START_0003")
|
|
self.pg_enable_capture(self.pg_interfaces)
|
|
self.pkts = []
|
|
|
|
ipfix = VppCFLOW(
|
|
test=self, intf=self.intf1, layer="l4", direction=self.direction
|
|
)
|
|
ipfix.add_vpp_config()
|
|
|
|
ipfix_decoder = IPFIXDecoder()
|
|
# template packet should arrive immediately
|
|
templates = ipfix.verify_templates(ipfix_decoder, count=2)
|
|
|
|
self.create_stream(packets=1)
|
|
capture = self.send_packets()
|
|
|
|
# make sure the one packet we expect actually showed up
|
|
self.vapi.ipfix_flush()
|
|
cflow = self.wait_for_cflow_packet(self.collector, templates[0])
|
|
self.verify_cflow_data_detail(
|
|
ipfix_decoder,
|
|
capture,
|
|
cflow,
|
|
{2: "packets", 7: "sport", 11: "dport", 61: (self.direction == "tx")},
|
|
)
|
|
|
|
self.collector.get_capture(3)
|
|
|
|
ipfix.remove_vpp_config()
|
|
self.logger.info("FFP_TEST_FINISH_0003")
|
|
|
|
def test_templatesIp4(self):
|
|
"""verify templates on IP4 datapath"""
|
|
self.logger.info("FFP_TEST_START_0000")
|
|
|
|
self.pg_enable_capture(self.pg_interfaces)
|
|
|
|
ipfix = VppCFLOW(
|
|
test=self, intf=self.intf1, datapath="ip4", direction=self.direction
|
|
)
|
|
ipfix.add_vpp_config()
|
|
|
|
# template packet should arrive immediately
|
|
self.vapi.ipfix_flush()
|
|
ipfix.verify_templates(timeout=3, count=1)
|
|
self.collector.get_capture(1)
|
|
|
|
ipfix.remove_vpp_config()
|
|
|
|
self.logger.info("FFP_TEST_FINISH_0000")
|
|
|
|
def test_L2onIP4(self):
|
|
"""L2 data on IP4 datapath"""
|
|
self.logger.info("FFP_TEST_START_0001")
|
|
self.pg_enable_capture(self.pg_interfaces)
|
|
self.pkts = []
|
|
|
|
ipfix = VppCFLOW(
|
|
test=self,
|
|
intf=self.intf2,
|
|
layer="l2",
|
|
datapath="ip4",
|
|
direction=self.direction,
|
|
)
|
|
ipfix.add_vpp_config()
|
|
|
|
ipfix_decoder = IPFIXDecoder()
|
|
# template packet should arrive immediately
|
|
templates = ipfix.verify_templates(ipfix_decoder, count=1)
|
|
|
|
self.create_stream(src_if=self.pg3, dst_if=self.pg4, packets=1)
|
|
capture = self.send_packets(src_if=self.pg3, dst_if=self.pg4)
|
|
|
|
# make sure the one packet we expect actually showed up
|
|
self.vapi.ipfix_flush()
|
|
cflow = self.wait_for_cflow_packet(self.collector, templates[0])
|
|
self.verify_cflow_data_detail(
|
|
ipfix_decoder,
|
|
capture,
|
|
cflow,
|
|
{2: "packets", 256: 8, 61: (self.direction == "tx")},
|
|
)
|
|
|
|
# expected two templates and one cflow packet
|
|
self.collector.get_capture(2)
|
|
|
|
ipfix.remove_vpp_config()
|
|
self.logger.info("FFP_TEST_FINISH_0001")
|
|
|
|
def test_L3onIP4(self):
|
|
"""L3 data on IP4 datapath"""
|
|
self.logger.info("FFP_TEST_START_0002")
|
|
self.pg_enable_capture(self.pg_interfaces)
|
|
self.pkts = []
|
|
|
|
ipfix = VppCFLOW(
|
|
test=self,
|
|
intf=self.intf2,
|
|
layer="l3",
|
|
datapath="ip4",
|
|
direction=self.direction,
|
|
)
|
|
ipfix.add_vpp_config()
|
|
|
|
ipfix_decoder = IPFIXDecoder()
|
|
# template packet should arrive immediately
|
|
templates = ipfix.verify_templates(ipfix_decoder, count=1)
|
|
|
|
self.create_stream(src_if=self.pg3, dst_if=self.pg4, packets=1)
|
|
capture = self.send_packets(src_if=self.pg3, dst_if=self.pg4)
|
|
|
|
# make sure the one packet we expect actually showed up
|
|
self.vapi.ipfix_flush()
|
|
cflow = self.wait_for_cflow_packet(self.collector, templates[0])
|
|
self.verify_cflow_data_detail(
|
|
ipfix_decoder,
|
|
capture,
|
|
cflow,
|
|
{
|
|
1: "octets",
|
|
2: "packets",
|
|
8: "src_ip",
|
|
12: "dst_ip",
|
|
61: (self.direction == "tx"),
|
|
},
|
|
)
|
|
|
|
# expected two templates and one cflow packet
|
|
self.collector.get_capture(2)
|
|
|
|
ipfix.remove_vpp_config()
|
|
self.logger.info("FFP_TEST_FINISH_0002")
|
|
|
|
def test_L4onIP4(self):
|
|
"""L4 data on IP4 datapath"""
|
|
self.logger.info("FFP_TEST_START_0003")
|
|
self.pg_enable_capture(self.pg_interfaces)
|
|
self.pkts = []
|
|
|
|
ipfix = VppCFLOW(
|
|
test=self,
|
|
intf=self.intf2,
|
|
layer="l4",
|
|
datapath="ip4",
|
|
direction=self.direction,
|
|
)
|
|
ipfix.add_vpp_config()
|
|
|
|
ipfix_decoder = IPFIXDecoder()
|
|
# template packet should arrive immediately
|
|
templates = ipfix.verify_templates(ipfix_decoder, count=1)
|
|
|
|
self.create_stream(src_if=self.pg3, dst_if=self.pg4, packets=1)
|
|
capture = self.send_packets(src_if=self.pg3, dst_if=self.pg4)
|
|
|
|
# make sure the one packet we expect actually showed up
|
|
self.vapi.ipfix_flush()
|
|
cflow = self.wait_for_cflow_packet(self.collector, templates[0])
|
|
self.verify_cflow_data_detail(
|
|
ipfix_decoder,
|
|
capture,
|
|
cflow,
|
|
{2: "packets", 7: "sport", 11: "dport", 61: (self.direction == "tx")},
|
|
)
|
|
|
|
# expected two templates and one cflow packet
|
|
self.collector.get_capture(2)
|
|
|
|
ipfix.remove_vpp_config()
|
|
self.logger.info("FFP_TEST_FINISH_0003")
|
|
|
|
def test_templatesIP6(self):
|
|
"""verify templates on IP6 datapath"""
|
|
self.logger.info("FFP_TEST_START_0000")
|
|
self.pg_enable_capture(self.pg_interfaces)
|
|
|
|
ipfix = VppCFLOW(
|
|
test=self, intf=self.intf1, datapath="ip6", direction=self.direction
|
|
)
|
|
ipfix.add_vpp_config()
|
|
|
|
# template packet should arrive immediately
|
|
ipfix.verify_templates(count=1)
|
|
self.collector.get_capture(1)
|
|
|
|
ipfix.remove_vpp_config()
|
|
|
|
self.logger.info("FFP_TEST_FINISH_0000")
|
|
|
|
def test_L2onIP6(self):
|
|
"""L2 data on IP6 datapath"""
|
|
self.logger.info("FFP_TEST_START_0001")
|
|
self.pg_enable_capture(self.pg_interfaces)
|
|
self.pkts = []
|
|
|
|
ipfix = VppCFLOW(
|
|
test=self,
|
|
intf=self.intf3,
|
|
layer="l2",
|
|
datapath="ip6",
|
|
direction=self.direction,
|
|
)
|
|
ipfix.add_vpp_config()
|
|
|
|
ipfix_decoder = IPFIXDecoder()
|
|
# template packet should arrive immediately
|
|
templates = ipfix.verify_templates(ipfix_decoder, count=1)
|
|
|
|
self.create_stream(src_if=self.pg5, dst_if=self.pg6, packets=1, ip_ver="IPv6")
|
|
capture = self.send_packets(src_if=self.pg5, dst_if=self.pg6)
|
|
|
|
# make sure the one packet we expect actually showed up
|
|
self.vapi.ipfix_flush()
|
|
cflow = self.wait_for_cflow_packet(self.collector, templates[0])
|
|
self.verify_cflow_data_detail(
|
|
ipfix_decoder,
|
|
capture,
|
|
cflow,
|
|
{2: "packets", 256: 56710, 61: (self.direction == "tx")},
|
|
ip_ver="v6",
|
|
)
|
|
|
|
# expected two templates and one cflow packet
|
|
self.collector.get_capture(2)
|
|
|
|
ipfix.remove_vpp_config()
|
|
self.logger.info("FFP_TEST_FINISH_0001")
|
|
|
|
def test_L3onIP6(self):
|
|
"""L3 data on IP6 datapath"""
|
|
self.logger.info("FFP_TEST_START_0002")
|
|
self.pg_enable_capture(self.pg_interfaces)
|
|
self.pkts = []
|
|
|
|
ipfix = VppCFLOW(
|
|
test=self,
|
|
intf=self.intf3,
|
|
layer="l3",
|
|
datapath="ip6",
|
|
direction=self.direction,
|
|
)
|
|
ipfix.add_vpp_config()
|
|
|
|
ipfix_decoder = IPFIXDecoder()
|
|
# template packet should arrive immediately
|
|
templates = ipfix.verify_templates(ipfix_decoder, count=1)
|
|
|
|
self.create_stream(src_if=self.pg5, dst_if=self.pg6, packets=1, ip_ver="IPv6")
|
|
capture = self.send_packets(src_if=self.pg5, dst_if=self.pg6)
|
|
|
|
# make sure the one packet we expect actually showed up
|
|
self.vapi.ipfix_flush()
|
|
cflow = self.wait_for_cflow_packet(self.collector, templates[0])
|
|
self.verify_cflow_data_detail(
|
|
ipfix_decoder,
|
|
capture,
|
|
cflow,
|
|
{2: "packets", 27: "src_ip", 28: "dst_ip", 61: (self.direction == "tx")},
|
|
ip_ver="v6",
|
|
)
|
|
|
|
# expected two templates and one cflow packet
|
|
self.collector.get_capture(2)
|
|
|
|
ipfix.remove_vpp_config()
|
|
self.logger.info("FFP_TEST_FINISH_0002")
|
|
|
|
def test_L4onIP6(self):
|
|
"""L4 data on IP6 datapath"""
|
|
self.logger.info("FFP_TEST_START_0003")
|
|
self.pg_enable_capture(self.pg_interfaces)
|
|
self.pkts = []
|
|
|
|
ipfix = VppCFLOW(
|
|
test=self,
|
|
intf=self.intf3,
|
|
layer="l4",
|
|
datapath="ip6",
|
|
direction=self.direction,
|
|
)
|
|
ipfix.add_vpp_config()
|
|
|
|
ipfix_decoder = IPFIXDecoder()
|
|
# template packet should arrive immediately
|
|
templates = ipfix.verify_templates(ipfix_decoder, count=1)
|
|
|
|
self.create_stream(src_if=self.pg5, dst_if=self.pg6, packets=1, ip_ver="IPv6")
|
|
capture = self.send_packets(src_if=self.pg5, dst_if=self.pg6)
|
|
|
|
# make sure the one packet we expect actually showed up
|
|
self.vapi.ipfix_flush()
|
|
cflow = self.wait_for_cflow_packet(self.collector, templates[0])
|
|
self.verify_cflow_data_detail(
|
|
ipfix_decoder,
|
|
capture,
|
|
cflow,
|
|
{2: "packets", 7: "sport", 11: "dport", 61: (self.direction == "tx")},
|
|
ip_ver="v6",
|
|
)
|
|
|
|
# expected two templates and one cflow packet
|
|
self.collector.get_capture(2)
|
|
|
|
ipfix.remove_vpp_config()
|
|
self.logger.info("FFP_TEST_FINISH_0003")
|
|
|
|
def test_0001(self):
|
|
"""no timers, one CFLOW packet, 9 Flows inside"""
|
|
self.logger.info("FFP_TEST_START_0001")
|
|
self.pg_enable_capture(self.pg_interfaces)
|
|
self.pkts = []
|
|
|
|
ipfix = VppCFLOW(test=self, intf=self.intf1, direction=self.direction)
|
|
ipfix.add_vpp_config()
|
|
|
|
ipfix_decoder = IPFIXDecoder()
|
|
# template packet should arrive immediately
|
|
templates = ipfix.verify_templates(ipfix_decoder)
|
|
|
|
self.create_stream(packets=9)
|
|
capture = self.send_packets()
|
|
|
|
# make sure the one packet we expect actually showed up
|
|
self.vapi.ipfix_flush()
|
|
cflow = self.wait_for_cflow_packet(self.collector, templates[1])
|
|
self.verify_cflow_data_notimer(ipfix_decoder, capture, [cflow])
|
|
self.collector.get_capture(4)
|
|
|
|
ipfix.remove_vpp_config()
|
|
self.logger.info("FFP_TEST_FINISH_0001")
|
|
|
|
def test_0002(self):
|
|
"""no timers, two CFLOW packets (mtu=260), 3 Flows in each"""
|
|
self.logger.info("FFP_TEST_START_0002")
|
|
self.pg_enable_capture(self.pg_interfaces)
|
|
self.pkts = []
|
|
|
|
ipfix = VppCFLOW(test=self, intf=self.intf1, direction=self.direction, mtu=260)
|
|
ipfix.add_vpp_config()
|
|
|
|
ipfix_decoder = IPFIXDecoder()
|
|
# template packet should arrive immediately
|
|
self.vapi.ipfix_flush()
|
|
templates = ipfix.verify_templates(ipfix_decoder)
|
|
|
|
self.create_stream(packets=6)
|
|
capture = self.send_packets()
|
|
|
|
# make sure the one packet we expect actually showed up
|
|
cflows = []
|
|
self.vapi.ipfix_flush()
|
|
cflows.append(self.wait_for_cflow_packet(self.collector, templates[1]))
|
|
cflows.append(self.wait_for_cflow_packet(self.collector, templates[1]))
|
|
self.verify_cflow_data_notimer(ipfix_decoder, capture, cflows)
|
|
self.collector.get_capture(5)
|
|
|
|
ipfix.remove_vpp_config()
|
|
self.logger.info("FFP_TEST_FINISH_0002")
|
|
|
|
|
|
@tag_fixme_vpp_workers
|
|
class DatapathTx(MethodHolder, DatapathTestsHolder):
|
|
"""Collect info on Ethernet, IP4 and IP6 datapath (TX) (no timers)"""
|
|
|
|
intf1 = "pg2"
|
|
intf2 = "pg4"
|
|
intf3 = "pg6"
|
|
direction = "tx"
|
|
|
|
|
|
@tag_fixme_vpp_workers
|
|
class DatapathRx(MethodHolder, DatapathTestsHolder):
|
|
"""Collect info on Ethernet, IP4 and IP6 datapath (RX) (no timers)"""
|
|
|
|
intf1 = "pg1"
|
|
intf2 = "pg3"
|
|
intf3 = "pg5"
|
|
direction = "rx"
|
|
|
|
|
|
@unittest.skipUnless(config.extended, "part of extended tests")
|
|
class DisableIPFIX(MethodHolder):
|
|
"""Disable IPFIX"""
|
|
|
|
@classmethod
|
|
def setUpClass(cls):
|
|
super(DisableIPFIX, cls).setUpClass()
|
|
|
|
@classmethod
|
|
def tearDownClass(cls):
|
|
super(DisableIPFIX, cls).tearDownClass()
|
|
|
|
def test_0001(self):
|
|
"""disable IPFIX after first packets"""
|
|
self.logger.info("FFP_TEST_START_0001")
|
|
self.pg_enable_capture(self.pg_interfaces)
|
|
self.pkts = []
|
|
|
|
ipfix = VppCFLOW(test=self)
|
|
ipfix.add_vpp_config()
|
|
|
|
ipfix_decoder = IPFIXDecoder()
|
|
# template packet should arrive immediately
|
|
templates = ipfix.verify_templates(ipfix_decoder)
|
|
|
|
self.create_stream()
|
|
self.send_packets()
|
|
|
|
# make sure the one packet we expect actually showed up
|
|
self.vapi.ipfix_flush()
|
|
self.wait_for_cflow_packet(self.collector, templates[1])
|
|
self.collector.get_capture(4)
|
|
|
|
# disable IPFIX
|
|
ipfix.disable_exporter()
|
|
self.pg_enable_capture([self.collector])
|
|
|
|
self.send_packets()
|
|
|
|
# make sure no one packet arrived in 1 minute
|
|
self.vapi.ipfix_flush()
|
|
self.sleep(1, "wait before verifying no packets sent")
|
|
self.collector.assert_nothing_captured()
|
|
|
|
ipfix.remove_vpp_config()
|
|
self.logger.info("FFP_TEST_FINISH_0001")
|
|
|
|
|
|
@unittest.skipUnless(config.extended, "part of extended tests")
|
|
class ReenableIPFIX(MethodHolder):
|
|
"""Re-enable IPFIX"""
|
|
|
|
@classmethod
|
|
def setUpClass(cls):
|
|
super(ReenableIPFIX, cls).setUpClass()
|
|
|
|
@classmethod
|
|
def tearDownClass(cls):
|
|
super(ReenableIPFIX, cls).tearDownClass()
|
|
|
|
def test_0011(self):
|
|
"""disable IPFIX after first packets and re-enable after few packets"""
|
|
self.logger.info("FFP_TEST_START_0001")
|
|
self.pg_enable_capture(self.pg_interfaces)
|
|
self.pkts = []
|
|
|
|
ipfix = VppCFLOW(test=self)
|
|
ipfix.add_vpp_config()
|
|
|
|
ipfix_decoder = IPFIXDecoder()
|
|
# template packet should arrive immediately
|
|
templates = ipfix.verify_templates(ipfix_decoder)
|
|
|
|
self.create_stream(packets=5)
|
|
self.send_packets()
|
|
|
|
# make sure the one packet we expect actually showed up
|
|
self.vapi.ipfix_flush()
|
|
self.wait_for_cflow_packet(self.collector, templates[1])
|
|
self.collector.get_capture(4)
|
|
|
|
# disable IPFIX
|
|
ipfix.disable_exporter()
|
|
self.vapi.ipfix_flush()
|
|
self.pg_enable_capture([self.collector])
|
|
|
|
self.send_packets()
|
|
|
|
# make sure no one packet arrived in active timer span
|
|
self.vapi.ipfix_flush()
|
|
self.sleep(1, "wait before verifying no packets sent")
|
|
self.collector.assert_nothing_captured()
|
|
self.pg2.get_capture(5)
|
|
|
|
# enable IPFIX
|
|
ipfix.enable_exporter()
|
|
|
|
capture = self.collector.get_capture(4)
|
|
nr_templates = 0
|
|
nr_data = 0
|
|
for p in capture:
|
|
self.assertTrue(p.haslayer(IPFIX))
|
|
if p.haslayer(Template):
|
|
nr_templates += 1
|
|
self.assertTrue(nr_templates, 3)
|
|
for p in capture:
|
|
self.assertTrue(p.haslayer(IPFIX))
|
|
if p.haslayer(Data):
|
|
nr_data += 1
|
|
self.assertTrue(nr_templates, 1)
|
|
|
|
ipfix.remove_vpp_config()
|
|
self.logger.info("FFP_TEST_FINISH_0001")
|
|
|
|
|
|
@unittest.skipUnless(config.extended, "part of extended tests")
|
|
class DisableFP(MethodHolder):
|
|
"""Disable Flowprobe feature"""
|
|
|
|
@classmethod
|
|
def setUpClass(cls):
|
|
super(DisableFP, cls).setUpClass()
|
|
|
|
@classmethod
|
|
def tearDownClass(cls):
|
|
super(DisableFP, cls).tearDownClass()
|
|
|
|
def test_0001(self):
|
|
"""disable flowprobe feature after first packets"""
|
|
self.logger.info("FFP_TEST_START_0001")
|
|
self.pg_enable_capture(self.pg_interfaces)
|
|
self.pkts = []
|
|
ipfix = VppCFLOW(test=self)
|
|
ipfix.add_vpp_config()
|
|
|
|
ipfix_decoder = IPFIXDecoder()
|
|
# template packet should arrive immediately
|
|
templates = ipfix.verify_templates(ipfix_decoder)
|
|
|
|
self.create_stream()
|
|
self.send_packets()
|
|
|
|
# make sure the one packet we expect actually showed up
|
|
self.vapi.ipfix_flush()
|
|
self.wait_for_cflow_packet(self.collector, templates[1])
|
|
self.collector.get_capture(4)
|
|
|
|
# disable IPFIX
|
|
ipfix.disable_flowprobe_feature()
|
|
self.pg_enable_capture([self.collector])
|
|
|
|
self.send_packets()
|
|
|
|
# make sure no one packet arrived in active timer span
|
|
self.vapi.ipfix_flush()
|
|
self.sleep(1, "wait before verifying no packets sent")
|
|
self.collector.assert_nothing_captured()
|
|
|
|
ipfix.remove_vpp_config()
|
|
self.logger.info("FFP_TEST_FINISH_0001")
|
|
|
|
|
|
@unittest.skipUnless(config.extended, "part of extended tests")
|
|
class ReenableFP(MethodHolder):
|
|
"""Re-enable Flowprobe feature"""
|
|
|
|
@classmethod
|
|
def setUpClass(cls):
|
|
super(ReenableFP, cls).setUpClass()
|
|
|
|
@classmethod
|
|
def tearDownClass(cls):
|
|
super(ReenableFP, cls).tearDownClass()
|
|
|
|
def test_0001(self):
|
|
"""disable flowprobe feature after first packets and re-enable
|
|
after few packets"""
|
|
self.logger.info("FFP_TEST_START_0001")
|
|
self.pg_enable_capture(self.pg_interfaces)
|
|
self.pkts = []
|
|
|
|
ipfix = VppCFLOW(test=self)
|
|
ipfix.add_vpp_config()
|
|
|
|
ipfix_decoder = IPFIXDecoder()
|
|
# template packet should arrive immediately
|
|
self.vapi.ipfix_flush()
|
|
templates = ipfix.verify_templates(ipfix_decoder, timeout=3)
|
|
|
|
self.create_stream()
|
|
self.send_packets()
|
|
|
|
# make sure the one packet we expect actually showed up
|
|
self.vapi.ipfix_flush()
|
|
self.wait_for_cflow_packet(self.collector, templates[1], 5)
|
|
self.collector.get_capture(4)
|
|
|
|
# disable FPP feature
|
|
ipfix.disable_flowprobe_feature()
|
|
self.pg_enable_capture([self.collector])
|
|
|
|
self.send_packets()
|
|
|
|
# make sure no one packet arrived in active timer span
|
|
self.vapi.ipfix_flush()
|
|
self.sleep(5, "wait before verifying no packets sent")
|
|
self.collector.assert_nothing_captured()
|
|
|
|
# enable FPP feature
|
|
ipfix.enable_flowprobe_feature()
|
|
self.vapi.ipfix_flush()
|
|
templates = ipfix.verify_templates(ipfix_decoder, timeout=3)
|
|
|
|
self.send_packets()
|
|
|
|
# make sure the next packets (templates and data) we expect actually
|
|
# showed up
|
|
self.vapi.ipfix_flush()
|
|
self.wait_for_cflow_packet(self.collector, templates[1], 5)
|
|
self.collector.get_capture(4)
|
|
|
|
ipfix.remove_vpp_config()
|
|
self.logger.info("FFP_TEST_FINISH_0001")
|
|
|
|
|
|
if __name__ == "__main__":
|
|
unittest.main(testRunner=VppTestRunner)
|