ligang/vpp
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity
vpp/dpdk/Makefile
Matthew Smith 19d4ecddeb backport mlx patch for DPDK >= 18.05 
Memory allocation changed in DPDK 18.05. The mlx4 and mlx5
PMDs did not support using externally allocated memory.

The patch for mlx5 was generated by Mellanox. That patch was
modified to apply to the mlx4 PMD and tested on Microsoft
Azure.

Patches were originally tested and used with VPP master
(prerelease 18.10). Then backported to VPP stable/1807.

Change-Id: I883e0d796e59702731bec06c96210f0b134188db
Signed-off-by: Matthew Smith <mgsmith@netgate.com>
2018-08-29 13:30:37 -05:00

470 lines
15 KiB
Makefile
Raw Blame History

# Copyright (c) 2015 Cisco and/or its affiliates.
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at:
#
# http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
# Scripts require non-POSIX parts of bash
SHELL := /bin/bash
DPDK_BUILD_DIR ?= $(CURDIR)/_build
DPDK_INSTALL_DIR ?= $(CURDIR)/_install
DPDK_PKTMBUF_HEADROOM ?= 128
DPDK_CACHE_LINE_SIZE ?= 64
DPDK_DOWNLOAD_DIR ?= $(HOME)/Downloads
DPDK_DEBUG ?= n
DPDK_MLX4_PMD ?= n
DPDK_MLX5_PMD ?= n
DPDK_TAP_PMD ?= n
DPDK_FAILSAFE_PMD ?= n
B := $(DPDK_BUILD_DIR)
I := $(DPDK_INSTALL_DIR)
DPDK_VERSION ?= 18.05
PKG_SUFFIX ?= vpp3
DPDK_BASE_URL ?= http://fast.dpdk.org/rel
DPDK_TARBALL := dpdk-$(DPDK_VERSION).tar.xz
DPDK_TAR_URL := $(DPDK_BASE_URL)/$(DPDK_TARBALL)
DPDK_18.02.2_TARBALL_MD5_CKSUM := 75ad6d39b513649744e49c9fcbbb9ca5
DPDK_18.05_TARBALL_MD5_CKSUM := 9fc86367cd9407ff6a8dfea56c4eddc4
MACHINE=$(shell uname -m)
# replace dot with space, and if 3rd word exists we deal with stable dpdk rel
ifeq ($(word 3,$(subst ., ,$(DPDK_VERSION))),)
DPDK_SOURCE := $(B)/dpdk-$(DPDK_VERSION)
else
DPDK_SOURCE := $(B)/dpdk-stable-$(DPDK_VERSION)
endif
NASM_BASE_URL := http://www.nasm.us/pub/nasm/releasebuilds
NASM_VER := 2.13.01
NASM_TARBALL := nasm-$(NASM_VER).tar.xz
NASM_TAR_URL := $(NASM_BASE_URL)/$(NASM_VER)/$(NASM_TARBALL)
NASM_SOURCE := $(B)/nasm-$(NASM_VER)
ifneq (,$(findstring 18.02,$(DPDK_VERSION)))
IPSEC_MB_VER ?= 0.48
else
IPSEC_MB_VER ?= 0.49
endif
ifeq ($(MACHINE),$(filter $(MACHINE),x86_64))
AESNI ?= y
$(info Building IPSec-MB $(IPSEC_MB_VER) library)
else
AESNI ?= N
endif
AESNIMB_LIB_TARBALL := v$(IPSEC_MB_VER).tar.gz
AESNIMB_LIB_TARBALL_URL := http://github.com/01org/intel-ipsec-mb/archive/$(AESNIMB_LIB_TARBALL)
AESNIMB_LIB_SOURCE := $(B)/intel-ipsec-mb-$(IPSEC_MB_VER)
ifneq (,$(findstring clang,$(CC)))
DPDK_CC=clang
else ifneq (,$(findstring icc,$(CC)))
DPDK_CC=icc
else
DPDK_CC=gcc
endif
##############################################################################
# Intel x86
##############################################################################
ifeq ($(MACHINE),$(filter $(MACHINE),x86_64 i686))
DPDK_TARGET ?= $(MACHINE)-native-linuxapp-$(DPDK_CC)
DPDK_MACHINE ?= nhm
DPDK_TUNE ?= core-avx2
##############################################################################
# ARM64
##############################################################################
else ifeq ($(MACHINE),aarch64)
CROSS :=
export CROSS
DPDK_TARGET ?= arm64-armv8a-linuxapp-$(DPDK_CC)
DPDK_MACHINE ?= armv8a
DPDK_TUNE ?= generic
CPU_IMP_ARM = 0x41
CPU_IMP_CAVIUM = 0x43
CPU_PART_ARM_CORTEX_A53 = 0xd03
CPU_PART_ARM_CORTEX_A57 = 0xd07
CPU_PART_ARM_CORTEX_A72 = 0xd08
CPU_PART_ARM_CORTEX_A73 = 0xd09
CPU_PART_CAVIUM_THUNDERX = 0x0a1
CPU_PART_CAVIUM_THUNDERX_81XX = 0x0a2
CPU_PART_CAVIUM_THUNDERX_83XX = 0x0a3
MIDR_IMPLEMENTER=$(shell awk '/implementer/ {print $$4;exit}' /proc/cpuinfo)
MIDR_PARTNUM=$(shell awk '/part/ {print $$4;exit}' /proc/cpuinfo)
ifeq ($(MIDR_IMPLEMENTER),$(CPU_IMP_ARM))
##############################################################################
# Arm Cortex
##############################################################################
CPU_PART_ARM_TUNE := $(CPU_PART_ARM_CORTEX_A53)/cortex-a53 \
$(CPU_PART_ARM_CORTEX_A57)/cortex-a57 \
$(CPU_PART_ARM_CORTEX_A72)/cortex-a72 \
$(CPU_PART_ARM_CORTEX_A73)/cortex-a73
CPU_TUNE = $(notdir $(filter $(MIDR_PARTNUM)/%,$(CPU_PART_ARM_TUNE)))
ifneq ($(CPU_TUNE),)
DPDK_TUNE = $(CPU_TUNE)
else
$(warning Unknown Arm CPU)
endif
else ifeq ($(MIDR_IMPLEMENTER),$(CPU_IMP_CAVIUM))
##############################################################################
# Cavium ThunderX
##############################################################################
ifneq (,$(findstring $(MIDR_PARTNUM),$(CPU_PART_CAVIUM_THUNDERX) \
$(CPU_PART_CAVIUM_THUNDERX_81XX) $(CPU_PART_CAVIUM_THUNDERX_83XX)))
DPDK_TARGET = arm64-thunderx-linuxapp-$(DPDK_CC)
DPDK_MACHINE = thunderx
DPDK_CACHE_LINE_SIZE := 128
else
$(warning Unknown Cavium CPU)
endif
endif
##############################################################################
# Unknown platform
##############################################################################
else
$(error Unknown platform)
endif
# /proc/cpuinfo does not exist on platforms without a /proc and on some
# platforms, notably inside containers, it has no content. In those cases
# we assume there's 1 processor; we use 2*ncpu for the -j option.
# NB: GNU Make 4.2 will let us use '$(file </proc/cpuinfo)' to both test
# for file presence and content; for now this will have to do.
JOBS := $(if $(shell [ -f /proc/cpuinfo ] && head /proc/cpuinfo),\
$(shell grep -c ^processor /proc/cpuinfo), 2)
# compiler/linker custom arguments
ifeq ($(DPDK_CC),clang)
DPDK_CPU_CFLAGS := -fPIE -fPIC
else
DPDK_CPU_CFLAGS := -pie -fPIC
endif
ifeq ($(DPDK_DEBUG),n)
DPDK_EXTRA_CFLAGS := -g -mtune=$(DPDK_TUNE)
else
DPDK_EXTRA_CFLAGS := -g -O0
endif
ifeq ($(AESNI),y)
IPSEC_MB_BUILD_PATH := $(B)/intel-ipsec-mb-$(IPSEC_MB_VER)
DPDK_EXTRA_CFLAGS += -L$(IPSEC_MB_BUILD_PATH) -I$(IPSEC_MB_BUILD_PATH)
endif
DPDK_MAKE_EXTRA_ARGS += AESNI_MULTI_BUFFER_LIB_PATH=$(AESNIMB_LIB_SOURCE)
# assemble DPDK make arguments
DPDK_MAKE_ARGS := -C $(DPDK_SOURCE) -j $(JOBS) \
T=$(DPDK_TARGET) \
RTE_CONFIG_TEMPLATE=../custom-config \
EXTRA_CFLAGS="$(DPDK_EXTRA_CFLAGS)" \
EXTRA_LDFLAGS="$(DPDK_EXTRA_LDFLAGS)" \
CPU_CFLAGS="$(DPDK_CPU_CFLAGS)" \
DESTDIR=$(I) \
$(DPDK_MAKE_EXTRA_ARGS)
define set
@if grep -q CONFIG_$1 $@ ; \
then sed -i -e 's/.*\(CONFIG_$1=\).*/\1$2/' $@ ; \
else echo CONFIG_$1=$2 >> $@ ; \
fi
endef
all: build
$(B)/custom-config: $(B)/.patch.ok Makefile
@echo --- generating custom config from $(DPDK_SOURCE)/config/defconfig_$(DPDK_TARGET) ---
@cpp -undef -ffreestanding -x assembler-with-cpp $(DPDK_SOURCE)/config/defconfig_$(DPDK_TARGET) $@
$(call set,RTE_MACHINE,$(DPDK_MACHINE))
@# modify options
$(call set,RTE_MAX_LCORE,256)
$(call set,RTE_PKTMBUF_HEADROOM,$(DPDK_PKTMBUF_HEADROOM))
$(call set,RTE_CACHE_LINE_SIZE,$(DPDK_CACHE_LINE_SIZE))
$(call set,RTE_LIBEAL_USE_HPET,y)
$(call set,RTE_BUILD_COMBINE_LIBS,y)
$(call set,RTE_PCI_CONFIG,y)
$(call set,RTE_PCI_EXTENDED_TAG,"on")
$(call set,RTE_PCI_MAX_READ_REQUEST_SIZE,4096)
@# enable debug init for device drivers
$(call set,RTE_LIBRTE_I40E_DEBUG_INIT,$(DPDK_DEBUG))
$(call set,RTE_LIBRTE_IXGBE_DEBUG_INIT,$(DPDK_DEBUG))
$(call set,RTE_LIBRTE_E1000_DEBUG_INIT,$(DPDK_DEBUG))
$(call set,RTE_LIBRTE_VIRTIO_DEBUG_INIT,$(DPDK_DEBUG))
$(call set,RTE_LIBRTE_VMXNET3_DEBUG_INIT,$(DPDK_DEBUG))
$(call set,RTE_LIBRTE_PMD_BOND,y)
$(call set,RTE_LIBRTE_IP_FRAG,y)
$(call set,RTE_LIBRTE_PMD_QAT,y)
$(call set,RTE_LIBRTE_PMD_AESNI_MB,$(AESNI))
$(call set,RTE_LIBRTE_PMD_AESNI_GCM,$(AESNI))
$(call set,RTE_LIBRTE_MLX4_PMD,$(DPDK_MLX4_PMD))
$(call set,RTE_LIBRTE_MLX5_PMD,$(DPDK_MLX5_PMD))
$(call set,RTE_LIBRTE_MLX4_DLOPEN_DEPS,$(DPDK_MLX4_PMD))
$(call set,RTE_LIBRTE_MLX5_DLOPEN_DEPS,$(DPDK_MLX5_PMD))
$(call set,RTE_LIBRTE_PMD_TAP,$(DPDK_TAP_PMD))
$(call set,RTE_LIBRTE_PMD_FAILSAFE,$(DPDK_FAILSAFE_PMD))
@# not needed
$(call set,RTE_LIBRTE_CFGFILE,n)
$(call set,RTE_LIBRTE_LPM,n)
$(call set,RTE_LIBRTE_ACL,n)
$(call set,RTE_LIBRTE_POWER,n)
$(call set,RTE_LIBRTE_DISTRIBUTOR,n)
$(call set,RTE_LIBRTE_PORT,n)
$(call set,RTE_LIBRTE_TABLE,n)
$(call set,RTE_LIBRTE_PIPELINE,n)
$(call set,RTE_LIBRTE_FLOW_CLASSIFY,n)
$(call set,RTE_KNI_KMOD,n)
$(call set,RTE_EAL_IGB_UIO,n)
@# currently broken in 18.02
$(call set,RTE_LIBRTE_DPAA_BUS,n)
$(call set,RTE_LIBRTE_DPAA_MEMPOOL,n)
$(call set,RTE_LIBRTE_DPAA_PMD,n)
$(call set,RTE_LIBRTE_PMD_DPAA_SEC,n)
$(call set,RTE_LIBRTE_PMD_DPAA_EVENTDEV,n)
@rm -f .config.ok
$(CURDIR)/$(DPDK_TARBALL):
@if [ -e $(DPDK_DOWNLOAD_DIR)/$(DPDK_TARBALL) ] ; \
then cp $(DPDK_DOWNLOAD_DIR)/$(DPDK_TARBALL) $(CURDIR) ; \
else curl -o $(CURDIR)/$(DPDK_TARBALL) -LO $(DPDK_TAR_URL) ; \
fi
@rm -f $(B)/.download.ok
$(CURDIR)/$(NASM_TARBALL):
@if [ -e $(DPDK_DOWNLOAD_DIR)/$(NASM_TARBALL) ] ; \
then cp $(DPDK_DOWNLOAD_DIR)/$(NASM_TARBALL) $(CURDIR) ; \
else curl -o $(CURDIR)/$(NASM_TARBALL) -LO $(NASM_TAR_URL) ; \
fi
$(CURDIR)/$(AESNIMB_LIB_TARBALL):
@if [ -e $(DPDK_DOWNLOAD_DIR)/$(AESNIMB_LIB_TARBALL) ] ; \
then cp $(DPDK_DOWNLOAD_DIR)/$(AESNIMB_LIB_TARBALL) $(CURDIR) ; \
else curl -o $@ -LO $(AESNIMB_LIB_TARBALL_URL) ; \
fi
DPDK_DOWNLOADS = $(CURDIR)/$(DPDK_TARBALL)
ifeq ($(AESNI),y)
DPDK_DOWNLOADS += $(CURDIR)/$(NASM_TARBALL)
DPDK_DOWNLOADS += $(CURDIR)/$(AESNIMB_LIB_TARBALL)
endif
$(B)/.download.ok: $(DPDK_DOWNLOADS)
@mkdir -p $(B)
@openssl md5 $< | cut -f 2 -d " " - > $(B)/$(DPDK_TARBALL).md5sum
@([ "$$(<$(B)/$(DPDK_TARBALL).md5sum)" = "$(DPDK_$(DPDK_VERSION)_TARBALL_MD5_CKSUM)" ] || \
( echo "Bad Checksum! Please remove $< and retry" && \
rm $(B)/$(DPDK_TARBALL).md5sum && false ))
@touch $@
.PHONY: download
download: $(B)/.download.ok
$(B)/.extract.ok: $(B)/.download.ok
@echo --- extracting $(DPDK_TARBALL) ---
@tar --directory $(B) --extract --file $(CURDIR)/$(DPDK_TARBALL)
ifeq ($(AESNI),y)
@echo --- extracting $(NASM_TARBALL) ---
@tar --directory $(B) --extract --file $(CURDIR)/$(NASM_TARBALL)
@echo --- extracting $(AESNIMB_LIB_TARBALL) ---
@tar --directory $(B) --extract --file $(CURDIR)/$(AESNIMB_LIB_TARBALL)
endif
@touch $@
.PHONY: extract
extract: $(B)/.extract.ok
$(B)/.patch.ok: $(B)/.extract.ok
ifneq ($(wildcard $(CURDIR)/dpdk-$(DPDK_VERSION)_patches/*.patch),)
@echo --- patching ---
@for f in $(CURDIR)/dpdk-$(DPDK_VERSION)_patches/*.patch ; do \
echo Applying patch: $$(basename $$f) ; \
patch -p1 -d $(DPDK_SOURCE) < $$f ; \
done
endif
@touch $@
.PHONY: patch
patch: $(B)/.patch.ok
$(B)/.config.ok: $(B)/.patch.ok $(B)/custom-config
@make $(DPDK_MAKE_ARGS) config
@touch $@
.PHONY: config
config: $(B)/.config.ok
.PHONY: build-nasm
build-nasm:
cd $(NASM_SOURCE) && sh configure && make -j
.PHONY: build-ipsec-mb
build-ipsec-mb:
mkdir -p $(I)/lib/
# Do not build GCM stuff if we are building ISA_L
make -C $(AESNIMB_LIB_SOURCE) -j SHARED=n \
EXTRA_CFLAGS=-fPIC NASM=$(NASM_SOURCE)/nasm
cp $(AESNIMB_LIB_SOURCE)/libIPSec_MB.a $(I)/lib/
.PHONY: build-dpdk
build-dpdk:
@if [ ! -e $(B)/.config.ok ] ; then echo 'Please run "make config" first' && false ; fi
@make $(DPDK_MAKE_ARGS) install
# Order matters
ifeq ($(AESNI),y)
BUILD_TARGETS += build-nasm
BUILD_TARGETS += build-ipsec-mb
endif
BUILD_TARGETS += build-dpdk
$(B)/.build.ok: $(BUILD_TARGETS)
@touch $@
.PHONY: build
build: $(B)/.build.ok
.PHONY: install
install: $(B)/.build.ok
.PHONY: clean
clean:
@rm -rf $(B) $(I)
##############################################################################
# .deb packaging
##############################################################################
DEB_ARCH=$(shell dpkg --print-architecture 2> /dev/null)
DEV_DEB=vpp-dpdk-dev_$(DPDK_VERSION)-$(PKG_SUFFIX)_$(DEB_ARCH).deb
INSTALLED_DEB_VER=$(shell dpkg-query --showformat='$${Version}' --show vpp-dpdk-dev 2> /dev/null)
.PHONY: build-deb install-deb check-deb
deb/debian/changelog: Makefile
@echo "vpp-dpdk ($(DPDK_VERSION)-$(PKG_SUFFIX)) unstable; urgency=low" > $@
@echo "" >> $@
@echo " * DPDK Release $(DPDK_VERSION)" >> $@
@echo "" >> $@
@echo " -- VPP Dev <vpp-dev@lists.fd.io> $(shell date -R)" >> $@
$(DEV_DEB): deb/debian/changelog
@cd deb && dpkg-buildpackage -b -uc -us
git clean -fdx deb
build-deb: $(DEV_DEB)
install-deb:
ifneq ($(INSTALLED_DEB_VER),$(DPDK_VERSION)-$(PKG_SUFFIX))
@echo "=========================================================="
@echo " Out of date DPDK package installed."
@echo " Installed: $(INSTALLED_DEB_VER)"
@echo " Needed: $(DPDK_VERSION)-$(PKG_SUFFIX)"
@echo "=========================================================="
@make $(DEV_DEB)
@sudo dpkg -i $(DEV_DEB)
else
@echo "=========================================================="
@echo " Up-to-date DPDK package already installed"
@echo "=========================================================="
endif
check-deb:
ifneq ($(INSTALLED_DEB_VER),$(DPDK_VERSION)-$(PKG_SUFFIX))
@echo "=========================================================="
@echo " Outdated DPDK package detected:"
@echo " Installed: vpp-dpdk-dev $(INSTALLED_DEB_VER)"
@echo " Current: vpp-dpdk-dev $(DPDK_VERSION)-$(PKG_SUFFIX)"
@echo ""
@echo " Please upgrade by invoking 'make dpdk-install-dev'"
@echo " from the top level directory."
@echo "=========================================================="
endif
##############################################################################
# .rpm packaging
##############################################################################
RPM_ARCH=$(shell rpm --eval "%{_arch}" 2> /dev/null)
DEV_RPM=vpp-dpdk-devel-$(DPDK_VERSION)-$(PKG_SUFFIX).$(RPM_ARCH).rpm
INSTALLED_RPM_VER=$(shell rpm -q --queryformat '%{VERSION}-%{RELEASE}' vpp-dpdk-devel 2> /dev/null | grep -v "not inst")
.PHONY: build-rpm install-rpm check-rpm
$(DEV_RPM): Makefile rpm/vpp-dpdk.spec
@rpmbuild -bb \
--define "_topdir $(CURDIR)/rpm" \
--define "_version $(DPDK_VERSION)" \
--define "_release $(PKG_SUFFIX)" \
$(CURDIR)/rpm/vpp-dpdk.spec
mv rpm/RPMS/$(RPM_ARCH)/*.rpm .
git clean -fdx rpm
build-rpm: $(DEV_RPM)
install-rpm:
ifneq ($(INSTALLED_RPM_VER),$(DPDK_VERSION)-$(PKG_SUFFIX))
@$(MAKE) $(DEV_RPM)
sudo rpm -Uih $(DEV_RPM)
else
@echo "=========================================================="
@echo " Up-to-date DPDK package already installed"
@echo "=========================================================="
endif
check-rpm:
ifneq ($(INSTALLED_RPM_VER),$(DPDK_VERSION)-$(PKG_SUFFIX))
@echo "=========================================================="
@echo " Outdated DPDK package detected:"
@echo " Installed: vpp-dpdk-devel $(INSTALLED_RPM_VER)"
@echo " Current: vpp-dpdk-devel $(DPDK_VERSION)-$(PKG_SUFFIX)"
@echo ""
@echo " Please upgrade by invoking 'make dpdk-install-dev'"
@echo " from the top level directory."
@echo "=========================================================="
endif
##############################################################################
# ebuild support
##############################################################################
.PHONY: ebuild-build ebuild-install
ebuild-build:
ifeq ($(INSTALLED_DEB_VER)$(INSTALLED_RPM_VER),)
@echo "=========================================================="
@echo "Building DPDK from source. Consider installing development"
@echo "package by invoking 'make dpdk-install-dev' from the"
@echo "top level directory"
@echo "=========================================================="
make config
else
ifneq ($(INSTALLED_DEB_VER),)
make check-deb
endif
ifneq ($(INSTALLED_RPM_VER),)
make check-rpm
endif
endif
ebuild-install:
ifeq ($(INSTALLED_DEB_VER)$(INSTALLED_RPM_VER),)
make install
endif
Reference in New Issue View Git Blame Copy Permalink