lunny/qmk_firmware-mirror
1
0
Fork 0
mirror of https://github.com/qmk/qmk_firmware synced 2025-01-03 13:40:36 +00:00
Code Issues Packages Projects Releases Wiki Activity

Merge remote-tracking branch 'origin/master' into develop

Browse Source
This commit is contained in:
Drashna Jael're
2021-12-11 10:28:29 -08:00
parent 31bce31c74 711a608351
commit f92d153532
64 changed files with 2236 additions and 8 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

3
docs/feature_pointing_device.md
View File

@ -150,7 +150,8 @@ The PMW 3360 is an SPI driven optical sensor, that uses a built in IR LED for su
|`PMW3360_SPI_LSBFIRST` | (Optional) Sets the Least/Most Significant Byte First setting for SPI. | `false` |
|`PMW3360_SPI_MODE` | (Optional) Sets the SPI Mode for the sensor. | `3` |
|`PMW3360_SPI_DIVISOR` | (Optional) Sets the SPI Divisor used for SPI communication. | _varies_ |
|`ROTATIONAL_TRANSFORM_ANGLE` | (Optional) Allows for the sensor data to be rotated +/- 127 degrees directly in the sensor. | `0` |
|`PMW3360_LIFTOFF_DISTANCE` | (Optional) Sets the lift off distance at run time | `0x02` |
|`ROTATIONAL_TRANSFORM_ANGLE` | (Optional) Allows for the sensor data to be rotated +/- 30 degrees directly in the sensor. | `0` |
The CPI range is 100-12000, in increments of 100. Defaults to 1600 CPI.

2
drivers/sensors/pmw3360.c
View File

@ -186,6 +186,8 @@ bool pmw3360_init(void) {
spi_write_adv(REG_Angle_Tune, constrain(ROTATIONAL_TRANSFORM_ANGLE, -127, 127));
spi_write_adv(REG_Lift_Config, PMW3360_LIFTOFF_DISTANCE);
bool init_success = pmw3360_check_signature();
writePinLow(PMW3360_CS_PIN);

4
drivers/sensors/pmw3360.h
View File

@ -46,6 +46,10 @@
# endif
#endif
#ifndef PMW3360_LIFTOFF_DISTANCE
# define PMW3360_LIFTOFF_DISTANCE 0x02
#endif
#ifndef ROTATIONAL_TRANSFORM_ANGLE
# define ROTATIONAL_TRANSFORM_ANGLE 0x00
#endif

7
keyboards/kprepublic/bm60hsrgb/readme.md
View File

@ -2,12 +2,15 @@
A 60% hotswap inswitch RGB keyboard from KP Republic.
* Keyboard Maintainer: [MechMerlin](https://github.com/mechmerlin)
* Hardware Supported: BM60HSRGB
* Hardware Availability: [KP Republic](https://kprepublic.com/products/bm60-rgb-60-gh60-hot-swappable-pcb-programmed-qmk-firmware-type-c)
Make example for this keyboard (after setting up your build environment):
make kprepublic/bm60hsrgb/rev1:default
for rev1: make kprepublic/bm60hsrgb/rev1:default
for rev2: make kprepublic/bm60hsrgb/rev2:default
To see which revision you have, look at the PCB. If it says bm60v2 on it, it's rev2. Otherwise it's rev1
See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).

0
keyboards/kprepublic/bm60hsrgb/keymaps/default/keymap.c → keyboards/kprepublic/bm60hsrgb/rev1/keymaps/default/keymap.c
View File

0
keyboards/kprepublic/bm60hsrgb/keymaps/default/readme.md → keyboards/kprepublic/bm60hsrgb/rev1/keymaps/default/readme.md
View File

0
keyboards/kprepublic/bm60hsrgb/keymaps/jbradforddillon/keymap.c → keyboards/kprepublic/bm60hsrgb/rev1/keymaps/jbradforddillon/keymap.c
View File

0
keyboards/kprepublic/bm60hsrgb/keymaps/jbradforddillon/readme.md → keyboards/kprepublic/bm60hsrgb/rev1/keymaps/jbradforddillon/readme.md
View File

0
keyboards/kprepublic/bm60hsrgb/keymaps/via/keymap.c → keyboards/kprepublic/bm60hsrgb/rev1/keymaps/via/keymap.c
View File

0
keyboards/kprepublic/bm60hsrgb/keymaps/via/readme.md → keyboards/kprepublic/bm60hsrgb/rev1/keymaps/via/readme.md
View File

0
keyboards/kprepublic/bm60hsrgb/keymaps/via/rules.mk → keyboards/kprepublic/bm60hsrgb/rev1/keymaps/via/rules.mk
View File

13
keyboards/kprepublic/bm60hsrgb/rev1/readme.md Normal file
View File

@ -0,0 +1,13 @@
# BM60HSRGB
A 60% hotswap inswitch RGB keyboard from KP Republic.
* Keyboard Maintainer: [MechMerlin](https://github.com/mechmerlin)
* Hardware Supported: BM60HSRGB/rev1
* Hardware Availability: [KP Republic](https://kprepublic.com/products/bm60-rgb-60-gh60-hot-swappable-pcb-programmed-qmk-firmware-type-c)
Make example for this keyboard (after setting up your build environment):
make kprepublic/bm60hsrgb/rev1:default
See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).

139
keyboards/kprepublic/bm60hsrgb/rev2/config.h Normal file
View File

@ -0,0 +1,139 @@
/* Copyright 2021 bdtc123
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#pragma once
#include "config_common.h"
/* USB Device descriptor parameter */
#define VENDOR_ID 0x4B50
#define PRODUCT_ID 0x1121
#define DEVICE_VER 0x0002
#define MANUFACTURER KP Republic
#define PRODUCT BM60V2
/* key matrix size */
#define MATRIX_ROWS 5
#define MATRIX_COLS 14
/*
* Keyboard Matrix Assignments
*
* Change this to how you wired your keyboard
* COLS: AVR pins used for columns, left to right
* ROWS: AVR pins used for rows, top to bottom
* DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
* ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
*
*/
#define MATRIX_ROW_PINS { E6, D2, D3, D5, F6 }
#define MATRIX_COL_PINS { B2, B3, B7, B0, B1, F7, D4, D6, D7, B4, B5, B6, C6, C7 }
#define UNUSED_PINS
/* COL2ROW, ROW2COL*/
#define DIODE_DIRECTION ROW2COL
#define USB_POLLING_INTERVAL_MS 1
/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
#define DEBOUNCE 3
/* disable these deprecated features by default */
#define NO_ACTION_MACRO
#define NO_ACTION_FUNCTION
//rgb light setting
#define RGBLIGHT_LIMIT_VAL 150
#define RGBLED_NUM 6
#define RGB_DI_PIN F0
#define RGBLIGHT_ANIMATIONS
#define RGBLIGHT_DEFAULT_MODE RGBLIGHT_MODE_RAINBOW_MOOD
#define RGBLIGHT_HUE_STEP 8
#define RGBLIGHT_SAT_STEP 8
#define RGBLIGHT_VAL_STEP 8
#define RGB_DISABLE_AFTER_TIMEOUT 0 // number of ticks to wait until disabling effects
#define RGB_DISABLE_WHEN_USB_SUSPENDED true // turn off effects when suspended
#define DRIVER_ADDR_1 0b1010000
#define RGB_MATRIX_KEYPRESSES
// RGB Matrix Animation modes. Explicitly enabled
// For full list of effects, see:
// https://docs.qmk.fm/#/feature_rgb_matrix?id=rgb-matrix-effects
#define ENABLE_RGB_MATRIX_ALPHAS_MODS
#define ENABLE_RGB_MATRIX_GRADIENT_LEFT_RIGHT
#define ENABLE_RGB_MATRIX_BREATHING
#define ENABLE_RGB_MATRIX_BAND_VAL
#define ENABLE_RGB_MATRIX_BAND_PINWHEEL_VAL
#define ENABLE_RGB_MATRIX_BAND_SPIRAL_VAL
#define ENABLE_RGB_MATRIX_CYCLE_ALL
#define ENABLE_RGB_MATRIX_CYCLE_LEFT_RIGHT
#define ENABLE_RGB_MATRIX_CYCLE_UP_DOWN
#define ENABLE_RGB_MATRIX_RAINBOW_MOVING_CHEVRON
#define ENABLE_RGB_MATRIX_CYCLE_OUT_IN
#define ENABLE_RGB_MATRIX_CYCLE_OUT_IN_DUAL
#define ENABLE_RGB_MATRIX_CYCLE_PINWHEEL
#define ENABLE_RGB_MATRIX_CYCLE_SPIRAL
#define ENABLE_RGB_MATRIX_DUAL_BEACON
#define ENABLE_RGB_MATRIX_RAINBOW_BEACON
#define ENABLE_RGB_MATRIX_RAINBOW_PINWHEELS
#define ENABLE_RGB_MATRIX_HUE_BREATHING
#define ENABLE_RGB_MATRIX_HUE_PENDULUM
#define ENABLE_RGB_MATRIX_HUE_WAVE
#define ENABLE_RGB_MATRIX_PIXEL_RAIN
#define ENABLE_RGB_MATRIX_PIXEL_FLOW
#define ENABLE_RGB_MATRIX_PIXEL_FRACTAL
// enabled only if RGB_MATRIX_FRAMEBUFFER_EFFECTS is defined
#define ENABLE_RGB_MATRIX_TYPING_HEATMAP
#define ENABLE_RGB_MATRIX_DIGITAL_RAIN
// enabled only of RGB_MATRIX_KEYPRESSES or RGB_MATRIX_KEYRELEASES is defined
#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_SIMPLE
#define ENABLE_RGB_MATRIX_SOLID_REACTIVE
#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_WIDE
#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTIWIDE
#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_CROSS
#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTICROSS
#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_NEXUS
#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTINEXUS
#define ENABLE_RGB_MATRIX_SPLASH
#define ENABLE_RGB_MATRIX_MULTISPLASH
#define ENABLE_RGB_MATRIX_SOLID_SPLASH
#define ENABLE_RGB_MATRIX_SOLID_MULTISPLASH
#define DRIVER_COUNT 2
#define DRIVER_1_LED_TOTAL 63
//#define DRIVER_LED_TOTAL DRIVER_1_LED_TOTAL
#if defined(RGB_MATRIX_ENABLE) && defined(RGBLIGHT_ENABLE)
#define RGB_MATRIX_DISABLE_KEYCODES
#endif
#define RGB_MATRIX_MAXIMUM_BRIGHTNESS 120
#define ISSI_LED_TOTAL DRIVER_1_LED_TOTAL
// Underglow LEDs are WS2812, but someone might want to use RGBLIGHT for them;
// don't use those LEDs in RGB Matrix in that case.
#ifdef RGBLIGHT_ENABLE
# define WS2812_LED_TOTAL 0
#else
# define WS2812_LED_TOTAL 6
#endif
#define DRIVER_LED_TOTAL (ISSI_LED_TOTAL + WS2812_LED_TOTAL)
#ifdef RGB_MATRIX_ENABLE
# define RGB_MATRIX_KEYPRESSES
# define RGB_MATRIX_FRAMEBUFFER_EFFECTS
#endif

78
keyboards/kprepublic/bm60hsrgb/rev2/info.json Normal file
View File

@ -0,0 +1,78 @@
{
"keyboard_name": "bm60v2",
"url": "",
"maintainer": "kp republic",
"layouts": {
"LAYOUT": {
"layout": [
{"x":0, "y":0},
{"x":1, "y":0},
{"x":2, "y":0},
{"x":3, "y":0},
{"x":4, "y":0},
{"x":5, "y":0},
{"x":6, "y":0},
{"x":7, "y":0},
{"x":8, "y":0},
{"x":9, "y":0},
{"x":10, "y":0},
{"x":11, "y":0},
{"x":12, "y":0},
{"x":13, "y":0, "w":2},
{"x":0, "y":1, "w":1.5},
{"x":1.5, "y":1},
{"x":2.5, "y":1},
{"x":3.5, "y":1},
{"x":4.5, "y":1},
{"x":5.5, "y":1},
{"x":6.5, "y":1},
{"x":7.5, "y":1},
{"x":8.5, "y":1},
{"x":9.5, "y":1},
{"x":10.5, "y":1},
{"x":11.5, "y":1},
{"x":12.5, "y":1},
{"x":13.5, "y":1, "w":1.5},
{"x":0, "y":2, "w":1.75},
{"x":1.75, "y":2},
{"x":2.75, "y":2},
{"x":3.75, "y":2},
{"x":4.75, "y":2},
{"x":5.75, "y":2},
{"x":6.75, "y":2},
{"x":7.75, "y":2},
{"x":8.75, "y":2},
{"x":9.75, "y":2},
{"x":10.75, "y":2},
{"x":11.75, "y":2},
{"x":12.75, "y":2, "w":2.25},
{"x":0, "y":3, "w":2.25},
{"x":2.25, "y":3},
{"x":3.25, "y":3},
{"x":4.25, "y":3},
{"x":5.25, "y":3},
{"x":6.25, "y":3},
{"x":7.25, "y":3},
{"x":8.25, "y":3},
{"x":9.25, "y":3},
{"x":10.25, "y":3},
{"x":11.25, "y":3, "w":1.75},
{"x":13, "y":3},
{"x":14, "y":3},
{"x":0, "y":4, "w":1.25},
{"x":1.25, "y":4, "w":1.25},
{"x":2.5, "y":4, "w":1.25},
{"x":3.75, "y":4, "w":6.25},
{"x":10, "y":4},
{"x":11, "y":4},
{"x":12, "y":4},
{"x":13, "y":4},
{"x":14, "y":4}
]
}
}
}

34
keyboards/kprepublic/bm60hsrgb/rev2/keymaps/default/keymap.c Normal file
View File

@ -0,0 +1,34 @@
/* Copyright 2021 bdtc123
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#include QMK_KEYBOARD_H
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
[0] = LAYOUT(
KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC,
KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS,
KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT,
KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_RSFT, KC_UP, KC_SLSH,
KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, MO(1), KC_LEFT, KC_DOWN, KC_RGHT
),
[1] = LAYOUT(
_______, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, RESET,
_______, RGB_TOG, RGB_MOD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, _______, _______, _______, _______, _______,
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
_______, _______, _______, _______, _______, _______, NK_TOGG, _______, _______, _______, _______, _______, _______,
_______, _______, _______, _______, _______, _______, _______, _______, _______
)
};

47
keyboards/kprepublic/bm60hsrgb/rev2/keymaps/via/keymap.c Normal file
View File

@ -0,0 +1,47 @@
/* Copyright 2021 bdtc123
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#include QMK_KEYBOARD_H
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
[0] = LAYOUT(
KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC,
KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS,
KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT,
KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_RSFT, KC_UP, KC_SLSH,
KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, MO(1), KC_LEFT, KC_DOWN, KC_RGHT
),
[1] = LAYOUT(
_______, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, RESET,
_______, RGB_TOG, RGB_MOD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, _______, _______, _______, _______, _______,
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
_______, _______, _______, _______, _______, _______, NK_TOGG, _______, _______, _______, _______, _______, _______,
_______, _______, _______, _______, _______, _______, _______, _______, _______
),
[2] = LAYOUT(
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
_______, _______, _______, _______, _______, _______, _______, _______, _______
),
[3] = LAYOUT(
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
_______, _______, _______, _______, _______, _______, _______, _______, _______
)
};

2
keyboards/kprepublic/bm60hsrgb/rev2/keymaps/via/rules.mk Normal file
View File

@ -0,0 +1,2 @@
VIA_ENABLE = yes
LTO_ENABLE = yes

13
keyboards/kprepublic/bm60hsrgb/rev2/readme.md Normal file
View File

@ -0,0 +1,13 @@
# BM60HSRGB
A 60% hotswap inswitch RGB keyboard from KP Republic.
* Keyboard Maintainer: [bdtc123](https://github.com/bdtc123)
* Hardware Supported: BM60HSRGB/rev2
* Hardware Availability: [KP Republic](https://kprepublic.com/products/bm60-rgb-60-gh60-hot-swappable-pcb-programmed-qmk-firmware-type-c)
Make example for this keyboard (after setting up your build environment):
make kprepublic/bm60hsrgb/rev2:default
See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).

200
keyboards/kprepublic/bm60hsrgb/rev2/rev2.c Normal file
View File

@ -0,0 +1,200 @@
/* Copyright 2021 bdtc123
* Copyright 2021 sigprof
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#include "rev2.h"
#ifdef RGB_MATRIX_ENABLE
# include "i2c_master.h"
# include "is31fl3733.h"
# include "ws2812.h"
const is31_led PROGMEM g_is31_leds[DRIVER_LED_TOTAL] = {
{ 0, B_1, A_1, C_1 },
{ 0, B_2, A_2, C_2 },
{ 0, B_3, A_3, C_3 },
{ 0, B_4, A_4, C_4 },
{ 0, B_5, A_5, C_5 },
{ 0, B_6, A_6, C_6 },
{ 0, B_7, A_7, C_7 },
{ 0, B_8, A_8, C_8 },
{ 0, B_9, A_9, C_9 },
{ 0, B_10, A_10, C_10 },
{ 0, B_11, A_11, C_11 },
{ 0, B_12, A_12, C_12 },
{ 0, B_13, A_13, C_13 },
{ 0, B_14, A_14, C_14 },
{ 0, E_1, D_1, F_1 },
{ 0, E_2, D_2, F_2 },
{ 0, E_3, D_3, F_3 },
{ 0, E_4, D_4, F_4 },
{ 0, E_5, D_5, F_5 },
{ 0, E_6, D_6, F_6 },
{ 0, E_7, D_7, F_7 },
{ 0, E_8, D_8, F_8 },
{ 0, E_9, D_9, F_9 },
{ 0, E_10, D_10, F_10 },
{ 0, E_11, D_11, F_11 },
{ 0, E_12, D_12, F_12 },
{ 0, E_13, D_13, F_13 },
{ 0, E_14, D_14, F_14 },
{ 0, H_1, G_1, I_1 },
{ 0, H_2, G_2, I_2 },
{ 0, H_3, G_3, I_3 },
{ 0, H_4, G_4, I_4 },
{ 0, H_5, G_5, I_5 },
{ 0, H_6, G_6, I_6 },
{ 0, H_7, G_7, I_7 },
{ 0, H_8, G_8, I_8 },
{ 0, H_9, G_9, I_9 },
{ 0, H_10, G_10, I_10 },
{ 0, H_11, G_11, I_11 },
{ 0, H_12, G_12, I_12 },
{ 0, H_14, G_14, I_14 },
{ 0, K_1, J_1, L_1 },
{ 0, K_2, J_2, L_2 },
{ 0, K_3, J_3, L_3 },
{ 0, K_4, J_4, L_4 },
{ 0, K_5, J_5, L_5 },
{ 0, K_6, J_6, L_6 },
{ 0, K_7, J_7, L_7 },
{ 0, K_8, J_8, L_8 },
{ 0, K_9, J_9, L_9 },
{ 0, K_10, J_10, L_10 },
{ 0, K_12, J_12, L_12 },
{ 0, K_13, J_13, L_13 },
{ 0, K_14, J_14, L_14 },
{ 0, H_16, G_16, I_16 },
{ 0, H_15, G_15, I_15 },
{ 0, H_13, G_13, I_13 },
{ 0, E_15, D_15, F_15 },
{ 0, K_15, J_15, L_15 },
{ 0, K_11, J_11, L_11 },
{ 0, K_16, J_16, L_16 },
{ 0, B_16, A_16, C_16 },
{ 0, E_16, D_16, F_16 }
};
led_config_t g_led_config = {
{
{ 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13 },
{ 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27 },
{ 28, 29, 30, 31, 32, 33, 34, 35, 36, 37, 38, 39, NO_LED, 40 },
{ 41, 42, 43, 44, 45, 46, 47, 48, 49, 50, NO_LED, 51, 52, 53 },
{ 54, 55, 56, NO_LED, NO_LED, 57, NO_LED, NO_LED, NO_LED, 58, 59, 60, 61, 62 }
}, {
// Esc, 1, 2, 3, 4, 5, 6, 7, 8, 9, 0, -, =, Backspace
{ 0, 0 }, { 15, 0 }, { 30, 0 }, { 45, 0 }, { 60, 0 }, { 75, 0 }, { 90, 0 }, { 105, 0 }, { 120, 0 }, { 135, 0 }, { 150, 0 }, { 165, 0 }, { 180, 0 }, { 202, 0 },
// Tab, Q, W, E, R, T, Y, U, I, O, P, [, ], ,
{ 7, 16 }, { 22, 16 }, { 37, 16 }, { 52, 16 }, { 67, 16 }, { 82, 16 }, { 97, 16 }, { 112, 16 }, { 127, 16 }, { 142, 16 }, { 157, 16 }, { 172, 16 }, { 187, 16 }, { 206, 16 },
// Capslock, A, S, D, F, G, H, A, K, L, ;, ', Enter
{ 11, 32 }, { 26, 32 }, { 41, 32 }, { 56, 32 }, { 71, 32 }, { 86, 32 }, { 101, 32 }, { 116, 32 }, { 131, 32 }, { 146, 32 }, { 161, 32 }, { 176, 32 }, { 198, 32 },
// LShift, Z, X, C, V, B, N, M, ,, ., /, Shift, Up,
{ 18, 48 }, { 30, 48 }, { 45, 48 }, { 60, 48 }, { 75, 48 }, { 90, 48 }, { 105, 48 }, { 120, 48 }, { 135, 48 }, { 150, 48 }, { 165, 48 }, { 191, 48 }, { 210, 48 },
// Ctrl, GUI, Alt, Space, RAlt, FN, Left, Down, Right
{ 3, 64 }, { 22, 64 }, { 33, 64 }, { 101, 64 }, { 135, 64 }, { 153, 64 }, { 195, 64 }, { 210, 64 }, { 225, 64 }
# if WS2812_LED_TOTAL > 0
,{ 28, 40}, { 62, 40}, { 96, 40}, {130, 40}, {164, 40}, {198, 40}
# endif
}, {
// Esc, 1, 2, 3, 4, 5, 6, 7, 8, 9, 0, -, =, Backspace
4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 1,
// Tab, Q, W, E, R, T, Y, U, I, O, P, [, ],
1, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4,
// Capslock, A, S, D, F, G, H, A, K, L, ;, ', Enter
9, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 1,
// LShift, Z, X, C, V, B, N, M, ,, ., /, Shift, Up, ?
1, 4, 4, 4, 4, 4, 4, 4, 4, 4, 1, 1, 4,
// Ctrl, GUI, Alt, Space, RAlt, FN, Left, Down, Right
1, 1, 1, 4, 1, 1, 1, 1, 1
# if WS2812_LED_TOTAL > 0
,2, 2, 2, 2, 2, 2
# endif
}
};
__attribute__ ((weak))
void rgb_matrix_indicators_user(void) {
if (host_keyboard_led_state().caps_lock) {
rgb_matrix_set_color(28, 0xFF, 0xFF, 0xFF);
}
}
// clang-format on
// ==========================================================================
// Custom RGB Matrix driver that combines IS31FL3733 and WS2812
// ==========================================================================
# if WS2812_LED_TOTAL > 0
LED_TYPE rgb_matrix_ws2812_array[WS2812_LED_TOTAL];
# endif
static void rgb_matrix_driver_init(void) {
i2c_init();
IS31FL3733_init(DRIVER_ADDR_1, 0);
for (uint8_t index = 0; index < ISSI_LED_TOTAL; index++) {
bool enabled = true;
IS31FL3733_set_led_control_register(index, enabled, enabled, enabled);
}
IS31FL3733_update_led_control_registers(DRIVER_ADDR_1, 0);
}
static void rgb_matrix_driver_flush(void) {
IS31FL3733_update_pwm_buffers(DRIVER_ADDR_1, 0);
# if WS2812_LED_TOTAL > 0
ws2812_setleds(rgb_matrix_ws2812_array, WS2812_LED_TOTAL);
# endif
}
static void rgb_matrix_driver_set_color(int index, uint8_t red, uint8_t green, uint8_t blue) {
if (index < ISSI_LED_TOTAL) {
IS31FL3733_set_color(index, red, green, blue);
} else {
# if WS2812_LED_TOTAL > 0
rgb_matrix_ws2812_array[index - ISSI_LED_TOTAL].r = red;
rgb_matrix_ws2812_array[index - ISSI_LED_TOTAL].g = green;
rgb_matrix_ws2812_array[index - ISSI_LED_TOTAL].b = blue;
# endif
}
}
static void rgb_matrix_driver_set_color_all(uint8_t red, uint8_t green, uint8_t blue) {
IS31FL3733_set_color_all(red, green, blue);
# if WS2812_LED_TOTAL > 0
for (uint8_t i = 0; i < WS2812_LED_TOTAL; i++) {
rgb_matrix_ws2812_array[i].r = red;
rgb_matrix_ws2812_array[i].g = green;
rgb_matrix_ws2812_array[i].b = blue;
}
# endif
}
// clang-format off
const rgb_matrix_driver_t rgb_matrix_driver = {
.init = rgb_matrix_driver_init,
.flush = rgb_matrix_driver_flush,
.set_color = rgb_matrix_driver_set_color,
.set_color_all = rgb_matrix_driver_set_color_all,
};
// clang-format on
#endif /* RGB_MATRIX_ENABLE */

32
keyboards/kprepublic/bm60hsrgb/rev2/rev2.h Normal file
View File

@ -0,0 +1,32 @@
/* Copyright 2021 bdtc123
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#pragma once
#include "quantum.h"
#define LAYOUT( \
K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, \
K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, \
K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2D, \
K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3B, K3C, K3D, \
K40, K41, K42, K45, K49, K4A, K4B, K4C, K4D \
) { \
{ K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D }, \
{ K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D }, \
{ K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, KC_NO, K2D }, \
{ K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, KC_NO, K3B, K3C, K3D }, \
{ K40, K41, K42, KC_NO, KC_NO, K45, KC_NO, KC_NO, KC_NO, K49, K4A, K4B, K4C, K4D }, \
}

27
keyboards/kprepublic/bm60hsrgb/rev2/rules.mk Normal file
View File

@ -0,0 +1,27 @@
# MCU name
MCU = atmega32u4
# Bootloader selection
BOOTLOADER = atmel-dfu
# Build Options
# change yes to no to disable
#
BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite
MOUSEKEY_ENABLE = yes # Mouse keys
EXTRAKEY_ENABLE = yes # Audio control and System control
CONSOLE_ENABLE = no # Console for debug
COMMAND_ENABLE = no # Commands for debug and configuration
NKRO_ENABLE = yes # Enable N-Key Rollover
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality
RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow
AUDIO_ENABLE = no # Audio output
NO_USB_STARTUP_CHECK = no
LTO_ENABLE = yes
RGB_MATRIX_ENABLE = yes
RGB_MATRIX_DRIVER = custom
WS2812_DRIVER_REQUIRED = yes
COMMON_VPATH += $(DRIVER_PATH)/led/issi
SRC += is31fl3733.c
QUANTUM_LIB_SRC += i2c_master.c

143
keyboards/mechwild/waka60/config.h Normal file
View File

@ -0,0 +1,143 @@
/*
Copyright 2021 Kyle McCreery
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#pragma once
#include "config_common.h"
/* USB Device descriptor parameter */
#define VENDOR_ID 0x6D77 // mw = "MechWild"
#define PRODUCT_ID 0x1709
#define DEVICE_VER 0x0101
#define MANUFACTURER MechWild
#define PRODUCT Waka60
/* key matrix size */
#define MATRIX_ROWS 10
#define MATRIX_COLS 7
#define EEPROM_I2C_24LC64
/*
* Keyboard Matrix Assignments
*
* Change this to how you wired your keyboard
* COLS: AVR pins used for columns, left to right
* ROWS: AVR pins used for rows, top to bottom
* DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
* ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
*
*/
#define MATRIX_ROW_PINS { B8, B4, B3, B9, A15, B12, B13, B14, B15, A8 }
#define MATRIX_COL_PINS { B10, B1, B0, A7, A6, A5, A4 }
#define UNUSED_PINS
/* encoder pins */
#define ENCODERS_PAD_A { A3 }
#define ENCODERS_PAD_B { A2 }
/* encoder resolution */
#define ENCODER_RESOLUTION 4
#define TAP_CODE_DELAY 10
/* COL2ROW, ROW2COL */
#define DIODE_DIRECTION COL2ROW
/* RGB settings, uncomment this define to enable RGB */
#define RGB_DI_PIN A1
#ifdef RGB_DI_PIN
# define RGBLED_NUM 3
# define RGBLIGHT_HUE_STEP 8
# define RGBLIGHT_SAT_STEP 8
# define RGBLIGHT_VAL_STEP 8
# define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
# define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
#define RGBLIGHT_EFFECT_BREATHING
#define RGBLIGHT_EFFECT_RAINBOW_MOOD
#define RGBLIGHT_EFFECT_RAINBOW_SWIRL
#define RGBLIGHT_EFFECT_SNAKE
#define RGBLIGHT_EFFECT_KNIGHT
#define RGBLIGHT_EFFECT_CHRISTMAS
#define RGBLIGHT_EFFECT_STATIC_GRADIENT
#define RGBLIGHT_EFFECT_RGB_TEST
#define RGBLIGHT_EFFECT_ALTERNATING
#define RGBLIGHT_EFFECT_TWINKLE
/*== customize breathing effect ==*/
/*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
//# define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64
/*==== use exp() and sin() ====*/
//# define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7
//# define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255
#endif
/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
#define DEBOUNCE 5
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
#define LOCKING_RESYNC_ENABLE
/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
* This is useful for the Windows task manager shortcut (ctrl+shift+esc).
*/
//#define GRAVE_ESC_CTRL_OVERRIDE
/*
* Force NKRO
*
* Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
* state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
* makefile for this to work.)
*
* If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
* until the next keyboard reset.
*
* NKRO may prevent your keystrokes from being detected in the BIOS, but it is
* fully operational during normal computer usage.
*
* For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
* or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
* bootmagic, NKRO mode will always be enabled until it is toggled again during a
* power-up.
*
*/
//#define FORCE_NKRO
/*
* Feature disable options
* These options are also useful to firmware size reduction.
*/
/* disable debug print */
//#define NO_DEBUG
/* disable print */
//#define NO_PRINT
/* disable action features */
//#define NO_ACTION_LAYER
//#define NO_ACTION_TAPPING
//#define NO_ACTION_ONESHOT
/* disable these deprecated features by default */
#define NO_ACTION_MACRO
#define NO_ACTION_FUNCTION
/* Bootmagic Lite key configuration */
//#define BOOTMAGIC_LITE_ROW 0
//#define BOOTMAGIC_LITE_COLUMN 0

25
keyboards/mechwild/waka60/f401/halconf.h Normal file
View File

@ -0,0 +1,25 @@
/* Copyright 2021 Kyle McCreery
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#pragma once
#define HAL_USE_I2C TRUE
#define HAL_USE_PWM TRUE
#define HAL_USE_PAL TRUE
#define HAL_USE_GPT TRUE
#include_next <halconf.h>

27
keyboards/mechwild/waka60/f401/mcuconf.h Normal file
View File

@ -0,0 +1,27 @@
/* Copyright 2021 Kyle McCreery
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#pragma once
#include_next <mcuconf.h>
#undef STM32_I2C_USE_I2C1
#define STM32_I2C_USE_I2C1 TRUE
#undef STM32_PWM_USE_TIM1
#define STM32_PWM_USE_TIM1 TRUE
#undef STM32_GPT_USE_TIM4
#define STM32_GPT_USE_TIM4 TRUE

5
keyboards/mechwild/waka60/f401/rules.mk Normal file
View File

@ -0,0 +1,5 @@
# MCU name
MCU = STM32F401
# Bootloader selection
BOOTLOADER = stm32-dfu

22
keyboards/mechwild/waka60/f411/halconf.h Normal file
View File

@ -0,0 +1,22 @@
/* Copyright 2021 Kyle McCreery
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#pragma once
#define HAL_USE_I2C TRUE
#include_next <halconf.h>

23
keyboards/mechwild/waka60/f411/mcuconf.h Normal file
View File

@ -0,0 +1,23 @@
/* Copyright 2021 Kyle McCreery
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#pragma once
#include_next <mcuconf.h>
#undef STM32_I2C_USE_I2C1
#define STM32_I2C_USE_I2C1 TRUE

5
keyboards/mechwild/waka60/f411/rules.mk Normal file
View File

@ -0,0 +1,5 @@
# MCU name
MCU = STM32F411
# Bootloader selection
BOOTLOADER = stm32-dfu

73
keyboards/mechwild/waka60/info.json Normal file
View File

@ -0,0 +1,73 @@
{
"keyboard_name": "MechWild Waka60",
"url": "mechwild.com",
"maintainer": "Kyle McCreery",
"layouts": {
"LAYOUT": {
"layout": [
{"label": "k00", "x": 0, "y": 0},
{"label": "k01", "x": 1, "y": 0},
{"label": "k02", "x": 2, "y": 0},
{"label": "k03", "x": 3, "y": 0},
{"label": "k04", "x": 4, "y": 0},
{"label": "k05", "x": 5, "y": 0},
{"label": "k50", "x": 7, "y": 0},
{"label": "k51", "x": 8, "y": 0},
{"label": "k52", "x": 9, "y": 0},
{"label": "k53", "x": 10, "y": 0},
{"label": "k54", "x": 11, "y": 0},
{"label": "k55", "x": 12, "y": 0},
{"label": "k10", "x": 0, "y": 1},
{"label": "k11", "x": 1, "y": 1},
{"label": "k12", "x": 2, "y": 1},
{"label": "k13", "x": 3, "y": 1},
{"label": "k14", "x": 4, "y": 1},
{"label": "k15", "x": 5, "y": 1},
{"label": "k60", "x": 7, "y": 1},
{"label": "k61", "x": 8, "y": 1},
{"label": "k62", "x": 9, "y": 1},
{"label": "k63", "x": 10, "y": 1},
{"label": "k64", "x": 11, "y": 1},
{"label": "k65", "x": 12, "y": 1},
{"label": "k20", "x": 0, "y": 2},
{"label": "k21", "x": 1, "y": 2},
{"label": "k22", "x": 2, "y": 2},
{"label": "k23", "x": 3, "y": 2},
{"label": "k24", "x": 4, "y": 2},
{"label": "k25", "x": 5, "y": 2},
{"label": "k70", "x": 7, "y": 2},
{"label": "k71", "x": 8, "y": 2},
{"label": "k72", "x": 9, "y": 2},
{"label": "k73", "x": 10, "y": 2},
{"label": "k74", "x": 11, "y": 2},
{"label": "k75", "x": 12, "y": 2},
{"label": "k30", "x": 0, "y": 3},
{"label": "k31", "x": 1, "y": 3},
{"label": "k32", "x": 2, "y": 3},
{"label": "k33", "x": 3, "y": 3},
{"label": "k34", "x": 4, "y": 3},
{"label": "k35", "x": 5, "y": 3},
{"label": "k36", "x": 6, "y": 3},
{"label": "k80", "x": 7, "y": 3},
{"label": "k81", "x": 8, "y": 3},
{"label": "k82", "x": 9, "y": 3},
{"label": "k83", "x": 10, "y": 3},
{"label": "k84", "x": 11, "y": 3},
{"label": "k85", "x": 12, "y": 3},
{"label": "k40", "x": 0, "y": 4},
{"label": "k41", "x": 1, "y": 4},
{"label": "k42", "x": 2, "y": 4},
{"label": "k43", "x": 3, "y": 4},
{"label": "k44", "x": 4, "y": 4},
{"label": "k45", "x": 5, "y": 4},
{"label": "k46", "x": 6, "y": 4},
{"label": "k90", "x": 7, "y": 4},
{"label": "k91", "x": 8, "y": 4},
{"label": "k92", "x": 9, "y": 4},
{"label": "k93", "x": 10, "y": 4},
{"label": "k94", "x": 11, "y": 4},
{"label": "k95", "x": 12, "y": 4}
]
}
}
}

23
keyboards/mechwild/waka60/keymaps/audio/config.h Normal file
View File

@ -0,0 +1,23 @@
/*
Copyright 2021 Kyle McCreery
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#pragma once
#define AUDIO_PIN B5
#define AUDIO_PWM_DRIVER PWMD1
#define AUDIO_PWM_CHANNEL 1
#define AUDIO_STATE_TIMER GPTD4

Some files were not shown because too many files have changed in this diff Show More