format code according to conventions [skip ci]

Add ADC support for STM32F3 and STM32F0 devices (#7681 )
* Add ADC support for STM32F3 and STM32F0 devices * Add section about configration options available to the ARM ADC implementation * Fix STM32 typo
2025-01-07 23:41:41 +00:00 · 2020-03-11 05:11:02 +00:00 · 2020-03-11 15:38:39 +11:00 · 2020-03-11 00:44:20 +00:00 · 2020-03-10 15:10:14 -07:00 · 2020-03-10 13:51:19 -07:00
518 changed files with 22596 additions and 6379 deletions
--- a/build_json.mk
+++ b/build_json.mk
@ -23,4 +23,4 @@ endif

 # Generate the keymap.c
 $(KEYBOARD_OUTPUT)/src/keymap.c: $(KEYMAP_JSON)
-	bin/qmk json-keymap --quiet --output $(KEYMAP_C) $(KEYMAP_JSON)
+	bin/qmk json2c --quiet --output $(KEYMAP_C) $(KEYMAP_JSON)
--- a/common_features.mk
+++ b/common_features.mk
@ -159,7 +159,6 @@ ifeq ($(strip $(RGBLIGHT_ENABLE)), yes)
    SRC += $(QUANTUM_DIR)/color.c
    SRC += $(QUANTUM_DIR)/rgblight.c
    CIE1931_CURVE := yes
-    LED_BREATHING_TABLE := yes
    RGB_KEYCODES_ENABLE := yes
    ifeq ($(strip $(RGBLIGHT_CUSTOM_DRIVER)), yes)
        OPT_DEFS += -DRGBLIGHT_CUSTOM_DRIVER
@ -298,24 +297,27 @@ VALID_BACKLIGHT_TYPES := pwm software custom
 BACKLIGHT_ENABLE ?= no
 BACKLIGHT_DRIVER ?= pwm
 ifeq ($(strip $(BACKLIGHT_ENABLE)), yes)
-    SRC += $(QUANTUM_DIR)/process_keycode/process_backlight.c
    ifeq ($(filter $(BACKLIGHT_DRIVER),$(VALID_BACKLIGHT_TYPES)),)
        $(error BACKLIGHT_DRIVER="$(BACKLIGHT_DRIVER)" is not a valid backlight type)
    endif

    COMMON_VPATH += $(QUANTUM_DIR)/backlight
    SRC += $(QUANTUM_DIR)/backlight/backlight.c
+    SRC += $(QUANTUM_DIR)/process_keycode/process_backlight.c
    OPT_DEFS += -DBACKLIGHT_ENABLE

    ifeq ($(strip $(BACKLIGHT_DRIVER)), custom)
        OPT_DEFS += -DBACKLIGHT_CUSTOM_DRIVER
-    else ifeq ($(strip $(BACKLIGHT_DRIVER)), software)
-        SRC += $(QUANTUM_DIR)/backlight/backlight_soft.c
    else
-        ifeq ($(PLATFORM),AVR)
-            SRC += $(QUANTUM_DIR)/backlight/backlight_avr.c
+        SRC += $(QUANTUM_DIR)/backlight/backlight_driver_common.c
+        ifeq ($(strip $(BACKLIGHT_DRIVER)), pwm)
+            ifeq ($(PLATFORM),AVR)
+                SRC += $(QUANTUM_DIR)/backlight/backlight_avr.c
+            else
+                SRC += $(QUANTUM_DIR)/backlight/backlight_arm.c
+            endif
        else
-            SRC += $(QUANTUM_DIR)/backlight/backlight_arm.c
+            SRC += $(QUANTUM_DIR)/backlight/backlight_$(strip $(BACKLIGHT_DRIVER)).c
        endif
    endif
 endif
@ -351,11 +353,6 @@ ifeq ($(strip $(CIE1931_CURVE)), yes)
    LED_TABLES := yes
 endif

-ifeq ($(strip $(LED_BREATHING_TABLE)), yes)
-    OPT_DEFS += -DUSE_LED_BREATHING_TABLE
-    LED_TABLES := yes
-endif
-
 ifeq ($(strip $(LED_TABLES)), yes)
    SRC += $(QUANTUM_DIR)/led_tables.c
 endif
--- a/docs/README.md
+++ b/docs/README.md
@ -9,24 +9,35 @@

 ## What is QMK Firmware?

-QMK (*Quantum Mechanical Keyboard*) is an open source community that maintains QMK Firmware, QMK Toolbox, qmk.fm, and these docs. QMK Firmware is a keyboard firmware based on the [tmk\_keyboard](http://github.com/tmk/tmk_keyboard) with some useful features for Atmel AVR controllers, and more specifically, the [OLKB product line](http://olkb.com), the [ErgoDox EZ](http://www.ergodox-ez.com) keyboard, and the [Clueboard product line](http://clueboard.co/). It has also been ported to ARM chips using ChibiOS. You can use it to power your own hand-wired or custom keyboard PCB.
+QMK (*Quantum Mechanical Keyboard*) is an open source community centered around developing computer input devices. The community encompasses all sorts of input devices, such as keyboards, mice, and MIDI devices. A core group of collaborators maintains [QMK Firmware](https://github.com/qmk/qmk_firmware), [QMK Configurator](https://config.qmk.fm), [QMK Toolbox](https://github.com/qmk/qmk_toolbox), [qmk.fm](https://qmk.fm), and this documentation with the help of community members like you.

-## How to Get It
+## Get Started

-If you plan on contributing a keymap, keyboard, or features to QMK, the easiest thing to do is [fork the repo through Github](https://github.com/qmk/qmk_firmware#fork-destination-box), and clone your repo locally to make your changes, push them, then open a [Pull Request](https://github.com/qmk/qmk_firmware/pulls) from your fork.
+Totally new to QMK? There are two ways to get started:

-Otherwise, you can clone it directly with `git clone https://github.com/qmk/qmk_firmware`. Do not download the zip or tar files; a git repository is required to download the submodules in order to compile.
+* Basic: [QMK Configurator](https://config.qmk.fm)
+    * Just select your keyboard from the dropdown and program your keyboard.
+    * We have an [introductory video](https://www.youtube.com/watch?v=-imgglzDMdY) you can watch.
+    * There is also an overview [document you can read](newbs_building_firmware_configurator.md).
+* Advanced: [Use The Source](newbs.md)
+    * More powerful, but harder to use

-## How to Compile
+## Make It Yours

-Before you are able to compile, you'll need to [install an environment](getting_started_build_tools.md) for AVR or/and ARM development. Once that is complete, you'll use the `make` command to build a keyboard and keymap with the following notation:
+QMK has lots of [features](features.md) to explore, and a good deal of reference documentation to dig through. Most features are taken advantage of by modifying your [keymap](keymap.md), and changing the [keycodes](keycodes.md).

-    make planck/rev4:default
+## Need help?

-This would build the `rev4` revision of the `planck` with the `default` keymap. Not all keyboards have revisions (also called subprojects or folders), in which case, it can be omitted:
+Check out the [support page](support.md) to see how you can get help using QMK.

-    make preonic:default
+## Give Back

-## How to Customize
+There are a lot of ways you can contribute to the QMK Community. The easiest way to get started is to use it and spread the word to your friends.

-QMK has lots of [features](features.md) to explore, and a good deal of [reference documentation](http://docs.qmk.fm) to dig through. Most features are taken advantage of by modifying your [keymap](keymap.md), and changing the [keycodes](keycodes.md).
+* Help people out on our forums and chat rooms:
+    * [/r/olkb](https://www.reddit.com/r/olkb/)
+    * [Discord Server](https://discord.gg/Uq7gcHh)
+* Contribute to our documentation by clicking "Edit This Page" at the bottom
+* [Translate our documentation into your language](translating.md)
+* [Report a bug](https://github.com/qmk/qmk_firmware/issues/new/choose)
+* [Open a Pull Request](contributing.md)
--- a/docs/_summary.md
+++ b/docs/_summary.md
@ -1,130 +1,162 @@
-* [Complete Newbs Guide](newbs.md)
-  * [Getting Started](newbs_getting_started.md)
+* Tutorial
+  * [Introduction](newbs.md)
+  * [Setup](newbs_getting_started.md)
  * [Building Your First Firmware](newbs_building_firmware.md)
  * [Flashing Firmware](newbs_flashing.md)
  * [Testing and Debugging](newbs_testing_debugging.md)
-  * [Best Git Practices](newbs_git_best_practices.md)
-    * [Using Your Fork's Master](newbs_git_using_your_master_branch.md)
-    * [Resolving Merge Conflicts](newbs_git_resolving_merge_conflicts.md)
-    * [Resynchronizing a Branch](newbs_git_resynchronize_a_branch.md)
-  * [Learning Resources](newbs_learn_more_resources.md)
+  * [Getting Help/Support](support.md)
+  * [Other Resources](newbs_learn_more_resources.md)

-* [QMK Basics](README.md)
-  * [QMK Introduction](getting_started_introduction.md)
-  * [QMK CLI](cli.md)
-  * [QMK CLI Config](cli_configuration.md)
-  * [Contributing to QMK](contributing.md)
-  * [How to Use Github](getting_started_github.md)
-  * [Getting Help](getting_started_getting_help.md)
-
-* [Breaking Changes](breaking_changes.md)
-  * [My Pull Request Was Flagged](breaking_changes_instructions.md)
-  * [2019 Aug 30](ChangeLog/20190830.md)
-
-* [FAQ](faq.md)
+* FAQs
  * [General FAQ](faq_general.md)
  * [Build/Compile QMK](faq_build.md)
  * [Debugging/Troubleshooting QMK](faq_debug.md)
-  * [Keymap](faq_keymap.md)
-  * [Driver Installation with Zadig](driver_installation_zadig.md)
-
-* Detailed Guides
-  * [Install Build Tools](getting_started_build_tools.md)
-  * [Vagrant Guide](getting_started_vagrant.md)
-  * [Build/Compile Instructions](getting_started_make_guide.md)
-  * [Flashing Firmware](flashing.md)
-  * [Customizing Functionality](custom_quantum_functions.md)
-  * [Keymap Overview](keymap.md)
-
-* [Hardware](hardware.md)
-  * [Compatible Microcontrollers](compatible_microcontrollers.md)
-  * [AVR Processors](hardware_avr.md)
-  * [Drivers](hardware_drivers.md)
-
-* Reference
-  * [Keyboard Guidelines](hardware_keyboard_guidelines.md)
-  * [Config Options](config_options.md)
-  * [Keycodes](keycodes.md)
-  * [Coding Conventions - C](coding_conventions_c.md)
-  * [Coding Conventions - Python](coding_conventions_python.md)
-  * [Documentation Best Practices](documentation_best_practices.md)
-  * [Documentation Templates](documentation_templates.md)
+  * [Keymap FAQ](faq_keymap.md)
  * [Glossary](reference_glossary.md)
-  * [Unit Testing](unit_testing.md)
-  * [Useful Functions](ref_functions.md)
-  * [Configurator Support](reference_configurator_support.md)
-  * [info.json Format](reference_info_json.md)
-  * [Python CLI Development](cli_development.md)

-* [Features](features.md)
-  * [Basic Keycodes](keycodes_basic.md)
-  * [US ANSI Shifted Keys](keycodes_us_ansi_shifted.md)
-  * [Quantum Keycodes](quantum_keycodes.md)
-  * [Advanced Keycodes](feature_advanced_keycodes.md)
-  * [Audio](feature_audio.md)
-  * [Auto Shift](feature_auto_shift.md)
-  * [Backlight](feature_backlight.md)
-  * [Bluetooth](feature_bluetooth.md)
-  * [Bootmagic](feature_bootmagic.md)
-  * [Combos](feature_combo.md)
-  * [Command](feature_command.md)
-  * [Debounce API](feature_debounce_type.md)
-  * [DIP Switch](feature_dip_switch.md)
-  * [Dynamic Macros](feature_dynamic_macros.md)
-  * [Encoders](feature_encoders.md)
-  * [Grave Escape](feature_grave_esc.md)
-  * [Haptic Feedback](feature_haptic_feedback.md)
-  * [HD44780 LCD Controller](feature_hd44780.md)
-  * [Key Lock](feature_key_lock.md)
-  * [Layouts](feature_layouts.md)
-  * [Leader Key](feature_leader_key.md)
-  * [LED Matrix](feature_led_matrix.md)
-  * [Macros](feature_macros.md)
-  * [Mouse Keys](feature_mouse_keys.md)
-  * [OLED Driver](feature_oled_driver.md)
-  * [One Shot Keys](feature_advanced_keycodes.md#one-shot-keys)
-  * [Pointing Device](feature_pointing_device.md)
-  * [PS/2 Mouse](feature_ps2_mouse.md)
-  * [RGB Lighting](feature_rgblight.md)
-  * [RGB Matrix](feature_rgb_matrix.md)
-  * [Space Cadet](feature_space_cadet.md)
-  * [Split Keyboard](feature_split_keyboard.md)
-  * [Stenography](feature_stenography.md)
-  * [Swap Hands](feature_swap_hands.md)
-  * [Tap Dance](feature_tap_dance.md)
-  * [Terminal](feature_terminal.md)
-  * [Thermal Printer](feature_thermal_printer.md)
-  * [Unicode](feature_unicode.md)
-  * [Userspace](feature_userspace.md)
-  * [Velocikey](feature_velocikey.md)
+* Configurator
+  * [Overview](newbs_building_firmware_configurator.md)
+  * [Step by Step](configurator_step_by_step.md)
+  * [Troubleshooting](configurator_troubleshooting.md)
+  * [Problems and Bugs](configurator_problems.md)
+  * QMK API
+    * [Overview](api_overview.md)
+    * [API Documentation](api_docs.md)
+    * [Keyboard Support](reference_configurator_support.md)

-* For Makers and Modders
-  * [Hand Wiring Guide](hand_wire.md)
-  * [ISP Flashing Guide](isp_flashing_guide.md)
-  * [ARM Debugging Guide](arm_debugging.md)
-  * [ADC Driver](adc_driver.md)
-  * [I2C Driver](i2c_driver.md)
-  * [WS2812 Driver](ws2812_driver.md)
-  * [EEPROM Driver](eeprom_driver.md)
-  * [GPIO Controls](internals_gpio_control.md)
-  * [Custom Matrix](custom_matrix.md)
-  * [Proton C Conversion](proton_c_conversion.md)
+* CLI
+    * [Overview](cli.md)
+    * [Configuration](cli_configuration.md)
+    * [Commands](cli_commands.md)

-* For a Deeper Understanding
-  * [How Keyboards Work](how_keyboards_work.md)
-  * [Understanding QMK](understanding_qmk.md)
+* Using QMK
+  * Guides
+    * [Customizing Functionality](custom_quantum_functions.md)
+    * [Driver Installation with Zadig](driver_installation_zadig.md)
+    * [Keymap Overview](keymap.md)
+    * [Vagrant Guide](getting_started_vagrant.md)
+    * Flashing
+      * [Flashing](flashing.md)
+      * [Flashing ATmega32A (ps2avrgb)](flashing_bootloadhid.md)
+    * IDEs
+      * [Using Eclipse with QMK](other_eclipse.md)
+      * [Using VSCode with QMK](other_vscode.md)
+    * Git Best Practices
+      * [Introduction](newbs_git_best_practices.md)
+      * [Your Fork](newbs_git_using_your_master_branch.md)
+      * [Merge Conflicts](newbs_git_resolving_merge_conflicts.md)
+      * [Fixing Your Branch](newbs_git_resynchronize_a_branch.md)
+    * Keyboard Building
+      * [Hand Wiring Guide](hand_wire.md)
+      * [ISP Flashing Guide](isp_flashing_guide.md)

-* Other Topics
-  * [Using Eclipse with QMK](other_eclipse.md)
-  * [Using VSCode with QMK](other_vscode.md)
-  * [Support](support.md)
-  * [Translating the QMK Docs](translating.md)
+  * Simple Keycodes
+    * [Full List](keycodes.md)
+    * [Basic Keycodes](keycodes_basic.md)
+    * [Layer Switching](feature_advanced_keycodes.md)
+    * [Quantum Keycodes](quantum_keycodes.md)

-* QMK Internals (In Progress)
-  * [Defines](internals_defines.md)
-  * [Input Callback Reg](internals_input_callback_reg.md)
-  * [Midi Device](internals_midi_device.md)
-  * [Midi Device Setup Process](internals_midi_device_setup_process.md)
-  * [Midi Util](internals_midi_util.md)
-  * [Send Functions](internals_send_functions.md)
-  * [Sysex Tools](internals_sysex_tools.md)
+  * Advanced Keycodes
+    * [Command](feature_command.md)
+    * [Dynamic Macros](feature_dynamic_macros.md)
+    * [Grave Escape](feature_grave_esc.md)
+    * [Leader Key](feature_leader_key.md)
+    * [Mod-Tap](mod_tap.md)
+    * [Macros](feature_macros.md)
+    * [Mouse Keys](feature_mouse_keys.md)
+    * [Space Cadet Shift](feature_space_cadet.md)
+    * [US ANSI Shifted Keys](keycodes_us_ansi_shifted.md)
+
+  * Software Features
+    * [Auto Shift](feature_auto_shift.md)
+    * [Combos](feature_combo.md)
+    * [Debounce API](feature_debounce_type.md)
+    * [Key Lock](feature_key_lock.md)
+    * [One Shot Keys](one_shot_keys.md)
+    * [Pointing Device](feature_pointing_device.md)
+    * [Swap Hands](feature_swap_hands.md)
+    * [Tap Dance](feature_tap_dance.md)
+    * [Tap-Hold Configuration](tap_hold.md)
+    * [Terminal](feature_terminal.md)
+    * [Unicode](feature_unicode.md)
+    * [Userspace](feature_userspace.md)
+
+  * Hardware Features
+    * Displays
+      * [HD44780 LCD Controller](feature_hd44780.md)
+      * [OLED Driver](feature_oled_driver.md)
+    * Lighting
+      * [Backlight](feature_backlight.md)
+      * [LED Matrix](feature_led_matrix.md)
+      * [RGB Lighting](feature_rgblight.md)
+      * [RGB Matrix](feature_rgb_matrix.md)
+    * [Audio](feature_audio.md)
+    * [Bluetooth](feature_bluetooth.md)
+    * [Bootmagic](feature_bootmagic.md)
+    * [Custom Matrix](custom_matrix.md)
+    * [DIP Switch](feature_dip_switch.md)
+    * [Encoders](feature_encoders.md)
+    * [Haptic Feedback](feature_haptic_feedback.md)
+    * [Proton C Conversion](proton_c_conversion.md)
+    * [PS/2 Mouse](feature_ps2_mouse.md)
+    * [Split Keyboard](feature_split_keyboard.md)
+    * [Stenography](feature_stenography.md)
+    * [Thermal Printer](feature_thermal_printer.md)
+    * [Velocikey](feature_velocikey.md)
+
+* Developing QMK
+  * Breaking Changes
+    * [Overview](breaking_changes.md)
+    * [My Pull Request Was Flagged](breaking_changes_instructions.md)
+    * History
+      * [2020 Feb 29](ChangeLog/20200229.md)
+      * [2019 Aug 30](ChangeLog/20190830.md)
+
+  * C Development
+    * [ARM Debugging Guide](arm_debugging.md)
+    * [AVR Processors](hardware_avr.md)
+    * [Coding Conventions](coding_conventions_c.md)
+    * [Compatible Microcontrollers](compatible_microcontrollers.md)
+    * [Drivers](hardware_drivers.md)
+      * [ADC Driver](adc_driver.md)
+      * [I2C Driver](i2c_driver.md)
+      * [WS2812 Driver](ws2812_driver.md)
+      * [EEPROM Driver](eeprom_driver.md)
+    * [GPIO Controls](internals_gpio_control.md)
+    * [Keyboard Guidelines](hardware_keyboard_guidelines.md)
+
+  * Python Development
+    * [Coding Conventions](coding_conventions_python.md)
+    * [QMK CLI Development](cli_development.md)
+    * [QMK CLI Config](cli_dev_configuration.md)
+
+  * Configurator Development
+    * QMK API
+      * [Development Environment](api_development_environment.md)
+      * [Architecture Overview](api_development_overview.md)
+
+  * QMK Reference
+    * [Contributing to QMK](contributing.md)
+    * [Translating the QMK Docs](translating.md)
+    * [Config Options](config_options.md)
+    * [Make Documentation](getting_started_make_guide.md)
+    * [Documentation Best Practices](documentation_best_practices.md)
+    * [Documentation Templates](documentation_templates.md)
+    * [Community Layouts](feature_layouts.md)
+    * [Unit Testing](unit_testing.md)
+    * [Useful Functions](ref_functions.md)
+    * [info.json Format](reference_info_json.md)
+
+  * For a Deeper Understanding
+    * [How Keyboards Work](how_keyboards_work.md)
+    * [How a Matrix Works](how_a_matrix_works.md)
+    * [Understanding QMK](understanding_qmk.md)
+
+  * QMK Internals (In Progress)
+    * [Defines](internals_defines.md)
+    * [Input Callback Reg](internals_input_callback_reg.md)
+    * [Midi Device](internals_midi_device.md)
+    * [Midi Device Setup Process](internals_midi_device_setup_process.md)
+    * [Midi Util](internals_midi_util.md)
+    * [Send Functions](internals_send_functions.md)
+    * [Sysex Tools](internals_sysex_tools.md)
--- a/docs/adc_driver.md
+++ b/docs/adc_driver.md
@ -2,7 +2,7 @@

 QMK can leverage the Analog-to-Digital Converter (ADC) on supported MCUs to measure voltages on certain pins. This can be useful for implementing things such as battery level indicators for Bluetooth keyboards, or volume controls using a potentiometer, as opposed to a [rotary encoder](feature_encoders.md).

-This driver is currently AVR-only. The values returned are 10-bit integers (0-1023) mapped between 0V and VCC (usually 5V or 3.3V).
+This driver currently supports both AVR and a limited selection of ARM devices. On AVR devices, the values returned are 10-bit integers (0-1023) mapped between 0V and VCC (usually 5V or 3.3V). On supported ARM devices, there is more flexibility in control of operation through `#define`s, but by default the values returned are 12-bit integers (0-4095) mapped between 0V and VCC (usually 3.3V).

 ## Usage

@ -20,6 +20,8 @@ Then place this include at the top of your code:

 ## Channels

+### AVR
+
 |Channel|AT90USB64/128|ATmega16/32U4|ATmega32A|ATmega328P|
 |-------|-------------|-------------|---------|----------|
 |0      |`F0`         |`F0`         |`A0`     |`C0`      |
@ -39,8 +41,84 @@ Then place this include at the top of your code:

 <sup>\* The ATmega328P possesses two extra ADC channels; however, they are not present on the DIP pinout, and are not shared with GPIO pins. You can use `adc_read()` directly to gain access to these.</sup>

+### ARM
+
+Note that some of these pins are doubled-up on ADCs with the same channel. This is because the pins can be used for either ADC.
+
+Also note that the F0 and F3 use different numbering schemes. The F0 has a single ADC and the channels are 0-based, whereas the F3 has 4 ADCs and the channels are 1 based. This is because the F0 uses the `ADCv1` implementation of the ADC, whereas the F3 uses the `ADCv3` implementation.
+
+|ADC|Channel|STM32F0XX|STM32F3XX|
+|---|-------|---------|---------|
+|1  |0      |`A0`     |         |
+|1  |1      |`A1`     |`A0`     |
+|1  |2      |`A2`     |`A1`     |
+|1  |3      |`A3`     |`A2`     |
+|1  |4      |`A4`     |`A3`     |
+|1  |5      |`A5`     |`F4`     |
+|1  |6      |`A6`     |`C0`     |
+|1  |7      |`A7`     |`C1`     |
+|1  |8      |`B0`     |`C2`     |
+|1  |9      |`B1`     |`C3`     |
+|1  |10     |`C0`     |`F2`     |
+|1  |11     |`C1`     |         |
+|1  |12     |`C2`     |         |
+|1  |13     |`C3`     |         |
+|1  |14     |`C4`     |         |
+|1  |15     |`C5`     |         |
+|1  |16     |         |         |
+|2  |1      |         |`A4`     |
+|2  |2      |         |`A5`     |
+|2  |3      |         |`A6`     |
+|2  |4      |         |`A7`     |
+|2  |5      |         |`C4`     |
+|2  |6      |         |`C0`     |
+|2  |7      |         |`C1`     |
+|2  |8      |         |`C2`     |
+|2  |9      |         |`C3`     |
+|2  |10     |         |`F2`     |
+|2  |11     |         |`C5`     |
+|2  |12     |         |`B2`     |
+|2  |13     |         |         |
+|2  |14     |         |         |
+|2  |15     |         |         |
+|2  |16     |         |         |
+|3  |1      |         |`B1`     |
+|3  |2      |         |`E9`     |
+|3  |3      |         |`E13`    |
+|3  |4      |         |         |
+|3  |5      |         |         |
+|3  |6      |         |`E8`     |
+|3  |7      |         |`D10`    |
+|3  |8      |         |`D11`    |
+|3  |9      |         |`D12`    |
+|3  |10     |         |`D13`    |
+|3  |11     |         |`D14`    |
+|3  |12     |         |`B0`     |
+|3  |13     |         |`E7`     |
+|3  |14     |         |`E10`    |
+|3  |15     |         |`E11`    |
+|3  |16     |         |`E12`    |
+|4  |1      |         |`E14`    |
+|4  |2      |         |`B12`    |
+|4  |3      |         |`B13`    |
+|4  |4      |         |`B14`    |
+|4  |5      |         |`B15`    |
+|4  |6      |         |`E8`     |
+|4  |7      |         |`D10`    |
+|4  |8      |         |`D11`    |
+|4  |9      |         |`D12`    |
+|4  |10     |         |`D13`    |
+|4  |11     |         |`D14`    |
+|4  |12     |         |`D8`     |
+|4  |13     |         |`D9`     |
+|4  |14     |         |         |
+|4  |15     |         |         |
+|4  |16     |         |         |
+
 ## Functions

+### AVR
+
 |Function                    |Description                                                                                                        |
 |----------------------------|-------------------------------------------------------------------------------------------------------------------|
 |`analogReference(mode)`     |Sets the analog voltage reference source. Must be one of `ADC_REF_EXTERNAL`, `ADC_REF_POWER` or `ADC_REF_INTERNAL`.|
@ -48,3 +126,28 @@ Then place this include at the top of your code:
 |`analogReadPin(pin)`        |Reads the value from the specified QMK pin, eg. `F6` for ADC6 on the ATmega32U4.                                   |
 |`pinToMux(pin)`             |Translates a given QMK pin to a mux value. If an unsupported pin is given, returns the mux value for "0V (GND)".   |
 |`adc_read(mux)`             |Reads the value from the ADC according to the specified mux. See your MCU's datasheet for more information.        |
+
+### ARM
+
+Note that care was taken to match all of the functions used for AVR devices, however complications in the ARM platform prevent that from always being possible. For example, the `STM32` chips do not have assigned Arduino pins. We could use the default pin numbers, but those numbers change based on the package type of the device. For this reason, please specify your target pins with their identifiers (`A0`, `F3`, etc.). Also note that there are some variants of functions that accept the target ADC for the pin. Some pins can be used for multiple ADCs, and this specified can help you pick which ADC will be used to interact with that pin.
+
+|Function                    |Description                                                                                                         |
+|----------------------------|--------------------------------------------------------------------------------------------------------------------|
+|`analogReadPin(pin)`        |Reads the value from the specified QMK pin, eg. `A0` for channel 0 on the STM32F0 and ADC1 channel 1 on the STM32F3. Note that if a pin can be used for multiple ADCs, it will pick the lower numbered ADC for this function. eg. `C0` will be channel 6 of ADC 1 when it could be used for ADC 2 as well.|
+|`analogReadPinAdc(pin, adc)`|Reads the value from the specified QMK pin and ADC, eg. `C0, 1` will read from channel 6, ADC 2 instead of ADC 1. Note that the ADCs are 0-indexed for this function.|
+|`pinToMux(pin)`             |Translates a given QMK pin to a channel and ADC combination. If an unsupported pin is given, returns the mux value for "0V (GND)".|
+|`adc_read(mux)`             |Reads the value from the ADC according to the specified pin and adc combination. See your MCU's datasheet for more information.|
+
+## Configuration
+
+## ARM
+
+The ARM implementation of the ADC has a few additional options that you can override in your own keyboards and keymaps to change how it operates.
+
+|`#define`          |Type  |Default              |Description|
+|-------------------|------|---------------------|-----------|
+|ADC_CIRCULAR_BUFFER|`bool`|`false`              |If `TRUE`, then the implementation will use a circular buffer.|
+|ADC_NUM_CHANNELS   |`int` |`1`                  |Sets the number of channels that will be scanned as part of an ADC operation. The current implementation only supports `1`.|
+|ADC_BUFFER_DEPTH   |`int` |`2`                  |Sets the depth of each result. Since we are only getting a 12-bit result by default, we set this to `2` bytes so we can contain our one value. This could be set to 1 if you opt for a 8-bit or lower result.|
+|ADC_SAMPLING_RATE  |`int` |`ADC_SMPR_SMP_1P5`   |Sets the sampling rate of the ADC. By default, it is set to the fastest setting. Please consult the corresponding `hal_adc_lld.h` in ChibiOS for your specific microcontroller for further documentation on your available options.|
+|ADC_RESOLUTION     |`int` |`ADC_CFGR1_RES_12BIT`|The resolution of your result. We choose 12 bit by default, but you can opt for 12, 10, 8, or 6 bit. Please consult the corresponding `hal_adc_lld.h` in ChibiOS for your specific microcontroller for further documentation on your available options.|
--- a/docs/api_development_environment.md
+++ b/docs/api_development_environment.md
@ -0,0 +1,3 @@
+# Development Environment Setup
+
+To setup a development stack head over to the [qmk_web_stack](https://github.com/qmk/qmk_web_stack).
--- a/docs/api_development_overview.md
+++ b/docs/api_development_overview.md
@ -0,0 +1,44 @@
+# QMK Compiler Development Guide
+
+This page attempts to introduce developers to the QMK Compiler. It does not go into nitty gritty details- for that you should read code. What this will give you is a framework to hang your understanding on as you read the code.
+
+# Overview
+
+The QMK Compile API consists of a few movings parts:
+
+![Architecture Diagram](https://raw.githubusercontent.com/qmk/qmk_api/master/docs/architecture.svg)
+
+API Clients interact exclusively with the API service. This is where they submit jobs, check status, and download results. The API service inserts compile jobs into [Redis Queue](https://python-rq.org) and checks both RQ and S3 for the results of those jobs.
+
+Workers fetch new compile jobs from RQ, compile them, and then upload the source and the binary to an S3 compatible storage engine.
+
+# Workers
+
+QMK Compiler Workers are responsible for doing the actual building. When a worker pulls a job from RQ it does several things to complete that job:
+
+* Make a fresh qmk_firmware checkout
+* Use the supplied layers and keyboard metadata to build a `keymap.c`
+* Build the firmware
+* Zip a copy of the source
+* Upload the firmware, source zip, and a metadata file to S3.
+* Report the status of the job to RQ
+
+# API Service
+
+The API service is a relatively simple Flask application. There are a few main views you should understand.
+
+## @app.route('/v1/compile', methods=['POST'])
+
+This is the main entrypoint for the API. A client's interaction starts here. The client POST's a JSON document describing their keyboard, and the API does some (very) basic validation of that JSON before submitting the compile job.
+
+## @app.route('/v1/compile/&lt;string:job_id&gt;', methods=['GET'])
+
+This is the most frequently called endpoint. It pulls the job details from redis, if they're still available, or the cached job details on S3 if they're not.
+
+## @app.route('/v1/compile/&lt;string:job_id&gt;/download', methods=['GET'])
+
+This method allows users to download the compiled firmware file.
+
+## @app.route('/v1/compile/&lt;string:job_id&gt;/source', methods=['GET'])
+
+This method allows users to download the source for their firmware.
--- a/docs/api_docs.md
+++ b/docs/api_docs.md
@ -0,0 +1,68 @@
+# QMK API
+
+This page describes using the QMK API. If you are an application developer you can use this API to compile firmware for any [QMK](https://qmk.fm) Keyboard.
+
+## Overview
+
+This service is an asynchronous API for compiling custom keymaps. You POST some JSON to the API, periodically check the status, and when your firmware has finished compiling you can download the resulting firmware and (if desired) source code for that firmware.
+
+#### Example JSON Payload:
+
+```json
+{
+  "keyboard": "clueboard/66/rev2",
+  "keymap": "my_awesome_keymap",
+  "layout": "LAYOUT_all",
+  "layers": [
+    ["KC_GRV","KC_1","KC_2","KC_3","KC_4","KC_5","KC_6","KC_7","KC_8","KC_9","KC_0","KC_MINS","KC_EQL","KC_GRV","KC_BSPC","KC_PGUP","KC_TAB","KC_Q","KC_W","KC_E","KC_R","KC_T","KC_Y","KC_U","KC_I","KC_O","KC_P","KC_LBRC","KC_RBRC","KC_BSLS","KC_PGDN","KC_CAPS","KC_A","KC_S","KC_D","KC_F","KC_G","KC_H","KC_J","KC_K","KC_L","KC_SCLN","KC_QUOT","KC_NUHS","KC_ENT","KC_LSFT","KC_NUBS","KC_Z","KC_X","KC_C","KC_V","KC_B","KC_N","KC_M","KC_COMM","KC_DOT","KC_SLSH","KC_RO","KC_RSFT","KC_UP","KC_LCTL","KC_LGUI","KC_LALT","KC_MHEN","KC_SPC","KC_SPC","KC_HENK","KC_RALT","KC_RCTL","MO(1)","KC_LEFT","KC_DOWN","KC_RIGHT"],
+    ["KC_ESC","KC_F1","KC_F2","KC_F3","KC_F4","KC_F5","KC_F6","KC_F7","KC_F8","KC_F9","KC_F10","KC_F11","KC_F12","KC_TRNS","KC_DEL","BL_STEP","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","_______","KC_TRNS","KC_PSCR","KC_SLCK","KC_PAUS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","MO(2)","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_PGUP","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","MO(1)","KC_LEFT","KC_PGDN","KC_RGHT"],
+    ["KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","RESET","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","MO(2)","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","MO(1)","KC_TRNS","KC_TRNS","KC_TRNS"]
+  ]
+}
+```
+
+As you can see the payload describes all aspects of a keyboard necessary to create and generate a firmware. Each layer is a single list of QMK keycodes the same length as the keyboard's `LAYOUT` macro. If a keyboard supports mulitple `LAYOUT` macros you can specify which macro to use.
+
+## Submitting a Compile Job
+
+To compile your keymap into a firmware simply POST your JSON to the `/v1/compile` endpoint. In the following example we've placed the JSON payload into a file named `json_data`.
+
+```
+$ curl -H "Content-Type: application/json" -X POST -d "$(< json_data)" http://api.qmk.fm/v1/compile
+{
+  "enqueued": true,
+  "job_id": "ea1514b3-bdfc-4a7b-9b5c-08752684f7f6"
+}
+```
+
+## Checking The Status
+
+After submitting your keymap you can check the status using a simple HTTP GET call:
+
+```
+$ curl http://api.qmk.fm/v1/compile/ea1514b3-bdfc-4a7b-9b5c-08752684f7f6
+{
+  "created_at": "Sat, 19 Aug 2017 21:39:12 GMT",
+  "enqueued_at": "Sat, 19 Aug 2017 21:39:12 GMT",
+  "id": "f5f9b992-73b4-479b-8236-df1deb37c163",
+  "status": "running",
+  "result": null
+}
+```
+
+This shows us that the job has made it through the queue and is currently running. There are 5 possible statuses:
+
+* **failed**: Something about the compiling service has broken.
+* **finished**: The compilation is complete and you should check `result` to see the results.
+* **queued**: The keymap is waiting for a compilation server to become available.
+* **running**: The compilation is in progress and should be complete soon.
+* **unknown**: A serious error has occurred and you should [file a bug](https://github.com/qmk/qmk_compiler/issues).
+
+## Examining Finished Results
+
+Once your compile job has finished you'll check the `result` key. The value of this key is a hash containing several key bits of information:
+
+* `firmware_binary_url`: A list of URLs for the the flashable firmware
+* `firmware_keymap_url`: A list of URLs for the the `keymap.c`
+* `firmware_source_url`: A list of URLs for the full firmware source code
+* `output`: The stdout and stderr for this compile job. Errors will be found here.
--- a/docs/api_overview.md
+++ b/docs/api_overview.md
@ -0,0 +1,15 @@
+# QMK API
+
+The QMK API provides an asynchronous API that Web and GUI tools can use to compile arbitrary keymaps for any keyboard supported by [QMK](http://qmk.fm/). The stock keymap template supports all QMK keycodes that do not require supporting C code. Keyboard maintainers can supply their own custom templates to enable more functionality.
+
+## App Developers
+
+If you are an app developer interested in using this API in your application you should head over to [Using The API](api_docs.md).
+
+## Keyboard Maintainers
+
+If you would like to enhance your keyboard's support in the QMK Compiler API head over to the [Keyboard Support](reference_configurator_support.md) section.
+
+## Backend Developers
+
+If you are interested in working on the API itself you should start by setting up a [Development Environment](api_development_environment.md), then check out [Hacking On The API](api_development_overview.md).
--- a/docs/becoming_a_qmk_collaborator.md
+++ b/docs/becoming_a_qmk_collaborator.md
@ -1,9 +0,0 @@
-# Becoming a QMK Collaborator
-
-A QMK collaborator is a keyboard maker or designer that is interested in helping QMK grow and fully support their keyboard(s), and encouraging their users and customers to submit features, ideas, and keymaps. We're always looking to add more keyboards and collaborators, but we ask that they fulfill these requirements:
-
-* **Have a PCB available for sale.** Unfortunately there's just too much variation and complications with handwired keyboards.
-* **Maintain your keyboard in QMK.** This may just require an initial setup to get your keyboard working, but it could also include accommodating changes made to QMK's core that might break or render any custom code redundant.
-* **Approve and merge keymap pull requests for your keyboard.** We like to encourage users to contribute their keymaps for others to see and work from when creating their own.
-
-If you feel you meet these requirements, shoot us an email at hello@qmk.fm with an introduction and some links to your keyboard!
--- a/docs/cli.md
+++ b/docs/cli.md
@ -167,8 +167,7 @@ $ qmk compile -kb dz60
 ## `qmk flash`

 This command is similar to `qmk compile`, but can also target a bootloader. The bootloader is optional, and is set to `:flash` by default.
-To specify a different bootloader, use `-bl <bootloader>`. Visit <https://docs.qmk.fm/#/flashing>
-for more details of the available bootloaders.
+To specify a different bootloader, use `-bl <bootloader>`. Visit the [Flashing Firmware](flashing.md) guide for more details of the available bootloaders.

 **Usage for Configurator Exports**:

@ -232,14 +231,14 @@ Check your environment and report problems only:

    qmk doctor -n

-## `qmk json-keymap`
+## `qmk json2c`

 Creates a keymap.c from a QMK Configurator export.

 **Usage**:

 ```
-qmk json-keymap [-o OUTPUT] filename
+qmk json2c [-o OUTPUT] filename
 ```

 ## `qmk kle2json`
--- a/docs/cli_dev_configuration.md
+++ b/docs/cli_dev_configuration.md
@ -4,7 +4,7 @@ This document explains how `qmk config` works.

 # Introduction

-Configuration for QMK CLI is a key/value system. Each key consists of a subcommand and an argument name separated by a period. This allows for a straightforward and direct translation between config keys and the arguments they set.
+Configuration for the QMK CLI is a key/value system. Each key consists of a subcommand and an argument name separated by a period. This allows for a straightforward and direct translation between config keys and the arguments they set.

 ## Simple Example

--- a/docs/config_options.md
+++ b/docs/config_options.md
@ -136,22 +136,22 @@ If you define these options you will enable the associated feature, which may in
  * enables handling for per key `TAPPING_TERM` settings
 * `#define RETRO_TAPPING`
  * tap anyway, even after TAPPING_TERM, if there was no other key interruption between press and release
-  * See [Retro Tapping](feature_advanced_keycodes.md#retro-tapping) for details
+  * See [Retro Tapping](tap_hold.md#retro-tapping) for details
 * `#define TAPPING_TOGGLE 2`
  * how many taps before triggering the toggle
 * `#define PERMISSIVE_HOLD`
  * makes tap and hold keys trigger the hold if another key is pressed before releasing, even if it hasn't hit the `TAPPING_TERM`
-  * See [Permissive Hold](feature_advanced_keycodes.md#permissive-hold) for details
+  * See [Permissive Hold](tap_hold.md#permissive-hold) for details
 * `#define PERMISSIVE_HOLD_PER_KEY`
  * enabled handling for per key `PERMISSIVE_HOLD` settings
 * `#define IGNORE_MOD_TAP_INTERRUPT`
  * makes it possible to do rolling combos (zx) with keys that convert to other keys on hold, by enforcing the `TAPPING_TERM` for both keys.
-  * See [Mod tap interrupt](feature_advanced_keycodes.md#ignore-mod-tap-interrupt) for details
+  * See [Ignore Mod Tap Interrupt](tap_hold.md#ignore-mod-tap-interrupt) for details
 * `#define IGNORE_MOD_TAP_INTERRUPT_PER_KEY`
  * enables handling for per key `IGNORE_MOD_TAP_INTERRUPT` settings
 * `#define TAPPING_FORCE_HOLD`
  * makes it possible to use a dual role key as modifier shortly after having been tapped
-  * See [Hold after tap](feature_advanced_keycodes.md#tapping-force-hold)
+  * See [Tapping Force Hold](tap_hold.md#tapping-force-hold)
  * Breaks any Tap Toggle functionality (`TT` or the One Shot Tap Toggle)
 * `#define TAPPING_FORCE_HOLD_PER_KEY`
  * enables handling for per key `TAPPING_FORCE_HOLD` settings
@ -190,6 +190,8 @@ If you define these options you will enable the associated feature, which may in
  * pin the DI on the WS2812 is hooked-up to
 * `#define RGBLIGHT_ANIMATIONS`
  * run RGB animations
+* `#define RGBLIGHT_LAYERS`
+  * Lets you define [lighting layers](feature_rgblight.md) that can be toggled on or off. Great for showing the current keyboard layer or caps lock state.
 * `#define RGBLED_NUM 12`
  * number of LEDs
 * `#define RGBLIGHT_SPLIT`
@ -335,7 +337,7 @@ This is a [make](https://www.gnu.org/software/make/manual/make.html) file that i
  * `bootloadHID`
  * `USBasp`

-## Feature Options
+## Feature Options :id=feature-options

 Use these to enable or disable building certain features. The more you have enabled the bigger your firmware will be, and you run the risk of building a firmware too large for your MCU.

--- a/docs/configurator_step_by_step.md
+++ b/docs/configurator_step_by_step.md
@ -0,0 +1,58 @@
+# QMK Configurator: Step by Step
+
+This page describes the steps for building your firmware in QMK Configurator.
+
+## Step 1: Select Your Keyboard
+
+Click the drop down box and select the keyboard you want to create a keymap for.
+
+?> If your keyboard has several versions, make sure you select the correct one.
+
+I'll say that again because it's important:
+
+!> **MAKE SURE YOU SELECT THE RIGHT VERSION!**
+
+If your keyboard has been advertised to be powered by QMK but is not in the list, chances are a developer hasn't gotten to it yet or we haven't had a chance to merge it in yet. File an issue at [qmk_firmware](https://github.com/qmk/qmk_firmware/issues) requesting to support that particular keyboard, if there is no active [Pull Request](https://github.com/qmk/qmk_firmware/pulls?q=is%3Aopen+is%3Apr+label%3Akeyboard) for it. There are also QMK powered keyboards that are in their manufacturer's own github accounts. Double check for that as well.  <!-- FIXME(skullydazed): This feels too wordy and I'm not sure we want to encourage these kinds of issues. Also, should we prompt them to bug the manufacutrer? -->
+
+## Step 2: Select Your Keyboard Layout
+
+Choose the layout that best represents the keymap you want to create. Some keyboards do not have enough layouts or correct layouts defined yet. They will be supported in the future.
+
+!> Sometimes there isn't a layout that supports your exact build. In that case select `LAYOUT_all`.
+
+## Step 3: Name Your Keymap
+
+Call this keymap what you want.
+
+?> If you are running into issues when compiling, it may be worth changing this name, as it may already exist in the QMK Firmware repo.
+
+## Step 4: Define Your Keymap
+
+Keycode Entry is accomplished in one of 3 ways:
+
+1. Drag and drop
+2. Clicking on an empty spot on the layout, then clicking the keycode you desire
+3. Clicking on an empty spot on the layout, then pressing the physical key on your keyboard
+
+?> Hover your mouse over a key and a short blurb will tell you what that keycode does. For a more verbose description please see:
+
+* [Basic Keycode Reference](keycodes_basic.md)
+* [Advanced Keycode Reference](feature_advanced_keycodes.md)
+
+!> If your selected layout doesn't match your physical build leave the unused keys blank. If you're not sure which key is in use, for example you have a one backspace key but `LAYOUT_all` has 2 keys, put the same keycode in both locations.
+
+## Step 5: Save Your Keymap for Future Changes
+
+When you're satisfied with your keymap or just want to work on it later, press the `Export Keymap` button. It will save your keymap to your computer. You can then load this .json file in the future by pressing the `Import Keymap` button.
+
+!> **CAUTION:** This is not the same type of .json file used for kbfirmware.com or any other tool. If you try to use this for those tools, or the .json from those tools with QMK Configurator, you will encounter problems.
+
+## Step 6: Compile Your Firmware File
+
+Press the green `Compile` button.
+
+When the compilation is done, you will be able to press the green `Download Firmware` button.
+
+## Next steps: Flashing Your Keyboard
+
+Please refer to [Flashing Firmware](newbs_flashing.md).
--- a/docs/configurator_troubleshooting.md
+++ b/docs/configurator_troubleshooting.md
@ -0,0 +1,26 @@
+# Configurator Troubleshooting
+
+## My .json file is not working
+
+If the .json file was generated with QMK Configurator, congratulations you have stumbled upon a bug. File an issue at [qmk_configurator](https://github.com/qmk/qmk_configurator/issues).
+
+If not... how did you miss the big bold message at the top saying not to use other .json files?
+
+## There are extra spaces in my layout? What do I do?
+
+If you're referring to having three spots for space bar, the best course of action is to just fill them all with Space. The same can be done for Backspace and Shift keys.
+
+## What is the keycode for...
+
+Please see:
+
+* [Basic Keycode Reference](keycodes_basic.md)
+* [Advanced Keycode Reference](feature_advanced_keycodes.md)
+
+## It won't compile
+
+Please double check the other layers of your keymap to make sure there are no random keys present.
+
+## Problems and Bugs
+
+We are always accepting customer requests and bug reports. Please file them at [qmk_configurator](https://github.com/qmk/qmk_configurator/issues).
--- a/docs/contributing.md
+++ b/docs/contributing.md
@ -101,7 +101,7 @@ enum my_keycodes {
 };
 ```

-### Previewing the Documentation
+### Previewing the Documentation :id=previewing-the-documentation

 Before opening a pull request, you can preview your changes if you have set up the development environment by running this command from the `qmk_firmware/` folder:

--- a/docs/custom_quantum_functions.md
+++ b/docs/custom_quantum_functions.md
@ -4,7 +4,7 @@ For a lot of people a custom keyboard is about more than sending button presses

 This page does not assume any special knowledge about QMK, but reading [Understanding QMK](understanding_qmk.md) will help you understand what is going on at a more fundamental level.

-## A Word on Core vs Keyboards vs Keymap
+## A Word on Core vs Keyboards vs Keymap :id=a-word-on-core-vs-keyboards-vs-keymap

 We have structured QMK as a hierarchy:

@ -34,7 +34,7 @@ enum my_keycodes {
 };
 ```

-## Programming the Behavior of Any Keycode
+## Programming the Behavior of Any Keycode :id=programming-the-behavior-of-any-keycode

 When you want to override the behavior of an existing key, or define the behavior for a new key, you should use the `process_record_kb()` and `process_record_user()` functions. These are called by QMK during key processing before the actual key event is handled. If these functions return `true` QMK will process the keycodes as usual. That can be handy for extending the functionality of a key rather than replacing it. If these functions return `false` QMK will skip the normal key handling, and it will be up to you to send any key up or down events that are required.

@ -313,7 +313,7 @@ void suspend_wakeup_init_user(void) {
 * Keyboard/Revision: `void suspend_power_down_kb(void)` and `void suspend_wakeup_init_user(void)`
 * Keymap: `void suspend_power_down_kb(void)` and `void suspend_wakeup_init_user(void)`

-# Layer Change Code
+# Layer Change Code :id=layer-change-code

 This runs code every time that the layers get changed.  This can be useful for layer indication, or custom layer handling.

--- a/docs/de/_summary.md
+++ b/docs/de/_summary.md
@ -77,7 +77,7 @@
  * [Macros](de/feature_macros.md)
  * [Mouse Keys](de/feature_mouse_keys.md)
  * [OLED Driver](de/feature_oled_driver.md)
-  * [One Shot Keys](de/feature_advanced_keycodes.md#one-shot-keys)
+  * [One Shot Keys](de/one_shot_keys.md)
  * [Pointing Device](de/feature_pointing_device.md)
  * [PS/2 Mouse](de/feature_ps2_mouse.md)
  * [RGB Lighting](de/feature_rgblight.md)
@ -108,7 +108,7 @@
 * Andere Themen
  * [Eclipse mit QMK](de/other_eclipse.md)
  * [VSCode mit QMK](de/other_vscode.md)
-  * [Support](de/support.md)
+  * [Support](de/getting_started_getting_help.md)
  * [Übersetzungen](de/translating.md)

 * QMK Internals (In Progress)
--- a/docs/documentation_templates.md
+++ b/docs/documentation_templates.md
@ -2,7 +2,7 @@

 This page documents the templates you should use when submitting new Keymaps and Keyboards to QMK.

-## Keymap `readme.md` Template
+## Keymap `readme.md` Template :id=keyboard-readmemd-template

 Most keymaps have an image depicting the layout. You can use [Keyboard Layout Editor](http://keyboard-layout-editor.com) to create an image. Upload it to [Imgur](http://imgur.com) or another hosting service, please do not include images in your Pull Request.

--- a/docs/es/_summary.md
+++ b/docs/es/_summary.md
@ -77,7 +77,7 @@
  * [Macros](es/feature_macros.md)
  * [Teclas del ratón](es/feature_mouse_keys.md)
  * [Driver OLED](es/feature_oled_driver.md)
-  * [Teclas One Shot](es/feature_advanced_keycodes.md#one-shot-keys)
+  * [Teclas One Shot](es/one_shot_keys.md)
  * [Dispositivo de apuntado](es/feature_pointing_device.md)
  * [Ratón PS/2](es/feature_ps2_mouse.md)
  * [Iluminación RGB](es/feature_rgblight.md)
@ -108,7 +108,7 @@
 * Otros temas
  * [Usando Eclipse con QMK](es/other_eclipse.md)
  * [Usando VSCode con QMK](es/other_vscode.md)
-  * [Soporte](es/support.md)
+  * [Soporte](es/getting_started_getting_help.md)
  * [Cómo añadir traducciones](es/translating.md)

 * QMK Internals (En progreso)
--- a/docs/es/becoming_a_qmk_collaborator.md
+++ b/docs/es/becoming_a_qmk_collaborator.md
@ -1,9 +0,0 @@
-# Llegar a ser un colaborador QMK
-
-Un colaborador QMK es un maker o diseñador de teclados que tiene interés en ayudar a QMK a crecer y mantener sus teclado(s), y alentar a los usuarios y clientes a presentar herramientas, ideas, y keymaps. Siempre procuramos agregar más teclados y colaboradores, pero pedimos que cumplan los siguientes requisitos:
-
-* **Tener un PCB disponible a la venta.** Desafortunadamente, hay demasiada variación y complicaciones con teclados cableados a mano.
-* **Realizar el mantenimiento de tu teclado en QMK.** Este podría requirir un setup inicial para hacer que tu teclado funcione, pero también podría incluir adaptarse a cambios hecho al base de QMK que podrían descomponer o rendir código superfluo.
-* **Aprobar e incorporar pull requests de keymaps para tu teclado.** Nos gusta alentar a los usuarios a contribuir sus keymaps para que otros los vean y los puedan usar para crear sus propios.
-
-Si sientes que cumples los requisitos, ¡mándanos un email a hello@qmk.fm con una introducción y algunos enlaces para tu teclado!
--- a/docs/es/newbs_building_firmware_configurator.md
+++ b/docs/es/newbs_building_firmware_configurator.md
@ -4,7 +4,7 @@ El [Configurador QMK](https://config.qmk.fm) es un entorno gráfico online que g

 ?> **Por favor sigue estos pasos en orden.**

-Ve el [Video tutorial](https://youtu.be/tx54jkRC9ZY)
+Ve el [Video tutorial](https://www.youtube.com/watch?v=-imgglzDMdY)

 El Configurador QMK functiona mejor con Chrome/Firefox. 

--- a/docs/faq.md
+++ b/docs/faq.md
@ -1,6 +0,0 @@
-# Frequently Asked Questions
-
-* [General](faq_general.md)
-* [Building or Compiling QMK](faq_build.md)
-* [Debugging and Troubleshooting QMK](faq_debug.md)
-* [Keymap](faq_keymap.md)
--- a/docs/faq_general.md
+++ b/docs/faq_general.md
@ -4,6 +4,44 @@

 [QMK](https://github.com/qmk), short for Quantum Mechanical Keyboard, is a group of people building tools for custom keyboards. We started with the [QMK firmware](https://github.com/qmk/qmk_firmware), a heavily modified fork of [TMK](https://github.com/tmk/tmk_keyboard).

+## I don't know where to start!
+
+If this is the case, then you should start with our [Newbs Guide](newbs.md). There is a lot of great info there, and that should cover everything you need to get started.
+
+If that's an issue, hop onto the [QMK Configurator](https://config.qmk.fm), as that will handle a majority of what you need there.
+
+## How can I flash the firmware I built?
+
+First, head to the [Compiling/Flashing FAQ Page](faq_build.md). There is a good deal of info there, and you'll find a bunch of solutions to common issues there.
+
+## What if I have an issue that isn't covered here?
+
+Okay, that's fine. Then please check the [open issues in our GitHub](https://github.com/qmk/qmk_firmware/issues) to see if somebody is experiencing the same thing (make sure it's not just similar, but actually the same).
+
+If you can't find anything, then please open a [new issue](https://github.com/qmk/qmk_firmware/issues/new)!
+
+## What if I found a bug?
+
+Then please open an [issue](https://github.com/qmk/qmk_firmware/issues/new), and if you know how to fix it, open up a Pull Request on GitHub with the fix.
+
+## But `git` and `GitHub` are intimidating!
+
+Don't worry, we have some pretty nice [Guidelines](newbs_git_best_practices.md) on how to start using `git` and GitHub to make things easier to develop.
+
+Additionally, you can find additional `git` and GitHub related links [here](newbs_learn_more_resources.md).
+
+## I have a Keyboard that I want to add support for
+
+Awesome! Open up a Pull Request for it. We'll review the code, and merge it!
+
+### What if I want to do brand it with `QMK`?
+
+That's amazing! We would love to assist you with that!
+
+In fact, we have a [whole page](https://qmk.fm/powered/) dedicated to adding QMK Branding to your page and keyboard. This covers pretty much everything you need (knowledge and images) to officially support QMK.
+
+If you have any questions about this, open an issue or head to [Discord](https://discord.gg/Uq7gcHh).
+
 ## What Differences Are There Between QMK and TMK?

 TMK was originally designed and implemented by [Jun Wako](https://github.com/tmk). QMK started as [Jack Humbert](https://github.com/jackhumbert)'s fork of TMK for the Planck. After a while Jack's fork had diverged quite a bit from TMK, and in 2015 Jack decided to rename his fork to QMK.
--- a/docs/faq_keymap.md
+++ b/docs/faq_keymap.md
@ -14,6 +14,17 @@ There are 3 standard keyboard layouts in use around the world- ANSI, ISO, and JI
 <!-- Source for this image: http://www.keyboard-layout-editor.com/#/gists/bf431647d1001cff5eff20ae55621e9a -->
 ![Keyboard Layout Image](https://i.imgur.com/5wsh5wM.png)

+## How Can I Make Custom Names For Complex Keycodes?
+
+Sometimes, for readability's sake, it's useful to define custom names for some keycodes. People often define custom names using `#define`. For example:
+
+```c
+#define FN_CAPS LT(_FL, KC_CAPSLOCK)
+#define ALT_TAB LALT(KC_TAB)
+```
+
+This will allow you to use `FN_CAPS` and `ALT_TAB` in your keymap, keeping it more readable.
+
 ## Some Of My Keys Are Swapped Or Not Working

 QMK has two features, Bootmagic and Command, which allow you to change the behavior of your keyboard on the fly. This includes, but is not limited to, swapping Ctrl/Caps, disabling Gui, swapping Alt/Gui, swapping Backspace/Backslash, disabling all keys, and other behavioral modifications. 
--- a/docs/feature_advanced_keycodes.md
+++ b/docs/feature_advanced_keycodes.md
--- a/docs/feature_backlight.md
+++ b/docs/feature_backlight.md
@ -192,7 +192,7 @@ To change the behavior of the backlighting, `#define` these in your `config.h`:
 |`BACKLIGHT_PWM_CHANNEL` |`3`          |The PWM channel to use, see ST datasheets for pin to PWM channel mapping. Unless you are designing your own keyboard, you shouldn't need to change this|
 |`BACKLIGHT_PAL_MODE`    |`2`          |The pin alternative function to use, see ST datasheets for pin AF mapping. Unless you are designing your own keyboard, you shouldn't need to change this|

-## Software PWM Driver
+## Software PWM Driver :id=software-pwm-driver

 Emulation of PWM while running other keyboard tasks, it offers maximum hardware compatibility without extra platform configuration. The tradeoff is the backlight might jitter when the keyboard is busy. To enable, add this to your rules.mk:
 ```makefile
--- a/docs/feature_bootmagic.md
+++ b/docs/feature_bootmagic.md
@ -54,7 +54,7 @@ Hold down the Bootmagic key (Space by default) and the desired hotkey while plug
 |`6`               |Make layer 6 the default layer               |
 |`7`               |Make layer 7 the default layer               |

-## Keycodes
+## Keycodes :id=keycodes

 |Key                               |Aliases  |Description                                                               |
 |----------------------------------|---------|--------------------------------------------------------------------------|
@ -121,7 +121,7 @@ If you would like to change the hotkey assignments for Bootmagic, `#define` thes
 |`BOOTMAGIC_KEY_DEFAULT_LAYER_6`         |`KC_6`       |Make layer 6 the default layer                     |
 |`BOOTMAGIC_KEY_DEFAULT_LAYER_7`         |`KC_7`       |Make layer 7 the default layer                     |

-# Bootmagic Lite
+# Bootmagic Lite :id=bootmagic-lite

 In addition to the full blown Bootmagic feature, is the Bootmagic Lite feature that only handles jumping into the bootloader.  This is great for boards that don't have a physical reset button but you need a way to jump into the bootloader, and don't want to deal with the headache that Bootmagic can cause.

--- a/docs/feature_key_lock.md
+++ b/docs/feature_key_lock.md
@ -16,7 +16,7 @@ First, enable Key Lock by setting `KEY_LOCK_ENABLE = yes` in your `rules.mk`. Th

 ## Caveats

-Key Lock is only able to hold standard action keys and [One Shot modifier](feature_advanced_keycodes.md#one-shot-keys) keys (for example, if you have your Shift defined as `OSM(KC_LSFT)`).
+Key Lock is only able to hold standard action keys and [One Shot modifier](one_shot_keys.md) keys (for example, if you have your Shift defined as `OSM(KC_LSFT)`).
 This does not include any of the QMK special functions (except One Shot modifiers), or shifted versions of keys such as `KC_LPRN`. If it's in the [Basic Keycodes](keycodes_basic.md) list, it can be held.

 Switching layers will not cancel the Key Lock.
--- a/docs/feature_leader_key.md
+++ b/docs/feature_leader_key.md
@ -74,7 +74,7 @@ SEQ_THREE_KEYS(KC_C, KC_C, KC_C) {

 ## Strict Key Processing

-By default, the Leader Key feature will filter the keycode out of [`Mod-Tap`](feature_advanced_keycodes.md#mod-tap) and [`Layer Tap`](feature_advanced_keycodes.md#switching-and-toggling-layers) functions when checking for the Leader sequences. That means if you're using `LT(3, KC_A)`, it will pick this up as `KC_A` for the sequence, rather than `LT(3, KC_A)`, giving a more expected behavior for newer users.
+By default, the Leader Key feature will filter the keycode out of [`Mod-Tap`](mod_tap.md) and [`Layer Tap`](feature_advanced_keycodes.md#switching-and-toggling-layers) functions when checking for the Leader sequences. That means if you're using `LT(3, KC_A)`, it will pick this up as `KC_A` for the sequence, rather than `LT(3, KC_A)`, giving a more expected behavior for newer users.

 While, this may be fine for most, if you want to specify the whole keycode (eg, `LT(3, KC_A)` from the example above) in the sequence, you can enable this by added `#define LEADER_KEY_STRICT_KEY_PROCESSING` to your `config.h` file.  This well then disable the filtering, and you'll need to specify the whole keycode.

--- a/Show More
+++ b/Show More