mess around with the length to fix pitches

build_keyboard.mk

@@ -16,6 +16,7 @@ include common.mk
 KEYBOARD_FILESAFE := $(subst /,_,$(KEYBOARD))
 TARGET ?= $(KEYBOARD_FILESAFE)_$(KEYMAP)
 KEYBOARD_OUTPUT := $(BUILD_DIR)/obj_$(KEYBOARD_FILESAFE)
+STM32_PATH := quantum/stm32
 
 # Force expansion
 TARGET := $(TARGET)
@@ -72,6 +73,7 @@ ifneq ("$(wildcard $(KEYBOARD_PATH_1)/)","")
     KEYBOARD_PATHS += $(KEYBOARD_PATH_1)
 endif
 
+
 # Pull in rules.mk files from all our subfolders
 ifneq ("$(wildcard $(KEYBOARD_PATH_5)/rules.mk)","")
     include $(KEYBOARD_PATH_5)/rules.mk
@@ -89,6 +91,58 @@ ifneq ("$(wildcard $(KEYBOARD_PATH_1)/rules.mk)","")
     include $(KEYBOARD_PATH_1)/rules.mk
 endif
 
+
+MAIN_KEYMAP_PATH_1 := $(KEYBOARD_PATH_1)/keymaps/$(KEYMAP)
+MAIN_KEYMAP_PATH_2 := $(KEYBOARD_PATH_2)/keymaps/$(KEYMAP)
+MAIN_KEYMAP_PATH_3 := $(KEYBOARD_PATH_3)/keymaps/$(KEYMAP)
+MAIN_KEYMAP_PATH_4 := $(KEYBOARD_PATH_4)/keymaps/$(KEYMAP)
+MAIN_KEYMAP_PATH_5 := $(KEYBOARD_PATH_5)/keymaps/$(KEYMAP)
+
+ifneq ("$(wildcard $(MAIN_KEYMAP_PATH_5)/keymap.c)","")
+    -include $(MAIN_KEYMAP_PATH_5)/rules.mk
+    KEYMAP_C := $(MAIN_KEYMAP_PATH_5)/keymap.c
+    KEYMAP_PATH := $(MAIN_KEYMAP_PATH_5)
+else ifneq ("$(wildcard $(MAIN_KEYMAP_PATH_4)/keymap.c)","")
+    -include $(MAIN_KEYMAP_PATH_4)/rules.mk
+    KEYMAP_C := $(MAIN_KEYMAP_PATH_4)/keymap.c
+    KEYMAP_PATH := $(MAIN_KEYMAP_PATH_4)
+else ifneq ("$(wildcard $(MAIN_KEYMAP_PATH_3)/keymap.c)","")
+    -include $(MAIN_KEYMAP_PATH_3)/rules.mk
+    KEYMAP_C := $(MAIN_KEYMAP_PATH_3)/keymap.c
+    KEYMAP_PATH := $(MAIN_KEYMAP_PATH_3)
+else ifneq ("$(wildcard $(MAIN_KEYMAP_PATH_2)/keymap.c)","")
+    -include $(MAIN_KEYMAP_PATH_2)/rules.mk
+    KEYMAP_C := $(MAIN_KEYMAP_PATH_2)/keymap.c
+    KEYMAP_PATH := $(MAIN_KEYMAP_PATH_2)
+else ifneq ("$(wildcard $(MAIN_KEYMAP_PATH_1)/keymap.c)","")
+    -include $(MAIN_KEYMAP_PATH_1)/rules.mk
+    KEYMAP_C := $(MAIN_KEYMAP_PATH_1)/keymap.c
+    KEYMAP_PATH := $(MAIN_KEYMAP_PATH_1)
+else ifneq ($(LAYOUTS),)
+    include build_layout.mk
+else
+    $(error Could not find keymap)
+    # this state should never be reached
+endif
+
+ifeq ($(strip $(CTPC)), yes)
+  CONVERT_TO_PROTON_C=yes
+endif
+
+ifeq ($(strip $(CONVERT_TO_PROTON_C)), yes)
+    TARGET := $(TARGET)_proton_c
+    include $(STM32_PATH)/proton_c.mk
+    OPT_DEFS += -DCONVERT_TO_PROTON_C
+endif
+
+include quantum/mcu_selection.mk
+
+ifdef MCU_FAMILY
+    OPT_DEFS += -DQMK_STM32
+    KEYBOARD_PATHS += $(STM32_PATH)
+endif
+
+
 # Find all the C source files to be compiled in subfolders.
 KEYBOARD_SRC :=
 
@@ -227,39 +281,6 @@ PROJECT_DEFS := $(OPT_DEFS)
 PROJECT_INC := $(VPATH) $(EXTRAINCDIRS) $(KEYBOARD_PATHS)
 PROJECT_CONFIG := $(CONFIG_H)
 
-MAIN_KEYMAP_PATH_1 := $(KEYBOARD_PATH_1)/keymaps/$(KEYMAP)
-MAIN_KEYMAP_PATH_2 := $(KEYBOARD_PATH_2)/keymaps/$(KEYMAP)
-MAIN_KEYMAP_PATH_3 := $(KEYBOARD_PATH_3)/keymaps/$(KEYMAP)
-MAIN_KEYMAP_PATH_4 := $(KEYBOARD_PATH_4)/keymaps/$(KEYMAP)
-MAIN_KEYMAP_PATH_5 := $(KEYBOARD_PATH_5)/keymaps/$(KEYMAP)
-
-ifneq ("$(wildcard $(MAIN_KEYMAP_PATH_5)/keymap.c)","")
-    -include $(MAIN_KEYMAP_PATH_5)/rules.mk
-    KEYMAP_C := $(MAIN_KEYMAP_PATH_5)/keymap.c
-    KEYMAP_PATH := $(MAIN_KEYMAP_PATH_5)
-else ifneq ("$(wildcard $(MAIN_KEYMAP_PATH_4)/keymap.c)","")
-    -include $(MAIN_KEYMAP_PATH_4)/rules.mk
-    KEYMAP_C := $(MAIN_KEYMAP_PATH_4)/keymap.c
-    KEYMAP_PATH := $(MAIN_KEYMAP_PATH_4)
-else ifneq ("$(wildcard $(MAIN_KEYMAP_PATH_3)/keymap.c)","")
-    -include $(MAIN_KEYMAP_PATH_3)/rules.mk
-    KEYMAP_C := $(MAIN_KEYMAP_PATH_3)/keymap.c
-    KEYMAP_PATH := $(MAIN_KEYMAP_PATH_3)
-else ifneq ("$(wildcard $(MAIN_KEYMAP_PATH_2)/keymap.c)","")
-    -include $(MAIN_KEYMAP_PATH_2)/rules.mk
-    KEYMAP_C := $(MAIN_KEYMAP_PATH_2)/keymap.c
-    KEYMAP_PATH := $(MAIN_KEYMAP_PATH_2)
-else ifneq ("$(wildcard $(MAIN_KEYMAP_PATH_1)/keymap.c)","")
-    -include $(MAIN_KEYMAP_PATH_1)/rules.mk
-    KEYMAP_C := $(MAIN_KEYMAP_PATH_1)/keymap.c
-    KEYMAP_PATH := $(MAIN_KEYMAP_PATH_1)
-else ifneq ($(LAYOUTS),)
-    include build_layout.mk
-else
-    $(error Could not find keymap)
-    # this state should never be reached
-endif
-
 # Userspace setup and definitions
 ifeq ("$(USER_NAME)","")
     USER_NAME := $(KEYMAP)

common_features.mk

@@ -115,7 +115,7 @@ ifeq ($(strip $(RGBLIGHT_ENABLE)), yes)
 endif
 
 RGB_MATRIX_ENABLE ?= no
-VALID_MATRIX_TYPES := yes IS31FL3731 IS31FL3733 custom
+VALID_MATRIX_TYPES := yes IS31FL3731 IS31FL3733 IS31FL3737 custom
 ifneq ($(strip $(RGB_MATRIX_ENABLE)), no)
 ifeq ($(filter $(RGB_MATRIX_ENABLE),$(VALID_MATRIX_TYPES)),)
     $(error RGB_MATRIX_ENABLE="$(RGB_MATRIX_ENABLE)" is not a valid matrix type)
@@ -132,19 +132,26 @@ ifeq ($(strip $(RGB_MATRIX_ENABLE)), yes)
 endif
 
 ifeq ($(strip $(RGB_MATRIX_ENABLE)), IS31FL3731)
-    OPT_DEFS += -DIS31FL3731
+    OPT_DEFS += -DIS31FL3731 -DSTM32_I2C -DHAL_USE_I2C=TRUE
     COMMON_VPATH += $(DRIVER_PATH)/issi
     SRC += is31fl3731.c
     SRC += i2c_master.c
 endif
 
 ifeq ($(strip $(RGB_MATRIX_ENABLE)), IS31FL3733)
-    OPT_DEFS += -DIS31FL3733
+    OPT_DEFS += -DIS31FL3733 -DSTM32_I2C -DHAL_USE_I2C=TRUE
     COMMON_VPATH += $(DRIVER_PATH)/issi
     SRC += is31fl3733.c
     SRC += i2c_master.c
 endif
 
+ifeq ($(strip $(RGB_MATRIX_ENABLE)), IS31FL3737)
+    OPT_DEFS += -DIS31FL3737 -DSTM32_I2C -DHAL_USE_I2C=TRUE
+    COMMON_VPATH += $(DRIVER_PATH)/issi
+    SRC += is31fl3737.c
+    SRC += i2c_master.c
+endif
+
 ifeq ($(strip $(TAP_DANCE_ENABLE)), yes)
     OPT_DEFS += -DTAP_DANCE_ENABLE
     SRC += $(QUANTUM_DIR)/process_keycode/process_tap_dance.c

docs/_sidebar.md

@@ -1,100 +0,0 @@
-* [Complete Newbs Guide](newbs.md)
-  * [Getting Started](newbs_getting_started.md)
-  * [Building Your First Firmware](newbs_building_firmware.md)
-  * [Flashing Firmware](newbs_flashing.md)
-  * [Testing and Debugging](newbs_testing_debugging.md)
-  * [Best Practices](newbs_best_practices.md)
-  * [Learning Resources](newbs_learn_more_resources.md)
-
-* [QMK Basics](README.md)
-  * [QMK Introduction](getting_started_introduction.md)
-  * [Contributing to QMK](contributing.md)
-  * [How to Use Github](getting_started_github.md)
-  * [Getting Help](getting_started_getting_help.md)
-
-* [FAQ](faq.md)
-  * [General FAQ](faq_general.md)
-  * [Build/Compile QMK](faq_build.md)
-  * [Debugging/Troubleshooting QMK](faq_debug.md)
-  * [Keymap](faq_keymap.md)
-
-* Detailed Guides
-  * [Install Build Tools](getting_started_build_tools.md)
-  * [Vagrant Guide](getting_started_vagrant.md)
-  * [Build/Compile Instructions](getting_started_make_guide.md)
-  * [Flashing Firmware](flashing.md)
-  * [Customizing Functionality](custom_quantum_functions.md)
-  * [Keymap Overview](keymap.md)
-
-* [Hardware](hardware.md)
-  * [AVR Processors](hardware_avr.md)
-  * [Drivers](hardware_drivers.md)
-
-* Reference
-  * [Keyboard Guidelines](hardware_keyboard_guidelines.md)
-  * [Config Options](config_options.md)
-  * [Keycodes](keycodes.md)
-  * [Documentation Best Practices](documentation_best_practices.md)
-  * [Documentation Templates](documentation_templates.md)
-  * [Glossary](reference_glossary.md)
-  * [Unit Testing](unit_testing.md)
-  * [Useful Functions](ref_functions.md)
-  * [Configurator Support](reference_configurator_support.md)
-
-* [Features](features.md)
-  * [Basic Keycodes](keycodes_basic.md)
-  * [US ANSI Shifted Keys](keycodes_us_ansi_shifted.md)
-  * [Quantum Keycodes](quantum_keycodes.md)
-  * [Advanced Keycodes](feature_advanced_keycodes.md)
-  * [Audio](feature_audio.md)
-  * [Auto Shift](feature_auto_shift.md)
-  * [Backlight](feature_backlight.md)
-  * [Bluetooth](feature_bluetooth.md)
-  * [Bootmagic](feature_bootmagic.md)
-  * [Combos](feature_combo)
-  * [Command](feature_command.md)
-  * [Dynamic Macros](feature_dynamic_macros.md)
-  * [Encoders](feature_encoders.md)
-  * [Grave Escape](feature_grave_esc.md)
-  * [Key Lock](feature_key_lock.md)
-  * [Layouts](feature_layouts.md)
-  * [Leader Key](feature_leader_key.md)
-  * [Macros](feature_macros.md)
-  * [Mouse Keys](feature_mouse_keys.md)
-  * [One Shot Keys](feature_advanced_keycodes.md#one-shot-keys)
-  * [Pointing Device](feature_pointing_device.md)
-  * [PS/2 Mouse](feature_ps2_mouse.md)
-  * [RGB Lighting](feature_rgblight.md)
-  * [RGB Matrix](feature_rgb_matrix.md)
-  * [Space Cadet Shift](feature_space_cadet_shift.md)
-  * [Space Cadet Shift Enter](feature_space_cadet_shift_enter.md)
-  * [Stenography](feature_stenography.md)
-  * [Swap Hands](feature_swap_hands.md)
-  * [Tap Dance](feature_tap_dance.md)
-  * [Terminal](feature_terminal.md)
-  * [Thermal Printer](feature_thermal_printer.md)
-  * [Unicode](feature_unicode.md)
-  * [Userspace](feature_userspace.md)
-
-* For Makers and Modders
-  * [Hand Wiring Guide](hand_wire.md)
-  * [ISP Flashing Guide](isp_flashing_guide.md)
-  * [ARM Debugging Guide](arm_debugging.md)
-  * [I2C Driver](i2c_driver.md)
-
-* For a Deeper Understanding
-  * [How Keyboards Work](how_keyboards_work.md)
-  * [Understanding QMK](understanding_qmk.md)
-
-* Other Topics
-  * [Using Eclipse with QMK](eclipse.md)
-  * [Support](support.md)
-
-* QMK Internals (In Progress)
-  * [Defines](internals_defines.md)
-  * [Input Callback Reg](internals_input_callback_reg.md)
-  * [Midi Device](internals_midi_device.md)
-  * [Midi Device Setup Process](internals_midi_device_setup_process.md)
-  * [Midi Util](internals_midi_util.md)
-  * [Send Functions](internals_send_functions.md)
-  * [Sysex Tools](internals_sysex_tools.md)

docs/_summary.md

@@ -81,6 +81,8 @@
   * [ISP Flashing Guide](isp_flashing_guide.md)
   * [ARM Debugging Guide](arm_debugging.md)
   * [I2C Driver](i2c_driver.md)
+  * [GPIO Controls](internals_gpio_control.md)
+  * [Proton C Conversion](proton_c_conversion.md)
 
 * For a Deeper Understanding
   * [How Keyboards Work](how_keyboards_work.md)

docs/index.html

@@ -17,7 +17,7 @@
       name: 'QMK Firmware',
       nameLink: 'https://qmk.fm/',
       repo: 'qmk/qmk_firmware',
-      loadSidebar: true,
+      loadSidebar: '_summary.md',
       auto2top: true,
       formatUpdated: '{YYYY}/{MM}/{DD} {HH}:{mm}',
       search: {

docs/proton_c_conversion.md

@@ -0,0 +1,21 @@
+# Converting a board to use the Proton C
+
+If a board currently supported in QMK uses a Pro Micro (or compatible board) and you want to use the Proton C, you can generate the firmware by appending `CONVERT_TO_PROTON_C=yes` (or `CTPC=yes`) to your make argument, like this:
+
+    make 40percentclub/mf68:default CTPC=yes
+
+You can add the same argument to your keymap's `rules.mk`, which will accomplish the same thing.
+
+This exposes the `CONVERT_TO_PROTON_C` flag that you can use in your code with `#ifdef`s, like this:
+
+    #ifdef CONVERT_TO_PROTON_C
+        // Proton C code
+    #else
+        // Pro Micro code
+    #endif
+
+Before being able to compile, you may get some errors about `PORTB/DDRB`, etc not being defined, so you'll need to convert the keyboard's code to use the [GPIO Controls](internals_gpio_control.md) that will work for both ARM and AVR. This shouldn't affect the AVR builds at all.
+
+The Proton C only has one on-board LED (C13), and by default, the TXLED (D5) is mapped to it. If you want the RXLED (B0) mapped to it instead, add this like to your `config.h`:
+
+    #define CONVERT_TO_PROTON_C_RXLED

drivers/boards/GENERIC_STM32_F303XC/board.h

@@ -18,14 +18,14 @@
 #define _BOARD_H_
 
 /*
- * Setup for Clueboard 60% Keyboard
+ * Setup for Generic STM32_F303 Board
  */
 
 /*
  * Board identifier.
  */
 #define BOARD_GENERIC_STM32_F303XC
-#define BOARD_NAME                  "Planck PCB"
+#define BOARD_NAME                  "STM32_F303"
 
 /*
  * Board oscillators-related settings.

drivers/issi/is31fl3737.c

@@ -0,0 +1,252 @@
+/* Copyright 2017 Jason Williams
+ * Copyright 2018 Jack Humbert
+ * Copyright 2018 Yiancar
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#ifdef __AVR__
+#include <avr/interrupt.h>
+#include <avr/io.h>
+#include <util/delay.h>
+#else
+#include "wait.h"
+#endif
+
+#include <string.h>
+#include "i2c_master.h"
+#include "progmem.h"
+#include "rgb_matrix.h"
+
+// This is a 7-bit address, that gets left-shifted and bit 0
+// set to 0 for write, 1 for read (as per I2C protocol)
+// The address will vary depending on your wiring:
+// 00 <-> GND
+// 01 <-> SCL
+// 10 <-> SDA
+// 11 <-> VCC
+// ADDR1 represents A1:A0 of the 7-bit address.
+// ADDR2 represents A3:A2 of the 7-bit address.
+// The result is: 0b101(ADDR2)(ADDR1)
+#define ISSI_ADDR_DEFAULT 0x50
+
+#define ISSI_COMMANDREGISTER 0xFD
+#define ISSI_COMMANDREGISTER_WRITELOCK 0xFE
+#define ISSI_INTERRUPTMASKREGISTER 0xF0
+#define ISSI_INTERRUPTSTATUSREGISTER 0xF1
+
+#define ISSI_PAGE_LEDCONTROL 0x00 //PG0
+#define ISSI_PAGE_PWM 0x01        //PG1
+#define ISSI_PAGE_AUTOBREATH 0x02 //PG2
+#define ISSI_PAGE_FUNCTION 0x03   //PG3
+
+#define ISSI_REG_CONFIGURATION 0x00 //PG3
+#define ISSI_REG_GLOBALCURRENT 0x01 //PG3
+#define ISSI_REG_RESET 0x11// PG3
+#define ISSI_REG_SWPULLUP 0x0F //PG3
+#define ISSI_REG_CSPULLUP 0x10 //PG3
+
+#ifndef ISSI_TIMEOUT
+  #define ISSI_TIMEOUT 100
+#endif
+
+#ifndef ISSI_PERSISTENCE
+  #define ISSI_PERSISTENCE 0
+#endif
+
+// Transfer buffer for TWITransmitData()
+uint8_t g_twi_transfer_buffer[20];
+
+// These buffers match the IS31FL3737 PWM registers.
+// The control buffers match the PG0 LED On/Off registers.
+// Storing them like this is optimal for I2C transfers to the registers.
+// We could optimize this and take out the unused registers from these
+// buffers and the transfers in IS31FL3737_write_pwm_buffer() but it's
+// probably not worth the extra complexity.
+uint8_t g_pwm_buffer[DRIVER_COUNT][192];
+bool g_pwm_buffer_update_required = false;
+
+uint8_t g_led_control_registers[DRIVER_COUNT][24] = { { 0 } };
+bool g_led_control_registers_update_required = false;
+
+void IS31FL3737_write_register( uint8_t addr, uint8_t reg, uint8_t data )
+{
+    g_twi_transfer_buffer[0] = reg;
+    g_twi_transfer_buffer[1] = data;
+
+  #if ISSI_PERSISTENCE > 0
+    for (uint8_t i = 0; i < ISSI_PERSISTENCE; i++) {
+      if (i2c_transmit(addr << 1, g_twi_transfer_buffer, 2, ISSI_TIMEOUT) == 0)
+        break;
+    }
+  #else
+    i2c_transmit(addr << 1, g_twi_transfer_buffer, 2, ISSI_TIMEOUT);
+  #endif
+}
+
+void IS31FL3737_write_pwm_buffer( uint8_t addr, uint8_t *pwm_buffer )
+{
+    // assumes PG1 is already selected
+
+    // transmit PWM registers in 12 transfers of 16 bytes
+    // g_twi_transfer_buffer[] is 20 bytes
+
+    // iterate over the pwm_buffer contents at 16 byte intervals
+    for ( int i = 0; i < 192; i += 16 ) {
+        g_twi_transfer_buffer[0] = i;
+        // copy the data from i to i+15
+        // device will auto-increment register for data after the first byte
+        // thus this sets registers 0x00-0x0F, 0x10-0x1F, etc. in one transfer
+        for ( int j = 0; j < 16; j++ ) {
+            g_twi_transfer_buffer[1 + j] = pwm_buffer[i + j];
+        }
+
+    #if ISSI_PERSISTENCE > 0
+      for (uint8_t i = 0; i < ISSI_PERSISTENCE; i++) {
+        if (i2c_transmit(addr << 1, g_twi_transfer_buffer, 17, ISSI_TIMEOUT) == 0)
+          break;
+      }
+    #else
+      i2c_transmit(addr << 1, g_twi_transfer_buffer, 17, ISSI_TIMEOUT);
+    #endif
+    }
+}
+
+void IS31FL3737_init( uint8_t addr )
+{
+    // In order to avoid the LEDs being driven with garbage data
+    // in the LED driver's PWM registers, shutdown is enabled last.
+    // Set up the mode and other settings, clear the PWM registers,
+    // then disable software shutdown.
+
+    // Unlock the command register.
+    IS31FL3737_write_register( addr, ISSI_COMMANDREGISTER_WRITELOCK, 0xC5 );
+
+    // Select PG0
+    IS31FL3737_write_register( addr, ISSI_COMMANDREGISTER, ISSI_PAGE_LEDCONTROL );
+    // Turn off all LEDs.
+    for ( int i = 0x00; i <= 0x17; i++ )
+    {
+        IS31FL3737_write_register( addr, i, 0x00 );
+    }
+
+    // Unlock the command register.
+    IS31FL3737_write_register( addr, ISSI_COMMANDREGISTER_WRITELOCK, 0xC5 );
+
+    // Select PG1
+    IS31FL3737_write_register( addr, ISSI_COMMANDREGISTER, ISSI_PAGE_PWM );
+    // Set PWM on all LEDs to 0
+    // No need to setup Breath registers to PWM as that is the default.
+    for ( int i = 0x00; i <= 0xBF; i++ )
+    {
+        IS31FL3737_write_register( addr, i, 0x00 );
+    }
+
+    // Unlock the command register.
+    IS31FL3737_write_register( addr, ISSI_COMMANDREGISTER_WRITELOCK, 0xC5 );
+
+    // Select PG3
+    IS31FL3737_write_register( addr, ISSI_COMMANDREGISTER, ISSI_PAGE_FUNCTION );
+    // Set global current to maximum.
+    IS31FL3737_write_register( addr, ISSI_REG_GLOBALCURRENT, 0xFF );
+    // Disable software shutdown.
+    IS31FL3737_write_register( addr, ISSI_REG_CONFIGURATION, 0x01 );
+
+    // Wait 10ms to ensure the device has woken up.
+    #ifdef __AVR__
+    _delay_ms( 10 );
+    #else
+    wait_ms(10);
+    #endif
+}
+
+void IS31FL3737_set_color( int index, uint8_t red, uint8_t green, uint8_t blue )
+{
+    if ( index >= 0 && index < DRIVER_LED_TOTAL ) {
+        is31_led led = g_is31_leds[index];
+
+        g_pwm_buffer[led.driver][led.r] = red;
+        g_pwm_buffer[led.driver][led.g] = green;
+        g_pwm_buffer[led.driver][led.b] = blue;
+        g_pwm_buffer_update_required = true;
+    }
+}
+
+void IS31FL3737_set_color_all( uint8_t red, uint8_t green, uint8_t blue )
+{
+    for ( int i = 0; i < DRIVER_LED_TOTAL; i++ )
+    {
+        IS31FL3737_set_color( i, red, green, blue );
+    }
+}
+
+void IS31FL3737_set_led_control_register( uint8_t index, bool red, bool green, bool blue )
+{
+    is31_led led = g_is31_leds[index];
+
+  uint8_t control_register_r = led.r / 8;
+  uint8_t control_register_g = led.g / 8;
+  uint8_t control_register_b = led.b / 8;
+  uint8_t bit_r = led.r % 8;
+  uint8_t bit_g = led.g % 8;
+  uint8_t bit_b = led.b % 8;
+
+    if ( red ) {
+        g_led_control_registers[led.driver][control_register_r] |= (1 << bit_r);
+    } else {
+        g_led_control_registers[led.driver][control_register_r] &= ~(1 << bit_r);
+    }
+    if ( green ) {
+        g_led_control_registers[led.driver][control_register_g] |= (1 << bit_g);
+    } else {
+        g_led_control_registers[led.driver][control_register_g] &= ~(1 << bit_g);
+    }
+    if ( blue ) {
+        g_led_control_registers[led.driver][control_register_b] |= (1 << bit_b);
+    } else {
+        g_led_control_registers[led.driver][control_register_b] &= ~(1 << bit_b);
+    }
+
+    g_led_control_registers_update_required = true;
+
+}
+
+void IS31FL3737_update_pwm_buffers( uint8_t addr1, uint8_t addr2 )
+{
+    if ( g_pwm_buffer_update_required )
+    {
+        // Firstly we need to unlock the command register and select PG1
+        IS31FL3737_write_register( addr1, ISSI_COMMANDREGISTER_WRITELOCK, 0xC5 );
+        IS31FL3737_write_register( addr1, ISSI_COMMANDREGISTER, ISSI_PAGE_PWM );
+
+        IS31FL3737_write_pwm_buffer( addr1, g_pwm_buffer[0] );
+        //IS31FL3737_write_pwm_buffer( addr2, g_pwm_buffer[1] );
+    }
+    g_pwm_buffer_update_required = false;
+}
+
+void IS31FL3737_update_led_control_registers( uint8_t addr1, uint8_t addr2 )
+{
+    if ( g_led_control_registers_update_required )
+    {
+        // Firstly we need to unlock the command register and select PG0
+        IS31FL3737_write_register( addr1, ISSI_COMMANDREGISTER_WRITELOCK, 0xC5 );
+        IS31FL3737_write_register( addr1, ISSI_COMMANDREGISTER, ISSI_PAGE_LEDCONTROL );
+        for ( int i=0; i<24; i++ )
+        {
+            IS31FL3737_write_register(addr1, i, g_led_control_registers[0][i] );
+            //IS31FL3737_write_register(addr2, i, g_led_control_registers[1][i] );
+        }
+    }
+}

drivers/issi/is31fl3737.h

@@ -0,0 +1,207 @@
+/* Copyright 2017 Jason Williams
+ * Copyright 2018 Jack Humbert
+ * Copyright 2018 Yiancar
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+
+#ifndef IS31FL3737_DRIVER_H
+#define IS31FL3737_DRIVER_H
+
+#include <stdint.h>
+#include <stdbool.h>
+
+typedef struct is31_led {
+  uint8_t driver:2;
+  uint8_t r;
+  uint8_t g;
+  uint8_t b;
+} __attribute__((packed)) is31_led;
+
+extern const is31_led g_is31_leds[DRIVER_LED_TOTAL];
+
+void IS31FL3737_init( uint8_t addr );
+void IS31FL3737_write_register( uint8_t addr, uint8_t reg, uint8_t data );
+void IS31FL3737_write_pwm_buffer( uint8_t addr, uint8_t *pwm_buffer );
+
+void IS31FL3737_set_color( int index, uint8_t red, uint8_t green, uint8_t blue );
+void IS31FL3737_set_color_all( uint8_t red, uint8_t green, uint8_t blue );
+
+void IS31FL3737_set_led_control_register( uint8_t index, bool red, bool green, bool blue );
+
+// This should not be called from an interrupt
+// (eg. from a timer interrupt).
+// Call this while idle (in between matrix scans).
+// If the buffer is dirty, it will update the driver with the buffer.
+void IS31FL3737_update_pwm_buffers( uint8_t addr1, uint8_t addr2 );
+void IS31FL3737_update_led_control_registers( uint8_t addr1, uint8_t addr2 );
+
+#define A_1   0x00
+#define A_2   0x01
+#define A_3   0x02
+#define A_4   0x03
+#define A_5   0x04
+#define A_6   0x05
+#define A_7   0x08
+#define A_8   0x09
+#define A_9   0x0A
+#define A_10  0x0B
+#define A_11  0x0C
+#define A_12  0x0D
+
+#define B_1   0x10
+#define B_2   0x11
+#define B_3   0x12
+#define B_4   0x13
+#define B_5   0x14
+#define B_6   0x15
+#define B_7   0x18
+#define B_8   0x19
+#define B_9   0x1A
+#define B_10  0x1B
+#define B_11  0x1C
+#define B_12  0x1D
+
+#define C_1   0x20
+#define C_2   0x21
+#define C_3   0x22
+#define C_4   0x23
+#define C_5   0x24
+#define C_6   0x25
+#define C_7   0x28
+#define C_8   0x29
+#define C_9   0x2A
+#define C_10  0x2B
+#define C_11  0x2C
+#define C_12  0x2D
+
+#define D_1   0x30
+#define D_2   0x31
+#define D_3   0x32
+#define D_4   0x33
+#define D_5   0x34
+#define D_6   0x35
+#define D_7   0x38
+#define D_8   0x39
+#define D_9   0x3A
+#define D_10  0x3B
+#define D_11  0x3C
+#define D_12  0x3D
+
+#define E_1   0x40
+#define E_2   0x41
+#define E_3   0x42
+#define E_4   0x43
+#define E_5   0x44
+#define E_6   0x45
+#define E_7   0x48
+#define E_8   0x49
+#define E_9   0x4A
+#define E_10  0x4B
+#define E_11  0x4C
+#define E_12  0x4D
+
+#define F_1   0x50
+#define F_2   0x51
+#define F_3   0x52
+#define F_4   0x53
+#define F_5   0x54
+#define F_6   0x55
+#define F_7   0x58
+#define F_8   0x59
+#define F_9   0x5A
+#define F_10  0x5B
+#define F_11  0x5C
+#define F_12  0x5D
+
+#define G_1   0x60
+#define G_2   0x61
+#define G_3   0x62
+#define G_4   0x63
+#define G_5   0x64
+#define G_6   0x65
+#define G_7   0x68
+#define G_8   0x69
+#define G_9   0x6A
+#define G_10  0x6B
+#define G_11  0x6C
+#define G_12  0x6D
+
+#define H_1   0x70
+#define H_2   0x71
+#define H_3   0x72
+#define H_4   0x73
+#define H_5   0x74
+#define H_6   0x75
+#define H_7   0x78
+#define H_8   0x79
+#define H_9   0x7A
+#define H_10  0x7B
+#define H_11  0x7C
+#define H_12  0x7D
+
+#define I_1   0x80
+#define I_2   0x81
+#define I_3   0x82
+#define I_4   0x83
+#define I_5   0x84
+#define I_6   0x85
+#define I_7   0x88
+#define I_8   0x89
+#define I_9   0x8A
+#define I_10  0x8B
+#define I_11  0x8C
+#define I_12  0x8D
+
+#define J_1   0x90
+#define J_2   0x91
+#define J_3   0x92
+#define J_4   0x93
+#define J_5   0x94
+#define J_6   0x95
+#define J_7   0x98
+#define J_8   0x99
+#define J_9   0x9A
+#define J_10  0x9B
+#define J_11  0x9C
+#define J_12  0x9D
+
+#define K_1   0xA0
+#define K_2   0xA1
+#define K_3   0xA2
+#define K_4   0xA3
+#define K_5   0xA4
+#define K_6   0xA5
+#define K_7   0xA8
+#define K_8   0xA9
+#define K_9   0xAA
+#define K_10  0xAB
+#define K_11  0xAC
+#define K_12  0xAD
+
+#define L_1   0xB0
+#define L_2   0xB1
+#define L_3   0xB2
+#define L_4   0xB3
+#define L_5   0xB4
+#define L_6   0xB5
+#define L_7   0xB8
+#define L_8   0xB9
+#define L_9   0xBA
+#define L_10  0xBB
+#define L_11  0xBC
+#define L_12  0xBD
+
+#endif // IS31FL3737_DRIVER_H

keyboards/1upkeyboards/sweet16/keymaps/default/keymap.c

@@ -6,9 +6,9 @@ enum custom_keycodes {
 
 const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
     LAYOUT_ortho_4x4(
-        KC_7, KC_8,   KC_9,   KC_ASTR, 
-        KC_4, KC_5,   KC_6,   KC_SLSH, 
-        KC_1, KC_2,   KC_3,   KC_MINS, 
+        KC_7, KC_8,   KC_9,   KC_ASTR,
+        KC_4, KC_5,   KC_6,   KC_SLSH,
+        KC_1, KC_2,   KC_3,   KC_MINS,
         KC_0, KC_ENT, KC_DOT, KC_EQL
     )
 };
@@ -27,6 +27,7 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) {
 
 void led_set_user(uint8_t usb_led) {
 
+  #ifndef CONVERT_TO_PROTON_C
   /* Map RXLED to USB_LED_NUM_LOCK */
 	if (usb_led & (1 << USB_LED_NUM_LOCK)) {
 		DDRB |= (1 << 0); PORTB &= ~(1 << 0);
@@ -40,4 +41,5 @@ void led_set_user(uint8_t usb_led) {
 	} else {
 		DDRD &= ~(1 << 5); PORTD &= ~(1 << 5);
 	}
+  #endif
 }

keyboards/planck/ez/config.h

@@ -0,0 +1,144 @@
+/*
+ * Copyright 2018 Jack Humbert <jack.humb@gmail.com>
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+/* USB Device descriptor parameter */
+#define DEVICE_VER 0x0000
+
+#undef MATRIX_ROWS
+#undef MATRIX_COLS
+/* key matrix size */
+#define MATRIX_ROWS 8
+#define MATRIX_COLS 6
+
+/*
+ * Keyboard Matrix Assignments
+ *
+ * Change this to how you wired your keyboard
+ * COLS: AVR pins used for columns, left to right
+ * ROWS: AVR pins used for rows, top to bottom
+ * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
+ *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
+ *
+*/
+
+#undef MATRIX_ROW_PINS
+#undef MATRIX_COL_PINS
+
+#define MATRIX_ROW_PINS { A10, A9, A8, B15, C13, C14, C15, A2 }
+#define MATRIX_COL_PINS { B11, B10, B2, B1, A7, B0 }
+
+#define NUMBER_OF_ENCODERS 1
+#define ENCODERS_PAD_A { B12 }
+#define ENCODERS_PAD_B { B13 }
+
+#define MUSIC_MAP
+#undef AUDIO_VOICES
+#undef C6_AUDIO
+
+/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
+#define DEBOUNCE 6
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+//#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+//#define LOCKING_RESYNC_ENABLE
+
+/*
+ * Force NKRO
+ *
+ * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
+ * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
+ * makefile for this to work.)
+ *
+ * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
+ * until the next keyboard reset.
+ *
+ * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
+ * fully operational during normal computer usage.
+ *
+ * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
+ * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
+ * bootmagic, NKRO mode will always be enabled until it is toggled again during a
+ * power-up.
+ *
+ */
+//#define FORCE_NKRO
+
+/* key combination for magic key command */
+#define IS_COMMAND() ( \
+  keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
+)
+
+/*
+ * Feature disable options
+ *  These options are also useful to firmware size reduction.
+ */
+
+/* disable debug print */
+//#define NO_DEBUG
+
+/* disable print */
+//#define NO_PRINT
+
+/* disable action features */
+//#define NO_ACTION_LAYER
+//#define NO_ACTION_TAPPING
+//#define NO_ACTION_ONESHOT
+//#define NO_ACTION_MACRO
+//#define NO_ACTION_FUNCTION
+
+/*
+ * MIDI options
+ */
+
+/* Prevent use of disabled MIDI features in the keymap */
+//#define MIDI_ENABLE_STRICT 1
+
+/* enable basic MIDI features:
+   - MIDI notes can be sent when in Music mode is on
+*/
+//#define MIDI_BASIC
+
+/* enable advanced MIDI features:
+   - MIDI notes can be added to the keymap
+   - Octave shift and transpose
+   - Virtual sustain, portamento, and modulation wheel
+   - etc.
+*/
+//#define MIDI_ADVANCED
+
+/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
+//#define MIDI_TONE_KEYCODE_OCTAVES 1
+
+// #define WS2812_LED_N 2
+// #define RGBLED_NUM WS2812_LED_N
+// #define WS2812_TIM_N 2
+// #define WS2812_TIM_CH 2
+// #define PORT_WS2812     GPIOA
+// #define PIN_WS2812      1
+// #define WS2812_DMA_STREAM STM32_DMA1_STREAM2  // DMA stream for TIMx_UP (look up in reference manual under DMA Channel selection)
+//#define WS2812_DMA_CHANNEL 7                  // DMA channel for TIMx_UP
+//#define WS2812_EXTERNAL_PULLUP
+
+#define DRIVER_ADDR_1 0b1010000
+#define DRIVER_ADDR_2 0b1010000 // this is here for compliancy reasons.
+
+#define DRIVER_COUNT 1
+#define DRIVER_1_LED_TOTAL 47
+#define DRIVER_LED_TOTAL DRIVER_1_LED_TOTAL

keyboards/planck/ez/ez.c

@@ -0,0 +1,175 @@
+/* Copyright 2018 Jack Humbert <jack.humb@gmail.com>
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include "ez.h"
+
+const is31_led g_is31_leds[DRIVER_LED_TOTAL] = {
+/* Refer to IS31 manual for these locations
+ *   driver
+ *   |  R location
+ *   |  |      G location
+ *   |  |      |      B location
+ *   |  |      |      | */
+    {0, A_12,  B_12,  C_12},
+    {0, A_11,  B_11,  C_11},
+    {0, A_10,  B_10,  C_10},
+    {0, A_9,   B_9,   C_9},
+    {0, A_8,   B_8,   C_8},
+    {0, A_7,   B_7,   C_7},
+
+    {0, G_12,  H_12,  I_12},
+    {0, G_11,  H_11,  I_11},
+    {0, G_10,  H_10,  I_10},
+    {0, G_9,   H_9,   I_9},
+    {0, G_8,   H_8,   I_8},
+    {0, G_7,   H_7,   I_7},
+
+    {0, A_6,   B_6,   C_6},
+    {0, A_5,   B_5,   C_5},
+    {0, A_4,   B_4,   C_4},
+    {0, A_3,   B_3,   C_3},
+    {0, A_2,   B_2,   C_2},
+    {0, A_1,   B_1,   C_1},
+
+    {0, G_6,   H_6,   I_6},
+    {0, G_5,   H_5,   I_5},
+    {0, G_4,   H_4,   I_4},
+    {0, G_3,   H_3,   I_3},
+    {0, G_2,   H_2,   I_2},
+    {0, G_1,   H_1,   I_1},
+
+    {0, D_12,  E_12,  F_12},
+    {0, D_11,  E_11,  F_11},
+    {0, D_10,  E_10,  F_10},
+    {0, D_9,   E_9,   F_9},
+    {0, D_8,   E_8,   F_8},
+    {0, D_7,   E_7,   F_7},
+
+    {0, J_12,  K_12,  L_12},
+    {0, J_11,  K_11,  L_11},
+    {0, J_10,  K_10,  L_10},
+    {0, J_9,   K_9,   L_9},
+    {0, J_8,   K_8,   L_8},
+    {0, J_7,   K_7,   L_7},
+
+    {0, D_6,   E_6,   F_6},
+    {0, D_5,   E_5,   F_5},
+    {0, D_4,   E_4,   F_4},
+    {0, D_3,   E_3,   F_3},
+    {0, D_2,   E_2,   F_2},
+    {0, D_1,   E_1,   F_1},
+
+    {0, J_6,   K_6,   L_6},
+    {0, J_5,   K_5,   L_5},
+    {0, J_4,   K_4,   L_4},
+    {0, J_3,   K_3,   L_3},
+    {0, J_2,   K_2,   L_2},
+
+};
+
+const rgb_led g_rgb_leds[DRIVER_LED_TOTAL] = {
+
+    /*{row | col << 4}
+      |             {x=0..224, y=0..64}
+      |              |                 modifier
+      |              |                 | */
+    {{0|(0<<4)},   {20.36*0, 21.33*0}, 1},
+    {{0|(1<<4)},   {20.36*1, 21.33*0}, 0},
+    {{0|(2<<4)},   {20.36*2, 21.33*0}, 0},
+    {{0|(3<<4)},   {20.36*3, 21.33*0}, 0},
+    {{0|(4<<4)},   {20.36*4, 21.33*0}, 0},
+    {{0|(5<<4)},   {20.36*5, 21.33*0}, 0},
+    {{0|(6<<4)},   {20.36*6, 21.33*0}, 0},
+    {{0|(7<<4)},   {20.36*7, 21.33*0}, 0},
+    {{0|(8<<4)},   {20.36*8, 21.33*0}, 0},
+    {{0|(9<<4)},   {20.36*9, 21.33*0}, 0},
+    {{0|(10<<4)},  {20.36*10,21.33*0}, 0},
+    {{0|(11<<4)},  {20.36*11,21.33*0}, 1},
+
+    {{1|(0<<4)},   {20.36*0, 21.33*1}, 1},
+    {{1|(1<<4)},   {20.36*1, 21.33*1}, 0},
+    {{1|(2<<4)},   {20.36*2, 21.33*1}, 0},
+    {{1|(3<<4)},   {20.36*3, 21.33*1}, 0},
+    {{1|(4<<4)},   {20.36*4, 21.33*1}, 0},
+    {{1|(5<<4)},   {20.36*5, 21.33*1}, 0},
+    {{1|(6<<4)},   {20.36*6, 21.33*1}, 0},
+    {{1|(7<<4)},   {20.36*7, 21.33*1}, 0},
+    {{1|(8<<4)},   {20.36*8, 21.33*1}, 0},
+    {{1|(9<<4)},   {20.36*9, 21.33*1}, 0},
+    {{1|(10<<4)},  {20.36*10,21.33*1}, 0},
+    {{1|(11<<4)},  {20.36*11,21.33*1}, 1},
+
+    {{2|(0<<4)},   {20.36*0, 21.33*2}, 1},
+    {{2|(1<<4)},   {20.36*1, 21.33*2}, 0},
+    {{2|(2<<4)},   {20.36*2, 21.33*2}, 0},
+    {{2|(3<<4)},   {20.36*3, 21.33*2}, 0},
+    {{2|(4<<4)},   {20.36*4, 21.33*2}, 0},
+    {{2|(5<<4)},   {20.36*5, 21.33*2}, 0},
+    {{2|(6<<4)},   {20.36*6, 21.33*2}, 0},
+    {{2|(7<<4)},   {20.36*7, 21.33*2}, 0},
+    {{2|(8<<4)},   {20.36*8, 21.33*2}, 0},
+    {{2|(9<<4)},   {20.36*9, 21.33*2}, 0},
+    {{2|(10<<4)},  {20.36*10,21.33*2}, 0},
+    {{2|(11<<4)},  {20.36*11,21.33*2}, 1},
+
+    {{3|(0<<4)},   {20.36*0, 21.33*3}, 1},
+    {{3|(1<<4)},   {20.36*1, 21.33*3}, 1},
+    {{3|(2<<4)},   {20.36*2, 21.33*3}, 1},
+    {{3|(3<<4)},   {20.36*3, 21.33*3}, 1},
+    {{3|(4<<4)},   {20.36*4, 21.33*3}, 1},
+    {{3|(5<<4)},   {20.36*5.5,21.33*3}, 0},
+    {{3|(7<<4)},   {20.36*7, 21.33*3}, 1},
+    {{3|(8<<4)},   {20.36*8, 21.33*3}, 1},
+    {{3|(9<<4)},   {20.36*9, 21.33*3}, 1},
+    {{3|(10<<4)},  {20.36*10,21.33*3}, 1},
+    {{3|(11<<4)},  {20.36*11,21.33*3}, 1}
+};
+
+void matrix_init_kb(void) {
+  matrix_init_user();
+
+  palSetPadMode(GPIOB, 8, PAL_MODE_OUTPUT_PUSHPULL);
+  palSetPadMode(GPIOB, 9, PAL_MODE_OUTPUT_PUSHPULL);
+
+  palClearPad(GPIOB, 8);
+  palClearPad(GPIOB, 9);
+}
+
+void matrix_scan_kb(void) {
+  matrix_scan_user();
+}
+
+uint32_t layer_state_set_kb(uint32_t state) {
+
+  palClearPad(GPIOB, 8);
+  palClearPad(GPIOB, 9);
+  state = layer_state_set_user(state);
+  uint8_t layer = biton32(state);
+  switch (layer) {
+      case 3:
+        palSetPad(GPIOB, 9);
+        break;
+      case 4:
+        palSetPad(GPIOB, 8);
+        break;
+      case 6:
+        palSetPad(GPIOB, 9);
+        palSetPad(GPIOB, 8);
+        break;
+      default:
+        break;
+    }
+    return state;
+}

keyboards/planck/ez/ez.h

@@ -0,0 +1,107 @@
+/* Copyright 2018 Jack Humbert <jack.humb@gmail.com>
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#pragma once
+
+#include "planck.h"
+
+#define LAYOUT_planck_1x2uC( \
+    k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, \
+    k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, \
+    k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, \
+    k30, k31, k32, k33, k34,    k35,   k36, k37, k38, k39, k3a \
+) \
+{ \
+    { k00, k01, k02, k03, k04, k05 }, \
+    { k10, k11, k12, k13, k14, k15 }, \
+    { k20, k21, k22, k23, k24, k25 }, \
+    { k30, k31, k32, k39, k3a, k3b }, \
+    { k06, k07, k08, k09, k0a, k0b }, \
+    { k16, k17, k18, k19, k1a, k1b }, \
+    { k26, k27, k28, k29, k2a, k2b }, \
+    { k36, k37, k38, k33, k34, k35 } \
+}
+
+#define LAYOUT_planck_1x2uR( \
+    k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, \
+    k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, \
+    k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, \
+    k30, k31, k32, k33, k34, k35,   k36,    k37, k38, k39, k3a \
+) \
+{ \
+    { k00, k01, k02, k03, k04, k05 }, \
+    { k10, k11, k12, k13, k14, k15 }, \
+    { k20, k21, k22, k23, k24, k25 }, \
+    { k30, k31, k32, k39, k3a, k3b }, \
+    { k06, k07, k08, k09, k0a, k0b }, \
+    { k16, k17, k18, k19, k1a, k1b }, \
+    { k26, k27, k28, k29, k2a, k2b }, \
+    { k36, k37, k38, k33, k34, k35 } \
+}
+
+#define LAYOUT_planck_1x2uL( \
+    k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, \
+    k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, \
+    k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, \
+    k30, k31, k32, k33,   k34,    k35, k36, k37, k38, k39, k3a \
+) \
+{ \
+    { k00, k01, k02, k03, k04, k05 }, \
+    { k10, k11, k12, k13, k14, k15 }, \
+    { k20, k21, k22, k23, k24, k25 }, \
+    { k30, k31, k32, k39, k3a, k3b }, \
+    { k06, k07, k08, k09, k0a, k0b }, \
+    { k16, k17, k18, k19, k1a, k1b }, \
+    { k26, k27, k28, k29, k2a, k2b }, \
+    { k36, k37, k38, k33, k34, k35 } \
+}
+
+#define LAYOUT_planck_2x2u( \
+    k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, \
+    k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, \
+    k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, \
+    k30, k31, k32, k33,   k34,      k36,    k37, k38, k39, k3a \
+) \
+{ \
+    { k00, k01, k02, k03, k04, k05 }, \
+    { k10, k11, k12, k13, k14, k15 }, \
+    { k20, k21, k22, k23, k24, k25 }, \
+    { k30, k31, k32, k39, k3a, k3b }, \
+    { k06, k07, k08, k09, k0a, k0b }, \
+    { k16, k17, k18, k19, k1a, k1b }, \
+    { k26, k27, k28, k29, k2a, k2b }, \
+    { k36, k37, k38, k33, k34, k35 } \
+}
+
+#define LAYOUT_planck_grid( \
+    k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, \
+    k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, \
+    k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, \
+    k30, k31, k32, k33, k34, k35, KC_NO, k36, k37, k38, k39, k3a \
+) \
+{ \
+    { k00, k01, k02, k03, k04, k05 }, \
+    { k10, k11, k12, k13, k14, k15 }, \
+    { k20, k21, k22, k23, k24, k25 }, \
+    { k30, k31, k32, k39, k3a, KC_NO }, \
+    { k06, k07, k08, k09, k0a, k0b }, \
+    { k16, k17, k18, k19, k1a, k1b }, \
+    { k26, k27, k28, k29, k2a, k2b }, \
+    { k36, k37, k38, k33, k34, k35 } \
+}
+
+#define KEYMAP LAYOUT_planck_grid
+#define LAYOUT_ortho_4x12 LAYOUT_planck_grid
+#define KC_LAYOUT_ortho_4x12 KC_KEYMAP

keyboards/planck/ez/rules.mk

@@ -0,0 +1,24 @@
+# project specific files
+LAYOUTS += ortho_4x12
+
+# Cortex version
+MCU  = STM32F303
+
+# Build Options
+#   comment out to disable the options.
+#
+BACKLIGHT_ENABLE = no
+BOOTMAGIC_ENABLE = yes  # Virtual DIP switch configuration
+## (Note that for BOOTMAGIC on Teensy LC you have to use a custom .ld script.)
+MOUSEKEY_ENABLE = yes # Mouse keys
+EXTRAKEY_ENABLE = yes # Audio control and System control
+CONSOLE_ENABLE = yes  # Console for debug
+COMMAND_ENABLE = yes    # Commands for debug and configuration
+#SLEEP_LED_ENABLE = yes  # Breathing sleep LED during USB suspend
+NKRO_ENABLE = yes     # USB Nkey Rollover
+CUSTOM_MATRIX = no # Custom matrix file
+AUDIO_ENABLE = yes
+RGBLIGHT_ENABLE = no
+# SERIAL_LINK_ENABLE = yes
+ENCODER_ENABLE = yes
+RGB_MATRIX_ENABLE = IS31FL3737

keyboards/planck/planck.h

@@ -5,6 +5,10 @@
 
 #define encoder_update(clockwise) encoder_update_user(uint8_t index, clockwise)
 
+#ifdef KEYBOARD_planck_ez
+  #include "ez.h"
+#endif
+
 #ifdef __AVR__
 #define LAYOUT_planck_mit( \
 	k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, \
@@ -50,7 +54,7 @@
 #define LAYOUT_ortho_4x12 LAYOUT_planck_grid
 #define KC_LAYOUT_ortho_4x12 KC_KEYMAP
 
-#else
+#elif KEYBOARD_planck_rev6
 
 	#define LAYOUT_planck_1x2uC( \
     k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, \

keyboards/planck/rev6/mcuconf.h

@@ -1,257 +0,0 @@
-/*
-    ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio
-
-    Licensed under the Apache License, Version 2.0 (the "License");
-    you may not use this file except in compliance with the License.
-    You may obtain a copy of the License at
-
-        http://www.apache.org/licenses/LICENSE-2.0
-
-    Unless required by applicable law or agreed to in writing, software
-    distributed under the License is distributed on an "AS IS" BASIS,
-    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-    See the License for the specific language governing permissions and
-    limitations under the License.
-*/
-
-#ifndef MCUCONF_H
-#define MCUCONF_H
-
-/*
- * STM32F3xx drivers configuration.
- * The following settings override the default settings present in
- * the various device driver implementation headers.
- * Note that the settings for each driver only have effect if the whole
- * driver is enabled in halconf.h.
- *
- * IRQ priorities:
- * 15...0       Lowest...Highest.
- *
- * DMA priorities:
- * 0...3        Lowest...Highest.
- */
-
-#define STM32F3xx_MCUCONF
-
-/*
- * HAL driver system settings.
- */
-#define STM32_NO_INIT                       FALSE
-#define STM32_PVD_ENABLE                    FALSE
-#define STM32_PLS                           STM32_PLS_LEV0
-#define STM32_HSI_ENABLED                   TRUE
-#define STM32_LSI_ENABLED                   TRUE
-#define STM32_HSE_ENABLED                   TRUE
-#define STM32_LSE_ENABLED                   FALSE
-#define STM32_SW                            STM32_SW_PLL
-#define STM32_PLLSRC                        STM32_PLLSRC_HSE
-#define STM32_PREDIV_VALUE                  1
-#define STM32_PLLMUL_VALUE                  9
-#define STM32_HPRE                          STM32_HPRE_DIV1
-#define STM32_PPRE1                         STM32_PPRE1_DIV2
-#define STM32_PPRE2                         STM32_PPRE2_DIV2
-#define STM32_MCOSEL                        STM32_MCOSEL_NOCLOCK
-#define STM32_ADC12PRES                     STM32_ADC12PRES_DIV1
-#define STM32_ADC34PRES                     STM32_ADC34PRES_DIV1
-#define STM32_USART1SW                      STM32_USART1SW_PCLK
-#define STM32_USART2SW                      STM32_USART2SW_PCLK
-#define STM32_USART3SW                      STM32_USART3SW_PCLK
-#define STM32_UART4SW                       STM32_UART4SW_PCLK
-#define STM32_UART5SW                       STM32_UART5SW_PCLK
-#define STM32_I2C1SW                        STM32_I2C1SW_SYSCLK
-#define STM32_I2C2SW                        STM32_I2C2SW_SYSCLK
-#define STM32_TIM1SW                        STM32_TIM1SW_PCLK2
-#define STM32_TIM8SW                        STM32_TIM8SW_PCLK2
-#define STM32_RTCSEL                        STM32_RTCSEL_LSI
-#define STM32_USB_CLOCK_REQUIRED            TRUE
-#define STM32_USBPRE                        STM32_USBPRE_DIV1P5
-
-#undef STM32_HSE_BYPASS
-// #error "oh no"
-// #endif
-
-/*
- * ADC driver system settings.
- */
-#define STM32_ADC_DUAL_MODE                 FALSE
-#define STM32_ADC_COMPACT_SAMPLES           FALSE
-#define STM32_ADC_USE_ADC1                  FALSE
-#define STM32_ADC_USE_ADC2                  FALSE
-#define STM32_ADC_USE_ADC3                  FALSE
-#define STM32_ADC_USE_ADC4                  FALSE
-#define STM32_ADC_ADC1_DMA_STREAM           STM32_DMA_STREAM_ID(1, 1)
-#define STM32_ADC_ADC2_DMA_STREAM           STM32_DMA_STREAM_ID(2, 1)
-#define STM32_ADC_ADC3_DMA_STREAM           STM32_DMA_STREAM_ID(2, 5)
-#define STM32_ADC_ADC4_DMA_STREAM           STM32_DMA_STREAM_ID(2, 2)
-#define STM32_ADC_ADC1_DMA_PRIORITY         2
-#define STM32_ADC_ADC2_DMA_PRIORITY         2
-#define STM32_ADC_ADC3_DMA_PRIORITY         2
-#define STM32_ADC_ADC4_DMA_PRIORITY         2
-#define STM32_ADC_ADC12_IRQ_PRIORITY        5
-#define STM32_ADC_ADC3_IRQ_PRIORITY         5
-#define STM32_ADC_ADC4_IRQ_PRIORITY         5
-#define STM32_ADC_ADC1_DMA_IRQ_PRIORITY     5
-#define STM32_ADC_ADC2_DMA_IRQ_PRIORITY     5
-#define STM32_ADC_ADC3_DMA_IRQ_PRIORITY     5
-#define STM32_ADC_ADC4_DMA_IRQ_PRIORITY     5
-#define STM32_ADC_ADC12_CLOCK_MODE          ADC_CCR_CKMODE_AHB_DIV1
-#define STM32_ADC_ADC34_CLOCK_MODE          ADC_CCR_CKMODE_AHB_DIV1
-
-/*
- * CAN driver system settings.
- */
-#define STM32_CAN_USE_CAN1                  FALSE
-#define STM32_CAN_CAN1_IRQ_PRIORITY         11
-
-/*
- * DAC driver system settings.
- */
-#define STM32_DAC_DUAL_MODE                 FALSE
-#define STM32_DAC_USE_DAC1_CH1              TRUE
-#define STM32_DAC_USE_DAC1_CH2              TRUE
-#define STM32_DAC_DAC1_CH1_IRQ_PRIORITY     10
-#define STM32_DAC_DAC1_CH2_IRQ_PRIORITY     10
-#define STM32_DAC_DAC1_CH1_DMA_PRIORITY     2
-#define STM32_DAC_DAC1_CH2_DMA_PRIORITY     2
-
-/*
- * EXT driver system settings.
- */
-#define STM32_EXT_EXTI0_IRQ_PRIORITY        6
-#define STM32_EXT_EXTI1_IRQ_PRIORITY        6
-#define STM32_EXT_EXTI2_IRQ_PRIORITY        6
-#define STM32_EXT_EXTI3_IRQ_PRIORITY        6
-#define STM32_EXT_EXTI4_IRQ_PRIORITY        6
-#define STM32_EXT_EXTI5_9_IRQ_PRIORITY      6
-#define STM32_EXT_EXTI10_15_IRQ_PRIORITY    6
-#define STM32_EXT_EXTI16_IRQ_PRIORITY       6
-#define STM32_EXT_EXTI17_IRQ_PRIORITY       6
-#define STM32_EXT_EXTI18_IRQ_PRIORITY       6
-#define STM32_EXT_EXTI19_IRQ_PRIORITY       6
-#define STM32_EXT_EXTI20_IRQ_PRIORITY       6
-#define STM32_EXT_EXTI21_22_29_IRQ_PRIORITY 6
-#define STM32_EXT_EXTI30_32_IRQ_PRIORITY    6
-#define STM32_EXT_EXTI33_IRQ_PRIORITY       6
-
-/*
- * GPT driver system settings.
- */
-#define STM32_GPT_USE_TIM1                  FALSE
-#define STM32_GPT_USE_TIM2                  FALSE
-#define STM32_GPT_USE_TIM3                  FALSE
-#define STM32_GPT_USE_TIM4                  FALSE
-#define STM32_GPT_USE_TIM6                  TRUE
-#define STM32_GPT_USE_TIM7                  TRUE
-#define STM32_GPT_USE_TIM8                  TRUE
-#define STM32_GPT_TIM1_IRQ_PRIORITY         7
-#define STM32_GPT_TIM2_IRQ_PRIORITY         7
-#define STM32_GPT_TIM3_IRQ_PRIORITY         7
-#define STM32_GPT_TIM4_IRQ_PRIORITY         7
-#define STM32_GPT_TIM6_IRQ_PRIORITY         7
-#define STM32_GPT_TIM7_IRQ_PRIORITY         7
-#define STM32_GPT_TIM8_IRQ_PRIORITY         7
-
-/*
- * I2C driver system settings.
- */
-#define STM32_I2C_USE_I2C1                  FALSE
-#define STM32_I2C_USE_I2C2                  FALSE
-#define STM32_I2C_BUSY_TIMEOUT              50
-#define STM32_I2C_I2C1_IRQ_PRIORITY         10
-#define STM32_I2C_I2C2_IRQ_PRIORITY         10
-#define STM32_I2C_USE_DMA                   TRUE
-#define STM32_I2C_I2C1_DMA_PRIORITY         1
-#define STM32_I2C_I2C2_DMA_PRIORITY         1
-#define STM32_I2C_DMA_ERROR_HOOK(i2cp)      osalSysHalt("DMA failure")
-
-/*
- * ICU driver system settings.
- */
-#define STM32_ICU_USE_TIM1                  FALSE
-#define STM32_ICU_USE_TIM2                  FALSE
-#define STM32_ICU_USE_TIM3                  FALSE
-#define STM32_ICU_USE_TIM4                  FALSE
-#define STM32_ICU_USE_TIM8                  FALSE
-#define STM32_ICU_TIM1_IRQ_PRIORITY         7
-#define STM32_ICU_TIM2_IRQ_PRIORITY         7
-#define STM32_ICU_TIM3_IRQ_PRIORITY         7
-#define STM32_ICU_TIM4_IRQ_PRIORITY         7
-#define STM32_ICU_TIM8_IRQ_PRIORITY         7
-
-/*
- * PWM driver system settings.
- */
-#define STM32_PWM_USE_ADVANCED              FALSE
-#define STM32_PWM_USE_TIM1                  FALSE
-#define STM32_PWM_USE_TIM2                  TRUE
-#define STM32_PWM_USE_TIM3                  TRUE
-#define STM32_PWM_USE_TIM4                  FALSE
-#define STM32_PWM_USE_TIM8                  FALSE
-#define STM32_PWM_TIM1_IRQ_PRIORITY         7
-#define STM32_PWM_TIM2_IRQ_PRIORITY         7
-#define STM32_PWM_TIM3_IRQ_PRIORITY         7
-#define STM32_PWM_TIM4_IRQ_PRIORITY         7
-#define STM32_PWM_TIM8_IRQ_PRIORITY         7
-
-/*
- * SERIAL driver system settings.
- */
-#define STM32_SERIAL_USE_USART1             FALSE
-#define STM32_SERIAL_USE_USART2             TRUE
-#define STM32_SERIAL_USE_USART3             FALSE
-#define STM32_SERIAL_USE_UART4              FALSE
-#define STM32_SERIAL_USE_UART5              FALSE
-#define STM32_SERIAL_USART1_PRIORITY        12
-#define STM32_SERIAL_USART2_PRIORITY        12
-#define STM32_SERIAL_USART3_PRIORITY        12
-#define STM32_SERIAL_UART4_PRIORITY         12
-#define STM32_SERIAL_UART5_PRIORITY         12
-
-/*
- * SPI driver system settings.
- */
-#define STM32_SPI_USE_SPI1                  FALSE
-#define STM32_SPI_USE_SPI2                  FALSE
-#define STM32_SPI_USE_SPI3                  FALSE
-#define STM32_SPI_SPI1_DMA_PRIORITY         1
-#define STM32_SPI_SPI2_DMA_PRIORITY         1
-#define STM32_SPI_SPI3_DMA_PRIORITY         1
-#define STM32_SPI_SPI1_IRQ_PRIORITY         10
-#define STM32_SPI_SPI2_IRQ_PRIORITY         10
-#define STM32_SPI_SPI3_IRQ_PRIORITY         10
-#define STM32_SPI_DMA_ERROR_HOOK(spip)      osalSysHalt("DMA failure")
-
-/*
- * ST driver system settings.
- */
-#define STM32_ST_IRQ_PRIORITY               8
-#define STM32_ST_USE_TIMER                  2
-
-/*
- * UART driver system settings.
- */
-#define STM32_UART_USE_USART1               FALSE
-#define STM32_UART_USE_USART2               FALSE
-#define STM32_UART_USE_USART3               FALSE
-#define STM32_UART_USART1_IRQ_PRIORITY      12
-#define STM32_UART_USART2_IRQ_PRIORITY      12
-#define STM32_UART_USART3_IRQ_PRIORITY      12
-#define STM32_UART_USART1_DMA_PRIORITY      0
-#define STM32_UART_USART2_DMA_PRIORITY      0
-#define STM32_UART_USART3_DMA_PRIORITY      0
-#define STM32_UART_DMA_ERROR_HOOK(uartp)    osalSysHalt("DMA failure")
-
-/*
- * USB driver system settings.
- */
-#define STM32_USB_USE_USB1                  TRUE
-#define STM32_USB_LOW_POWER_ON_SUSPEND      FALSE
-#define STM32_USB_USB1_HP_IRQ_PRIORITY      13
-#define STM32_USB_USB1_LP_IRQ_PRIORITY      14
-
-/*
- * WDG driver system settings.
- */
-#define STM32_WDG_USE_IWDG                  FALSE
-
-#endif /* MCUCONF_H */

keyboards/planck/rev6/rules.mk

@@ -2,41 +2,8 @@
 SRC =	matrix.c
 LAYOUTS += ortho_4x12
 
-## chip/board settings
-# - the next two should match the directories in
-#   <chibios>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES)
-MCU_FAMILY = STM32
-MCU_SERIES = STM32F3xx
-
-# Linker script to use
-# - it should exist either in <chibios>/os/common/ports/ARMCMx/compilers/GCC/ld/
-#   or <this_dir>/ld/
-MCU_LDSCRIPT = STM32F303xC
-
-# Startup code to use
-#  - it should exist in <chibios>/os/common/startup/ARMCMx/compilers/GCC/mk/
-MCU_STARTUP = stm32f3xx
-
-# Board: it should exist either in <chibios>/os/hal/boards/
-#  or <this_dir>/boards
-BOARD = GENERIC_STM32_F303XC
-
 # Cortex version
-MCU  = cortex-m4
-
-# ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7
-ARMV = 7
-
-USE_FPU = yes
-
-# Vector table for application
-# 0x00000000-0x00001000 area is occupied by bootlaoder.*/
-# The CORTEX_VTOR... is needed only for MCHCK/Infinity KB
-# OPT_DEFS = -DCORTEX_VTOR_INIT=0x08005000
-OPT_DEFS =
-
-# Options to pass to dfu-util when flashing
-DFU_ARGS = -d 0483:df11 -a 0 -s 0x08000000:leave
+MCU  = STM32F303
 
 # Build Options
 #   comment out to disable the options.

keyboards/planck/rules.mk

@@ -1,39 +1,6 @@
 # MCU name
-#MCU = at90usb1287
 MCU = atmega32u4
 
-# Processor frequency.
-#     This will define a symbol, F_CPU, in all source code files equal to the
-#     processor frequency in Hz. You can then use this symbol in your source code to
-#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
-#     automatically to create a 32-bit value in your source code.
-#
-#     This will be an integer division of F_USB below, as it is sourced by
-#     F_USB after it has run through any CPU prescalers. Note that this value
-#     does not *change* the processor frequency - it should merely be updated to
-#     reflect the processor speed set externally so that the code can use accurate
-#     software delays.
-F_CPU = 16000000
-
-#
-# LUFA specific
-#
-# Target architecture (see library "Board Types" documentation).
-ARCH = AVR8
-
-# Input clock frequency.
-#     This will define a symbol, F_USB, in all source code files equal to the
-#     input clock frequency (before any prescaling is performed) in Hz. This value may
-#     differ from F_CPU if prescaling is used on the latter, and is required as the
-#     raw input clock is fed directly to the PLL sections of the AVR for high speed
-#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
-#     at the end, this will be done automatically to create a 32-bit value in your
-#     source code.
-#
-#     If no clock division is performed on the input clock inside the AVR (via the
-#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
-F_USB = $(F_CPU)
-
 # Bootloader
 #     This definition is optional, and if your keyboard supports multiple bootloaders of
 #     different sizes, comment this out, and the correct address will be loaded

keyboards/proton_c/boards/GENERIC_STM32_F303XC/board.c

@@ -1,126 +0,0 @@
-/*
-    ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio
-
-    Licensed under the Apache License, Version 2.0 (the "License");
-    you may not use this file except in compliance with the License.
-    You may obtain a copy of the License at
-
-        http://www.apache.org/licenses/LICENSE-2.0
-
-    Unless required by applicable law or agreed to in writing, software
-    distributed under the License is distributed on an "AS IS" BASIS,
-    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-    See the License for the specific language governing permissions and
-    limitations under the License.
-*/
-
-#include "hal.h"
-
-#if HAL_USE_PAL || defined(__DOXYGEN__)
-/**
- * @brief   PAL setup.
- * @details Digital I/O ports static configuration as defined in @p board.h.
- *          This variable is used by the HAL when initializing the PAL driver.
- */
-const PALConfig pal_default_config = {
-#if STM32_HAS_GPIOA
-  {VAL_GPIOA_MODER, VAL_GPIOA_OTYPER, VAL_GPIOA_OSPEEDR, VAL_GPIOA_PUPDR,
-   VAL_GPIOA_ODR,   VAL_GPIOA_AFRL,   VAL_GPIOA_AFRH},
-#endif
-#if STM32_HAS_GPIOB
-  {VAL_GPIOB_MODER, VAL_GPIOB_OTYPER, VAL_GPIOB_OSPEEDR, VAL_GPIOB_PUPDR,
-   VAL_GPIOB_ODR,   VAL_GPIOB_AFRL,   VAL_GPIOB_AFRH},
-#endif
-#if STM32_HAS_GPIOC
-  {VAL_GPIOC_MODER, VAL_GPIOC_OTYPER, VAL_GPIOC_OSPEEDR, VAL_GPIOC_PUPDR,
-   VAL_GPIOC_ODR,   VAL_GPIOC_AFRL,   VAL_GPIOC_AFRH},
-#endif
-#if STM32_HAS_GPIOD
-  {VAL_GPIOD_MODER, VAL_GPIOD_OTYPER, VAL_GPIOD_OSPEEDR, VAL_GPIOD_PUPDR,
-   VAL_GPIOD_ODR,   VAL_GPIOD_AFRL,   VAL_GPIOD_AFRH},
-#endif
-#if STM32_HAS_GPIOE
-  {VAL_GPIOE_MODER, VAL_GPIOE_OTYPER, VAL_GPIOE_OSPEEDR, VAL_GPIOE_PUPDR,
-   VAL_GPIOE_ODR,   VAL_GPIOE_AFRL,   VAL_GPIOE_AFRH},
-#endif
-#if STM32_HAS_GPIOF
-  {VAL_GPIOF_MODER, VAL_GPIOF_OTYPER, VAL_GPIOF_OSPEEDR, VAL_GPIOF_PUPDR,
-   VAL_GPIOF_ODR,   VAL_GPIOF_AFRL,   VAL_GPIOF_AFRH},
-#endif
-#if STM32_HAS_GPIOG
-  {VAL_GPIOG_MODER, VAL_GPIOG_OTYPER, VAL_GPIOG_OSPEEDR, VAL_GPIOG_PUPDR,
-   VAL_GPIOG_ODR,   VAL_GPIOG_AFRL,   VAL_GPIOG_AFRH},
-#endif
-#if STM32_HAS_GPIOH
-  {VAL_GPIOH_MODER, VAL_GPIOH_OTYPER, VAL_GPIOH_OSPEEDR, VAL_GPIOH_PUPDR,
-   VAL_GPIOH_ODR,   VAL_GPIOH_AFRL,   VAL_GPIOH_AFRH},
-#endif
-#if STM32_HAS_GPIOI
-  {VAL_GPIOI_MODER, VAL_GPIOI_OTYPER, VAL_GPIOI_OSPEEDR, VAL_GPIOI_PUPDR,
-   VAL_GPIOI_ODR,   VAL_GPIOI_AFRL,   VAL_GPIOI_AFRH}
-#endif
-};
-#endif
-
-void enter_bootloader_mode_if_requested(void);
-
-/**
- * @brief   Early initialization code.
- * @details This initialization must be performed just after stack setup
- *          and before any other initialization.
- */
-void __early_init(void) {
-  enter_bootloader_mode_if_requested();
-  stm32_clock_init();
-}
-
-#if HAL_USE_SDC || defined(__DOXYGEN__)
-/**
- * @brief   SDC card detection.
- */
-bool sdc_lld_is_card_inserted(SDCDriver *sdcp) {
-
-  (void)sdcp;
-  /* TODO: Fill the implementation.*/
-  return true;
-}
-
-/**
- * @brief   SDC card write protection detection.
- */
-bool sdc_lld_is_write_protected(SDCDriver *sdcp) {
-
-  (void)sdcp;
-  /* TODO: Fill the implementation.*/
-  return false;
-}
-#endif /* HAL_USE_SDC */
-
-#if HAL_USE_MMC_SPI || defined(__DOXYGEN__)
-/**
- * @brief   MMC_SPI card detection.
- */
-bool mmc_lld_is_card_inserted(MMCDriver *mmcp) {
-
-  (void)mmcp;
-  /* TODO: Fill the implementation.*/
-  return true;
-}
-
-/**
- * @brief   MMC_SPI card write protection detection.
- */
-bool mmc_lld_is_write_protected(MMCDriver *mmcp) {
-
-  (void)mmcp;
-  /* TODO: Fill the implementation.*/
-  return false;
-}
-#endif
-
-/**
- * @brief   Board-specific initialization code.
- * @todo    Add your board-specific code, if any.
- */
-void boardInit(void) {
-}

keyboards/proton_c/boards/GENERIC_STM32_F303XC/board.mk

@@ -1,5 +0,0 @@
-# List of all the board related files.
-BOARDSRC = $(BOARD_PATH)/boards/GENERIC_STM32_F303XC/board.c
-
-# Required include directories
-BOARDINC = $(BOARD_PATH)/boards/GENERIC_STM32_F303XC

keyboards/proton_c/bootloader_defs.h

@@ -1,7 +0,0 @@
-/* Address for jumping to bootloader on STM32 chips. */
-/* It is chip dependent, the correct number can be looked up here:
- * http://www.st.com/web/en/resource/technical/document/application_note/CD00167594.pdf
- * This also requires a patch to chibios:
- *  <tmk_dir>/tmk_core/tool/chibios/ch-bootloader-jump.patch
- */
-#define STM32_BOOTLOADER_ADDRESS 0x1FFFD800

keyboards/proton_c/config.h

@@ -33,7 +33,6 @@
 #define MATRIX_ROW_PINS { B9 }
 #define MATRIX_COL_PINS { B0 }
 
-
 /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
 #define DEBOUNCE 6
 

keyboards/proton_c/rules.mk

@@ -1,38 +1,4 @@
-## chip/board settings
-# - the next two should match the directories in
-#   <chibios>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES)
-MCU_FAMILY = STM32
-MCU_SERIES = STM32F3xx
-
-# Linker script to use
-# - it should exist either in <chibios>/os/common/ports/ARMCMx/compilers/GCC/ld/
-#   or <this_dir>/ld/
-MCU_LDSCRIPT = STM32F303xC
-
-# Startup code to use
-#  - it should exist in <chibios>/os/common/startup/ARMCMx/compilers/GCC/mk/
-MCU_STARTUP = stm32f3xx
-
-# Board: it should exist either in <chibios>/os/hal/boards/
-#  or <this_dir>/boards
-BOARD = GENERIC_STM32_F303XC
-
-# Cortex version
-MCU  = cortex-m4
-
-# ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7
-ARMV = 7
-
-USE_FPU = yes
-
-# Vector table for application
-# 0x00000000-0x00001000 area is occupied by bootlaoder.*/
-# The CORTEX_VTOR... is needed only for MCHCK/Infinity KB
-# OPT_DEFS = -DCORTEX_VTOR_INIT=0x08005000
-OPT_DEFS =
-
-# Options to pass to dfu-util when flashing
-DFU_ARGS = -d 0483:df11 -a 0 -s 0x08000000:leave
+MCU = STM32F303
 
 # Build Options
 #   comment out to disable the options.