mirror of https://github.com/qmk/qmk_firmware synced 2024-12-23 00:48:13 +00:00

Refactor Leader key feature (#19632 )

Co-authored-by: Drashna Jaelre <drashna@live.com>

2023-02-13 03:19:02 +11:00

8.9 KiB

Raw Blame History

The Leader Key: A New Kind of Modifier :id=the-leader-key

If you're a Vim user, you probably know what a Leader key is. In contrast to Combos, the Leader key allows you to hit a sequence of up to five keys instead, which triggers some custom functionality once complete.

Usage :id=usage

Add the following to your rules.mk:

LEADER_ENABLE = yes

Then add the QK_LEAD keycode to your keymap.

Callbacks :id=callbacks

These callbacks are invoked when the leader sequence begins and ends. In the latter you can implement your custom functionality based on the contents of the sequence buffer.

void leader_start_user(void) {
    // Do something when the leader key is pressed
}

void leader_end_user(void) {
    if (leader_sequence_one_key(KC_F)) {
        // Leader, f => Types the below string
        SEND_STRING("QMK is awesome.");
    } else if (leader_sequence_two_keys(KC_D, KC_D)) {
        // Leader, d, d => Ctrl+A, Ctrl+C
        SEND_STRING(SS_LCTL("a") SS_LCTL("c"));
    } else if (leader_sequence_three_keys(KC_D, KC_D, KC_S)) {
        // Leader, d, d, s => Types the below string
        SEND_STRING("https://start.duckduckgo.com\n");
    } else if (leader_sequence_two_keys(KC_A, KC_S)) {
        // Leader, a, s => GUI+S
        tap_code16(LGUI(KC_S));
    }
}

Basic Configuration :id=basic-configuration

Timeout :id=timeout

This is the amount of time you have to complete a sequence once the leader key has been pressed. The default value is 300 milliseconds, but you can change this by adding the following to your config.h:

#define LEADER_TIMEOUT 350

Per-Key Timeout :id=per-key-timeout

Rather than relying on an incredibly high timeout for long leader key strings or those of us without 200 wpm typing skills, you can enable per-key timing to ensure that each key pressed provides you with more time to finish the sequence. This is incredibly helpful with leader key emulation of tap dance (such as multiple taps of the same key like C, C, C).

To enable this, add the following to your config.h:

#define LEADER_PER_KEY_TIMING

After this, it's recommended that you lower your timeout below 300 ms:

#define LEADER_TIMEOUT 250

Now, something like this won't seem impossible to do without a 1000 millisecond timeout:

if (leader_sequence_three_keys(KC_C, KC_C, KC_C)) {
    SEND_STRING("Per key timing is great!!!");
}

Disabling Initial Timeout :id=disabling-initial-timeout

Sometimes your leader key may be too far away from the rest of the keys in the sequence. Imagine that your leader key is one of your outer top right keys - you may need to reposition your hand just to reach your leader key. This can make typing the entire sequence on time hard difficult if you are able to type most of the sequence fast. For example, if your sequence is Leader + asd, typing asd fast is very easy once you have your hands in your home row, but starting the sequence in time after moving your hand out of the home row to reach the leader key and back is not.

To remove the stress this situation produces to your hands, you can disable the timeout just for the leader key. Add the following to your config.h:

#define LEADER_NO_TIMEOUT

Now, after you hit the leader key, you will have an infinite amount of time to start the rest of the sequence, allowing you to properly position your hands to type the rest of the sequence comfortably. This way you can configure a very short LEADER_TIMEOUT, but still have plenty of time to position your hands.

Strict Key Processing :id=strict-key-processing

By default, only the "tap keycode" portions of Mod-Taps and Layer Taps are added to the sequence buffer. This means if you press eg. LT(3, KC_A) as part of a sequence, KC_A will be added to the buffer, rather than the entire LT(3, KC_A) keycode.

This gives a more expected behaviour for most users, however you may want to change this.

To enable this, add the following to your config.h:

#define LEADER_KEY_STRICT_KEY_PROCESSING

Example :id=example

This example will play the Mario "One Up" sound when you hit QK_LEAD to start the leader sequence. When the sequence ends, it will play "All Star" if it completes successfully or "Rick Roll" you if it fails (in other words, no sequence matched).

#ifdef AUDIO_ENABLE
float leader_start_song[][2] = SONG(ONE_UP_SOUND);
float leader_succeed_song[][2] = SONG(ALL_STAR);
float leader_fail_song[][2] = SONG(RICK_ROLL);
#endif

void leader_start_user(void) {
#ifdef AUDIO_ENABLE
    PLAY_SONG(leader_start_song);
#endif
}

void leader_end_user(void) {
    bool did_leader_succeed = false;

    if (leader_sequence_one_key(KC_E)) {
        SEND_STRING(SS_LCTL(SS_LSFT("t")));
        did_leader_succeed = true;
    } else if (leader_sequence_two_keys(KC_E, KC_D)) {
        SEND_STRING(SS_LGUI("r") "cmd\n" SS_LCTL("c"));
        did_leader_succeed = true;
    }

#ifdef AUDIO_ENABLE
    if (did_leader_succeed) {
        PLAY_SONG(leader_succeed_song);
    } else {
        PLAY_SONG(leader_fail_song);
    }
#endif
}

Keycodes :id=keycodes

Key	Aliases	Description
`QK_LEADER`	`QK_LEAD`	Begin the leader sequence

API :id=api

`void leader_start_user(void)` :id=api-leader-start-user

User callback, invoked when the leader sequence begins.

`void leader_end_user(void)` :id=api-leader-end-user

User callback, invoked when the leader sequence ends.

`void leader_start(void)` :id=api-leader-start

Begin the leader sequence, resetting the buffer and timer.

`void leader_end(void)` :id=api-leader-end

End the leader sequence.

`bool leader_sequence_active(void)` :id=api-leader-sequence-active

Whether the leader sequence is active.

`bool leader_sequence_add(uint16_t keycode)` :id=api-leader-sequence-add

Add the given keycode to the sequence buffer.

If LEADER_NO_TIMEOUT is defined, the timer is reset if the buffer is empty.

Arguments :id=api-leader-sequence-add-arguments

uint16_t keycode
The keycode to add.

Return Value :id=api-leader-sequence-add-return

true if the keycode was added, false if the buffer is full.

`bool leader_sequence_timed_out(void)` :id=api-leader-sequence-timed-out

Whether the leader sequence has reached the timeout.

If LEADER_NO_TIMEOUT is defined, the buffer must also contain at least one key.

`bool leader_reset_timer(void)` :id=api-leader-reset-timer

Reset the leader sequence timer.

`bool leader_sequence_one_key(uint16_t kc)` :id=api-leader-sequence-one-key

Check the sequence buffer for the given keycode.