mirror of
https://github.com/qmk/qmk_firmware
synced 2024-12-22 16:36:58 +00:00
114 lines
5.1 KiB
Markdown
114 lines
5.1 KiB
Markdown
# Miscellaneous FAQ
|
|
|
|
## How do I test my keyboard? {#testing}
|
|
|
|
Testing your keyboard is usually pretty straightforward. Press every single key and make sure it sends the keys you expect. You can use [QMK Configurator](https://config.qmk.fm/#/test/)'s test mode to check your keyboard, even if it doesn't run QMK.
|
|
|
|
## Safety Considerations
|
|
|
|
You probably don't want to "brick" your keyboard, making it impossible
|
|
to rewrite firmware onto it. Here are some of the parameters to show
|
|
what things are (and likely aren't) too risky.
|
|
|
|
- If your keyboard map does not include QK_BOOT, then, to get into DFU
|
|
mode, you will need to press the reset button on the PCB, which
|
|
requires unscrewing the bottom.
|
|
- Messing with tmk_core / common files might make the keyboard
|
|
inoperable
|
|
- Too large a .hex file is trouble; `make dfu` will erase the block,
|
|
test the size (oops, wrong order!), which errors out, failing to
|
|
flash the keyboard, leaving it in DFU mode.
|
|
- To this end, note that the maximum .hex file size on e.g. Planck
|
|
is 7000h (28672 decimal)
|
|
|
|
```
|
|
Linking: .build/planck_rev4_cbbrowne.elf [OK]
|
|
Creating load file for Flash: .build/planck_rev4_cbbrowne.hex [OK]
|
|
|
|
Size after:
|
|
text data bss dec hex filename
|
|
0 22396 0 22396 577c planck_rev4_cbbrowne.hex
|
|
```
|
|
|
|
- The above file is of size 22396/577ch, which is less than
|
|
28672/7000h
|
|
- As long as you have a suitable alternative .hex file around, you
|
|
can retry, loading that one
|
|
- Some of the options you might specify in your keyboard's Makefile
|
|
consume extra memory; watch out for BOOTMAGIC_ENABLE,
|
|
MOUSEKEY_ENABLE, EXTRAKEY_ENABLE, CONSOLE_ENABLE
|
|
- DFU tools do /not/ allow you to write into the bootloader (unless
|
|
you throw in an extra fruit salad of options), so there is little risk
|
|
there.
|
|
- EEPROM has around a 100000 (100k) write cycle. You shouldn't rewrite
|
|
the firmware repeatedly and continually; that'll burn the EEPROM
|
|
eventually.
|
|
|
|
## NKRO Doesn't work
|
|
First you have to compile firmware with the build option `NKRO_ENABLE` in **Makefile**.
|
|
|
|
Try `Magic` **N** command(`LShift+RShift+N` by default) when **NKRO** still doesn't work. You can use this command to toggle between **NKRO** and **6KRO** mode temporarily. In some situations **NKRO** doesn't work and you will need to switch to **6KRO** mode, in particular when you are in BIOS.
|
|
|
|
|
|
## TrackPoint Needs Reset Circuit (PS/2 Mouse Support)
|
|
Without reset circuit you will have inconsistent result due to improper initialization of the hardware. See circuit schematic of TPM754:
|
|
|
|
- https://geekhack.org/index.php?topic=50176.msg1127447#msg1127447
|
|
- https://www.mikrocontroller.net/attachment/52583/tpm754.pdf
|
|
|
|
|
|
## Can't Read Column of Matrix Beyond 16
|
|
Use `1UL<<16` instead of `1<<16` in `read_cols()` in [matrix.h] when your columns goes beyond 16.
|
|
|
|
In C `1` means one of [int] type which is [16 bit] in case of AVR, so you can't shift left more than 15. Thus, calculating `1<<16` will unexpectedly equal zero. To work around this, you have to use [unsigned long] type with `1UL`.
|
|
|
|
https://deskthority.net/workshop-f7/rebuilding-and-redesigning-a-classic-thinkpad-keyboard-t6181-60.html#p146279
|
|
|
|
## Special Extra Key Doesn't Work (System, Audio Control Keys)
|
|
You need to define `EXTRAKEY_ENABLE` in `rules.mk` to use them in QMK.
|
|
|
|
```
|
|
EXTRAKEY_ENABLE = yes # Audio control and System control
|
|
```
|
|
|
|
## Wake from Sleep Doesn't Work
|
|
|
|
In Windows check `Allow this device to wake the computer` setting in **Power Management** property tab of **Device Manager**. Also check your BIOS settings. Pressing any key during sleep should wake host.
|
|
|
|
## Using Arduino?
|
|
|
|
**Note that Arduino pin naming is different from actual chip.** For example, Arduino pin `D0` is not `PD0`. Check circuit with its schematics yourself.
|
|
|
|
- https://arduino.cc/en/uploads/Main/arduino-leonardo-schematic_3b.pdf
|
|
- https://arduino.cc/en/uploads/Main/arduino-micro-schematic.pdf
|
|
|
|
Arduino Leonardo and micro have **ATMega32U4** and can be used for TMK, though Arduino bootloader may be a problem.
|
|
|
|
## Enabling JTAG
|
|
|
|
By default, the JTAG debugging interface is disabled as soon as the keyboard starts up. JTAG-capable MCUs come from the factory with the `JTAGEN` fuse set, and it takes over certain pins of the MCU that the board may be using for the switch matrix, LEDs, etc.
|
|
|
|
If you would like to keep JTAG enabled, just add the following to your `config.h`:
|
|
|
|
```c
|
|
#define NO_JTAG_DISABLE
|
|
```
|
|
|
|
## USB 3 Compatibility
|
|
Some problems can be fixed by switching from a USB 3.x port to a USB 2.0 port.
|
|
|
|
|
|
## Mac Compatibility
|
|
### OS X 10.11 and Hub
|
|
See here: https://geekhack.org/index.php?topic=14290.msg1884034#msg1884034
|
|
|
|
|
|
## Problem in BIOS (UEFI) Setup/Resume (Sleep & Wake)/Power Cycles
|
|
Some people reported their keyboard stops working in BIOS and/or after resume(power cycles).
|
|
|
|
As of now the root cause is not clear, but some build options seem to be related. In Makefile, try to disable options like `CONSOLE_ENABLE`, `NKRO_ENABLE`, `SLEEP_LED_ENABLE` and/or others.
|
|
|
|
More info:
|
|
- https://github.com/tmk/tmk_keyboard/issues/266
|
|
- https://geekhack.org/index.php?topic=41989.msg1967778#msg1967778
|