History

Migrate LOCKING_*_ENABLE to Data-Driven: E (#23751 )

Affects:

  - `e88`
  - `ealdin/quadrant`
  - `earth_rover`
  - `eco`
  - `edc40`
  - `edi/standaside`
  - `eek`
  - `ein_60`
  - `eniigmakeyboards/ek65`
  - `eniigmakeyboards/ek87`
  - `ep/96`
  - `ep/comsn/hs68`
  - `ep/comsn/mollydooker`
  - `ep/comsn/tf_longeboye`
  - `ergodox_ez`
  - `ergotravel/rev1`
  - `eternal_keypad`
  - `evil80`
  - `evolv`
  - `evyd13/atom47/rev2`
  - `evyd13/atom47/rev5`
  - `evyd13/eon65`
  - `evyd13/eon75`
  - `evyd13/eon87`
  - `evyd13/eon95`
  - `evyd13/gh80_1800`
  - `evyd13/gh80_3700`
  - `evyd13/minitomic`
  - `evyd13/mx5160`
  - `evyd13/nt750`
  - `evyd13/nt980`
  - `evyd13/omrontkl`
  - `evyd13/quackfire`
  - `evyd13/solheim68`
  - `evyd13/ta65`
  - `evyd13/wasdat_code`
  - `exclusive/e65`
  - `exclusive/e7v1`
  - `exclusive/e7v1se`
  - `exclusive/e85/hotswap`
  - `exclusive/e85/soldered`

2024-05-20 20:40:23 +01:00

keyboard.json

Migrate LOCKING_*_ENABLE to Data-Driven: E (#23751 )

2024-05-20 20:40:23 +01:00

readme.md

…

readme.md

Atom47 rev2

This is the keymap for rev2 of the Atom47. Only 9 of those have been sold for testing purposes. It had a slightly misaligned usb port and the pcb was too thick (should've been 1.2mm instead of 1.6mm). The pcb only supports the default hardware layout, although /u/ChrisSwires has modified his and put a big spacebar in it.

Support

Keyboard Maintainer: Matthew Kerfoot
Hardware Supported: Atom47 rev2
Hardware Availability: None

Features

QMK Firmware
In-switch leds
Through-hole micro usb connector (less likely to break off!)
Easily reachable reset button under the spacebar
In-switch CapsLock indicator

Build

To build the default keymap, simply run make atom47/rev2:default.

For an alternative, heavily modified layout you would just need to run make atom47/rev2:LEdiodes.

See build environment setup then the make instructions for more information.