kc60se
- Keyboard Maintainer: Blake C. Lewis, MechMerlin
- Hardware Supported: KC60SE
- Hardware Availability: PCB is no longer available
Description:
- 60% keyboard PCB;
- supports ANSI, ISO, and HHKB layouts.
Enter the Bootloader
- New firmware, with Bootmagic Lite:
- holding down Esc while plugging in USB.
- As delivered, with Full Bootmagic (deprecated):
- unplug keyboard;
- while holding down 'Space' 'B', plug in USB cable and continue to hold for 8 seconds;
- 'lsusb' should report 'Atmel Corp. atmega32u4 DFU bootloader' instead of 'feed 6060';
- in bootloader LEDs are off & keyboard does not work.
- Hardware way:
- momentary jump pads 5 & 6 to enter bootloader;
Compile the default keymap:
make kc60se:default
See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.
NKRO
- N or 6 Key Rollover NKRO/6KRO
- navigating bios of computer may require 6KRO
- default keymap has fn(T) mapped to toggle NKRO/6KRO
- test: press 8 keys at same time, if 6, then 6KRO, if 8, then NKRO
DIP switches enable/disable GUI keys, the second keys from the ends on the bottom row:
- K41/K4C are WIN/GUI and will disrupt games;
- Add keycodes GUI_ON and GUI_OFF to your function layer to switch on/off GUI keys. It is eaier than flipping the dip switches;
dip keys
#1 #2 K41 K4C
1 1 1 1 both keys enabled
1 0 0 1
0 1 1 0
0 0 0 0 both keys disabled
ISP header next to the ATmega32U4:
- if you can't get into bootloader, while keyboard is on, momentary jump pad 5 to pad 6
2 4 6
: : :
1 3 5
1 - B3 MISO, column 13, square pad
2 - VCC
3 - B1 SCLK, column 7
4 - B2 MOSI, caplock led
5 - Reset | momentary jump 5 and 6
6 - Ground | to enter Bootloader