lunny/qmk_firmware
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity
qmk_firmware/quantum/command.c
Stefan Kerkmann 3f9d464412
[Core] usb_device_state: consolidate usb state handling across implementations (#24258) 
* usb_device_state: add idle_rate, led and protocol

Previously all usb drivers and platform implementations (expect for our
oddball atsam) tracked the same two global variables:

- keyboard_protocol: to indicate if we are in report or boot protocol
- keyboard_idle: for the idle_rate of the keyboard endpoint

And a local variable that was exposed trough some indirection:

- keyboard_led_state: for the currently set indicator leds (caps lock etc.)

These have all been moved into the usb_device_state struct wich is
accessible by getters and setters.

This reduces code duplication and centralizes the state management
across platforms and drivers.

Signed-off-by: Stefan Kerkmann <karlk90@pm.me>

* usb_device_state: reset protocol on reset

The usb hid specification section 7.2.6 states:

When initialized, all devices default to report protocol. However the
host should not make any assumptions about the device’s state and should
set the desired protocol whenever initializing a device.

Thus on reset we should always do exactly that.

Signed-off-by: Stefan Kerkmann <karlk90@pm.me>

* keyboards: fix oversize warnings

Signed-off-by: Stefan Kerkmann <karlk90@pm.me>

---------

Signed-off-by: Stefan Kerkmann <karlk90@pm.me>
2024-10-18 09:57:08 +02:00

745 lines
19 KiB
C
Raw Permalink Blame History

/*
Copyright 2011 Jun Wako <wakojun@gmail.com>
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#include <stdint.h>
#include <stdbool.h>
#include "wait.h"
#include "keycode.h"
#include "host.h"
#include "print.h"
#include "debug.h"
#include "util.h"
#include "timer.h"
#include "keyboard.h"
#include "bootloader.h"
#include "action_layer.h"
#include "action_util.h"
#include "eeconfig.h"
#include "sleep_led.h"
#include "led.h"
#include "command.h"
#include "quantum.h"
#include "usb_device_state.h"
#include "version.h"
#ifdef BACKLIGHT_ENABLE
# include "backlight.h"
#endif
#if defined(MOUSEKEY_ENABLE)
# include "mousekey.h"
#endif
#ifdef AUDIO_ENABLE
# include "audio.h"
#endif /* AUDIO_ENABLE */
static bool command_common(uint8_t code);
static void command_common_help(void);
static void print_version(void);
static void print_status(void);
static bool command_console(uint8_t code);
static void command_console_help(void);
#if defined(MOUSEKEY_ENABLE)
static bool mousekey_console(uint8_t code);
#endif
static void switch_default_layer(uint8_t layer);
command_state_t command_state = ONESHOT;
bool command_proc(uint8_t code) {
switch (command_state) {
case ONESHOT:
if (!IS_COMMAND()) return false;
return (command_extra(code) || command_common(code));
break;
case CONSOLE:
if (IS_COMMAND())
return (command_extra(code) || command_common(code));
else
return (command_console_extra(code) || command_console(code));
break;
#if defined(MOUSEKEY_ENABLE)
case MOUSEKEY:
mousekey_console(code);
break;
#endif
default:
command_state = ONESHOT;
return false;
}
return true;
}
/* TODO: Refactoring is needed. */
/* This allows to define extra commands. return false when not processed. */
bool command_extra(uint8_t code) __attribute__((weak));
bool command_extra(uint8_t code) {
(void)code;
return false;
}
bool command_console_extra(uint8_t code) __attribute__((weak));
bool command_console_extra(uint8_t code) {
(void)code;
return false;
}
/***********************************************************
* Command common
***********************************************************/
static void command_common_help(void) {
print(/* clang-format off */
"\n\t- Magic -\n"
STR(MAGIC_KEY_DEBUG) ": Debug Message Toggle\n"
STR(MAGIC_KEY_DEBUG_MATRIX) ": Matrix Debug Mode Toggle"
" - Show keypresses in matrix grid\n"
STR(MAGIC_KEY_DEBUG_KBD) ": Keyboard Debug Toggle"
" - Show keypress report\n"
STR(MAGIC_KEY_DEBUG_MOUSE) ": Debug Mouse Toggle\n"
STR(MAGIC_KEY_VERSION) ": Version\n"
STR(MAGIC_KEY_STATUS) ": Status\n"
STR(MAGIC_KEY_CONSOLE) ": Activate Console Mode\n"
#if MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM
STR(MAGIC_KEY_LAYER0) ": Switch to Layer 0\n"
STR(MAGIC_KEY_LAYER1) ": Switch to Layer 1\n"
STR(MAGIC_KEY_LAYER2) ": Switch to Layer 2\n"
STR(MAGIC_KEY_LAYER3) ": Switch to Layer 3\n"
STR(MAGIC_KEY_LAYER4) ": Switch to Layer 4\n"
STR(MAGIC_KEY_LAYER5) ": Switch to Layer 5\n"
STR(MAGIC_KEY_LAYER6) ": Switch to Layer 6\n"
STR(MAGIC_KEY_LAYER7) ": Switch to Layer 7\n"
STR(MAGIC_KEY_LAYER8) ": Switch to Layer 8\n"
STR(MAGIC_KEY_LAYER9) ": Switch to Layer 9\n"
#endif
#if MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS
"F1-F10: Switch to Layer 0-9 (F10 = L0)\n"
#endif
#if MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS
"0-9: Switch to Layer 0-9\n"
#endif
STR(MAGIC_KEY_LAYER0_ALT) ": Switch to Layer 0 (alternate)\n"
STR(MAGIC_KEY_BOOTLOADER) ": Jump to Bootloader\n"
STR(MAGIC_KEY_BOOTLOADER_ALT) ": Jump to Bootloader (alternate)\n"
#ifdef KEYBOARD_LOCK_ENABLE
STR(MAGIC_KEY_LOCK) ": Lock Keyboard\n"
#endif
STR(MAGIC_KEY_EEPROM) ": Print EEPROM Settings\n"
STR(MAGIC_KEY_EEPROM_CLEAR) ": Clear EEPROM\n"
#ifdef NKRO_ENABLE
STR(MAGIC_KEY_NKRO) ": NKRO Toggle\n"
#endif
#ifdef SLEEP_LED_ENABLE
STR(MAGIC_KEY_SLEEP_LED) ": Sleep LED Test\n"
#endif
); /* clang-format on */
}
static void print_version(void) {
xprintf("%s", /* clang-format off */
"\n\t- Version -\n"
"VID: " STR(VENDOR_ID) "(" STR(MANUFACTURER) ") "
"PID: " STR(PRODUCT_ID) "(" STR(PRODUCT) ") "
"VER: " STR(DEVICE_VER) "\n"
"BUILD: (" __DATE__ ")\n"
#ifndef SKIP_VERSION
# ifdef PROTOCOL_CHIBIOS
"CHIBIOS: " STR(CHIBIOS_VERSION)
", CONTRIB: " STR(CHIBIOS_CONTRIB_VERSION) "\n"
# endif
#endif
/* build options */
"OPTIONS:"
#ifdef PROTOCOL_LUFA
" LUFA"
#endif
#ifdef PROTOCOL_VUSB
" VUSB"
#endif
#ifdef BOOTMAGIC_ENABLE
" BOOTMAGIC"
#endif
#ifdef MOUSEKEY_ENABLE
" MOUSEKEY"
#endif
#ifdef EXTRAKEY_ENABLE
" EXTRAKEY"
#endif
#ifdef CONSOLE_ENABLE
" CONSOLE"
#endif
#ifdef COMMAND_ENABLE
" COMMAND"
#endif
#ifdef NKRO_ENABLE
" NKRO"
#endif
#ifdef LTO_ENABLE
" LTO"
#endif
" " STR(BOOTLOADER_SIZE) "\n"
"GCC: " STR(__GNUC__)
"." STR(__GNUC_MINOR__)
"." STR(__GNUC_PATCHLEVEL__)
#if defined(__AVR__)
" AVR-LIBC: " __AVR_LIBC_VERSION_STRING__
" AVR_ARCH: avr" STR(__AVR_ARCH__)
#endif
"\n"
); /* clang-format on */
}
static void print_status(void) {
xprintf(/* clang-format off */
"\n\t- Status -\n"
"host_keyboard_leds(): %02X\n"
"keyboard_protocol: %02X\n"
"keyboard_idle: %02X\n"
#ifdef NKRO_ENABLE
"keymap_config.nkro: %02X\n"
#endif
"timer_read32(): %08lX\n"
, host_keyboard_leds()
, usb_device_state_get_protocol()
, usb_device_state_get_idle_rate()
#ifdef NKRO_ENABLE
, keymap_config.nkro
#endif
, timer_read32()
); /* clang-format on */
}
#if !defined(NO_PRINT) && !defined(USER_PRINT)
static void print_eeconfig(void) {
xprintf("eeconfig:\ndefault_layer: %u\n", eeconfig_read_default_layer());
debug_config_t dc;
dc.raw = eeconfig_read_debug();
xprintf(/* clang-format off */
"debug_config.raw: %02X\n"
".enable: %u\n"
".matrix: %u\n"
".keyboard: %u\n"
".mouse: %u\n"
, dc.raw
, dc.enable
, dc.matrix
, dc.keyboard
, dc.mouse
); /* clang-format on */
keymap_config_t kc;
kc.raw = eeconfig_read_keymap();
xprintf(/* clang-format off */
"keymap_config.raw: %02X\n"
".swap_control_capslock: %u\n"
".capslock_to_control: %u\n"
".swap_lctl_lgui: %u\n"
".swap_rctl_rgui: %u\n"
".swap_lalt_lgui: %u\n"
".swap_ralt_rgui: %u\n"
".no_gui: %u\n"
".swap_grave_esc: %u\n"
".swap_backslash_backspace: %u\n"
".nkro: %u\n"
".swap_escape_capslock: %u\n"
, kc.raw
, kc.swap_control_capslock
, kc.capslock_to_control
, kc.swap_lctl_lgui
, kc.swap_rctl_rgui
, kc.swap_lalt_lgui
, kc.swap_ralt_rgui
, kc.no_gui
, kc.swap_grave_esc
, kc.swap_backslash_backspace
, kc.nkro
, kc.swap_escape_capslock
); /* clang-format on */
# ifdef BACKLIGHT_ENABLE
backlight_config_t bc;
bc.raw = eeconfig_read_backlight();
xprintf(/* clang-format off */
"backlight_config"
".raw: %02X\n"
".enable: %u\n"
".level: %u\n"
, bc.raw
, bc.enable
, bc.level
); /* clang-format on */
# endif /* BACKLIGHT_ENABLE */
}
#endif /* !NO_PRINT && !USER_PRINT */
static bool command_common(uint8_t code) {
#ifdef KEYBOARD_LOCK_ENABLE
static host_driver_t *host_driver = 0;
#endif
switch (code) {
#ifdef SLEEP_LED_ENABLE
// test breathing sleep LED
case MAGIC_KC(MAGIC_KEY_SLEEP_LED):
print("Sleep LED Test\n");
sleep_led_toggle();
led_set(host_keyboard_leds());
break;
#endif
// print stored eeprom config
case MAGIC_KC(MAGIC_KEY_EEPROM):
#if !defined(NO_PRINT) && !defined(USER_PRINT)
print_eeconfig();
#endif /* !NO_PRINT && !USER_PRINT */
break;
// clear eeprom
case MAGIC_KC(MAGIC_KEY_EEPROM_CLEAR):
print("Clearing EEPROM\n");
eeconfig_init();
break;
#ifdef KEYBOARD_LOCK_ENABLE
// lock/unlock keyboard
case MAGIC_KC(MAGIC_KEY_LOCK):
if (host_get_driver()) {
host_driver = host_get_driver();
clear_keyboard();
host_set_driver(0);
print("Locked.\n");
} else {
host_set_driver(host_driver);
print("Unlocked.\n");
}
break;
#endif
// print help
case MAGIC_KC(MAGIC_KEY_HELP):
case MAGIC_KC(MAGIC_KEY_HELP_ALT):
command_common_help();
break;
// activate console
case MAGIC_KC(MAGIC_KEY_CONSOLE):
debug_matrix = false;
debug_keyboard = false;
debug_mouse = false;
debug_enable = false;
command_console_help();
print("C> ");
command_state = CONSOLE;
break;
// jump to bootloader
case MAGIC_KC(MAGIC_KEY_BOOTLOADER):
case MAGIC_KC(MAGIC_KEY_BOOTLOADER_ALT):
print("\n\nJumping to bootloader... ");
reset_keyboard();
break;
// debug toggle
case MAGIC_KC(MAGIC_KEY_DEBUG):
debug_enable = !debug_enable;
if (debug_enable) {
print("\ndebug: on\n");
} else {
print("\ndebug: off\n");
debug_matrix = false;
debug_keyboard = false;
debug_mouse = false;
}
break;
// debug matrix toggle
case MAGIC_KC(MAGIC_KEY_DEBUG_MATRIX):
debug_matrix = !debug_matrix;
if (debug_matrix) {
print("\nmatrix: on\n");
debug_enable = true;
} else {
print("\nmatrix: off\n");
}
break;
// debug keyboard toggle
case MAGIC_KC(MAGIC_KEY_DEBUG_KBD):
debug_keyboard = !debug_keyboard;
if (debug_keyboard) {
print("\nkeyboard: on\n");
debug_enable = true;
} else {
print("\nkeyboard: off\n");
}
break;
// debug mouse toggle
case MAGIC_KC(MAGIC_KEY_DEBUG_MOUSE):
debug_mouse = !debug_mouse;
if (debug_mouse) {
print("\nmouse: on\n");
debug_enable = true;
} else {
print("\nmouse: off\n");
}
break;
// print version
case MAGIC_KC(MAGIC_KEY_VERSION):
print_version();
break;
// print status
case MAGIC_KC(MAGIC_KEY_STATUS):
print_status();
break;
#ifdef NKRO_ENABLE
// NKRO toggle
case MAGIC_KC(MAGIC_KEY_NKRO):
clear_keyboard(); // clear to prevent stuck keys
keymap_config.nkro = !keymap_config.nkro;
if (keymap_config.nkro) {
print("NKRO: on\n");
} else {
print("NKRO: off\n");
}
break;
#endif
// switch layers
case MAGIC_KC(MAGIC_KEY_LAYER0_ALT):
switch_default_layer(0);
break;
#if MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM
case MAGIC_KC(MAGIC_KEY_LAYER0):
switch_default_layer(0);
break;
case MAGIC_KC(MAGIC_KEY_LAYER1):
switch_default_layer(1);
break;
case MAGIC_KC(MAGIC_KEY_LAYER2):
switch_default_layer(2);
break;
case MAGIC_KC(MAGIC_KEY_LAYER3):
switch_default_layer(3);
break;
case MAGIC_KC(MAGIC_KEY_LAYER4):
switch_default_layer(4);
break;
case MAGIC_KC(MAGIC_KEY_LAYER5):
switch_default_layer(5);
break;
case MAGIC_KC(MAGIC_KEY_LAYER6):
switch_default_layer(6);
break;
case MAGIC_KC(MAGIC_KEY_LAYER7):
switch_default_layer(7);
break;
case MAGIC_KC(MAGIC_KEY_LAYER8):
switch_default_layer(8);
break;
case MAGIC_KC(MAGIC_KEY_LAYER9):
switch_default_layer(9);
break;
#endif
#if MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS
case KC_F1 ... KC_F9:
switch_default_layer((code - KC_F1) + 1);
break;
case KC_F10:
switch_default_layer(0);
break;
#endif
#if MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS
case KC_1 ... KC_9:
switch_default_layer((code - KC_1) + 1);
break;
case KC_0:
switch_default_layer(0);
break;
#endif
default:
print("?");
return false;
}
return true;
}
/***********************************************************
* Command console
***********************************************************/
static void command_console_help(void) {
print("\n\t- Console -\n"
"ESC/q: quit\n"
#ifdef MOUSEKEY_ENABLE
"m: mousekey\n"
#endif
);
}
static bool command_console(uint8_t code) {
switch (code) {
case KC_H:
case KC_SLASH: /* ? */
command_console_help();
print("C> ");
return true;
case KC_Q:
case KC_ESC:
command_state = ONESHOT;
return false;
#if defined(MOUSEKEY_ENABLE)
case KC_M:
command_state = MOUSEKEY;
mousekey_console(KC_SLASH /* ? */);
return true;
#endif
default:
print("?");
return false;
}
}
/***********************************************************
* Mousekey console
***********************************************************/
#if defined(MOUSEKEY_ENABLE)
# if !defined(NO_PRINT) && !defined(USER_PRINT)
static void mousekey_param_print(void) {
xprintf(/* clang-format off */
#ifndef MK_3_SPEED
"1: delay(*10ms): %u\n"
"2: interval(ms): %u\n"
"3: max_speed: %u\n"
"4: time_to_max: %u\n"
"5: wheel_max_speed: %u\n"
"6: wheel_time_to_max: %u\n"
, mk_delay
, mk_interval
, mk_max_speed
, mk_time_to_max
, mk_wheel_max_speed
, mk_wheel_time_to_max
#else
"no knobs sorry\n"
#endif
); /* clang-format on */
}
# endif /* !NO_PRINT && !USER_PRINT */
# if !defined(NO_PRINT) && !defined(USER_PRINT)
static void mousekey_console_help(void) {
mousekey_param_print();
xprintf(/* clang-format off */
"p: print values\n"
"d: set defaults\n"
"up: +1\n"
"dn: -1\n"
"lt: +10\n"
"rt: -10\n"
"ESC/q: quit\n"
#ifndef MK_3_SPEED
"\n"
"speed = delta * max_speed * (repeat / time_to_max)\n"
"where delta: cursor=%d, wheel=%d\n"
"See http://en.wikipedia.org/wiki/Mouse_keys\n"
, MOUSEKEY_MOVE_DELTA, MOUSEKEY_WHEEL_DELTA
#endif
); /* clang-format on */
}
# endif /* !NO_PRINT && !USER_PRINT */
/* Only used by `quantum/command.c` / `command_proc()`. To avoid
* any doubt: we return `false` to return to the main console,
* which differs from the `bool` that `command_proc()` returns. */
bool mousekey_console(uint8_t code) {
static uint8_t param = 0;
static uint8_t *pp = NULL;
static char * desc = NULL;
# if defined(NO_PRINT) || defined(USER_PRINT) /* -Wunused-parameter */
(void)desc;
# endif
int8_t change = 0;
switch (code) {
case KC_H:
case KC_SLASH: /* ? */
# if !defined(NO_PRINT) && !defined(USER_PRINT)
print("\n\t- Mousekey -\n");
mousekey_console_help();
# endif
break;
case KC_Q:
case KC_ESC:
print("q\n");
if (!param) return false;
param = 0;
pp = NULL;
desc = NULL;
break;
case KC_P:
# if !defined(NO_PRINT) && !defined(USER_PRINT)
print("\n\t- Values -\n");
mousekey_param_print();
# endif
break;
case KC_1 ... KC_0: /* KC_0 gives param = 10 */
param = 1 + code - KC_1;
switch (param) { /* clang-format off */
# define PARAM(n, v) case n: pp = &(v); desc = #v; break
#ifndef MK_3_SPEED
PARAM(1, mk_delay);
PARAM(2, mk_interval);
PARAM(3, mk_max_speed);
PARAM(4, mk_time_to_max);
PARAM(5, mk_wheel_max_speed);
PARAM(6, mk_wheel_time_to_max);
#endif /* MK_3_SPEED */
# undef PARAM
default:
param = 0;
print("?\n");
break;
} /* clang-format on */
if (param) xprintf("%u\n", param);
break;
/* clang-format off */
case KC_UP: change = +1; break;
case KC_DOWN: change = -1; break;
case KC_LEFT: change = -10; break;
case KC_RIGHT: change = +10; break;
/* clang-format on */
case KC_D:
# ifndef MK_3_SPEED
mk_delay = MOUSEKEY_DELAY / 10;
mk_interval = MOUSEKEY_INTERVAL;
mk_max_speed = MOUSEKEY_MAX_SPEED;
mk_time_to_max = MOUSEKEY_TIME_TO_MAX;
mk_wheel_max_speed = MOUSEKEY_WHEEL_MAX_SPEED;
mk_wheel_time_to_max = MOUSEKEY_WHEEL_TIME_TO_MAX;
# endif /* MK_3_SPEED */
print("defaults\n");
break;
default:
print("?\n");
break;
}
if (change) {
if (pp) {
int16_t val = *pp + change;
if (val > (int16_t)UINT8_MAX)
*pp = UINT8_MAX;
else if (val < 0)
*pp = 0;
else
*pp = (uint8_t)val;
xprintf("= %u\n", *pp);
} else {
print("?\n");
}
}
if (param) {
xprintf("M%u:%s> ", param, desc ? desc : "???");
} else {
print("M> ");
}
return true;
}
#endif /* MOUSEKEY_ENABLE */
/***********************************************************
* Utilities
***********************************************************/
static void switch_default_layer(uint8_t layer) {
xprintf("L%d\n", layer);
default_layer_set((layer_state_t)1 << layer);
clear_keyboard();
}
Reference in New Issue View Git Blame Copy Permalink