Dasky 49e339ba8d
Add LD7032 support to QP. (#20828)
Co-authored-by: Nick Brassel <nick@tzarc.org>
Co-authored-by: Sergey Vlasov <sigprof@gmail.com>
2024-09-18 21:44:33 +10:00

265 lines
10 KiB
Makefile

# Quantum Painter Configurables
QUANTUM_PAINTER_DRIVERS ?=
QUANTUM_PAINTER_ANIMATIONS_ENABLE ?= yes
QUANTUM_PAINTER_LVGL_INTEGRATION ?= no
# The list of permissible drivers that can be listed in QUANTUM_PAINTER_DRIVERS
VALID_QUANTUM_PAINTER_DRIVERS := \
surface \
ili9163_spi \
ili9341_spi \
ili9486_spi \
ili9488_spi \
st7735_spi \
st7789_spi \
gc9a01_spi \
gc9107_spi \
ssd1351_spi \
sh1106_i2c \
sh1106_spi \
ld7032_i2c \
ld7032_spi
#-------------------------------------------------------------------------------
OPT_DEFS += -DQUANTUM_PAINTER_ENABLE
COMMON_VPATH += $(QUANTUM_DIR)/painter \
$(QUANTUM_DIR)/unicode
SRC += \
$(QUANTUM_DIR)/unicode/utf8.c \
$(QUANTUM_DIR)/color.c \
$(QUANTUM_DIR)/painter/qp.c \
$(QUANTUM_DIR)/painter/qp_internal.c \
$(QUANTUM_DIR)/painter/qp_stream.c \
$(QUANTUM_DIR)/painter/qgf.c \
$(QUANTUM_DIR)/painter/qff.c \
$(QUANTUM_DIR)/painter/qp_draw_core.c \
$(QUANTUM_DIR)/painter/qp_draw_codec.c \
$(QUANTUM_DIR)/painter/qp_draw_circle.c \
$(QUANTUM_DIR)/painter/qp_draw_ellipse.c \
$(QUANTUM_DIR)/painter/qp_draw_image.c \
$(QUANTUM_DIR)/painter/qp_draw_text.c
# Check if people want animations... enable the defered exec if so.
ifeq ($(strip $(QUANTUM_PAINTER_ANIMATIONS_ENABLE)), yes)
DEFERRED_EXEC_ENABLE := yes
OPT_DEFS += -DQUANTUM_PAINTER_ANIMATIONS_ENABLE
endif
# Comms flags
QUANTUM_PAINTER_NEEDS_COMMS_DUMMY ?= no
QUANTUM_PAINTER_NEEDS_COMMS_SPI ?= no
QUANTUM_PAINTER_NEEDS_COMMS_I2C ?= no
# Handler for each driver
define handle_quantum_painter_driver
CURRENT_PAINTER_DRIVER := $1
ifeq ($$(filter $$(strip $$(CURRENT_PAINTER_DRIVER)),$$(VALID_QUANTUM_PAINTER_DRIVERS)),)
$$(error "$$(CURRENT_PAINTER_DRIVER)" is not a valid Quantum Painter driver)
else ifeq ($$(strip $$(CURRENT_PAINTER_DRIVER)),surface)
QUANTUM_PAINTER_NEEDS_SURFACE := yes
else ifeq ($$(strip $$(CURRENT_PAINTER_DRIVER)),ili9163_spi)
QUANTUM_PAINTER_NEEDS_COMMS_SPI := yes
QUANTUM_PAINTER_NEEDS_COMMS_SPI_DC_RESET := yes
OPT_DEFS += -DQUANTUM_PAINTER_ILI9163_ENABLE -DQUANTUM_PAINTER_ILI9163_SPI_ENABLE
COMMON_VPATH += \
$(DRIVER_PATH)/painter/tft_panel \
$(DRIVER_PATH)/painter/ili9xxx
SRC += \
$(DRIVER_PATH)/painter/tft_panel/qp_tft_panel.c \
$(DRIVER_PATH)/painter/ili9xxx/qp_ili9163.c \
else ifeq ($$(strip $$(CURRENT_PAINTER_DRIVER)),ili9341_spi)
QUANTUM_PAINTER_NEEDS_COMMS_SPI := yes
QUANTUM_PAINTER_NEEDS_COMMS_SPI_DC_RESET := yes
OPT_DEFS += -DQUANTUM_PAINTER_ILI9341_ENABLE -DQUANTUM_PAINTER_ILI9341_SPI_ENABLE
COMMON_VPATH += \
$(DRIVER_PATH)/painter/tft_panel \
$(DRIVER_PATH)/painter/ili9xxx
SRC += \
$(DRIVER_PATH)/painter/tft_panel/qp_tft_panel.c \
$(DRIVER_PATH)/painter/ili9xxx/qp_ili9341.c \
else ifeq ($$(strip $$(CURRENT_PAINTER_DRIVER)),ili9486_spi)
QUANTUM_PAINTER_NEEDS_COMMS_SPI := yes
QUANTUM_PAINTER_NEEDS_COMMS_SPI_DC_RESET := yes
OPT_DEFS += -DQUANTUM_PAINTER_ILI9486_ENABLE -DQUANTUM_PAINTER_ILI9486_SPI_ENABLE
COMMON_VPATH += \
$(DRIVER_PATH)/painter/tft_panel \
$(DRIVER_PATH)/painter/ili9xxx
SRC += \
$(DRIVER_PATH)/painter/tft_panel/qp_tft_panel.c \
$(DRIVER_PATH)/painter/ili9xxx/qp_ili9486.c \
else ifeq ($$(strip $$(CURRENT_PAINTER_DRIVER)),ili9488_spi)
QUANTUM_PAINTER_NEEDS_COMMS_SPI := yes
QUANTUM_PAINTER_NEEDS_COMMS_SPI_DC_RESET := yes
OPT_DEFS += -DQUANTUM_PAINTER_ILI9488_ENABLE -DQUANTUM_PAINTER_ILI9488_SPI_ENABLE
COMMON_VPATH += \
$(DRIVER_PATH)/painter/tft_panel \
$(DRIVER_PATH)/painter/ili9xxx
SRC += \
$(DRIVER_PATH)/painter/tft_panel/qp_tft_panel.c \
$(DRIVER_PATH)/painter/ili9xxx/qp_ili9488.c \
else ifeq ($$(strip $$(CURRENT_PAINTER_DRIVER)),st7735_spi)
QUANTUM_PAINTER_NEEDS_COMMS_SPI := yes
QUANTUM_PAINTER_NEEDS_COMMS_SPI_DC_RESET := yes
OPT_DEFS += -DQUANTUM_PAINTER_ST7735_ENABLE -DQUANTUM_PAINTER_ST7735_SPI_ENABLE
COMMON_VPATH += \
$(DRIVER_PATH)/painter/tft_panel \
$(DRIVER_PATH)/painter/st77xx
SRC += \
$(DRIVER_PATH)/painter/tft_panel/qp_tft_panel.c \
$(DRIVER_PATH)/painter/st77xx/qp_st7735.c
else ifeq ($$(strip $$(CURRENT_PAINTER_DRIVER)),st7789_spi)
QUANTUM_PAINTER_NEEDS_COMMS_SPI := yes
QUANTUM_PAINTER_NEEDS_COMMS_SPI_DC_RESET := yes
OPT_DEFS += -DQUANTUM_PAINTER_ST7789_ENABLE -DQUANTUM_PAINTER_ST7789_SPI_ENABLE
COMMON_VPATH += \
$(DRIVER_PATH)/painter/tft_panel \
$(DRIVER_PATH)/painter/st77xx
SRC += \
$(DRIVER_PATH)/painter/tft_panel/qp_tft_panel.c \
$(DRIVER_PATH)/painter/st77xx/qp_st7789.c
else ifeq ($$(strip $$(CURRENT_PAINTER_DRIVER)),gc9a01_spi)
QUANTUM_PAINTER_NEEDS_COMMS_SPI := yes
QUANTUM_PAINTER_NEEDS_COMMS_SPI_DC_RESET := yes
OPT_DEFS += -DQUANTUM_PAINTER_GC9A01_ENABLE -DQUANTUM_PAINTER_GC9A01_SPI_ENABLE
COMMON_VPATH += \
$(DRIVER_PATH)/painter/tft_panel \
$(DRIVER_PATH)/painter/gc9xxx
SRC += \
$(DRIVER_PATH)/painter/tft_panel/qp_tft_panel.c \
$(DRIVER_PATH)/painter/gc9xxx/qp_gc9a01.c
else ifeq ($$(strip $$(CURRENT_PAINTER_DRIVER)),gc9107_spi)
QUANTUM_PAINTER_NEEDS_COMMS_SPI := yes
QUANTUM_PAINTER_NEEDS_COMMS_SPI_DC_RESET := yes
OPT_DEFS += -DQUANTUM_PAINTER_GC9107_ENABLE -DQUANTUM_PAINTER_GC9107_SPI_ENABLE
COMMON_VPATH += \
$(DRIVER_PATH)/painter/tft_panel \
$(DRIVER_PATH)/painter/gc9xxx
SRC += \
$(DRIVER_PATH)/painter/tft_panel/qp_tft_panel.c \
$(DRIVER_PATH)/painter/gc9xxx/qp_gc9107.c
else ifeq ($$(strip $$(CURRENT_PAINTER_DRIVER)),ssd1351_spi)
QUANTUM_PAINTER_NEEDS_COMMS_SPI := yes
QUANTUM_PAINTER_NEEDS_COMMS_SPI_DC_RESET := yes
OPT_DEFS += -DQUANTUM_PAINTER_SSD1351_ENABLE -DQUANTUM_PAINTER_SSD1351_SPI_ENABLE
COMMON_VPATH += \
$(DRIVER_PATH)/painter/tft_panel \
$(DRIVER_PATH)/painter/ssd1351
SRC += \
$(DRIVER_PATH)/painter/tft_panel/qp_tft_panel.c \
$(DRIVER_PATH)/painter/ssd1351/qp_ssd1351.c
else ifeq ($$(strip $$(CURRENT_PAINTER_DRIVER)),sh1106_spi)
QUANTUM_PAINTER_NEEDS_SURFACE := yes
QUANTUM_PAINTER_NEEDS_COMMS_SPI := yes
QUANTUM_PAINTER_NEEDS_COMMS_SPI_DC_RESET := yes
OPT_DEFS += -DQUANTUM_PAINTER_SH1106_ENABLE -DQUANTUM_PAINTER_SH1106_SPI_ENABLE
COMMON_VPATH += \
$(DRIVER_PATH)/painter/oled_panel \
$(DRIVER_PATH)/painter/sh1106
SRC += \
$(DRIVER_PATH)/painter/oled_panel/qp_oled_panel.c \
$(DRIVER_PATH)/painter/sh1106/qp_sh1106.c
else ifeq ($$(strip $$(CURRENT_PAINTER_DRIVER)),sh1106_i2c)
QUANTUM_PAINTER_NEEDS_SURFACE := yes
QUANTUM_PAINTER_NEEDS_COMMS_I2C := yes
OPT_DEFS += -DQUANTUM_PAINTER_SH1106_ENABLE -DQUANTUM_PAINTER_SH1106_I2C_ENABLE
COMMON_VPATH += \
$(DRIVER_PATH)/painter/oled_panel \
$(DRIVER_PATH)/painter/sh1106
SRC += \
$(DRIVER_PATH)/painter/oled_panel/qp_oled_panel.c \
$(DRIVER_PATH)/painter/sh1106/qp_sh1106.c
else ifeq ($$(strip $$(CURRENT_PAINTER_DRIVER)),ld7032_spi)
QUANTUM_PAINTER_NEEDS_SURFACE := yes
QUANTUM_PAINTER_NEEDS_COMMS_SPI := yes
QUANTUM_PAINTER_NEEDS_COMMS_SPI_DC_RESET := yes
OPT_DEFS += -DQUANTUM_PAINTER_LD7032_ENABLE -DQUANTUM_PAINTER_LD7032_SPI_ENABLE
COMMON_VPATH += \
$(DRIVER_PATH)/painter/oled_panel \
$(DRIVER_PATH)/painter/ld7032
SRC += \
$(DRIVER_PATH)/painter/oled_panel/qp_oled_panel.c \
$(DRIVER_PATH)/painter/ld7032/qp_ld7032.c
else ifeq ($$(strip $$(CURRENT_PAINTER_DRIVER)),ld7032_i2c)
QUANTUM_PAINTER_NEEDS_SURFACE := yes
QUANTUM_PAINTER_NEEDS_COMMS_I2C := yes
OPT_DEFS += -DQUANTUM_PAINTER_LD7032_ENABLE -DQUANTUM_PAINTER_LD7032_I2C_ENABLE
COMMON_VPATH += \
$(DRIVER_PATH)/painter/oled_panel \
$(DRIVER_PATH)/painter/ld7032
SRC += \
$(DRIVER_PATH)/painter/oled_panel/qp_oled_panel.c \
$(DRIVER_PATH)/painter/ld7032/qp_ld7032.c
endif
endef
# Iterate through the listed drivers for the build, including what's necessary
$(foreach qp_driver,$(QUANTUM_PAINTER_DRIVERS),$(eval $(call handle_quantum_painter_driver,$(qp_driver))))
# If a surface is needed, set up the required files
ifeq ($(strip $(QUANTUM_PAINTER_NEEDS_SURFACE)), yes)
QUANTUM_PAINTER_NEEDS_COMMS_DUMMY := yes
OPT_DEFS += -DQUANTUM_PAINTER_SURFACE_ENABLE
COMMON_VPATH += \
$(DRIVER_PATH)/painter/generic
SRC += \
$(DRIVER_PATH)/painter/generic/qp_surface_common.c \
$(DRIVER_PATH)/painter/generic/qp_surface_mono1bpp.c \
$(DRIVER_PATH)/painter/generic/qp_surface_rgb565.c
endif
# If dummy comms is needed, set up the required files
ifeq ($(strip $(QUANTUM_PAINTER_NEEDS_COMMS_DUMMY)), yes)
OPT_DEFS += -DQUANTUM_PAINTER_DUMMY_COMMS_ENABLE
VPATH += $(DRIVER_PATH)/painter/comms
SRC += \
$(QUANTUM_DIR)/painter/qp_comms.c \
$(DRIVER_PATH)/painter/comms/qp_comms_dummy.c
endif
# If SPI comms is needed, set up the required files
ifeq ($(strip $(QUANTUM_PAINTER_NEEDS_COMMS_SPI)), yes)
OPT_DEFS += -DQUANTUM_PAINTER_SPI_ENABLE
SPI_DRIVER_REQUIRED = yes
VPATH += $(DRIVER_PATH)/painter/comms
SRC += \
$(QUANTUM_DIR)/painter/qp_comms.c \
$(DRIVER_PATH)/painter/comms/qp_comms_spi.c
ifeq ($(strip $(QUANTUM_PAINTER_NEEDS_COMMS_SPI_DC_RESET)), yes)
OPT_DEFS += -DQUANTUM_PAINTER_SPI_DC_RESET_ENABLE
endif
endif
# If I2C comms is needed, set up the required files
ifeq ($(strip $(QUANTUM_PAINTER_NEEDS_COMMS_I2C)), yes)
OPT_DEFS += -DQUANTUM_PAINTER_I2C_ENABLE
I2C_DRIVER_REQUIRED = yes
VPATH += $(DRIVER_PATH)/painter/comms
SRC += \
$(QUANTUM_DIR)/painter/qp_comms.c \
$(DRIVER_PATH)/painter/comms/qp_comms_i2c.c
endif
# Check if LVGL needs to be enabled
ifeq ($(strip $(QUANTUM_PAINTER_LVGL_INTEGRATION)), yes)
include $(QUANTUM_DIR)/painter/lvgl/rules.mk
endif