Since `freertos_config` is an interface library,
`INTERFACE` scope shall be used to define compile
definitions.
Signed-off-by: Ahmed Ismail <Ahmed.Ismail@arm.com>
We have removed the use of pthread_attr_setstack and as a result,
the task stack is no longer used as the corresponding pthread's stack.
There is no use of calling pthread_attr_setstacksize as the default is
always good enough and we don't need to handle OS specific cases.
This PR simplifies the code by removing the call to pthread_attr_setstacksize.
Signed-off-by: Paul Hollinsky <paulhollinsky@gmail.com>
* copyright-checker: Add FreeRTOS Arm collab copyright
FreeRTOS Arm collab files shall have both Amazon's
and Arm's copyright headers. Hence, the copyright
checker is modified to check for both copyrights.
Signed-off-by: Gaurav Aggarwal <aggarg@amazon.com>
* armv8-m: Add support for IAR with TFM FREERTOS PORT
As the case for ARMClang, and GCC toolchains, IAR
with TFM FreeRTOS Port support is added.
Signed-off-by: Ahmed Ismail <Ahmed.Ismail@arm.com>
* armv8-m: Do not overwrite Control register value
The current ARMv8-M FreeRTOS-Kernel Port code
implementation is modified in a way that allows
the CONTROL register's value to be retained
rather than being overwritten.
This is needed for adding PACBTI support as
the special-purpose CONTROL register `PAC_EN`,
`UPAC_EN`, `BTI_EN`, and `UBTI_EN` PACBTI
enablement bits should be configured before calling
`vRestoreContextOfFirstTask()` function which currently
overwrite the value inside the CONTROL register.
Signed-off-by: Ahmed Ismail <Ahmed.Ismail@arm.com>
* armv8.1-m: Add PACBTI support to kernel non-secure implementation
In this commit, Pointer Authentication, and Branch Target
Identification Extension (PACBTI) support is added for
Non-Secure and Non-TrustZone variants of Cortex-M85
FreeRTOS-Kernel Port.
The PACBTI support is added for Arm Compiler For
Embedded, and IAR toolchains only. The support in
the kernel is not yet enabled for GNU toolchain
due to known issues.
Signed-off-by: Ahmed Ismail <Ahmed.Ismail@arm.com>
* Fix CI check
Signed-off-by: Gaurav Aggarwal <aggarg@amazon.com>
---------
Signed-off-by: Gaurav Aggarwal <aggarg@amazon.com>
Signed-off-by: Ahmed Ismail <Ahmed.Ismail@arm.com>
Co-authored-by: Ahmed Ismail <ahmism01@e133373.arm.com>
Co-authored-by: Gaurav Aggarwal <aggarg@amazon.com>
In environments that do not support static allocation
(configSUPPORT_STATIC_ALLOCATION == 0), at prvCreateIdleTasks(), call
xCreateTask() and compare its return value to pdFAIL to check whether
xCreateTask() failed. However, xCreateTask() returns
errCOULD_NOT_ALLOCATE_REQUIRED_MEMORY as the error value, so the
result of this comparison is always false.
This commit fixes this problem by changing the return value comparison
to pdPASS instead of pdFAIL.
* Xtensa support moved to Partner-Supported ports
Removing legacy Xtensa port; leave README with pointer to latest code
* Updated submodule ThirdParty/FreeRTOS-Kernel-Partner-Supported-Ports
refactor: change methods ENTER|EXIT critical
The read and write of BaseType_t are atomic for a number of ports
and therefore, do not require taskENTER_CRITICAL/taskEXIT_CRITICAL.
This PR introduces portBASE_TYPE_ENTER_CRITICAL and
portBASE_TYPE_EXIT_CRITICAL which default to taskENTER_CRITICAL
and taskEXIT_CRITICAL. The APIs that read/write BaseType_t are updated
to use these new macros.
The next change would to be to define portBASE_TYPE_ENTER_CRITICAL and
portBASE_TYPE_EXIT_CRITICAL to nothing for ports where BaseType_t
read and write are atomic.
Signed-off-by: guilherme giacomo simoes <trintaeoitogc@gmail.com>
Add missing MPU prototypes
This commit address the following issues with MPU prototypes:
1. Fix the decorator according to which MPU wrapper is used.
2. Add the missing prototypes for v1.
3. Add the corresponding mapping to mpu_wrappers.h.
4. Update MPU v1 wrappers for vTaskList and vTaskGetRunTimeStats.
This was reported here - https://forums.freertos.org/t/cortex-m55-and-16-region-mpu-support/21470/5.
Signed-off-by: Gaurav Aggarwal <aggarg@amazon.com>
Support for 16 MPU regions was added to Cortex-M33, M35P, M55 and M85
ports was added but the compile time error check was not removed. This
results in compilation error when 16 MPU regions are used. This PR
removes the not needed compile time error check.
It was reported here - https://forums.freertos.org/t/cortex-m55-and-16-region-mpu-support/21470.
Signed-off-by: Gaurav Aggarwal <aggarg@amazon.com>
Add configVALIDATE_HEAP_BLOCK_POINTER on heap_5
heap_5 is used for multiple separated memory spaces. In the
previous implementation, it only verifies the highest and
lowest addresses. A pointer may not be within heap regions,
but is still located between the highest and lowest addressed.
Add maco configVALIDATE_HEAP_BLOCK_POINTER to provide
customized heap block pointers detection based on the settings
of heap regions.
Signed-off-by: wangfei_chen <wangfei_chen@realsil.com.cn>
Event Groups: snapshot xEventGroupSetBits returning value while in
vTaskSuspendAll. Fixes uxEventBits dereference after event group
deleted by higher priority thread.
When a task deletes itself, it calls portPRE_TASK_DELETE_HOOK which
translates to vPortCloseRunningThread on the Windows port.
vPortCloseRunningThread never returns and as a result,
taskYIELD_WITHIN_API in vTaskDelete does not get called. As a result,
the next task is not scheduled when configUSE_PREEMPTION is set to 0.
This change records that a yield is pending so that the next tick
interrupt switches out the task that was deleted.
Signed-off-by: Gaurav Aggarwal <aggarg@amazon.com>
When validate those allocated heap block structure, the canary is not used.
Do xor with canary when allocating a new block.
Signed-off-by: wangfei_chen <wangfei_chen@realsil.com.cn>
Co-authored-by: wangfei_chen <wangfei_chen@realsil.com.cn>
* Remove hardware dependence in portmacros.h
The IAR MSP430X port `#include "msp430.h"` which pulls all the hardware
register definitions into anything which `#include "FreeRTOS.h"`. This
removes that hardware dependency "leak" by removing the header file
and re-defining the `portDISABLE_INTERRUPTS()` and
`portENABLE_INTERRUPTS()` macros in terms of `__asm`.
* Code review suggestions
Signed-off-by: Gaurav Aggarwal <aggarg@amazon.com>
---------
Signed-off-by: Gaurav Aggarwal <aggarg@amazon.com>
Co-authored-by: Gaurav-Aggarwal-AWS <33462878+aggarg@users.noreply.github.com>
Co-authored-by: Gaurav Aggarwal <aggarg@amazon.com>
* Fix compilation issue of IAR32 port
* Add new line at EOF
* Fix header check
---------
Co-authored-by: Gaurav-Aggarwal-AWS <33462878+aggarg@users.noreply.github.com>
The original implementation only initializes the first
variable. After executing xTaskIncrementTick, the schedule
might not behave as expected.
When configUSE_PREEMPTION == 1 & configUSE_TIME_SLICING == 1,
replace setting xYieldRequiredForCore[ xCoreID ] with setting
xYieldPendings[ xCoreID ].
And when configUSE_PREEMPTION == 1, simplify the check
condition to only check xYieldPendings[ xCoreID ].
Signed-off-by: cymzier <cymb103u@cs.ccu.edu.tw>
Co-authored-by: Gaurav-Aggarwal-AWS <33462878+aggarg@users.noreply.github.com>
This PR adds support for vApplicationFPUSafeIRQHandler. The application
writer needs to name their IRQ handler as:
1. vApplicationIRQHandler if the IRQ handler does not use FPU registers.
2. vApplicationFPUSafeIRQHandler is the IRQ handler uses FPU registers.
When the application uses vApplicationFPUSafeIRQHandler, a default
implementation of vApplicationIRQHandler is used which stores FPU
registers and then calls vApplicationFPUSafeIRQHandler.
* Reset xNextTaskUnblockTime in task notify FromISR APIs
If a task is blocked waiting for a notification then
xNextTaskUnblockTime might be set to the blocked task's timeout time. If
the task is unblocked for a reason other than a timeout
xNextTaskUnblockTime is normally left unchanged, because it will
automatically get reset to a new value when the tick count equals
xNextTaskUnblockTime. However if tickless idle is used it is important
to enter sleep mode at the earliest possible time - so reset
xNextTaskUnblockTime here to ensure it is updated at the earliest
possible time.
This was reported here -
https://forums.freertos.org/t/the-vtaskgenericnotifygivefromisr-function-need-call-prvresetnexttaskunblocktime/21090
Signed-off-by: Gaurav Aggarwal <aggarg@amazon.com>
This PR makes the following improvements to the ARM_CRx_No_GIC port-
1. Remove inline assembly and move all the assembly code to the portASM.S
file.
2. Add support for configUSE_TASK_FPU_SUPPORT -
- When configUSE_TASK_FPU_SUPPORT is defined to 1, tasks are created
without floating point context. Tasks that want to use floating point, need
to call portTASK_USES_FLOATING_POINT(). This is the current behavior.
- When configUSE_TASK_FPU_SUPPORT is defined to 2, each task is created
with a floating point context.
If left undefined, configUSE_TASK_FPU_SUPPORT defaults to 1 for backward compatibility.
3. The application writer can now implement vApplicationSVCHandler to handle the
SVC calls raised within the application. SVC 0 is used for the yield kernel operation
and the application can use all the SVC calls other than 0.
Signed-off-by: kar-rahul-aws <karahulx@amazon.com>
* Fix kexcept function
* Create dummy pxCurrentTCBs for xcore.ai port
* Additional commentary
* Add a layer of indirection to cope with singlecore
* Clarify use of _DoException
FreeRTOS MPU: Add privileged execute never MPU attribute
A new MPU region attribute Privileged eXecute Never (PXN)
is introduced in Armv8.1-M architecture, where if an MPU
region has PXN attribute set and the processor attempts
to execute the code inside with privileged level,
the Memory Management Fault exception would be triggered,
with IACCVIOL bit in MemManage Fault State Register set
to 1. The PXN feature allows privileged software to ensure
specific application tasks (threads) to execute in
unprivileged level only.
Signed-off-by: Ahmed Ismail <Ahmed.Ismail@arm.com>
In `prvCheckForRunStateChange()`, enabling interrupts should cause this core to immediately service the pending interrupt and yield. Upon the next scheduling of the task, the assertion `configASSERT(pxThisTCB->xTaskRunState != taskTASK_SCHEDULED_TO_YIELD);` may not be true, as other cores could have requested a yield for this task before it evaluates its run state within the assertion. To address this, the task re-evaluates its run state in critical section within a loop until it is eligible for execution, which is the current implementation. Consequently, this assertion should be removed to ensure correct behavior.
* Fix traceMALLOC() memory count is inaccurate. (#1078)
Modify xWantedSize to the size of a free block when not split blocks.
Ensure that the sizes within traceMALLOC() and traceFREE() macros are equal.
* Create a new variable xAllocatedBlockSize for traceMALLOC()
---------
Co-authored-by: Gaurav-Aggarwal-AWS <33462878+aggarg@users.noreply.github.com>
