sandey/blender
1
0
Fork 0
forked from bartvdbraak/blender
Code Pull Requests Activity
3e073f42a5
blender/CMakeLists.txt

1849 lines
61 KiB
CMake
Raw Normal View History

Patch from GSR that a) fixes a whole bunch of GPL/BL license blocks that were previously missed; and b) greatly increase my ohloh stats!
2008-04-16 22:40:48 +00:00
# ***** BEGIN GPL LICENSE BLOCK *****
CMake lists initial submission. Documentationand further verification for different platforms will follow soon. This was just tested against current CVS on MSVC 2005 with Verse, QuickTime, OpenEXR, Player all on.
2006-11-17 02:27:12 +00:00
#
# This program is free software; you can redistribute it and/or
# modify it under the terms of the GNU General Public License
# as published by the Free Software Foundation; either version 2
Patch from GSR that a) fixes a whole bunch of GPL/BL license blocks that were previously missed; and b) greatly increase my ohloh stats!
2008-04-16 22:40:48 +00:00
# of the License, or (at your option) any later version.
CMake lists initial submission. Documentationand further verification for different platforms will follow soon. This was just tested against current CVS on MSVC 2005 with Verse, QuickTime, OpenEXR, Player all on.
2006-11-17 02:27:12 +00:00
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software Foundation,
correct fsf address
2010-02-12 13:34:04 +00:00
# Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
CMake lists initial submission. Documentationand further verification for different platforms will follow soon. This was just tested against current CVS on MSVC 2005 with Verse, QuickTime, OpenEXR, Player all on.
2006-11-17 02:27:12 +00:00
#
# The Original Code is Copyright (C) 2006, Blender Foundation
# All rights reserved.
#
# The Original Code is: all of this file.
#
# Contributor(s): Jacques Beaurain.
#
Patch from GSR that a) fixes a whole bunch of GPL/BL license blocks that were previously missed; and b) greatly increase my ohloh stats!
2008-04-16 22:40:48 +00:00
# ***** END GPL LICENSE BLOCK *****
CMake lists initial submission. Documentationand further verification for different platforms will follow soon. This was just tested against current CVS on MSVC 2005 with Verse, QuickTime, OpenEXR, Player all on.
2006-11-17 02:27:12 +00:00
CMake: Give error on attempts to generate within the sources with instructions on how to do it out-of-source
2006-12-13 02:57:57 +00:00
#-----------------------------------------------------------------------------
formatting edits only
2011-09-30 15:51:58 +00:00
# We don't allow in-source builds. This causes no end of troubles because
# all out-of-source builds will use the CMakeCache.txt file there and even
set main() argv functions to be const char * also set minimum cmake version to 2.8
2011-02-19 12:05:20 +00:00
# build the libs and objects in it.
CMake: Give error on attempts to generate within the sources with instructions on how to do it out-of-source
2006-12-13 02:57:57 +00:00
use lowercase for cmake builtin names and macros, remove contents in else() and endif() which is no longer needed.
2010-12-08 08:43:06 +00:00
if(${CMAKE_SOURCE_DIR} STREQUAL ${CMAKE_BINARY_DIR})
minor changes - remove some warnings - fix typos - cmake allow in-source build (when WITH_IN_SOURCE_BUILD is defined) - cmake, use an explicit list of rna files (don't glob)
2011-04-21 05:49:47 +00:00
if(NOT DEFINED WITH_IN_SOURCE_BUILD)
message(FATAL_ERROR
"CMake generation for blender is not allowed within the source directory!"
"\n Remove the CMakeCache.txt file and try again from another folder, e.g.:"
"\n "
"\n rm CMakeCache.txt"
"\n cd .."
"\n mkdir cmake-make"
"\n cd cmake-make"
"\n cmake ../blender"
"\n "
"\n Alternately define WITH_IN_SOURCE_BUILD to force this option (not recommended!)"
)
endif()
use lowercase for cmake builtin names and macros, remove contents in else() and endif() which is no longer needed.
2010-12-08 08:43:06 +00:00
endif()
CMake: Give error on attempts to generate within the sources with instructions on how to do it out-of-source
2006-12-13 02:57:57 +00:00
set main() argv functions to be const char * also set minimum cmake version to 2.8
2011-02-19 12:05:20 +00:00
cmake_minimum_required(VERSION 2.8)
minor changes to cmake, main noticable change is to disable RULE_MESSAGES which gives less output with makefiles (easier to spot warnings).
2010-06-07 14:28:37 +00:00
since cmake new auto-detects many features, print a summery of the configuration on first run.
2011-06-19 13:49:20 +00:00
if(NOT EXECUTABLE_OUTPUT_PATH)
set(FIRST_RUN "TRUE")
endif()
add option WITH_BUILTIN_GLEW, so linux packagers can disable to use their own glew library.
2011-04-05 23:31:01 +00:00
# this starts out unset
fix [#27681] Python: crash assigning a 'set' to an array
2011-06-17 02:22:38 +00:00
list(APPEND CMAKE_MODULE_PATH "${CMAKE_SOURCE_DIR}/build_files/cmake/Modules")
add option WITH_BUILTIN_GLEW, so linux packagers can disable to use their own glew library.
2011-04-05 23:31:01 +00:00
initialize cmake's CMAKE_BUILD_TYPE to 'Release' add reference to cmake cache for convenience GNUMakefile
2011-06-27 13:18:08 +00:00
# avoid having empty buildtype
set(CMAKE_BUILD_TYPE_INIT "Release")
minor changes to cmake, main noticable change is to disable RULE_MESSAGES which gives less output with makefiles (easier to spot warnings).
2010-06-07 14:28:37 +00:00
# quiet output for Makefiles, 'make -s' helps too
use lowercase for cmake builtin names and macros, remove contents in else() and endif() which is no longer needed.
2010-12-08 08:43:06 +00:00
# set_property(GLOBAL PROPERTY RULE_MESSAGES OFF)
minor changes to cmake, main noticable change is to disable RULE_MESSAGES which gives less output with makefiles (easier to spot warnings).
2010-06-07 14:28:37 +00:00
cmake - set configuration specific defines globally rather than mixing in with c/cxx flags
2011-10-26 00:51:29 +00:00
# global compile definitions since add_definitions() adds for all.
set_property(DIRECTORY APPEND PROPERTY COMPILE_DEFINITIONS_DEBUG DEBUG _DEBUG)
set_property(DIRECTORY APPEND PROPERTY COMPILE_DEFINITIONS_RELEASE NDEBUG)
set_property(DIRECTORY APPEND PROPERTY COMPILE_DEFINITIONS_MINSIZEREL NDEBUG)
Fix RelWithDebInfo build. RelWithDebInfo sets the library path to only include release libraries (e.g. python32.lib) but defining _DEBUG when #include'ing python headers inserts a linker directive to require for python32_d.lib. Additionally, RelWithDebInfo should be different from release build in that it builds debugger symbols (.PDBs), it should not have asserts and other debug code.
2011-10-29 16:14:38 +00:00
set_property(DIRECTORY APPEND PROPERTY COMPILE_DEFINITIONS_RELWITHDEBINFO NDEBUG)
cmake - set configuration specific defines globally rather than mixing in with c/cxx flags
2011-10-26 00:51:29 +00:00
buildinfo is now quoted from the build systems, avoids stripping quotes on startup. tested with linux/cmake linux/scons windows/cmake/mingw windows/cmake/msvc
2011-08-22 12:24:14 +00:00
#-----------------------------------------------------------------------------
# Set policy
# see "cmake --help-policy CMP0003"
# So library linking is more sane
cmake_policy(SET CMP0003 NEW)
# So BUILDINFO and BLENDERPATH strings are automatically quoted
cmake_policy(SET CMP0005 NEW)
# So syntax problems are errors
cmake_policy(SET CMP0010 NEW)
# Input directories must have CMakeLists.txt
cmake_policy(SET CMP0014 NEW)
CMake changes - don't allow building if the LIBDIR is not found on mac/windows. - by default use -O2 rather then -O3 for GCC release flags, was crashing some GCC versions and blender releases are supposed to use -O2.
2011-05-23 14:56:14 +00:00
#-----------------------------------------------------------------------------
# Load some macros.
include(build_files/cmake/macros.cmake)
change in how cmake works with CMAKE_C_STANDARD_LIBRARIES / CMAKE_CXX_STANDARD_LIBRARIES. if not defined (first run) these are now set blank but can be defined later. the problem is that scons & cmake builds would link against different libraries since cmake added its own defaults. now, by default, scons & cmake have the same libraries. This fixes an obscure crash in MinGW where cmakes default linking with -ladvapi32 would crash on string formatting which used float precision as an argument, eg: printf("%.*f", 3, value); ...without giving a useful backtrace or pointing to the line of code doing the string formatting.
2011-04-09 11:16:37 +00:00
CMake changes - don't allow building if the LIBDIR is not found on mac/windows. - by default use -O2 rather then -O3 for GCC release flags, was crashing some GCC versions and blender releases are supposed to use -O2.
2011-05-23 14:56:14 +00:00
#-----------------------------------------------------------------------------
# Initialize project.
CMake lists initial submission. Documentationand further verification for different platforms will follow soon. This was just tested against current CVS on MSVC 2005 with Verse, QuickTime, OpenEXR, Player all on.
2006-11-17 02:27:12 +00:00
CMake changes - don't allow building if the LIBDIR is not found on mac/windows. - by default use -O2 rather then -O3 for GCC release flags, was crashing some GCC versions and blender releases are supposed to use -O2.
2011-05-23 14:56:14 +00:00
blender_project_hack_pre()
change in how cmake works with CMAKE_C_STANDARD_LIBRARIES / CMAKE_CXX_STANDARD_LIBRARIES. if not defined (first run) these are now set blank but can be defined later. the problem is that scons & cmake builds would link against different libraries since cmake added its own defaults. now, by default, scons & cmake have the same libraries. This fixes an obscure crash in MinGW where cmakes default linking with -ladvapi32 would crash on string formatting which used float precision as an argument, eg: printf("%.*f", 3, value); ...without giving a useful backtrace or pointing to the line of code doing the string formatting.
2011-04-09 11:16:37 +00:00
CMake changes - don't allow building if the LIBDIR is not found on mac/windows. - by default use -O2 rather then -O3 for GCC release flags, was crashing some GCC versions and blender releases are supposed to use -O2.
2011-05-23 14:56:14 +00:00
project(Blender)
change in how cmake works with CMAKE_C_STANDARD_LIBRARIES / CMAKE_CXX_STANDARD_LIBRARIES. if not defined (first run) these are now set blank but can be defined later. the problem is that scons & cmake builds would link against different libraries since cmake added its own defaults. now, by default, scons & cmake have the same libraries. This fixes an obscure crash in MinGW where cmakes default linking with -ladvapi32 would crash on string formatting which used float precision as an argument, eg: printf("%.*f", 3, value); ...without giving a useful backtrace or pointing to the line of code doing the string formatting.
2011-04-09 11:16:37 +00:00
CMake changes - don't allow building if the LIBDIR is not found on mac/windows. - by default use -O2 rather then -O3 for GCC release flags, was crashing some GCC versions and blender releases are supposed to use -O2.
2011-05-23 14:56:14 +00:00
blender_project_hack_post()
change in how cmake works with CMAKE_C_STANDARD_LIBRARIES / CMAKE_CXX_STANDARD_LIBRARIES. if not defined (first run) these are now set blank but can be defined later. the problem is that scons & cmake builds would link against different libraries since cmake added its own defaults. now, by default, scons & cmake have the same libraries. This fixes an obscure crash in MinGW where cmakes default linking with -ladvapi32 would crash on string formatting which used float precision as an argument, eg: printf("%.*f", 3, value); ...without giving a useful backtrace or pointing to the line of code doing the string formatting.
2011-04-09 11:16:37 +00:00
import/export automated testing using CMake's CTest Will need to write full docs on this on the wiki. basic info. - 21 tests, OBJ/3DS/X3D/FBX, 3 tests per format import export. STL, PLY, BVH are TODO. - uses files in ../lib/tests (checkout separate) - run with CMake Makefiles "make test" or "ctest" - currently checks against basic MD5 hash on scene import and file MD5 hash on export (realize this wont work predictably on binary formats *TODO*). - currently uses a generic script for all tests with arguments to specify command to run, expected output, testing method, files to check against etc. Has already proved useful, found a number of bugs in import export and some in blender too.
2011-01-21 00:06:30 +00:00
enable_testing()
CMake lists initial submission. Documentationand further verification for different platforms will follow soon. This was just tested against current CVS on MSVC 2005 with Verse, QuickTime, OpenEXR, Player all on.
2006-11-17 02:27:12 +00:00
#-----------------------------------------------------------------------------
# Redirect output files
style cleanup: whitespace/indentation
2012-05-19 13:55:54 +00:00
set(EXECUTABLE_OUTPUT_PATH ${CMAKE_BINARY_DIR}/bin CACHE INTERNAL "" FORCE)
set(LIBRARY_OUTPUT_PATH ${CMAKE_BINARY_DIR}/lib CACHE INTERNAL "" FORCE)
CMake lists initial submission. Documentationand further verification for different platforms will follow soon. This was just tested against current CVS on MSVC 2005 with Verse, QuickTime, OpenEXR, Player all on.
2006-11-17 02:27:12 +00:00
#-----------------------------------------------------------------------------
# Set default config options
CMake: - WITH_LCMS added option, was supported in scons. - commented web plugin option since its not maintained. - some formatting changes and removed includes that are not needed for source/creator/CMakeLists.txt.
2010-06-06 13:32:58 +00:00
use lowercase for cmake builtin names and macros, remove contents in else() and endif() which is no longer needed.
2010-12-08 08:43:06 +00:00
get_blender_version()
CMake patch from Ralf Hölzemer (cheleb) [#22849] Fix cmake install target on linux --- from the tracker --- This patch fixes the install target for the linux platform. Since the new configuration path changes are in effect, files have to be installed in the correct places instead of just copying the local installation to $PREFIX/share/blender. It also provides a new macro to determine the correct blender version values. Changes in this patch include: - the .desktop menu file is installed in $PREFIX/share/applications and points to the svg icon instead of a png one, which is also installed in $PREFIX/share/pixmaps - docs are installed in $PREFIX/share/doc/blender - scripts are installed in in $PREFIX/share/blender/x.xx/ - locales are installed in in $PREFIX/share/blender/x.xx/datafiles - a new cmake macro determines and sets the correct values for BLENDER_VERSION_MAJOR, BLENDER_VERSION_MINOR, BLENDER_SUBVERSION, BLENDER_VERSION, BLENDER_MINVERSION_MAJOR, BLENDER_MINVERSION_MINOR, BLENDER_MINSUBVERSION and BLENDER_MINVERSION by parsing source/blender/blenkernel/BKE_blender.h and calculating major/minor values. This replaces the hardcoded value in the top CMakeLists file and is used by all platforms.
2010-07-14 20:26:46 +00:00
cleanup endian handling - define __BIG_ENDIAN__ or __LITTLE_ENDIAN__ with cmake & scons. - ENDIAN_ORDER is now a define rather than a global short. - replace checks like this with single ifdef: #if defined(__sgi) || defined (__sparc) || defined (__sparc__) || defined (__PPC__) || defined (__ppc__) || defined (__hppa__) || defined (__BIG_ENDIAN__) - remove BKE_endian.h which isn't used
2011-09-19 08:02:17 +00:00
CMake: - WITH_LCMS added option, was supported in scons. - commented web plugin option since its not maintained. - some formatting changes and removed includes that are not needed for source/creator/CMakeLists.txt.
2010-06-06 13:32:58 +00:00
# Blender internal features
Advanced CMake option to build the player without blender: WITH_BLENDER
2011-07-13 08:15:06 +00:00
option(WITH_BLENDER "Build blender (disable to build only the blender player)" ON)
mark_as_advanced(WITH_BLENDER)
when checking for windows check sys.platform starts with "win" rather then '== "win32"' & avoid importing platform. also add some notes to CMake options.
2011-03-11 01:24:16 +00:00
option(WITH_INTERNATIONAL "Enable I18N (International fonts and text)" ON)
CMake build option for security report: CVE-2009-3850 Nothing is changed by default but some linux distributions want to have executing python be opt-in. This keeps the same functionality but disables auto-run from factory settings and in background mode unless its enabled as a command line argument. This CMake option is marked as advanced and wont show in the regular options list so its less likely to be enabled by people that like to turn everything ON without reading descriptions :)
2011-04-28 06:20:47 +00:00
when checking for windows check sys.platform starts with "win" rather then '== "win32"' & avoid importing platform. also add some notes to CMake options.
2011-03-11 01:24:16 +00:00
option(WITH_PYTHON "Enable Embedded Python API (only disable for development)" ON)
CMake build option for security report: CVE-2009-3850 Nothing is changed by default but some linux distributions want to have executing python be opt-in. This keeps the same functionality but disables auto-run from factory settings and in background mode unless its enabled as a command line argument. This CMake option is marked as advanced and wont show in the regular options list so its less likely to be enabled by people that like to turn everything ON without reading descriptions :)
2011-04-28 06:20:47 +00:00
option(WITH_PYTHON_SECURITY "Disables execution of scripts within blend files by default (recommend to leave off)" OFF)
missed setting WITH_BUILTIN_GLEW on non *nux OS's also made WITH_PYTHON advanced.
2011-04-06 01:51:43 +00:00
mark_as_advanced(WITH_PYTHON) # dont want people disabling this unless they really know what they are doing.
fixed "rather then" -> "rather than" typos all over the place
2011-05-28 13:11:24 +00:00
mark_as_advanced(WITH_PYTHON_SECURITY) # some distrobutions see this as a security issue, rather than have them patch it, make a build option.
CMake build option for security report: CVE-2009-3850 Nothing is changed by default but some linux distributions want to have executing python be opt-in. This keeps the same functionality but disables auto-run from factory settings and in background mode unless its enabled as a command line argument. This CMake option is marked as advanced and wont show in the regular options list so its less likely to be enabled by people that like to turn everything ON without reading descriptions :)
2011-04-28 06:20:47 +00:00
when checking for windows check sys.platform starts with "win" rather then '== "win32"' & avoid importing platform. also add some notes to CMake options.
2011-03-11 01:24:16 +00:00
option(WITH_PYTHON_SAFETY "Enable internal API error checking to track invalid data to prevent crash on access (at the expense of some effeciency, only enable for development)." OFF)
code cleanup: cmake buildsystem edits, unused var warnings and better description for WITH_PYTHON_MODULE. also disable workaround for some linux installs.
2012-06-28 08:51:02 +00:00
option(WITH_PYTHON_MODULE "Enable building as a python module which runs without a user interface, like running regular blender in background mode (experimental, only enable for development)" OFF)
when checking for windows check sys.platform starts with "win" rather then '== "win32"' & avoid importing platform. also add some notes to CMake options.
2011-03-11 01:24:16 +00:00
option(WITH_BUILDINFO "Include extra build details (only disable for development & faster builds)" ON)
option(WITH_IK_ITASC "Enable ITASC IK solver (only disable for development & for incompatible C++ compilers)" ON)
use lowercase for cmake builtin names and macros, remove contents in else() and endif() which is no longer needed.
2010-12-08 08:43:06 +00:00
option(WITH_FFTW3 "Enable FFTW3 support (Used for smoke and audio effects)" OFF)
option(WITH_BULLET "Enable Bullet (Physics Engine)" ON)
option(WITH_GAMEENGINE "Enable Game Engine" ON)
option(WITH_PLAYER "Build Player" OFF)
the compositor optional for cmake: WITH_COMPOSITOR
2012-06-30 14:14:22 +00:00
option(WITH_COMPOSITOR "Enable the tile based nodal compositor" ON)
CMake option 'WITH_HEADLESS' to build blender in headless mode (no x11/xlib) with NULL ghost classe.
2011-06-04 14:12:55 +00:00
- don't build ghost's event printer unless ghost debug is enabled. - use char rather then STR_String for the event printer. - added option to build WITH_GHOST_DEBUG for cmake - renamed WITH_SDL_GHOST --> WITH_GHOST_SDL
2011-07-13 06:04:54 +00:00
# GHOST Windowing Library Options
option(WITH_GHOST_DEBUG "Enable debugging output for the GHOST library" OFF)
mark_as_advanced(WITH_GHOST_DEBUG)
cmake option to build without an audio library.
2011-06-23 09:27:56 +00:00
- don't build ghost's event printer unless ghost debug is enabled. - use char rather then STR_String for the event printer. - added option to build WITH_GHOST_DEBUG for cmake - renamed WITH_SDL_GHOST --> WITH_GHOST_SDL
2011-07-13 06:04:54 +00:00
option(WITH_GHOST_SDL "Enable building blender against SDL for windowing rather then the native APIs" OFF)
mark_as_advanced(WITH_GHOST_SDL)
build option to use SDL 1.3 for GHOST rather then X11/Win32/Cocoa api's, This opens up the option for blender to be more easily ported to other devices, OS's. TODO - continuous grab. - text glitch with multiple windows (was a bug in X11 too for a while, will check on this)
2011-07-12 13:17:54 +00:00
- don't build ghost's event printer unless ghost debug is enabled. - use char rather then STR_String for the event printer. - added option to build WITH_GHOST_DEBUG for cmake - renamed WITH_SDL_GHOST --> WITH_GHOST_SDL
2011-07-13 06:04:54 +00:00
# Misc...
CMake option 'WITH_HEADLESS' to build blender in headless mode (no x11/xlib) with NULL ghost classe.
2011-06-04 14:12:55 +00:00
option(WITH_HEADLESS "Build without graphical support (renderfarm, server mode only)" OFF)
mark_as_advanced(WITH_HEADLESS)
Typo fixes for the typo fixes. :D
2011-10-23 15:43:12 +00:00
option(WITH_AUDASPACE "Build with blenders audio library (only disable if you know what you're doing!)" ON)
- don't build ghost's event printer unless ghost debug is enabled. - use char rather then STR_String for the event printer. - added option to build WITH_GHOST_DEBUG for cmake - renamed WITH_SDL_GHOST --> WITH_GHOST_SDL
2011-07-13 06:04:54 +00:00
mark_as_advanced(WITH_AUDASPACE)
CMake: - WITH_LCMS added option, was supported in scons. - commented web plugin option since its not maintained. - some formatting changes and removed includes that are not needed for source/creator/CMakeLists.txt.
2010-06-06 13:32:58 +00:00
# (unix defaults to OpenMP On)
Update build systems to copy needed dlls from MinGW-w64, turn openmp on by default for MinGW.
2012-07-05 11:39:11 +00:00
if((UNIX AND NOT APPLE) OR (MINGW))
Took out OpenMP refactor out by mistake
2012-04-12 08:45:26 +00:00
set(PLATFORM_DEFAULT ON)
use lowercase for cmake builtin names and macros, remove contents in else() and endif() which is no longer needed.
2010-12-08 08:43:06 +00:00
else()
Took out OpenMP refactor out by mistake
2012-04-12 08:45:26 +00:00
set(PLATFORM_DEFAULT OFF)
use lowercase for cmake builtin names and macros, remove contents in else() and endif() which is no longer needed.
2010-12-08 08:43:06 +00:00
endif()
fix incorrect use of PLATFORM_DEFAULT with cmake
2012-04-15 09:51:30 +00:00
option(WITH_OPENMP "Enable OpenMP (has to be supported by the compiler)" ${PLATFORM_DEFAULT})
Took out OpenMP refactor out by mistake
2012-04-12 08:45:26 +00:00
unset(PLATFORM_DEFAULT)
CMake: - WITH_LCMS added option, was supported in scons. - commented web plugin option since its not maintained. - some formatting changes and removed includes that are not needed for source/creator/CMakeLists.txt.
2010-06-06 13:32:58 +00:00
add cmake option to build without xinput (tablet support)
2011-03-25 04:56:48 +00:00
if(UNIX AND NOT APPLE)
remove $Id: tags after discussion on the mailign list: http://markmail.org/message/fp7ozcywxum3ar7n
2011-10-23 17:52:20 +00:00
option(WITH_X11_XINPUT "Enable X11 Xinput (tablet support and unicode input)" ON)
Added mode-getting functions for GHOST under X11 (GNU/Linux). Enabled xvidmode by default in cmake. Patch approved by Campbell.
2012-01-11 12:28:31 +00:00
option(WITH_X11_XF86VMODE "Enable X11 video mode switching" ON)
add cmake option WITH_SYSTEM_OPENJPEG so linux can build cycles without having libopenjpeg installed.
2012-06-23 14:23:44 +00:00
option(WITH_SYSTEM_GLEW "Use GLEW OpenGL wrapper library provided by the operating system" ON)
XDND support now can be disabled using WITH_GHOST_XDND=OFF with CMake and WITH_GHOST_XDND=False with SCons Disabled on FreeBSD platforms due to some linking errors.
2012-02-17 20:51:39 +00:00
# freebsd doesn't seems to support XDND
if(NOT ${CMAKE_SYSTEM_NAME} MATCHES "FreeBSD")
option(WITH_GHOST_XDND "Enable drag'n'drop support on Linux using XDND protocol" ON)
endif()
missed setting WITH_BUILTIN_GLEW on non *nux OS's also made WITH_PYTHON advanced.
2011-04-06 01:51:43 +00:00
else()
# not an option for other OS's
rename WITH_BUILTIN_GLEW, WITH_SYSTEM_GLEW & negate.
2012-06-23 13:42:14 +00:00
set(WITH_SYSTEM_GLEW OFF)
add cmake option to build without xinput (tablet support)
2011-03-25 04:56:48 +00:00
endif()
add cmake option WITH_SYSTEM_OPENJPEG so linux can build cycles without having libopenjpeg installed.
2012-06-23 14:23:44 +00:00
# (unix defaults to System OpenJPEG On)
if(UNIX AND NOT APPLE)
set(PLATFORM_DEFAULT ON)
else()
set(PLATFORM_DEFAULT OFF)
endif()
option(WITH_SYSTEM_OPENJPEG "Use the operating systems OpenJPEG library" ${PLATFORM_DEFAULT})
unset(PLATFORM_DEFAULT)
CMake options to disable Decimate and Boolean Modifiers: WITH_MOD_BOOLEAN, WITH_MOD_DECIMATE, renamed WITH_FLUID to WITH_MOD_FLUID
2010-10-23 15:40:13 +00:00
# Modifiers
Revert changes that disable features on MinGW. To compile on MinGW it is important to have the latest MinGW (gcc 4.6.2) I have updated the instructions on the wiki to reflect this: http://wiki.blender.org/index.php/Dev:2.5/Doc/Building_Blender/Windows/Environment
2012-04-12 08:36:07 +00:00
option(WITH_MOD_FLUID "Enable Elbeem Modifier (Fluid Simulation)" ON)
option(WITH_MOD_SMOKE "Enable Smoke Modifier (Smoke Simulation)" ON)
option(WITH_MOD_DECIMATE "Enable Decimate Modifier" ON)
option(WITH_MOD_BOOLEAN "Enable Boolean Modifier" ON)
option(WITH_MOD_REMESH "Enable Remesh Modifier" ON)
option(WITH_MOD_CLOTH_ELTOPO "Enable Experimental cloth solver" OFF)
eltopo cloth solver couldnt be enabled from cmake, also dont use globbing.
2011-04-10 05:43:34 +00:00
mark_as_advanced(WITH_MOD_CLOTH_ELTOPO)
rename cmake WITH_OCEANSIM --> WITH_MOD_OCEANSIM and tag CYCLES_CUDA_BINARIES_ARCH as advanced.
2011-11-13 14:16:43 +00:00
option(WITH_MOD_OCEANSIM "Enable Ocean Modifier" OFF)
CMake options to disable Decimate and Boolean Modifiers: WITH_MOD_BOOLEAN, WITH_MOD_DECIMATE, renamed WITH_FLUID to WITH_MOD_FLUID
2010-10-23 15:40:13 +00:00
CMake: - WITH_LCMS added option, was supported in scons. - commented web plugin option since its not maintained. - some formatting changes and removed includes that are not needed for source/creator/CMakeLists.txt.
2010-06-06 13:32:58 +00:00
# Image format support
Revert changes that disable features on MinGW. To compile on MinGW it is important to have the latest MinGW (gcc 4.6.2) I have updated the instructions on the wiki to reflect this: http://wiki.blender.org/index.php/Dev:2.5/Doc/Building_Blender/Windows/Environment
2012-04-12 08:36:07 +00:00
option(WITH_IMAGE_OPENEXR "Enable OpenEXR Support (http://www.openexr.com)" ON)
use lowercase for cmake builtin names and macros, remove contents in else() and endif() which is no longer needed.
2010-12-08 08:43:06 +00:00
option(WITH_IMAGE_OPENJPEG "Enable OpenJpeg Support (http://www.openjpeg.org)" ON)
Revert changes that disable features on MinGW. To compile on MinGW it is important to have the latest MinGW (gcc 4.6.2) I have updated the instructions on the wiki to reflect this: http://wiki.blender.org/index.php/Dev:2.5/Doc/Building_Blender/Windows/Environment
2012-04-12 08:36:07 +00:00
option(WITH_IMAGE_TIFF "Enable LibTIFF Support" ON)
use lowercase for cmake builtin names and macros, remove contents in else() and endif() which is no longer needed.
2010-12-08 08:43:06 +00:00
option(WITH_IMAGE_DDS "Enable DDS Image Support" ON)
option(WITH_IMAGE_CINEON "Enable CINEON and DPX Image Support" ON)
option(WITH_IMAGE_HDR "Enable HDR Image Support" ON)
option(WITH_IMAGE_REDCODE "Enable RedCode Image Support" OFF)
cmake - option to disable the frame server
2011-07-21 23:06:51 +00:00
option(WITH_IMAGE_FRAMESERVER "Enable image FrameServer Support for rendering" ON)
CMake: - WITH_LCMS added option, was supported in scons. - commented web plugin option since its not maintained. - some formatting changes and removed includes that are not needed for source/creator/CMakeLists.txt.
2010-06-06 13:32:58 +00:00
Add option for CMake to build libredcode, also use CODEC prefix for ffmpeg, quicktime & sndfile options.
2010-11-30 18:52:39 +00:00
# Audio/Video format support
Add libMV and Scons support for MinGW-w64, patches by Caleb Joseph with slight modifications. Thanks!
2012-04-24 12:57:58 +00:00
option(WITH_CODEC_FFMPEG "Enable FFMPeg Support (http://ffmpeg.org)" OFF)
Fix linking issue with MinGW. For some reason ffmpeg needs to be enabled. Some kind of bizarre linking order issue seems to be the case but since it touches so many areas of the code I prefer to simply enable by default.
2012-04-14 21:26:50 +00:00
use lowercase for cmake builtin names and macros, remove contents in else() and endif() which is no longer needed.
2010-12-08 08:43:06 +00:00
option(WITH_CODEC_SNDFILE "Enable libsndfile Support (http://www.mega-nerd.com/libsndfile)" OFF)
if(APPLE OR (WIN32 AND NOT UNIX))
option(WITH_CODEC_QUICKTIME "Enable Quicktime Support" OFF)
endif()
CMake lists initial submission. Documentationand further verification for different platforms will follow soon. This was just tested against current CVS on MSVC 2005 with Verse, QuickTime, OpenEXR, Player all on.
2006-11-17 02:27:12 +00:00
CMake: - WITH_LCMS added option, was supported in scons. - commented web plugin option since its not maintained. - some formatting changes and removed includes that are not needed for source/creator/CMakeLists.txt.
2010-06-06 13:32:58 +00:00
# 3D format support
# disable opencollada on non-apple unix because opencollada has no package for debian
dont return a system path if cmake's 'WITH_INSTALL_PORTABLE' is enabled. this way portable builds wont find scripts in /usr/share.
2011-03-25 05:23:58 +00:00
option(WITH_OPENCOLLADA "Enable OpenCollada Support (http://www.opencollada.org)" OFF)
- remove CPPFLAG XP_UNIX from CMake, Scons and Irix make, checked our own code and /usr/include, its only used in our netscape plugin. - CMake on unix default OpenMP to enabled. - Scons on linux default OpenMP to enabled. - copying python is slow, for scons only copy if the directory has not been created.
2009-11-19 11:49:42 +00:00
CMake: - WITH_LCMS added option, was supported in scons. - commented web plugin option since its not maintained. - some formatting changes and removed includes that are not needed for source/creator/CMakeLists.txt.
2010-06-06 13:32:58 +00:00
# Sound output
use lowercase for cmake builtin names and macros, remove contents in else() and endif() which is no longer needed.
2010-12-08 08:43:06 +00:00
option(WITH_SDL "Enable SDL for sound and joystick support" ON)
option(WITH_OPENAL "Enable OpenAL Support (http://www.openal.org)" ON)
option(WITH_JACK "Enable Jack Support (http://www.jackaudio.org)" OFF)
CMake: - WITH_LCMS added option, was supported in scons. - commented web plugin option since its not maintained. - some formatting changes and removed includes that are not needed for source/creator/CMakeLists.txt.
2010-06-06 13:32:58 +00:00
# Compression
use lowercase for cmake builtin names and macros, remove contents in else() and endif() which is no longer needed.
2010-12-08 08:43:06 +00:00
option(WITH_LZO "Enable fast LZO compression (used for pointcache)" ON)
option(WITH_LZMA "Enable best LZMA compression, (used for pointcache)" ON)
CMake: - WITH_LCMS added option, was supported in scons. - commented web plugin option since its not maintained. - some formatting changes and removed includes that are not needed for source/creator/CMakeLists.txt.
2010-06-06 13:32:58 +00:00
Camera tracking integration =========================== Commiting camera tracking integration gsoc project into trunk. This commit includes: - Bundled version of libmv library (with some changes against official repo, re-sync with libmv repo a bit later) - New datatype ID called MovieClip which is optimized to work with movie clips (both of movie files and image sequences) and doing camera/motion tracking operations. - New editor called Clip Editor which is currently used for motion/tracking stuff only, but which can be easily extended to work with masks too. This editor supports: * Loading movie files/image sequences * Build proxies with different size for loaded movie clip, also supports building undistorted proxies to increase speed of playback in undistorted mode. * Manual lens distortion mode calibration using grid and grease pencil * Supervised 2D tracking using two different algorithms KLT and SAD. * Basic algorithm for feature detection * Camera motion solving. scene orientation - New constraints to "link" scene objects with solved motions from clip: * Follow Track (make object follow 2D motion of track with given name or parent object to reconstructed 3D position of track) * Camera Solver to make camera moving in the same way as reconstructed camera This commit NOT includes changes from tomato branch: - New nodes (they'll be commited as separated patch) - Automatic image offset guessing for image input node and image editor (need to do more tests and gather more feedback) - Code cleanup in libmv-capi. It's not so critical cleanup, just increasing readability and understanadability of code. Better to make this chaneg when Keir will finish his current patch. More details about this project can be found on this page: http://wiki.blender.org/index.php/User:Nazg-gul/GSoC-2011 Further development of small features would be done in trunk, bigger/experimental features would first be implemented in tomato branch.
2011-11-07 12:55:18 +00:00
# Camera/motion tracking
option(WITH_LIBMV "Enable libmv structure from motion library" ON)
Carve booleans library integration ================================== Merging Carve library integration project into the trunk. This commit switches Boolean modifier to another library which handles mesh boolean operations in much stable and faster way, resolving old well-known limitations of intern boolop library. Carve is integrating as alternative interface for boolop library and which makes it totally transparent for blender sources to switch between old-fashioned boolop and new Carve backends. Detailed changes in this commit: - Integrated needed subset of Carve library sources into extern/ Added script for re-bundling it (currently works only if repo was cloned by git-svn). - Added BOP_CarveInterface for boolop library which can be used by Boolean modifier. - Carve backend is enabled by default, can be disabled by WITH_BF_CARVE SCons option and WITH_CARVE CMake option. - If Boost library is found in build environment it'll be used for unordered collections. If Boost isn't found, it'll fallback to TR1 implementation for GCC compilers. Boost is obligatory if MSVC is used. Tested on Linux 64bit and Windows 7 64bit. NOTE: behavior of flat objects was changed. E.g. Plane-Sphere now gives plane with circle hole, not plane with semisphere. Don't think it's really issue because it's not actually defined behavior in such situations and both of ways might be useful. Since it's only known "regression" think it's OK to deal with it. Details are there http://wiki.blender.org/index.php/User:Nazg-gul/CarveBooleans Special thanks to: - Ken Hughes: author of original carve integration patch. - Campbell Barton: help in project development, review tests. - Tobias Sargeant: author of Carve library, help in resolving some merge stoppers, bug fixing.
2012-01-16 16:46:00 +00:00
# Mesh boolean lib
option(WITH_CARVE "Enable Carve library to handle mesh boolean operations" ON)
CMake: - WITH_LCMS added option, was supported in scons. - commented web plugin option since its not maintained. - some formatting changes and removed includes that are not needed for source/creator/CMakeLists.txt.
2010-06-06 13:32:58 +00:00
# Misc
enable NDOF by default with cmake again, but check if it can be found on OSX, if not disable. I cant test this but at least if I made a mistake it will just not find the SDK and disable. an osx dev needs to test.
2011-08-03 14:18:02 +00:00
option(WITH_INPUT_NDOF "Enable NDOF input devices (SpaceNavigator and friends)" ON)
formatting edits only
2011-09-30 15:51:58 +00:00
option(WITH_RAYOPTIMIZATION "Enable use of SIMD (SSE) optimizations for the raytracer" ON)
CMake: Linux/Unix Only, use 'install' target rather then copying files with post-build commands. Main change is that you need to run 'make install', which copies files to ./bin by default unless WITH_INSTALL_PORTABLE is OFF, where CMAKE_INSTALL_PREFIX is used for a typical unix-system install.
2011-03-06 11:41:30 +00:00
if(UNIX AND NOT APPLE)
option(WITH_INSTALL_PORTABLE "Install redistributeable runtime, otherwise install into CMAKE_INSTALL_PREFIX" ON)
endif()
use lowercase for cmake builtin names and macros, remove contents in else() and endif() which is no longer needed.
2010-12-08 08:43:06 +00:00
option(WITH_PYTHON_INSTALL "Copy system python into the blender install folder" ON)
WITH_PYTHON_INSTALL_NUMPY option for unix/cmake, just copies from site-packages.
2012-04-30 09:38:32 +00:00
option(WITH_PYTHON_INSTALL_NUMPY "Copy system numpy into the blender install folder" ON)
cmake - improved detection of numpy, now works for typical ubuntu installation. numpy directory can be referenced manually with the advanced option PYTHON_NUMPY_PATH if needed.
2012-05-01 23:22:58 +00:00
set(PYTHON_NUMPY_PATH "" CACHE PATH "Python to python site-packages or dist-packages containing 'numpy' module")
mark_as_advanced(PYTHON_NUMPY_PATH)
cmake edits - only show mingw option when building with mingw - always run cmake configure with convenience build targets so failed configurations stop re-configuring. - disable WITH_GHOST_XDND in 'make lite'
2012-05-27 10:03:13 +00:00
if(MINGW)
option(WITH_MINGW64 "Use the 64-bit version of MinGW" OFF)
mark_as_advanced(WITH_MINGW64)
endif()
CMake: - WITH_LCMS added option, was supported in scons. - commented web plugin option since its not maintained. - some formatting changes and removed includes that are not needed for source/creator/CMakeLists.txt.
2010-06-06 13:32:58 +00:00
Cycles: hook up the CMake build system. New build instructions for Ubuntu Linux in the wiki: http://wiki.blender.org/index.php/Dev:2.5/Source/Cycles
2011-04-28 13:47:27 +00:00
# Cycles
Revert changes that disable features on MinGW. To compile on MinGW it is important to have the latest MinGW (gcc 4.6.2) I have updated the instructions on the wiki to reflect this: http://wiki.blender.org/index.php/Dev:2.5/Doc/Building_Blender/Windows/Environment
2012-04-12 08:36:07 +00:00
option(WITH_CYCLES "Enable cycles Render Engine" ON)
Cycles: * Add back option to bundle CUDA kernel binaries with builds. * Disable runtime CUDA kernel compilation on Windows, couldn't get this working, since it seems to depend on visual studio being installed, even though for this particular case it shouldn't be needed. CMake only at the moment. * Runtime compilation on linux/mac should now work if nvcc is not installed in the default location, but available in PATH.
2011-11-10 12:52:17 +00:00
option(WITH_CYCLES_TEST "Build cycles test application" OFF)
Cycles / OSL: * Compile option to build with OSL, disabled by default.
2012-06-04 16:30:15 +00:00
option(WITH_CYCLES_OSL "Build Cycles with OSL support" OFF)
Cycles: * Add back option to bundle CUDA kernel binaries with builds. * Disable runtime CUDA kernel compilation on Windows, couldn't get this working, since it seems to depend on visual studio being installed, even though for this particular case it shouldn't be needed. CMake only at the moment. * Runtime compilation on linux/mac should now work if nvcc is not installed in the default location, but available in PATH.
2011-11-10 12:52:17 +00:00
option(WITH_CYCLES_CUDA_BINARIES "Build cycles CUDA binaries" OFF)
reenable sm13 for win32 cmake
2012-05-29 16:18:10 +00:00
set(CYCLES_CUDA_BINARIES_ARCH sm_13 sm_20 sm_21 CACHE STRING "CUDA architectures to build binaries for")
rename cmake WITH_OCEANSIM --> WITH_MOD_OCEANSIM and tag CYCLES_CUDA_BINARIES_ARCH as advanced.
2011-11-13 14:16:43 +00:00
mark_as_advanced(CYCLES_CUDA_BINARIES_ARCH)
Disable building of CUDA 1.3 kernels for cycles for win32 cmake and mingw32 scons. They were already disabled for scons MSVC 32bit.
2012-05-22 12:30:37 +00:00
unset(PLATFORM_DEFAULT)
Cycles: hook up the CMake build system. New build instructions for Ubuntu Linux in the wiki: http://wiki.blender.org/index.php/Dev:2.5/Source/Cycles
2011-04-28 13:47:27 +00:00
option to link with jemalloc on *nix, off by default.
2011-05-12 11:16:32 +00:00
# disable for now, but plan to support on all platforms eventually
option(WITH_MEM_JEMALLOC "Enable malloc replacement (http://www.canonware.com/jemalloc)" OFF)
mark_as_advanced(WITH_MEM_JEMALLOC)
cmake - mark vars as advanced so they dont show up by default when configuring.
2010-12-08 09:02:08 +00:00
# Debug
when checking for windows check sys.platform starts with "win" rather then '== "win32"' & avoid importing platform. also add some notes to CMake options.
2011-03-11 01:24:16 +00:00
option(WITH_CXX_GUARDEDALLOC "Enable GuardedAlloc for C++ memory allocation tracking (only enable for development)" OFF)
cmake - mark vars as advanced so they dont show up by default when configuring.
2010-12-08 09:02:08 +00:00
mark_as_advanced(WITH_CXX_GUARDEDALLOC)
rename BKE_assert() --> BLI_assert().
2011-01-09 15:12:08 +00:00
option(WITH_ASSERT_ABORT "Call abort() when raising an assertion through BLI_assert()" OFF)
BKE_assert(), only prints the error unless cmake define WITH_ASSERT_ABORT is enabled and it will call abort(). made this option advanced so people don't enable along with other features.
2010-12-15 10:22:26 +00:00
mark_as_advanced(WITH_ASSERT_ABORT)
debug build option WITH_PYTHON_UI_INFO, so you can right click and edit the python source for UI layout directly.
2011-10-20 00:48:00 +00:00
use lowercase for cmake builtin names and macros, remove contents in else() and endif() which is no longer needed.
2010-12-08 08:43:06 +00:00
if(APPLE)
CMake/OSX: Bugfix [#26375]: Add default values for the OSX architecture: x86_64 (also used to select the python dynlibs that'll be bundled with the application). Set deployment target to be 10.5 by default. Fix broken build introduced by recent source/creator/CMakeList.txt cleanup
2011-03-07 21:28:36 +00:00
if(NOT CMAKE_OSX_ARCHITECTURES)
set(CMAKE_OSX_ARCHITECTURES x86_64 CACHE STRING
"Choose the architecture you want to build Blender for: i386, x86_64 or ppc"
FORCE)
endif()
OSX/cmake: ensure newest Xcode compatibility, important: still needs a patched cmake ( see error you will get if missed ), patched cmake provided here: http://www.jensverwiebe.de/Blender/CMake%202.8-7patched.zip
2012-03-10 16:21:48 +00:00
execute_process(COMMAND uname -r OUTPUT_VARIABLE MAC_SYS) # check for actual system-version
if (${MAC_SYS} MATCHES 11)
set(OSX_SYSTEM 10.7)
elseif(${MAC_SYS} MATCHES 10)
set(OSX_SYSTEM 10.6)
elseif(${MAC_SYS} MATCHES 9)
set(OSX_SYSTEM 10.5)
else()
set(OSX_SYSTEM unsupported)
CMake/OSX: Bugfix [#26375]: Add default values for the OSX architecture: x86_64 (also used to select the python dynlibs that'll be bundled with the application). Set deployment target to be 10.5 by default. Fix broken build introduced by recent source/creator/CMakeList.txt cleanup
2011-03-07 21:28:36 +00:00
endif()
OSX/cmake: ensure newest Xcode compatibility, important: still needs a patched cmake ( see error you will get if missed ), patched cmake provided here: http://www.jensverwiebe.de/Blender/CMake%202.8-7patched.zip
2012-03-10 16:21:48 +00:00
message(STATUS "Detected system-version: " ${OSX_SYSTEM})
OSX/cmake: use again 10.5 as general deployment target ( pls verify 10.5 compatibility works with automatic weaklinking), use now then sdk which for sure exists, remove obsolete slash
2012-03-12 12:03:52 +00:00
if(NOT CMAKE_OSX_DEPLOYMENT_TARGET)
set(CMAKE_OSX_DEPLOYMENT_TARGET "10.5" CACHE STRING "" FORCE) # 10.5 is our minimum target, if you have higher sdk, weak linking happens
OSX/cmake: ensure newest Xcode compatibility, important: still needs a patched cmake ( see error you will get if missed ), patched cmake provided here: http://www.jensverwiebe.de/Blender/CMake%202.8-7patched.zip
2012-03-10 16:21:48 +00:00
endif()
Fix cmake warning on Mac, when not using Xcode generator.
2012-02-20 14:19:45 +00:00
if(${CMAKE_GENERATOR} MATCHES "Xcode")
OSX/cmake: move the xcode 4.3 warning up, it was not shown due error happened before, masking it
2012-03-15 15:32:56 +00:00
##### workaround for actual official cmake incompatibility with xcode 4.3 #####
if(${XCODE_VERSION} MATCHES '') # cmake fails due looking for xcode in the wrong path, thus will be empty var
message("Official cmake does not yet support Xcode 4.3, get a patched version here: http://www.jensverwiebe.de/Blender/CMake%202.8-7patched.zip")
endif()
### end workaround for actual official cmake incompatibility with xcode 4.3 ###
OSX/cmake: enable clang compiler with xcode >= 4.3, tested o.k.now
2012-03-14 23:42:46 +00:00
if(${XCODE_VERSION} VERSION_EQUAL 4 OR ${XCODE_VERSION} VERSION_GREATER 4 AND ${XCODE_VERSION} VERSION_LESS 4.3)
Fix cmake warning on Mac, when not using Xcode generator.
2012-02-20 14:19:45 +00:00
# Xcode 4 defaults to the Apple LLVM Compiler.
OSX/cmake: enable clang compiler with xcode >= 4.3, tested o.k.now
2012-03-14 23:42:46 +00:00
# Override the default compiler selection because Blender only compiles with gcc up to xcode 4.2
Fix cmake warning on Mac, when not using Xcode generator.
2012-02-20 14:19:45 +00:00
set(CMAKE_XCODE_ATTRIBUTE_GCC_VERSION "com.apple.compilers.llvmgcc42")
message(STATUS "Setting compiler to: " ${CMAKE_XCODE_ATTRIBUTE_GCC_VERSION})
endif()
OSX/cmake: ensure newest Xcode compatibility, important: still needs a patched cmake ( see error you will get if missed ), patched cmake provided here: http://www.jensverwiebe.de/Blender/CMake%202.8-7patched.zip
2012-03-10 16:21:48 +00:00
else() # unix makefile generator does not fill XCODE_VERSION var, so we get it with a command
attempt to fix osx build error
2012-05-17 14:00:54 +00:00
execute_process(COMMAND xcodebuild -version OUTPUT_VARIABLE XCODE_VERS_BUILD_NR)
string(SUBSTRING "${XCODE_VERS_BUILD_NR}" 6 3 XCODE_VERSION) # truncate away build-nr
unset(XCODE_VERS_BUILD_NR)
patch from Peter Stern to fix CMake building on OSX (without manual editing of configuration)
2012-02-02 11:08:48 +00:00
endif()
OSX/cmake: ensure newest Xcode compatibility, important: still needs a patched cmake ( see error you will get if missed ), patched cmake provided here: http://www.jensverwiebe.de/Blender/CMake%202.8-7patched.zip
2012-03-10 16:21:48 +00:00
message(STATUS "Detected Xcode-version: " ${XCODE_VERSION})
use lowercase for cmake builtin names and macros, remove contents in else() and endif() which is no longer needed.
2010-12-08 08:43:06 +00:00
option(WITH_COCOA "Use Cocoa framework instead of deprecated Carbon" ON)
option(USE_QTKIT "Use QtKit instead of Carbon quicktime (needed for having partial quicktime for 64bit)" OFF)
option(WITH_LIBS10.5 "Use 10.5 libs (needed for 64bit builds)" OFF)
endif()
CMake: - WITH_LCMS added option, was supported in scons. - commented web plugin option since its not maintained. - some formatting changes and removed includes that are not needed for source/creator/CMakeLists.txt.
2010-06-06 13:32:58 +00:00
print warning when release/datafiles/locale is missing when building with cmake (git-svn causes this).
2012-03-13 22:27:21 +00:00
don't write file history in backgound mode (running ctest would overwrite all my recent-files.txt), and add an error about mingw/quicktime being unsupported.
2011-06-08 01:53:12 +00:00
#-----------------------------------------------------------------------------
# Check for conflicting/unsupported configurations
Cycles: support for motion vector and UV passes. Most of the changes are related to adding support for motion data throughout the code. There's some code for actual camera/object motion blur raytracing but it's unfinished (it badly slows down the raytracing kernel even when the option is turned off), so that code it disabled still. Motion vector export from Blender tries to avoid computing derived meshes when the mesh does not have a deforming modifier, and it also won't store motion vectors for every vertex if only the object or camera is moving.
2012-04-30 12:49:26 +00:00
if(NOT WITH_BLENDER AND NOT WITH_PLAYER AND NOT WITH_CYCLES_TEST)
Advanced CMake option to build the player without blender: WITH_BLENDER
2011-07-13 08:15:06 +00:00
message(FATAL_ERROR "At least one of WITH_BLENDER or WITH_PLAYER must be enabled, nothing to do!")
endif()
use lowercase for cmake builtin names and macros, remove contents in else() and endif() which is no longer needed.
2010-12-08 08:43:06 +00:00
if(NOT WITH_GAMEENGINE AND WITH_PLAYER)
message(FATAL_ERROR "WITH_PLAYER requires WITH_GAMEENGINE")
endif()
CMake lists initial submission. Documentationand further verification for different platforms will follow soon. This was just tested against current CVS on MSVC 2005 with Verse, QuickTime, OpenEXR, Player all on.
2006-11-17 02:27:12 +00:00
use 'const float[3]' for derived mesh callback args.
2012-04-09 07:06:06 +00:00
if(NOT WITH_AUDASPACE AND (WITH_OPENAL OR WITH_SDL OR WITH_JACK OR WITH_GAMEENGINE))
message(FATAL_ERROR "WITH_OPENAL/WITH_SDL/WITH_JACK/WITH_CODEC_FFMPEG/WITH_GAMEENGINE require WITH_AUDASPACE")
cmake option to build without an audio library.
2011-06-23 09:27:56 +00:00
endif()
- don't build ghost's event printer unless ghost debug is enabled. - use char rather then STR_String for the event printer. - added option to build WITH_GHOST_DEBUG for cmake - renamed WITH_SDL_GHOST --> WITH_GHOST_SDL
2011-07-13 06:04:54 +00:00
if(NOT WITH_SDL AND WITH_GHOST_SDL)
message(FATAL_ERROR "WITH_GHOST_SDL requires WITH_SDL to be ON")
build option to use SDL 1.3 for GHOST rather then X11/Win32/Cocoa api's, This opens up the option for blender to be more easily ported to other devices, OS's. TODO - continuous grab. - text glitch with multiple windows (was a bug in X11 too for a while, will check on this)
2011-07-12 13:17:54 +00:00
endif()
use warnigns for all msvc configurations
2012-01-06 05:13:36 +00:00
if(WITH_IMAGE_REDCODE AND ((NOT WITH_IMAGE_OPENJPEG) OR (NOT WITH_CODEC_FFMPEG)))
message(FATAL_ERROR "WITH_IMAGE_REDCODE requires WITH_IMAGE_OPENJPEG and WITH_CODEC_FFMPEG")
use lowercase for cmake builtin names and macros, remove contents in else() and endif() which is no longer needed.
2010-12-08 08:43:06 +00:00
endif()
Add option for CMake to build libredcode, also use CODEC prefix for ffmpeg, quicktime & sndfile options.
2010-11-30 18:52:39 +00:00
disable some conflicting options WITH_PYTHON_MODULE
2011-02-22 14:27:46 +00:00
# python module, needs some different options
if(WITH_PYTHON_MODULE AND WITH_PLAYER)
message(FATAL_ERROR "WITH_PYTHON_MODULE requires WITH_PLAYER to be OFF")
endif()
if(WITH_PYTHON_MODULE AND WITH_PYTHON_INSTALL)
message(FATAL_ERROR "WITH_PYTHON_MODULE requires WITH_PYTHON_INSTALL to be OFF")
endif()
cmake/mingw now builds with default configuration (needed to disable tiff/exr/cycles)
2012-04-12 05:34:17 +00:00
rename cmake WITH_OCEANSIM --> WITH_MOD_OCEANSIM and tag CYCLES_CUDA_BINARIES_ARCH as advanced.
2011-11-13 14:16:43 +00:00
if(NOT WITH_FFTW3 AND WITH_MOD_OCEANSIM)
message(FATAL_ERROR "WITH_MOD_OCEANSIM requires WITH_FFTW3 to be ON")
Ocean Sim modifier patch by Matt Ebb, Hamed Zaghaghi This adds a new Modifier "Ocean" to simulate large-scale wave motion. Details can be found in the wiki documentation [1], the project homepage [2] and the patch tracker [3] The modifier is disabled by default for now. To enable it, the WITH_OCEANSIM (cmake) / WITH_BF_OCEANSIM (scons) flags have to be set. The code depends on fftw3, so this also has to be enabled. [1] http://wiki.blender.org/index.php/Doc:2.6/Manual/Modifiers/Simulation/Ocean [2] http://www.savetheoceansim.com [3] http://projects.blender.org/tracker/?group_id=9&atid=127&func=detail&aid=28338
2011-11-13 12:17:27 +00:00
endif()
CMake option 'WITH_HEADLESS' to build blender in headless mode (no x11/xlib) with NULL ghost classe.
2011-06-04 14:12:55 +00:00
# may as well build python module without a UI
if(WITH_PYTHON_MODULE)
set(WITH_HEADLESS ON)
endif()
Carve booleans library integration ================================== Merging Carve library integration project into the trunk. This commit switches Boolean modifier to another library which handles mesh boolean operations in much stable and faster way, resolving old well-known limitations of intern boolop library. Carve is integrating as alternative interface for boolop library and which makes it totally transparent for blender sources to switch between old-fashioned boolop and new Carve backends. Detailed changes in this commit: - Integrated needed subset of Carve library sources into extern/ Added script for re-bundling it (currently works only if repo was cloned by git-svn). - Added BOP_CarveInterface for boolop library which can be used by Boolean modifier. - Carve backend is enabled by default, can be disabled by WITH_BF_CARVE SCons option and WITH_CARVE CMake option. - If Boost library is found in build environment it'll be used for unordered collections. If Boost isn't found, it'll fallback to TR1 implementation for GCC compilers. Boost is obligatory if MSVC is used. Tested on Linux 64bit and Windows 7 64bit. NOTE: behavior of flat objects was changed. E.g. Plane-Sphere now gives plane with circle hole, not plane with semisphere. Don't think it's really issue because it's not actually defined behavior in such situations and both of ways might be useful. Since it's only known "regression" think it's OK to deal with it. Details are there http://wiki.blender.org/index.php/User:Nazg-gul/CarveBooleans Special thanks to: - Ken Hughes: author of original carve integration patch. - Campbell Barton: help in project development, review tests. - Tobias Sargeant: author of Carve library, help in resolving some merge stoppers, bug fixing.
2012-01-16 16:46:00 +00:00
# auto enable openimageio for cycles
Cycles: * add some (disabled) test code for using OpenImageIO in imbuf * link cycles, openimageio and boost into blender instead of a shared library * some cmakefile changes to simplify the code and follow conventions better * this may solve running cycles problems on windows XP, or give a different and hopefully more useful error message
2011-08-16 16:15:34 +00:00
if(WITH_CYCLES)
set(WITH_OPENIMAGEIO ON)
Carve booleans library integration ================================== Merging Carve library integration project into the trunk. This commit switches Boolean modifier to another library which handles mesh boolean operations in much stable and faster way, resolving old well-known limitations of intern boolop library. Carve is integrating as alternative interface for boolop library and which makes it totally transparent for blender sources to switch between old-fashioned boolop and new Carve backends. Detailed changes in this commit: - Integrated needed subset of Carve library sources into extern/ Added script for re-bundling it (currently works only if repo was cloned by git-svn). - Added BOP_CarveInterface for boolop library which can be used by Boolean modifier. - Carve backend is enabled by default, can be disabled by WITH_BF_CARVE SCons option and WITH_CARVE CMake option. - If Boost library is found in build environment it'll be used for unordered collections. If Boost isn't found, it'll fallback to TR1 implementation for GCC compilers. Boost is obligatory if MSVC is used. Tested on Linux 64bit and Windows 7 64bit. NOTE: behavior of flat objects was changed. E.g. Plane-Sphere now gives plane with circle hole, not plane with semisphere. Don't think it's really issue because it's not actually defined behavior in such situations and both of ways might be useful. Since it's only known "regression" think it's OK to deal with it. Details are there http://wiki.blender.org/index.php/User:Nazg-gul/CarveBooleans Special thanks to: - Ken Hughes: author of original carve integration patch. - Campbell Barton: help in project development, review tests. - Tobias Sargeant: author of Carve library, help in resolving some merge stoppers, bug fixing.
2012-01-16 16:46:00 +00:00
endif()
# auto enable boost for cycles and carve
if(WITH_CYCLES OR WITH_CARVE)
Cycles: * add some (disabled) test code for using OpenImageIO in imbuf * link cycles, openimageio and boost into blender instead of a shared library * some cmakefile changes to simplify the code and follow conventions better * this may solve running cycles problems on windows XP, or give a different and hopefully more useful error message
2011-08-16 16:15:34 +00:00
set(WITH_BOOST ON)
endif()
cmake: skip rpath (paths to libs) for portable distrobution
2011-08-23 20:19:08 +00:00
# don't store paths to libs for portable distrobution
if(WITH_INSTALL_PORTABLE)
set(CMAKE_SKIP_BUILD_RPATH TRUE)
endif()
WITH_GHOST_SDL working again (missing std:: update)
2012-03-13 14:28:58 +00:00
if(WITH_GHOST_SDL OR WITH_HEADLESS)
cmake/mingw now builds with default configuration (needed to disable tiff/exr/cycles)
2012-04-12 05:34:17 +00:00
set(WITH_GHOST_XDND OFF)
WITH_GHOST_SDL working again (missing std:: update)
2012-03-13 14:28:58 +00:00
endif()
disallow invalid mingw configurations, not just disable by default but disallow the built to run if they are set by the developer.
2012-04-15 07:32:56 +00:00
if(MINGW)
if(WITH_CODEC_QUICKTIME)
message(FATAL_ERROR "MINGW requires WITH_CODEC_QUICKTIME to be OFF "
"because it is currently unsupported, remove this "
"line if youre a developer who wants to add support.")
endif()
endif()
print warning when release/datafiles/locale is missing when building with cmake (git-svn causes this).
2012-03-13 22:27:21 +00:00
TEST_SSE_SUPPORT(COMPILER_SSE_FLAG COMPILER_SSE2_FLAG)
WITH_GHOST_SDL working again (missing std:: update)
2012-03-13 14:28:58 +00:00
documentation edit to address bmesh py api bug [#30453] warn when addons are not found when running cmake.
2012-03-14 00:30:20 +00:00
#-----------------------------------------------------------------------------
# Check for valid directories
# ... svn extern paths can be missing because of svn-git.
if(WITH_INTERNATIONAL)
if(NOT EXISTS "${CMAKE_SOURCE_DIR}/release/datafiles/locale")
message(WARNING "Translation path '${CMAKE_SOURCE_DIR}/release/datafiles/locale' is missing, "
"This is an 'svn external', which are known not to work with bridges to other version "
"control systems, disabling 'WITH_INTERNATIONAL'.")
set(WITH_INTERNATIONAL OFF)
endif()
endif()
if(WITH_PYTHON)
if(NOT EXISTS "${CMAKE_SOURCE_DIR}/release/scripts/addons")
message(WARNING "Addons path '${CMAKE_SOURCE_DIR}/release/scripts/addons' is missing, "
"This is an 'svn external', which are known not to work with bridges to other version "
"control systems: * CONTINUING WITHOUT ADDONS *")
endif()
endif()
cmake was using dna source list with the variable out of scope, possibly causing dependency problems.
2011-02-22 06:23:07 +00:00
#-----------------------------------------------------------------------------
# Initialize un-cached vars, avoid unused warning
build python module without binreloc, add dummy argv[0] to initialize bprogname.
2011-02-21 13:13:08 +00:00
# linux only, not cached
set(WITH_BINRELOC OFF)
formatting edits only
2011-09-30 15:51:58 +00:00
# MAXOSX only, set to avoid uninitialized
cmake: - fix for cmake's SSE detection which would fail because of strict warnings and also had redundant cache setting. - was incorrectly initializing variables (own bad) - python was searching for libs on every run, now only do this if there not cached.
2011-10-01 19:52:33 +00:00
set(EXETYPE "")
cleanup for cmake msvc build options, reference some libs directly, fix conflicting flags /Ob1 and /Zi for debug
2011-06-28 02:49:49 +00:00
# C/C++ flags
set(PLATFORM_CFLAGS)
cmake: correct uninitialized vars
2011-06-14 00:24:50 +00:00
cmake was using dna source list with the variable out of scope, possibly causing dependency problems.
2011-02-22 06:23:07 +00:00
# these are added to later on.
cleanup for cmake msvc build options, reference some libs directly, fix conflicting flags /Ob1 and /Zi for debug
2011-06-28 02:49:49 +00:00
set(C_WARNINGS)
set(CXX_WARNINGS)
correct flags for older GCC's which dont suppport -Wno-deprecated-declarations, detect if the flag is supported before use
2011-10-30 04:48:00 +00:00
# for gcc -Wno-blah-blah
set(CC_REMOVE_STRICT_FLAGS)
cleanup for cmake msvc build options, reference some libs directly, fix conflicting flags /Ob1 and /Zi for debug
2011-06-28 02:49:49 +00:00
# libraries to link the binary with passed to target_link_libraries()
# known as LLIBS to scons
cmake: - fix for cmake's SSE detection which would fail because of strict warnings and also had redundant cache setting. - was incorrectly initializing variables (own bad) - python was searching for libs on every run, now only do this if there not cached.
2011-10-01 19:52:33 +00:00
set(PLATFORM_LINKLIBS "")
cleanup for cmake msvc build options, reference some libs directly, fix conflicting flags /Ob1 and /Zi for debug
2011-06-28 02:49:49 +00:00
# Added to linker flags in setup_liblinks
# - CMAKE_EXE_LINKER_FLAGS
# - CMAKE_EXE_LINKER_FLAGS_DEBUG
cmake: - fix for cmake's SSE detection which would fail because of strict warnings and also had redundant cache setting. - was incorrectly initializing variables (own bad) - python was searching for libs on every run, now only do this if there not cached.
2011-10-01 19:52:33 +00:00
set(PLATFORM_LINKFLAGS "")
set(PLATFORM_LINKFLAGS_DEBUG "")
cmake was using dna source list with the variable out of scope, possibly causing dependency problems.
2011-02-22 06:23:07 +00:00
CMake: - WITH_LCMS added option, was supported in scons. - commented web plugin option since its not maintained. - some formatting changes and removed includes that are not needed for source/creator/CMakeLists.txt.
2010-06-06 13:32:58 +00:00
# disabled for now, not supported
use lowercase for cmake builtin names and macros, remove contents in else() and endif() which is no longer needed.
2010-12-08 08:43:06 +00:00
# option(WITH_WEBPLUGIN "Enable Web Plugin (Unix only)" OFF)
CMake: - WITH_LCMS added option, was supported in scons. - commented web plugin option since its not maintained. - some formatting changes and removed includes that are not needed for source/creator/CMakeLists.txt.
2010-06-06 13:32:58 +00:00
CMake: Provide better control over Python versions and library locations for both Mac and Unix and add to documentation
2006-12-06 08:52:43 +00:00
# For alternate Python locations the commandline can be used to override detected/default cache settings, e.g:
formatting edits only
2011-09-30 15:51:58 +00:00
# On Unix:
- correct python3.1 warning message. - for new shadow only enum, use humanly readable RNA enum values. - update cmake unix example for custom python.
2011-03-08 22:11:15 +00:00
# cmake ../blender \
# -D PYTHON_VERSION=3.2 \
cmake: add find jack module
2011-06-19 15:03:50 +00:00
# -D PYTHON_INCLUDE_DIR=/opt/py32/include/python3.2d \
# -D PYTHON_LIBRARY=/opt/py32/lib/libpython3.2d.so
- correct python3.1 warning message. - for new shadow only enum, use humanly readable RNA enum values. - update cmake unix example for custom python.
2011-03-08 22:11:15 +00:00
#
formatting edits only
2011-09-30 15:51:58 +00:00
# On Macs:
- correct python3.1 warning message. - for new shadow only enum, use humanly readable RNA enum values. - update cmake unix example for custom python.
2011-03-08 22:11:15 +00:00
# cmake ../blender \
cmake: add find jack module
2011-06-19 15:03:50 +00:00
# -D PYTHON_INCLUDE_DIR=/System/Library/Frameworks/Python.framework/Versions/3.2/include/python3.2 \
- correct python3.1 warning message. - for new shadow only enum, use humanly readable RNA enum values. - update cmake unix example for custom python.
2011-03-08 22:11:15 +00:00
# -D PYTHON_LIBPATH=/System/Library/Frameworks/Python.framework/Versions/3.2/lib/python3.2/config \
# -G Xcode
CMake: Provide better control over Python versions and library locations for both Mac and Unix and add to documentation
2006-12-06 08:52:43 +00:00
#
== docs == - moved files in proper directories and adapted paths where needed - deleted doc/oldbugs.txt (asked confirmation to jesterking a week ago in irc) - still working on doxygen files, for now I'll leave them in doc/ - NOTE: while checking if other files were referring to these files, I noted that "GPL-license.txt" is also used in the files below: - release/windows/installer/00.sconsblender.nsi - release/windows/specific.sh but these files should't be affected by this commit, but please check :)
2010-10-13 14:44:22 +00:00
# When changing any of this remember to update the notes in doc/build_systems/cmake.txt
CMake: Provide better control over Python versions and library locations for both Mac and Unix and add to documentation
2006-12-06 08:52:43 +00:00
CMake lists initial submission. Documentationand further verification for different platforms will follow soon. This was just tested against current CVS on MSVC 2005 with Verse, QuickTime, OpenEXR, Player all on.
2006-11-17 02:27:12 +00:00
#-----------------------------------------------------------------------------
#Platform specifics
use lowercase for cmake builtin names and macros, remove contents in else() and endif() which is no longer needed.
2010-12-08 08:43:06 +00:00
if(UNIX AND NOT APPLE)
formatting edits only
2011-09-30 15:51:58 +00:00
CMake/Scons: automatically use ffmpeg, boost and openimageio from the svn lib/ directory if available, which should make building with ffmpeg and cycles easier. If this folder is not available or another path is specified in user-config.py or CMakeCache.txt, this should have no effect. Wiki build instructions now show how to use these. http://wiki.blender.org/index.php/Dev:2.5/Doc/Building_Blender/Linux
2011-11-11 14:52:24 +00:00
# set lib directory if it exists
if(CMAKE_SYSTEM_NAME MATCHES "Linux")
if("${CMAKE_SIZEOF_VOID_P}" EQUAL "8")
set(LIBDIR ${CMAKE_SOURCE_DIR}/../lib/linux64)
else()
set(LIBDIR ${CMAKE_SOURCE_DIR}/../lib/linux)
endif()
if(NOT EXISTS ${LIBDIR})
unset(LIBDIR)
endif()
endif()
cmake: added FindOpenJPEG module.
2011-06-19 07:46:24 +00:00
find_package(JPEG REQUIRED)
find_package(PNG REQUIRED)
find_package(ZLIB REQUIRED)
find_package(Freetype REQUIRED)
if(WITH_PYTHON)
# No way to set py32. remove for now.
# find_package(PythonLibs)
# Use our own instead, since wothout py is such a rare case,
# require this package
find_package(PythonLibsUnix REQUIRED)
endif()
if(WITH_IMAGE_OPENEXR)
find_package(OpenEXR) # our own module
if(NOT OPENEXR_FOUND)
set(WITH_IMAGE_OPENEXR OFF)
endif()
endif()
if(WITH_IMAGE_OPENJPEG)
find_package(OpenJPEG)
if(NOT OPENJPEG_FOUND)
set(WITH_IMAGE_OPENJPEG OFF)
endif()
endif()
if(WITH_IMAGE_TIFF)
find_package(TIFF)
if(NOT TIFF_FOUND)
set(WITH_IMAGE_TIFF OFF)
endif()
endif()
# Audio IO
use lowercase for cmake builtin names and macros, remove contents in else() and endif() which is no longer needed.
2010-12-08 08:43:06 +00:00
if(WITH_OPENAL)
find_package(OpenAL)
if(NOT OPENAL_FOUND)
set(WITH_OPENAL OFF)
endif()
endif()
cmake: added FindOpenJPEG module.
2011-06-19 07:46:24 +00:00
if(WITH_SDL)
find_package(SDL)
formatting edits only
2011-09-30 15:51:58 +00:00
mark_as_advanced(
SDLMAIN_LIBRARY
SDL_INCLUDE_DIR
SDL_LIBRARY
SDL_LIBRARY_TEMP
)
cmake: added FindOpenJPEG module.
2011-06-19 07:46:24 +00:00
# unset(SDLMAIN_LIBRARY CACHE)
if(NOT SDL_FOUND)
set(WITH_SDL OFF)
endif()
endif()
use lowercase for cmake builtin names and macros, remove contents in else() and endif() which is no longer needed.
2010-12-08 08:43:06 +00:00
if(WITH_JACK)
cmake: add find jack module
2011-06-19 15:03:50 +00:00
find_package(Jack)
if(NOT JACK_FOUND)
set(WITH_JACK OFF)
endif()
use lowercase for cmake builtin names and macros, remove contents in else() and endif() which is no longer needed.
2010-12-08 08:43:06 +00:00
endif()
cmake: added FindOpenJPEG module.
2011-06-19 07:46:24 +00:00
# Codecs
use lowercase for cmake builtin names and macros, remove contents in else() and endif() which is no longer needed.
2010-12-08 08:43:06 +00:00
if(WITH_CODEC_SNDFILE)
added FindSndFile cmake module to replace inline checks.
2011-06-18 12:12:19 +00:00
find_package(SndFile)
if(NOT SNDFILE_FOUND)
set(WITH_CODEC_SNDFILE OFF)
endif()
use lowercase for cmake builtin names and macros, remove contents in else() and endif() which is no longer needed.
2010-12-08 08:43:06 +00:00
endif()
cmake: added FindOpenJPEG module.
2011-06-19 07:46:24 +00:00
if(WITH_CODEC_FFMPEG)
CMake/Scons: automatically use ffmpeg, boost and openimageio from the svn lib/ directory if available, which should make building with ffmpeg and cycles easier. If this folder is not available or another path is specified in user-config.py or CMakeCache.txt, this should have no effect. Wiki build instructions now show how to use these. http://wiki.blender.org/index.php/Dev:2.5/Doc/Building_Blender/Linux
2011-11-11 14:52:24 +00:00
# use lib dir if available and nothing else specified
if(LIBDIR AND NOT FFMPEG)
set(FFMPEG ${LIBDIR}/ffmpeg CACHE PATH "FFMPEG Directory")
../lib/linux wont built with theoraenc theoradec unbuntu user also complained that this failed to link. Im not sure whats best default here, removing for now. if it gives more problems we could have a FindTheora module.
2012-01-12 15:56:08 +00:00
# XXX, some distros might need 'theoraenc theoradec' too
set(FFMPEG_LIBRARIES avformat avcodec avutil avdevice swscale dirac_encoder mp3lame ogg orc-0.4 schroedinger-1.0 theora vorbis vorbisenc vpx x264 xvidcore faad asound CACHE STRING "FFMPEG Libraries")
CMake/Scons: automatically use ffmpeg, boost and openimageio from the svn lib/ directory if available, which should make building with ffmpeg and cycles easier. If this folder is not available or another path is specified in user-config.py or CMakeCache.txt, this should have no effect. Wiki build instructions now show how to use these. http://wiki.blender.org/index.php/Dev:2.5/Doc/Building_Blender/Linux
2011-11-11 14:52:24 +00:00
else()
set(FFMPEG /usr CACHE PATH "FFMPEG Directory")
set(FFMPEG_LIBRARIES avformat avcodec avutil avdevice swscale CACHE STRING "FFMPEG Libraries")
endif()
cmake: added FindOpenJPEG module.
2011-06-19 07:46:24 +00:00
mark_as_advanced(FFMPEG)
Patch #31563: Additional include directory for FFMPEG Fedora 16 is still using /usr/include/ffmpeg, not /usr/include to store FFmpeg's headers. Added it to search paths. Also remove FFmpeg include directory listed in FFMPEG_INCLUDE_DIRS twice Patch by Arno Mayrhofer (aka azrael3000), thanks!
2012-05-27 13:44:21 +00:00
set(FFMPEG_INCLUDE_DIRS ${FFMPEG}/include ${FFMPEG}/include/ffmpeg)
cmake: added FindOpenJPEG module.
2011-06-19 07:46:24 +00:00
mark_as_advanced(FFMPEG_LIBRARIES)
set(FFMPEG_LIBPATH ${FFMPEG}/lib)
set(CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} -D__STDC_CONSTANT_MACROS")
endif()
use lowercase for cmake builtin names and macros, remove contents in else() and endif() which is no longer needed.
2010-12-08 08:43:06 +00:00
if(WITH_INTERNATIONAL)
find_library(INTL_LIBRARY
minor changes to cmake, main noticable change is to disable RULE_MESSAGES which gives less output with makefiles (easier to spot warnings).
2010-06-07 14:28:37 +00:00
NAMES intl
PATHS
/sw/lib
)
use lowercase for cmake builtin names and macros, remove contents in else() and endif() which is no longer needed.
2010-12-08 08:43:06 +00:00
find_library(ICONV_LIBRARY
minor changes to cmake, main noticable change is to disable RULE_MESSAGES which gives less output with makefiles (easier to spot warnings).
2010-06-07 14:28:37 +00:00
NAMES iconv
PATHS
/sw/lib
)
formatting edits only
2011-09-30 15:51:58 +00:00
mark_as_advanced(
ICONV_LIBRARY
INTL_LIBRARY
)
minor changes to cmake, main noticable change is to disable RULE_MESSAGES which gives less output with makefiles (easier to spot warnings).
2010-06-07 14:28:37 +00:00
use lowercase for cmake builtin names and macros, remove contents in else() and endif() which is no longer needed.
2010-12-08 08:43:06 +00:00
if(INTL_LIBRARY AND ICONV_LIBRARY)
cmake: - fix for cmake's SSE detection which would fail because of strict warnings and also had redundant cache setting. - was incorrectly initializing variables (own bad) - python was searching for libs on every run, now only do this if there not cached.
2011-10-01 19:52:33 +00:00
set(GETTEXT_LIBRARIES ${INTL_LIBRARY} ${ICONV_LIBRARY})
use lowercase for cmake builtin names and macros, remove contents in else() and endif() which is no longer needed.
2010-12-08 08:43:06 +00:00
endif()
endif()
white space commit. (2 spaces -> tab). Was annoying to use a different editor for cmake only. theeth says this should be ok with gsoc and merges from branches.
2009-09-06 01:51:23 +00:00
use lowercase for cmake builtin names and macros, remove contents in else() and endif() which is no longer needed.
2010-12-08 08:43:06 +00:00
if(WITH_FFTW3)
cmake add module for finding fftw3. also allow debug blender to build with non debug python
2011-06-19 08:57:34 +00:00
find_package(Fftw3)
if(NOT FFTW3_FOUND)
set(WITH_FFTW3 OFF)
endif()
use lowercase for cmake builtin names and macros, remove contents in else() and endif() which is no longer needed.
2010-12-08 08:43:06 +00:00
endif()
if(WITH_OPENCOLLADA)
opencollada find module. hopefully solves the problem where includes can in an `/include` subdir or not.
2011-08-24 16:04:35 +00:00
find_package(OpenCOLLADA)
if(OPENCOLLADA_FOUND)
patch from Uncle_Entity on IRC for fedora/collada
2011-09-08 03:57:11 +00:00
find_package(XML2)
find_package(PCRE)
opencollada find module. hopefully solves the problem where includes can in an `/include` subdir or not.
2011-08-24 16:04:35 +00:00
else()
set(WITH_OPENCOLLADA OFF)
endif()
use lowercase for cmake builtin names and macros, remove contents in else() and endif() which is no longer needed.
2010-12-08 08:43:06 +00:00
endif()
option to link with jemalloc on *nix, off by default.
2011-05-12 11:16:32 +00:00
if(WITH_MEM_JEMALLOC)
cmake: add find jemalloc module
2011-06-19 14:55:51 +00:00
find_package(JeMalloc)
if(NOT JEMALLOC_FOUND)
set(WITH_MEM_JEMALLOC OFF)
endif()
option to link with jemalloc on *nix, off by default.
2011-05-12 11:16:32 +00:00
endif()
NDOF related edits - fix for building without NDOF on X11 - quiet some warnings
2011-08-02 05:52:27 +00:00
if (WITH_INPUT_NDOF)
more cmake/x11 edits - added includes for spnav - added FindSpacenav.cmake which allows using spacenav from a nonstandard path. - remove NDOF_LIBPATH, use a full library path instead.
2011-08-02 06:32:53 +00:00
find_package(Spacenav)
if(NOT SPACENAV_FOUND)
set(WITH_INPUT_NDOF OFF)
endif()
# use generic names within blenders buildsystem.
if(SPACENAV_FOUND)
set(NDOF_INCLUDE_DIRS ${SPACENAV_INCLUDE_DIRS})
set(NDOF_LIBRARIES ${SPACENAV_LIBRARIES})
first attempt at CMake fix (untested)
2011-06-27 23:24:24 +00:00
endif()
endif()
CMake: Boost and OpenImageIO building support (unused still).
2011-11-07 15:44:09 +00:00
if(WITH_BOOST)
Cycles: cmake tweaks for linux build, instructions on the wiki no longer worked.
2011-11-08 21:40:08 +00:00
# uses in build instructions to override include and library variables
if(NOT BOOST_CUSTOM)
Cycles: more linux build system tweaks, attempting to avoid using boost system libraries by default if we have a lib/ directory.
2011-11-11 20:57:00 +00:00
# use lib dir if available and nothing else specified
if(LIBDIR AND NOT BOOST_ROOT)
set(BOOST_ROOT ${LIBDIR}/boost)
set(Boost_USE_MULTITHREADED OFF)
else()
set(Boost_USE_MULTITHREADED ON)
endif()
Cycles: cmake tweaks for linux build, instructions on the wiki no longer worked.
2011-11-08 21:40:08 +00:00
find_package(Boost 1.34 COMPONENTS filesystem regex system thread)
presets now work from non-redo popups, ended up having to add a new pointer into the uiBlock (which I'd rather have avoided), but setting the uiLayoutSetContextPointer(..) was complicated to properly use for submenus and popus.
2011-11-10 03:44:50 +00:00
mark_as_advanced(Boost_DIR) # why doesnt boost do this?
Cycles: cmake tweaks for linux build, instructions on the wiki no longer worked.
2011-11-08 21:40:08 +00:00
endif()
CMake: Boost and OpenImageIO building support (unused still).
2011-11-07 15:44:09 +00:00
set(BOOST_INCLUDE_DIR ${Boost_INCLUDE_DIRS})
set(BOOST_LIBRARIES ${Boost_LIBRARIES})
set(BOOST_LIBPATH ${Boost_LIBRARY_DIRS})
set(BOOST_DEFINITIONS "-DBOOST_ALL_NO_LIB")
endif()
if(WITH_OPENIMAGEIO)
CMake/Scons: automatically use ffmpeg, boost and openimageio from the svn lib/ directory if available, which should make building with ffmpeg and cycles easier. If this folder is not available or another path is specified in user-config.py or CMakeCache.txt, this should have no effect. Wiki build instructions now show how to use these. http://wiki.blender.org/index.php/Dev:2.5/Doc/Building_Blender/Linux
2011-11-11 14:52:24 +00:00
# use lib dir if available and nothing else specified
if(LIBDIR AND NOT OPENIMAGEIO_ROOT_DIR)
Cycles: fix wrong openimageio path for lib/ directory.
2011-11-11 19:20:52 +00:00
set(OPENIMAGEIO_ROOT_DIR ${LIBDIR}/oiio)
CMake/Scons: automatically use ffmpeg, boost and openimageio from the svn lib/ directory if available, which should make building with ffmpeg and cycles easier. If this folder is not available or another path is specified in user-config.py or CMakeCache.txt, this should have no effect. Wiki build instructions now show how to use these. http://wiki.blender.org/index.php/Dev:2.5/Doc/Building_Blender/Linux
2011-11-11 14:52:24 +00:00
endif()
Cycles Merge Documentation: http://wiki.blender.org/index.php/Dev:2.6/Source/Render/Cycles http://wiki.blender.org/index.php/Doc:2.6/Manual/Render/Cycles Cycles is available is an extra render engine from the top header. It's not feature complete, consider this as a first preview release. Known bugs: http://wiki.blender.org/index.php/Dev:2.6/Source/Render/Cycles/KnownIssues Building currently only works with CMake, SCons support is being worked on and should be available soon. Also missing still is precompiled OpenImageIO and Boost for Linux, these will be added later in lib/linux*, if you do not have these installed on your system, Cycles will simply not be available.
2011-11-08 17:00:40 +00:00
find_package(OpenImageIO)
CMake: Boost and OpenImageIO building support (unused still).
2011-11-07 15:44:09 +00:00
only use tiff/exr when enabled.
2012-06-04 22:34:28 +00:00
set(OPENIMAGEIO_LIBRARIES ${OPENIMAGEIO_LIBRARIES} ${PNG_LIBRARIES} ${JPEG_LIBRARIES} ${ZLIB_LIBRARIES} ${BOOST_LIBRARIES})
CMake: Boost and OpenImageIO building support (unused still).
2011-11-07 15:44:09 +00:00
set(OPENIMAGEIO_LIBPATH) # TODO, remove and reference the absolute path everywhere
set(OPENIMAGEIO_DEFINITIONS)
only use tiff/exr when enabled.
2012-06-04 22:34:28 +00:00
if(WITH_IMAGE_TIFF)
correction to own change with cmake, oiio linking.
2012-06-05 06:18:31 +00:00
list(APPEND OPENIMAGEIO_LIBRARIES "${TIFF_LIBRARY}")
only use tiff/exr when enabled.
2012-06-04 22:34:28 +00:00
endif()
if(WITH_IMAGE_OPENEXR)
correction to own change with cmake, oiio linking.
2012-06-05 06:18:31 +00:00
list(APPEND OPENIMAGEIO_LIBRARIES "${OPENEXR_LIBRARIES}")
only use tiff/exr when enabled.
2012-06-04 22:34:28 +00:00
endif()
CMake: Boost and OpenImageIO building support (unused still).
2011-11-07 15:44:09 +00:00
if(NOT OPENIMAGEIO_FOUND)
set(WITH_OPENIMAGEIO OFF)
Cycles Merge Documentation: http://wiki.blender.org/index.php/Dev:2.6/Source/Render/Cycles http://wiki.blender.org/index.php/Doc:2.6/Manual/Render/Cycles Cycles is available is an extra render engine from the top header. It's not feature complete, consider this as a first preview release. Known bugs: http://wiki.blender.org/index.php/Dev:2.6/Source/Render/Cycles/KnownIssues Building currently only works with CMake, SCons support is being worked on and should be available soon. Also missing still is precompiled OpenImageIO and Boost for Linux, these will be added later in lib/linux*, if you do not have these installed on your system, Cycles will simply not be available.
2011-11-08 17:00:40 +00:00
message(STATUS "OpenImageIO not found, disabling WITH_CYCLES")
CMake: Boost and OpenImageIO building support (unused still).
2011-11-07 15:44:09 +00:00
endif()
endif()
revert r32284, turns out OpenSuse needs this for forkpty(), also fixed missing import with 3ds export.
2010-10-04 11:42:39 +00:00
# OpenSuse needs lutil, ArchLinux not, for now keep, can avoid by using --as-needed
cleanup for cmake msvc build options, reference some libs directly, fix conflicting flags /Ob1 and /Zi for debug
2011-06-28 02:49:49 +00:00
set(PLATFORM_LINKLIBS "-lutil -lc -lm -lpthread -lstdc++")
CMake option 'WITH_HEADLESS' to build blender in headless mode (no x11/xlib) with NULL ghost classe.
2011-06-04 14:12:55 +00:00
- don't build ghost's event printer unless ghost debug is enabled. - use char rather then STR_String for the event printer. - added option to build WITH_GHOST_DEBUG for cmake - renamed WITH_SDL_GHOST --> WITH_GHOST_SDL
2011-07-13 06:04:54 +00:00
if((NOT WITH_HEADLESS) AND (NOT WITH_GHOST_SDL))
CMake option 'WITH_HEADLESS' to build blender in headless mode (no x11/xlib) with NULL ghost classe.
2011-06-04 14:12:55 +00:00
find_package(X11 REQUIRED)
find_path(X11_XF86keysym_INCLUDE_PATH X11/XF86keysym.h ${X11_INC_SEARCH_PATH})
mark_as_advanced(X11_XF86keysym_INCLUDE_PATH)
add cmake option to build without xinput (tablet support)
2011-03-25 04:56:48 +00:00
minor changes, dont append with cmake platform flags which is a string and use enum values rather then ints in a few places.
2011-09-30 15:22:13 +00:00
set(PLATFORM_LINKLIBS "${PLATFORM_LINKLIBS} ${X11_X11_LIB}")
CMake option 'WITH_HEADLESS' to build blender in headless mode (no x11/xlib) with NULL ghost classe.
2011-06-04 14:12:55 +00:00
if(WITH_X11_XINPUT)
minor changes, dont append with cmake platform flags which is a string and use enum values rather then ints in a few places.
2011-09-30 15:22:13 +00:00
set(PLATFORM_LINKLIBS "${PLATFORM_LINKLIBS} ${X11_Xinput_LIB}")
CMake option 'WITH_HEADLESS' to build blender in headless mode (no x11/xlib) with NULL ghost classe.
2011-06-04 14:12:55 +00:00
endif()
Mode switching for GHOST under X11: adds the ability to change screen resolutions in the blenderplayer on GNU/Linux. Code ported from Quake 2.
2012-01-02 12:25:14 +00:00
if(WITH_X11_XF86VMODE)
# XXX, why dont cmake make this available?
FIND_LIBRARY(X11_Xxf86vmode_LIB Xxf86vm ${X11_LIB_SEARCH_PATH})
mark_as_advanced(X11_Xxf86vmode_LIB)
if(X11_Xxf86vmode_LIB)
set(PLATFORM_LINKLIBS "${PLATFORM_LINKLIBS} ${X11_Xxf86vmode_LIB}")
else()
set(WITH_X11_XF86VMODE OFF)
endif()
endif()
add cmake option to build without xinput (tablet support)
2011-03-25 04:56:48 +00:00
endif()
Merge from trunk -r 22040:23000.
2009-10-19 16:20:12 +00:00
use lowercase for cmake builtin names and macros, remove contents in else() and endif() which is no longer needed.
2010-12-08 08:43:06 +00:00
if(CMAKE_SYSTEM_NAME MATCHES "Linux")
build python module without binreloc, add dummy argv[0] to initialize bprogname.
2011-02-21 13:13:08 +00:00
if(NOT WITH_PYTHON_MODULE)
# BSD's dont use libdl.so
minor changes, dont append with cmake platform flags which is a string and use enum values rather then ints in a few places.
2011-09-30 15:22:13 +00:00
set(PLATFORM_LINKLIBS "${PLATFORM_LINKLIBS} -ldl")
build python module without binreloc, add dummy argv[0] to initialize bprogname.
2011-02-21 13:13:08 +00:00
# binreloc is linux only
rename cmake include/libraries to conform with suggested cmake names
2011-06-18 14:12:54 +00:00
set(BINRELOC_INCLUDE_DIRS ${CMAKE_SOURCE_DIR}/extern/binreloc/include)
build python module without binreloc, add dummy argv[0] to initialize bprogname.
2011-02-21 13:13:08 +00:00
set(WITH_BINRELOC ON)
endif()
use lowercase for cmake builtin names and macros, remove contents in else() and endif() which is no longer needed.
2010-12-08 08:43:06 +00:00
endif()
CMake lists initial submission. Documentationand further verification for different platforms will follow soon. This was just tested against current CVS on MSVC 2005 with Verse, QuickTime, OpenEXR, Player all on.
2006-11-17 02:27:12 +00:00
use lowercase for cmake builtin names and macros, remove contents in else() and endif() which is no longer needed.
2010-12-08 08:43:06 +00:00
set(PLATFORM_LINKFLAGS "-pthread")
CMake lists initial submission. Documentationand further verification for different platforms will follow soon. This was just tested against current CVS on MSVC 2005 with Verse, QuickTime, OpenEXR, Player all on.
2006-11-17 02:27:12 +00:00
cmake - set configuration specific defines globally rather than mixing in with c/cxx flags
2011-10-26 00:51:29 +00:00
# lfs on glibc, all compilers should use
add_definitions(-D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -D_LARGEFILE64_SOURCE)
Added better gcc warnings in Cmake.
2009-01-14 16:40:11 +00:00
patch from Dan Eicher to support intel C++ compiler for CMake on *nix.
2010-11-15 05:32:49 +00:00
# GNU Compiler
use lowercase for cmake builtin names and macros, remove contents in else() and endif() which is no longer needed.
2010-12-08 08:43:06 +00:00
if(CMAKE_COMPILER_IS_GNUCC)
set(PLATFORM_CFLAGS "-pipe -fPIC -funsigned-char -fno-strict-aliasing")
new cmake doesn't consider CLang == GNUCC, set flags for clang explicitly.
2011-08-21 11:06:49 +00:00
# CLang is the same as GCC for now.
elseif(CMAKE_CXX_COMPILER_ID MATCHES "Clang")
set(PLATFORM_CFLAGS "-pipe -fPIC -funsigned-char -fno-strict-aliasing")
Some small fixes to get things compiling on solaris with cmake. There are also some changes that need to be done to libmv but I'm leaving those out so I can get it patched upstream first. (Only works with gcc/g++ if we want to use sun's compiler we would need to get rid of all of our annonymous structs which I don't think we want to do at this point, example: typedef struct wmNDOFMotionData { union { float tvec[3]; // translation struct { float tx, ty, tz; }; // this would need to be fixed // something like this or something similar: struct { float x, y, z; } t; }; ... ) Kent
2012-01-12 16:31:27 +00:00
# Solaris CC
elseif(CMAKE_CXX_COMPILER_ID MATCHES "SunPro")
set(PLATFORM_CFLAGS "-pipe -features=extensions -fPIC -D__FUNCTION__=__func__")
patch from Dan Eicher to support intel C++ compiler for CMake on *nix.
2010-11-15 05:32:49 +00:00
# Intel C++ Compiler
use lowercase for cmake builtin names and macros, remove contents in else() and endif() which is no longer needed.
2010-12-08 08:43:06 +00:00
elseif(CMAKE_C_COMPILER_ID MATCHES "Intel")
patch from Dan Eicher to support intel C++ compiler for CMake on *nix.
2010-11-15 05:32:49 +00:00
# think these next two are broken
formatting edits only
2011-09-30 15:51:58 +00:00
find_program(XIAR xiar)
if(XIAR)
use lowercase for cmake builtin names and macros, remove contents in else() and endif() which is no longer needed.
2010-12-08 08:43:06 +00:00
set(CMAKE_AR "${XIAR}")
formatting edits only
2011-09-30 15:51:58 +00:00
endif()
use lowercase for cmake builtin names and macros, remove contents in else() and endif() which is no longer needed.
2010-12-08 08:43:06 +00:00
mark_as_advanced(XIAR)
patch from Dan Eicher to support intel C++ compiler for CMake on *nix.
2010-11-15 05:32:49 +00:00
formatting edits only
2011-09-30 15:51:58 +00:00
find_program(XILD xild)
if(XILD)
use lowercase for cmake builtin names and macros, remove contents in else() and endif() which is no longer needed.
2010-12-08 08:43:06 +00:00
set(CMAKE_LINKER "${XILD}")
formatting edits only
2011-09-30 15:51:58 +00:00
endif()
use lowercase for cmake builtin names and macros, remove contents in else() and endif() which is no longer needed.
2010-12-08 08:43:06 +00:00
mark_as_advanced(XILD)
patch from Dan Eicher to support intel C++ compiler for CMake on *nix.
2010-11-15 05:32:49 +00:00
use lowercase for cmake builtin names and macros, remove contents in else() and endif() which is no longer needed.
2010-12-08 08:43:06 +00:00
set(CMAKE_C_FLAGS "${CMAKE_C_FLAGS} -fp-model precise -prec_div -parallel")
set(CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} -fp-model precise -prec_div -parallel")
patch from Dan Eicher to support intel C++ compiler for CMake on *nix.
2010-11-15 05:32:49 +00:00
use lowercase for cmake builtin names and macros, remove contents in else() and endif() which is no longer needed.
2010-12-08 08:43:06 +00:00
# set(PLATFORM_CFLAGS "${PLATFORM_CFLAGS} -diag-enable sc3")
CMake now tests warnings are supported, GCC 4.0 wasn't working because of unsupported warnings. this can work for other compilers too, currently intel and gcc use this.
2010-12-16 09:55:35 +00:00
set(PLATFORM_CFLAGS "-pipe -fPIC -funsigned-char -fno-strict-aliasing")
use lowercase for cmake builtin names and macros, remove contents in else() and endif() which is no longer needed.
2010-12-08 08:43:06 +00:00
set(PLATFORM_LINKFLAGS "${PLATFORM_LINKFLAGS} -static-intel")
endif()
reverting previous commit from Mitchell. His commit went to the trunk instead of the branch :) svn merge -r 29067:29066 https://svn.blender.org/svnroot/bf-blender/trunk/blender
2010-05-29 21:31:57 +00:00
use lowercase for cmake builtin names and macros, remove contents in else() and endif() which is no longer needed.
2010-12-08 08:43:06 +00:00
elseif(WIN32)
CMake lists initial submission. Documentationand further verification for different platforms will follow soon. This was just tested against current CVS on MSVC 2005 with Verse, QuickTime, OpenEXR, Player all on.
2006-11-17 02:27:12 +00:00
white space commit. (2 spaces -> tab). Was annoying to use a different editor for cmake only. theeth says this should be ok with gsoc and merges from branches.
2009-09-06 01:51:23 +00:00
# this file is included anyway when building under Windows with cl.exe
use lowercase for cmake builtin names and macros, remove contents in else() and endif() which is no longer needed.
2010-12-08 08:43:06 +00:00
# include(${CMAKE_ROOT}/Modules/Platform/Windows-cl.cmake)
define NDEBUG for release builds so assert() is disabled.
2010-10-18 12:35:40 +00:00
Update build files to use the new lib locations for MinGW. For builders: you will need to checkout https://svn.blender.org/svnroot/bf-blender/trunk/lib/mingw32/ to build with MinGW past this commit.
2012-04-23 01:11:42 +00:00
if(CMAKE_COMPILER_IS_GNUCC)
set(LIBDIR ${CMAKE_SOURCE_DIR}/../lib/mingw32)
First MinGW-w64 support for cmake has been added. To test I recommend this build: http://sourceforge.net/projects/mingw-w64/files/Toolchains%20targetting%20Win64/Personal%20Builds/ray_linn/GCC-4.7.0-with-ada/mingw-w64-gcc-4.7.0-runtime-2.0.1-static-ada-20120330.7z/download Other builds may also work but due to the constantly changing nature of the compiler this cannot be guaranteed. I often had to change compilers while building the libraries and this one is the one that did the job for most of them. This first support is experimental and considered "advanced". To enable pass -DWITH_MINGW64 during cmake configuration. Also make sure to extract the compiler on C:/MinGW and that MinGW/bin is in your path. To build check out lib/mingw64. Initially the support is lacking until I get every library compiled correctly. For now you should disable WITH_CYCLES(sorry, I know some people are dying to do benchmarks, but still a few libs to go), WITH_IMAGE_OPENEXR, WITH_OPENCOLLADA, WITH_LIBMV and WITH_CODEC_FFMPEG(links but hangs on startup). Still the tools are working, the memory limit is increased and due to the experimental nature of the setup, full optimization with SSE2 is available, which makes the build quite fast. Also the compiler and especially, the linker are way faster than regular MinGW. The wiki docs have also updated. Happy testing!
2012-04-23 20:09:59 +00:00
# Setup 64bit and 64bit windows systems
if(WITH_MINGW64)
message("Set 64 bit compiler for MinGW.")
set(LIBDIR ${CMAKE_SOURCE_DIR}/../lib/mingw64)
endif()
Update build files to use the new lib locations for MinGW. For builders: you will need to checkout https://svn.blender.org/svnroot/bf-blender/trunk/lib/mingw32/ to build with MinGW past this commit.
2012-04-23 01:11:42 +00:00
else()
set(LIBDIR ${CMAKE_SOURCE_DIR}/../lib/windows)
white space commit. (2 spaces -> tab). Was annoying to use a different editor for cmake only. theeth says this should be ok with gsoc and merges from branches.
2009-09-06 01:51:23 +00:00
Update build files to use the new lib locations for MinGW. For builders: you will need to checkout https://svn.blender.org/svnroot/bf-blender/trunk/lib/mingw32/ to build with MinGW past this commit.
2012-04-23 01:11:42 +00:00
# Setup 64bit and 64bit windows systems
if(CMAKE_CL_64)
message("64 bit compiler detected.")
set(LIBDIR ${CMAKE_SOURCE_DIR}/../lib/win64)
endif()
use lowercase for cmake builtin names and macros, remove contents in else() and endif() which is no longer needed.
2010-12-08 08:43:06 +00:00
endif()
Update build files to use the new lib locations for MinGW. For builders: you will need to checkout https://svn.blender.org/svnroot/bf-blender/trunk/lib/mingw32/ to build with MinGW past this commit.
2012-04-23 01:11:42 +00:00
use lowercase for cmake builtin names and macros, remove contents in else() and endif() which is no longer needed.
2010-12-08 08:43:06 +00:00
add_definitions(-DWIN32)
if(WITH_INTERNATIONAL)
set(ICONV ${LIBDIR}/iconv)
rename cmake include/libraries to conform with suggested cmake names
2011-06-18 14:12:54 +00:00
set(ICONV_INCLUDE_DIRS ${ICONV}/include)
set(ICONV_LIBRARIES iconv)
use lowercase for cmake builtin names and macros, remove contents in else() and endif() which is no longer needed.
2010-12-08 08:43:06 +00:00
set(ICONV_LIBPATH ${ICONV}/lib)
endif()
set(JPEG "${LIBDIR}/jpeg")
use cmake defined names for jpeg, png, zlib and python libs, building on *nix with non-standard libjpeg/png/zlib locations was broken. in the case of python this makes it easier to move to find_package(PythonLibs) when 3.x is supported.
2011-01-25 14:43:13 +00:00
set(JPEG_INCLUDE_DIR "${JPEG}/include")
set(JPEG_LIBPATH ${JPEG}/lib) # not cmake defined
use lowercase for cmake builtin names and macros, remove contents in else() and endif() which is no longer needed.
2010-12-08 08:43:06 +00:00
formatting edits only
2011-09-30 15:51:58 +00:00
set(WINTAB_INC ${LIBDIR}/wintab/include)
use lowercase for cmake builtin names and macros, remove contents in else() and endif() which is no longer needed.
2010-12-08 08:43:06 +00:00
if(WITH_OPENAL)
set(OPENAL ${LIBDIR}/openal)
set(OPENAL_INCLUDE_DIR ${OPENAL}/include)
Reverting changes made to build systems when was upgrading OpenAL. Reverting to openal from creative because own builds doesn't deal with 3D sound. Hopefully it wouldn't lead to crashes caused by ffmpeg+openal (for resolving which libraries were updated to openal-soft).
2012-02-17 16:58:34 +00:00
set(OPENAL_LIBRARY wrap_oal)
use lowercase for cmake builtin names and macros, remove contents in else() and endif() which is no longer needed.
2010-12-08 08:43:06 +00:00
set(OPENAL_LIBPATH ${OPENAL}/lib)
endif()
if(WITH_CODEC_SNDFILE)
set(SNDFILE ${LIBDIR}/sndfile)
added FindSndFile cmake module to replace inline checks.
2011-06-18 12:12:19 +00:00
set(SNDFILE_INCLUDE_DIRS ${SNDFILE}/include)
set(SNDFILE_LIBRARIES libsndfile-1)
set(SNDFILE_LIBPATH ${SNDFILE}/lib) # TODO, deprecate
use lowercase for cmake builtin names and macros, remove contents in else() and endif() which is no longer needed.
2010-12-08 08:43:06 +00:00
endif()
if(WITH_SDL)
set(SDL ${LIBDIR}/sdl)
set(SDL_INCLUDE_DIR ${SDL}/include)
set(SDL_LIBRARY SDL)
set(SDL_LIBPATH ${SDL}/lib)
endif()
if(WITH_CODEC_QUICKTIME)
set(QUICKTIME ${LIBDIR}/QTDevWin)
rename cmake include/libraries to conform with suggested cmake names
2011-06-18 14:12:54 +00:00
set(QUICKTIME_INCLUDE_DIRS ${QUICKTIME}/CIncludes)
set(QUICKTIME_LIBRARIES qtmlClient)
use lowercase for cmake builtin names and macros, remove contents in else() and endif() which is no longer needed.
2010-12-08 08:43:06 +00:00
set(QUICKTIME_LIBPATH ${QUICKTIME}/Libraries)
endif()
if(WITH_RAYOPTIMIZATION AND SUPPORT_SSE_BUILD)
add_definitions(-D__SSE__ -D__MMX__)
endif()
if(MSVC)
cleanup msvc build flags, many were included more than once. also make use of C_WARNINGS, CXX_WARNINGS as other platforms do.
2012-04-27 02:29:37 +00:00
set(PLATFORM_LINKLIBS ws2_32 vfw32 winmm kernel32 user32 gdi32 comdlg32 advapi32 shfolder shell32 ole32 oleaut32 uuid)
cleanup for cmake msvc build options, reference some libs directly, fix conflicting flags /Ob1 and /Zi for debug
2011-06-28 02:49:49 +00:00
add_definitions(/D_CRT_NONSTDC_NO_DEPRECATE /D_CRT_SECURE_NO_DEPRECATE /D_SCL_SECURE_NO_DEPRECATE /D_CONSOLE /D_LIB)
cleanup msvc build flags, many were included more than once. also make use of C_WARNINGS, CXX_WARNINGS as other platforms do.
2012-04-27 02:29:37 +00:00
set(CMAKE_CXX_FLAGS "/nologo /J /Gd /EHsc" CACHE STRING "MSVC MT C++ flags " FORCE)
set(CMAKE_C_FLAGS "/nologo /J /Gd" CACHE STRING "MSVC MT C++ flags " FORCE)
use lowercase for cmake builtin names and macros, remove contents in else() and endif() which is no longer needed.
2010-12-08 08:43:06 +00:00
if(CMAKE_CL_64)
cleanup msvc build flags, many were included more than once. also make use of C_WARNINGS, CXX_WARNINGS as other platforms do.
2012-04-27 02:29:37 +00:00
set(CMAKE_CXX_FLAGS_DEBUG "/Od /Gm /RTC1 /MTd /Zi" CACHE STRING "MSVC MT flags " FORCE)
use lowercase for cmake builtin names and macros, remove contents in else() and endif() which is no longer needed.
2010-12-08 08:43:06 +00:00
else()
cleanup msvc build flags, many were included more than once. also make use of C_WARNINGS, CXX_WARNINGS as other platforms do.
2012-04-27 02:29:37 +00:00
set(CMAKE_CXX_FLAGS_DEBUG "/Od /Gm /RTC1 /MTd /ZI" CACHE STRING "MSVC MT flags " FORCE)
use lowercase for cmake builtin names and macros, remove contents in else() and endif() which is no longer needed.
2010-12-08 08:43:06 +00:00
endif()
cleanup msvc build flags, many were included more than once. also make use of C_WARNINGS, CXX_WARNINGS as other platforms do.
2012-04-27 02:29:37 +00:00
set(CMAKE_CXX_FLAGS_RELEASE "/O2 /Ob2 /MT" CACHE STRING "MSVC MT flags " FORCE)
set(CMAKE_CXX_FLAGS_MINSIZEREL "/O1 /Ob1 /MT" CACHE STRING "MSVC MT flags " FORCE)
set(CMAKE_CXX_FLAGS_RELWITHDEBINFO "/O2 /Ob1 /MT /Zi" CACHE STRING "MSVC MT flags " FORCE)
use lowercase for cmake builtin names and macros, remove contents in else() and endif() which is no longer needed.
2010-12-08 08:43:06 +00:00
if(CMAKE_CL_64)
cleanup msvc build flags, many were included more than once. also make use of C_WARNINGS, CXX_WARNINGS as other platforms do.
2012-04-27 02:29:37 +00:00
set(CMAKE_C_FLAGS_DEBUG "/Od /Gm /RTC1 /MTd /Zi" CACHE STRING "MSVC MT flags " FORCE)
use lowercase for cmake builtin names and macros, remove contents in else() and endif() which is no longer needed.
2010-12-08 08:43:06 +00:00
else()
cleanup msvc build flags, many were included more than once. also make use of C_WARNINGS, CXX_WARNINGS as other platforms do.
2012-04-27 02:29:37 +00:00
set(CMAKE_C_FLAGS_DEBUG "/Od /Gm /RTC1 /MTd /ZI" CACHE STRING "MSVC MT flags " FORCE)
use lowercase for cmake builtin names and macros, remove contents in else() and endif() which is no longer needed.
2010-12-08 08:43:06 +00:00
endif()
cleanup msvc build flags, many were included more than once. also make use of C_WARNINGS, CXX_WARNINGS as other platforms do.
2012-04-27 02:29:37 +00:00
set(CMAKE_C_FLAGS_RELEASE "/O2 /Ob2 /MT" CACHE STRING "MSVC MT flags " FORCE)
set(CMAKE_C_FLAGS_MINSIZEREL "/O1 /Ob1 /MT" CACHE STRING "MSVC MT flags " FORCE)
set(CMAKE_C_FLAGS_RELWITHDEBINFO "/O2 /Ob1 /MT /Zi" CACHE STRING "MSVC MT flags " FORCE)
# most msvc warnings are C & C++
Silence warning during DualCon compile: "Node *pointer[0];" gets MSVC compiler all exited and stuff.
2012-04-29 17:02:52 +00:00
set(_WARNINGS "/W3 /wd4018 /wd4244 /wd4305 /wd4800 /wd4181 /wd4065 /wd4267 /we4013 /wd4200")
cleanup msvc build flags, many were included more than once. also make use of C_WARNINGS, CXX_WARNINGS as other platforms do.
2012-04-27 02:29:37 +00:00
set(C_WARNINGS "${_WARNINGS}")
set(CXX_WARNINGS "${_WARNINGS}")
unset(_WARNINGS)
use lowercase for cmake builtin names and macros, remove contents in else() and endif() which is no longer needed.
2010-12-08 08:43:06 +00:00
if(WITH_INTERNATIONAL)
set(GETTEXT ${LIBDIR}/gettext)
cmake: - fix for cmake's SSE detection which would fail because of strict warnings and also had redundant cache setting. - was incorrectly initializing variables (own bad) - python was searching for libs on every run, now only do this if there not cached.
2011-10-01 19:52:33 +00:00
set(GETTEXT_INCLUDE_DIRS ${GETTEXT}/include)
use lowercase for cmake builtin names and macros, remove contents in else() and endif() which is no longer needed.
2010-12-08 08:43:06 +00:00
set(GETTEXT_LIBPATH ${GETTEXT}/lib)
cmake: - fix for cmake's SSE detection which would fail because of strict warnings and also had redundant cache setting. - was incorrectly initializing variables (own bad) - python was searching for libs on every run, now only do this if there not cached.
2011-10-01 19:52:33 +00:00
set(GETTEXT_LIBRARIES gnu_gettext)
use lowercase for cmake builtin names and macros, remove contents in else() and endif() which is no longer needed.
2010-12-08 08:43:06 +00:00
endif()
Fix El Topo: - Library compile errors - 2 Bugs (have been reported to lib owner) - LAPACK for cmake TODO: - Scons is still missing LAPACK lib define - Do other platforms got LAPACK lib?
2012-05-15 11:35:01 +00:00
Fix compile error with cmake + windows (reported by MiikaH)
2012-05-16 12:18:25 +00:00
if(WITH_MOD_CLOTH_ELTOPO)
set(LAPACK ${LIBDIR}/lapack)
# set(LAPACK_INCLUDE_DIR ${LAPACK}/include)
set_lib_path(LAPACK_LIBPATH ${LAPACK}/lib)
set(LAPACK_LIBRARIES
${LIBDIR}/lapack/lib/libf2c.lib
${LIBDIR}/lapack/lib/clapack_nowrap.lib
${LIBDIR}/lapack/lib/BLAS_nowrap.lib
)
endif()
use lowercase for cmake builtin names and macros, remove contents in else() and endif() which is no longer needed.
2010-12-08 08:43:06 +00:00
* Changes for static win32 png libs.
2011-12-19 19:46:07 +00:00
set(PNG_LIBRARIES libpng)
use cmake defined names for jpeg, png, zlib and python libs, building on *nix with non-standard libjpeg/png/zlib locations was broken. in the case of python this makes it easier to move to find_package(PythonLibs) when 3.x is supported.
2011-01-25 14:43:13 +00:00
set(JPEG_LIBRARIES libjpeg)
Fix for cmake for recent mingw png lib move.
2011-12-18 23:32:24 +00:00
set(PNG "${LIBDIR}/png")
set(PNG_INCLUDE_DIR "${PNG}/include")
set(PNG_LIBPATH ${PNG}/lib) # not cmake defined
use lowercase for cmake builtin names and macros, remove contents in else() and endif() which is no longer needed.
2010-12-08 08:43:06 +00:00
cleanup for cmake msvc build options, reference some libs directly, fix conflicting flags /Ob1 and /Zi for debug
2011-06-28 02:49:49 +00:00
set(ZLIB_INCLUDE_DIRS ${LIBDIR}/zlib/include)
use lowercase for cmake builtin names and macros, remove contents in else() and endif() which is no longer needed.
2010-12-08 08:43:06 +00:00
if(CMAKE_CL_64)
cleanup for cmake msvc build options, reference some libs directly, fix conflicting flags /Ob1 and /Zi for debug
2011-06-28 02:49:49 +00:00
set(ZLIB_LIBRARIES ${LIBDIR}/zlib/lib/libz.lib)
use lowercase for cmake builtin names and macros, remove contents in else() and endif() which is no longer needed.
2010-12-08 08:43:06 +00:00
else()
cleanup for cmake msvc build options, reference some libs directly, fix conflicting flags /Ob1 and /Zi for debug
2011-06-28 02:49:49 +00:00
set(ZLIB_LIBRARIES ${LIBDIR}/zlib/lib/zlib.lib)
use lowercase for cmake builtin names and macros, remove contents in else() and endif() which is no longer needed.
2010-12-08 08:43:06 +00:00
endif()
cleanup for cmake msvc build options, reference some libs directly, fix conflicting flags /Ob1 and /Zi for debug
2011-06-28 02:49:49 +00:00
set(PTHREADS_INCLUDE_DIRS ${LIBDIR}/pthreads/include)
set(PTHREADS_LIBRARIES ${LIBDIR}/pthreads/lib/pthreadVC2.lib)
Fix windows cmake build, this line got accidentally removed in variable renaming.
2011-06-29 17:56:32 +00:00
set(FREETYPE ${LIBDIR}/freetype)
cleanup for cmake msvc build options, reference some libs directly, fix conflicting flags /Ob1 and /Zi for debug
2011-06-28 02:49:49 +00:00
set(FREETYPE_INCLUDE_DIRS
own error in recent cmake edits
2011-06-28 16:57:25 +00:00
${LIBDIR}/freetype/include
${LIBDIR}/freetype/include/freetype2
cleanup for cmake msvc build options, reference some libs directly, fix conflicting flags /Ob1 and /Zi for debug
2011-06-28 02:49:49 +00:00
)
set(FREETYPE_LIBRARY ${LIBDIR}/freetype/lib/freetype2ST.lib)
use lowercase for cmake builtin names and macros, remove contents in else() and endif() which is no longer needed.
2010-12-08 08:43:06 +00:00
if(WITH_FFTW3)
set(FFTW3 ${LIBDIR}/fftw3)
rename cmake include/libraries to conform with suggested cmake names
2011-06-18 14:12:54 +00:00
set(FFTW3_LIBRARIES libfftw)
set(FFTW3_INCLUDE_DIRS ${FFTW3}/include)
use lowercase for cmake builtin names and macros, remove contents in else() and endif() which is no longer needed.
2010-12-08 08:43:06 +00:00
set(FFTW3_LIBPATH ${FFTW3}/lib)
endif()
if(WITH_OPENCOLLADA)
opencollada find module. hopefully solves the problem where includes can in an `/include` subdir or not.
2011-08-24 16:04:35 +00:00
set(OPENCOLLADA_INCLUDE_DIRS
${LIBDIR}/opencollada/include/COLLADAStreamWriter/include
${LIBDIR}/opencollada/include/COLLADABaseUtils/include
${LIBDIR}/opencollada/include/COLLADAFramework/include
${LIBDIR}/opencollada/include/COLLADASaxFrameworkLoader/include
formatting edits only
2011-09-30 15:51:58 +00:00
${LIBDIR}/opencollada/include/GeneratedSaxParser/include
cmake: fix for recent break in msvc+collada, also dont cache duplicate python include/library variables.
2011-06-19 13:06:21 +00:00
)
Patch is partially made by Pelle Johnsen. Thanks! This patch enables search for specific libraries for vc2010 using "set_lib_path" macro If *x* library or path exists in lib/win___/vc2010/*x* , vc2010 will use it. If not, compiler will use standard libraries. It can be easily extended to gcc. The function is enabled for: openCollada openExr Python openImageIO The different libraries are needed for different compilers because C++ was used. There is no standard for lib's C++ structure/functions' names. Actual libs will follow
2011-12-30 22:10:48 +00:00
set_lib_path(OPENCOLLADA_LIBPATH "opencollada/lib")
opencollada find module. hopefully solves the problem where includes can in an `/include` subdir or not.
2011-08-24 16:04:35 +00:00
cmake: fix for recent break in msvc+collada, also dont cache duplicate python include/library variables.
2011-06-19 13:06:21 +00:00
set(OPENCOLLADA_LIBRARIES
Patch is partially made by Pelle Johnsen. Thanks! This patch enables search for specific libraries for vc2010 using "set_lib_path" macro If *x* library or path exists in lib/win___/vc2010/*x* , vc2010 will use it. If not, compiler will use standard libraries. It can be easily extended to gcc. The function is enabled for: openCollada openExr Python openImageIO The different libraries are needed for different compilers because C++ was used. There is no standard for lib's C++ structure/functions' names. Actual libs will follow
2011-12-30 22:10:48 +00:00
${OPENCOLLADA_LIBPATH}/OpenCOLLADASaxFrameworkLoader.lib
${OPENCOLLADA_LIBPATH}/OpenCOLLADAFramework.lib
${OPENCOLLADA_LIBPATH}/OpenCOLLADABaseUtils.lib
${OPENCOLLADA_LIBPATH}/OpenCOLLADAStreamWriter.lib
${OPENCOLLADA_LIBPATH}/MathMLSolver.lib
${OPENCOLLADA_LIBPATH}/GeneratedSaxParser.lib
${OPENCOLLADA_LIBPATH}/xml2.lib
${OPENCOLLADA_LIBPATH}/buffer.lib
${OPENCOLLADA_LIBPATH}/ftoa.lib
${OPENCOLLADA_LIBPATH}/UTF.lib
cmake: fix for recent break in msvc+collada, also dont cache duplicate python include/library variables.
2011-06-19 13:06:21 +00:00
)
fix for error linking opencollada on linux.
2011-09-12 13:58:13 +00:00
set(PCRE_LIBRARIES
Patch is partially made by Pelle Johnsen. Thanks! This patch enables search for specific libraries for vc2010 using "set_lib_path" macro If *x* library or path exists in lib/win___/vc2010/*x* , vc2010 will use it. If not, compiler will use standard libraries. It can be easily extended to gcc. The function is enabled for: openCollada openExr Python openImageIO The different libraries are needed for different compilers because C++ was used. There is no standard for lib's C++ structure/functions' names. Actual libs will follow
2011-12-30 22:10:48 +00:00
${OPENCOLLADA_LIBPATH}/pcre.lib
fix for building opencollada + msvc
2011-06-19 14:14:29 +00:00
)
Patch is partially made by Pelle Johnsen. Thanks! This patch enables search for specific libraries for vc2010 using "set_lib_path" macro If *x* library or path exists in lib/win___/vc2010/*x* , vc2010 will use it. If not, compiler will use standard libraries. It can be easily extended to gcc. The function is enabled for: openCollada openExr Python openImageIO The different libraries are needed for different compilers because C++ was used. There is no standard for lib's C++ structure/functions' names. Actual libs will follow
2011-12-30 22:10:48 +00:00
unset(OPENCOLLADA_LIBPATH)
use lowercase for cmake builtin names and macros, remove contents in else() and endif() which is no longer needed.
2010-12-08 08:43:06 +00:00
endif()
cmake: fix for recent break in msvc+collada, also dont cache duplicate python include/library variables.
2011-06-19 13:06:21 +00:00
use lowercase for cmake builtin names and macros, remove contents in else() and endif() which is no longer needed.
2010-12-08 08:43:06 +00:00
if(WITH_CODEC_FFMPEG)
cleanup for cmake msvc build options, reference some libs directly, fix conflicting flags /Ob1 and /Zi for debug
2011-06-28 02:49:49 +00:00
set(FFMPEG_INCLUDE_DIRS
${LIBDIR}/ffmpeg/include
${LIBDIR}/ffmpeg/include/msvc
)
set(FFMPEG_LIBRARIES
FFmpeg library update: - Update scons/cmake rules to use new versions of libs/dlls. - Update rules for buildbot.
2011-08-22 18:49:42 +00:00
${LIBDIR}/ffmpeg/lib/avcodec-53.lib
${LIBDIR}/ffmpeg/lib/avformat-53.lib
${LIBDIR}/ffmpeg/lib/avdevice-53.lib
${LIBDIR}/ffmpeg/lib/avutil-51.lib
${LIBDIR}/ffmpeg/lib/swscale-2.lib
cleanup for cmake msvc build options, reference some libs directly, fix conflicting flags /Ob1 and /Zi for debug
2011-06-28 02:49:49 +00:00
)
use lowercase for cmake builtin names and macros, remove contents in else() and endif() which is no longer needed.
2010-12-08 08:43:06 +00:00
endif()
if(WITH_IMAGE_OPENEXR)
Patch is partially made by Pelle Johnsen. Thanks! This patch enables search for specific libraries for vc2010 using "set_lib_path" macro If *x* library or path exists in lib/win___/vc2010/*x* , vc2010 will use it. If not, compiler will use standard libraries. It can be easily extended to gcc. The function is enabled for: openCollada openExr Python openImageIO The different libraries are needed for different compilers because C++ was used. There is no standard for lib's C++ structure/functions' names. Actual libs will follow
2011-12-30 22:10:48 +00:00
set_lib_path(OPENEXR "openexr")
set_lib_path(OPENEXR_LIBPATH "openexr/lib")
use full library paths for openexr & msvc, also remove unneeded exr includes
2011-06-15 13:54:57 +00:00
set(OPENEXR_LIBRARIES
${OPENEXR_LIBPATH}/Iex.lib
${OPENEXR_LIBPATH}/Half.lib
${OPENEXR_LIBPATH}/IlmImf.lib
${OPENEXR_LIBPATH}/Imath.lib
${OPENEXR_LIBPATH}/IlmThread.lib
)
Patch is partially made by Pelle Johnsen. Thanks! This patch enables search for specific libraries for vc2010 using "set_lib_path" macro If *x* library or path exists in lib/win___/vc2010/*x* , vc2010 will use it. If not, compiler will use standard libraries. It can be easily extended to gcc. The function is enabled for: openCollada openExr Python openImageIO The different libraries are needed for different compilers because C++ was used. There is no standard for lib's C++ structure/functions' names. Actual libs will follow
2011-12-30 22:10:48 +00:00
set_lib_path(OPENEXR_INCUDE "openexr/include")
use full library paths for openexr & msvc, also remove unneeded exr includes
2011-06-15 13:54:57 +00:00
set(OPENEXR_INCLUDE_DIRS
${OPENEXR_INCUDE}
cmake: - fix for cmake's SSE detection which would fail because of strict warnings and also had redundant cache setting. - was incorrectly initializing variables (own bad) - python was searching for libs on every run, now only do this if there not cached.
2011-10-01 19:52:33 +00:00
${OPENEXR_INCUDE}/IlmImf
use full library paths for openexr & msvc, also remove unneeded exr includes
2011-06-15 13:54:57 +00:00
${OPENEXR_INCUDE}/Iex
${OPENEXR_INCUDE}/Imath
)
unset(OPENEXR_INCUDE)
unset(OPENEXR_LIBPATH)
use lowercase for cmake builtin names and macros, remove contents in else() and endif() which is no longer needed.
2010-12-08 08:43:06 +00:00
endif()
if(WITH_IMAGE_TIFF)
cleanup for cmake msvc build options, reference some libs directly, fix conflicting flags /Ob1 and /Zi for debug
2011-06-28 02:49:49 +00:00
set(TIFF_LIBRARY ${LIBDIR}/tiff/lib/libtiff.lib)
set(TIFF_INCLUDE_DIR ${LIBDIR}/tiff/include)
use lowercase for cmake builtin names and macros, remove contents in else() and endif() which is no longer needed.
2010-12-08 08:43:06 +00:00
endif()
if(WITH_JACK)
cleanup for cmake msvc build options, reference some libs directly, fix conflicting flags /Ob1 and /Zi for debug
2011-06-28 02:49:49 +00:00
set(JACK_INCLUDE_DIRS
${LIBDIR}/jack/include/jack
${LIBDIR}/jack/include
)
set(JACK_LIBRARIES ${LIBDIR}/jack/lib/libjack.lib)
use lowercase for cmake builtin names and macros, remove contents in else() and endif() which is no longer needed.
2010-12-08 08:43:06 +00:00
endif()
if(WITH_PYTHON)
print an error message if Python.h can't be found for cmake and scons since its such a common problem.
2011-07-16 06:55:45 +00:00
# normally cached but not since we include them with blender
set(PYTHON_VERSION 3.2) # CACHE STRING)
Patch is partially made by Pelle Johnsen. Thanks! This patch enables search for specific libraries for vc2010 using "set_lib_path" macro If *x* library or path exists in lib/win___/vc2010/*x* , vc2010 will use it. If not, compiler will use standard libraries. It can be easily extended to gcc. The function is enabled for: openCollada openExr Python openImageIO The different libraries are needed for different compilers because C++ was used. There is no standard for lib's C++ structure/functions' names. Actual libs will follow
2011-12-30 22:10:48 +00:00
set_lib_path(PYTHON_INCLUDE_DIR "python/include/python${PYTHON_VERSION}")
set_lib_path(PYTHON_LIBRARY "python/lib/python32.lib") #CACHE FILEPATH)
print an error message if Python.h can't be found for cmake and scons since its such a common problem.
2011-07-16 06:55:45 +00:00
# uncached vars
set(PYTHON_INCLUDE_DIRS "${PYTHON_INCLUDE_DIR}")
set(PYTHON_LIBRARIES "${PYTHON_LIBRARY}")
use lowercase for cmake builtin names and macros, remove contents in else() and endif() which is no longer needed.
2010-12-08 08:43:06 +00:00
endif()
recent fixes for mingw + cmake broke msvc
2010-09-16 07:26:06 +00:00
CMake: Boost and OpenImageIO building support (unused still).
2011-11-07 15:44:09 +00:00
if(WITH_BOOST)
set(BOOST ${LIBDIR}/boost)
set(BOOST_INCLUDE_DIR ${BOOST}/include)
Enables vc 2010 boost libraries for cmake
2011-12-03 01:12:57 +00:00
if(MSVC10)
Cmake / Boost: * Code cleanup
2012-07-04 16:39:34 +00:00
set(BOOST_LIBPATH ${BOOST}/lib/vc_10)
Windows (msvc 2010) is now using Boost 1.49 - Updated cmake file.
2012-07-04 16:10:22 +00:00
set(BOOST_POSTFIX "vc100-mt-s-1_49.lib")
set(BOOST_DEBUG_POSTFIX "vc100-mt-sgd-1_49.lib")
Enables vc 2010 boost libraries for cmake
2011-12-03 01:12:57 +00:00
else()
Cmake / Boost: * Code cleanup
2012-07-04 16:39:34 +00:00
set(BOOST_LIBPATH ${BOOST}/lib)
Cycles / Boost: * Windows (msvc 2008) is now using Boost 1.49 - Updated cmake file.
2012-06-30 18:24:28 +00:00
set(BOOST_POSTFIX "vc90-mt-s-1_49.lib")
set(BOOST_DEBUG_POSTFIX "vc90-mt-sgd-1_49.lib")
Enables vc 2010 boost libraries for cmake
2011-12-03 01:12:57 +00:00
endif()
CMake: Boost and OpenImageIO building support (unused still).
2011-11-07 15:44:09 +00:00
set(BOOST_LIBRARIES
Enables vc 2010 boost libraries for cmake
2011-12-03 01:12:57 +00:00
optimized libboost_date_time-${BOOST_POSTFIX} optimized libboost_filesystem-${BOOST_POSTFIX}
optimized libboost_regex-${BOOST_POSTFIX} optimized libboost_system-${BOOST_POSTFIX} optimized libboost_thread-${BOOST_POSTFIX}
debug libboost_date_time-${BOOST_DEBUG_POSTFIX} debug libboost_filesystem-${BOOST_DEBUG_POSTFIX}
debug libboost_regex-${BOOST_DEBUG_POSTFIX} debug libboost_system-${BOOST_DEBUG_POSTFIX} debug libboost_thread-${BOOST_DEBUG_POSTFIX})
CMake: Boost and OpenImageIO building support (unused still).
2011-11-07 15:44:09 +00:00
set(BOOST_DEFINITIONS "-DBOOST_ALL_NO_LIB")
endif()
if(WITH_OPENIMAGEIO)
set(OPENIMAGEIO ${LIBDIR}/openimageio)
set(OPENIMAGEIO_INCLUDE_DIRS ${OPENIMAGEIO}/include)
set(OPENIMAGEIO_LIBRARIES OpenImageIO)
Patch is partially made by Pelle Johnsen. Thanks! This patch enables search for specific libraries for vc2010 using "set_lib_path" macro If *x* library or path exists in lib/win___/vc2010/*x* , vc2010 will use it. If not, compiler will use standard libraries. It can be easily extended to gcc. The function is enabled for: openCollada openExr Python openImageIO The different libraries are needed for different compilers because C++ was used. There is no standard for lib's C++ structure/functions' names. Actual libs will follow
2011-12-30 22:10:48 +00:00
set_lib_path(OPENIMAGEIO_LIBPATH "openimageio/lib")
CMake: Boost and OpenImageIO building support (unused still).
2011-11-07 15:44:09 +00:00
set(OPENIMAGEIO_DEFINITIONS)
endif()
own change to cmake files broke MSVC2010 with Debug configuration, reported by Alex K
2011-07-01 03:40:12 +00:00
set(PLATFORM_LINKFLAGS "/SUBSYSTEM:CONSOLE /STACK:2097152 /INCREMENTAL:NO /NODEFAULTLIB:msvcrt.lib /NODEFAULTLIB:msvcmrt.lib /NODEFAULTLIB:msvcurt.lib /NODEFAULTLIB:msvcrtd.lib")
cleanup for cmake msvc build options, reference some libs directly, fix conflicting flags /Ob1 and /Zi for debug
2011-06-28 02:49:49 +00:00
[#21842] Beta patch to restore cmake MinGW compilation from Riakiotakis Antonis (psy-fi) with modifications. notes: - needed to remove quotes around filepaths for copying. - WITH_JACK, doesnt link - WITH_FFMPEG, doesnt build - WITH_RAYOPTIMIZATION, gave an error for me. (no mmx support)
2010-05-28 21:25:23 +00:00
# MSVC only, Mingw doesnt need
use lowercase for cmake builtin names and macros, remove contents in else() and endif() which is no longer needed.
2010-12-08 08:43:06 +00:00
if(CMAKE_CL_64)
cleanup for cmake msvc build options, reference some libs directly, fix conflicting flags /Ob1 and /Zi for debug
2011-06-28 02:49:49 +00:00
set(PLATFORM_LINKFLAGS "/MACHINE:X64 /OPT:NOREF ${PLATFORM_LINKFLAGS}")
use lowercase for cmake builtin names and macros, remove contents in else() and endif() which is no longer needed.
2010-12-08 08:43:06 +00:00
else()
cleanup for cmake msvc build options, reference some libs directly, fix conflicting flags /Ob1 and /Zi for debug
2011-06-28 02:49:49 +00:00
set(PLATFORM_LINKFLAGS "/MACHINE:IX86 /LARGEADDRESSAWARE ${PLATFORM_LINKFLAGS}")
use lowercase for cmake builtin names and macros, remove contents in else() and endif() which is no longer needed.
2010-12-08 08:43:06 +00:00
endif()
define NDEBUG for release builds so assert() is disabled.
2010-10-18 12:35:40 +00:00
own change to cmake files broke MSVC2010 with Debug configuration, reported by Alex K
2011-07-01 03:40:12 +00:00
set(PLATFORM_LINKFLAGS_DEBUG "/NODEFAULTLIB:libcmt.lib /NODEFAULTLIB:libc.lib")
[#21842] Beta patch to restore cmake MinGW compilation from Riakiotakis Antonis (psy-fi) with modifications. notes: - needed to remove quotes around filepaths for copying. - WITH_JACK, doesnt link - WITH_FFMPEG, doesnt build - WITH_RAYOPTIMIZATION, gave an error for me. (no mmx support)
2010-05-28 21:25:23 +00:00
rename WholeCharacter in C too, add pthreads include back for msvc which needs it.
2012-04-26 18:18:09 +00:00
# used in many places so include globally, like OpenGL
blender_include_dirs("${PTHREADS_INCLUDE_DIRS}")
Update build files to use the new lib locations for MinGW. For builders: you will need to checkout https://svn.blender.org/svnroot/bf-blender/trunk/lib/mingw32/ to build with MinGW past this commit.
2012-04-23 01:11:42 +00:00
elseif(CMAKE_COMPILER_IS_GNUCC)
First MinGW-w64 support for cmake has been added. To test I recommend this build: http://sourceforge.net/projects/mingw-w64/files/Toolchains%20targetting%20Win64/Personal%20Builds/ray_linn/GCC-4.7.0-with-ada/mingw-w64-gcc-4.7.0-runtime-2.0.1-static-ada-20120330.7z/download Other builds may also work but due to the constantly changing nature of the compiler this cannot be guaranteed. I often had to change compilers while building the libraries and this one is the one that did the job for most of them. This first support is experimental and considered "advanced". To enable pass -DWITH_MINGW64 during cmake configuration. Also make sure to extract the compiler on C:/MinGW and that MinGW/bin is in your path. To build check out lib/mingw64. Initially the support is lacking until I get every library compiled correctly. For now you should disable WITH_CYCLES(sorry, I know some people are dying to do benchmarks, but still a few libs to go), WITH_IMAGE_OPENEXR, WITH_OPENCOLLADA, WITH_LIBMV and WITH_CODEC_FFMPEG(links but hangs on startup). Still the tools are working, the memory limit is increased and due to the experimental nature of the setup, full optimization with SSE2 is available, which makes the build quite fast. Also the compiler and especially, the linker are way faster than regular MinGW. The wiki docs have also updated. Happy testing!
2012-04-23 20:09:59 +00:00
# keep GCC specific stuff here
Update build files to use the new lib locations for MinGW. For builders: you will need to checkout https://svn.blender.org/svnroot/bf-blender/trunk/lib/mingw32/ to build with MinGW past this commit.
2012-04-23 01:11:42 +00:00
set(PLATFORM_LINKLIBS "-lshell32 -lshfolder -lgdi32 -lmsvcrt -lwinmm -lmingw32 -lm -lws2_32 -lz -lstdc++ -lole32 -luuid -lwsock32 -lpsapi")
set(PLATFORM_CFLAGS "-pipe -funsigned-char -fno-strict-aliasing")
First MinGW-w64 support for cmake has been added. To test I recommend this build: http://sourceforge.net/projects/mingw-w64/files/Toolchains%20targetting%20Win64/Personal%20Builds/ray_linn/GCC-4.7.0-with-ada/mingw-w64-gcc-4.7.0-runtime-2.0.1-static-ada-20120330.7z/download Other builds may also work but due to the constantly changing nature of the compiler this cannot be guaranteed. I often had to change compilers while building the libraries and this one is the one that did the job for most of them. This first support is experimental and considered "advanced". To enable pass -DWITH_MINGW64 during cmake configuration. Also make sure to extract the compiler on C:/MinGW and that MinGW/bin is in your path. To build check out lib/mingw64. Initially the support is lacking until I get every library compiled correctly. For now you should disable WITH_CYCLES(sorry, I know some people are dying to do benchmarks, but still a few libs to go), WITH_IMAGE_OPENEXR, WITH_OPENCOLLADA, WITH_LIBMV and WITH_CODEC_FFMPEG(links but hangs on startup). Still the tools are working, the memory limit is increased and due to the experimental nature of the setup, full optimization with SSE2 is available, which makes the build quite fast. Also the compiler and especially, the linker are way faster than regular MinGW. The wiki docs have also updated. Happy testing!
2012-04-23 20:09:59 +00:00
if(WITH_MINGW64)
Cleanup optimization compile flags for mingw-w64. After testing it seems that for safe debug sessions, debug build optimizations need to be off. Also removed sse flags from release flags since they are included in ray optimization flags which are on by default.
2012-05-14 23:36:07 +00:00
#We need to take care though not to have these on debug builds because they may play funky with gdb
if(CMAKE_BUILD_TYPE MATCHES "Release")
set(PLATFORM_CFLAGS "${PLATFORM_CFLAGS} -mmmx -ftree-vectorize")
endif()
revert 45924, not a very clean solution, especially for external libraries and looks like -fpermissive is used in linux too
2012-04-24 16:14:23 +00:00
set(CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} -fpermissive")
Add libMV and Scons support for MinGW-w64, patches by Caleb Joseph with slight modifications. Thanks!
2012-04-24 12:57:58 +00:00
set(PLATFORM_LINKLIBS "${PLATFORM_LINKLIBS} -lpthread")
First MinGW-w64 support for cmake has been added. To test I recommend this build: http://sourceforge.net/projects/mingw-w64/files/Toolchains%20targetting%20Win64/Personal%20Builds/ray_linn/GCC-4.7.0-with-ada/mingw-w64-gcc-4.7.0-runtime-2.0.1-static-ada-20120330.7z/download Other builds may also work but due to the constantly changing nature of the compiler this cannot be guaranteed. I often had to change compilers while building the libraries and this one is the one that did the job for most of them. This first support is experimental and considered "advanced". To enable pass -DWITH_MINGW64 during cmake configuration. Also make sure to extract the compiler on C:/MinGW and that MinGW/bin is in your path. To build check out lib/mingw64. Initially the support is lacking until I get every library compiled correctly. For now you should disable WITH_CYCLES(sorry, I know some people are dying to do benchmarks, but still a few libs to go), WITH_IMAGE_OPENEXR, WITH_OPENCOLLADA, WITH_LIBMV and WITH_CODEC_FFMPEG(links but hangs on startup). Still the tools are working, the memory limit is increased and due to the experimental nature of the setup, full optimization with SSE2 is available, which makes the build quite fast. Also the compiler and especially, the linker are way faster than regular MinGW. The wiki docs have also updated. Happy testing!
2012-04-23 20:09:59 +00:00
add_definitions(-DFREE_WINDOWS64 -DMS_WIN64)
endif()
Update build files to use the new lib locations for MinGW. For builders: you will need to checkout https://svn.blender.org/svnroot/bf-blender/trunk/lib/mingw32/ to build with MinGW past this commit.
2012-04-23 01:11:42 +00:00
add_definitions(-D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -D_LARGEFILE64_SOURCE)
own recent commit broke this python import: from mathutils.geometry import PolyFill I couldn't find a way for python's inittab to do this so just inserting mathutils.geometry into sys.modules manually.
2010-10-31 13:17:39 +00:00
disable forcing mingw compiler flags (means you couldnt change them)
2010-05-29 11:36:33 +00:00
use lowercase for cmake builtin names and macros, remove contents in else() and endif() which is no longer needed.
2010-12-08 08:43:06 +00:00
add_definitions(-DFREE_WINDOWS)
cmake/mingw was missing defines.
2010-10-03 23:27:33 +00:00
use lowercase for cmake builtin names and macros, remove contents in else() and endif() which is no longer needed.
2010-12-08 08:43:06 +00:00
if(WITH_INTERNATIONAL)
Update build files to use the new lib locations for MinGW. For builders: you will need to checkout https://svn.blender.org/svnroot/bf-blender/trunk/lib/mingw32/ to build with MinGW past this commit.
2012-04-23 01:11:42 +00:00
set(GETTEXT ${LIBDIR}/gettext)
cmake: - fix for cmake's SSE detection which would fail because of strict warnings and also had redundant cache setting. - was incorrectly initializing variables (own bad) - python was searching for libs on every run, now only do this if there not cached.
2011-10-01 19:52:33 +00:00
set(GETTEXT_INCLUDE_DIRS ${GETTEXT}/include)
use lowercase for cmake builtin names and macros, remove contents in else() and endif() which is no longer needed.
2010-12-08 08:43:06 +00:00
set(GETTEXT_LIBPATH ${GETTEXT}/lib)
cmake: - fix for cmake's SSE detection which would fail because of strict warnings and also had redundant cache setting. - was incorrectly initializing variables (own bad) - python was searching for libs on every run, now only do this if there not cached.
2011-10-01 19:52:33 +00:00
set(GETTEXT_LIBRARIES intl)
use lowercase for cmake builtin names and macros, remove contents in else() and endif() which is no longer needed.
2010-12-08 08:43:06 +00:00
endif()
Fix for cmake for recent mingw png lib move.
2011-12-18 23:32:24 +00:00
Update build files to use the new lib locations for MinGW. For builders: you will need to checkout https://svn.blender.org/svnroot/bf-blender/trunk/lib/mingw32/ to build with MinGW past this commit.
2012-04-23 01:11:42 +00:00
set(PNG "${LIBDIR}/png")
Fix for cmake for recent mingw png lib move.
2011-12-18 23:32:24 +00:00
set(PNG_INCLUDE_DIR "${PNG}/include")
set(PNG_LIBPATH ${PNG}/lib) # not cmake defined
[#21842] Beta patch to restore cmake MinGW compilation from Riakiotakis Antonis (psy-fi) with modifications. notes: - needed to remove quotes around filepaths for copying. - WITH_JACK, doesnt link - WITH_FFMPEG, doesnt build - WITH_RAYOPTIMIZATION, gave an error for me. (no mmx support)
2010-05-28 21:25:23 +00:00
First MinGW-w64 support for cmake has been added. To test I recommend this build: http://sourceforge.net/projects/mingw-w64/files/Toolchains%20targetting%20Win64/Personal%20Builds/ray_linn/GCC-4.7.0-with-ada/mingw-w64-gcc-4.7.0-runtime-2.0.1-static-ada-20120330.7z/download Other builds may also work but due to the constantly changing nature of the compiler this cannot be guaranteed. I often had to change compilers while building the libraries and this one is the one that did the job for most of them. This first support is experimental and considered "advanced". To enable pass -DWITH_MINGW64 during cmake configuration. Also make sure to extract the compiler on C:/MinGW and that MinGW/bin is in your path. To build check out lib/mingw64. Initially the support is lacking until I get every library compiled correctly. For now you should disable WITH_CYCLES(sorry, I know some people are dying to do benchmarks, but still a few libs to go), WITH_IMAGE_OPENEXR, WITH_OPENCOLLADA, WITH_LIBMV and WITH_CODEC_FFMPEG(links but hangs on startup). Still the tools are working, the memory limit is increased and due to the experimental nature of the setup, full optimization with SSE2 is available, which makes the build quite fast. Also the compiler and especially, the linker are way faster than regular MinGW. The wiki docs have also updated. Happy testing!
2012-04-23 20:09:59 +00:00
if(WITH_MINGW64)
set(JPEG_LIBRARIES jpeg)
else()
set(JPEG_LIBRARIES libjpeg)
endif()
use lowercase for cmake builtin names and macros, remove contents in else() and endif() which is no longer needed.
2010-12-08 08:43:06 +00:00
set(PNG_LIBRARIES png)
[#21842] Beta patch to restore cmake MinGW compilation from Riakiotakis Antonis (psy-fi) with modifications. notes: - needed to remove quotes around filepaths for copying. - WITH_JACK, doesnt link - WITH_FFMPEG, doesnt build - WITH_RAYOPTIMIZATION, gave an error for me. (no mmx support)
2010-05-28 21:25:23 +00:00
use lowercase for cmake builtin names and macros, remove contents in else() and endif() which is no longer needed.
2010-12-08 08:43:06 +00:00
set(ZLIB ${LIBDIR}/zlib)
use cmake defined names for jpeg, png, zlib and python libs, building on *nix with non-standard libjpeg/png/zlib locations was broken. in the case of python this makes it easier to move to find_package(PythonLibs) when 3.x is supported.
2011-01-25 14:43:13 +00:00
set(ZLIB_INCLUDE_DIRS ${ZLIB}/include)
use lowercase for cmake builtin names and macros, remove contents in else() and endif() which is no longer needed.
2010-12-08 08:43:06 +00:00
set(ZLIB_LIBPATH ${ZLIB}/lib)
set(ZLIB_LIBRARIES z)
[#21842] Beta patch to restore cmake MinGW compilation from Riakiotakis Antonis (psy-fi) with modifications. notes: - needed to remove quotes around filepaths for copying. - WITH_JACK, doesnt link - WITH_FFMPEG, doesnt build - WITH_RAYOPTIMIZATION, gave an error for me. (no mmx support)
2010-05-28 21:25:23 +00:00
First MinGW-w64 support for cmake has been added. To test I recommend this build: http://sourceforge.net/projects/mingw-w64/files/Toolchains%20targetting%20Win64/Personal%20Builds/ray_linn/GCC-4.7.0-with-ada/mingw-w64-gcc-4.7.0-runtime-2.0.1-static-ada-20120330.7z/download Other builds may also work but due to the constantly changing nature of the compiler this cannot be guaranteed. I often had to change compilers while building the libraries and this one is the one that did the job for most of them. This first support is experimental and considered "advanced". To enable pass -DWITH_MINGW64 during cmake configuration. Also make sure to extract the compiler on C:/MinGW and that MinGW/bin is in your path. To build check out lib/mingw64. Initially the support is lacking until I get every library compiled correctly. For now you should disable WITH_CYCLES(sorry, I know some people are dying to do benchmarks, but still a few libs to go), WITH_IMAGE_OPENEXR, WITH_OPENCOLLADA, WITH_LIBMV and WITH_CODEC_FFMPEG(links but hangs on startup). Still the tools are working, the memory limit is increased and due to the experimental nature of the setup, full optimization with SSE2 is available, which makes the build quite fast. Also the compiler and especially, the linker are way faster than regular MinGW. The wiki docs have also updated. Happy testing!
2012-04-23 20:09:59 +00:00
#comes with own pthread library
if(NOT WITH_MINGW64)
set(PTHREADS ${LIBDIR}/pthreads)
set(PTHREADS_INCLUDE_DIRS ${PTHREADS}/include)
set(PTHREADS_LIBPATH ${PTHREADS}/lib)
set(PTHREADS_LIBRARIES pthreadGC2)
endif()
Update build files to use the new lib locations for MinGW. For builders: you will need to checkout https://svn.blender.org/svnroot/bf-blender/trunk/lib/mingw32/ to build with MinGW past this commit.
2012-04-23 01:11:42 +00:00
set(FREETYPE ${LIBDIR}/freetype)
use lowercase for cmake builtin names and macros, remove contents in else() and endif() which is no longer needed.
2010-12-08 08:43:06 +00:00
set(FREETYPE_INCLUDE_DIRS ${FREETYPE}/include ${FREETYPE}/include/freetype2)
set(FREETYPE_LIBPATH ${FREETYPE}/lib)
set(FREETYPE_LIBRARY freetype)
if(WITH_FFTW3)
Update build files to use the new lib locations for MinGW. For builders: you will need to checkout https://svn.blender.org/svnroot/bf-blender/trunk/lib/mingw32/ to build with MinGW past this commit.
2012-04-23 01:11:42 +00:00
set(FFTW3 ${LIBDIR}/fftw3)
rename cmake include/libraries to conform with suggested cmake names
2011-06-18 14:12:54 +00:00
set(FFTW3_LIBRARIES fftw3)
set(FFTW3_INCLUDE_DIRS ${FFTW3}/include)
use lowercase for cmake builtin names and macros, remove contents in else() and endif() which is no longer needed.
2010-12-08 08:43:06 +00:00
set(FFTW3_LIBPATH ${FFTW3}/lib)
endif()
if(WITH_OPENCOLLADA)
Update build files to use the new lib locations for MinGW. For builders: you will need to checkout https://svn.blender.org/svnroot/bf-blender/trunk/lib/mingw32/ to build with MinGW past this commit.
2012-04-23 01:11:42 +00:00
set(OPENCOLLADA ${LIBDIR}/opencollada)
opencollada find module. hopefully solves the problem where includes can in an `/include` subdir or not.
2011-08-24 16:04:35 +00:00
set(OPENCOLLADA_INCLUDE_DIRS
Update build files to use the new lib locations for MinGW. For builders: you will need to checkout https://svn.blender.org/svnroot/bf-blender/trunk/lib/mingw32/ to build with MinGW past this commit.
2012-04-23 01:11:42 +00:00
${LIBDIR}/opencollada/include/COLLADAStreamWriter/include
${LIBDIR}/opencollada/include/COLLADABaseUtils/include
${LIBDIR}/opencollada/include/COLLADAFramework/include
${LIBDIR}/opencollada/include/COLLADASaxFrameworkLoader/include
${LIBDIR}/opencollada/include/GeneratedSaxParser/include
opencollada find module. hopefully solves the problem where includes can in an `/include` subdir or not.
2011-08-24 16:04:35 +00:00
)
use lowercase for cmake builtin names and macros, remove contents in else() and endif() which is no longer needed.
2010-12-08 08:43:06 +00:00
set(OPENCOLLADA_LIBPATH ${OPENCOLLADA}/lib ${OPENCOLLADA}/lib)
Fix own mistake: Open Collada libs are different for MinGW/MinGW64
2012-05-17 08:42:22 +00:00
if(WITH_MINGW64)
set(OPENCOLLADA_LIBRARIES OpenCOLLADAStreamWriter OpenCOLLADASaxFrameworkLoader OpenCOLLADAFramework OpenCOLLADABaseUtils GeneratedSaxParser UTF MathMLSolver pcre buffer ftoa xml)
else()
set(OPENCOLLADA_LIBRARIES OpenCOLLADAStreamWriter OpenCOLLADASaxFrameworkLoader OpenCOLLADAFramework OpenCOLLADABaseUtils GeneratedSaxParser UTF MathMLSolver expat pcre buffer ftoa)
endif()
fix for error linking opencollada on linux.
2011-09-12 13:58:13 +00:00
set(PCRE_LIBRARIES pcre)
use lowercase for cmake builtin names and macros, remove contents in else() and endif() which is no longer needed.
2010-12-08 08:43:06 +00:00
endif()
formatting edits only
2011-09-30 15:51:58 +00:00
use lowercase for cmake builtin names and macros, remove contents in else() and endif() which is no longer needed.
2010-12-08 08:43:06 +00:00
if(WITH_CODEC_FFMPEG)
set(FFMPEG ${LIBDIR}/ffmpeg)
Patch #31563: Additional include directory for FFMPEG Fedora 16 is still using /usr/include/ffmpeg, not /usr/include to store FFmpeg's headers. Added it to search paths. Also remove FFmpeg include directory listed in FFMPEG_INCLUDE_DIRS twice Patch by Arno Mayrhofer (aka azrael3000), thanks!
2012-05-27 13:44:21 +00:00
set(FFMPEG_INCLUDE_DIRS ${FFMPEG}/include)
Enable ffmpeg building with MinGW-w64. The libraries were compiled with gcc 4.7, however is has been claimed there are issues with gcc > 4.4 so this is for testing purposes. Still it doesn't crash on startup anymore. Forgot to mention on ffmpeg lib commit that committed ffmpeg version is 0.10.2
2012-05-10 11:37:41 +00:00
if(WITH_MINGW64)
set(FFMPEG_LIBRARIES avcodec.dll avformat.dll avdevice.dll avutil.dll swscale.dll swresample.dll)
else()
set(FFMPEG_LIBRARIES avcodec-53 avformat-53 avdevice-53 avutil-51 swscale-2)
endif()
use lowercase for cmake builtin names and macros, remove contents in else() and endif() which is no longer needed.
2010-12-08 08:43:06 +00:00
set(FFMPEG_LIBPATH ${FFMPEG}/lib)
endif()
if(WITH_IMAGE_OPENEXR)
Update build files to use the new lib locations for MinGW. For builders: you will need to checkout https://svn.blender.org/svnroot/bf-blender/trunk/lib/mingw32/ to build with MinGW past this commit.
2012-04-23 01:11:42 +00:00
set(OPENEXR ${LIBDIR}/openexr)
use full library paths for openexr & msvc, also remove unneeded exr includes
2011-06-15 13:54:57 +00:00
set(OPENEXR_INCLUDE_DIRS ${OPENEXR}/include/OpenEXR)
-OpenEXR fixed so enabling if user has enabled -Added Iex to lib list, was causing link time errors
2011-07-10 20:04:56 +00:00
set(OPENEXR_LIBRARIES Half IlmImf Imath IlmThread Iex)
use lowercase for cmake builtin names and macros, remove contents in else() and endif() which is no longer needed.
2010-12-08 08:43:06 +00:00
set(OPENEXR_LIBPATH ${OPENEXR}/lib)
endif()
if(WITH_IMAGE_TIFF)
Update build files to use the new lib locations for MinGW. For builders: you will need to checkout https://svn.blender.org/svnroot/bf-blender/trunk/lib/mingw32/ to build with MinGW past this commit.
2012-04-23 01:11:42 +00:00
set(TIFF ${LIBDIR}/tiff)
use lowercase for cmake builtin names and macros, remove contents in else() and endif() which is no longer needed.
2010-12-08 08:43:06 +00:00
set(TIFF_LIBRARY tiff)
set(TIFF_INCLUDE_DIR ${TIFF}/include)
set(TIFF_LIBPATH ${TIFF}/lib)
endif()
if(WITH_JACK)
set(JACK ${LIBDIR}/jack)
rename cmake include/libraries to conform with suggested cmake names
2011-06-18 14:12:54 +00:00
set(JACK_INCLUDE_DIRS ${JACK}/include/jack ${JACK}/include)
set(JACK_LIBRARIES jack)
use lowercase for cmake builtin names and macros, remove contents in else() and endif() which is no longer needed.
2010-12-08 08:43:06 +00:00
set(JACK_LIBPATH ${JACK}/lib)
formatting edits only
2011-09-30 15:51:58 +00:00
[#21842] Beta patch to restore cmake MinGW compilation from Riakiotakis Antonis (psy-fi) with modifications. notes: - needed to remove quotes around filepaths for copying. - WITH_JACK, doesnt link - WITH_FFMPEG, doesnt build - WITH_RAYOPTIMIZATION, gave an error for me. (no mmx support)
2010-05-28 21:25:23 +00:00
# TODO, gives linking errors, force off
use lowercase for cmake builtin names and macros, remove contents in else() and endif() which is no longer needed.
2010-12-08 08:43:06 +00:00
set(WITH_JACK OFF)
endif()
[#21842] Beta patch to restore cmake MinGW compilation from Riakiotakis Antonis (psy-fi) with modifications. notes: - needed to remove quotes around filepaths for copying. - WITH_JACK, doesnt link - WITH_FFMPEG, doesnt build - WITH_RAYOPTIMIZATION, gave an error for me. (no mmx support)
2010-05-28 21:25:23 +00:00
use lowercase for cmake builtin names and macros, remove contents in else() and endif() which is no longer needed.
2010-12-08 08:43:06 +00:00
if(WITH_PYTHON)
print an error message if Python.h can't be found for cmake and scons since its such a common problem.
2011-07-16 06:55:45 +00:00
# normally cached but not since we include them with blender
set(PYTHON_VERSION 3.2) # CACHE STRING)
set(PYTHON_INCLUDE_DIR "${LIBDIR}/python/include/python${PYTHON_VERSION}") # CACHE PATH)
set(PYTHON_LIBRARY "${LIBDIR}/python/lib/python32mw.lib") # CACHE FILEPATH)
# uncached vars
set(PYTHON_INCLUDE_DIRS "${PYTHON_INCLUDE_DIR}")
set(PYTHON_LIBRARIES "${PYTHON_LIBRARY}")
use lowercase for cmake builtin names and macros, remove contents in else() and endif() which is no longer needed.
2010-12-08 08:43:06 +00:00
endif()
recent fixes for mingw + cmake broke msvc
2010-09-16 07:26:06 +00:00
CMake: Boost and OpenImageIO building support (unused still).
2011-11-07 15:44:09 +00:00
if(WITH_BOOST)
Update MinGW to use correct lib location for boost
2011-11-08 17:19:14 +00:00
set(BOOST ${LIBDIR}/boost)
CMake: Boost and OpenImageIO building support (unused still).
2011-11-07 15:44:09 +00:00
set(BOOST_INCLUDE_DIR ${BOOST}/include)
First MinGW-w64 support for cmake has been added. To test I recommend this build: http://sourceforge.net/projects/mingw-w64/files/Toolchains%20targetting%20Win64/Personal%20Builds/ray_linn/GCC-4.7.0-with-ada/mingw-w64-gcc-4.7.0-runtime-2.0.1-static-ada-20120330.7z/download Other builds may also work but due to the constantly changing nature of the compiler this cannot be guaranteed. I often had to change compilers while building the libraries and this one is the one that did the job for most of them. This first support is experimental and considered "advanced". To enable pass -DWITH_MINGW64 during cmake configuration. Also make sure to extract the compiler on C:/MinGW and that MinGW/bin is in your path. To build check out lib/mingw64. Initially the support is lacking until I get every library compiled correctly. For now you should disable WITH_CYCLES(sorry, I know some people are dying to do benchmarks, but still a few libs to go), WITH_IMAGE_OPENEXR, WITH_OPENCOLLADA, WITH_LIBMV and WITH_CODEC_FFMPEG(links but hangs on startup). Still the tools are working, the memory limit is increased and due to the experimental nature of the setup, full optimization with SSE2 is available, which makes the build quite fast. Also the compiler and especially, the linker are way faster than regular MinGW. The wiki docs have also updated. Happy testing!
2012-04-23 20:09:59 +00:00
if(WITH_MINGW64)
set(BOOST_POSTFIX "mgw47-mt-s-1_49")
set(BOOST_DEBUG_POSTFIX "mgw47-mt-sd-1_49")
else()
set(BOOST_POSTFIX "mgw46-mt-s-1_47")
set(BOOST_DEBUG_POSTFIX "mgw46-mt-sd-1_47")
endif()
CMake: Boost and OpenImageIO building support (unused still).
2011-11-07 15:44:09 +00:00
set(BOOST_LIBRARIES
*Correct syntax for static, since we invoke g++ as linker and we have to pass it to ld. *CMakefile: Update boost and OpenImageIO libraries for MinGW like in the cycles branch
2011-11-08 16:03:28 +00:00
optimized boost_date_time-${BOOST_POSTFIX} boost_filesystem-${BOOST_POSTFIX}
boost_regex-${BOOST_POSTFIX} boost_system-${BOOST_POSTFIX} boost_thread-${BOOST_POSTFIX}
debug boost_date_time-${BOOST_DEBUG_POSTFIX} boost_filesystem-${BOOST_DEBUG_POSTFIX}
boost_regex-${BOOST_DEBUG_POSTFIX} boost_system-${BOOST_DEBUG_POSTFIX} boost_thread-${BOOST_DEBUG_POSTFIX})
Update build files to use the new lib locations for MinGW. For builders: you will need to checkout https://svn.blender.org/svnroot/bf-blender/trunk/lib/mingw32/ to build with MinGW past this commit.
2012-04-23 01:11:42 +00:00
set(BOOST_LIBPATH ${BOOST}/lib)
*Correct syntax for static, since we invoke g++ as linker and we have to pass it to ld. *CMakefile: Update boost and OpenImageIO libraries for MinGW like in the cycles branch
2011-11-08 16:03:28 +00:00
set(BOOST_DEFINITIONS "-DBOOST_ALL_NO_LIB -DBOOST_THREAD_USE_LIB ")
CMake: Boost and OpenImageIO building support (unused still).
2011-11-07 15:44:09 +00:00
endif()
if(WITH_OPENIMAGEIO)
Update build files to use the new lib locations for MinGW. For builders: you will need to checkout https://svn.blender.org/svnroot/bf-blender/trunk/lib/mingw32/ to build with MinGW past this commit.
2012-04-23 01:11:42 +00:00
set(OPENIMAGEIO ${LIBDIR}/openimageio)
CMake: Boost and OpenImageIO building support (unused still).
2011-11-07 15:44:09 +00:00
set(OPENIMAGEIO_INCLUDE_DIRS ${OPENIMAGEIO}/include)
set(OPENIMAGEIO_LIBRARIES OpenImageIO)
set(OPENIMAGEIO_LIBPATH ${OPENIMAGEIO}/lib)
set(OPENIMAGEIO_DEFINITIONS)
endif()
link mingw libstdc++ and libgcc libs statically so users dont need mingw installed to use mingw builds
2012-01-05 07:52:03 +00:00
*Correct syntax for static, since we invoke g++ as linker and we have to pass it to ld. *CMakefile: Update boost and OpenImageIO libraries for MinGW like in the cycles branch
2011-11-08 16:03:28 +00:00
set(PLATFORM_LINKFLAGS "-Xlinker --stack=2097152")
set 2mb stack for mingw too.
2011-03-12 00:50:34 +00:00
disable recent attempt to static link mingw DLL's causes errors for some users. also remove break statement, mistake on last commit.
2012-01-05 10:05:24 +00:00
## DISABLE - causes linking errors
## for re-distrobution, so users dont need mingw installed
# set(PLATFORM_LINKFLAGS "${PLATFORM_LINKFLAGS} -static-libgcc -static-libstdc++")
link mingw libstdc++ and libgcc libs statically so users dont need mingw installed to use mingw builds
2012-01-05 07:52:03 +00:00
use lowercase for cmake builtin names and macros, remove contents in else() and endif() which is no longer needed.
2010-12-08 08:43:06 +00:00
endif()
Fix CMake build system for Windows Add support for OPTION WITH_OPENCOLLADA for Windows
2009-11-11 00:02:49 +00:00
use lowercase for cmake builtin names and macros, remove contents in else() and endif() which is no longer needed.
2010-12-08 08:43:06 +00:00
elseif(APPLE)
OSX/cmake: ensure newest Xcode compatibility, important: still needs a patched cmake ( see error you will get if missed ), patched cmake provided here: http://www.jensverwiebe.de/Blender/CMake%202.8-7patched.zip
2012-03-10 16:21:48 +00:00
if(${CMAKE_OSX_DEPLOYMENT_TARGET} STREQUAL "10.5" OR ${CMAKE_OSX_DEPLOYMENT_TARGET} STRGREATER "10.5")
set(WITH_LIBS10.5 ON CACHE BOOL "Use 10.5 libs" FORCE) # valid also for 10.6/10.7
CMake/OSX: Bugfix [#26375]: Add default values for the OSX architecture: x86_64 (also used to select the python dynlibs that'll be bundled with the application). Set deployment target to be 10.5 by default. Fix broken build introduced by recent source/creator/CMakeList.txt cleanup
2011-03-07 21:28:36 +00:00
endif()
OSX/cmake: LESS must be VERSION_LESS for XCODE_VERSION
2012-04-22 11:23:17 +00:00
if(${XCODE_VERSION} VERSION_LESS 4.3)
style cleanup: whitespace/indentation
2012-05-19 13:55:54 +00:00
set(CMAKE_OSX_SYSROOT /Developer/SDKs/MacOSX${OSX_SYSTEM}.sdk CACHE PATH "" FORCE) # use guaranteed existing sdk
OSX/cmake: ensure newest Xcode compatibility, important: still needs a patched cmake ( see error you will get if missed ), patched cmake provided here: http://www.jensverwiebe.de/Blender/CMake%202.8-7patched.zip
2012-03-10 16:21:48 +00:00
else()
OSX/cmake: added a comment on method used
2012-03-10 16:39:51 +00:00
# note: i don't use xcode-select path on purpose, cause also /Applications/Xcode.app would be allowed
# absolute pathes are more foolproof here !
style cleanup: whitespace/indentation
2012-05-19 13:55:54 +00:00
set(OSX_SYSROOT_PREFIX /Applications/Xcode.app/Contents/Developer/Platforms/MacOSX.platform)
set(OSX_DEVELOPER_PREFIX /Developer/SDKs/MacOSX${OSX_SYSTEM}.sdk) # use guaranteed existing sdk
set(CMAKE_OSX_SYSROOT ${OSX_SYSROOT_PREFIX}/${OSX_DEVELOPER_PREFIX} CACHE PATH "" FORCE)
OSX/cmake: ensure newest Xcode compatibility, important: still needs a patched cmake ( see error you will get if missed ), patched cmake provided here: http://www.jensverwiebe.de/Blender/CMake%202.8-7patched.zip
2012-03-10 16:21:48 +00:00
endif()
use lowercase for cmake builtin names and macros, remove contents in else() and endif() which is no longer needed.
2010-12-08 08:43:06 +00:00
if(WITH_LIBS10.5)
set(LIBDIR ${CMAKE_SOURCE_DIR}/../lib/darwin-9.x.universal)
else()
if(CMAKE_OSX_ARCHITECTURES MATCHES i386)
set(LIBDIR ${CMAKE_SOURCE_DIR}/../lib/darwin-8.x.i386)
else()
set(LIBDIR ${CMAKE_SOURCE_DIR}/../lib/darwin-8.0.0-powerpc)
endif()
endif()
formatting edits only
2011-09-30 15:51:58 +00:00
white space commit. (2 spaces -> tab). Was annoying to use a different editor for cmake only. theeth says this should be ok with gsoc and merges from branches.
2009-09-06 01:51:23 +00:00
use lowercase for cmake builtin names and macros, remove contents in else() and endif() which is no longer needed.
2010-12-08 08:43:06 +00:00
if(WITH_OPENAL)
find_package(OpenAL)
if(OPENAL_FOUND)
set(WITH_OPENAL ON)
set(OPENAL_INCLUDE_DIR "${LIBDIR}/openal/include")
else()
set(WITH_OPENAL OFF)
endif()
endif()
if(WITH_JACK)
set(JACK /usr)
rename cmake include/libraries to conform with suggested cmake names
2011-06-18 14:12:54 +00:00
set(JACK_INCLUDE_DIRS ${JACK}/include/jack)
set(JACK_LIBRARIES jack)
use lowercase for cmake builtin names and macros, remove contents in else() and endif() which is no longer needed.
2010-12-08 08:43:06 +00:00
set(JACK_LIBPATH ${JACK}/lib)
endif()
if(WITH_CODEC_SNDFILE)
set(SNDFILE ${LIBDIR}/sndfile)
added FindSndFile cmake module to replace inline checks.
2011-06-18 12:12:19 +00:00
set(SNDFILE_INCLUDE_DIRS ${SNDFILE}/include)
set(SNDFILE_LIBRARIES sndfile FLAC ogg vorbis vorbisenc)
set(SNDFILE_LIBPATH ${SNDFILE}/lib ${FFMPEG}/lib) # TODO, deprecate
use lowercase for cmake builtin names and macros, remove contents in else() and endif() which is no longer needed.
2010-12-08 08:43:06 +00:00
endif()
print an error message if Python.h can't be found for cmake and scons since its such a common problem.
2011-07-16 06:55:45 +00:00
if(WITH_PYTHON)
OSX/Cmake: make bpy module work finally by linking against python3.2 framework
2012-01-16 20:10:38 +00:00
if(NOT WITH_PYTHON_MODULE)
# we use precompiled libraries for py 3.2 and up by default
print an error message if Python.h can't be found for cmake and scons since its such a common problem.
2011-07-16 06:55:45 +00:00
OSX/Cmake: make bpy module work finally by linking against python3.2 framework
2012-01-16 20:10:38 +00:00
# normally cached but not since we include them with blender
set(PYTHON_VERSION 3.2)
set(PYTHON_INCLUDE_DIR "${LIBDIR}/python/include/python${PYTHON_VERSION}")
# set(PYTHON_BINARY "${LIBDIR}/python/bin/python${PYTHON_VERSION}") # not used yet
set(PYTHON_LIBRARY python${PYTHON_VERSION})
set(PYTHON_LIBPATH "${LIBDIR}/python/lib/python${PYTHON_VERSION}")
# set(PYTHON_LINKFLAGS "-u _PyMac_Error") # won't build with this enabled
else()
# module must be compiled against Python framework
print an error message if Python.h can't be found for cmake and scons since its such a common problem.
2011-07-16 06:55:45 +00:00
OSX/Cmake: make bpy module work finally by linking against python3.2 framework
2012-01-16 20:10:38 +00:00
# normally cached but not since we include them with blender
set(PYTHON_VERSION 3.2)
set(PYTHON_INCLUDE_DIR "/Library/Frameworks/Python.framework/Versions/${PYTHON_VERSION}/include/python${PYTHON_VERSION}m")
set(PYTHON_BINARY "/Library/Frameworks/Python.framework/Versions/${PYTHON_VERSION}/bin/python${PYTHON_VERSION}")
#set(PYTHON_LIBRARY python${PYTHON_VERSION})
set(PYTHON_LIBPATH "/Library/Frameworks/Python.framework/Versions/${PYTHON_VERSION}/lib/python${PYTHON_VERSION}/config-3.2m")
#set(PYTHON_LINKFLAGS "-u _PyMac_Error -framework Python") # won't build with this enabled
endif()
print an error message if Python.h can't be found for cmake and scons since its such a common problem.
2011-07-16 06:55:45 +00:00
# uncached vars
set(PYTHON_INCLUDE_DIRS "${PYTHON_INCLUDE_DIR}")
set(PYTHON_LIBRARIES "${PYTHON_LIBRARY}")
use lowercase for cmake builtin names and macros, remove contents in else() and endif() which is no longer needed.
2010-12-08 08:43:06 +00:00
endif()
if(WITH_INTERNATIONAL)
set(GETTEXT ${LIBDIR}/gettext)
cmake: - fix for cmake's SSE detection which would fail because of strict warnings and also had redundant cache setting. - was incorrectly initializing variables (own bad) - python was searching for libs on every run, now only do this if there not cached.
2011-10-01 19:52:33 +00:00
set(GETTEXT_INCLUDE_DIRS "${GETTEXT}/include")
set(GETTEXT_LIBRARIES intl iconv)
use lowercase for cmake builtin names and macros, remove contents in else() and endif() which is no longer needed.
2010-12-08 08:43:06 +00:00
set(GETTEXT_LIBPATH ${GETTEXT}/lib)
endif()
minor cleanup, no functional changes.
2011-05-09 14:41:44 +00:00
use lowercase for cmake builtin names and macros, remove contents in else() and endif() which is no longer needed.
2010-12-08 08:43:06 +00:00
if(WITH_FFTW3)
set(FFTW3 ${LIBDIR}/fftw3)
rename cmake include/libraries to conform with suggested cmake names
2011-06-18 14:12:54 +00:00
set(FFTW3_INCLUDE_DIRS ${FFTW3}/include)
set(FFTW3_LIBRARIES fftw3)
use lowercase for cmake builtin names and macros, remove contents in else() and endif() which is no longer needed.
2010-12-08 08:43:06 +00:00
set(FFTW3_LIBPATH ${FFTW3}/lib)
endif()
set(PNG_LIBRARIES png)
use cmake defined names for jpeg, png, zlib and python libs, building on *nix with non-standard libjpeg/png/zlib locations was broken. in the case of python this makes it easier to move to find_package(PythonLibs) when 3.x is supported.
2011-01-25 14:43:13 +00:00
set(JPEG_LIBRARIES jpeg)
use lowercase for cmake builtin names and macros, remove contents in else() and endif() which is no longer needed.
2010-12-08 08:43:06 +00:00
set(ZLIB /usr)
use cmake defined names for jpeg, png, zlib and python libs, building on *nix with non-standard libjpeg/png/zlib locations was broken. in the case of python this makes it easier to move to find_package(PythonLibs) when 3.x is supported.
2011-01-25 14:43:13 +00:00
set(ZLIB_INCLUDE_DIRS "${ZLIB}/include")
use lowercase for cmake builtin names and macros, remove contents in else() and endif() which is no longer needed.
2010-12-08 08:43:06 +00:00
set(ZLIB_LIBRARIES z bz2)
set(FREETYPE ${LIBDIR}/freetype)
set(FREETYPE_INCLUDE_DIRS ${FREETYPE}/include ${FREETYPE}/include/freetype2)
set(FREETYPE_LIBPATH ${FREETYPE}/lib)
set(FREETYPE_LIBRARY freetype)
if(WITH_IMAGE_OPENEXR)
set(OPENEXR ${LIBDIR}/openexr)
use full library paths for openexr & msvc, also remove unneeded exr includes
2011-06-15 13:54:57 +00:00
set(OPENEXR_INCLUDE_DIRS ${OPENEXR}/include/OpenEXR)
replace own inline cmake include search logic for a typical FindXXX.cmake module.
2011-06-15 12:09:02 +00:00
set(OPENEXR_LIBRARIES Iex Half IlmImf Imath IlmThread)
use lowercase for cmake builtin names and macros, remove contents in else() and endif() which is no longer needed.
2010-12-08 08:43:06 +00:00
set(OPENEXR_LIBPATH ${OPENEXR}/lib)
endif()
if(WITH_CODEC_FFMPEG)
set(FFMPEG ${LIBDIR}/ffmpeg)
rename cmake include/libraries to conform with suggested cmake names
2011-06-18 14:12:54 +00:00
set(FFMPEG_INCLUDE_DIRS ${FFMPEG}/include)
set(FFMPEG_LIBRARIES avcodec avdevice avformat avutil mp3lame swscale x264 xvidcore theora theoradec theoraenc vorbis vorbisenc vorbisfile ogg)
use lowercase for cmake builtin names and macros, remove contents in else() and endif() which is no longer needed.
2010-12-08 08:43:06 +00:00
set(FFMPEG_LIBPATH ${FFMPEG}/lib)
set(CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} -D__STDC_CONSTANT_MACROS")
endif()
formatting edits only
2011-09-30 15:51:58 +00:00
find_library(SYSTEMSTUBS_LIBRARY
NAMES
SystemStubs
Fixes an issue with OSX Lion Also cleaned up the python detection for OSX Kent
2011-08-02 17:35:07 +00:00
PATHS
)
mark_as_advanced(SYSTEMSTUBS_LIBRARY)
if(SYSTEMSTUBS_LIBRARY)
set(PLATFORM_LINKLIBS stdc++ SystemStubs)
whitespace cleanup
2011-09-25 12:31:21 +00:00
else()
Fixes an issue with OSX Lion Also cleaned up the python detection for OSX Kent
2011-08-02 17:35:07 +00:00
set(PLATFORM_LINKLIBS stdc++)
endif()
use lowercase for cmake builtin names and macros, remove contents in else() and endif() which is no longer needed.
2010-12-08 08:43:06 +00:00
if(WITH_COCOA)
set(PLATFORM_CFLAGS "-pipe -funsigned-char -DGHOST_COCOA")
set(PLATFORM_LINKFLAGS "-fexceptions -framework CoreServices -framework Foundation -framework IOKit -framework AppKit -framework Cocoa -framework Carbon -framework AudioUnit -framework AudioToolbox -framework CoreAudio")
if(USE_QTKIT)
set(PLATFORM_CFLAGS "${PLATFORM_CFLAGS} -DUSE_QTKIT")
set(PLATFORM_LINKFLAGS "${PLATFORM_LINKFLAGS} -framework QTKit")
if(CMAKE_OSX_ARCHITECTURES MATCHES i386)
set(PLATFORM_LINKFLAGS "${PLATFORM_LINKFLAGS} -framework QuickTime")
formatting edits only
2011-09-30 15:51:58 +00:00
#libSDL still needs 32bit carbon quicktime
use lowercase for cmake builtin names and macros, remove contents in else() and endif() which is no longer needed.
2010-12-08 08:43:06 +00:00
endif()
elseif(WITH_CODEC_QUICKTIME)
set(PLATFORM_LINKFLAGS "${PLATFORM_LINKFLAGS} -framework QuickTime")
endif()
enable NDOF by default with cmake again, but check if it can be found on OSX, if not disable. I cant test this but at least if I made a mistake it will just not find the SDK and disable. an osx dev needs to test.
2011-08-03 14:18:02 +00:00
formatting edits only
2011-09-30 15:51:58 +00:00
# XXX - SOME MAC DEV PLEASE TEST WITH THE SDK INSTALLED!
enable NDOF by default with cmake again, but check if it can be found on OSX, if not disable. I cant test this but at least if I made a mistake it will just not find the SDK and disable. an osx dev needs to test.
2011-08-03 14:18:02 +00:00
# ALSO SHOULD BE MOVED INTO OWN MODULE WHEN FUNCTIONAL
if(WITH_INPUT_NDOF)
# This thread it *should* work and check the framework - campbell
# http://www.cmake.org/pipermail/cmake/2005-December/007740.html
find_library(3D_CONNEXION_CLIENT_LIBRARY
NAMES 3DconnexionClient
)
if(NOT 3D_CONNEXION_CLIENT_LIBRARY)
set(WITH_INPUT_NDOF OFF)
endif()
fix for building ndof with cmake on osx
2011-08-07 15:06:35 +00:00
if(WITH_INPUT_NDOF)
set(PLATFORM_LINKFLAGS "${PLATFORM_LINKFLAGS} -weak_framework 3DconnexionClient")
endif()
enable NDOF by default with cmake again, but check if it can be found on OSX, if not disable. I cant test this but at least if I made a mistake it will just not find the SDK and disable. an osx dev needs to test.
2011-08-03 14:18:02 +00:00
endif()
use lowercase for cmake builtin names and macros, remove contents in else() and endif() which is no longer needed.
2010-12-08 08:43:06 +00:00
else()
set(PLATFORM_CFLAGS "-pipe -funsigned-char")
set(PLATFORM_LINKFLAGS "-fexceptions -framework CoreServices -framework Foundation -framework IOKit -framework AppKit -framework Carbon -framework AGL -framework AudioUnit -framework AudioToolbox -framework CoreAudio -framework QuickTime")
enable NDOF by default with cmake again, but check if it can be found on OSX, if not disable. I cant test this but at least if I made a mistake it will just not find the SDK and disable. an osx dev needs to test.
2011-08-03 14:18:02 +00:00
set(WITH_INPUT_NDOF OFF) # unsupported
use lowercase for cmake builtin names and macros, remove contents in else() and endif() which is no longer needed.
2010-12-08 08:43:06 +00:00
endif()
OSX/Cmake: make bpy module work finally by linking against python3.2 framework
2012-01-16 20:10:38 +00:00
if(WITH_PYTHON_MODULE)
set(PLATFORM_LINKFLAGS "${PLATFORM_LINKFLAGS} /Library/Frameworks/Python.framework/Versions/${PYTHON_VERSION}/python")# force cmake to link right framework
endif()
use lowercase for cmake builtin names and macros, remove contents in else() and endif() which is no longer needed.
2010-12-08 08:43:06 +00:00
if(WITH_OPENCOLLADA)
set(OPENCOLLADA ${LIBDIR}/opencollada)
opencollada find module. hopefully solves the problem where includes can in an `/include` subdir or not.
2011-08-24 16:04:35 +00:00
set(OPENCOLLADA_INCLUDE_DIRS
${LIBDIR}/opencollada/include/COLLADAStreamWriter
${LIBDIR}/opencollada/include/COLLADABaseUtils
${LIBDIR}/opencollada/include/COLLADAFramework
${LIBDIR}/opencollada/include/COLLADASaxFrameworkLoader
${LIBDIR}/opencollada/include/GeneratedSaxParser
)
use lowercase for cmake builtin names and macros, remove contents in else() and endif() which is no longer needed.
2010-12-08 08:43:06 +00:00
set(OPENCOLLADA_LIBPATH ${OPENCOLLADA}/lib)
style cleanup: whitespace/indentation
2012-05-19 13:55:54 +00:00
set(OPENCOLLADA_LIBRARIES "OpenCOLLADASaxFrameworkLoader -lOpenCOLLADAFramework -lOpenCOLLADABaseUtils -lOpenCOLLADAStreamWriter -lMathMLSolver -lGeneratedSaxParser -lUTF -lxml2 -lbuffer -lftoa")
Merge from trunk -r 24182:24247. Skipped change 24182 (merge of this branch into trunk).
2009-11-02 17:35:23 +00:00
#pcre is bundled with openCollada
use lowercase for cmake builtin names and macros, remove contents in else() and endif() which is no longer needed.
2010-12-08 08:43:06 +00:00
#set(PCRE ${LIBDIR}/pcre)
#set(PCRE_LIBPATH ${PCRE}/lib)
fix for error linking opencollada on linux.
2011-09-12 13:58:13 +00:00
set(PCRE_LIBRARIES pcre)
Fix CMake build system for Windows Add support for OPTION WITH_OPENCOLLADA for Windows
2009-11-11 00:02:49 +00:00
#libxml2 is used
use lowercase for cmake builtin names and macros, remove contents in else() and endif() which is no longer needed.
2010-12-08 08:43:06 +00:00
#set(EXPAT ${LIBDIR}/expat)
#set(EXPAT_LIBPATH ${EXPAT}/lib)
set(EXPAT_LIB)
endif()
if(WITH_SDL)
set(SDL ${LIBDIR}/sdl)
set(SDL_INCLUDE_DIR ${SDL}/include)
set(SDL_LIBRARY SDL)
set(SDL_LIBPATH ${SDL}/lib)
endif()
set(PNG "${LIBDIR}/png")
use cmake defined names for jpeg, png, zlib and python libs, building on *nix with non-standard libjpeg/png/zlib locations was broken. in the case of python this makes it easier to move to find_package(PythonLibs) when 3.x is supported.
2011-01-25 14:43:13 +00:00
set(PNG_INCLUDE_DIR "${PNG}/include")
use lowercase for cmake builtin names and macros, remove contents in else() and endif() which is no longer needed.
2010-12-08 08:43:06 +00:00
set(PNG_LIBPATH ${PNG}/lib)
set(JPEG "${LIBDIR}/jpeg")
use cmake defined names for jpeg, png, zlib and python libs, building on *nix with non-standard libjpeg/png/zlib locations was broken. in the case of python this makes it easier to move to find_package(PythonLibs) when 3.x is supported.
2011-01-25 14:43:13 +00:00
set(JPEG_INCLUDE_DIR "${JPEG}/include")
use lowercase for cmake builtin names and macros, remove contents in else() and endif() which is no longer needed.
2010-12-08 08:43:06 +00:00
set(JPEG_LIBPATH ${JPEG}/lib)
if(WITH_IMAGE_TIFF)
set(TIFF ${LIBDIR}/tiff)
set(TIFF_INCLUDE_DIR ${TIFF}/include)
set(TIFF_LIBRARY tiff)
set(TIFF_LIBPATH ${TIFF}/lib)
endif()
NDOF related edits - fix for building without NDOF on X11 - quiet some warnings
2011-08-02 05:52:27 +00:00
if (WITH_INPUT_NDOF)
first attempt at CMake fix (untested)
2011-06-27 23:24:24 +00:00
# linker needs "-weak_framework 3DconnexionClient"
endif()
CMake: Boost and OpenImageIO building support (unused still).
2011-11-07 15:44:09 +00:00
if(WITH_BOOST)
set(BOOST ${LIBDIR}/boost)
set(BOOST_INCLUDE_DIR ${BOOST}/include)
set(BOOST_LIBRARIES boost_date_time-mt boost_filesystem-mt boost_regex-mt boost_system-mt boost_thread-mt)
set(BOOST_LIBPATH ${BOOST}/lib)
set(BOOST_DEFINITIONS)
endif()
if(WITH_OPENIMAGEIO)
set(OPENIMAGEIO ${LIBDIR}/openimageio)
set(OPENIMAGEIO_INCLUDE_DIRS ${OPENIMAGEIO}/include)
set(OPENIMAGEIO_LIBRARIES OpenImageIO ${PNG_LIBRARIES} ${JPEG_LIBRARIES} ${TIFF_LIBRARY} ${OPENEXR_LIBRARIES} ${ZLIB_LIBRARIES})
set(OPENIMAGEIO_LIBPATH ${OPENIMAGEIO}/lib ${JPEG_LIBPATH} ${PNG_LIBPATH} ${TIFF_LIBPATH} ${OPENEXR_LIBPATH} ${ZLIB_LIBPATH})
set(OPENIMAGEIO_DEFINITIONS "-DOIIO_STATIC_BUILD")
endif()
use lowercase for cmake builtin names and macros, remove contents in else() and endif() which is no longer needed.
2010-12-08 08:43:06 +00:00
set(EXETYPE MACOSX_BUNDLE)
set(CMAKE_C_FLAGS_DEBUG "-fno-strict-aliasing -g")
set(CMAKE_CXX_FLAGS_DEBUG "-fno-strict-aliasing -g")
if(CMAKE_OSX_ARCHITECTURES MATCHES "i386")
minor cmake edits: - osx was defaulting to -O3. - clang wasnt detecting sse compiler args.
2011-10-02 16:43:39 +00:00
set(CMAKE_CXX_FLAGS_RELEASE "-O2 -mdynamic-no-pic -ftree-vectorize -msse -msse2 -fvariable-expansion-in-unroller")
set(CMAKE_C_FLAGS_RELEASE "-O2 -mdynamic-no-pic -ftree-vectorize -msse -msse2 -fvariable-expansion-in-unroller")
use lowercase for cmake builtin names and macros, remove contents in else() and endif() which is no longer needed.
2010-12-08 08:43:06 +00:00
elseif(CMAKE_OSX_ARCHITECTURES MATCHES "x86_64")
minor cmake edits: - osx was defaulting to -O3. - clang wasnt detecting sse compiler args.
2011-10-02 16:43:39 +00:00
set(CMAKE_CXX_FLAGS_RELEASE "-O2 -mdynamic-no-pic -ftree-vectorize -msse -msse2 -msse3 -mssse3 -fvariable-expansion-in-unroller")
set(CMAKE_C_FLAGS_RELEASE "-O2 -mdynamic-no-pic -ftree-vectorize -msse -msse2 -msse3 -mssse3 -fvariable-expansion-in-unroller")
use lowercase for cmake builtin names and macros, remove contents in else() and endif() which is no longer needed.
2010-12-08 08:43:06 +00:00
else()
set(CMAKE_C_FLAGS_RELEASE "-mdynamic-no-pic -fno-strict-aliasing")
set(CMAKE_CXX_FLAGS_RELEASE "-mdynamic-no-pic -fno-strict-aliasing")
endif()
endif()
CMake lists initial submission. Documentationand further verification for different platforms will follow soon. This was just tested against current CVS on MSVC 2005 with Verse, QuickTime, OpenEXR, Player all on.
2006-11-17 02:27:12 +00:00
#-----------------------------------------------------------------------------
# Common.
bugfix [#23257] cmake tests for SSE, but SSE2 gets enabled patch from Vinay Pawar, some minor changes by me.
2010-08-11 08:23:48 +00:00
CMake changes - don't allow building if the LIBDIR is not found on mac/windows. - by default use -O2 rather then -O3 for GCC release flags, was crashing some GCC versions and blender releases are supposed to use -O2.
2011-05-23 14:56:14 +00:00
if(APPLE OR WIN32)
This solves the issue of having symlinks in the LIBDIR path (CMAKE Windows). Hopefully it doesn't break other things.
2011-06-26 08:42:00 +00:00
if(NOT EXISTS "${LIBDIR}/")
CMake changes - don't allow building if the LIBDIR is not found on mac/windows. - by default use -O2 rather then -O3 for GCC release flags, was crashing some GCC versions and blender releases are supposed to use -O2.
2011-05-23 14:56:14 +00:00
message(FATAL_ERROR "Apple and Windows require pre-compiled libs at: '${LIBDIR}'")
endif()
endif()
don't disable cycles when OIIO isnt found, instead throw an error, annoying when full build is done and later find cycles isn't on.
2012-07-01 15:26:25 +00:00
if(WITH_CYCLES)
if(NOT WITH_OPENIMAGEIO)
message(FATAL_ERROR "Cycles reqires WITH_OPENIMAGEIO, the library may not have been found. Configure OIIO or disable WITH_CYCLES")
endif()
if(NOT WITH_BOOST)
message(FATAL_ERROR "Cycles reqires WITH_BOOST, the library may not have been found. Configure BOOST or disable WITH_CYCLES")
endif()
endif()
add sse flags for cmake/msvc
2011-08-01 06:11:41 +00:00
# See TEST_SSE_SUPPORT() for how this is defined.
use lowercase for cmake builtin names and macros, remove contents in else() and endif() which is no longer needed.
2010-12-08 08:43:06 +00:00
if(WITH_RAYOPTIMIZATION)
add sse flags for cmake/msvc
2011-08-01 06:11:41 +00:00
if(SUPPORT_SSE_BUILD)
cmake: sse flags were being defined in 2 different places
2011-10-01 18:29:40 +00:00
set(PLATFORM_CFLAGS " ${COMPILER_SSE_FLAG} ${PLATFORM_CFLAGS}")
add sse flags for cmake/msvc
2011-08-01 06:11:41 +00:00
add_definitions(-D__SSE__ -D__MMX__)
endif()
if(SUPPORT_SSE2_BUILD)
cmake: sse flags were being defined in 2 different places
2011-10-01 18:29:40 +00:00
set(PLATFORM_CFLAGS " ${COMPILER_SSE2_FLAG} ${PLATFORM_CFLAGS}")
add sse flags for cmake/msvc
2011-08-01 06:11:41 +00:00
add_definitions(-D__SSE2__)
if(NOT SUPPORT_SSE_BUILD) # dont double up
add_definitions(-D__MMX__)
use lowercase for cmake builtin names and macros, remove contents in else() and endif() which is no longer needed.
2010-12-08 08:43:06 +00:00
endif()
endif()
endif()
cleanup endian handling - define __BIG_ENDIAN__ or __LITTLE_ENDIAN__ with cmake & scons. - ENDIAN_ORDER is now a define rather than a global short. - replace checks like this with single ifdef: #if defined(__sgi) || defined (__sparc) || defined (__sparc__) || defined (__PPC__) || defined (__ppc__) || defined (__hppa__) || defined (__BIG_ENDIAN__) - remove BKE_endian.h which isn't used
2011-09-19 08:02:17 +00:00
# set the endian define
fix for building on windows, clear some warnings too
2011-09-27 01:32:27 +00:00
if(MSVC)
# for some reason this fails on msvc
cleanup endian handling - define __BIG_ENDIAN__ or __LITTLE_ENDIAN__ with cmake & scons. - ENDIAN_ORDER is now a define rather than a global short. - replace checks like this with single ifdef: #if defined(__sgi) || defined (__sparc) || defined (__sparc__) || defined (__PPC__) || defined (__ppc__) || defined (__hppa__) || defined (__BIG_ENDIAN__) - remove BKE_endian.h which isn't used
2011-09-19 08:02:17 +00:00
add_definitions(-D__LITTLE_ENDIAN__)
fix for building on windows, clear some warnings too
2011-09-27 01:32:27 +00:00
else()
include(TestBigEndian)
test_big_endian(_SYSTEM_BIG_ENDIAN)
if(_SYSTEM_BIG_ENDIAN)
add_definitions(-D__BIG_ENDIAN__)
else()
add_definitions(-D__LITTLE_ENDIAN__)
endif()
unset(_SYSTEM_BIG_ENDIAN)
cleanup endian handling - define __BIG_ENDIAN__ or __LITTLE_ENDIAN__ with cmake & scons. - ENDIAN_ORDER is now a define rather than a global short. - replace checks like this with single ifdef: #if defined(__sgi) || defined (__sparc) || defined (__sparc__) || defined (__PPC__) || defined (__ppc__) || defined (__hppa__) || defined (__BIG_ENDIAN__) - remove BKE_endian.h which isn't used
2011-09-19 08:02:17 +00:00
endif()
use lowercase for cmake builtin names and macros, remove contents in else() and endif() which is no longer needed.
2010-12-08 08:43:06 +00:00
if(WITH_IMAGE_OPENJPEG)
add cmake option WITH_SYSTEM_OPENJPEG so linux can build cycles without having libopenjpeg installed.
2012-06-23 14:23:44 +00:00
if(WITH_SYSTEM_OPENJPEG)
cmake: added FindOpenJPEG module.
2011-06-19 07:46:24 +00:00
# dealt with above
patch from IRIE Shinsuke, use systems openjpeg on *nix.
2011-02-15 19:04:51 +00:00
else()
cmake: added FindOpenJPEG module.
2011-06-19 07:46:24 +00:00
set(OPENJPEG_INCLUDE_DIRS "${CMAKE_SOURCE_DIR}/extern/libopenjpeg")
Set openjpeg to static. Solves linking issues on recent openjpeg update
2012-06-21 14:44:15 +00:00
add_definitions(-DOPJ_STATIC)
patch from IRIE Shinsuke, use systems openjpeg on *nix.
2011-02-15 19:04:51 +00:00
endif()
use lowercase for cmake builtin names and macros, remove contents in else() and endif() which is no longer needed.
2010-12-08 08:43:06 +00:00
endif()
CMake lists initial submission. Documentationand further verification for different platforms will follow soon. This was just tested against current CVS on MSVC 2005 with Verse, QuickTime, OpenEXR, Player all on.
2006-11-17 02:27:12 +00:00
use lowercase for cmake builtin names and macros, remove contents in else() and endif() which is no longer needed.
2010-12-08 08:43:06 +00:00
if(WITH_IMAGE_REDCODE)
Add option for CMake to build libredcode, also use CODEC prefix for ffmpeg, quicktime & sndfile options.
2010-11-30 18:52:39 +00:00
set(REDCODE ${CMAKE_SOURCE_DIR}/extern)
set(REDCODE_INC ${REDCODE})
use lowercase for cmake builtin names and macros, remove contents in else() and endif() which is no longer needed.
2010-12-08 08:43:06 +00:00
endif()
Add option for CMake to build libredcode, also use CODEC prefix for ffmpeg, quicktime & sndfile options.
2010-11-30 18:52:39 +00:00
WebPlugin fix: * web plugin works on opera too sandboxing: * added AppArmor configuration * enabled privilege separation for the web plugin: the blender player can run as a lower privileged user, xauth token is generated on the fly . testing: * web plugin tested on ubuntu 32/64bit, fedora and FreeBSD Changed only cmake build script: AppArmor is enabled by default, if you want to enable privilege separation instead, you have to change the cmake variable WEBPLUGIN_SANDBOX_MODE to privsep (or none to disable it). Warning: source/gameengine/GamePlayer/xembed/blenderplayer-wrapper.c must be setuid root in order to change user successfully
2008-10-07 17:13:35 +00:00
#-----------------------------------------------------------------------------
# Blender WebPlugin
formatting edits only
2011-09-30 15:51:58 +00:00
if(WITH_WEBPLUGIN)
use lowercase for cmake builtin names and macros, remove contents in else() and endif() which is no longer needed.
2010-12-08 08:43:06 +00:00
set(GECKO_DIR "${CMAKE_SOURCE_DIR}/../gecko-sdk/" CACHE PATH "Gecko SDK path")
set(WEBPLUGIN_SANDBOX_MODE "apparmor" CACHE STRING "WEB Plugin sandbox mode, can be apparmor, privsep, none")
WebPlugin fix: * web plugin works on opera too sandboxing: * added AppArmor configuration * enabled privilege separation for the web plugin: the blender player can run as a lower privileged user, xauth token is generated on the fly . testing: * web plugin tested on ubuntu 32/64bit, fedora and FreeBSD Changed only cmake build script: AppArmor is enabled by default, if you want to enable privilege separation instead, you have to change the cmake variable WEBPLUGIN_SANDBOX_MODE to privsep (or none to disable it). Warning: source/gameengine/GamePlayer/xembed/blenderplayer-wrapper.c must be setuid root in order to change user successfully
2008-10-07 17:13:35 +00:00
use lowercase for cmake builtin names and macros, remove contents in else() and endif() which is no longer needed.
2010-12-08 08:43:06 +00:00
set(WITH_PLAYER ON)
endif()
WebPlugin fix: * web plugin works on opera too sandboxing: * added AppArmor configuration * enabled privilege separation for the web plugin: the blender player can run as a lower privileged user, xauth token is generated on the fly . testing: * web plugin tested on ubuntu 32/64bit, fedora and FreeBSD Changed only cmake build script: AppArmor is enabled by default, if you want to enable privilege separation instead, you have to change the cmake variable WEBPLUGIN_SANDBOX_MODE to privsep (or none to disable it). Warning: source/gameengine/GamePlayer/xembed/blenderplayer-wrapper.c must be setuid root in order to change user successfully
2008-10-07 17:13:35 +00:00
CMake lists initial submission. Documentationand further verification for different platforms will follow soon. This was just tested against current CVS on MSVC 2005 with Verse, QuickTime, OpenEXR, Player all on.
2006-11-17 02:27:12 +00:00
#-----------------------------------------------------------------------------
# Configure OpenGL.
use lowercase for cmake builtin names and macros, remove contents in else() and endif() which is no longer needed.
2010-12-08 08:43:06 +00:00
find_package(OpenGL)
cmake: remove python include in the wm module, set opengl as a system include.
2011-06-08 05:39:58 +00:00
blender_include_dirs_sys("${OPENGL_INCLUDE_DIR}")
formatting edits only
2011-09-30 15:51:58 +00:00
# unset(OPENGL_LIBRARIES CACHE) # not compat with older cmake
# unset(OPENGL_xmesa_INCLUDE_DIR CACHE) # not compat with older cmake
Merge from trunk -r 22040:23000.
2009-10-19 16:20:12 +00:00
use CMake's OpenMP built in detection rather then defining flags ourselves.
2010-11-19 11:33:12 +00:00
#-----------------------------------------------------------------------------
# Configure OpenMP.
use lowercase for cmake builtin names and macros, remove contents in else() and endif() which is no longer needed.
2010-12-08 08:43:06 +00:00
if(WITH_OPENMP)
formatting edits only
2011-09-30 15:51:58 +00:00
find_package(OpenMP)
use lowercase for cmake builtin names and macros, remove contents in else() and endif() which is no longer needed.
2010-12-08 08:43:06 +00:00
if(OPENMP_FOUND)
set(CMAKE_C_FLAGS "${CMAKE_C_FLAGS} ${OpenMP_C_FLAGS}")
set(CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} ${OpenMP_CXX_FLAGS}")
if(APPLE AND ${CMAKE_GENERATOR} MATCHES "Xcode")
set(CMAKE_XCODE_ATTRIBUTE_ENABLE_OPENMP_SUPPORT "YES")
endif()
else()
set(WITH_OPENMP OFF)
endif()
fix for cmake flag detection, was not caching the resulting variable so the test ran each time. also cache SSE, SSE2 checks.
2010-12-21 03:32:51 +00:00
formatting edits only
2011-09-30 15:51:58 +00:00
mark_as_advanced(
OpenMP_C_FLAGS
OpenMP_CXX_FLAGS
)
endif()
use CMake's OpenMP built in detection rather then defining flags ourselves.
2010-11-19 11:33:12 +00:00
add option WITH_BUILTIN_GLEW, so linux packagers can disable to use their own glew library.
2011-04-05 23:31:01 +00:00
#-----------------------------------------------------------------------------
# Configure GLEW
rename WITH_BUILTIN_GLEW, WITH_SYSTEM_GLEW & negate.
2012-06-23 13:42:14 +00:00
if(WITH_SYSTEM_GLEW)
add option WITH_BUILTIN_GLEW, so linux packagers can disable to use their own glew library.
2011-04-05 23:31:01 +00:00
find_package(GLEW)
if(NOT GLEW_FOUND)
rename WITH_BUILTIN_GLEW, WITH_SYSTEM_GLEW & negate.
2012-06-23 13:42:14 +00:00
message(FATAL_ERROR "GLEW is required to build blender, install it or disable WITH_SYSTEM_GLEW")
add option WITH_BUILTIN_GLEW, so linux packagers can disable to use their own glew library.
2011-04-05 23:31:01 +00:00
endif()
formatting edits only
2011-09-30 15:51:58 +00:00
mark_as_advanced(
GLEW_LIBRARY
GLEW_INCLUDE_PATH
)
rename WITH_BUILTIN_GLEW, WITH_SYSTEM_GLEW & negate.
2012-06-23 13:42:14 +00:00
else()
# set(GLEW_LIBRARY "") # unused
set(GLEW_INCLUDE_PATH "${CMAKE_SOURCE_DIR}/extern/glew/include")
add option WITH_BUILTIN_GLEW, so linux packagers can disable to use their own glew library.
2011-04-05 23:31:01 +00:00
endif()
CMake lists initial submission. Documentationand further verification for different platforms will follow soon. This was just tested against current CVS on MSVC 2005 with Verse, QuickTime, OpenEXR, Player all on.
2006-11-17 02:27:12 +00:00
#-----------------------------------------------------------------------------
support for blender as a module on win32.
2011-03-24 00:14:49 +00:00
# Configure Python.
if(WITH_PYTHON_MODULE)
add_definitions(-DPy_ENABLE_SHARED)
formatting edits only
2011-09-30 15:51:58 +00:00
endif()
support for blender as a module on win32.
2011-03-24 00:14:49 +00:00
#-----------------------------------------------------------------------------
CMake lists initial submission. Documentationand further verification for different platforms will follow soon. This was just tested against current CVS on MSVC 2005 with Verse, QuickTime, OpenEXR, Player all on.
2006-11-17 02:27:12 +00:00
# Extra compile flags
define NDEBUG for release builds so assert() is disabled.
2010-10-18 12:35:40 +00:00
use lowercase for cmake builtin names and macros, remove contents in else() and endif() which is no longer needed.
2010-12-08 08:43:06 +00:00
if(CMAKE_COMPILER_IS_GNUCC)
CMake now tests warnings are supported, GCC 4.0 wasn't working because of unsupported warnings. this can work for other compilers too, currently intel and gcc use this.
2010-12-16 09:55:35 +00:00
fix for cmake flag detection, was not caching the resulting variable so the test ran each time. also cache SSE, SSE2 checks.
2010-12-21 03:32:51 +00:00
ADD_CHECK_C_COMPILER_FLAG(C_WARNINGS C_WARN_ALL -Wall)
ADD_CHECK_C_COMPILER_FLAG(C_WARNINGS C_WARN_CAST_ALIGN -Wcast-align)
ADD_CHECK_C_COMPILER_FLAG(C_WARNINGS C_WARN_ERROR_DECLARATION_AFTER_STATEMENT -Werror=declaration-after-statement)
ADD_CHECK_C_COMPILER_FLAG(C_WARNINGS C_WARN_ERROR_IMPLICIT_FUNCTION_DECLARATION -Werror=implicit-function-declaration)
ADD_CHECK_C_COMPILER_FLAG(C_WARNINGS C_WARN_ERROR_RETURN_TYPE -Werror=return-type)
CMake, GCC: replace -Werror=strict-prototypes with -Wstrict-prototypes, some external headers cause this.
2011-03-15 22:30:07 +00:00
# system headers sometimes do this, disable for now, was: -Werror=strict-prototypes
set CMake's GCC warnings for GCC4.6. -Wdouble-promotion -Wno-error=double-promotion -Wno-error=unused-but-set-variable
2011-03-28 02:11:51 +00:00
ADD_CHECK_C_COMPILER_FLAG(C_WARNINGS C_WARN_STRICT_PROTOTYPES -Wstrict-prototypes)
fix for cmake flag detection, was not caching the resulting variable so the test ran each time. also cache SSE, SSE2 checks.
2010-12-21 03:32:51 +00:00
ADD_CHECK_C_COMPILER_FLAG(C_WARNINGS C_WARN_NO_CHAR_SUBSCRIPTS -Wno-char-subscripts)
ADD_CHECK_C_COMPILER_FLAG(C_WARNINGS C_WARN_NO_UNKNOWN_PRAGMAS -Wno-unknown-pragmas)
ADD_CHECK_C_COMPILER_FLAG(C_WARNINGS C_WARN_POINTER_ARITH -Wpointer-arith)
ADD_CHECK_C_COMPILER_FLAG(C_WARNINGS C_WARN_UNUSED_PARAMETER -Wunused-parameter)
ADD_CHECK_C_COMPILER_FLAG(C_WARNINGS C_WARN_WRITE_STRINGS -Wwrite-strings)
comment -Wundef for cmake default flags, this causes too many warnings with mingw.
2011-09-26 09:43:35 +00:00
# # this causes too many warnings, disable
# ADD_CHECK_C_COMPILER_FLAG(C_WARNINGS C_WARN_UNDEFINED -Wundef)
quiet various warnings, also disable -Wdouble-promotion with cmake since it gives warnings with variable length args.
2011-04-03 10:04:16 +00:00
# disable because it gives warnings for printf() & friends.
# ADD_CHECK_C_COMPILER_FLAG(C_WARNINGS C_WARN_DOUBLE_PROMOTION -Wdouble-promotion -Wno-error=double-promotion)
OSX: fix compile by conditional unsupported flags
2012-01-01 16:46:08 +00:00
if(NOT APPLE)
ADD_CHECK_C_COMPILER_FLAG(C_WARNINGS C_WARN_NO_ERROR_UNUSED_BUT_SET_VARIABLE -Wno-error=unused-but-set-variable)
endif()
fix for cmake flag detection, was not caching the resulting variable so the test ran each time. also cache SSE, SSE2 checks.
2010-12-21 03:32:51 +00:00
ADD_CHECK_CXX_COMPILER_FLAG(CXX_WARNINGS CXX_WARN_ALL -Wall)
ADD_CHECK_CXX_COMPILER_FLAG(CXX_WARNINGS CXX_WARN_NO_INVALID_OFFSETOF -Wno-invalid-offsetof)
ADD_CHECK_CXX_COMPILER_FLAG(CXX_WARNINGS CXX_WARN_NO_SIGN_COMPARE -Wno-sign-compare)
comment -Wundef for cmake default flags, this causes too many warnings with mingw.
2011-09-26 09:43:35 +00:00
# # this causes too many warnings, disable
# ADD_CHECK_CXX_COMPILER_FLAG(CXX_WARNINGS CXX_WARN_UNDEFINED -Wundef)
CMake now tests warnings are supported, GCC 4.0 wasn't working because of unsupported warnings. this can work for other compilers too, currently intel and gcc use this.
2010-12-16 09:55:35 +00:00
correct flags for older GCC's which dont suppport -Wno-deprecated-declarations, detect if the flag is supported before use
2011-10-30 04:48:00 +00:00
# flags to undo strict flags
ADD_CHECK_C_COMPILER_FLAG(CC_REMOVE_STRICT_FLAGS C_WARN_NO_DEPRECATED_DECLARATIONS -Wno-deprecated-declarations)
hopefully fix problem with cmake on osx (older gcc version)
2011-11-01 00:34:09 +00:00
ADD_CHECK_C_COMPILER_FLAG(CC_REMOVE_STRICT_FLAGS C_WARN_NO_UNUSED_PARAMETER -Wno-unused-parameter)
OSX: fix compile by conditional unsupported flags
2012-01-01 16:46:08 +00:00
if(NOT APPLE)
left out one tiny word...
2012-01-01 22:23:08 +00:00
ADD_CHECK_C_COMPILER_FLAG(CC_REMOVE_STRICT_FLAGS C_WARN_NO_ERROR_UNUSED_BUT_SET_VARIABLE -Wno-error=unused-but-set-variable)
OSX: fix compile by conditional unsupported flags
2012-01-01 16:46:08 +00:00
endif()
correct flags for older GCC's which dont suppport -Wno-deprecated-declarations, detect if the flag is supported before use
2011-10-30 04:48:00 +00:00
minor fixes - new compositor could use uninitialized var - profile conversion could use uninitialized var - set better warnings for clang+cmake. - remove picky warnings from sphinx doc gen shell script.
2012-06-11 12:13:41 +00:00
elseif(CMAKE_CXX_COMPILER_ID MATCHES "Clang")
ADD_CHECK_C_COMPILER_FLAG(C_WARNINGS C_WARN_ALL -Wall)
ADD_CHECK_C_COMPILER_FLAG(C_WARNINGS C_WARN_NO_AUTOLOGICAL_COMPARE -Wno-tautological-compare)
ADD_CHECK_C_COMPILER_FLAG(C_WARNINGS C_WARN_NO_UNKNOWN_PRAGMAS -Wno-unknown-pragmas)
ADD_CHECK_C_COMPILER_FLAG(C_WARNINGS C_WARN_NO_CHAR_SUBSCRIPTS -Wno-char-subscripts)
ADD_CHECK_C_COMPILER_FLAG(CXX_WARNINGS C_WARN_ALL -Wall)
ADD_CHECK_C_COMPILER_FLAG(CXX_WARNINGS CXX_WARN_NO_AUTOLOGICAL_COMPARE -Wno-tautological-compare)
ADD_CHECK_C_COMPILER_FLAG(CXX_WARNINGS CXX_WARN_NO_UNKNOWN_PRAGMAS -Wno-unknown-pragmas)
ADD_CHECK_C_COMPILER_FLAG(CXX_WARNINGS CXX_WARN_NO_CHAR_SUBSCRIPTS -Wno-char-subscripts)
ADD_CHECK_C_COMPILER_FLAG(CXX_WARNINGS CXX_WARN_NO_OVERLOADED_VIRTUAL -Wno-overloaded-virtual) # we get a lot of these, if its a problem a dev needs to look into it.
ADD_CHECK_CXX_COMPILER_FLAG(CXX_WARNINGS CXX_WARN_NO_INVALID_OFFSETOF -Wno-invalid-offsetof)
CMake now tests warnings are supported, GCC 4.0 wasn't working because of unsupported warnings. this can work for other compilers too, currently intel and gcc use this.
2010-12-16 09:55:35 +00:00
elseif(CMAKE_C_COMPILER_ID MATCHES "Intel")
fix for cmake flag detection, was not caching the resulting variable so the test ran each time. also cache SSE, SSE2 checks.
2010-12-21 03:32:51 +00:00
ADD_CHECK_C_COMPILER_FLAG(C_WARNINGS C_WARN_ALL -Wall)
ADD_CHECK_C_COMPILER_FLAG(C_WARNINGS C_WARN_POINTER_ARITH -Wpointer-arith)
ADD_CHECK_C_COMPILER_FLAG(C_WARNINGS C_WARN_NO_UNKNOWN_PRAGMAS -Wno-unknown-pragmas)
CMake now tests warnings are supported, GCC 4.0 wasn't working because of unsupported warnings. this can work for other compilers too, currently intel and gcc use this.
2010-12-16 09:55:35 +00:00
fix for cmake flag detection, was not caching the resulting variable so the test ran each time. also cache SSE, SSE2 checks.
2010-12-21 03:32:51 +00:00
ADD_CHECK_CXX_COMPILER_FLAG(CXX_WARNINGS CXX_WARN_ALL -Wall)
ADD_CHECK_CXX_COMPILER_FLAG(CXX_WARNINGS CXX_WARN_NO_INVALID_OFFSETOF -Wno-invalid-offsetof)
ADD_CHECK_CXX_COMPILER_FLAG(CXX_WARNINGS CXX_WARN_NO_SIGN_COMPARE -Wno-sign-compare)
CMake now tests warnings are supported, GCC 4.0 wasn't working because of unsupported warnings. this can work for other compilers too, currently intel and gcc use this.
2010-12-16 09:55:35 +00:00
fix [#28786] Large enum lists display columns in inverted order (right to left) also cleared annoying intel c++ warnings.
2011-10-01 21:09:42 +00:00
# disable numbered, false positives
set(C_WARNINGS "${C_WARNINGS} -wd188,186,144,913,556")
set(CXX_WARNINGS "${CXX_WARNINGS} -wd188,186,144,913,556")
use lowercase for cmake builtin names and macros, remove contents in else() and endif() which is no longer needed.
2010-12-08 08:43:06 +00:00
endif()
- fixed remaining unused warnings. - omit render code from this warning (cmake only), until render branch is merged. - moved -Wunused-parameter warning to apply to all C code in blender (not just ./source/blender), (cmake only).
2010-10-17 06:38:56 +00:00
disable opencollada and openexr for msvc2010, gives linking errors
2011-06-27 16:33:59 +00:00
# MSVC2010 fails to links C++ libs right
if(MSVC10)
if(WITH_IMAGE_OPENEXR)
message(WARNING "MSVC 2010 does not support OpenEXR, disabling WITH_IMAGE_OPENEXR. To enable support use Use MSVC 2008")
endif()
if(WITH_OPENCOLLADA)
message(WARNING "MSVC 2010 does not support OpenCollada, disabling WITH_OPENCOLLADA. To enable support use Use MSVC 2008")
endif()
endif()
print an error message if Python.h can't be found for cmake and scons since its such a common problem.
2011-07-16 06:55:45 +00:00
# ensure python header is found since detection can fail, this could happen
# with _any_ library but since we used a fixed python version this tends to
# be most problematic.
if(WITH_PYTHON)
if(NOT EXISTS "${PYTHON_INCLUDE_DIR}/Python.h")
message(FATAL_ERROR "Missing: \"${PYTHON_INCLUDE_DIR}/Python.h\",\n"
"Set the cache entry 'PYTHON_INCLUDE_DIR' to point "
"to a valid python include path. Containing "
"Python.h for python version \"${PYTHON_VERSION}\"")
endif()
WITH_PYTHON_INSTALL_NUMPY option for unix/cmake, just copies from site-packages.
2012-04-30 09:38:32 +00:00
cmake - improved detection of numpy, now works for typical ubuntu installation. numpy directory can be referenced manually with the advanced option PYTHON_NUMPY_PATH if needed.
2012-05-01 23:22:58 +00:00
if(WITH_PYTHON_INSTALL AND WITH_PYTHON_INSTALL_NUMPY)
# set but invalid
if(NOT ${PYTHON_NUMPY_PATH} STREQUAL "")
if(NOT EXISTS "${PYTHON_NUMPY_PATH}/numpy")
message(WARNING "PYTHON_NUMPY_PATH is invalid, numpy not found in '${PYTHON_NUMPY_PATH}' "
"WITH_PYTHON_INSTALL_NUMPY option will be ignored when installing python")
set(WITH_PYTHON_INSTALL_NUMPY OFF)
endif()
# not set, so initialize
else()
string(REPLACE "." ";" _PY_VER_SPLIT "${PYTHON_VERSION}")
list(GET _PY_VER_SPLIT 0 _PY_VER_MAJOR)
# re-cache
unset(PYTHON_NUMPY_PATH CACHE)
find_path(PYTHON_NUMPY_PATH
NAMES
numpy
HINTS
"${PYTHON_LIBPATH}/python${PYTHON_VERSION}/"
"${PYTHON_LIBPATH}/python${_PY_VER_MAJOR}/"
PATH_SUFFIXES
site-packages
dist-packages
code cleanup: BKE_scene api naming. also stop numpy from being found in /usr/include with cmake.
2012-05-05 14:33:36 +00:00
NO_DEFAULT_PATH
cmake - improved detection of numpy, now works for typical ubuntu installation. numpy directory can be referenced manually with the advanced option PYTHON_NUMPY_PATH if needed.
2012-05-01 23:22:58 +00:00
)
if(NOT EXISTS "${PYTHON_NUMPY_PATH}")
message(WARNING "'numpy' path could not be found in:\n"
"'${PYTHON_LIBPATH}/python${PYTHON_VERSION}/site-packages/numpy', "
"'${PYTHON_LIBPATH}/python${_PY_VER_MAJOR}/site-packages/numpy', "
"'${PYTHON_LIBPATH}/python${PYTHON_VERSION}/dist-packages/numpy', "
"'${PYTHON_LIBPATH}/python${_PY_VER_MAJOR}/dist-packages/numpy', "
"WITH_PYTHON_INSTALL_NUMPY option will be ignored when installing python")
set(WITH_PYTHON_INSTALL_NUMPY OFF)
else()
message(STATUS "numpy found at '${PYTHON_NUMPY_PATH}'")
endif()
unset(_PY_VER_SPLIT)
unset(_PY_VER_MAJOR)
WITH_PYTHON_INSTALL_NUMPY option for unix/cmake, just copies from site-packages.
2012-04-30 09:38:32 +00:00
endif()
endif()
print an error message if Python.h can't be found for cmake and scons since its such a common problem.
2011-07-16 06:55:45 +00:00
endif()
use lowercase for cmake builtin names and macros, remove contents in else() and endif() which is no longer needed.
2010-12-08 08:43:06 +00:00
set(CMAKE_C_FLAGS "${CMAKE_C_FLAGS} ${PLATFORM_CFLAGS} ${C_WARNINGS}")
set(CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} ${PLATFORM_CFLAGS} ${CXX_WARNINGS}")
Merge from trunk -r 22040:23000.
2009-10-19 16:20:12 +00:00
Experimental option to build blender as a python module, rather then blender embedding python. CMake build option WITH_PYTHON_MODULE, will build ./bin/bpy.so This allows 'bpy' to be imported from python or other applications/IDE's which embed python, eg: python -c "import bpy ; bpy.ops.render.render(write_still=True)" This runs in background mode and has similar restrictions to running a script: blender --background --python test.py TODO: - install to site-packages with blender scripts - add support for imp.reload()
2011-02-20 23:39:29 +00:00
#-------------------------------------------------------------------------------
# Global Defines
fix for option WITH_CXX_GUARDEDALLOC with msvc
2011-05-24 06:44:39 +00:00
# better not set includes here but this debugging option is off by default.
use lowercase for cmake builtin names and macros, remove contents in else() and endif() which is no longer needed.
2010-12-08 08:43:06 +00:00
if(WITH_CXX_GUARDEDALLOC)
fix for option WITH_CXX_GUARDEDALLOC with msvc
2011-05-24 06:44:39 +00:00
include_directories(${CMAKE_SOURCE_DIR}/intern/guardedalloc)
more guardedalloc use in C++, also make compositorMutex a static var, was allocated and never freed.
2012-06-25 10:35:24 +00:00
add_definitions(-DWITH_CXX_GUARDEDALLOC)
use lowercase for cmake builtin names and macros, remove contents in else() and endif() which is no longer needed.
2010-12-08 08:43:06 +00:00
endif()
CMake lists initial submission. Documentationand further verification for different platforms will follow soon. This was just tested against current CVS on MSVC 2005 with Verse, QuickTime, OpenEXR, Player all on.
2006-11-17 02:27:12 +00:00
BKE_assert(), only prints the error unless cmake define WITH_ASSERT_ABORT is enabled and it will call abort(). made this option advanced so people don't enable along with other features.
2010-12-15 10:22:26 +00:00
if(WITH_ASSERT_ABORT)
add_definitions(-DWITH_ASSERT_ABORT)
endif()
last commit to fix warnings didnt set them at all, not it works as it should. also made cmakes output a lot quieter, messages can be uncommented for debugging or added back if other devs need this for some reason.
2010-12-16 12:48:30 +00:00
# message(STATUS "Using CFLAGS: ${CMAKE_C_FLAGS}")
# message(STATUS "Using CXXFLAGS: ${CMAKE_CXX_FLAGS}")
CMake lists initial submission. Documentationand further verification for different platforms will follow soon. This was just tested against current CVS on MSVC 2005 with Verse, QuickTime, OpenEXR, Player all on.
2006-11-17 02:27:12 +00:00
#-----------------------------------------------------------------------------
# Libraries
CMake: use a global list to store libraries built rather then cmake_blender_libs.txt file.
2010-12-06 10:56:37 +00:00
use lowercase for cmake builtin names and macros, remove contents in else() and endif() which is no longer needed.
2010-12-08 08:43:06 +00:00
add_subdirectory(source)
add_subdirectory(intern)
add_subdirectory(extern)
CMake lists initial submission. Documentationand further verification for different platforms will follow soon. This was just tested against current CVS on MSVC 2005 with Verse, QuickTime, OpenEXR, Player all on.
2006-11-17 02:27:12 +00:00
#-----------------------------------------------------------------------------
# Blender Application
Advanced CMake option to build the player without blender: WITH_BLENDER
2011-07-13 08:15:06 +00:00
if(WITH_BLENDER)
add_subdirectory(source/creator)
endif()
CMake lists initial submission. Documentationand further verification for different platforms will follow soon. This was just tested against current CVS on MSVC 2005 with Verse, QuickTime, OpenEXR, Player all on.
2006-11-17 02:27:12 +00:00
Patch 17508: Blender Web Plugin - XEmbed. Enable XEmbed integration of blenderplayer, using -i as input parameter to pass embedder window id. create a minimal web plugin to embed blenderplayer on web pages (using gecko/mozilla as browser). Only for *nix.
2008-09-09 21:15:30 +00:00
CMake lists initial submission. Documentationand further verification for different platforms will follow soon. This was just tested against current CVS on MSVC 2005 with Verse, QuickTime, OpenEXR, Player all on.
2006-11-17 02:27:12 +00:00
#-----------------------------------------------------------------------------
# Blender Player
use lowercase for cmake builtin names and macros, remove contents in else() and endif() which is no longer needed.
2010-12-08 08:43:06 +00:00
if(WITH_PLAYER)
add_subdirectory(source/blenderplayer)
endif()
CPack packaging support from Dan Eicher, tested to build redhat RPM's, a Mac bundle also defined.
2011-02-15 18:33:05 +00:00
#-----------------------------------------------------------------------------
# CPack for generating packages
include(build_files/cmake/packaging.cmake)
since cmake new auto-detects many features, print a summery of the configuration on first run.
2011-06-19 13:49:20 +00:00
#-----------------------------------------------------------------------------
# Print Final Configuration
if(FIRST_RUN)
set(_config_msg "\n* Blender Configuration *")
macro(info_cfg_option
_setting)
set(_msg " * ${_setting}")
string(LENGTH "${_msg}" _len)
WITH_PYTHON_INSTALL_NUMPY option for unix/cmake, just copies from site-packages.
2012-04-30 09:38:32 +00:00
while("32" GREATER "${_len}")
since cmake new auto-detects many features, print a summery of the configuration on first run.
2011-06-19 13:49:20 +00:00
set(_msg "${_msg} ")
math(EXPR _len "${_len} + 1")
endwhile()
set(_config_msg "${_config_msg}\n${_msg}${${_setting}}")
endmacro()
macro(info_cfg_text
_text)
set(_config_msg "${_config_msg}\n\n ${_text}")
formatting edits only
2011-09-30 15:51:58 +00:00
since cmake new auto-detects many features, print a summery of the configuration on first run.
2011-06-19 13:49:20 +00:00
endmacro()
info_cfg_text("Build Options:")
info_cfg_option(WITH_GAMEENGINE)
info_cfg_option(WITH_PLAYER)
info_cfg_option(WITH_BULLET)
info_cfg_option(WITH_IK_ITASC)
info_cfg_option(WITH_OPENCOLLADA)
info_cfg_option(WITH_FFTW3)
info_cfg_option(WITH_INTERNATIONAL)
more cmake/x11 edits - added includes for spnav - added FindSpacenav.cmake which allows using spacenav from a nonstandard path. - remove NDOF_LIBPATH, use a full library path instead.
2011-08-02 06:32:53 +00:00
info_cfg_option(WITH_INPUT_NDOF)
Cycles: svn merge -r41613:41627 ^/trunk/blender
2011-11-07 17:13:32 +00:00
info_cfg_option(WITH_CYCLES)
since cmake new auto-detects many features, print a summery of the configuration on first run.
2011-06-19 13:49:20 +00:00
info_cfg_text("Compiler Options:")
info_cfg_option(WITH_BUILDINFO)
info_cfg_option(WITH_OPENMP)
info_cfg_option(WITH_RAYOPTIMIZATION)
info_cfg_text("System Options:")
info_cfg_option(WITH_INSTALL_PORTABLE)
Mode switching for GHOST under X11: adds the ability to change screen resolutions in the blenderplayer on GNU/Linux. Code ported from Quake 2.
2012-01-02 12:25:14 +00:00
info_cfg_option(WITH_X11_XF86VMODE)
since cmake new auto-detects many features, print a summery of the configuration on first run.
2011-06-19 13:49:20 +00:00
info_cfg_option(WITH_X11_XINPUT)
cmake/mingw now builds with default configuration (needed to disable tiff/exr/cycles)
2012-04-12 05:34:17 +00:00
info_cfg_option(WITH_MEM_JEMALLOC)
add cmake option WITH_SYSTEM_OPENJPEG so linux can build cycles without having libopenjpeg installed.
2012-06-23 14:23:44 +00:00
info_cfg_option(WITH_SYSTEM_GLEW)
info_cfg_option(WITH_SYSTEM_OPENJPEG)
since cmake new auto-detects many features, print a summery of the configuration on first run.
2011-06-19 13:49:20 +00:00
info_cfg_text("Image Formats:")
info_cfg_option(WITH_IMAGE_CINEON)
info_cfg_option(WITH_IMAGE_DDS)
info_cfg_option(WITH_IMAGE_HDR)
info_cfg_option(WITH_IMAGE_OPENEXR)
info_cfg_option(WITH_IMAGE_OPENJPEG)
info_cfg_option(WITH_IMAGE_REDCODE)
info_cfg_option(WITH_IMAGE_TIFF)
info_cfg_text("Audio:")
info_cfg_option(WITH_OPENAL)
info_cfg_option(WITH_SDL)
info_cfg_option(WITH_JACK)
info_cfg_option(WITH_CODEC_FFMPEG)
info_cfg_option(WITH_CODEC_SNDFILE)
info_cfg_text("Compression:")
info_cfg_option(WITH_LZMA)
info_cfg_option(WITH_LZO)
info_cfg_text("Python:")
info_cfg_option(WITH_PYTHON_INSTALL)
WITH_PYTHON_INSTALL_NUMPY option for unix/cmake, just copies from site-packages.
2012-04-30 09:38:32 +00:00
info_cfg_option(WITH_PYTHON_INSTALL_NUMPY)
since cmake new auto-detects many features, print a summery of the configuration on first run.
2011-06-19 13:49:20 +00:00
info_cfg_option(WITH_PYTHON_MODULE)
info_cfg_option(WITH_PYTHON_SAFETY)
info_cfg_text("Modifiers:")
info_cfg_option(WITH_MOD_BOOLEAN)
option to build without remesh modifier for cmake and scons
2011-12-31 03:34:44 +00:00
info_cfg_option(WITH_MOD_REMESH)
since cmake new auto-detects many features, print a summery of the configuration on first run.
2011-06-19 13:49:20 +00:00
info_cfg_option(WITH_MOD_DECIMATE)
info_cfg_option(WITH_MOD_FLUID)
rename cmake WITH_OCEANSIM --> WITH_MOD_OCEANSIM and tag CYCLES_CUDA_BINARIES_ARCH as advanced.
2011-11-13 14:16:43 +00:00
info_cfg_option(WITH_MOD_OCEANSIM)
since cmake new auto-detects many features, print a summery of the configuration on first run.
2011-06-19 13:49:20 +00:00
info_cfg_text("")
message("${_config_msg}")
endif()
Copy Permalink