blender/release/scripts/startup/bl_operators/uvcalc_follow_active.py

# ##### BEGIN GPL LICENSE BLOCK #####
#
#  This program is free software; you can redistribute it and/or
#  modify it under the terms of the GNU General Public License
#  as published by the Free Software Foundation; either version 2
#  of the License, or (at your option) any later version.
#
#  This program is distributed in the hope that it will be useful,
#  but WITHOUT ANY WARRANTY; without even the implied warranty of
#  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
#  GNU General Public License for more details.
#
#  You should have received a copy of the GNU General Public License
#  along with this program; if not, write to the Free Software Foundation,
#  Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
#
# ##### END GPL LICENSE BLOCK #####

# <pep8 compliant>

#for full docs see...
# http://mediawiki.blender.org/index.php/Scripts/Manual/UV_Calculate/Follow_active_quads

import bpy
from bpy.types import Operator


def extend(obj, operator, EXTEND_MODE):
    from bpy_extras import mesh_utils

    me = obj.data
    me_verts = me.vertices

    # script will fail without UVs
    if not me.uv_textures:
        me.uv_textures.new()

    # Toggle Edit mode
    is_editmode = (obj.mode == 'EDIT')
    if is_editmode:
        bpy.ops.object.mode_set(mode='OBJECT')

    #t = sys.time()
    edge_average_lengths = {}

    OTHER_INDEX = 2, 3, 0, 1

    def extend_uvs(face_source, face_target, edge_key):
        """
        Takes 2 faces,
        Projects its extends its UV coords onto the face next to it.
        Both faces must share an edge
        """

        def face_edge_vs(vi):
            vlen = len(vi)
            return [(vi[i], vi[(i + 1) % vlen]) for i in range(vlen)]

        vidx_source = face_source.vertices
        vidx_target = face_target.vertices

        uv_layer = me.uv_layers.active.data
        uvs_source = [uv_layer[i].uv for i in face_source.loop_indices]
        uvs_target = [uv_layer[i].uv for i in face_target.loop_indices]

        # vertex index is the key, uv is the value

        uvs_vhash_source = {vindex: uvs_source[i] for i, vindex in enumerate(vidx_source)}

        uvs_vhash_target = {vindex: uvs_target[i] for i, vindex in enumerate(vidx_target)}

        edge_idxs_source = face_edge_vs(vidx_source)
        edge_idxs_target = face_edge_vs(vidx_target)

        source_matching_edge = -1
        target_matching_edge = -1

        edge_key_swap = edge_key[1], edge_key[0]

        try:
            source_matching_edge = edge_idxs_source.index(edge_key)
        except:
            source_matching_edge = edge_idxs_source.index(edge_key_swap)
        try:
            target_matching_edge = edge_idxs_target.index(edge_key)
        except:
            target_matching_edge = edge_idxs_target.index(edge_key_swap)

        edgepair_inner_source = edge_idxs_source[source_matching_edge]
        edgepair_inner_target = edge_idxs_target[target_matching_edge]
        edgepair_outer_source = edge_idxs_source[OTHER_INDEX[source_matching_edge]]
        edgepair_outer_target = edge_idxs_target[OTHER_INDEX[target_matching_edge]]

        if edge_idxs_source[source_matching_edge] == edge_idxs_target[target_matching_edge]:
            iA = 0  # Flipped, most common
            iB = 1
        else:  # The normals of these faces must be different
            iA = 1
            iB = 0

        # Set the target UV's touching source face, no tricky calculations needed,
        uvs_vhash_target[edgepair_inner_target[0]][:] = uvs_vhash_source[edgepair_inner_source[iA]]
        uvs_vhash_target[edgepair_inner_target[1]][:] = uvs_vhash_source[edgepair_inner_source[iB]]

        # Set the 2 UV's on the target face that are not touching
        # for this we need to do basic expanding on the source faces UV's
        if EXTEND_MODE == 'LENGTH':

            try:  # divide by zero is possible
                '''
                measure the length of each face from the middle of each edge to the opposite
                along the axis we are copying, use this
                '''
                i1a = edgepair_outer_target[iB]
                i2a = edgepair_inner_target[iA]
                if i1a > i2a:
                    i1a, i2a = i2a, i1a

                i1b = edgepair_outer_source[iB]
                i2b = edgepair_inner_source[iA]
                if i1b > i2b:
                    i1b, i2b = i2b, i1b
                # print edge_average_lengths
                factor = edge_average_lengths[i1a, i2a][0] / edge_average_lengths[i1b, i2b][0]
            except:
                # Div By Zero?
                factor = 1.0

            uvs_vhash_target[edgepair_outer_target[iB]][:] = uvs_vhash_source[edgepair_inner_source[0]] + factor * (uvs_vhash_source[edgepair_inner_source[0]] - uvs_vhash_source[edgepair_outer_source[1]])
            uvs_vhash_target[edgepair_outer_target[iA]][:] = uvs_vhash_source[edgepair_inner_source[1]] + factor * (uvs_vhash_source[edgepair_inner_source[1]] - uvs_vhash_source[edgepair_outer_source[0]])

        else:
            # same as above but with no factors
            uvs_vhash_target[edgepair_outer_target[iB]][:] = uvs_vhash_source[edgepair_inner_source[0]] + (uvs_vhash_source[edgepair_inner_source[0]] - uvs_vhash_source[edgepair_outer_source[1]])
            uvs_vhash_target[edgepair_outer_target[iA]][:] = uvs_vhash_source[edgepair_inner_source[1]] + (uvs_vhash_source[edgepair_inner_source[1]] - uvs_vhash_source[edgepair_outer_source[0]])

    face_act = me.polygons.active
    if face_act == -1:
        operator.report({'ERROR'}, "No active face")
        return

    face_sel = [f for f in me.polygons if len(f.vertices) == 4 and f.select]

    face_act_local_index = -1
    for i, f in enumerate(face_sel):
        if f.index == face_act:
            face_act_local_index = i
            break

    if face_act_local_index == -1:
        operator.report({'ERROR'}, "Active face not selected")
        return

    # Modes
    # 0 not yet searched for.
    # 1:mapped, use search from this face - removed!
    # 2:all siblings have been searched. don't search again.
    face_modes = [0] * len(face_sel)
    face_modes[face_act_local_index] = 1  # extend UV's from this face.

    # Edge connectivity
    edge_faces = {}
    for i, f in enumerate(face_sel):
        for edkey in f.edge_keys:
            try:
                edge_faces[edkey].append(i)
            except:
                edge_faces[edkey] = [i]

    if EXTEND_MODE == 'LENGTH':
        edge_loops = mesh_utils.edge_loops_from_tessfaces(me, face_sel, [ed.key for ed in me.edges if ed.use_seam])
        me_verts = me.vertices
        for loop in edge_loops:
            looplen = [0.0]
            for ed in loop:
                edge_average_lengths[ed] = looplen
                looplen[0] += (me_verts[ed[0]].co - me_verts[ed[1]].co).length
            looplen[0] = looplen[0] / len(loop)

    # remove seams, so we don't map across seams.
    for ed in me.edges:
        if ed.use_seam:
            # remove the edge pair if we can
            try:
                del edge_faces[ed.key]
            except:
                pass
    # Done finding seams

    # face connectivity - faces around each face
    # only store a list of indices for each face.
    face_faces = [[] for i in range(len(face_sel))]

    for edge_key, faces in edge_faces.items():
        if len(faces) == 2:  # Only do edges with 2 face users for now
            face_faces[faces[0]].append((faces[1], edge_key))
            face_faces[faces[1]].append((faces[0], edge_key))

    # Now we know what face is connected to what other face, map them by connectivity
    ok = True
    while ok:
        ok = False
        for i in range(len(face_sel)):
            if face_modes[i] == 1:  # searchable
                for f_sibling, edge_key in face_faces[i]:
                    if face_modes[f_sibling] == 0:
                        face_modes[f_sibling] = 1  # mapped and search from.
                        extend_uvs(face_sel[i], face_sel[f_sibling], edge_key)
                        face_modes[i] = 1  # we can map from this one now.
                        ok = True  # keep searching

                face_modes[i] = 2  # don't search again

    if is_editmode:
        bpy.ops.object.mode_set(mode='EDIT')
    else:
        me.update_tag()


def main(context, operator):
    obj = context.active_object

    extend(obj, operator, operator.properties.mode)


class FollowActiveQuads(Operator):
    """Follow UVs from active quads along continuous face loops"""
    bl_idname = "uv.follow_active_quads"
    bl_label = "Follow Active Quads"
    bl_options = {'REGISTER', 'UNDO'}

    mode = bpy.props.EnumProperty(
            name="Edge Length Mode",
            description="Method to space UV edge loops",
            items=(('EVEN', "Even", "Space all UVs evently"),
                   ('LENGTH', "Length", "Average space UVs edge length of each loop")),
            default='LENGTH',
            )

    @classmethod
    def poll(cls, context):
        obj = context.active_object
        return (obj is not None and obj.type == 'MESH')

    def execute(self, context):
        main(context, self)
        return {'FINISHED'}

    def invoke(self, context, event):
        wm = context.window_manager
        return wm.invoke_props_dialog(self)