2011-10-23 17:52:20 +00:00
|
|
|
/*
|
VideoTexture module.
The only compilation system that works for sure is the MSVC project files. I've tried my best to
update the other compilation system but I count on the community to check and fix them.
This is Zdeno Miklas video texture plugin ported to trunk.
The original plugin API is maintained (can be found here http://home.scarlet.be/~tsi46445/blender/blendVideoTex.html)
EXCEPT for the following:
The module name is changed to VideoTexture (instead of blendVideoTex).
A new (and only) video source is now available: VideoFFmpeg()
You must pass 1 to 4 arguments when you create it (you can use named arguments):
VideoFFmpeg(file) : play a video file
VideoFFmpeg(file, capture, rate, width, height) : start a live video capture
file:
In the first form, file is a video file name, relative to startup directory.
It can also be a URL, FFmpeg will happily stream a video from a network source.
In the second form, file is empty or is a hint for the format of the video capture.
In Windows, file is ignored and should be empty or not specified.
In Linux, ffmpeg supports two types of device: VideoForLinux and DV1394.
The user specifies the type of device with the file parameter:
[<device_type>][:<standard>]
<device_type> : 'v4l' for VideoForLinux, 'dv1394' for DV1394; default to 'v4l'
<standard> : 'pal', 'secam' or 'ntsc', default to 'ntsc'
The driver name is constructed automatically from the device types:
v4l : /dev/video<capture>
dv1394: /dev/dv1394/<capture>
If you have different driver name, you can specify the driver name explicitely
instead of device type. Examples of valid file parameter:
/dev/v4l/video0:pal
/dev/ieee1394/1:ntsc
dv1394:ntsc
v4l:pal
:secam
capture:
Defines the index number of the capture source, starting from 0. The first capture device is always 0.
The VideoTexutre modules knows that you want to start a live video capture when you set this parameter to a number >= 0. Setting this parameter < 0 indicates a video file playback. Default value is -1.
rate:
the capture frame rate, by default 25 frames/sec
width:
height:
Width and height of the video capture in pixel, default value 0.
In Windows you must specify these values and they must fit with the capture device capability.
For example, if you have a webcam that can capture at 160x120, 320x240 or 640x480,
you must specify one of these couple of values or the opening of the video source will fail.
In Linux, default values are provided by the VideoForLinux driver if you don't specify width and height.
Simple example
**************
1. Texture definition script:
import VideoTexture
contr = GameLogic.getCurrentController()
obj = contr.getOwner()
if not hasattr(GameLogic, 'video'):
matID = VideoTexture.materialID(obj, 'MAVideoMat')
GameLogic.video = VideoTexture.Texture(obj, matID)
GameLogic.vidSrc = VideoTexture.VideoFFmpeg('trailer_400p.ogg')
# Streaming is also possible:
#GameLogic.vidSrc = VideoTexture.VideoFFmpeg('http://10.32.1.10/trailer_400p.ogg')
GameLogic.vidSrc.repeat = -1
# If the video dimensions are not a power of 2, scaling must be done before
# sending the texture to the GPU. This is done by default with gluScaleImage()
# but you can also use a faster, but less precise, scaling by setting scale
# to True. Best approach is to convert the video offline and set the dimensions right.
GameLogic.vidSrc.scale = True
# FFmpeg always delivers the video image upside down, so flipping is enabled automatically
#GameLogic.vidSrc.flip = True
if contr.getSensors()[0].isPositive():
GameLogic.video.source = GameLogic.vidSrc
GameLogic.vidSrc.play()
2. Texture refresh script:
obj = GameLogic.getCurrentController().getOwner()
if hasattr(GameLogic, 'video') != 0:
GameLogic.video.refresh(True)
You can download this demo here:
http://home.scarlet.be/~tsi46445/blender/VideoTextureDemo.blend
http://home.scarlet.be/~tsi46445/blender/trailer_400p.ogg
2008-10-31 22:35:52 +00:00
|
|
|
-----------------------------------------------------------------------------
|
|
|
|
This source file is part of VideoTexture library
|
|
|
|
|
|
|
|
Copyright (c) 2007 The Zdeno Ash Miklas
|
|
|
|
|
|
|
|
This program is free software; you can redistribute it and/or modify it under
|
|
|
|
the terms of the GNU Lesser General Public License as published by the Free Software
|
|
|
|
Foundation; either version 2 of the License, or (at your option) any later
|
|
|
|
version.
|
|
|
|
|
|
|
|
This program is distributed in the hope that it will be useful, but WITHOUT
|
|
|
|
ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS
|
|
|
|
FOR A PARTICULAR PURPOSE. See the GNU Lesser General Public License for more details.
|
|
|
|
|
|
|
|
You should have received a copy of the GNU Lesser General Public License along with
|
|
|
|
this program; if not, write to the Free Software Foundation, Inc., 59 Temple
|
|
|
|
Place - Suite 330, Boston, MA 02111-1307, USA, or go to
|
|
|
|
http://www.gnu.org/copyleft/lesser.txt.
|
|
|
|
-----------------------------------------------------------------------------
|
|
|
|
*/
|
|
|
|
|
2011-10-23 17:52:20 +00:00
|
|
|
/** \file gameengine/VideoTexture/Texture.cpp
|
|
|
|
* \ingroup bgevideotex
|
|
|
|
*/
|
|
|
|
|
VideoTexture module.
The only compilation system that works for sure is the MSVC project files. I've tried my best to
update the other compilation system but I count on the community to check and fix them.
This is Zdeno Miklas video texture plugin ported to trunk.
The original plugin API is maintained (can be found here http://home.scarlet.be/~tsi46445/blender/blendVideoTex.html)
EXCEPT for the following:
The module name is changed to VideoTexture (instead of blendVideoTex).
A new (and only) video source is now available: VideoFFmpeg()
You must pass 1 to 4 arguments when you create it (you can use named arguments):
VideoFFmpeg(file) : play a video file
VideoFFmpeg(file, capture, rate, width, height) : start a live video capture
file:
In the first form, file is a video file name, relative to startup directory.
It can also be a URL, FFmpeg will happily stream a video from a network source.
In the second form, file is empty or is a hint for the format of the video capture.
In Windows, file is ignored and should be empty or not specified.
In Linux, ffmpeg supports two types of device: VideoForLinux and DV1394.
The user specifies the type of device with the file parameter:
[<device_type>][:<standard>]
<device_type> : 'v4l' for VideoForLinux, 'dv1394' for DV1394; default to 'v4l'
<standard> : 'pal', 'secam' or 'ntsc', default to 'ntsc'
The driver name is constructed automatically from the device types:
v4l : /dev/video<capture>
dv1394: /dev/dv1394/<capture>
If you have different driver name, you can specify the driver name explicitely
instead of device type. Examples of valid file parameter:
/dev/v4l/video0:pal
/dev/ieee1394/1:ntsc
dv1394:ntsc
v4l:pal
:secam
capture:
Defines the index number of the capture source, starting from 0. The first capture device is always 0.
The VideoTexutre modules knows that you want to start a live video capture when you set this parameter to a number >= 0. Setting this parameter < 0 indicates a video file playback. Default value is -1.
rate:
the capture frame rate, by default 25 frames/sec
width:
height:
Width and height of the video capture in pixel, default value 0.
In Windows you must specify these values and they must fit with the capture device capability.
For example, if you have a webcam that can capture at 160x120, 320x240 or 640x480,
you must specify one of these couple of values or the opening of the video source will fail.
In Linux, default values are provided by the VideoForLinux driver if you don't specify width and height.
Simple example
**************
1. Texture definition script:
import VideoTexture
contr = GameLogic.getCurrentController()
obj = contr.getOwner()
if not hasattr(GameLogic, 'video'):
matID = VideoTexture.materialID(obj, 'MAVideoMat')
GameLogic.video = VideoTexture.Texture(obj, matID)
GameLogic.vidSrc = VideoTexture.VideoFFmpeg('trailer_400p.ogg')
# Streaming is also possible:
#GameLogic.vidSrc = VideoTexture.VideoFFmpeg('http://10.32.1.10/trailer_400p.ogg')
GameLogic.vidSrc.repeat = -1
# If the video dimensions are not a power of 2, scaling must be done before
# sending the texture to the GPU. This is done by default with gluScaleImage()
# but you can also use a faster, but less precise, scaling by setting scale
# to True. Best approach is to convert the video offline and set the dimensions right.
GameLogic.vidSrc.scale = True
# FFmpeg always delivers the video image upside down, so flipping is enabled automatically
#GameLogic.vidSrc.flip = True
if contr.getSensors()[0].isPositive():
GameLogic.video.source = GameLogic.vidSrc
GameLogic.vidSrc.play()
2. Texture refresh script:
obj = GameLogic.getCurrentController().getOwner()
if hasattr(GameLogic, 'video') != 0:
GameLogic.video.refresh(True)
You can download this demo here:
http://home.scarlet.be/~tsi46445/blender/VideoTextureDemo.blend
http://home.scarlet.be/~tsi46445/blender/trailer_400p.ogg
2008-10-31 22:35:52 +00:00
|
|
|
// implementation
|
|
|
|
|
2012-06-16 20:20:07 +00:00
|
|
|
#include "PyObjectPlus.h"
|
VideoTexture module.
The only compilation system that works for sure is the MSVC project files. I've tried my best to
update the other compilation system but I count on the community to check and fix them.
This is Zdeno Miklas video texture plugin ported to trunk.
The original plugin API is maintained (can be found here http://home.scarlet.be/~tsi46445/blender/blendVideoTex.html)
EXCEPT for the following:
The module name is changed to VideoTexture (instead of blendVideoTex).
A new (and only) video source is now available: VideoFFmpeg()
You must pass 1 to 4 arguments when you create it (you can use named arguments):
VideoFFmpeg(file) : play a video file
VideoFFmpeg(file, capture, rate, width, height) : start a live video capture
file:
In the first form, file is a video file name, relative to startup directory.
It can also be a URL, FFmpeg will happily stream a video from a network source.
In the second form, file is empty or is a hint for the format of the video capture.
In Windows, file is ignored and should be empty or not specified.
In Linux, ffmpeg supports two types of device: VideoForLinux and DV1394.
The user specifies the type of device with the file parameter:
[<device_type>][:<standard>]
<device_type> : 'v4l' for VideoForLinux, 'dv1394' for DV1394; default to 'v4l'
<standard> : 'pal', 'secam' or 'ntsc', default to 'ntsc'
The driver name is constructed automatically from the device types:
v4l : /dev/video<capture>
dv1394: /dev/dv1394/<capture>
If you have different driver name, you can specify the driver name explicitely
instead of device type. Examples of valid file parameter:
/dev/v4l/video0:pal
/dev/ieee1394/1:ntsc
dv1394:ntsc
v4l:pal
:secam
capture:
Defines the index number of the capture source, starting from 0. The first capture device is always 0.
The VideoTexutre modules knows that you want to start a live video capture when you set this parameter to a number >= 0. Setting this parameter < 0 indicates a video file playback. Default value is -1.
rate:
the capture frame rate, by default 25 frames/sec
width:
height:
Width and height of the video capture in pixel, default value 0.
In Windows you must specify these values and they must fit with the capture device capability.
For example, if you have a webcam that can capture at 160x120, 320x240 or 640x480,
you must specify one of these couple of values or the opening of the video source will fail.
In Linux, default values are provided by the VideoForLinux driver if you don't specify width and height.
Simple example
**************
1. Texture definition script:
import VideoTexture
contr = GameLogic.getCurrentController()
obj = contr.getOwner()
if not hasattr(GameLogic, 'video'):
matID = VideoTexture.materialID(obj, 'MAVideoMat')
GameLogic.video = VideoTexture.Texture(obj, matID)
GameLogic.vidSrc = VideoTexture.VideoFFmpeg('trailer_400p.ogg')
# Streaming is also possible:
#GameLogic.vidSrc = VideoTexture.VideoFFmpeg('http://10.32.1.10/trailer_400p.ogg')
GameLogic.vidSrc.repeat = -1
# If the video dimensions are not a power of 2, scaling must be done before
# sending the texture to the GPU. This is done by default with gluScaleImage()
# but you can also use a faster, but less precise, scaling by setting scale
# to True. Best approach is to convert the video offline and set the dimensions right.
GameLogic.vidSrc.scale = True
# FFmpeg always delivers the video image upside down, so flipping is enabled automatically
#GameLogic.vidSrc.flip = True
if contr.getSensors()[0].isPositive():
GameLogic.video.source = GameLogic.vidSrc
GameLogic.vidSrc.play()
2. Texture refresh script:
obj = GameLogic.getCurrentController().getOwner()
if hasattr(GameLogic, 'video') != 0:
GameLogic.video.refresh(True)
You can download this demo here:
http://home.scarlet.be/~tsi46445/blender/VideoTextureDemo.blend
http://home.scarlet.be/~tsi46445/blender/trailer_400p.ogg
2008-10-31 22:35:52 +00:00
|
|
|
#include <structmember.h>
|
|
|
|
|
2012-06-16 20:20:07 +00:00
|
|
|
#include "KX_GameObject.h"
|
|
|
|
#include "KX_Light.h"
|
|
|
|
#include "RAS_MeshObject.h"
|
|
|
|
#include "DNA_mesh_types.h"
|
|
|
|
#include "DNA_meshdata_types.h"
|
|
|
|
#include "DNA_image_types.h"
|
|
|
|
#include "IMB_imbuf_types.h"
|
|
|
|
#include "KX_PolygonMaterial.h"
|
VideoTexture module.
The only compilation system that works for sure is the MSVC project files. I've tried my best to
update the other compilation system but I count on the community to check and fix them.
This is Zdeno Miklas video texture plugin ported to trunk.
The original plugin API is maintained (can be found here http://home.scarlet.be/~tsi46445/blender/blendVideoTex.html)
EXCEPT for the following:
The module name is changed to VideoTexture (instead of blendVideoTex).
A new (and only) video source is now available: VideoFFmpeg()
You must pass 1 to 4 arguments when you create it (you can use named arguments):
VideoFFmpeg(file) : play a video file
VideoFFmpeg(file, capture, rate, width, height) : start a live video capture
file:
In the first form, file is a video file name, relative to startup directory.
It can also be a URL, FFmpeg will happily stream a video from a network source.
In the second form, file is empty or is a hint for the format of the video capture.
In Windows, file is ignored and should be empty or not specified.
In Linux, ffmpeg supports two types of device: VideoForLinux and DV1394.
The user specifies the type of device with the file parameter:
[<device_type>][:<standard>]
<device_type> : 'v4l' for VideoForLinux, 'dv1394' for DV1394; default to 'v4l'
<standard> : 'pal', 'secam' or 'ntsc', default to 'ntsc'
The driver name is constructed automatically from the device types:
v4l : /dev/video<capture>
dv1394: /dev/dv1394/<capture>
If you have different driver name, you can specify the driver name explicitely
instead of device type. Examples of valid file parameter:
/dev/v4l/video0:pal
/dev/ieee1394/1:ntsc
dv1394:ntsc
v4l:pal
:secam
capture:
Defines the index number of the capture source, starting from 0. The first capture device is always 0.
The VideoTexutre modules knows that you want to start a live video capture when you set this parameter to a number >= 0. Setting this parameter < 0 indicates a video file playback. Default value is -1.
rate:
the capture frame rate, by default 25 frames/sec
width:
height:
Width and height of the video capture in pixel, default value 0.
In Windows you must specify these values and they must fit with the capture device capability.
For example, if you have a webcam that can capture at 160x120, 320x240 or 640x480,
you must specify one of these couple of values or the opening of the video source will fail.
In Linux, default values are provided by the VideoForLinux driver if you don't specify width and height.
Simple example
**************
1. Texture definition script:
import VideoTexture
contr = GameLogic.getCurrentController()
obj = contr.getOwner()
if not hasattr(GameLogic, 'video'):
matID = VideoTexture.materialID(obj, 'MAVideoMat')
GameLogic.video = VideoTexture.Texture(obj, matID)
GameLogic.vidSrc = VideoTexture.VideoFFmpeg('trailer_400p.ogg')
# Streaming is also possible:
#GameLogic.vidSrc = VideoTexture.VideoFFmpeg('http://10.32.1.10/trailer_400p.ogg')
GameLogic.vidSrc.repeat = -1
# If the video dimensions are not a power of 2, scaling must be done before
# sending the texture to the GPU. This is done by default with gluScaleImage()
# but you can also use a faster, but less precise, scaling by setting scale
# to True. Best approach is to convert the video offline and set the dimensions right.
GameLogic.vidSrc.scale = True
# FFmpeg always delivers the video image upside down, so flipping is enabled automatically
#GameLogic.vidSrc.flip = True
if contr.getSensors()[0].isPositive():
GameLogic.video.source = GameLogic.vidSrc
GameLogic.vidSrc.play()
2. Texture refresh script:
obj = GameLogic.getCurrentController().getOwner()
if hasattr(GameLogic, 'video') != 0:
GameLogic.video.refresh(True)
You can download this demo here:
http://home.scarlet.be/~tsi46445/blender/VideoTextureDemo.blend
http://home.scarlet.be/~tsi46445/blender/trailer_400p.ogg
2008-10-31 22:35:52 +00:00
|
|
|
|
2012-06-16 20:20:07 +00:00
|
|
|
#include "MEM_guardedalloc.h"
|
VideoTexture module.
The only compilation system that works for sure is the MSVC project files. I've tried my best to
update the other compilation system but I count on the community to check and fix them.
This is Zdeno Miklas video texture plugin ported to trunk.
The original plugin API is maintained (can be found here http://home.scarlet.be/~tsi46445/blender/blendVideoTex.html)
EXCEPT for the following:
The module name is changed to VideoTexture (instead of blendVideoTex).
A new (and only) video source is now available: VideoFFmpeg()
You must pass 1 to 4 arguments when you create it (you can use named arguments):
VideoFFmpeg(file) : play a video file
VideoFFmpeg(file, capture, rate, width, height) : start a live video capture
file:
In the first form, file is a video file name, relative to startup directory.
It can also be a URL, FFmpeg will happily stream a video from a network source.
In the second form, file is empty or is a hint for the format of the video capture.
In Windows, file is ignored and should be empty or not specified.
In Linux, ffmpeg supports two types of device: VideoForLinux and DV1394.
The user specifies the type of device with the file parameter:
[<device_type>][:<standard>]
<device_type> : 'v4l' for VideoForLinux, 'dv1394' for DV1394; default to 'v4l'
<standard> : 'pal', 'secam' or 'ntsc', default to 'ntsc'
The driver name is constructed automatically from the device types:
v4l : /dev/video<capture>
dv1394: /dev/dv1394/<capture>
If you have different driver name, you can specify the driver name explicitely
instead of device type. Examples of valid file parameter:
/dev/v4l/video0:pal
/dev/ieee1394/1:ntsc
dv1394:ntsc
v4l:pal
:secam
capture:
Defines the index number of the capture source, starting from 0. The first capture device is always 0.
The VideoTexutre modules knows that you want to start a live video capture when you set this parameter to a number >= 0. Setting this parameter < 0 indicates a video file playback. Default value is -1.
rate:
the capture frame rate, by default 25 frames/sec
width:
height:
Width and height of the video capture in pixel, default value 0.
In Windows you must specify these values and they must fit with the capture device capability.
For example, if you have a webcam that can capture at 160x120, 320x240 or 640x480,
you must specify one of these couple of values or the opening of the video source will fail.
In Linux, default values are provided by the VideoForLinux driver if you don't specify width and height.
Simple example
**************
1. Texture definition script:
import VideoTexture
contr = GameLogic.getCurrentController()
obj = contr.getOwner()
if not hasattr(GameLogic, 'video'):
matID = VideoTexture.materialID(obj, 'MAVideoMat')
GameLogic.video = VideoTexture.Texture(obj, matID)
GameLogic.vidSrc = VideoTexture.VideoFFmpeg('trailer_400p.ogg')
# Streaming is also possible:
#GameLogic.vidSrc = VideoTexture.VideoFFmpeg('http://10.32.1.10/trailer_400p.ogg')
GameLogic.vidSrc.repeat = -1
# If the video dimensions are not a power of 2, scaling must be done before
# sending the texture to the GPU. This is done by default with gluScaleImage()
# but you can also use a faster, but less precise, scaling by setting scale
# to True. Best approach is to convert the video offline and set the dimensions right.
GameLogic.vidSrc.scale = True
# FFmpeg always delivers the video image upside down, so flipping is enabled automatically
#GameLogic.vidSrc.flip = True
if contr.getSensors()[0].isPositive():
GameLogic.video.source = GameLogic.vidSrc
GameLogic.vidSrc.play()
2. Texture refresh script:
obj = GameLogic.getCurrentController().getOwner()
if hasattr(GameLogic, 'video') != 0:
GameLogic.video.refresh(True)
You can download this demo here:
http://home.scarlet.be/~tsi46445/blender/VideoTextureDemo.blend
http://home.scarlet.be/~tsi46445/blender/trailer_400p.ogg
2008-10-31 22:35:52 +00:00
|
|
|
|
2012-06-16 20:20:07 +00:00
|
|
|
#include "KX_BlenderMaterial.h"
|
|
|
|
#include "BL_Texture.h"
|
VideoTexture module.
The only compilation system that works for sure is the MSVC project files. I've tried my best to
update the other compilation system but I count on the community to check and fix them.
This is Zdeno Miklas video texture plugin ported to trunk.
The original plugin API is maintained (can be found here http://home.scarlet.be/~tsi46445/blender/blendVideoTex.html)
EXCEPT for the following:
The module name is changed to VideoTexture (instead of blendVideoTex).
A new (and only) video source is now available: VideoFFmpeg()
You must pass 1 to 4 arguments when you create it (you can use named arguments):
VideoFFmpeg(file) : play a video file
VideoFFmpeg(file, capture, rate, width, height) : start a live video capture
file:
In the first form, file is a video file name, relative to startup directory.
It can also be a URL, FFmpeg will happily stream a video from a network source.
In the second form, file is empty or is a hint for the format of the video capture.
In Windows, file is ignored and should be empty or not specified.
In Linux, ffmpeg supports two types of device: VideoForLinux and DV1394.
The user specifies the type of device with the file parameter:
[<device_type>][:<standard>]
<device_type> : 'v4l' for VideoForLinux, 'dv1394' for DV1394; default to 'v4l'
<standard> : 'pal', 'secam' or 'ntsc', default to 'ntsc'
The driver name is constructed automatically from the device types:
v4l : /dev/video<capture>
dv1394: /dev/dv1394/<capture>
If you have different driver name, you can specify the driver name explicitely
instead of device type. Examples of valid file parameter:
/dev/v4l/video0:pal
/dev/ieee1394/1:ntsc
dv1394:ntsc
v4l:pal
:secam
capture:
Defines the index number of the capture source, starting from 0. The first capture device is always 0.
The VideoTexutre modules knows that you want to start a live video capture when you set this parameter to a number >= 0. Setting this parameter < 0 indicates a video file playback. Default value is -1.
rate:
the capture frame rate, by default 25 frames/sec
width:
height:
Width and height of the video capture in pixel, default value 0.
In Windows you must specify these values and they must fit with the capture device capability.
For example, if you have a webcam that can capture at 160x120, 320x240 or 640x480,
you must specify one of these couple of values or the opening of the video source will fail.
In Linux, default values are provided by the VideoForLinux driver if you don't specify width and height.
Simple example
**************
1. Texture definition script:
import VideoTexture
contr = GameLogic.getCurrentController()
obj = contr.getOwner()
if not hasattr(GameLogic, 'video'):
matID = VideoTexture.materialID(obj, 'MAVideoMat')
GameLogic.video = VideoTexture.Texture(obj, matID)
GameLogic.vidSrc = VideoTexture.VideoFFmpeg('trailer_400p.ogg')
# Streaming is also possible:
#GameLogic.vidSrc = VideoTexture.VideoFFmpeg('http://10.32.1.10/trailer_400p.ogg')
GameLogic.vidSrc.repeat = -1
# If the video dimensions are not a power of 2, scaling must be done before
# sending the texture to the GPU. This is done by default with gluScaleImage()
# but you can also use a faster, but less precise, scaling by setting scale
# to True. Best approach is to convert the video offline and set the dimensions right.
GameLogic.vidSrc.scale = True
# FFmpeg always delivers the video image upside down, so flipping is enabled automatically
#GameLogic.vidSrc.flip = True
if contr.getSensors()[0].isPositive():
GameLogic.video.source = GameLogic.vidSrc
GameLogic.vidSrc.play()
2. Texture refresh script:
obj = GameLogic.getCurrentController().getOwner()
if hasattr(GameLogic, 'video') != 0:
GameLogic.video.refresh(True)
You can download this demo here:
http://home.scarlet.be/~tsi46445/blender/VideoTextureDemo.blend
http://home.scarlet.be/~tsi46445/blender/trailer_400p.ogg
2008-10-31 22:35:52 +00:00
|
|
|
|
|
|
|
#include "KX_KetsjiEngine.h"
|
|
|
|
#include "KX_PythonInit.h"
|
|
|
|
#include "Texture.h"
|
|
|
|
#include "ImageBase.h"
|
|
|
|
#include "Exception.h"
|
|
|
|
|
|
|
|
#include <memory.h>
|
2009-04-20 15:06:46 +00:00
|
|
|
#include "GL/glew.h"
|
VideoTexture module.
The only compilation system that works for sure is the MSVC project files. I've tried my best to
update the other compilation system but I count on the community to check and fix them.
This is Zdeno Miklas video texture plugin ported to trunk.
The original plugin API is maintained (can be found here http://home.scarlet.be/~tsi46445/blender/blendVideoTex.html)
EXCEPT for the following:
The module name is changed to VideoTexture (instead of blendVideoTex).
A new (and only) video source is now available: VideoFFmpeg()
You must pass 1 to 4 arguments when you create it (you can use named arguments):
VideoFFmpeg(file) : play a video file
VideoFFmpeg(file, capture, rate, width, height) : start a live video capture
file:
In the first form, file is a video file name, relative to startup directory.
It can also be a URL, FFmpeg will happily stream a video from a network source.
In the second form, file is empty or is a hint for the format of the video capture.
In Windows, file is ignored and should be empty or not specified.
In Linux, ffmpeg supports two types of device: VideoForLinux and DV1394.
The user specifies the type of device with the file parameter:
[<device_type>][:<standard>]
<device_type> : 'v4l' for VideoForLinux, 'dv1394' for DV1394; default to 'v4l'
<standard> : 'pal', 'secam' or 'ntsc', default to 'ntsc'
The driver name is constructed automatically from the device types:
v4l : /dev/video<capture>
dv1394: /dev/dv1394/<capture>
If you have different driver name, you can specify the driver name explicitely
instead of device type. Examples of valid file parameter:
/dev/v4l/video0:pal
/dev/ieee1394/1:ntsc
dv1394:ntsc
v4l:pal
:secam
capture:
Defines the index number of the capture source, starting from 0. The first capture device is always 0.
The VideoTexutre modules knows that you want to start a live video capture when you set this parameter to a number >= 0. Setting this parameter < 0 indicates a video file playback. Default value is -1.
rate:
the capture frame rate, by default 25 frames/sec
width:
height:
Width and height of the video capture in pixel, default value 0.
In Windows you must specify these values and they must fit with the capture device capability.
For example, if you have a webcam that can capture at 160x120, 320x240 or 640x480,
you must specify one of these couple of values or the opening of the video source will fail.
In Linux, default values are provided by the VideoForLinux driver if you don't specify width and height.
Simple example
**************
1. Texture definition script:
import VideoTexture
contr = GameLogic.getCurrentController()
obj = contr.getOwner()
if not hasattr(GameLogic, 'video'):
matID = VideoTexture.materialID(obj, 'MAVideoMat')
GameLogic.video = VideoTexture.Texture(obj, matID)
GameLogic.vidSrc = VideoTexture.VideoFFmpeg('trailer_400p.ogg')
# Streaming is also possible:
#GameLogic.vidSrc = VideoTexture.VideoFFmpeg('http://10.32.1.10/trailer_400p.ogg')
GameLogic.vidSrc.repeat = -1
# If the video dimensions are not a power of 2, scaling must be done before
# sending the texture to the GPU. This is done by default with gluScaleImage()
# but you can also use a faster, but less precise, scaling by setting scale
# to True. Best approach is to convert the video offline and set the dimensions right.
GameLogic.vidSrc.scale = True
# FFmpeg always delivers the video image upside down, so flipping is enabled automatically
#GameLogic.vidSrc.flip = True
if contr.getSensors()[0].isPositive():
GameLogic.video.source = GameLogic.vidSrc
GameLogic.vidSrc.play()
2. Texture refresh script:
obj = GameLogic.getCurrentController().getOwner()
if hasattr(GameLogic, 'video') != 0:
GameLogic.video.refresh(True)
You can download this demo here:
http://home.scarlet.be/~tsi46445/blender/VideoTextureDemo.blend
http://home.scarlet.be/~tsi46445/blender/trailer_400p.ogg
2008-10-31 22:35:52 +00:00
|
|
|
|
|
|
|
|
|
|
|
// macro for exception handling and logging
|
|
|
|
#define CATCH_EXCP catch (Exception & exp) \
|
2009-06-08 20:08:19 +00:00
|
|
|
{ exp.report(); return NULL; }
|
VideoTexture module.
The only compilation system that works for sure is the MSVC project files. I've tried my best to
update the other compilation system but I count on the community to check and fix them.
This is Zdeno Miklas video texture plugin ported to trunk.
The original plugin API is maintained (can be found here http://home.scarlet.be/~tsi46445/blender/blendVideoTex.html)
EXCEPT for the following:
The module name is changed to VideoTexture (instead of blendVideoTex).
A new (and only) video source is now available: VideoFFmpeg()
You must pass 1 to 4 arguments when you create it (you can use named arguments):
VideoFFmpeg(file) : play a video file
VideoFFmpeg(file, capture, rate, width, height) : start a live video capture
file:
In the first form, file is a video file name, relative to startup directory.
It can also be a URL, FFmpeg will happily stream a video from a network source.
In the second form, file is empty or is a hint for the format of the video capture.
In Windows, file is ignored and should be empty or not specified.
In Linux, ffmpeg supports two types of device: VideoForLinux and DV1394.
The user specifies the type of device with the file parameter:
[<device_type>][:<standard>]
<device_type> : 'v4l' for VideoForLinux, 'dv1394' for DV1394; default to 'v4l'
<standard> : 'pal', 'secam' or 'ntsc', default to 'ntsc'
The driver name is constructed automatically from the device types:
v4l : /dev/video<capture>
dv1394: /dev/dv1394/<capture>
If you have different driver name, you can specify the driver name explicitely
instead of device type. Examples of valid file parameter:
/dev/v4l/video0:pal
/dev/ieee1394/1:ntsc
dv1394:ntsc
v4l:pal
:secam
capture:
Defines the index number of the capture source, starting from 0. The first capture device is always 0.
The VideoTexutre modules knows that you want to start a live video capture when you set this parameter to a number >= 0. Setting this parameter < 0 indicates a video file playback. Default value is -1.
rate:
the capture frame rate, by default 25 frames/sec
width:
height:
Width and height of the video capture in pixel, default value 0.
In Windows you must specify these values and they must fit with the capture device capability.
For example, if you have a webcam that can capture at 160x120, 320x240 or 640x480,
you must specify one of these couple of values or the opening of the video source will fail.
In Linux, default values are provided by the VideoForLinux driver if you don't specify width and height.
Simple example
**************
1. Texture definition script:
import VideoTexture
contr = GameLogic.getCurrentController()
obj = contr.getOwner()
if not hasattr(GameLogic, 'video'):
matID = VideoTexture.materialID(obj, 'MAVideoMat')
GameLogic.video = VideoTexture.Texture(obj, matID)
GameLogic.vidSrc = VideoTexture.VideoFFmpeg('trailer_400p.ogg')
# Streaming is also possible:
#GameLogic.vidSrc = VideoTexture.VideoFFmpeg('http://10.32.1.10/trailer_400p.ogg')
GameLogic.vidSrc.repeat = -1
# If the video dimensions are not a power of 2, scaling must be done before
# sending the texture to the GPU. This is done by default with gluScaleImage()
# but you can also use a faster, but less precise, scaling by setting scale
# to True. Best approach is to convert the video offline and set the dimensions right.
GameLogic.vidSrc.scale = True
# FFmpeg always delivers the video image upside down, so flipping is enabled automatically
#GameLogic.vidSrc.flip = True
if contr.getSensors()[0].isPositive():
GameLogic.video.source = GameLogic.vidSrc
GameLogic.vidSrc.play()
2. Texture refresh script:
obj = GameLogic.getCurrentController().getOwner()
if hasattr(GameLogic, 'video') != 0:
GameLogic.video.refresh(True)
You can download this demo here:
http://home.scarlet.be/~tsi46445/blender/VideoTextureDemo.blend
http://home.scarlet.be/~tsi46445/blender/trailer_400p.ogg
2008-10-31 22:35:52 +00:00
|
|
|
|
|
|
|
|
|
|
|
// Blender GameObject type
|
|
|
|
BlendType<KX_GameObject> gameObjectType ("KX_GameObject");
|
2012-05-01 02:50:17 +00:00
|
|
|
BlendType<KX_LightObject> lightObjectType ("KX_LightObject");
|
VideoTexture module.
The only compilation system that works for sure is the MSVC project files. I've tried my best to
update the other compilation system but I count on the community to check and fix them.
This is Zdeno Miklas video texture plugin ported to trunk.
The original plugin API is maintained (can be found here http://home.scarlet.be/~tsi46445/blender/blendVideoTex.html)
EXCEPT for the following:
The module name is changed to VideoTexture (instead of blendVideoTex).
A new (and only) video source is now available: VideoFFmpeg()
You must pass 1 to 4 arguments when you create it (you can use named arguments):
VideoFFmpeg(file) : play a video file
VideoFFmpeg(file, capture, rate, width, height) : start a live video capture
file:
In the first form, file is a video file name, relative to startup directory.
It can also be a URL, FFmpeg will happily stream a video from a network source.
In the second form, file is empty or is a hint for the format of the video capture.
In Windows, file is ignored and should be empty or not specified.
In Linux, ffmpeg supports two types of device: VideoForLinux and DV1394.
The user specifies the type of device with the file parameter:
[<device_type>][:<standard>]
<device_type> : 'v4l' for VideoForLinux, 'dv1394' for DV1394; default to 'v4l'
<standard> : 'pal', 'secam' or 'ntsc', default to 'ntsc'
The driver name is constructed automatically from the device types:
v4l : /dev/video<capture>
dv1394: /dev/dv1394/<capture>
If you have different driver name, you can specify the driver name explicitely
instead of device type. Examples of valid file parameter:
/dev/v4l/video0:pal
/dev/ieee1394/1:ntsc
dv1394:ntsc
v4l:pal
:secam
capture:
Defines the index number of the capture source, starting from 0. The first capture device is always 0.
The VideoTexutre modules knows that you want to start a live video capture when you set this parameter to a number >= 0. Setting this parameter < 0 indicates a video file playback. Default value is -1.
rate:
the capture frame rate, by default 25 frames/sec
width:
height:
Width and height of the video capture in pixel, default value 0.
In Windows you must specify these values and they must fit with the capture device capability.
For example, if you have a webcam that can capture at 160x120, 320x240 or 640x480,
you must specify one of these couple of values or the opening of the video source will fail.
In Linux, default values are provided by the VideoForLinux driver if you don't specify width and height.
Simple example
**************
1. Texture definition script:
import VideoTexture
contr = GameLogic.getCurrentController()
obj = contr.getOwner()
if not hasattr(GameLogic, 'video'):
matID = VideoTexture.materialID(obj, 'MAVideoMat')
GameLogic.video = VideoTexture.Texture(obj, matID)
GameLogic.vidSrc = VideoTexture.VideoFFmpeg('trailer_400p.ogg')
# Streaming is also possible:
#GameLogic.vidSrc = VideoTexture.VideoFFmpeg('http://10.32.1.10/trailer_400p.ogg')
GameLogic.vidSrc.repeat = -1
# If the video dimensions are not a power of 2, scaling must be done before
# sending the texture to the GPU. This is done by default with gluScaleImage()
# but you can also use a faster, but less precise, scaling by setting scale
# to True. Best approach is to convert the video offline and set the dimensions right.
GameLogic.vidSrc.scale = True
# FFmpeg always delivers the video image upside down, so flipping is enabled automatically
#GameLogic.vidSrc.flip = True
if contr.getSensors()[0].isPositive():
GameLogic.video.source = GameLogic.vidSrc
GameLogic.vidSrc.play()
2. Texture refresh script:
obj = GameLogic.getCurrentController().getOwner()
if hasattr(GameLogic, 'video') != 0:
GameLogic.video.refresh(True)
You can download this demo here:
http://home.scarlet.be/~tsi46445/blender/VideoTextureDemo.blend
http://home.scarlet.be/~tsi46445/blender/trailer_400p.ogg
2008-10-31 22:35:52 +00:00
|
|
|
|
|
|
|
|
|
|
|
// load texture
|
|
|
|
void loadTexture (unsigned int texId, unsigned int * texture, short * size,
|
|
|
|
bool mipmap)
|
|
|
|
{
|
|
|
|
// load texture for rendering
|
|
|
|
glBindTexture(GL_TEXTURE_2D, texId);
|
|
|
|
if (mipmap)
|
|
|
|
{
|
|
|
|
glTexParameteri(GL_TEXTURE_2D, GL_TEXTURE_MIN_FILTER, GL_LINEAR_MIPMAP_LINEAR);
|
|
|
|
glTexParameteri(GL_TEXTURE_2D, GL_TEXTURE_MAG_FILTER, GL_LINEAR);
|
|
|
|
gluBuild2DMipmaps(GL_TEXTURE_2D, GL_RGBA, size[0], size[1], GL_RGBA, GL_UNSIGNED_BYTE, texture);
|
|
|
|
}
|
|
|
|
else
|
|
|
|
{
|
|
|
|
glTexParameteri(GL_TEXTURE_2D, GL_TEXTURE_MIN_FILTER, GL_LINEAR);
|
|
|
|
glTexParameteri(GL_TEXTURE_2D, GL_TEXTURE_MAG_FILTER, GL_LINEAR);
|
|
|
|
glTexImage2D( GL_TEXTURE_2D, 0, GL_RGBA, size[0], size[1], 0, GL_RGBA, GL_UNSIGNED_BYTE, texture);
|
|
|
|
}
|
|
|
|
glTexEnvi(GL_TEXTURE_ENV, GL_TEXTURE_ENV_MODE, GL_MODULATE);
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
|
|
// get pointer to material
|
|
|
|
RAS_IPolyMaterial * getMaterial (PyObject *obj, short matID)
|
|
|
|
{
|
|
|
|
// if object is available
|
|
|
|
if (obj != NULL)
|
|
|
|
{
|
|
|
|
// get pointer to texture image
|
|
|
|
KX_GameObject * gameObj = gameObjectType.checkType(obj);
|
|
|
|
if (gameObj != NULL && gameObj->GetMeshCount() > 0)
|
|
|
|
{
|
|
|
|
// get material from mesh
|
|
|
|
RAS_MeshObject * mesh = gameObj->GetMesh(0);
|
|
|
|
RAS_MeshMaterial *meshMat = mesh->GetMeshMaterial(matID);
|
2008-11-01 20:18:15 +00:00
|
|
|
if (meshMat != NULL && meshMat->m_bucket != NULL)
|
VideoTexture module.
The only compilation system that works for sure is the MSVC project files. I've tried my best to
update the other compilation system but I count on the community to check and fix them.
This is Zdeno Miklas video texture plugin ported to trunk.
The original plugin API is maintained (can be found here http://home.scarlet.be/~tsi46445/blender/blendVideoTex.html)
EXCEPT for the following:
The module name is changed to VideoTexture (instead of blendVideoTex).
A new (and only) video source is now available: VideoFFmpeg()
You must pass 1 to 4 arguments when you create it (you can use named arguments):
VideoFFmpeg(file) : play a video file
VideoFFmpeg(file, capture, rate, width, height) : start a live video capture
file:
In the first form, file is a video file name, relative to startup directory.
It can also be a URL, FFmpeg will happily stream a video from a network source.
In the second form, file is empty or is a hint for the format of the video capture.
In Windows, file is ignored and should be empty or not specified.
In Linux, ffmpeg supports two types of device: VideoForLinux and DV1394.
The user specifies the type of device with the file parameter:
[<device_type>][:<standard>]
<device_type> : 'v4l' for VideoForLinux, 'dv1394' for DV1394; default to 'v4l'
<standard> : 'pal', 'secam' or 'ntsc', default to 'ntsc'
The driver name is constructed automatically from the device types:
v4l : /dev/video<capture>
dv1394: /dev/dv1394/<capture>
If you have different driver name, you can specify the driver name explicitely
instead of device type. Examples of valid file parameter:
/dev/v4l/video0:pal
/dev/ieee1394/1:ntsc
dv1394:ntsc
v4l:pal
:secam
capture:
Defines the index number of the capture source, starting from 0. The first capture device is always 0.
The VideoTexutre modules knows that you want to start a live video capture when you set this parameter to a number >= 0. Setting this parameter < 0 indicates a video file playback. Default value is -1.
rate:
the capture frame rate, by default 25 frames/sec
width:
height:
Width and height of the video capture in pixel, default value 0.
In Windows you must specify these values and they must fit with the capture device capability.
For example, if you have a webcam that can capture at 160x120, 320x240 or 640x480,
you must specify one of these couple of values or the opening of the video source will fail.
In Linux, default values are provided by the VideoForLinux driver if you don't specify width and height.
Simple example
**************
1. Texture definition script:
import VideoTexture
contr = GameLogic.getCurrentController()
obj = contr.getOwner()
if not hasattr(GameLogic, 'video'):
matID = VideoTexture.materialID(obj, 'MAVideoMat')
GameLogic.video = VideoTexture.Texture(obj, matID)
GameLogic.vidSrc = VideoTexture.VideoFFmpeg('trailer_400p.ogg')
# Streaming is also possible:
#GameLogic.vidSrc = VideoTexture.VideoFFmpeg('http://10.32.1.10/trailer_400p.ogg')
GameLogic.vidSrc.repeat = -1
# If the video dimensions are not a power of 2, scaling must be done before
# sending the texture to the GPU. This is done by default with gluScaleImage()
# but you can also use a faster, but less precise, scaling by setting scale
# to True. Best approach is to convert the video offline and set the dimensions right.
GameLogic.vidSrc.scale = True
# FFmpeg always delivers the video image upside down, so flipping is enabled automatically
#GameLogic.vidSrc.flip = True
if contr.getSensors()[0].isPositive():
GameLogic.video.source = GameLogic.vidSrc
GameLogic.vidSrc.play()
2. Texture refresh script:
obj = GameLogic.getCurrentController().getOwner()
if hasattr(GameLogic, 'video') != 0:
GameLogic.video.refresh(True)
You can download this demo here:
http://home.scarlet.be/~tsi46445/blender/VideoTextureDemo.blend
http://home.scarlet.be/~tsi46445/blender/trailer_400p.ogg
2008-10-31 22:35:52 +00:00
|
|
|
// return pointer to polygon or blender material
|
|
|
|
return meshMat->m_bucket->GetPolyMaterial();
|
|
|
|
}
|
|
|
|
}
|
|
|
|
// otherwise material was not found
|
|
|
|
return NULL;
|
|
|
|
}
|
|
|
|
|
2012-05-01 02:50:17 +00:00
|
|
|
// get pointer to a lamp
|
|
|
|
KX_LightObject * getLamp(PyObject *obj)
|
|
|
|
{
|
|
|
|
// if object is available
|
|
|
|
if (obj == NULL) return NULL;
|
|
|
|
|
|
|
|
// returns NULL if obj is not a KX_LightObject
|
|
|
|
return lightObjectType.checkType(obj);
|
|
|
|
}
|
|
|
|
|
VideoTexture module.
The only compilation system that works for sure is the MSVC project files. I've tried my best to
update the other compilation system but I count on the community to check and fix them.
This is Zdeno Miklas video texture plugin ported to trunk.
The original plugin API is maintained (can be found here http://home.scarlet.be/~tsi46445/blender/blendVideoTex.html)
EXCEPT for the following:
The module name is changed to VideoTexture (instead of blendVideoTex).
A new (and only) video source is now available: VideoFFmpeg()
You must pass 1 to 4 arguments when you create it (you can use named arguments):
VideoFFmpeg(file) : play a video file
VideoFFmpeg(file, capture, rate, width, height) : start a live video capture
file:
In the first form, file is a video file name, relative to startup directory.
It can also be a URL, FFmpeg will happily stream a video from a network source.
In the second form, file is empty or is a hint for the format of the video capture.
In Windows, file is ignored and should be empty or not specified.
In Linux, ffmpeg supports two types of device: VideoForLinux and DV1394.
The user specifies the type of device with the file parameter:
[<device_type>][:<standard>]
<device_type> : 'v4l' for VideoForLinux, 'dv1394' for DV1394; default to 'v4l'
<standard> : 'pal', 'secam' or 'ntsc', default to 'ntsc'
The driver name is constructed automatically from the device types:
v4l : /dev/video<capture>
dv1394: /dev/dv1394/<capture>
If you have different driver name, you can specify the driver name explicitely
instead of device type. Examples of valid file parameter:
/dev/v4l/video0:pal
/dev/ieee1394/1:ntsc
dv1394:ntsc
v4l:pal
:secam
capture:
Defines the index number of the capture source, starting from 0. The first capture device is always 0.
The VideoTexutre modules knows that you want to start a live video capture when you set this parameter to a number >= 0. Setting this parameter < 0 indicates a video file playback. Default value is -1.
rate:
the capture frame rate, by default 25 frames/sec
width:
height:
Width and height of the video capture in pixel, default value 0.
In Windows you must specify these values and they must fit with the capture device capability.
For example, if you have a webcam that can capture at 160x120, 320x240 or 640x480,
you must specify one of these couple of values or the opening of the video source will fail.
In Linux, default values are provided by the VideoForLinux driver if you don't specify width and height.
Simple example
**************
1. Texture definition script:
import VideoTexture
contr = GameLogic.getCurrentController()
obj = contr.getOwner()
if not hasattr(GameLogic, 'video'):
matID = VideoTexture.materialID(obj, 'MAVideoMat')
GameLogic.video = VideoTexture.Texture(obj, matID)
GameLogic.vidSrc = VideoTexture.VideoFFmpeg('trailer_400p.ogg')
# Streaming is also possible:
#GameLogic.vidSrc = VideoTexture.VideoFFmpeg('http://10.32.1.10/trailer_400p.ogg')
GameLogic.vidSrc.repeat = -1
# If the video dimensions are not a power of 2, scaling must be done before
# sending the texture to the GPU. This is done by default with gluScaleImage()
# but you can also use a faster, but less precise, scaling by setting scale
# to True. Best approach is to convert the video offline and set the dimensions right.
GameLogic.vidSrc.scale = True
# FFmpeg always delivers the video image upside down, so flipping is enabled automatically
#GameLogic.vidSrc.flip = True
if contr.getSensors()[0].isPositive():
GameLogic.video.source = GameLogic.vidSrc
GameLogic.vidSrc.play()
2. Texture refresh script:
obj = GameLogic.getCurrentController().getOwner()
if hasattr(GameLogic, 'video') != 0:
GameLogic.video.refresh(True)
You can download this demo here:
http://home.scarlet.be/~tsi46445/blender/VideoTextureDemo.blend
http://home.scarlet.be/~tsi46445/blender/trailer_400p.ogg
2008-10-31 22:35:52 +00:00
|
|
|
|
|
|
|
// get material ID
|
2011-10-27 14:41:26 +00:00
|
|
|
short getMaterialID(PyObject * obj, const char *name)
|
VideoTexture module.
The only compilation system that works for sure is the MSVC project files. I've tried my best to
update the other compilation system but I count on the community to check and fix them.
This is Zdeno Miklas video texture plugin ported to trunk.
The original plugin API is maintained (can be found here http://home.scarlet.be/~tsi46445/blender/blendVideoTex.html)
EXCEPT for the following:
The module name is changed to VideoTexture (instead of blendVideoTex).
A new (and only) video source is now available: VideoFFmpeg()
You must pass 1 to 4 arguments when you create it (you can use named arguments):
VideoFFmpeg(file) : play a video file
VideoFFmpeg(file, capture, rate, width, height) : start a live video capture
file:
In the first form, file is a video file name, relative to startup directory.
It can also be a URL, FFmpeg will happily stream a video from a network source.
In the second form, file is empty or is a hint for the format of the video capture.
In Windows, file is ignored and should be empty or not specified.
In Linux, ffmpeg supports two types of device: VideoForLinux and DV1394.
The user specifies the type of device with the file parameter:
[<device_type>][:<standard>]
<device_type> : 'v4l' for VideoForLinux, 'dv1394' for DV1394; default to 'v4l'
<standard> : 'pal', 'secam' or 'ntsc', default to 'ntsc'
The driver name is constructed automatically from the device types:
v4l : /dev/video<capture>
dv1394: /dev/dv1394/<capture>
If you have different driver name, you can specify the driver name explicitely
instead of device type. Examples of valid file parameter:
/dev/v4l/video0:pal
/dev/ieee1394/1:ntsc
dv1394:ntsc
v4l:pal
:secam
capture:
Defines the index number of the capture source, starting from 0. The first capture device is always 0.
The VideoTexutre modules knows that you want to start a live video capture when you set this parameter to a number >= 0. Setting this parameter < 0 indicates a video file playback. Default value is -1.
rate:
the capture frame rate, by default 25 frames/sec
width:
height:
Width and height of the video capture in pixel, default value 0.
In Windows you must specify these values and they must fit with the capture device capability.
For example, if you have a webcam that can capture at 160x120, 320x240 or 640x480,
you must specify one of these couple of values or the opening of the video source will fail.
In Linux, default values are provided by the VideoForLinux driver if you don't specify width and height.
Simple example
**************
1. Texture definition script:
import VideoTexture
contr = GameLogic.getCurrentController()
obj = contr.getOwner()
if not hasattr(GameLogic, 'video'):
matID = VideoTexture.materialID(obj, 'MAVideoMat')
GameLogic.video = VideoTexture.Texture(obj, matID)
GameLogic.vidSrc = VideoTexture.VideoFFmpeg('trailer_400p.ogg')
# Streaming is also possible:
#GameLogic.vidSrc = VideoTexture.VideoFFmpeg('http://10.32.1.10/trailer_400p.ogg')
GameLogic.vidSrc.repeat = -1
# If the video dimensions are not a power of 2, scaling must be done before
# sending the texture to the GPU. This is done by default with gluScaleImage()
# but you can also use a faster, but less precise, scaling by setting scale
# to True. Best approach is to convert the video offline and set the dimensions right.
GameLogic.vidSrc.scale = True
# FFmpeg always delivers the video image upside down, so flipping is enabled automatically
#GameLogic.vidSrc.flip = True
if contr.getSensors()[0].isPositive():
GameLogic.video.source = GameLogic.vidSrc
GameLogic.vidSrc.play()
2. Texture refresh script:
obj = GameLogic.getCurrentController().getOwner()
if hasattr(GameLogic, 'video') != 0:
GameLogic.video.refresh(True)
You can download this demo here:
http://home.scarlet.be/~tsi46445/blender/VideoTextureDemo.blend
http://home.scarlet.be/~tsi46445/blender/trailer_400p.ogg
2008-10-31 22:35:52 +00:00
|
|
|
{
|
|
|
|
// search for material
|
|
|
|
for (short matID = 0;; ++matID)
|
|
|
|
{
|
|
|
|
// get material
|
|
|
|
RAS_IPolyMaterial * mat = getMaterial(obj, matID);
|
|
|
|
// if material is not available, report that no material was found
|
2008-11-07 10:54:32 +00:00
|
|
|
if (mat == NULL)
|
|
|
|
break;
|
|
|
|
// name is a material name if it starts with MA and a UV texture name if it starts with IM
|
|
|
|
if (name[0] == 'I' && name[1] == 'M')
|
|
|
|
{
|
|
|
|
// if texture name matches
|
|
|
|
if (strcmp(mat->GetTextureName().ReadPtr(), name) == 0)
|
|
|
|
return matID;
|
|
|
|
} else
|
|
|
|
{
|
|
|
|
// if material name matches
|
|
|
|
if (strcmp(mat->GetMaterialName().ReadPtr(), name) == 0)
|
|
|
|
return matID;
|
|
|
|
}
|
VideoTexture module.
The only compilation system that works for sure is the MSVC project files. I've tried my best to
update the other compilation system but I count on the community to check and fix them.
This is Zdeno Miklas video texture plugin ported to trunk.
The original plugin API is maintained (can be found here http://home.scarlet.be/~tsi46445/blender/blendVideoTex.html)
EXCEPT for the following:
The module name is changed to VideoTexture (instead of blendVideoTex).
A new (and only) video source is now available: VideoFFmpeg()
You must pass 1 to 4 arguments when you create it (you can use named arguments):
VideoFFmpeg(file) : play a video file
VideoFFmpeg(file, capture, rate, width, height) : start a live video capture
file:
In the first form, file is a video file name, relative to startup directory.
It can also be a URL, FFmpeg will happily stream a video from a network source.
In the second form, file is empty or is a hint for the format of the video capture.
In Windows, file is ignored and should be empty or not specified.
In Linux, ffmpeg supports two types of device: VideoForLinux and DV1394.
The user specifies the type of device with the file parameter:
[<device_type>][:<standard>]
<device_type> : 'v4l' for VideoForLinux, 'dv1394' for DV1394; default to 'v4l'
<standard> : 'pal', 'secam' or 'ntsc', default to 'ntsc'
The driver name is constructed automatically from the device types:
v4l : /dev/video<capture>
dv1394: /dev/dv1394/<capture>
If you have different driver name, you can specify the driver name explicitely
instead of device type. Examples of valid file parameter:
/dev/v4l/video0:pal
/dev/ieee1394/1:ntsc
dv1394:ntsc
v4l:pal
:secam
capture:
Defines the index number of the capture source, starting from 0. The first capture device is always 0.
The VideoTexutre modules knows that you want to start a live video capture when you set this parameter to a number >= 0. Setting this parameter < 0 indicates a video file playback. Default value is -1.
rate:
the capture frame rate, by default 25 frames/sec
width:
height:
Width and height of the video capture in pixel, default value 0.
In Windows you must specify these values and they must fit with the capture device capability.
For example, if you have a webcam that can capture at 160x120, 320x240 or 640x480,
you must specify one of these couple of values or the opening of the video source will fail.
In Linux, default values are provided by the VideoForLinux driver if you don't specify width and height.
Simple example
**************
1. Texture definition script:
import VideoTexture
contr = GameLogic.getCurrentController()
obj = contr.getOwner()
if not hasattr(GameLogic, 'video'):
matID = VideoTexture.materialID(obj, 'MAVideoMat')
GameLogic.video = VideoTexture.Texture(obj, matID)
GameLogic.vidSrc = VideoTexture.VideoFFmpeg('trailer_400p.ogg')
# Streaming is also possible:
#GameLogic.vidSrc = VideoTexture.VideoFFmpeg('http://10.32.1.10/trailer_400p.ogg')
GameLogic.vidSrc.repeat = -1
# If the video dimensions are not a power of 2, scaling must be done before
# sending the texture to the GPU. This is done by default with gluScaleImage()
# but you can also use a faster, but less precise, scaling by setting scale
# to True. Best approach is to convert the video offline and set the dimensions right.
GameLogic.vidSrc.scale = True
# FFmpeg always delivers the video image upside down, so flipping is enabled automatically
#GameLogic.vidSrc.flip = True
if contr.getSensors()[0].isPositive():
GameLogic.video.source = GameLogic.vidSrc
GameLogic.vidSrc.play()
2. Texture refresh script:
obj = GameLogic.getCurrentController().getOwner()
if hasattr(GameLogic, 'video') != 0:
GameLogic.video.refresh(True)
You can download this demo here:
http://home.scarlet.be/~tsi46445/blender/VideoTextureDemo.blend
http://home.scarlet.be/~tsi46445/blender/trailer_400p.ogg
2008-10-31 22:35:52 +00:00
|
|
|
}
|
|
|
|
// material was not found
|
|
|
|
return -1;
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
|
|
// Texture object allocation
|
|
|
|
PyObject * Texture_new (PyTypeObject *type, PyObject *args, PyObject *kwds)
|
|
|
|
{
|
|
|
|
// allocate object
|
|
|
|
Texture * self = reinterpret_cast<Texture*>(type->tp_alloc(type, 0));
|
|
|
|
// initialize object structure
|
|
|
|
self->m_actTex = 0;
|
|
|
|
self->m_orgSaved = false;
|
|
|
|
self->m_imgTexture = NULL;
|
|
|
|
self->m_matTexture = NULL;
|
|
|
|
self->m_mipmap = false;
|
|
|
|
self->m_scaledImg = NULL;
|
|
|
|
self->m_scaledImgSize = 0;
|
|
|
|
self->m_source = NULL;
|
|
|
|
self->m_lastClock = 0.0;
|
|
|
|
// return allocated object
|
|
|
|
return reinterpret_cast<PyObject*>(self);
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
|
|
// forward declaration
|
|
|
|
PyObject * Texture_close(Texture * self);
|
|
|
|
int Texture_setSource (Texture * self, PyObject * value, void * closure);
|
|
|
|
|
|
|
|
|
|
|
|
// Texture object deallocation
|
|
|
|
void Texture_dealloc (Texture * self)
|
|
|
|
{
|
|
|
|
// release renderer
|
|
|
|
Py_XDECREF(self->m_source);
|
|
|
|
// close texture
|
2009-06-08 20:08:19 +00:00
|
|
|
PyObject* ret = Texture_close(self);
|
|
|
|
Py_DECREF(ret);
|
VideoTexture module.
The only compilation system that works for sure is the MSVC project files. I've tried my best to
update the other compilation system but I count on the community to check and fix them.
This is Zdeno Miklas video texture plugin ported to trunk.
The original plugin API is maintained (can be found here http://home.scarlet.be/~tsi46445/blender/blendVideoTex.html)
EXCEPT for the following:
The module name is changed to VideoTexture (instead of blendVideoTex).
A new (and only) video source is now available: VideoFFmpeg()
You must pass 1 to 4 arguments when you create it (you can use named arguments):
VideoFFmpeg(file) : play a video file
VideoFFmpeg(file, capture, rate, width, height) : start a live video capture
file:
In the first form, file is a video file name, relative to startup directory.
It can also be a URL, FFmpeg will happily stream a video from a network source.
In the second form, file is empty or is a hint for the format of the video capture.
In Windows, file is ignored and should be empty or not specified.
In Linux, ffmpeg supports two types of device: VideoForLinux and DV1394.
The user specifies the type of device with the file parameter:
[<device_type>][:<standard>]
<device_type> : 'v4l' for VideoForLinux, 'dv1394' for DV1394; default to 'v4l'
<standard> : 'pal', 'secam' or 'ntsc', default to 'ntsc'
The driver name is constructed automatically from the device types:
v4l : /dev/video<capture>
dv1394: /dev/dv1394/<capture>
If you have different driver name, you can specify the driver name explicitely
instead of device type. Examples of valid file parameter:
/dev/v4l/video0:pal
/dev/ieee1394/1:ntsc
dv1394:ntsc
v4l:pal
:secam
capture:
Defines the index number of the capture source, starting from 0. The first capture device is always 0.
The VideoTexutre modules knows that you want to start a live video capture when you set this parameter to a number >= 0. Setting this parameter < 0 indicates a video file playback. Default value is -1.
rate:
the capture frame rate, by default 25 frames/sec
width:
height:
Width and height of the video capture in pixel, default value 0.
In Windows you must specify these values and they must fit with the capture device capability.
For example, if you have a webcam that can capture at 160x120, 320x240 or 640x480,
you must specify one of these couple of values or the opening of the video source will fail.
In Linux, default values are provided by the VideoForLinux driver if you don't specify width and height.
Simple example
**************
1. Texture definition script:
import VideoTexture
contr = GameLogic.getCurrentController()
obj = contr.getOwner()
if not hasattr(GameLogic, 'video'):
matID = VideoTexture.materialID(obj, 'MAVideoMat')
GameLogic.video = VideoTexture.Texture(obj, matID)
GameLogic.vidSrc = VideoTexture.VideoFFmpeg('trailer_400p.ogg')
# Streaming is also possible:
#GameLogic.vidSrc = VideoTexture.VideoFFmpeg('http://10.32.1.10/trailer_400p.ogg')
GameLogic.vidSrc.repeat = -1
# If the video dimensions are not a power of 2, scaling must be done before
# sending the texture to the GPU. This is done by default with gluScaleImage()
# but you can also use a faster, but less precise, scaling by setting scale
# to True. Best approach is to convert the video offline and set the dimensions right.
GameLogic.vidSrc.scale = True
# FFmpeg always delivers the video image upside down, so flipping is enabled automatically
#GameLogic.vidSrc.flip = True
if contr.getSensors()[0].isPositive():
GameLogic.video.source = GameLogic.vidSrc
GameLogic.vidSrc.play()
2. Texture refresh script:
obj = GameLogic.getCurrentController().getOwner()
if hasattr(GameLogic, 'video') != 0:
GameLogic.video.refresh(True)
You can download this demo here:
http://home.scarlet.be/~tsi46445/blender/VideoTextureDemo.blend
http://home.scarlet.be/~tsi46445/blender/trailer_400p.ogg
2008-10-31 22:35:52 +00:00
|
|
|
// release scaled image buffer
|
|
|
|
delete [] self->m_scaledImg;
|
|
|
|
// release object
|
2011-11-03 13:10:37 +00:00
|
|
|
Py_TYPE((PyObject *)self)->tp_free((PyObject*)self);
|
VideoTexture module.
The only compilation system that works for sure is the MSVC project files. I've tried my best to
update the other compilation system but I count on the community to check and fix them.
This is Zdeno Miklas video texture plugin ported to trunk.
The original plugin API is maintained (can be found here http://home.scarlet.be/~tsi46445/blender/blendVideoTex.html)
EXCEPT for the following:
The module name is changed to VideoTexture (instead of blendVideoTex).
A new (and only) video source is now available: VideoFFmpeg()
You must pass 1 to 4 arguments when you create it (you can use named arguments):
VideoFFmpeg(file) : play a video file
VideoFFmpeg(file, capture, rate, width, height) : start a live video capture
file:
In the first form, file is a video file name, relative to startup directory.
It can also be a URL, FFmpeg will happily stream a video from a network source.
In the second form, file is empty or is a hint for the format of the video capture.
In Windows, file is ignored and should be empty or not specified.
In Linux, ffmpeg supports two types of device: VideoForLinux and DV1394.
The user specifies the type of device with the file parameter:
[<device_type>][:<standard>]
<device_type> : 'v4l' for VideoForLinux, 'dv1394' for DV1394; default to 'v4l'
<standard> : 'pal', 'secam' or 'ntsc', default to 'ntsc'
The driver name is constructed automatically from the device types:
v4l : /dev/video<capture>
dv1394: /dev/dv1394/<capture>
If you have different driver name, you can specify the driver name explicitely
instead of device type. Examples of valid file parameter:
/dev/v4l/video0:pal
/dev/ieee1394/1:ntsc
dv1394:ntsc
v4l:pal
:secam
capture:
Defines the index number of the capture source, starting from 0. The first capture device is always 0.
The VideoTexutre modules knows that you want to start a live video capture when you set this parameter to a number >= 0. Setting this parameter < 0 indicates a video file playback. Default value is -1.
rate:
the capture frame rate, by default 25 frames/sec
width:
height:
Width and height of the video capture in pixel, default value 0.
In Windows you must specify these values and they must fit with the capture device capability.
For example, if you have a webcam that can capture at 160x120, 320x240 or 640x480,
you must specify one of these couple of values or the opening of the video source will fail.
In Linux, default values are provided by the VideoForLinux driver if you don't specify width and height.
Simple example
**************
1. Texture definition script:
import VideoTexture
contr = GameLogic.getCurrentController()
obj = contr.getOwner()
if not hasattr(GameLogic, 'video'):
matID = VideoTexture.materialID(obj, 'MAVideoMat')
GameLogic.video = VideoTexture.Texture(obj, matID)
GameLogic.vidSrc = VideoTexture.VideoFFmpeg('trailer_400p.ogg')
# Streaming is also possible:
#GameLogic.vidSrc = VideoTexture.VideoFFmpeg('http://10.32.1.10/trailer_400p.ogg')
GameLogic.vidSrc.repeat = -1
# If the video dimensions are not a power of 2, scaling must be done before
# sending the texture to the GPU. This is done by default with gluScaleImage()
# but you can also use a faster, but less precise, scaling by setting scale
# to True. Best approach is to convert the video offline and set the dimensions right.
GameLogic.vidSrc.scale = True
# FFmpeg always delivers the video image upside down, so flipping is enabled automatically
#GameLogic.vidSrc.flip = True
if contr.getSensors()[0].isPositive():
GameLogic.video.source = GameLogic.vidSrc
GameLogic.vidSrc.play()
2. Texture refresh script:
obj = GameLogic.getCurrentController().getOwner()
if hasattr(GameLogic, 'video') != 0:
GameLogic.video.refresh(True)
You can download this demo here:
http://home.scarlet.be/~tsi46445/blender/VideoTextureDemo.blend
http://home.scarlet.be/~tsi46445/blender/trailer_400p.ogg
2008-10-31 22:35:52 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
|
2008-11-01 12:48:46 +00:00
|
|
|
ExceptionID MaterialNotAvail;
|
|
|
|
ExpDesc MaterialNotAvailDesc (MaterialNotAvail, "Texture material is not available");
|
VideoTexture module.
The only compilation system that works for sure is the MSVC project files. I've tried my best to
update the other compilation system but I count on the community to check and fix them.
This is Zdeno Miklas video texture plugin ported to trunk.
The original plugin API is maintained (can be found here http://home.scarlet.be/~tsi46445/blender/blendVideoTex.html)
EXCEPT for the following:
The module name is changed to VideoTexture (instead of blendVideoTex).
A new (and only) video source is now available: VideoFFmpeg()
You must pass 1 to 4 arguments when you create it (you can use named arguments):
VideoFFmpeg(file) : play a video file
VideoFFmpeg(file, capture, rate, width, height) : start a live video capture
file:
In the first form, file is a video file name, relative to startup directory.
It can also be a URL, FFmpeg will happily stream a video from a network source.
In the second form, file is empty or is a hint for the format of the video capture.
In Windows, file is ignored and should be empty or not specified.
In Linux, ffmpeg supports two types of device: VideoForLinux and DV1394.
The user specifies the type of device with the file parameter:
[<device_type>][:<standard>]
<device_type> : 'v4l' for VideoForLinux, 'dv1394' for DV1394; default to 'v4l'
<standard> : 'pal', 'secam' or 'ntsc', default to 'ntsc'
The driver name is constructed automatically from the device types:
v4l : /dev/video<capture>
dv1394: /dev/dv1394/<capture>
If you have different driver name, you can specify the driver name explicitely
instead of device type. Examples of valid file parameter:
/dev/v4l/video0:pal
/dev/ieee1394/1:ntsc
dv1394:ntsc
v4l:pal
:secam
capture:
Defines the index number of the capture source, starting from 0. The first capture device is always 0.
The VideoTexutre modules knows that you want to start a live video capture when you set this parameter to a number >= 0. Setting this parameter < 0 indicates a video file playback. Default value is -1.
rate:
the capture frame rate, by default 25 frames/sec
width:
height:
Width and height of the video capture in pixel, default value 0.
In Windows you must specify these values and they must fit with the capture device capability.
For example, if you have a webcam that can capture at 160x120, 320x240 or 640x480,
you must specify one of these couple of values or the opening of the video source will fail.
In Linux, default values are provided by the VideoForLinux driver if you don't specify width and height.
Simple example
**************
1. Texture definition script:
import VideoTexture
contr = GameLogic.getCurrentController()
obj = contr.getOwner()
if not hasattr(GameLogic, 'video'):
matID = VideoTexture.materialID(obj, 'MAVideoMat')
GameLogic.video = VideoTexture.Texture(obj, matID)
GameLogic.vidSrc = VideoTexture.VideoFFmpeg('trailer_400p.ogg')
# Streaming is also possible:
#GameLogic.vidSrc = VideoTexture.VideoFFmpeg('http://10.32.1.10/trailer_400p.ogg')
GameLogic.vidSrc.repeat = -1
# If the video dimensions are not a power of 2, scaling must be done before
# sending the texture to the GPU. This is done by default with gluScaleImage()
# but you can also use a faster, but less precise, scaling by setting scale
# to True. Best approach is to convert the video offline and set the dimensions right.
GameLogic.vidSrc.scale = True
# FFmpeg always delivers the video image upside down, so flipping is enabled automatically
#GameLogic.vidSrc.flip = True
if contr.getSensors()[0].isPositive():
GameLogic.video.source = GameLogic.vidSrc
GameLogic.vidSrc.play()
2. Texture refresh script:
obj = GameLogic.getCurrentController().getOwner()
if hasattr(GameLogic, 'video') != 0:
GameLogic.video.refresh(True)
You can download this demo here:
http://home.scarlet.be/~tsi46445/blender/VideoTextureDemo.blend
http://home.scarlet.be/~tsi46445/blender/trailer_400p.ogg
2008-10-31 22:35:52 +00:00
|
|
|
|
|
|
|
// Texture object initialization
|
|
|
|
int Texture_init (Texture *self, PyObject *args, PyObject *kwds)
|
|
|
|
{
|
|
|
|
// parameters - game object with video texture
|
|
|
|
PyObject * obj = NULL;
|
|
|
|
// material ID
|
|
|
|
short matID = 0;
|
|
|
|
// texture ID
|
|
|
|
short texID = 0;
|
|
|
|
// texture object with shared texture ID
|
|
|
|
Texture * texObj = NULL;
|
|
|
|
|
2010-02-16 16:47:41 +00:00
|
|
|
static const char *kwlist[] = {"gameObj", "materialID", "textureID", "textureObj", NULL};
|
VideoTexture module.
The only compilation system that works for sure is the MSVC project files. I've tried my best to
update the other compilation system but I count on the community to check and fix them.
This is Zdeno Miklas video texture plugin ported to trunk.
The original plugin API is maintained (can be found here http://home.scarlet.be/~tsi46445/blender/blendVideoTex.html)
EXCEPT for the following:
The module name is changed to VideoTexture (instead of blendVideoTex).
A new (and only) video source is now available: VideoFFmpeg()
You must pass 1 to 4 arguments when you create it (you can use named arguments):
VideoFFmpeg(file) : play a video file
VideoFFmpeg(file, capture, rate, width, height) : start a live video capture
file:
In the first form, file is a video file name, relative to startup directory.
It can also be a URL, FFmpeg will happily stream a video from a network source.
In the second form, file is empty or is a hint for the format of the video capture.
In Windows, file is ignored and should be empty or not specified.
In Linux, ffmpeg supports two types of device: VideoForLinux and DV1394.
The user specifies the type of device with the file parameter:
[<device_type>][:<standard>]
<device_type> : 'v4l' for VideoForLinux, 'dv1394' for DV1394; default to 'v4l'
<standard> : 'pal', 'secam' or 'ntsc', default to 'ntsc'
The driver name is constructed automatically from the device types:
v4l : /dev/video<capture>
dv1394: /dev/dv1394/<capture>
If you have different driver name, you can specify the driver name explicitely
instead of device type. Examples of valid file parameter:
/dev/v4l/video0:pal
/dev/ieee1394/1:ntsc
dv1394:ntsc
v4l:pal
:secam
capture:
Defines the index number of the capture source, starting from 0. The first capture device is always 0.
The VideoTexutre modules knows that you want to start a live video capture when you set this parameter to a number >= 0. Setting this parameter < 0 indicates a video file playback. Default value is -1.
rate:
the capture frame rate, by default 25 frames/sec
width:
height:
Width and height of the video capture in pixel, default value 0.
In Windows you must specify these values and they must fit with the capture device capability.
For example, if you have a webcam that can capture at 160x120, 320x240 or 640x480,
you must specify one of these couple of values or the opening of the video source will fail.
In Linux, default values are provided by the VideoForLinux driver if you don't specify width and height.
Simple example
**************
1. Texture definition script:
import VideoTexture
contr = GameLogic.getCurrentController()
obj = contr.getOwner()
if not hasattr(GameLogic, 'video'):
matID = VideoTexture.materialID(obj, 'MAVideoMat')
GameLogic.video = VideoTexture.Texture(obj, matID)
GameLogic.vidSrc = VideoTexture.VideoFFmpeg('trailer_400p.ogg')
# Streaming is also possible:
#GameLogic.vidSrc = VideoTexture.VideoFFmpeg('http://10.32.1.10/trailer_400p.ogg')
GameLogic.vidSrc.repeat = -1
# If the video dimensions are not a power of 2, scaling must be done before
# sending the texture to the GPU. This is done by default with gluScaleImage()
# but you can also use a faster, but less precise, scaling by setting scale
# to True. Best approach is to convert the video offline and set the dimensions right.
GameLogic.vidSrc.scale = True
# FFmpeg always delivers the video image upside down, so flipping is enabled automatically
#GameLogic.vidSrc.flip = True
if contr.getSensors()[0].isPositive():
GameLogic.video.source = GameLogic.vidSrc
GameLogic.vidSrc.play()
2. Texture refresh script:
obj = GameLogic.getCurrentController().getOwner()
if hasattr(GameLogic, 'video') != 0:
GameLogic.video.refresh(True)
You can download this demo here:
http://home.scarlet.be/~tsi46445/blender/VideoTextureDemo.blend
http://home.scarlet.be/~tsi46445/blender/trailer_400p.ogg
2008-10-31 22:35:52 +00:00
|
|
|
|
|
|
|
// get parameters
|
2010-02-16 16:47:41 +00:00
|
|
|
if (!PyArg_ParseTupleAndKeywords(args, kwds, "O|hhO!",
|
|
|
|
const_cast<char**>(kwlist), &obj, &matID, &texID, &TextureType,
|
|
|
|
&texObj))
|
VideoTexture module.
The only compilation system that works for sure is the MSVC project files. I've tried my best to
update the other compilation system but I count on the community to check and fix them.
This is Zdeno Miklas video texture plugin ported to trunk.
The original plugin API is maintained (can be found here http://home.scarlet.be/~tsi46445/blender/blendVideoTex.html)
EXCEPT for the following:
The module name is changed to VideoTexture (instead of blendVideoTex).
A new (and only) video source is now available: VideoFFmpeg()
You must pass 1 to 4 arguments when you create it (you can use named arguments):
VideoFFmpeg(file) : play a video file
VideoFFmpeg(file, capture, rate, width, height) : start a live video capture
file:
In the first form, file is a video file name, relative to startup directory.
It can also be a URL, FFmpeg will happily stream a video from a network source.
In the second form, file is empty or is a hint for the format of the video capture.
In Windows, file is ignored and should be empty or not specified.
In Linux, ffmpeg supports two types of device: VideoForLinux and DV1394.
The user specifies the type of device with the file parameter:
[<device_type>][:<standard>]
<device_type> : 'v4l' for VideoForLinux, 'dv1394' for DV1394; default to 'v4l'
<standard> : 'pal', 'secam' or 'ntsc', default to 'ntsc'
The driver name is constructed automatically from the device types:
v4l : /dev/video<capture>
dv1394: /dev/dv1394/<capture>
If you have different driver name, you can specify the driver name explicitely
instead of device type. Examples of valid file parameter:
/dev/v4l/video0:pal
/dev/ieee1394/1:ntsc
dv1394:ntsc
v4l:pal
:secam
capture:
Defines the index number of the capture source, starting from 0. The first capture device is always 0.
The VideoTexutre modules knows that you want to start a live video capture when you set this parameter to a number >= 0. Setting this parameter < 0 indicates a video file playback. Default value is -1.
rate:
the capture frame rate, by default 25 frames/sec
width:
height:
Width and height of the video capture in pixel, default value 0.
In Windows you must specify these values and they must fit with the capture device capability.
For example, if you have a webcam that can capture at 160x120, 320x240 or 640x480,
you must specify one of these couple of values or the opening of the video source will fail.
In Linux, default values are provided by the VideoForLinux driver if you don't specify width and height.
Simple example
**************
1. Texture definition script:
import VideoTexture
contr = GameLogic.getCurrentController()
obj = contr.getOwner()
if not hasattr(GameLogic, 'video'):
matID = VideoTexture.materialID(obj, 'MAVideoMat')
GameLogic.video = VideoTexture.Texture(obj, matID)
GameLogic.vidSrc = VideoTexture.VideoFFmpeg('trailer_400p.ogg')
# Streaming is also possible:
#GameLogic.vidSrc = VideoTexture.VideoFFmpeg('http://10.32.1.10/trailer_400p.ogg')
GameLogic.vidSrc.repeat = -1
# If the video dimensions are not a power of 2, scaling must be done before
# sending the texture to the GPU. This is done by default with gluScaleImage()
# but you can also use a faster, but less precise, scaling by setting scale
# to True. Best approach is to convert the video offline and set the dimensions right.
GameLogic.vidSrc.scale = True
# FFmpeg always delivers the video image upside down, so flipping is enabled automatically
#GameLogic.vidSrc.flip = True
if contr.getSensors()[0].isPositive():
GameLogic.video.source = GameLogic.vidSrc
GameLogic.vidSrc.play()
2. Texture refresh script:
obj = GameLogic.getCurrentController().getOwner()
if hasattr(GameLogic, 'video') != 0:
GameLogic.video.refresh(True)
You can download this demo here:
http://home.scarlet.be/~tsi46445/blender/VideoTextureDemo.blend
http://home.scarlet.be/~tsi46445/blender/trailer_400p.ogg
2008-10-31 22:35:52 +00:00
|
|
|
return -1;
|
|
|
|
|
|
|
|
// if parameters are available
|
|
|
|
if (obj != NULL)
|
|
|
|
{
|
|
|
|
// process polygon material or blender material
|
|
|
|
try
|
|
|
|
{
|
|
|
|
// get pointer to texture image
|
|
|
|
RAS_IPolyMaterial * mat = getMaterial(obj, matID);
|
2012-05-01 02:50:17 +00:00
|
|
|
KX_LightObject * lamp = getLamp(obj);
|
VideoTexture module.
The only compilation system that works for sure is the MSVC project files. I've tried my best to
update the other compilation system but I count on the community to check and fix them.
This is Zdeno Miklas video texture plugin ported to trunk.
The original plugin API is maintained (can be found here http://home.scarlet.be/~tsi46445/blender/blendVideoTex.html)
EXCEPT for the following:
The module name is changed to VideoTexture (instead of blendVideoTex).
A new (and only) video source is now available: VideoFFmpeg()
You must pass 1 to 4 arguments when you create it (you can use named arguments):
VideoFFmpeg(file) : play a video file
VideoFFmpeg(file, capture, rate, width, height) : start a live video capture
file:
In the first form, file is a video file name, relative to startup directory.
It can also be a URL, FFmpeg will happily stream a video from a network source.
In the second form, file is empty or is a hint for the format of the video capture.
In Windows, file is ignored and should be empty or not specified.
In Linux, ffmpeg supports two types of device: VideoForLinux and DV1394.
The user specifies the type of device with the file parameter:
[<device_type>][:<standard>]
<device_type> : 'v4l' for VideoForLinux, 'dv1394' for DV1394; default to 'v4l'
<standard> : 'pal', 'secam' or 'ntsc', default to 'ntsc'
The driver name is constructed automatically from the device types:
v4l : /dev/video<capture>
dv1394: /dev/dv1394/<capture>
If you have different driver name, you can specify the driver name explicitely
instead of device type. Examples of valid file parameter:
/dev/v4l/video0:pal
/dev/ieee1394/1:ntsc
dv1394:ntsc
v4l:pal
:secam
capture:
Defines the index number of the capture source, starting from 0. The first capture device is always 0.
The VideoTexutre modules knows that you want to start a live video capture when you set this parameter to a number >= 0. Setting this parameter < 0 indicates a video file playback. Default value is -1.
rate:
the capture frame rate, by default 25 frames/sec
width:
height:
Width and height of the video capture in pixel, default value 0.
In Windows you must specify these values and they must fit with the capture device capability.
For example, if you have a webcam that can capture at 160x120, 320x240 or 640x480,
you must specify one of these couple of values or the opening of the video source will fail.
In Linux, default values are provided by the VideoForLinux driver if you don't specify width and height.
Simple example
**************
1. Texture definition script:
import VideoTexture
contr = GameLogic.getCurrentController()
obj = contr.getOwner()
if not hasattr(GameLogic, 'video'):
matID = VideoTexture.materialID(obj, 'MAVideoMat')
GameLogic.video = VideoTexture.Texture(obj, matID)
GameLogic.vidSrc = VideoTexture.VideoFFmpeg('trailer_400p.ogg')
# Streaming is also possible:
#GameLogic.vidSrc = VideoTexture.VideoFFmpeg('http://10.32.1.10/trailer_400p.ogg')
GameLogic.vidSrc.repeat = -1
# If the video dimensions are not a power of 2, scaling must be done before
# sending the texture to the GPU. This is done by default with gluScaleImage()
# but you can also use a faster, but less precise, scaling by setting scale
# to True. Best approach is to convert the video offline and set the dimensions right.
GameLogic.vidSrc.scale = True
# FFmpeg always delivers the video image upside down, so flipping is enabled automatically
#GameLogic.vidSrc.flip = True
if contr.getSensors()[0].isPositive():
GameLogic.video.source = GameLogic.vidSrc
GameLogic.vidSrc.play()
2. Texture refresh script:
obj = GameLogic.getCurrentController().getOwner()
if hasattr(GameLogic, 'video') != 0:
GameLogic.video.refresh(True)
You can download this demo here:
http://home.scarlet.be/~tsi46445/blender/VideoTextureDemo.blend
http://home.scarlet.be/~tsi46445/blender/trailer_400p.ogg
2008-10-31 22:35:52 +00:00
|
|
|
if (mat != NULL)
|
|
|
|
{
|
|
|
|
// is it blender material or polygon material
|
2008-11-05 13:22:10 +00:00
|
|
|
if (mat->GetFlag() & RAS_BLENDERGLSL)
|
|
|
|
{
|
|
|
|
self->m_imgTexture = static_cast<KX_BlenderMaterial*>(mat)->getImage(texID);
|
|
|
|
self->m_useMatTexture = false;
|
|
|
|
} else if (mat->GetFlag() & RAS_BLENDERMAT)
|
|
|
|
{
|
VideoTexture module.
The only compilation system that works for sure is the MSVC project files. I've tried my best to
update the other compilation system but I count on the community to check and fix them.
This is Zdeno Miklas video texture plugin ported to trunk.
The original plugin API is maintained (can be found here http://home.scarlet.be/~tsi46445/blender/blendVideoTex.html)
EXCEPT for the following:
The module name is changed to VideoTexture (instead of blendVideoTex).
A new (and only) video source is now available: VideoFFmpeg()
You must pass 1 to 4 arguments when you create it (you can use named arguments):
VideoFFmpeg(file) : play a video file
VideoFFmpeg(file, capture, rate, width, height) : start a live video capture
file:
In the first form, file is a video file name, relative to startup directory.
It can also be a URL, FFmpeg will happily stream a video from a network source.
In the second form, file is empty or is a hint for the format of the video capture.
In Windows, file is ignored and should be empty or not specified.
In Linux, ffmpeg supports two types of device: VideoForLinux and DV1394.
The user specifies the type of device with the file parameter:
[<device_type>][:<standard>]
<device_type> : 'v4l' for VideoForLinux, 'dv1394' for DV1394; default to 'v4l'
<standard> : 'pal', 'secam' or 'ntsc', default to 'ntsc'
The driver name is constructed automatically from the device types:
v4l : /dev/video<capture>
dv1394: /dev/dv1394/<capture>
If you have different driver name, you can specify the driver name explicitely
instead of device type. Examples of valid file parameter:
/dev/v4l/video0:pal
/dev/ieee1394/1:ntsc
dv1394:ntsc
v4l:pal
:secam
capture:
Defines the index number of the capture source, starting from 0. The first capture device is always 0.
The VideoTexutre modules knows that you want to start a live video capture when you set this parameter to a number >= 0. Setting this parameter < 0 indicates a video file playback. Default value is -1.
rate:
the capture frame rate, by default 25 frames/sec
width:
height:
Width and height of the video capture in pixel, default value 0.
In Windows you must specify these values and they must fit with the capture device capability.
For example, if you have a webcam that can capture at 160x120, 320x240 or 640x480,
you must specify one of these couple of values or the opening of the video source will fail.
In Linux, default values are provided by the VideoForLinux driver if you don't specify width and height.
Simple example
**************
1. Texture definition script:
import VideoTexture
contr = GameLogic.getCurrentController()
obj = contr.getOwner()
if not hasattr(GameLogic, 'video'):
matID = VideoTexture.materialID(obj, 'MAVideoMat')
GameLogic.video = VideoTexture.Texture(obj, matID)
GameLogic.vidSrc = VideoTexture.VideoFFmpeg('trailer_400p.ogg')
# Streaming is also possible:
#GameLogic.vidSrc = VideoTexture.VideoFFmpeg('http://10.32.1.10/trailer_400p.ogg')
GameLogic.vidSrc.repeat = -1
# If the video dimensions are not a power of 2, scaling must be done before
# sending the texture to the GPU. This is done by default with gluScaleImage()
# but you can also use a faster, but less precise, scaling by setting scale
# to True. Best approach is to convert the video offline and set the dimensions right.
GameLogic.vidSrc.scale = True
# FFmpeg always delivers the video image upside down, so flipping is enabled automatically
#GameLogic.vidSrc.flip = True
if contr.getSensors()[0].isPositive():
GameLogic.video.source = GameLogic.vidSrc
GameLogic.vidSrc.play()
2. Texture refresh script:
obj = GameLogic.getCurrentController().getOwner()
if hasattr(GameLogic, 'video') != 0:
GameLogic.video.refresh(True)
You can download this demo here:
http://home.scarlet.be/~tsi46445/blender/VideoTextureDemo.blend
http://home.scarlet.be/~tsi46445/blender/trailer_400p.ogg
2008-10-31 22:35:52 +00:00
|
|
|
// get blender material texture
|
|
|
|
self->m_matTexture = static_cast<KX_BlenderMaterial*>(mat)->getTex(texID);
|
2008-11-05 13:22:10 +00:00
|
|
|
self->m_useMatTexture = true;
|
|
|
|
}
|
VideoTexture module.
The only compilation system that works for sure is the MSVC project files. I've tried my best to
update the other compilation system but I count on the community to check and fix them.
This is Zdeno Miklas video texture plugin ported to trunk.
The original plugin API is maintained (can be found here http://home.scarlet.be/~tsi46445/blender/blendVideoTex.html)
EXCEPT for the following:
The module name is changed to VideoTexture (instead of blendVideoTex).
A new (and only) video source is now available: VideoFFmpeg()
You must pass 1 to 4 arguments when you create it (you can use named arguments):
VideoFFmpeg(file) : play a video file
VideoFFmpeg(file, capture, rate, width, height) : start a live video capture
file:
In the first form, file is a video file name, relative to startup directory.
It can also be a URL, FFmpeg will happily stream a video from a network source.
In the second form, file is empty or is a hint for the format of the video capture.
In Windows, file is ignored and should be empty or not specified.
In Linux, ffmpeg supports two types of device: VideoForLinux and DV1394.
The user specifies the type of device with the file parameter:
[<device_type>][:<standard>]
<device_type> : 'v4l' for VideoForLinux, 'dv1394' for DV1394; default to 'v4l'
<standard> : 'pal', 'secam' or 'ntsc', default to 'ntsc'
The driver name is constructed automatically from the device types:
v4l : /dev/video<capture>
dv1394: /dev/dv1394/<capture>
If you have different driver name, you can specify the driver name explicitely
instead of device type. Examples of valid file parameter:
/dev/v4l/video0:pal
/dev/ieee1394/1:ntsc
dv1394:ntsc
v4l:pal
:secam
capture:
Defines the index number of the capture source, starting from 0. The first capture device is always 0.
The VideoTexutre modules knows that you want to start a live video capture when you set this parameter to a number >= 0. Setting this parameter < 0 indicates a video file playback. Default value is -1.
rate:
the capture frame rate, by default 25 frames/sec
width:
height:
Width and height of the video capture in pixel, default value 0.
In Windows you must specify these values and they must fit with the capture device capability.
For example, if you have a webcam that can capture at 160x120, 320x240 or 640x480,
you must specify one of these couple of values or the opening of the video source will fail.
In Linux, default values are provided by the VideoForLinux driver if you don't specify width and height.
Simple example
**************
1. Texture definition script:
import VideoTexture
contr = GameLogic.getCurrentController()
obj = contr.getOwner()
if not hasattr(GameLogic, 'video'):
matID = VideoTexture.materialID(obj, 'MAVideoMat')
GameLogic.video = VideoTexture.Texture(obj, matID)
GameLogic.vidSrc = VideoTexture.VideoFFmpeg('trailer_400p.ogg')
# Streaming is also possible:
#GameLogic.vidSrc = VideoTexture.VideoFFmpeg('http://10.32.1.10/trailer_400p.ogg')
GameLogic.vidSrc.repeat = -1
# If the video dimensions are not a power of 2, scaling must be done before
# sending the texture to the GPU. This is done by default with gluScaleImage()
# but you can also use a faster, but less precise, scaling by setting scale
# to True. Best approach is to convert the video offline and set the dimensions right.
GameLogic.vidSrc.scale = True
# FFmpeg always delivers the video image upside down, so flipping is enabled automatically
#GameLogic.vidSrc.flip = True
if contr.getSensors()[0].isPositive():
GameLogic.video.source = GameLogic.vidSrc
GameLogic.vidSrc.play()
2. Texture refresh script:
obj = GameLogic.getCurrentController().getOwner()
if hasattr(GameLogic, 'video') != 0:
GameLogic.video.refresh(True)
You can download this demo here:
http://home.scarlet.be/~tsi46445/blender/VideoTextureDemo.blend
http://home.scarlet.be/~tsi46445/blender/trailer_400p.ogg
2008-10-31 22:35:52 +00:00
|
|
|
else
|
|
|
|
{
|
|
|
|
// get texture pointer from polygon material
|
|
|
|
MTFace * tface = static_cast<KX_PolygonMaterial*>(mat)->GetMTFace();
|
|
|
|
self->m_imgTexture = (Image*)tface->tpage;
|
2008-11-05 13:22:10 +00:00
|
|
|
self->m_useMatTexture = false;
|
VideoTexture module.
The only compilation system that works for sure is the MSVC project files. I've tried my best to
update the other compilation system but I count on the community to check and fix them.
This is Zdeno Miklas video texture plugin ported to trunk.
The original plugin API is maintained (can be found here http://home.scarlet.be/~tsi46445/blender/blendVideoTex.html)
EXCEPT for the following:
The module name is changed to VideoTexture (instead of blendVideoTex).
A new (and only) video source is now available: VideoFFmpeg()
You must pass 1 to 4 arguments when you create it (you can use named arguments):
VideoFFmpeg(file) : play a video file
VideoFFmpeg(file, capture, rate, width, height) : start a live video capture
file:
In the first form, file is a video file name, relative to startup directory.
It can also be a URL, FFmpeg will happily stream a video from a network source.
In the second form, file is empty or is a hint for the format of the video capture.
In Windows, file is ignored and should be empty or not specified.
In Linux, ffmpeg supports two types of device: VideoForLinux and DV1394.
The user specifies the type of device with the file parameter:
[<device_type>][:<standard>]
<device_type> : 'v4l' for VideoForLinux, 'dv1394' for DV1394; default to 'v4l'
<standard> : 'pal', 'secam' or 'ntsc', default to 'ntsc'
The driver name is constructed automatically from the device types:
v4l : /dev/video<capture>
dv1394: /dev/dv1394/<capture>
If you have different driver name, you can specify the driver name explicitely
instead of device type. Examples of valid file parameter:
/dev/v4l/video0:pal
/dev/ieee1394/1:ntsc
dv1394:ntsc
v4l:pal
:secam
capture:
Defines the index number of the capture source, starting from 0. The first capture device is always 0.
The VideoTexutre modules knows that you want to start a live video capture when you set this parameter to a number >= 0. Setting this parameter < 0 indicates a video file playback. Default value is -1.
rate:
the capture frame rate, by default 25 frames/sec
width:
height:
Width and height of the video capture in pixel, default value 0.
In Windows you must specify these values and they must fit with the capture device capability.
For example, if you have a webcam that can capture at 160x120, 320x240 or 640x480,
you must specify one of these couple of values or the opening of the video source will fail.
In Linux, default values are provided by the VideoForLinux driver if you don't specify width and height.
Simple example
**************
1. Texture definition script:
import VideoTexture
contr = GameLogic.getCurrentController()
obj = contr.getOwner()
if not hasattr(GameLogic, 'video'):
matID = VideoTexture.materialID(obj, 'MAVideoMat')
GameLogic.video = VideoTexture.Texture(obj, matID)
GameLogic.vidSrc = VideoTexture.VideoFFmpeg('trailer_400p.ogg')
# Streaming is also possible:
#GameLogic.vidSrc = VideoTexture.VideoFFmpeg('http://10.32.1.10/trailer_400p.ogg')
GameLogic.vidSrc.repeat = -1
# If the video dimensions are not a power of 2, scaling must be done before
# sending the texture to the GPU. This is done by default with gluScaleImage()
# but you can also use a faster, but less precise, scaling by setting scale
# to True. Best approach is to convert the video offline and set the dimensions right.
GameLogic.vidSrc.scale = True
# FFmpeg always delivers the video image upside down, so flipping is enabled automatically
#GameLogic.vidSrc.flip = True
if contr.getSensors()[0].isPositive():
GameLogic.video.source = GameLogic.vidSrc
GameLogic.vidSrc.play()
2. Texture refresh script:
obj = GameLogic.getCurrentController().getOwner()
if hasattr(GameLogic, 'video') != 0:
GameLogic.video.refresh(True)
You can download this demo here:
http://home.scarlet.be/~tsi46445/blender/VideoTextureDemo.blend
http://home.scarlet.be/~tsi46445/blender/trailer_400p.ogg
2008-10-31 22:35:52 +00:00
|
|
|
}
|
|
|
|
}
|
2012-05-01 02:50:17 +00:00
|
|
|
else if (lamp != NULL)
|
|
|
|
{
|
|
|
|
self->m_imgTexture = lamp->GetTextureImage(texID);
|
|
|
|
self->m_useMatTexture = false;
|
|
|
|
}
|
|
|
|
|
VideoTexture module.
The only compilation system that works for sure is the MSVC project files. I've tried my best to
update the other compilation system but I count on the community to check and fix them.
This is Zdeno Miklas video texture plugin ported to trunk.
The original plugin API is maintained (can be found here http://home.scarlet.be/~tsi46445/blender/blendVideoTex.html)
EXCEPT for the following:
The module name is changed to VideoTexture (instead of blendVideoTex).
A new (and only) video source is now available: VideoFFmpeg()
You must pass 1 to 4 arguments when you create it (you can use named arguments):
VideoFFmpeg(file) : play a video file
VideoFFmpeg(file, capture, rate, width, height) : start a live video capture
file:
In the first form, file is a video file name, relative to startup directory.
It can also be a URL, FFmpeg will happily stream a video from a network source.
In the second form, file is empty or is a hint for the format of the video capture.
In Windows, file is ignored and should be empty or not specified.
In Linux, ffmpeg supports two types of device: VideoForLinux and DV1394.
The user specifies the type of device with the file parameter:
[<device_type>][:<standard>]
<device_type> : 'v4l' for VideoForLinux, 'dv1394' for DV1394; default to 'v4l'
<standard> : 'pal', 'secam' or 'ntsc', default to 'ntsc'
The driver name is constructed automatically from the device types:
v4l : /dev/video<capture>
dv1394: /dev/dv1394/<capture>
If you have different driver name, you can specify the driver name explicitely
instead of device type. Examples of valid file parameter:
/dev/v4l/video0:pal
/dev/ieee1394/1:ntsc
dv1394:ntsc
v4l:pal
:secam
capture:
Defines the index number of the capture source, starting from 0. The first capture device is always 0.
The VideoTexutre modules knows that you want to start a live video capture when you set this parameter to a number >= 0. Setting this parameter < 0 indicates a video file playback. Default value is -1.
rate:
the capture frame rate, by default 25 frames/sec
width:
height:
Width and height of the video capture in pixel, default value 0.
In Windows you must specify these values and they must fit with the capture device capability.
For example, if you have a webcam that can capture at 160x120, 320x240 or 640x480,
you must specify one of these couple of values or the opening of the video source will fail.
In Linux, default values are provided by the VideoForLinux driver if you don't specify width and height.
Simple example
**************
1. Texture definition script:
import VideoTexture
contr = GameLogic.getCurrentController()
obj = contr.getOwner()
if not hasattr(GameLogic, 'video'):
matID = VideoTexture.materialID(obj, 'MAVideoMat')
GameLogic.video = VideoTexture.Texture(obj, matID)
GameLogic.vidSrc = VideoTexture.VideoFFmpeg('trailer_400p.ogg')
# Streaming is also possible:
#GameLogic.vidSrc = VideoTexture.VideoFFmpeg('http://10.32.1.10/trailer_400p.ogg')
GameLogic.vidSrc.repeat = -1
# If the video dimensions are not a power of 2, scaling must be done before
# sending the texture to the GPU. This is done by default with gluScaleImage()
# but you can also use a faster, but less precise, scaling by setting scale
# to True. Best approach is to convert the video offline and set the dimensions right.
GameLogic.vidSrc.scale = True
# FFmpeg always delivers the video image upside down, so flipping is enabled automatically
#GameLogic.vidSrc.flip = True
if contr.getSensors()[0].isPositive():
GameLogic.video.source = GameLogic.vidSrc
GameLogic.vidSrc.play()
2. Texture refresh script:
obj = GameLogic.getCurrentController().getOwner()
if hasattr(GameLogic, 'video') != 0:
GameLogic.video.refresh(True)
You can download this demo here:
http://home.scarlet.be/~tsi46445/blender/VideoTextureDemo.blend
http://home.scarlet.be/~tsi46445/blender/trailer_400p.ogg
2008-10-31 22:35:52 +00:00
|
|
|
// check if texture is available, if not, initialization failed
|
|
|
|
if (self->m_imgTexture == NULL && self->m_matTexture == NULL)
|
|
|
|
// throw exception if initialization failed
|
|
|
|
THRWEXCP(MaterialNotAvail, S_OK);
|
|
|
|
|
|
|
|
// if texture object is provided
|
|
|
|
if (texObj != NULL)
|
|
|
|
{
|
|
|
|
// copy texture code
|
|
|
|
self->m_actTex = texObj->m_actTex;
|
|
|
|
self->m_mipmap = texObj->m_mipmap;
|
|
|
|
if (texObj->m_source != NULL)
|
|
|
|
Texture_setSource(self, reinterpret_cast<PyObject*>(texObj->m_source), NULL);
|
|
|
|
}
|
|
|
|
else
|
|
|
|
// otherwise generate texture code
|
|
|
|
glGenTextures(1, (GLuint*)&self->m_actTex);
|
|
|
|
}
|
|
|
|
catch (Exception & exp)
|
|
|
|
{
|
|
|
|
exp.report();
|
|
|
|
return -1;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
// initialization succeded
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
|
|
// close added texture
|
|
|
|
PyObject * Texture_close(Texture * self)
|
|
|
|
{
|
|
|
|
// restore texture
|
|
|
|
if (self->m_orgSaved)
|
|
|
|
{
|
|
|
|
self->m_orgSaved = false;
|
|
|
|
// restore original texture code
|
2008-11-05 13:22:10 +00:00
|
|
|
if (self->m_useMatTexture)
|
VideoTexture module.
The only compilation system that works for sure is the MSVC project files. I've tried my best to
update the other compilation system but I count on the community to check and fix them.
This is Zdeno Miklas video texture plugin ported to trunk.
The original plugin API is maintained (can be found here http://home.scarlet.be/~tsi46445/blender/blendVideoTex.html)
EXCEPT for the following:
The module name is changed to VideoTexture (instead of blendVideoTex).
A new (and only) video source is now available: VideoFFmpeg()
You must pass 1 to 4 arguments when you create it (you can use named arguments):
VideoFFmpeg(file) : play a video file
VideoFFmpeg(file, capture, rate, width, height) : start a live video capture
file:
In the first form, file is a video file name, relative to startup directory.
It can also be a URL, FFmpeg will happily stream a video from a network source.
In the second form, file is empty or is a hint for the format of the video capture.
In Windows, file is ignored and should be empty or not specified.
In Linux, ffmpeg supports two types of device: VideoForLinux and DV1394.
The user specifies the type of device with the file parameter:
[<device_type>][:<standard>]
<device_type> : 'v4l' for VideoForLinux, 'dv1394' for DV1394; default to 'v4l'
<standard> : 'pal', 'secam' or 'ntsc', default to 'ntsc'
The driver name is constructed automatically from the device types:
v4l : /dev/video<capture>
dv1394: /dev/dv1394/<capture>
If you have different driver name, you can specify the driver name explicitely
instead of device type. Examples of valid file parameter:
/dev/v4l/video0:pal
/dev/ieee1394/1:ntsc
dv1394:ntsc
v4l:pal
:secam
capture:
Defines the index number of the capture source, starting from 0. The first capture device is always 0.
The VideoTexutre modules knows that you want to start a live video capture when you set this parameter to a number >= 0. Setting this parameter < 0 indicates a video file playback. Default value is -1.
rate:
the capture frame rate, by default 25 frames/sec
width:
height:
Width and height of the video capture in pixel, default value 0.
In Windows you must specify these values and they must fit with the capture device capability.
For example, if you have a webcam that can capture at 160x120, 320x240 or 640x480,
you must specify one of these couple of values or the opening of the video source will fail.
In Linux, default values are provided by the VideoForLinux driver if you don't specify width and height.
Simple example
**************
1. Texture definition script:
import VideoTexture
contr = GameLogic.getCurrentController()
obj = contr.getOwner()
if not hasattr(GameLogic, 'video'):
matID = VideoTexture.materialID(obj, 'MAVideoMat')
GameLogic.video = VideoTexture.Texture(obj, matID)
GameLogic.vidSrc = VideoTexture.VideoFFmpeg('trailer_400p.ogg')
# Streaming is also possible:
#GameLogic.vidSrc = VideoTexture.VideoFFmpeg('http://10.32.1.10/trailer_400p.ogg')
GameLogic.vidSrc.repeat = -1
# If the video dimensions are not a power of 2, scaling must be done before
# sending the texture to the GPU. This is done by default with gluScaleImage()
# but you can also use a faster, but less precise, scaling by setting scale
# to True. Best approach is to convert the video offline and set the dimensions right.
GameLogic.vidSrc.scale = True
# FFmpeg always delivers the video image upside down, so flipping is enabled automatically
#GameLogic.vidSrc.flip = True
if contr.getSensors()[0].isPositive():
GameLogic.video.source = GameLogic.vidSrc
GameLogic.vidSrc.play()
2. Texture refresh script:
obj = GameLogic.getCurrentController().getOwner()
if hasattr(GameLogic, 'video') != 0:
GameLogic.video.refresh(True)
You can download this demo here:
http://home.scarlet.be/~tsi46445/blender/VideoTextureDemo.blend
http://home.scarlet.be/~tsi46445/blender/trailer_400p.ogg
2008-10-31 22:35:52 +00:00
|
|
|
self->m_matTexture->swapTexture(self->m_orgTex);
|
|
|
|
else
|
|
|
|
self->m_imgTexture->bindcode = self->m_orgTex;
|
|
|
|
// drop actual texture
|
|
|
|
if (self->m_actTex != 0)
|
|
|
|
{
|
|
|
|
glDeleteTextures(1, (GLuint *)&self->m_actTex);
|
|
|
|
self->m_actTex = 0;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
Py_RETURN_NONE;
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
|
|
// refresh texture
|
|
|
|
PyObject * Texture_refresh (Texture * self, PyObject * args)
|
|
|
|
{
|
|
|
|
// get parameter - refresh source
|
|
|
|
PyObject * param;
|
2010-02-07 19:18:00 +00:00
|
|
|
double ts = -1.0;
|
|
|
|
|
|
|
|
if (!PyArg_ParseTuple(args, "O|d:refresh", ¶m, &ts) || !PyBool_Check(param))
|
VideoTexture module.
The only compilation system that works for sure is the MSVC project files. I've tried my best to
update the other compilation system but I count on the community to check and fix them.
This is Zdeno Miklas video texture plugin ported to trunk.
The original plugin API is maintained (can be found here http://home.scarlet.be/~tsi46445/blender/blendVideoTex.html)
EXCEPT for the following:
The module name is changed to VideoTexture (instead of blendVideoTex).
A new (and only) video source is now available: VideoFFmpeg()
You must pass 1 to 4 arguments when you create it (you can use named arguments):
VideoFFmpeg(file) : play a video file
VideoFFmpeg(file, capture, rate, width, height) : start a live video capture
file:
In the first form, file is a video file name, relative to startup directory.
It can also be a URL, FFmpeg will happily stream a video from a network source.
In the second form, file is empty or is a hint for the format of the video capture.
In Windows, file is ignored and should be empty or not specified.
In Linux, ffmpeg supports two types of device: VideoForLinux and DV1394.
The user specifies the type of device with the file parameter:
[<device_type>][:<standard>]
<device_type> : 'v4l' for VideoForLinux, 'dv1394' for DV1394; default to 'v4l'
<standard> : 'pal', 'secam' or 'ntsc', default to 'ntsc'
The driver name is constructed automatically from the device types:
v4l : /dev/video<capture>
dv1394: /dev/dv1394/<capture>
If you have different driver name, you can specify the driver name explicitely
instead of device type. Examples of valid file parameter:
/dev/v4l/video0:pal
/dev/ieee1394/1:ntsc
dv1394:ntsc
v4l:pal
:secam
capture:
Defines the index number of the capture source, starting from 0. The first capture device is always 0.
The VideoTexutre modules knows that you want to start a live video capture when you set this parameter to a number >= 0. Setting this parameter < 0 indicates a video file playback. Default value is -1.
rate:
the capture frame rate, by default 25 frames/sec
width:
height:
Width and height of the video capture in pixel, default value 0.
In Windows you must specify these values and they must fit with the capture device capability.
For example, if you have a webcam that can capture at 160x120, 320x240 or 640x480,
you must specify one of these couple of values or the opening of the video source will fail.
In Linux, default values are provided by the VideoForLinux driver if you don't specify width and height.
Simple example
**************
1. Texture definition script:
import VideoTexture
contr = GameLogic.getCurrentController()
obj = contr.getOwner()
if not hasattr(GameLogic, 'video'):
matID = VideoTexture.materialID(obj, 'MAVideoMat')
GameLogic.video = VideoTexture.Texture(obj, matID)
GameLogic.vidSrc = VideoTexture.VideoFFmpeg('trailer_400p.ogg')
# Streaming is also possible:
#GameLogic.vidSrc = VideoTexture.VideoFFmpeg('http://10.32.1.10/trailer_400p.ogg')
GameLogic.vidSrc.repeat = -1
# If the video dimensions are not a power of 2, scaling must be done before
# sending the texture to the GPU. This is done by default with gluScaleImage()
# but you can also use a faster, but less precise, scaling by setting scale
# to True. Best approach is to convert the video offline and set the dimensions right.
GameLogic.vidSrc.scale = True
# FFmpeg always delivers the video image upside down, so flipping is enabled automatically
#GameLogic.vidSrc.flip = True
if contr.getSensors()[0].isPositive():
GameLogic.video.source = GameLogic.vidSrc
GameLogic.vidSrc.play()
2. Texture refresh script:
obj = GameLogic.getCurrentController().getOwner()
if hasattr(GameLogic, 'video') != 0:
GameLogic.video.refresh(True)
You can download this demo here:
http://home.scarlet.be/~tsi46445/blender/VideoTextureDemo.blend
http://home.scarlet.be/~tsi46445/blender/trailer_400p.ogg
2008-10-31 22:35:52 +00:00
|
|
|
{
|
|
|
|
// report error
|
|
|
|
PyErr_SetString(PyExc_TypeError, "The value must be a bool");
|
|
|
|
return NULL;
|
|
|
|
}
|
|
|
|
// some trick here: we are in the business of loading a texture,
|
|
|
|
// no use to do it if we are still in the same rendering frame.
|
|
|
|
// We find this out by looking at the engine current clock time
|
|
|
|
KX_KetsjiEngine* engine = KX_GetActiveEngine();
|
|
|
|
if (engine->GetClockTime() != self->m_lastClock)
|
|
|
|
{
|
|
|
|
self->m_lastClock = engine->GetClockTime();
|
|
|
|
// set source refresh
|
|
|
|
bool refreshSource = (param == Py_True);
|
|
|
|
// try to proces texture from source
|
|
|
|
try
|
|
|
|
{
|
|
|
|
// if source is available
|
|
|
|
if (self->m_source != NULL)
|
|
|
|
{
|
|
|
|
// check texture code
|
|
|
|
if (!self->m_orgSaved)
|
|
|
|
{
|
|
|
|
self->m_orgSaved = true;
|
|
|
|
// save original image code
|
2008-11-05 13:22:10 +00:00
|
|
|
if (self->m_useMatTexture)
|
VideoTexture module.
The only compilation system that works for sure is the MSVC project files. I've tried my best to
update the other compilation system but I count on the community to check and fix them.
This is Zdeno Miklas video texture plugin ported to trunk.
The original plugin API is maintained (can be found here http://home.scarlet.be/~tsi46445/blender/blendVideoTex.html)
EXCEPT for the following:
The module name is changed to VideoTexture (instead of blendVideoTex).
A new (and only) video source is now available: VideoFFmpeg()
You must pass 1 to 4 arguments when you create it (you can use named arguments):
VideoFFmpeg(file) : play a video file
VideoFFmpeg(file, capture, rate, width, height) : start a live video capture
file:
In the first form, file is a video file name, relative to startup directory.
It can also be a URL, FFmpeg will happily stream a video from a network source.
In the second form, file is empty or is a hint for the format of the video capture.
In Windows, file is ignored and should be empty or not specified.
In Linux, ffmpeg supports two types of device: VideoForLinux and DV1394.
The user specifies the type of device with the file parameter:
[<device_type>][:<standard>]
<device_type> : 'v4l' for VideoForLinux, 'dv1394' for DV1394; default to 'v4l'
<standard> : 'pal', 'secam' or 'ntsc', default to 'ntsc'
The driver name is constructed automatically from the device types:
v4l : /dev/video<capture>
dv1394: /dev/dv1394/<capture>
If you have different driver name, you can specify the driver name explicitely
instead of device type. Examples of valid file parameter:
/dev/v4l/video0:pal
/dev/ieee1394/1:ntsc
dv1394:ntsc
v4l:pal
:secam
capture:
Defines the index number of the capture source, starting from 0. The first capture device is always 0.
The VideoTexutre modules knows that you want to start a live video capture when you set this parameter to a number >= 0. Setting this parameter < 0 indicates a video file playback. Default value is -1.
rate:
the capture frame rate, by default 25 frames/sec
width:
height:
Width and height of the video capture in pixel, default value 0.
In Windows you must specify these values and they must fit with the capture device capability.
For example, if you have a webcam that can capture at 160x120, 320x240 or 640x480,
you must specify one of these couple of values or the opening of the video source will fail.
In Linux, default values are provided by the VideoForLinux driver if you don't specify width and height.
Simple example
**************
1. Texture definition script:
import VideoTexture
contr = GameLogic.getCurrentController()
obj = contr.getOwner()
if not hasattr(GameLogic, 'video'):
matID = VideoTexture.materialID(obj, 'MAVideoMat')
GameLogic.video = VideoTexture.Texture(obj, matID)
GameLogic.vidSrc = VideoTexture.VideoFFmpeg('trailer_400p.ogg')
# Streaming is also possible:
#GameLogic.vidSrc = VideoTexture.VideoFFmpeg('http://10.32.1.10/trailer_400p.ogg')
GameLogic.vidSrc.repeat = -1
# If the video dimensions are not a power of 2, scaling must be done before
# sending the texture to the GPU. This is done by default with gluScaleImage()
# but you can also use a faster, but less precise, scaling by setting scale
# to True. Best approach is to convert the video offline and set the dimensions right.
GameLogic.vidSrc.scale = True
# FFmpeg always delivers the video image upside down, so flipping is enabled automatically
#GameLogic.vidSrc.flip = True
if contr.getSensors()[0].isPositive():
GameLogic.video.source = GameLogic.vidSrc
GameLogic.vidSrc.play()
2. Texture refresh script:
obj = GameLogic.getCurrentController().getOwner()
if hasattr(GameLogic, 'video') != 0:
GameLogic.video.refresh(True)
You can download this demo here:
http://home.scarlet.be/~tsi46445/blender/VideoTextureDemo.blend
http://home.scarlet.be/~tsi46445/blender/trailer_400p.ogg
2008-10-31 22:35:52 +00:00
|
|
|
self->m_orgTex = self->m_matTexture->swapTexture(self->m_actTex);
|
|
|
|
else
|
|
|
|
{
|
|
|
|
self->m_orgTex = self->m_imgTexture->bindcode;
|
|
|
|
self->m_imgTexture->bindcode = self->m_actTex;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
// get texture
|
2010-02-07 19:18:00 +00:00
|
|
|
unsigned int * texture = self->m_source->m_image->getImage(self->m_actTex, ts);
|
VideoTexture module.
The only compilation system that works for sure is the MSVC project files. I've tried my best to
update the other compilation system but I count on the community to check and fix them.
This is Zdeno Miklas video texture plugin ported to trunk.
The original plugin API is maintained (can be found here http://home.scarlet.be/~tsi46445/blender/blendVideoTex.html)
EXCEPT for the following:
The module name is changed to VideoTexture (instead of blendVideoTex).
A new (and only) video source is now available: VideoFFmpeg()
You must pass 1 to 4 arguments when you create it (you can use named arguments):
VideoFFmpeg(file) : play a video file
VideoFFmpeg(file, capture, rate, width, height) : start a live video capture
file:
In the first form, file is a video file name, relative to startup directory.
It can also be a URL, FFmpeg will happily stream a video from a network source.
In the second form, file is empty or is a hint for the format of the video capture.
In Windows, file is ignored and should be empty or not specified.
In Linux, ffmpeg supports two types of device: VideoForLinux and DV1394.
The user specifies the type of device with the file parameter:
[<device_type>][:<standard>]
<device_type> : 'v4l' for VideoForLinux, 'dv1394' for DV1394; default to 'v4l'
<standard> : 'pal', 'secam' or 'ntsc', default to 'ntsc'
The driver name is constructed automatically from the device types:
v4l : /dev/video<capture>
dv1394: /dev/dv1394/<capture>
If you have different driver name, you can specify the driver name explicitely
instead of device type. Examples of valid file parameter:
/dev/v4l/video0:pal
/dev/ieee1394/1:ntsc
dv1394:ntsc
v4l:pal
:secam
capture:
Defines the index number of the capture source, starting from 0. The first capture device is always 0.
The VideoTexutre modules knows that you want to start a live video capture when you set this parameter to a number >= 0. Setting this parameter < 0 indicates a video file playback. Default value is -1.
rate:
the capture frame rate, by default 25 frames/sec
width:
height:
Width and height of the video capture in pixel, default value 0.
In Windows you must specify these values and they must fit with the capture device capability.
For example, if you have a webcam that can capture at 160x120, 320x240 or 640x480,
you must specify one of these couple of values or the opening of the video source will fail.
In Linux, default values are provided by the VideoForLinux driver if you don't specify width and height.
Simple example
**************
1. Texture definition script:
import VideoTexture
contr = GameLogic.getCurrentController()
obj = contr.getOwner()
if not hasattr(GameLogic, 'video'):
matID = VideoTexture.materialID(obj, 'MAVideoMat')
GameLogic.video = VideoTexture.Texture(obj, matID)
GameLogic.vidSrc = VideoTexture.VideoFFmpeg('trailer_400p.ogg')
# Streaming is also possible:
#GameLogic.vidSrc = VideoTexture.VideoFFmpeg('http://10.32.1.10/trailer_400p.ogg')
GameLogic.vidSrc.repeat = -1
# If the video dimensions are not a power of 2, scaling must be done before
# sending the texture to the GPU. This is done by default with gluScaleImage()
# but you can also use a faster, but less precise, scaling by setting scale
# to True. Best approach is to convert the video offline and set the dimensions right.
GameLogic.vidSrc.scale = True
# FFmpeg always delivers the video image upside down, so flipping is enabled automatically
#GameLogic.vidSrc.flip = True
if contr.getSensors()[0].isPositive():
GameLogic.video.source = GameLogic.vidSrc
GameLogic.vidSrc.play()
2. Texture refresh script:
obj = GameLogic.getCurrentController().getOwner()
if hasattr(GameLogic, 'video') != 0:
GameLogic.video.refresh(True)
You can download this demo here:
http://home.scarlet.be/~tsi46445/blender/VideoTextureDemo.blend
http://home.scarlet.be/~tsi46445/blender/trailer_400p.ogg
2008-10-31 22:35:52 +00:00
|
|
|
// if texture is available
|
|
|
|
if (texture != NULL)
|
|
|
|
{
|
|
|
|
// get texture size
|
|
|
|
short * orgSize = self->m_source->m_image->getSize();
|
|
|
|
// calc scaled sizes
|
2011-11-24 19:27:15 +00:00
|
|
|
short size[2];
|
|
|
|
if (GLEW_ARB_texture_non_power_of_two)
|
|
|
|
{
|
|
|
|
size[0] = orgSize[0];
|
|
|
|
size[1] = orgSize[1];
|
|
|
|
}
|
|
|
|
else
|
|
|
|
{
|
|
|
|
size[0] = ImageBase::calcSize(orgSize[0]);
|
|
|
|
size[1] = ImageBase::calcSize(orgSize[1]);
|
|
|
|
}
|
VideoTexture module.
The only compilation system that works for sure is the MSVC project files. I've tried my best to
update the other compilation system but I count on the community to check and fix them.
This is Zdeno Miklas video texture plugin ported to trunk.
The original plugin API is maintained (can be found here http://home.scarlet.be/~tsi46445/blender/blendVideoTex.html)
EXCEPT for the following:
The module name is changed to VideoTexture (instead of blendVideoTex).
A new (and only) video source is now available: VideoFFmpeg()
You must pass 1 to 4 arguments when you create it (you can use named arguments):
VideoFFmpeg(file) : play a video file
VideoFFmpeg(file, capture, rate, width, height) : start a live video capture
file:
In the first form, file is a video file name, relative to startup directory.
It can also be a URL, FFmpeg will happily stream a video from a network source.
In the second form, file is empty or is a hint for the format of the video capture.
In Windows, file is ignored and should be empty or not specified.
In Linux, ffmpeg supports two types of device: VideoForLinux and DV1394.
The user specifies the type of device with the file parameter:
[<device_type>][:<standard>]
<device_type> : 'v4l' for VideoForLinux, 'dv1394' for DV1394; default to 'v4l'
<standard> : 'pal', 'secam' or 'ntsc', default to 'ntsc'
The driver name is constructed automatically from the device types:
v4l : /dev/video<capture>
dv1394: /dev/dv1394/<capture>
If you have different driver name, you can specify the driver name explicitely
instead of device type. Examples of valid file parameter:
/dev/v4l/video0:pal
/dev/ieee1394/1:ntsc
dv1394:ntsc
v4l:pal
:secam
capture:
Defines the index number of the capture source, starting from 0. The first capture device is always 0.
The VideoTexutre modules knows that you want to start a live video capture when you set this parameter to a number >= 0. Setting this parameter < 0 indicates a video file playback. Default value is -1.
rate:
the capture frame rate, by default 25 frames/sec
width:
height:
Width and height of the video capture in pixel, default value 0.
In Windows you must specify these values and they must fit with the capture device capability.
For example, if you have a webcam that can capture at 160x120, 320x240 or 640x480,
you must specify one of these couple of values or the opening of the video source will fail.
In Linux, default values are provided by the VideoForLinux driver if you don't specify width and height.
Simple example
**************
1. Texture definition script:
import VideoTexture
contr = GameLogic.getCurrentController()
obj = contr.getOwner()
if not hasattr(GameLogic, 'video'):
matID = VideoTexture.materialID(obj, 'MAVideoMat')
GameLogic.video = VideoTexture.Texture(obj, matID)
GameLogic.vidSrc = VideoTexture.VideoFFmpeg('trailer_400p.ogg')
# Streaming is also possible:
#GameLogic.vidSrc = VideoTexture.VideoFFmpeg('http://10.32.1.10/trailer_400p.ogg')
GameLogic.vidSrc.repeat = -1
# If the video dimensions are not a power of 2, scaling must be done before
# sending the texture to the GPU. This is done by default with gluScaleImage()
# but you can also use a faster, but less precise, scaling by setting scale
# to True. Best approach is to convert the video offline and set the dimensions right.
GameLogic.vidSrc.scale = True
# FFmpeg always delivers the video image upside down, so flipping is enabled automatically
#GameLogic.vidSrc.flip = True
if contr.getSensors()[0].isPositive():
GameLogic.video.source = GameLogic.vidSrc
GameLogic.vidSrc.play()
2. Texture refresh script:
obj = GameLogic.getCurrentController().getOwner()
if hasattr(GameLogic, 'video') != 0:
GameLogic.video.refresh(True)
You can download this demo here:
http://home.scarlet.be/~tsi46445/blender/VideoTextureDemo.blend
http://home.scarlet.be/~tsi46445/blender/trailer_400p.ogg
2008-10-31 22:35:52 +00:00
|
|
|
// scale texture if needed
|
|
|
|
if (size[0] != orgSize[0] || size[1] != orgSize[1])
|
|
|
|
{
|
|
|
|
// if scaled image buffer is smaller than needed
|
|
|
|
if (self->m_scaledImgSize < (unsigned int)(size[0] * size[1]))
|
|
|
|
{
|
|
|
|
// new size
|
|
|
|
self->m_scaledImgSize = size[0] * size[1];
|
|
|
|
// allocate scaling image
|
|
|
|
delete [] self->m_scaledImg;
|
|
|
|
self->m_scaledImg = new unsigned int[self->m_scaledImgSize];
|
|
|
|
}
|
|
|
|
// scale texture
|
|
|
|
gluScaleImage(GL_RGBA, orgSize[0], orgSize[1], GL_UNSIGNED_BYTE, texture,
|
|
|
|
size[0], size[1], GL_UNSIGNED_BYTE, self->m_scaledImg);
|
|
|
|
// use scaled image instead original
|
|
|
|
texture = self->m_scaledImg;
|
|
|
|
}
|
|
|
|
// load texture for rendering
|
|
|
|
loadTexture (self->m_actTex, texture, size, self->m_mipmap);
|
|
|
|
|
|
|
|
// refresh texture source, if required
|
|
|
|
if (refreshSource) self->m_source->m_image->refresh();
|
|
|
|
}
|
|
|
|
}
|
|
|
|
}
|
|
|
|
CATCH_EXCP;
|
|
|
|
}
|
|
|
|
Py_RETURN_NONE;
|
|
|
|
}
|
|
|
|
|
2010-03-20 00:11:25 +00:00
|
|
|
// get OpenGL Bind Id
|
|
|
|
PyObject * Texture_getBindId (Texture * self, void * closure)
|
|
|
|
{
|
|
|
|
unsigned int id = self->m_actTex;
|
|
|
|
return Py_BuildValue("h", id);
|
|
|
|
}
|
VideoTexture module.
The only compilation system that works for sure is the MSVC project files. I've tried my best to
update the other compilation system but I count on the community to check and fix them.
This is Zdeno Miklas video texture plugin ported to trunk.
The original plugin API is maintained (can be found here http://home.scarlet.be/~tsi46445/blender/blendVideoTex.html)
EXCEPT for the following:
The module name is changed to VideoTexture (instead of blendVideoTex).
A new (and only) video source is now available: VideoFFmpeg()
You must pass 1 to 4 arguments when you create it (you can use named arguments):
VideoFFmpeg(file) : play a video file
VideoFFmpeg(file, capture, rate, width, height) : start a live video capture
file:
In the first form, file is a video file name, relative to startup directory.
It can also be a URL, FFmpeg will happily stream a video from a network source.
In the second form, file is empty or is a hint for the format of the video capture.
In Windows, file is ignored and should be empty or not specified.
In Linux, ffmpeg supports two types of device: VideoForLinux and DV1394.
The user specifies the type of device with the file parameter:
[<device_type>][:<standard>]
<device_type> : 'v4l' for VideoForLinux, 'dv1394' for DV1394; default to 'v4l'
<standard> : 'pal', 'secam' or 'ntsc', default to 'ntsc'
The driver name is constructed automatically from the device types:
v4l : /dev/video<capture>
dv1394: /dev/dv1394/<capture>
If you have different driver name, you can specify the driver name explicitely
instead of device type. Examples of valid file parameter:
/dev/v4l/video0:pal
/dev/ieee1394/1:ntsc
dv1394:ntsc
v4l:pal
:secam
capture:
Defines the index number of the capture source, starting from 0. The first capture device is always 0.
The VideoTexutre modules knows that you want to start a live video capture when you set this parameter to a number >= 0. Setting this parameter < 0 indicates a video file playback. Default value is -1.
rate:
the capture frame rate, by default 25 frames/sec
width:
height:
Width and height of the video capture in pixel, default value 0.
In Windows you must specify these values and they must fit with the capture device capability.
For example, if you have a webcam that can capture at 160x120, 320x240 or 640x480,
you must specify one of these couple of values or the opening of the video source will fail.
In Linux, default values are provided by the VideoForLinux driver if you don't specify width and height.
Simple example
**************
1. Texture definition script:
import VideoTexture
contr = GameLogic.getCurrentController()
obj = contr.getOwner()
if not hasattr(GameLogic, 'video'):
matID = VideoTexture.materialID(obj, 'MAVideoMat')
GameLogic.video = VideoTexture.Texture(obj, matID)
GameLogic.vidSrc = VideoTexture.VideoFFmpeg('trailer_400p.ogg')
# Streaming is also possible:
#GameLogic.vidSrc = VideoTexture.VideoFFmpeg('http://10.32.1.10/trailer_400p.ogg')
GameLogic.vidSrc.repeat = -1
# If the video dimensions are not a power of 2, scaling must be done before
# sending the texture to the GPU. This is done by default with gluScaleImage()
# but you can also use a faster, but less precise, scaling by setting scale
# to True. Best approach is to convert the video offline and set the dimensions right.
GameLogic.vidSrc.scale = True
# FFmpeg always delivers the video image upside down, so flipping is enabled automatically
#GameLogic.vidSrc.flip = True
if contr.getSensors()[0].isPositive():
GameLogic.video.source = GameLogic.vidSrc
GameLogic.vidSrc.play()
2. Texture refresh script:
obj = GameLogic.getCurrentController().getOwner()
if hasattr(GameLogic, 'video') != 0:
GameLogic.video.refresh(True)
You can download this demo here:
http://home.scarlet.be/~tsi46445/blender/VideoTextureDemo.blend
http://home.scarlet.be/~tsi46445/blender/trailer_400p.ogg
2008-10-31 22:35:52 +00:00
|
|
|
|
|
|
|
// get mipmap value
|
|
|
|
PyObject * Texture_getMipmap (Texture * self, void * closure)
|
|
|
|
{
|
|
|
|
// return true if flag is set, otherwise false
|
|
|
|
if (self->m_mipmap) Py_RETURN_TRUE;
|
|
|
|
else Py_RETURN_FALSE;
|
|
|
|
}
|
|
|
|
|
|
|
|
// set mipmap value
|
|
|
|
int Texture_setMipmap (Texture * self, PyObject * value, void * closure)
|
|
|
|
{
|
|
|
|
// check parameter, report failure
|
|
|
|
if (value == NULL || !PyBool_Check(value))
|
|
|
|
{
|
|
|
|
PyErr_SetString(PyExc_TypeError, "The value must be a bool");
|
|
|
|
return -1;
|
|
|
|
}
|
|
|
|
// set mipmap
|
|
|
|
self->m_mipmap = value == Py_True;
|
|
|
|
// success
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
|
|
// get source object
|
|
|
|
PyObject * Texture_getSource (Texture * self, PyObject * value, void * closure)
|
|
|
|
{
|
|
|
|
// if source exists
|
|
|
|
if (self->m_source != NULL)
|
|
|
|
{
|
|
|
|
Py_INCREF(self->m_source);
|
|
|
|
return reinterpret_cast<PyObject*>(self->m_source);
|
|
|
|
}
|
|
|
|
// otherwise return None
|
|
|
|
Py_RETURN_NONE;
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
|
|
// set source object
|
|
|
|
int Texture_setSource (Texture * self, PyObject * value, void * closure)
|
|
|
|
{
|
|
|
|
// check new value
|
2011-11-03 13:10:37 +00:00
|
|
|
if (value == NULL || !pyImageTypes.in(Py_TYPE(value)))
|
VideoTexture module.
The only compilation system that works for sure is the MSVC project files. I've tried my best to
update the other compilation system but I count on the community to check and fix them.
This is Zdeno Miklas video texture plugin ported to trunk.
The original plugin API is maintained (can be found here http://home.scarlet.be/~tsi46445/blender/blendVideoTex.html)
EXCEPT for the following:
The module name is changed to VideoTexture (instead of blendVideoTex).
A new (and only) video source is now available: VideoFFmpeg()
You must pass 1 to 4 arguments when you create it (you can use named arguments):
VideoFFmpeg(file) : play a video file
VideoFFmpeg(file, capture, rate, width, height) : start a live video capture
file:
In the first form, file is a video file name, relative to startup directory.
It can also be a URL, FFmpeg will happily stream a video from a network source.
In the second form, file is empty or is a hint for the format of the video capture.
In Windows, file is ignored and should be empty or not specified.
In Linux, ffmpeg supports two types of device: VideoForLinux and DV1394.
The user specifies the type of device with the file parameter:
[<device_type>][:<standard>]
<device_type> : 'v4l' for VideoForLinux, 'dv1394' for DV1394; default to 'v4l'
<standard> : 'pal', 'secam' or 'ntsc', default to 'ntsc'
The driver name is constructed automatically from the device types:
v4l : /dev/video<capture>
dv1394: /dev/dv1394/<capture>
If you have different driver name, you can specify the driver name explicitely
instead of device type. Examples of valid file parameter:
/dev/v4l/video0:pal
/dev/ieee1394/1:ntsc
dv1394:ntsc
v4l:pal
:secam
capture:
Defines the index number of the capture source, starting from 0. The first capture device is always 0.
The VideoTexutre modules knows that you want to start a live video capture when you set this parameter to a number >= 0. Setting this parameter < 0 indicates a video file playback. Default value is -1.
rate:
the capture frame rate, by default 25 frames/sec
width:
height:
Width and height of the video capture in pixel, default value 0.
In Windows you must specify these values and they must fit with the capture device capability.
For example, if you have a webcam that can capture at 160x120, 320x240 or 640x480,
you must specify one of these couple of values or the opening of the video source will fail.
In Linux, default values are provided by the VideoForLinux driver if you don't specify width and height.
Simple example
**************
1. Texture definition script:
import VideoTexture
contr = GameLogic.getCurrentController()
obj = contr.getOwner()
if not hasattr(GameLogic, 'video'):
matID = VideoTexture.materialID(obj, 'MAVideoMat')
GameLogic.video = VideoTexture.Texture(obj, matID)
GameLogic.vidSrc = VideoTexture.VideoFFmpeg('trailer_400p.ogg')
# Streaming is also possible:
#GameLogic.vidSrc = VideoTexture.VideoFFmpeg('http://10.32.1.10/trailer_400p.ogg')
GameLogic.vidSrc.repeat = -1
# If the video dimensions are not a power of 2, scaling must be done before
# sending the texture to the GPU. This is done by default with gluScaleImage()
# but you can also use a faster, but less precise, scaling by setting scale
# to True. Best approach is to convert the video offline and set the dimensions right.
GameLogic.vidSrc.scale = True
# FFmpeg always delivers the video image upside down, so flipping is enabled automatically
#GameLogic.vidSrc.flip = True
if contr.getSensors()[0].isPositive():
GameLogic.video.source = GameLogic.vidSrc
GameLogic.vidSrc.play()
2. Texture refresh script:
obj = GameLogic.getCurrentController().getOwner()
if hasattr(GameLogic, 'video') != 0:
GameLogic.video.refresh(True)
You can download this demo here:
http://home.scarlet.be/~tsi46445/blender/VideoTextureDemo.blend
http://home.scarlet.be/~tsi46445/blender/trailer_400p.ogg
2008-10-31 22:35:52 +00:00
|
|
|
{
|
|
|
|
// report value error
|
|
|
|
PyErr_SetString(PyExc_TypeError, "Invalid type of value");
|
|
|
|
return -1;
|
|
|
|
}
|
|
|
|
// increase ref count for new value
|
|
|
|
Py_INCREF(value);
|
|
|
|
// release previous
|
|
|
|
Py_XDECREF(self->m_source);
|
|
|
|
// set new value
|
|
|
|
self->m_source = reinterpret_cast<PyImage*>(value);
|
|
|
|
// return success
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
|
|
// class Texture methods
|
|
|
|
static PyMethodDef textureMethods[] =
|
|
|
|
{
|
|
|
|
{ "close", (PyCFunction)Texture_close, METH_NOARGS, "Close dynamic texture and restore original"},
|
|
|
|
{ "refresh", (PyCFunction)Texture_refresh, METH_VARARGS, "Refresh texture from source"},
|
|
|
|
{NULL} /* Sentinel */
|
|
|
|
};
|
|
|
|
|
|
|
|
// class Texture attributes
|
|
|
|
static PyGetSetDef textureGetSets[] =
|
|
|
|
{
|
2008-11-04 09:21:27 +00:00
|
|
|
{(char*)"source", (getter)Texture_getSource, (setter)Texture_setSource, (char*)"source of texture", NULL},
|
|
|
|
{(char*)"mipmap", (getter)Texture_getMipmap, (setter)Texture_setMipmap, (char*)"mipmap texture", NULL},
|
2010-03-20 00:11:25 +00:00
|
|
|
{(char*)"bindId", (getter)Texture_getBindId, NULL, (char*)"OpenGL Bind Name", NULL},
|
VideoTexture module.
The only compilation system that works for sure is the MSVC project files. I've tried my best to
update the other compilation system but I count on the community to check and fix them.
This is Zdeno Miklas video texture plugin ported to trunk.
The original plugin API is maintained (can be found here http://home.scarlet.be/~tsi46445/blender/blendVideoTex.html)
EXCEPT for the following:
The module name is changed to VideoTexture (instead of blendVideoTex).
A new (and only) video source is now available: VideoFFmpeg()
You must pass 1 to 4 arguments when you create it (you can use named arguments):
VideoFFmpeg(file) : play a video file
VideoFFmpeg(file, capture, rate, width, height) : start a live video capture
file:
In the first form, file is a video file name, relative to startup directory.
It can also be a URL, FFmpeg will happily stream a video from a network source.
In the second form, file is empty or is a hint for the format of the video capture.
In Windows, file is ignored and should be empty or not specified.
In Linux, ffmpeg supports two types of device: VideoForLinux and DV1394.
The user specifies the type of device with the file parameter:
[<device_type>][:<standard>]
<device_type> : 'v4l' for VideoForLinux, 'dv1394' for DV1394; default to 'v4l'
<standard> : 'pal', 'secam' or 'ntsc', default to 'ntsc'
The driver name is constructed automatically from the device types:
v4l : /dev/video<capture>
dv1394: /dev/dv1394/<capture>
If you have different driver name, you can specify the driver name explicitely
instead of device type. Examples of valid file parameter:
/dev/v4l/video0:pal
/dev/ieee1394/1:ntsc
dv1394:ntsc
v4l:pal
:secam
capture:
Defines the index number of the capture source, starting from 0. The first capture device is always 0.
The VideoTexutre modules knows that you want to start a live video capture when you set this parameter to a number >= 0. Setting this parameter < 0 indicates a video file playback. Default value is -1.
rate:
the capture frame rate, by default 25 frames/sec
width:
height:
Width and height of the video capture in pixel, default value 0.
In Windows you must specify these values and they must fit with the capture device capability.
For example, if you have a webcam that can capture at 160x120, 320x240 or 640x480,
you must specify one of these couple of values or the opening of the video source will fail.
In Linux, default values are provided by the VideoForLinux driver if you don't specify width and height.
Simple example
**************
1. Texture definition script:
import VideoTexture
contr = GameLogic.getCurrentController()
obj = contr.getOwner()
if not hasattr(GameLogic, 'video'):
matID = VideoTexture.materialID(obj, 'MAVideoMat')
GameLogic.video = VideoTexture.Texture(obj, matID)
GameLogic.vidSrc = VideoTexture.VideoFFmpeg('trailer_400p.ogg')
# Streaming is also possible:
#GameLogic.vidSrc = VideoTexture.VideoFFmpeg('http://10.32.1.10/trailer_400p.ogg')
GameLogic.vidSrc.repeat = -1
# If the video dimensions are not a power of 2, scaling must be done before
# sending the texture to the GPU. This is done by default with gluScaleImage()
# but you can also use a faster, but less precise, scaling by setting scale
# to True. Best approach is to convert the video offline and set the dimensions right.
GameLogic.vidSrc.scale = True
# FFmpeg always delivers the video image upside down, so flipping is enabled automatically
#GameLogic.vidSrc.flip = True
if contr.getSensors()[0].isPositive():
GameLogic.video.source = GameLogic.vidSrc
GameLogic.vidSrc.play()
2. Texture refresh script:
obj = GameLogic.getCurrentController().getOwner()
if hasattr(GameLogic, 'video') != 0:
GameLogic.video.refresh(True)
You can download this demo here:
http://home.scarlet.be/~tsi46445/blender/VideoTextureDemo.blend
http://home.scarlet.be/~tsi46445/blender/trailer_400p.ogg
2008-10-31 22:35:52 +00:00
|
|
|
{NULL}
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
|
|
// class Texture declaration
|
|
|
|
PyTypeObject TextureType =
|
|
|
|
{
|
2009-06-08 20:08:19 +00:00
|
|
|
PyVarObject_HEAD_INIT(NULL, 0)
|
VideoTexture module.
The only compilation system that works for sure is the MSVC project files. I've tried my best to
update the other compilation system but I count on the community to check and fix them.
This is Zdeno Miklas video texture plugin ported to trunk.
The original plugin API is maintained (can be found here http://home.scarlet.be/~tsi46445/blender/blendVideoTex.html)
EXCEPT for the following:
The module name is changed to VideoTexture (instead of blendVideoTex).
A new (and only) video source is now available: VideoFFmpeg()
You must pass 1 to 4 arguments when you create it (you can use named arguments):
VideoFFmpeg(file) : play a video file
VideoFFmpeg(file, capture, rate, width, height) : start a live video capture
file:
In the first form, file is a video file name, relative to startup directory.
It can also be a URL, FFmpeg will happily stream a video from a network source.
In the second form, file is empty or is a hint for the format of the video capture.
In Windows, file is ignored and should be empty or not specified.
In Linux, ffmpeg supports two types of device: VideoForLinux and DV1394.
The user specifies the type of device with the file parameter:
[<device_type>][:<standard>]
<device_type> : 'v4l' for VideoForLinux, 'dv1394' for DV1394; default to 'v4l'
<standard> : 'pal', 'secam' or 'ntsc', default to 'ntsc'
The driver name is constructed automatically from the device types:
v4l : /dev/video<capture>
dv1394: /dev/dv1394/<capture>
If you have different driver name, you can specify the driver name explicitely
instead of device type. Examples of valid file parameter:
/dev/v4l/video0:pal
/dev/ieee1394/1:ntsc
dv1394:ntsc
v4l:pal
:secam
capture:
Defines the index number of the capture source, starting from 0. The first capture device is always 0.
The VideoTexutre modules knows that you want to start a live video capture when you set this parameter to a number >= 0. Setting this parameter < 0 indicates a video file playback. Default value is -1.
rate:
the capture frame rate, by default 25 frames/sec
width:
height:
Width and height of the video capture in pixel, default value 0.
In Windows you must specify these values and they must fit with the capture device capability.
For example, if you have a webcam that can capture at 160x120, 320x240 or 640x480,
you must specify one of these couple of values or the opening of the video source will fail.
In Linux, default values are provided by the VideoForLinux driver if you don't specify width and height.
Simple example
**************
1. Texture definition script:
import VideoTexture
contr = GameLogic.getCurrentController()
obj = contr.getOwner()
if not hasattr(GameLogic, 'video'):
matID = VideoTexture.materialID(obj, 'MAVideoMat')
GameLogic.video = VideoTexture.Texture(obj, matID)
GameLogic.vidSrc = VideoTexture.VideoFFmpeg('trailer_400p.ogg')
# Streaming is also possible:
#GameLogic.vidSrc = VideoTexture.VideoFFmpeg('http://10.32.1.10/trailer_400p.ogg')
GameLogic.vidSrc.repeat = -1
# If the video dimensions are not a power of 2, scaling must be done before
# sending the texture to the GPU. This is done by default with gluScaleImage()
# but you can also use a faster, but less precise, scaling by setting scale
# to True. Best approach is to convert the video offline and set the dimensions right.
GameLogic.vidSrc.scale = True
# FFmpeg always delivers the video image upside down, so flipping is enabled automatically
#GameLogic.vidSrc.flip = True
if contr.getSensors()[0].isPositive():
GameLogic.video.source = GameLogic.vidSrc
GameLogic.vidSrc.play()
2. Texture refresh script:
obj = GameLogic.getCurrentController().getOwner()
if hasattr(GameLogic, 'video') != 0:
GameLogic.video.refresh(True)
You can download this demo here:
http://home.scarlet.be/~tsi46445/blender/VideoTextureDemo.blend
http://home.scarlet.be/~tsi46445/blender/trailer_400p.ogg
2008-10-31 22:35:52 +00:00
|
|
|
"VideoTexture.Texture", /*tp_name*/
|
|
|
|
sizeof(Texture), /*tp_basicsize*/
|
|
|
|
0, /*tp_itemsize*/
|
|
|
|
(destructor)Texture_dealloc,/*tp_dealloc*/
|
|
|
|
0, /*tp_print*/
|
|
|
|
0, /*tp_getattr*/
|
|
|
|
0, /*tp_setattr*/
|
|
|
|
0, /*tp_compare*/
|
|
|
|
0, /*tp_repr*/
|
|
|
|
0, /*tp_as_number*/
|
|
|
|
0, /*tp_as_sequence*/
|
|
|
|
0, /*tp_as_mapping*/
|
|
|
|
0, /*tp_hash */
|
|
|
|
0, /*tp_call*/
|
|
|
|
0, /*tp_str*/
|
|
|
|
0, /*tp_getattro*/
|
|
|
|
0, /*tp_setattro*/
|
VideoTexture: improvements to image data access API.
- Use BGL buffer instead of string for image data.
- Add buffer interface to image source.
- Allow customization of pixel format.
- Add valid property to check if the image data is available.
The image property of all Image source objects will now
return a BGL 'buffer' object. Previously it was returning
a string, which was not working at all with Python 3.1.
The BGL buffer type allows sequence access to bytes and
is directly usable in BGL OpenGL wrapper functions.
The buffer is formated as a 1 dimensional array of bytes
with 4 bytes per pixel in RGBA order.
BGL buffers will also be accepted in the ImageBuff load()
and plot() functions.
It is possible to customize the pixel format by using
the VideoTexture.imageToArray(image, mode) function:
the first argument is a Image source object, the second
optional argument is a format string using the R, G, B,
A, 0 and 1 characters. For example "BGR" means that each
pixel will be 3 bytes, corresponding to the Blue, Green
and Red channel in that order. Use 0 for a fixed hex 00
value, 1 for hex FF. The default mode is "RGBA".
All Image source objects now support the buffer interface
which allows to create memoryview objects for direct access
to the image internal buffer without memory copy. The buffer
format is one dimensional array of bytes with 4 bytes per
pixel in RGBA order. The buffer is writable, which allows
custom modifications of the image data.
v = memoryview(source)
A bug in the Python 3.1 buffer API will cause a crash if
the memoryview object cannot be created. Therefore, you
must always check first that an image data is available
before creating a memoryview object. Use the new valid
attribute for that:
if source.valid:
v = memoryview(source)
...
Note: the BGL buffer object itself does not yet support
the buffer interface.
Note: the valid attribute makes sense only if you use
image source in conjunction with texture object like this:
# refresh texture but keep image data in memory
texture.refresh(False)
if texture.source.valid:
v = memoryview(texture.source)
# process image
...
# invalidate image for next texture refresh
texture.source.refresh()
Limitation: While memoryview objects exist, the image cannot be
resized. Resizing occurs with ImageViewport objects when the
viewport size is changed or with ImageFFmpeg when a new image
is reloaded for example. Any attempt to resize will cause a
runtime error. Delete the memoryview objects is you want to
resize an image source object.
2010-02-21 22:20:00 +00:00
|
|
|
&imageBufferProcs, /*tp_as_buffer*/
|
VideoTexture module.
The only compilation system that works for sure is the MSVC project files. I've tried my best to
update the other compilation system but I count on the community to check and fix them.
This is Zdeno Miklas video texture plugin ported to trunk.
The original plugin API is maintained (can be found here http://home.scarlet.be/~tsi46445/blender/blendVideoTex.html)
EXCEPT for the following:
The module name is changed to VideoTexture (instead of blendVideoTex).
A new (and only) video source is now available: VideoFFmpeg()
You must pass 1 to 4 arguments when you create it (you can use named arguments):
VideoFFmpeg(file) : play a video file
VideoFFmpeg(file, capture, rate, width, height) : start a live video capture
file:
In the first form, file is a video file name, relative to startup directory.
It can also be a URL, FFmpeg will happily stream a video from a network source.
In the second form, file is empty or is a hint for the format of the video capture.
In Windows, file is ignored and should be empty or not specified.
In Linux, ffmpeg supports two types of device: VideoForLinux and DV1394.
The user specifies the type of device with the file parameter:
[<device_type>][:<standard>]
<device_type> : 'v4l' for VideoForLinux, 'dv1394' for DV1394; default to 'v4l'
<standard> : 'pal', 'secam' or 'ntsc', default to 'ntsc'
The driver name is constructed automatically from the device types:
v4l : /dev/video<capture>
dv1394: /dev/dv1394/<capture>
If you have different driver name, you can specify the driver name explicitely
instead of device type. Examples of valid file parameter:
/dev/v4l/video0:pal
/dev/ieee1394/1:ntsc
dv1394:ntsc
v4l:pal
:secam
capture:
Defines the index number of the capture source, starting from 0. The first capture device is always 0.
The VideoTexutre modules knows that you want to start a live video capture when you set this parameter to a number >= 0. Setting this parameter < 0 indicates a video file playback. Default value is -1.
rate:
the capture frame rate, by default 25 frames/sec
width:
height:
Width and height of the video capture in pixel, default value 0.
In Windows you must specify these values and they must fit with the capture device capability.
For example, if you have a webcam that can capture at 160x120, 320x240 or 640x480,
you must specify one of these couple of values or the opening of the video source will fail.
In Linux, default values are provided by the VideoForLinux driver if you don't specify width and height.
Simple example
**************
1. Texture definition script:
import VideoTexture
contr = GameLogic.getCurrentController()
obj = contr.getOwner()
if not hasattr(GameLogic, 'video'):
matID = VideoTexture.materialID(obj, 'MAVideoMat')
GameLogic.video = VideoTexture.Texture(obj, matID)
GameLogic.vidSrc = VideoTexture.VideoFFmpeg('trailer_400p.ogg')
# Streaming is also possible:
#GameLogic.vidSrc = VideoTexture.VideoFFmpeg('http://10.32.1.10/trailer_400p.ogg')
GameLogic.vidSrc.repeat = -1
# If the video dimensions are not a power of 2, scaling must be done before
# sending the texture to the GPU. This is done by default with gluScaleImage()
# but you can also use a faster, but less precise, scaling by setting scale
# to True. Best approach is to convert the video offline and set the dimensions right.
GameLogic.vidSrc.scale = True
# FFmpeg always delivers the video image upside down, so flipping is enabled automatically
#GameLogic.vidSrc.flip = True
if contr.getSensors()[0].isPositive():
GameLogic.video.source = GameLogic.vidSrc
GameLogic.vidSrc.play()
2. Texture refresh script:
obj = GameLogic.getCurrentController().getOwner()
if hasattr(GameLogic, 'video') != 0:
GameLogic.video.refresh(True)
You can download this demo here:
http://home.scarlet.be/~tsi46445/blender/VideoTextureDemo.blend
http://home.scarlet.be/~tsi46445/blender/trailer_400p.ogg
2008-10-31 22:35:52 +00:00
|
|
|
Py_TPFLAGS_DEFAULT, /*tp_flags*/
|
|
|
|
"Texture objects", /* tp_doc */
|
|
|
|
0, /* tp_traverse */
|
|
|
|
0, /* tp_clear */
|
|
|
|
0, /* tp_richcompare */
|
|
|
|
0, /* tp_weaklistoffset */
|
|
|
|
0, /* tp_iter */
|
|
|
|
0, /* tp_iternext */
|
|
|
|
textureMethods, /* tp_methods */
|
|
|
|
0, /* tp_members */
|
|
|
|
textureGetSets, /* tp_getset */
|
|
|
|
0, /* tp_base */
|
|
|
|
0, /* tp_dict */
|
|
|
|
0, /* tp_descr_get */
|
|
|
|
0, /* tp_descr_set */
|
|
|
|
0, /* tp_dictoffset */
|
|
|
|
(initproc)Texture_init, /* tp_init */
|
|
|
|
0, /* tp_alloc */
|
|
|
|
Texture_new, /* tp_new */
|
|
|
|
};
|