blender/release/scripts/startup/keyingsets_builtins.py

520 lines
17 KiB
Python
Raw Normal View History

2011-02-04 09:27:25 +00:00
# ##### BEGIN GPL LICENSE BLOCK #####
#
# This program is free software; you can redistribute it and/or
# modify it under the terms of the GNU General Public License
# as published by the Free Software Foundation; either version 2
# of the License, or (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software Foundation,
# Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
#
# ##### END GPL LICENSE BLOCK #####
# <pep8 compliant>
"""
Built-In Keying Sets
None of these Keying Sets should be removed, as these
are needed by various parts of Blender in order for them
to work correctly.
Beware also about changing the order that these are defined
here, since this can result in old files referring to the
wrong Keying Set as the active one, potentially resulting
in lost (i.e. unkeyed) animation.
2011-02-04 09:27:25 +00:00
"""
== Massive Keying Sets Recode == After a few days of wrong turns and learning the finer points of RNA-type-subclassing the hard way, this commit finally presents a refactored version of the Keying Sets system (now version 2) based on some requirements from Cessen. For a more thorough discussion of this commit, see http://sites.google.com/site/aligorith/keyingsets_2.pdf?attredirects=0&d=1 ------ The main highlight of this refactor is that relative Keying Sets have now been recoded so that Python callbacks are run to generate the Keying Set's list of paths everytime the Keying Set is used (to insert or delete keyframes), allowing complex heuristics to be used to determine whether a property gets keyframed based on the current context. These checks may include checking on selection status of related entities, or transform locks. Built-In KeyingSets have also been recoded, and moved from C and out into Python. These are now coded as Relative Keying Sets, and can to some extent serve as basis for adding new relative Keying Sets. However, these have mostly been coded in a slightly 'modular' way which may be confusing for those not so familiar with Python in general. A usable template will be added soon for more general usage. Keyframing settings (i.e. 'visual', 'needed') can now be specified on a per-path basis now, which is especially useful for Absolute Keying Sets, where control over this is often beneficial. Most of the places where Auto-Keyframing is performed have been tidied up for consistency. I'm sure quite a few issues still exist there, but these I'll clean up over the next few days.
2010-03-16 06:18:49 +00:00
import bpy
import keyingsets_utils
from bpy.types import KeyingSetInfo
== Massive Keying Sets Recode == After a few days of wrong turns and learning the finer points of RNA-type-subclassing the hard way, this commit finally presents a refactored version of the Keying Sets system (now version 2) based on some requirements from Cessen. For a more thorough discussion of this commit, see http://sites.google.com/site/aligorith/keyingsets_2.pdf?attredirects=0&d=1 ------ The main highlight of this refactor is that relative Keying Sets have now been recoded so that Python callbacks are run to generate the Keying Set's list of paths everytime the Keying Set is used (to insert or delete keyframes), allowing complex heuristics to be used to determine whether a property gets keyframed based on the current context. These checks may include checking on selection status of related entities, or transform locks. Built-In KeyingSets have also been recoded, and moved from C and out into Python. These are now coded as Relative Keying Sets, and can to some extent serve as basis for adding new relative Keying Sets. However, these have mostly been coded in a slightly 'modular' way which may be confusing for those not so familiar with Python in general. A usable template will be added soon for more general usage. Keyframing settings (i.e. 'visual', 'needed') can now be specified on a per-path basis now, which is especially useful for Absolute Keying Sets, where control over this is often beneficial. Most of the places where Auto-Keyframing is performed have been tidied up for consistency. I'm sure quite a few issues still exist there, but these I'll clean up over the next few days.
2010-03-16 06:18:49 +00:00
###############################
# Built-In KeyingSets
2011-02-04 09:27:25 +00:00
# "Defines"
# Keep these in sync with those in ED_keyframing.h!
ANIM_KS_LOCATION_ID = "Location"
ANIM_KS_ROTATION_ID = "Rotation"
ANIM_KS_SCALING_ID = "Scaling"
ANIM_KS_LOC_ROT_SCALE_ID = "LocRotScale"
ANIM_KS_AVAILABLE_ID = "Available"
ANIM_KS_WHOLE_CHARACTER_ID = "WholeCharacter"
== Massive Keying Sets Recode == After a few days of wrong turns and learning the finer points of RNA-type-subclassing the hard way, this commit finally presents a refactored version of the Keying Sets system (now version 2) based on some requirements from Cessen. For a more thorough discussion of this commit, see http://sites.google.com/site/aligorith/keyingsets_2.pdf?attredirects=0&d=1 ------ The main highlight of this refactor is that relative Keying Sets have now been recoded so that Python callbacks are run to generate the Keying Set's list of paths everytime the Keying Set is used (to insert or delete keyframes), allowing complex heuristics to be used to determine whether a property gets keyframed based on the current context. These checks may include checking on selection status of related entities, or transform locks. Built-In KeyingSets have also been recoded, and moved from C and out into Python. These are now coded as Relative Keying Sets, and can to some extent serve as basis for adding new relative Keying Sets. However, these have mostly been coded in a slightly 'modular' way which may be confusing for those not so familiar with Python in general. A usable template will be added soon for more general usage. Keyframing settings (i.e. 'visual', 'needed') can now be specified on a per-path basis now, which is especially useful for Absolute Keying Sets, where control over this is often beneficial. Most of the places where Auto-Keyframing is performed have been tidied up for consistency. I'm sure quite a few issues still exist there, but these I'll clean up over the next few days.
2010-03-16 06:18:49 +00:00
# Location
class BUILTIN_KSI_Location(KeyingSetInfo):
"""Insert a keyframe on each of the location channels"""
bl_idname = ANIM_KS_LOCATION_ID
2010-09-23 07:50:52 +00:00
bl_label = "Location"
# poll - use predefined callback for selected bones/objects
poll = keyingsets_utils.RKS_POLL_selected_items
2010-09-23 07:50:52 +00:00
# iterator - use callback for selected bones/objects
iterator = keyingsets_utils.RKS_ITER_selected_item
2010-09-23 07:50:52 +00:00
2011-02-04 09:27:25 +00:00
# generator - use callback for location
generate = keyingsets_utils.RKS_GEN_location
2010-09-23 07:50:52 +00:00
2011-02-04 09:27:25 +00:00
== Massive Keying Sets Recode == After a few days of wrong turns and learning the finer points of RNA-type-subclassing the hard way, this commit finally presents a refactored version of the Keying Sets system (now version 2) based on some requirements from Cessen. For a more thorough discussion of this commit, see http://sites.google.com/site/aligorith/keyingsets_2.pdf?attredirects=0&d=1 ------ The main highlight of this refactor is that relative Keying Sets have now been recoded so that Python callbacks are run to generate the Keying Set's list of paths everytime the Keying Set is used (to insert or delete keyframes), allowing complex heuristics to be used to determine whether a property gets keyframed based on the current context. These checks may include checking on selection status of related entities, or transform locks. Built-In KeyingSets have also been recoded, and moved from C and out into Python. These are now coded as Relative Keying Sets, and can to some extent serve as basis for adding new relative Keying Sets. However, these have mostly been coded in a slightly 'modular' way which may be confusing for those not so familiar with Python in general. A usable template will be added soon for more general usage. Keyframing settings (i.e. 'visual', 'needed') can now be specified on a per-path basis now, which is especially useful for Absolute Keying Sets, where control over this is often beneficial. Most of the places where Auto-Keyframing is performed have been tidied up for consistency. I'm sure quite a few issues still exist there, but these I'll clean up over the next few days.
2010-03-16 06:18:49 +00:00
# Rotation
class BUILTIN_KSI_Rotation(KeyingSetInfo):
"""Insert a keyframe on each of the rotation channels"""
bl_idname = ANIM_KS_ROTATION_ID
2010-09-23 07:50:52 +00:00
bl_label = "Rotation"
# poll - use predefined callback for selected bones/objects
poll = keyingsets_utils.RKS_POLL_selected_items
2010-09-23 07:50:52 +00:00
# iterator - use callback for selected bones/objects
iterator = keyingsets_utils.RKS_ITER_selected_item
2010-09-23 07:50:52 +00:00
# generator - use callback for rotation
generate = keyingsets_utils.RKS_GEN_rotation
2010-09-23 07:50:52 +00:00
2011-02-04 09:27:25 +00:00
== Massive Keying Sets Recode == After a few days of wrong turns and learning the finer points of RNA-type-subclassing the hard way, this commit finally presents a refactored version of the Keying Sets system (now version 2) based on some requirements from Cessen. For a more thorough discussion of this commit, see http://sites.google.com/site/aligorith/keyingsets_2.pdf?attredirects=0&d=1 ------ The main highlight of this refactor is that relative Keying Sets have now been recoded so that Python callbacks are run to generate the Keying Set's list of paths everytime the Keying Set is used (to insert or delete keyframes), allowing complex heuristics to be used to determine whether a property gets keyframed based on the current context. These checks may include checking on selection status of related entities, or transform locks. Built-In KeyingSets have also been recoded, and moved from C and out into Python. These are now coded as Relative Keying Sets, and can to some extent serve as basis for adding new relative Keying Sets. However, these have mostly been coded in a slightly 'modular' way which may be confusing for those not so familiar with Python in general. A usable template will be added soon for more general usage. Keyframing settings (i.e. 'visual', 'needed') can now be specified on a per-path basis now, which is especially useful for Absolute Keying Sets, where control over this is often beneficial. Most of the places where Auto-Keyframing is performed have been tidied up for consistency. I'm sure quite a few issues still exist there, but these I'll clean up over the next few days.
2010-03-16 06:18:49 +00:00
# Scale
class BUILTIN_KSI_Scaling(KeyingSetInfo):
"""Insert a keyframe on each of the scale channels"""
bl_idname = ANIM_KS_SCALING_ID
2010-09-23 07:50:52 +00:00
bl_label = "Scaling"
# poll - use predefined callback for selected bones/objects
poll = keyingsets_utils.RKS_POLL_selected_items
2010-09-23 07:50:52 +00:00
# iterator - use callback for selected bones/objects
iterator = keyingsets_utils.RKS_ITER_selected_item
2010-09-23 07:50:52 +00:00
# generator - use callback for scaling
generate = keyingsets_utils.RKS_GEN_scaling
== Massive Keying Sets Recode == After a few days of wrong turns and learning the finer points of RNA-type-subclassing the hard way, this commit finally presents a refactored version of the Keying Sets system (now version 2) based on some requirements from Cessen. For a more thorough discussion of this commit, see http://sites.google.com/site/aligorith/keyingsets_2.pdf?attredirects=0&d=1 ------ The main highlight of this refactor is that relative Keying Sets have now been recoded so that Python callbacks are run to generate the Keying Set's list of paths everytime the Keying Set is used (to insert or delete keyframes), allowing complex heuristics to be used to determine whether a property gets keyframed based on the current context. These checks may include checking on selection status of related entities, or transform locks. Built-In KeyingSets have also been recoded, and moved from C and out into Python. These are now coded as Relative Keying Sets, and can to some extent serve as basis for adding new relative Keying Sets. However, these have mostly been coded in a slightly 'modular' way which may be confusing for those not so familiar with Python in general. A usable template will be added soon for more general usage. Keyframing settings (i.e. 'visual', 'needed') can now be specified on a per-path basis now, which is especially useful for Absolute Keying Sets, where control over this is often beneficial. Most of the places where Auto-Keyframing is performed have been tidied up for consistency. I'm sure quite a few issues still exist there, but these I'll clean up over the next few days.
2010-03-16 06:18:49 +00:00
# ------------
2010-09-23 07:50:52 +00:00
2011-02-04 09:27:25 +00:00
== Massive Keying Sets Recode == After a few days of wrong turns and learning the finer points of RNA-type-subclassing the hard way, this commit finally presents a refactored version of the Keying Sets system (now version 2) based on some requirements from Cessen. For a more thorough discussion of this commit, see http://sites.google.com/site/aligorith/keyingsets_2.pdf?attredirects=0&d=1 ------ The main highlight of this refactor is that relative Keying Sets have now been recoded so that Python callbacks are run to generate the Keying Set's list of paths everytime the Keying Set is used (to insert or delete keyframes), allowing complex heuristics to be used to determine whether a property gets keyframed based on the current context. These checks may include checking on selection status of related entities, or transform locks. Built-In KeyingSets have also been recoded, and moved from C and out into Python. These are now coded as Relative Keying Sets, and can to some extent serve as basis for adding new relative Keying Sets. However, these have mostly been coded in a slightly 'modular' way which may be confusing for those not so familiar with Python in general. A usable template will be added soon for more general usage. Keyframing settings (i.e. 'visual', 'needed') can now be specified on a per-path basis now, which is especially useful for Absolute Keying Sets, where control over this is often beneficial. Most of the places where Auto-Keyframing is performed have been tidied up for consistency. I'm sure quite a few issues still exist there, but these I'll clean up over the next few days.
2010-03-16 06:18:49 +00:00
# LocRot
class BUILTIN_KSI_LocRot(KeyingSetInfo):
"""Insert a keyframe on each of the location and rotation channels"""
2010-09-23 07:50:52 +00:00
bl_label = "LocRot"
# poll - use predefined callback for selected bones/objects
poll = keyingsets_utils.RKS_POLL_selected_items
2010-09-23 07:50:52 +00:00
# iterator - use callback for selected bones/objects
iterator = keyingsets_utils.RKS_ITER_selected_item
2010-09-23 07:50:52 +00:00
2011-02-04 09:27:25 +00:00
# generator
2010-09-23 07:50:52 +00:00
def generate(self, context, ks, data):
# location
keyingsets_utils.RKS_GEN_location(self, context, ks, data)
2010-09-23 07:50:52 +00:00
# rotation
keyingsets_utils.RKS_GEN_rotation(self, context, ks, data)
== Massive Keying Sets Recode == After a few days of wrong turns and learning the finer points of RNA-type-subclassing the hard way, this commit finally presents a refactored version of the Keying Sets system (now version 2) based on some requirements from Cessen. For a more thorough discussion of this commit, see http://sites.google.com/site/aligorith/keyingsets_2.pdf?attredirects=0&d=1 ------ The main highlight of this refactor is that relative Keying Sets have now been recoded so that Python callbacks are run to generate the Keying Set's list of paths everytime the Keying Set is used (to insert or delete keyframes), allowing complex heuristics to be used to determine whether a property gets keyframed based on the current context. These checks may include checking on selection status of related entities, or transform locks. Built-In KeyingSets have also been recoded, and moved from C and out into Python. These are now coded as Relative Keying Sets, and can to some extent serve as basis for adding new relative Keying Sets. However, these have mostly been coded in a slightly 'modular' way which may be confusing for those not so familiar with Python in general. A usable template will be added soon for more general usage. Keyframing settings (i.e. 'visual', 'needed') can now be specified on a per-path basis now, which is especially useful for Absolute Keying Sets, where control over this is often beneficial. Most of the places where Auto-Keyframing is performed have been tidied up for consistency. I'm sure quite a few issues still exist there, but these I'll clean up over the next few days.
2010-03-16 06:18:49 +00:00
2011-02-04 09:27:25 +00:00
== Massive Keying Sets Recode == After a few days of wrong turns and learning the finer points of RNA-type-subclassing the hard way, this commit finally presents a refactored version of the Keying Sets system (now version 2) based on some requirements from Cessen. For a more thorough discussion of this commit, see http://sites.google.com/site/aligorith/keyingsets_2.pdf?attredirects=0&d=1 ------ The main highlight of this refactor is that relative Keying Sets have now been recoded so that Python callbacks are run to generate the Keying Set's list of paths everytime the Keying Set is used (to insert or delete keyframes), allowing complex heuristics to be used to determine whether a property gets keyframed based on the current context. These checks may include checking on selection status of related entities, or transform locks. Built-In KeyingSets have also been recoded, and moved from C and out into Python. These are now coded as Relative Keying Sets, and can to some extent serve as basis for adding new relative Keying Sets. However, these have mostly been coded in a slightly 'modular' way which may be confusing for those not so familiar with Python in general. A usable template will be added soon for more general usage. Keyframing settings (i.e. 'visual', 'needed') can now be specified on a per-path basis now, which is especially useful for Absolute Keying Sets, where control over this is often beneficial. Most of the places where Auto-Keyframing is performed have been tidied up for consistency. I'm sure quite a few issues still exist there, but these I'll clean up over the next few days.
2010-03-16 06:18:49 +00:00
# LocScale
class BUILTIN_KSI_LocScale(KeyingSetInfo):
"""Insert a keyframe on each of the location and scale channels"""
2010-09-23 07:50:52 +00:00
bl_label = "LocScale"
# poll - use predefined callback for selected bones/objects
poll = keyingsets_utils.RKS_POLL_selected_items
2010-09-23 07:50:52 +00:00
# iterator - use callback for selected bones/objects
iterator = keyingsets_utils.RKS_ITER_selected_item
2010-09-23 07:50:52 +00:00
2011-02-04 09:27:25 +00:00
# generator
2010-09-23 07:50:52 +00:00
def generate(self, context, ks, data):
# location
keyingsets_utils.RKS_GEN_location(self, context, ks, data)
2010-09-23 07:50:52 +00:00
# scale
keyingsets_utils.RKS_GEN_scaling(self, context, ks, data)
== Massive Keying Sets Recode == After a few days of wrong turns and learning the finer points of RNA-type-subclassing the hard way, this commit finally presents a refactored version of the Keying Sets system (now version 2) based on some requirements from Cessen. For a more thorough discussion of this commit, see http://sites.google.com/site/aligorith/keyingsets_2.pdf?attredirects=0&d=1 ------ The main highlight of this refactor is that relative Keying Sets have now been recoded so that Python callbacks are run to generate the Keying Set's list of paths everytime the Keying Set is used (to insert or delete keyframes), allowing complex heuristics to be used to determine whether a property gets keyframed based on the current context. These checks may include checking on selection status of related entities, or transform locks. Built-In KeyingSets have also been recoded, and moved from C and out into Python. These are now coded as Relative Keying Sets, and can to some extent serve as basis for adding new relative Keying Sets. However, these have mostly been coded in a slightly 'modular' way which may be confusing for those not so familiar with Python in general. A usable template will be added soon for more general usage. Keyframing settings (i.e. 'visual', 'needed') can now be specified on a per-path basis now, which is especially useful for Absolute Keying Sets, where control over this is often beneficial. Most of the places where Auto-Keyframing is performed have been tidied up for consistency. I'm sure quite a few issues still exist there, but these I'll clean up over the next few days.
2010-03-16 06:18:49 +00:00
2011-02-04 09:27:25 +00:00
== Massive Keying Sets Recode == After a few days of wrong turns and learning the finer points of RNA-type-subclassing the hard way, this commit finally presents a refactored version of the Keying Sets system (now version 2) based on some requirements from Cessen. For a more thorough discussion of this commit, see http://sites.google.com/site/aligorith/keyingsets_2.pdf?attredirects=0&d=1 ------ The main highlight of this refactor is that relative Keying Sets have now been recoded so that Python callbacks are run to generate the Keying Set's list of paths everytime the Keying Set is used (to insert or delete keyframes), allowing complex heuristics to be used to determine whether a property gets keyframed based on the current context. These checks may include checking on selection status of related entities, or transform locks. Built-In KeyingSets have also been recoded, and moved from C and out into Python. These are now coded as Relative Keying Sets, and can to some extent serve as basis for adding new relative Keying Sets. However, these have mostly been coded in a slightly 'modular' way which may be confusing for those not so familiar with Python in general. A usable template will be added soon for more general usage. Keyframing settings (i.e. 'visual', 'needed') can now be specified on a per-path basis now, which is especially useful for Absolute Keying Sets, where control over this is often beneficial. Most of the places where Auto-Keyframing is performed have been tidied up for consistency. I'm sure quite a few issues still exist there, but these I'll clean up over the next few days.
2010-03-16 06:18:49 +00:00
# LocRotScale
class BUILTIN_KSI_LocRotScale(KeyingSetInfo):
"""
Insert a keyframe on each of the location, rotation, and scale channels
"""
bl_idname = ANIM_KS_LOC_ROT_SCALE_ID
2010-09-23 07:50:52 +00:00
bl_label = "LocRotScale"
# poll - use predefined callback for selected bones/objects
poll = keyingsets_utils.RKS_POLL_selected_items
2010-09-23 07:50:52 +00:00
# iterator - use callback for selected bones/objects
iterator = keyingsets_utils.RKS_ITER_selected_item
2010-09-23 07:50:52 +00:00
2011-02-04 09:27:25 +00:00
# generator
2010-09-23 07:50:52 +00:00
def generate(self, context, ks, data):
# location
keyingsets_utils.RKS_GEN_location(self, context, ks, data)
2010-09-23 07:50:52 +00:00
# rotation
keyingsets_utils.RKS_GEN_rotation(self, context, ks, data)
2010-09-23 07:50:52 +00:00
# scale
keyingsets_utils.RKS_GEN_scaling(self, context, ks, data)
== Massive Keying Sets Recode == After a few days of wrong turns and learning the finer points of RNA-type-subclassing the hard way, this commit finally presents a refactored version of the Keying Sets system (now version 2) based on some requirements from Cessen. For a more thorough discussion of this commit, see http://sites.google.com/site/aligorith/keyingsets_2.pdf?attredirects=0&d=1 ------ The main highlight of this refactor is that relative Keying Sets have now been recoded so that Python callbacks are run to generate the Keying Set's list of paths everytime the Keying Set is used (to insert or delete keyframes), allowing complex heuristics to be used to determine whether a property gets keyframed based on the current context. These checks may include checking on selection status of related entities, or transform locks. Built-In KeyingSets have also been recoded, and moved from C and out into Python. These are now coded as Relative Keying Sets, and can to some extent serve as basis for adding new relative Keying Sets. However, these have mostly been coded in a slightly 'modular' way which may be confusing for those not so familiar with Python in general. A usable template will be added soon for more general usage. Keyframing settings (i.e. 'visual', 'needed') can now be specified on a per-path basis now, which is especially useful for Absolute Keying Sets, where control over this is often beneficial. Most of the places where Auto-Keyframing is performed have been tidied up for consistency. I'm sure quite a few issues still exist there, but these I'll clean up over the next few days.
2010-03-16 06:18:49 +00:00
2011-02-04 09:27:25 +00:00
== Massive Keying Sets Recode == After a few days of wrong turns and learning the finer points of RNA-type-subclassing the hard way, this commit finally presents a refactored version of the Keying Sets system (now version 2) based on some requirements from Cessen. For a more thorough discussion of this commit, see http://sites.google.com/site/aligorith/keyingsets_2.pdf?attredirects=0&d=1 ------ The main highlight of this refactor is that relative Keying Sets have now been recoded so that Python callbacks are run to generate the Keying Set's list of paths everytime the Keying Set is used (to insert or delete keyframes), allowing complex heuristics to be used to determine whether a property gets keyframed based on the current context. These checks may include checking on selection status of related entities, or transform locks. Built-In KeyingSets have also been recoded, and moved from C and out into Python. These are now coded as Relative Keying Sets, and can to some extent serve as basis for adding new relative Keying Sets. However, these have mostly been coded in a slightly 'modular' way which may be confusing for those not so familiar with Python in general. A usable template will be added soon for more general usage. Keyframing settings (i.e. 'visual', 'needed') can now be specified on a per-path basis now, which is especially useful for Absolute Keying Sets, where control over this is often beneficial. Most of the places where Auto-Keyframing is performed have been tidied up for consistency. I'm sure quite a few issues still exist there, but these I'll clean up over the next few days.
2010-03-16 06:18:49 +00:00
# RotScale
class BUILTIN_KSI_RotScale(KeyingSetInfo):
"""Insert a keyframe on each of the rotation and scale channels"""
2010-09-23 07:50:52 +00:00
bl_label = "RotScale"
# poll - use predefined callback for selected bones/objects
poll = keyingsets_utils.RKS_POLL_selected_items
2010-09-23 07:50:52 +00:00
# iterator - use callback for selected bones/objects
iterator = keyingsets_utils.RKS_ITER_selected_item
2010-09-23 07:50:52 +00:00
2011-02-04 09:27:25 +00:00
# generator
2010-09-23 07:50:52 +00:00
def generate(self, context, ks, data):
# rotation
keyingsets_utils.RKS_GEN_rotation(self, context, ks, data)
2010-09-23 07:50:52 +00:00
# scaling
keyingsets_utils.RKS_GEN_scaling(self, context, ks, data)
2011-02-04 09:27:25 +00:00
== Massive Keying Sets Recode == After a few days of wrong turns and learning the finer points of RNA-type-subclassing the hard way, this commit finally presents a refactored version of the Keying Sets system (now version 2) based on some requirements from Cessen. For a more thorough discussion of this commit, see http://sites.google.com/site/aligorith/keyingsets_2.pdf?attredirects=0&d=1 ------ The main highlight of this refactor is that relative Keying Sets have now been recoded so that Python callbacks are run to generate the Keying Set's list of paths everytime the Keying Set is used (to insert or delete keyframes), allowing complex heuristics to be used to determine whether a property gets keyframed based on the current context. These checks may include checking on selection status of related entities, or transform locks. Built-In KeyingSets have also been recoded, and moved from C and out into Python. These are now coded as Relative Keying Sets, and can to some extent serve as basis for adding new relative Keying Sets. However, these have mostly been coded in a slightly 'modular' way which may be confusing for those not so familiar with Python in general. A usable template will be added soon for more general usage. Keyframing settings (i.e. 'visual', 'needed') can now be specified on a per-path basis now, which is especially useful for Absolute Keying Sets, where control over this is often beneficial. Most of the places where Auto-Keyframing is performed have been tidied up for consistency. I'm sure quite a few issues still exist there, but these I'll clean up over the next few days.
2010-03-16 06:18:49 +00:00
# ------------
2011-02-04 09:27:25 +00:00
== Massive Keying Sets Recode == After a few days of wrong turns and learning the finer points of RNA-type-subclassing the hard way, this commit finally presents a refactored version of the Keying Sets system (now version 2) based on some requirements from Cessen. For a more thorough discussion of this commit, see http://sites.google.com/site/aligorith/keyingsets_2.pdf?attredirects=0&d=1 ------ The main highlight of this refactor is that relative Keying Sets have now been recoded so that Python callbacks are run to generate the Keying Set's list of paths everytime the Keying Set is used (to insert or delete keyframes), allowing complex heuristics to be used to determine whether a property gets keyframed based on the current context. These checks may include checking on selection status of related entities, or transform locks. Built-In KeyingSets have also been recoded, and moved from C and out into Python. These are now coded as Relative Keying Sets, and can to some extent serve as basis for adding new relative Keying Sets. However, these have mostly been coded in a slightly 'modular' way which may be confusing for those not so familiar with Python in general. A usable template will be added soon for more general usage. Keyframing settings (i.e. 'visual', 'needed') can now be specified on a per-path basis now, which is especially useful for Absolute Keying Sets, where control over this is often beneficial. Most of the places where Auto-Keyframing is performed have been tidied up for consistency. I'm sure quite a few issues still exist there, but these I'll clean up over the next few days.
2010-03-16 06:18:49 +00:00
# Location
class BUILTIN_KSI_VisualLoc(KeyingSetInfo):
"""
Insert a keyframe on each of the location channels, taking into account
effects of constraints and relationships
"""
2010-09-23 07:50:52 +00:00
bl_label = "Visual Location"
bl_options = {'INSERTKEY_VISUAL'}
2010-09-23 07:50:52 +00:00
# poll - use predefined callback for selected bones/objects
poll = keyingsets_utils.RKS_POLL_selected_items
2010-09-23 07:50:52 +00:00
# iterator - use callback for selected bones/objects
iterator = keyingsets_utils.RKS_ITER_selected_item
2010-09-23 07:50:52 +00:00
2011-02-04 09:27:25 +00:00
# generator - use callback for location
generate = keyingsets_utils.RKS_GEN_location
2010-09-23 07:50:52 +00:00
2011-02-04 09:27:25 +00:00
== Massive Keying Sets Recode == After a few days of wrong turns and learning the finer points of RNA-type-subclassing the hard way, this commit finally presents a refactored version of the Keying Sets system (now version 2) based on some requirements from Cessen. For a more thorough discussion of this commit, see http://sites.google.com/site/aligorith/keyingsets_2.pdf?attredirects=0&d=1 ------ The main highlight of this refactor is that relative Keying Sets have now been recoded so that Python callbacks are run to generate the Keying Set's list of paths everytime the Keying Set is used (to insert or delete keyframes), allowing complex heuristics to be used to determine whether a property gets keyframed based on the current context. These checks may include checking on selection status of related entities, or transform locks. Built-In KeyingSets have also been recoded, and moved from C and out into Python. These are now coded as Relative Keying Sets, and can to some extent serve as basis for adding new relative Keying Sets. However, these have mostly been coded in a slightly 'modular' way which may be confusing for those not so familiar with Python in general. A usable template will be added soon for more general usage. Keyframing settings (i.e. 'visual', 'needed') can now be specified on a per-path basis now, which is especially useful for Absolute Keying Sets, where control over this is often beneficial. Most of the places where Auto-Keyframing is performed have been tidied up for consistency. I'm sure quite a few issues still exist there, but these I'll clean up over the next few days.
2010-03-16 06:18:49 +00:00
# Rotation
class BUILTIN_KSI_VisualRot(KeyingSetInfo):
"""
Insert a keyframe on each of the rotation channels, taking into account
effects of constraints and relationships
"""
2010-09-23 07:50:52 +00:00
bl_label = "Visual Rotation"
bl_options = {'INSERTKEY_VISUAL'}
2010-09-23 07:50:52 +00:00
# poll - use predefined callback for selected bones/objects
poll = keyingsets_utils.RKS_POLL_selected_items
2010-09-23 07:50:52 +00:00
# iterator - use callback for selected bones/objects
iterator = keyingsets_utils.RKS_ITER_selected_item
2010-09-23 07:50:52 +00:00
2011-02-04 09:27:25 +00:00
# generator - use callback for rotation
generate = keyingsets_utils.RKS_GEN_rotation
== Massive Keying Sets Recode == After a few days of wrong turns and learning the finer points of RNA-type-subclassing the hard way, this commit finally presents a refactored version of the Keying Sets system (now version 2) based on some requirements from Cessen. For a more thorough discussion of this commit, see http://sites.google.com/site/aligorith/keyingsets_2.pdf?attredirects=0&d=1 ------ The main highlight of this refactor is that relative Keying Sets have now been recoded so that Python callbacks are run to generate the Keying Set's list of paths everytime the Keying Set is used (to insert or delete keyframes), allowing complex heuristics to be used to determine whether a property gets keyframed based on the current context. These checks may include checking on selection status of related entities, or transform locks. Built-In KeyingSets have also been recoded, and moved from C and out into Python. These are now coded as Relative Keying Sets, and can to some extent serve as basis for adding new relative Keying Sets. However, these have mostly been coded in a slightly 'modular' way which may be confusing for those not so familiar with Python in general. A usable template will be added soon for more general usage. Keyframing settings (i.e. 'visual', 'needed') can now be specified on a per-path basis now, which is especially useful for Absolute Keying Sets, where control over this is often beneficial. Most of the places where Auto-Keyframing is performed have been tidied up for consistency. I'm sure quite a few issues still exist there, but these I'll clean up over the next few days.
2010-03-16 06:18:49 +00:00
2011-02-04 09:27:25 +00:00
== Massive Keying Sets Recode == After a few days of wrong turns and learning the finer points of RNA-type-subclassing the hard way, this commit finally presents a refactored version of the Keying Sets system (now version 2) based on some requirements from Cessen. For a more thorough discussion of this commit, see http://sites.google.com/site/aligorith/keyingsets_2.pdf?attredirects=0&d=1 ------ The main highlight of this refactor is that relative Keying Sets have now been recoded so that Python callbacks are run to generate the Keying Set's list of paths everytime the Keying Set is used (to insert or delete keyframes), allowing complex heuristics to be used to determine whether a property gets keyframed based on the current context. These checks may include checking on selection status of related entities, or transform locks. Built-In KeyingSets have also been recoded, and moved from C and out into Python. These are now coded as Relative Keying Sets, and can to some extent serve as basis for adding new relative Keying Sets. However, these have mostly been coded in a slightly 'modular' way which may be confusing for those not so familiar with Python in general. A usable template will be added soon for more general usage. Keyframing settings (i.e. 'visual', 'needed') can now be specified on a per-path basis now, which is especially useful for Absolute Keying Sets, where control over this is often beneficial. Most of the places where Auto-Keyframing is performed have been tidied up for consistency. I'm sure quite a few issues still exist there, but these I'll clean up over the next few days.
2010-03-16 06:18:49 +00:00
# VisualLocRot
class BUILTIN_KSI_VisualLocRot(KeyingSetInfo):
"""
Insert a keyframe on each of the location and rotation channels,
taking into account effects of constraints and relationships
"""
2010-09-23 07:50:52 +00:00
bl_label = "Visual LocRot"
bl_options = {'INSERTKEY_VISUAL'}
2010-09-23 07:50:52 +00:00
# poll - use predefined callback for selected bones/objects
poll = keyingsets_utils.RKS_POLL_selected_items
2010-09-23 07:50:52 +00:00
# iterator - use callback for selected bones/objects
iterator = keyingsets_utils.RKS_ITER_selected_item
2010-09-23 07:50:52 +00:00
2011-02-04 09:27:25 +00:00
# generator
2010-09-23 07:50:52 +00:00
def generate(self, context, ks, data):
# location
keyingsets_utils.RKS_GEN_location(self, context, ks, data)
2010-09-23 07:50:52 +00:00
# rotation
keyingsets_utils.RKS_GEN_rotation(self, context, ks, data)
== Massive Keying Sets Recode == After a few days of wrong turns and learning the finer points of RNA-type-subclassing the hard way, this commit finally presents a refactored version of the Keying Sets system (now version 2) based on some requirements from Cessen. For a more thorough discussion of this commit, see http://sites.google.com/site/aligorith/keyingsets_2.pdf?attredirects=0&d=1 ------ The main highlight of this refactor is that relative Keying Sets have now been recoded so that Python callbacks are run to generate the Keying Set's list of paths everytime the Keying Set is used (to insert or delete keyframes), allowing complex heuristics to be used to determine whether a property gets keyframed based on the current context. These checks may include checking on selection status of related entities, or transform locks. Built-In KeyingSets have also been recoded, and moved from C and out into Python. These are now coded as Relative Keying Sets, and can to some extent serve as basis for adding new relative Keying Sets. However, these have mostly been coded in a slightly 'modular' way which may be confusing for those not so familiar with Python in general. A usable template will be added soon for more general usage. Keyframing settings (i.e. 'visual', 'needed') can now be specified on a per-path basis now, which is especially useful for Absolute Keying Sets, where control over this is often beneficial. Most of the places where Auto-Keyframing is performed have been tidied up for consistency. I'm sure quite a few issues still exist there, but these I'll clean up over the next few days.
2010-03-16 06:18:49 +00:00
# ------------
2011-02-04 09:27:25 +00:00
== Massive Keying Sets Recode == After a few days of wrong turns and learning the finer points of RNA-type-subclassing the hard way, this commit finally presents a refactored version of the Keying Sets system (now version 2) based on some requirements from Cessen. For a more thorough discussion of this commit, see http://sites.google.com/site/aligorith/keyingsets_2.pdf?attredirects=0&d=1 ------ The main highlight of this refactor is that relative Keying Sets have now been recoded so that Python callbacks are run to generate the Keying Set's list of paths everytime the Keying Set is used (to insert or delete keyframes), allowing complex heuristics to be used to determine whether a property gets keyframed based on the current context. These checks may include checking on selection status of related entities, or transform locks. Built-In KeyingSets have also been recoded, and moved from C and out into Python. These are now coded as Relative Keying Sets, and can to some extent serve as basis for adding new relative Keying Sets. However, these have mostly been coded in a slightly 'modular' way which may be confusing for those not so familiar with Python in general. A usable template will be added soon for more general usage. Keyframing settings (i.e. 'visual', 'needed') can now be specified on a per-path basis now, which is especially useful for Absolute Keying Sets, where control over this is often beneficial. Most of the places where Auto-Keyframing is performed have been tidied up for consistency. I'm sure quite a few issues still exist there, but these I'll clean up over the next few days.
2010-03-16 06:18:49 +00:00
# Available
class BUILTIN_KSI_Available(KeyingSetInfo):
"""Insert a keyframe on each of the already existing F-Curves"""
bl_idname = ANIM_KS_AVAILABLE_ID
2010-09-23 07:50:52 +00:00
bl_label = "Available"
# poll - selected objects or selected object with animation data
def poll(ksi, context):
ob = context.active_object
if ob:
# TODO: this fails if one animation-less object is active, but many others are selected
return ob.animation_data and ob.animation_data.action
else:
return bool(context.selected_objects)
2010-09-23 07:50:52 +00:00
# iterator - use callback for selected bones/objects
iterator = keyingsets_utils.RKS_ITER_selected_item
2010-09-23 07:50:52 +00:00
2011-02-04 09:27:25 +00:00
# generator - use callback for doing this
generate = keyingsets_utils.RKS_GEN_available
== Massive Keying Sets Recode == After a few days of wrong turns and learning the finer points of RNA-type-subclassing the hard way, this commit finally presents a refactored version of the Keying Sets system (now version 2) based on some requirements from Cessen. For a more thorough discussion of this commit, see http://sites.google.com/site/aligorith/keyingsets_2.pdf?attredirects=0&d=1 ------ The main highlight of this refactor is that relative Keying Sets have now been recoded so that Python callbacks are run to generate the Keying Set's list of paths everytime the Keying Set is used (to insert or delete keyframes), allowing complex heuristics to be used to determine whether a property gets keyframed based on the current context. These checks may include checking on selection status of related entities, or transform locks. Built-In KeyingSets have also been recoded, and moved from C and out into Python. These are now coded as Relative Keying Sets, and can to some extent serve as basis for adding new relative Keying Sets. However, these have mostly been coded in a slightly 'modular' way which may be confusing for those not so familiar with Python in general. A usable template will be added soon for more general usage. Keyframing settings (i.e. 'visual', 'needed') can now be specified on a per-path basis now, which is especially useful for Absolute Keying Sets, where control over this is often beneficial. Most of the places where Auto-Keyframing is performed have been tidied up for consistency. I'm sure quite a few issues still exist there, but these I'll clean up over the next few days.
2010-03-16 06:18:49 +00:00
2011-02-04 09:27:25 +00:00
###############################
== Massive Keying Sets Recode == After a few days of wrong turns and learning the finer points of RNA-type-subclassing the hard way, this commit finally presents a refactored version of the Keying Sets system (now version 2) based on some requirements from Cessen. For a more thorough discussion of this commit, see http://sites.google.com/site/aligorith/keyingsets_2.pdf?attredirects=0&d=1 ------ The main highlight of this refactor is that relative Keying Sets have now been recoded so that Python callbacks are run to generate the Keying Set's list of paths everytime the Keying Set is used (to insert or delete keyframes), allowing complex heuristics to be used to determine whether a property gets keyframed based on the current context. These checks may include checking on selection status of related entities, or transform locks. Built-In KeyingSets have also been recoded, and moved from C and out into Python. These are now coded as Relative Keying Sets, and can to some extent serve as basis for adding new relative Keying Sets. However, these have mostly been coded in a slightly 'modular' way which may be confusing for those not so familiar with Python in general. A usable template will be added soon for more general usage. Keyframing settings (i.e. 'visual', 'needed') can now be specified on a per-path basis now, which is especially useful for Absolute Keying Sets, where control over this is often beneficial. Most of the places where Auto-Keyframing is performed have been tidied up for consistency. I'm sure quite a few issues still exist there, but these I'll clean up over the next few days.
2010-03-16 06:18:49 +00:00
# All properties that are likely to get animated in a character rig
class BUILTIN_KSI_WholeCharacter(KeyingSetInfo):
"""
Insert a keyframe for all properties that are likely to get animated in a
character rig (useful when blocking out a shot)
"""
bl_idname = ANIM_KS_WHOLE_CHARACTER_ID
bl_label = "Whole Character"
2011-02-04 09:27:25 +00:00
# these prefixes should be avoided, as they are not really bones
# that animators should be touching (or need to touch)
badBonePrefixes = (
2011-02-04 09:27:25 +00:00
'DEF',
'GEO',
'MCH',
'ORG',
'COR',
'VIS',
# ... more can be added here as you need in your own rigs ...
)
2011-02-04 09:27:25 +00:00
# poll - pose-mode on active object only
def poll(ksi, context):
return ((context.active_object) and (context.active_object.pose) and
(context.active_object.mode == 'POSE'))
# iterator - all bones regardless of selection
def iterator(ksi, context, ks):
for bone in context.active_object.pose.bones:
if not bone.name.startswith(BUILTIN_KSI_WholeCharacter.badBonePrefixes):
ksi.generate(context, ks, bone)
# generator - all unlocked bone transforms + custom properties
def generate(ksi, context, ks, bone):
# loc, rot, scale - only include unlocked ones
ksi.doLoc(ks, bone)
2011-02-04 09:27:25 +00:00
if bone.rotation_mode in {'QUATERNION', 'AXIS_ANGLE'}:
ksi.doRot4d(ks, bone)
else:
ksi.doRot3d(ks, bone)
ksi.doScale(ks, bone)
2011-02-04 09:27:25 +00:00
# custom props?
ksi.doCustomProps(ks, bone)
2011-02-04 09:27:25 +00:00
# ----------------
2011-02-04 09:27:25 +00:00
# helper to add some bone's property to the Keying Set
2011-02-04 09:27:25 +00:00
def addProp(ksi, ks, bone, prop, index=-1, use_groups=True):
# add the property name to the base path
id_path = bone.path_from_id()
id_block = bone.id_data
2011-02-04 09:27:25 +00:00
if prop.startswith('['):
# custom properties
path = id_path + prop
2011-02-04 09:27:25 +00:00
else:
# standard transforms/properties
path = keyingsets_utils.path_add_property(id_path, prop)
2011-02-04 09:27:25 +00:00
# add Keying Set entry for this...
if use_groups:
ks.paths.add(id_block, path, index, group_method='NAMED', group_name=bone.name)
else:
ks.paths.add(id_block, path, index)
2011-02-04 09:27:25 +00:00
# ----------------
2011-02-04 09:27:25 +00:00
# location properties
def doLoc(ksi, ks, bone):
if bone.lock_location == (False, False, False):
ksi.addProp(ks, bone, "location")
else:
for i in range(3):
if not bone.lock_location[i]:
ksi.addProp(ks, bone, "location", i)
2011-02-04 09:27:25 +00:00
# rotation properties
def doRot4d(ksi, ks, bone):
# rotation mode affects the property used
if bone.rotation_mode == 'QUATERNION':
prop = "rotation_quaternion"
elif bone.rotation_mode == 'AXIS_ANGLE':
prop = "rotation_axis_angle"
2011-02-04 09:27:25 +00:00
# add rotation properties if they will
if bone.lock_rotations_4d:
# can check individually
if (bone.lock_rotation == (False, False, False)) and (bone.lock_rotation_w == False):
ksi.addProp(ks, bone, prop)
else:
if bone.lock_rotation_w == False:
2011-02-04 09:27:25 +00:00
ksi.addProp(ks, bone, prop, 0) # w = 0
for i in range(3):
if not bone.lock_rotation[i]:
ksi.addProp(ks, bone, prop, i + 1) # i + 1, since here x/y/z = 1,2,3, and w=0
elif True not in bone.lock_rotation:
2011-02-04 09:27:25 +00:00
# if axis-angle rotations get locked as eulers, then it's too messy to allow anything
# other than all open unless we keyframe the whole lot
ksi.addProp(ks, bone, prop)
2011-02-04 09:27:25 +00:00
def doRot3d(ksi, ks, bone):
if bone.lock_rotation == (False, False, False):
ksi.addProp(ks, bone, "rotation_euler")
else:
for i in range(3):
if not bone.lock_rotation[i]:
ksi.addProp(ks, bone, "rotation_euler", i)
2011-02-04 09:27:25 +00:00
# scale properties
def doScale(ksi, ks, bone):
2011-02-04 09:27:25 +00:00
if bone.lock_scale == (0, 0, 0):
ksi.addProp(ks, bone, "scale")
else:
for i in range(3):
if not bone.lock_scale[i]:
ksi.addProp(ks, bone, "scale", i)
2011-02-04 09:27:25 +00:00
# ----------------
2011-02-04 09:27:25 +00:00
# custom properties
def doCustomProps(ksi, ks, bone):
prop_type_compat = {bpy.types.BoolProperty,
bpy.types.IntProperty,
bpy.types.FloatProperty}
# go over all custom properties for bone
for prop in bone.keys():
# ignore special "_RNA_UI" used for UI editing
if prop == "_RNA_UI":
continue
2011-02-04 09:27:25 +00:00
# for now, just add all of 'em
prop_rna = type(bone).bl_rna.properties.get(prop, None)
if prop_rna is None:
prop_path = '["%s"]' % prop
if bone.path_resolve(prop_path, False).rna_type in prop_type_compat:
ksi.addProp(ks, bone, prop_path)
elif prop_rna.is_animatable:
ksi.addProp(ks, bone, prop)
###############################
# Delta Location
class BUILTIN_KSI_DeltaLocation(KeyingSetInfo):
"""Insert keyframes for additional location offset"""
bl_label = "Delta Location"
# poll - selected objects only (and only if active object in object mode)
poll = keyingsets_utils.RKS_POLL_selected_objects
# iterator - selected objects only
iterator = keyingsets_utils.RKS_ITER_selected_objects
# generator - delta location channels only
def generate(ksi, context, ks, data):
# get id-block and path info
id_block, base_path, grouping = keyingsets_utils.get_transform_generators_base_info(data)
# add the property name to the base path
path = keyingsets_utils.path_add_property(base_path, "delta_location")
# add Keying Set entry for this...
if grouping:
ks.paths.add(id_block, path, group_method='NAMED', group_name=grouping)
else:
ks.paths.add(id_block, path)
# Delta Rotation
class BUILTIN_KSI_DeltaRotation(KeyingSetInfo):
"""Insert keyframes for additional rotation offset"""
bl_label = "Delta Rotation"
# poll - selected objects only (and only if active object in object mode)
poll = keyingsets_utils.RKS_POLL_selected_objects
# iterator - selected objects only
iterator = keyingsets_utils.RKS_ITER_selected_objects
# generator - delta location channels only
def generate(ksi, context, ks, data):
# get id-block and path info
id_block, base_path, grouping = keyingsets_utils.get_transform_generators_base_info(data)
# add the property name to the base path
# rotation mode affects the property used
if data.rotation_mode == 'QUATERNION':
path = keyingsets_utils.path_add_property(base_path, "delta_rotation_quaternion")
elif data.rotation_mode == 'AXIS_ANGLE':
# XXX: for now, this is not available yet
#path = path_add_property(base_path, "delta_rotation_axis_angle")
return
else:
path = keyingsets_utils.path_add_property(base_path, "delta_rotation_euler")
# add Keying Set entry for this...
if grouping:
ks.paths.add(id_block, path, group_method='NAMED', group_name=grouping)
else:
ks.paths.add(id_block, path)
# Delta Scale
class BUILTIN_KSI_DeltaScale(KeyingSetInfo):
"""Insert keyframes for additional scaling factor"""
bl_label = "Delta Scale"
# poll - selected objects only (and only if active object in object mode)
poll = keyingsets_utils.RKS_POLL_selected_objects
# iterator - selected objects only
iterator = keyingsets_utils.RKS_ITER_selected_objects
# generator - delta location channels only
def generate(ksi, context, ks, data):
# get id-block and path info
id_block, base_path, grouping = keyingsets_utils.get_transform_generators_base_info(data)
# add the property name to the base path
path = keyingsets_utils.path_add_property(base_path, "delta_scale")
# add Keying Set entry for this...
if grouping:
ks.paths.add(id_block, path, group_method='NAMED', group_name=grouping)
else:
ks.paths.add(id_block, path)
###############################
== Massive Keying Sets Recode == After a few days of wrong turns and learning the finer points of RNA-type-subclassing the hard way, this commit finally presents a refactored version of the Keying Sets system (now version 2) based on some requirements from Cessen. For a more thorough discussion of this commit, see http://sites.google.com/site/aligorith/keyingsets_2.pdf?attredirects=0&d=1 ------ The main highlight of this refactor is that relative Keying Sets have now been recoded so that Python callbacks are run to generate the Keying Set's list of paths everytime the Keying Set is used (to insert or delete keyframes), allowing complex heuristics to be used to determine whether a property gets keyframed based on the current context. These checks may include checking on selection status of related entities, or transform locks. Built-In KeyingSets have also been recoded, and moved from C and out into Python. These are now coded as Relative Keying Sets, and can to some extent serve as basis for adding new relative Keying Sets. However, these have mostly been coded in a slightly 'modular' way which may be confusing for those not so familiar with Python in general. A usable template will be added soon for more general usage. Keyframing settings (i.e. 'visual', 'needed') can now be specified on a per-path basis now, which is especially useful for Absolute Keying Sets, where control over this is often beneficial. Most of the places where Auto-Keyframing is performed have been tidied up for consistency. I'm sure quite a few issues still exist there, but these I'll clean up over the next few days.
2010-03-16 06:18:49 +00:00
def register():
bpy.utils.register_module(__name__)
== Massive Keying Sets Recode == After a few days of wrong turns and learning the finer points of RNA-type-subclassing the hard way, this commit finally presents a refactored version of the Keying Sets system (now version 2) based on some requirements from Cessen. For a more thorough discussion of this commit, see http://sites.google.com/site/aligorith/keyingsets_2.pdf?attredirects=0&d=1 ------ The main highlight of this refactor is that relative Keying Sets have now been recoded so that Python callbacks are run to generate the Keying Set's list of paths everytime the Keying Set is used (to insert or delete keyframes), allowing complex heuristics to be used to determine whether a property gets keyframed based on the current context. These checks may include checking on selection status of related entities, or transform locks. Built-In KeyingSets have also been recoded, and moved from C and out into Python. These are now coded as Relative Keying Sets, and can to some extent serve as basis for adding new relative Keying Sets. However, these have mostly been coded in a slightly 'modular' way which may be confusing for those not so familiar with Python in general. A usable template will be added soon for more general usage. Keyframing settings (i.e. 'visual', 'needed') can now be specified on a per-path basis now, which is especially useful for Absolute Keying Sets, where control over this is often beneficial. Most of the places where Auto-Keyframing is performed have been tidied up for consistency. I'm sure quite a few issues still exist there, but these I'll clean up over the next few days.
2010-03-16 06:18:49 +00:00
def unregister():
bpy.utils.unregister_module(__name__)
== Massive Keying Sets Recode == After a few days of wrong turns and learning the finer points of RNA-type-subclassing the hard way, this commit finally presents a refactored version of the Keying Sets system (now version 2) based on some requirements from Cessen. For a more thorough discussion of this commit, see http://sites.google.com/site/aligorith/keyingsets_2.pdf?attredirects=0&d=1 ------ The main highlight of this refactor is that relative Keying Sets have now been recoded so that Python callbacks are run to generate the Keying Set's list of paths everytime the Keying Set is used (to insert or delete keyframes), allowing complex heuristics to be used to determine whether a property gets keyframed based on the current context. These checks may include checking on selection status of related entities, or transform locks. Built-In KeyingSets have also been recoded, and moved from C and out into Python. These are now coded as Relative Keying Sets, and can to some extent serve as basis for adding new relative Keying Sets. However, these have mostly been coded in a slightly 'modular' way which may be confusing for those not so familiar with Python in general. A usable template will be added soon for more general usage. Keyframing settings (i.e. 'visual', 'needed') can now be specified on a per-path basis now, which is especially useful for Absolute Keying Sets, where control over this is often beneficial. Most of the places where Auto-Keyframing is performed have been tidied up for consistency. I'm sure quite a few issues still exist there, but these I'll clean up over the next few days.
2010-03-16 06:18:49 +00:00
if __name__ == "__main__":
register()