copy system with rigidbody constraint will link new constraints to new objects (instead of old)
fps from blender will be used when baking (left shift/ctrl/alt + P)
- GEdon't crash when attempting to add constraint on game objects without physics controller
- GEimproved some physics -> graphics synchronization issues
- small experiment with game engine timing to smooth framerate/reduce tearing
Although we will delay the main Rigid Body user interface after 2.43 release early 2007, I need some constraint data/UI to make progress with COLLADA Physics.
Added RigidBody constraint UI
LR_ALTKEY+LR_CTRLKEY+LR_SHIFTKEY+ P will bake rigidbody
Contribution by RCRuiz, Ramon Carlos.
All data layers, including MVert/MEdge/MFace, are now managed as custom
data layers. The pointers like Mesh.mvert, Mesh.dvert or Mesh.mcol are
still used of course, but allocating, copying or freeing these arrays
should be done through the CustomData API.
Work in progress documentation on this is here:
http://mediawiki.blender.org/index.php/BlenderDev/BlenderArchitecture/CustomData
Replaced TFace by MTFace:
This is the same struct, except that it does not contain color, that now
always stays separated in MCol. This was not a good design decision to
begin with, and it is needed for adding multiple color layers later. Note
that this does mean older Blender versions will not be able to read UV
coordinates from the next release, due to an SDNA limitation.
Removed DispListMesh:
This now fully replaced by DerivedMesh. To provide access to arrays of
vertices, edges and faces, like DispListMesh does. The semantics of the
DerivedMesh.getVertArray() and similar functions were changed to return
a pointer to an array if one exists, or otherwise allocate a temporary
one. On releasing the DerivedMesh, this temporary array will be removed
automatically.
Removed ssDM and meshDM DerivedMesh backends:
The ssDM backend was for DispListMesh, so that became obsolete automatically.
The meshDM backend was replaced by the custom data backend, that now figures
out which layers need to be modified, and only duplicates those.
This changes code in many places, and overall removes 2514 lines of code.
So, there's a good chance this might break some stuff, although I've been
testing it for a few days now. The good news is, adding multiple color and
uv layers should now become easy.
Cleared the python dictionary at the end of the game engine, should fix some issues,
also reverted the python controller changes, related to this
This should fix the following bugs:
[ #3789 ]
[ #3815 ]
possiblyy fixes:
[ #3834 ]
+ 'scons blenderplayer' builds blender AND blenderplayer now (tested on Linux
only, but was only linking issue, so should work on other platforms too).
NOTE: I noticed some compileflags for GE specific libs that were left out -
I re-enabled them in the SConscripts, but I'm going to do a test build my-
self now, so if there are problems with them on win32, I probably already
know about them :)
* This commit is all of the rewrite work done on the SCons system. For
documentation see doc/blender-scons.txt and doc/blender-scons-dev.txt.
Also http://mediawiki.blender.org/index.php/BlenderDev/SconsRefactoring
contains valuable information, along with what still needs to be done.
- linux, os x and windows compile now.
- files are compiled to BF_INSTALLDIR (see config/(platform)-config.py)
- NOTE: Jean-Luc P will commit sometime during the weekend proper
appit() for OS X. For now, copy the resulting binary to an
existing .app bundle.
- features:
- cleaner structure for better maintenance
- cleaner output during compile
- better handling of build options
- general overall speed increase
- see the wiki for more info
Cygwin, FreeBSD and Solaris systems still need work. For these systems:
1) copy a config/(platform)-config.py to ie. config/cygwin-config.py
2) set the proper defaults for your platform
3) mail me at jesterking at letwory dot net with you configuration. if
you need any modifications to the system, do send a patch, too.
I'll be giving first-aid today and tomorrow, after that it'll be all
regular development work :)
/Nathan
(with make, need to confirm with scons)
after cleaning the changes are in fact minimal, but the situation
is still quite a bit hackish.
Game engine coders, there is also quite a number of warnings that
need to be fixed.
current situation is that everything seems to work, but GLSL shaders
spew a lot of errors on console and blender may crash on exit when
a GLSL shader was used. ARB stuff works fine.
Armatures are back
Split screen
Double sided lightning
Ambient lighting
Alpha test
Material IPO support (one per object atm)
Blender materials
GLSL shaders - Python access
Up to three texture samplers from the material panel ( 2D & Cube map )
Python access to a second set of uv coordinates
See http://www.elysiun.com/forum/viewtopic.php?t=58057
including implementation. hope it works, and doesn't break to much.
it bakes physics objects transform into ipo, every frame of the running gameengine.
When you disable and run the game again, it clears the ipo's again. just for physics objects at the moment.
(perhaps some better UI in the future?)
using bandoler's patch as a basis (thanks!).
A couple of notes:
- This is for windows only, I did not have a chance to try linux yet.
- SConscript for PHY_Bullet may need tweaking (plus support
for other platforms), but at least it's in there :)
Any problems, shout :)
Keyboard sensors can now hook escape key. Ctrl-Break can be used from within blender if you've forgotten an end game actuator.
Fixed a stupid bug preventing some actuators working (like TrackTo).
Depth sorting for Transparent polygons. Use ZTransp in Material buttons to enable.
This will cause an object's polygons to be sorted (back to front for alpha polygons, front to back for solid polygons.)
[SCons] Build with Solid as default when enabling the gameengine in the build process
[SCons] Build solid and qhull from the extern directory and link statically against them
That was about it.
There are a few things that needs double checking:
* Makefiles
* Projectfiles
* All the other systems than Linux and Windows on which the build (with scons) has been successfully tested.
(MVert,MFace,etc) off into DNA_meshdata_types.h, to isolate areas
of source that actually edit mesh *data* vs. areas that just edit
mesh object information.
* Blender static now links. By default this option is disabled on all
platforms. Simply set the option in config.opts to 'true'.
* Added the following flags to config.opts:
- HOST_CC. This is the C compiler for the host platform. This value is the
same as TARGET_CC when not cross compiling.
- HOST_CXX. This is the C++ compiler for the host platform. This value is
the same as TARGET_CXX when not cross compiling.
- TARGET_CC. This is the C compiler for the target platform.
- TARGET_CXX. This is the C++ compiler for the target platform.
- TARGET_AR. This is the linker command for linking libraries.
- PATH This is the standard search path
All SConscript files have been updated to reflect these changes. Now it's
possible to change only the root SConstruct file, and all compiler specific
variables are passed automatically to all SConscript files. Of course, this
does not apply to makesdna because there the host and target platform is
different from all other libraries.
To pass a variable that applies to all platforms, all we now have to do is
set the correct value in library_env
Note: as usual, to get the latest options in the config.opts file, first
remove your version.
* Almost all library settings are now available in the config.opts user option
file.
* All platform variables had to be updated to make this possible. Things are
much clearer now, but I only was able to test the changes on Linux. I've
tried to update all other platform variables, but things are most likely to
be broken. Please contact me how to resolve the issues.
Note: Before running scons, remove your existing config.opts file to get all
new options.
* libraries are now generated in [BUILD_DIR]/lib
* passed the user_options to all libraries now.
This means I could remove a couple of Export/Import lines.
* Changed the order in source/blender/src/SConscript and
source/gameengine/SConscript.
All libraries are now sorted alphabetically. This has no impact on the build
process.
* Windows .exe file now includes the blender icon.
* Builds with game engine on Windows only.
I tried building the game engine on Linux, but I get weird errors when
building with ode. There's a dirty #include path in
Physics/BlOde/OdePhysicsEnvironment.cpp (../ode/src/joint.h). gcc doesn't
like this somehow.
* Other platforms need to add a couple of flags to the SConstruct:
use_sumo, use_ode, solid_include and ode_include
Materials are exported the best we can do by now. It will look almost as in
blender except for the missing procedural textures and some minor issues.
You have to tweak normal modulation amount to get the desired result cause
is not the same in yafray.
We added a panel in render space to adjust some yafray settings (GI and so)
Also we export transparency and reflection using new raytracing settings,
but that will be changed and improved soon.
Remember that you have to set YFexport path in user defaults and yafray must
be on path (version 0.0.6)
We added the "yafray" button to activate all this stuff in the render window.
Panel and settings are only shown when checked.
So now when activated the code calls yafray export instead of the internal
renderer and finally the resulting image is loaded back into render window's
buffer. So animation is also possible and results can be saved using blender
usual scheme.
Florian Eggenburger).
Full instructions are in doc/README.windows-gcc.
Main differences from Florian's patch:
- the 'lib' dir should now be the same level as the 'blender' dir (rather
than being a subdir of 'blender'). This is consistent with the other
platforms that bf-blender supports (tuhopuu will also adopt this convention
hopefully soon).
- the script 'free_windows-env.mk' is no longer needed ... see the
docs about how this is overcome (again, tuhopuu will hopefully
also follow this route soon).
- the dlltool dir has it's own Makefile that builds all of the
needed stub libraries from the dll's in cvs.