This situation corresponds to a group containing only a portion
of a parent hierarchy (the Apricot team needed that to avoid
logic duplication). The BGE will instantiate only the
children that are in the group so that it follows the 3D view
more closely.
As a result, the logic links to the objects in the portion of the
hierarchy that was not replicated will point to inactive objects
(if the groups are stored in inactive layers as they should be).
To keep the logic system consistent, these links are automatically
removed.
This last part of the patch is a general fix that could go in
2.47 but as this situation does not normally occurs in pre-2.47
games, it is not needed.
New Add mode for Ipo actuator
=============================
A new Add button, mutually exclusive with Force button, is available in
the Ipo actuator. When selected, it activates the Add mode that consists
in adding the Ipo curve to the current object situation in world
coordinates, or parent coordinates if the object has a parent. Scale Ipo
curves are multiplied instead of added to the object current scale.
If the local flag is selected, the Ipo curve is added (multiplied) in
the object's local coordinates.
Delta Ipo curves are handled identically to normal Ipo curve and there
is no need to work with Delta Ipo curves provided that you make sure
that the Ipo curve starts from origin. Origin means location 0 for
Location Ipo curve, rotation 0 for Rotation Ipo curve and scale 1 for
Scale Ipo curve.
The "current object situation" means the object's location, rotation
and scale at the start of the Ipo curve. For Loop Stop and Loop End Ipo
actuators, this means at the start of each loop. This initial state is
used as a base during the execution of the Ipo Curve but when the Ipo
curve is restarted (later or immediately in case of Loop mode), the
object current situation at that time is used as the new base.
For reference, here is the exact operation of the Add mode for each
type of Ipo curve (oLoc, oRot, oScale, oMat: object's loc/rot/scale
and orientation matrix at the start of the curve; iLoc, iRot, iScale,
iMat: Ipo curve loc/rot/scale and orientation matrix resulting from
the rotation).
Location
Local=false: newLoc = oLoc+iLoc
Local=true : newLoc = oLoc+oScale*(oMat*iLoc)
Rotation
Local=false: newMat = iMat*oMat
Local=true : newMat = oMat*iMat
Scale
Local=false: newScale = oScale*iScale
Local=true : newScale = oScale*iScale
Add+Local mode is very useful to have dynamic object executing complex
movement relative to their current location/orientation. Of cource,
dynamics should be disabled during the execution of the curve.
Several corrections in state system
===================================
- Object initial state is taken into account when adding object
dynamically
- Fix bug with link count when adding object dynamically
- Fix false on-off detection for Actuator sensor when actuator is
trigged on negative event.
- Fix Parent actuator false activation on negative event
- Loop Ipo curve not restarting at correct frame when start frame is
different from one.
+ 'scons blenderplayer' builds blender AND blenderplayer now (tested on Linux
only, but was only linking issue, so should work on other platforms too).
NOTE: I noticed some compileflags for GE specific libs that were left out -
I re-enabled them in the SConscripts, but I'm going to do a test build my-
self now, so if there are problems with them on win32, I probably already
know about them :)
* This commit is all of the rewrite work done on the SCons system. For
documentation see doc/blender-scons.txt and doc/blender-scons-dev.txt.
Also http://mediawiki.blender.org/index.php/BlenderDev/SconsRefactoring
contains valuable information, along with what still needs to be done.
- linux, os x and windows compile now.
- files are compiled to BF_INSTALLDIR (see config/(platform)-config.py)
- NOTE: Jean-Luc P will commit sometime during the weekend proper
appit() for OS X. For now, copy the resulting binary to an
existing .app bundle.
- features:
- cleaner structure for better maintenance
- cleaner output during compile
- better handling of build options
- general overall speed increase
- see the wiki for more info
Cygwin, FreeBSD and Solaris systems still need work. For these systems:
1) copy a config/(platform)-config.py to ie. config/cygwin-config.py
2) set the proper defaults for your platform
3) mail me at jesterking at letwory dot net with you configuration. if
you need any modifications to the system, do send a patch, too.
I'll be giving first-aid today and tomorrow, after that it'll be all
regular development work :)
/Nathan
Keyboard sensors can now hook escape key. Ctrl-Break can be used from within blender if you've forgotten an end game actuator.
Fixed a stupid bug preventing some actuators working (like TrackTo).
Profiling revealed that the SceneGraph updated every physics object, whether it moved or not, even though the physics object was at the right place. This would cause SOLID to go and update its bounding boxes, overlap tests etc.
This callback handles the special case (parented objects) where the physics scene needs to be informed of changes to the scenegraph.
Added Python attributes (mass, parent, visible, position, orientation, scaling) to the KX_GameObject module.
Make KX_GameObject use the KX_PyMath Python <-> Moto conversion.
[SCons] Build with Solid as default when enabling the gameengine in the build process
[SCons] Build solid and qhull from the extern directory and link statically against them
That was about it.
There are a few things that needs double checking:
* Makefiles
* Projectfiles
* All the other systems than Linux and Windows on which the build (with scons) has been successfully tested.
* Blender static now links. By default this option is disabled on all
platforms. Simply set the option in config.opts to 'true'.
* Added the following flags to config.opts:
- HOST_CC. This is the C compiler for the host platform. This value is the
same as TARGET_CC when not cross compiling.
- HOST_CXX. This is the C++ compiler for the host platform. This value is
the same as TARGET_CXX when not cross compiling.
- TARGET_CC. This is the C compiler for the target platform.
- TARGET_CXX. This is the C++ compiler for the target platform.
- TARGET_AR. This is the linker command for linking libraries.
- PATH This is the standard search path
All SConscript files have been updated to reflect these changes. Now it's
possible to change only the root SConstruct file, and all compiler specific
variables are passed automatically to all SConscript files. Of course, this
does not apply to makesdna because there the host and target platform is
different from all other libraries.
To pass a variable that applies to all platforms, all we now have to do is
set the correct value in library_env
Note: as usual, to get the latest options in the config.opts file, first
remove your version.
* libraries are now generated in [BUILD_DIR]/lib
* passed the user_options to all libraries now.
This means I could remove a couple of Export/Import lines.
* Changed the order in source/blender/src/SConscript and
source/gameengine/SConscript.
All libraries are now sorted alphabetically. This has no impact on the build
process.
* Windows .exe file now includes the blender icon.
* Builds with game engine on Windows only.
I tried building the game engine on Linux, but I get weird errors when
building with ode. There's a dirty #include path in
Physics/BlOde/OdePhysicsEnvironment.cpp (../ode/src/joint.h). gcc doesn't
like this somehow.
* Other platforms need to add a couple of flags to the SConstruct:
use_sumo, use_ode, solid_include and ode_include
Materials are exported the best we can do by now. It will look almost as in
blender except for the missing procedural textures and some minor issues.
You have to tweak normal modulation amount to get the desired result cause
is not the same in yafray.
We added a panel in render space to adjust some yafray settings (GI and so)
Also we export transparency and reflection using new raytracing settings,
but that will be changed and improved soon.
Remember that you have to set YFexport path in user defaults and yafray must
be on path (version 0.0.6)
We added the "yafray" button to activate all this stuff in the render window.
Panel and settings are only shown when checked.
So now when activated the code calls yafray export instead of the internal
renderer and finally the resulting image is loaded back into render window's
buffer. So animation is also possible and results can be saved using blender
usual scheme.
(adding)
#ifdef HAVE_CONFIG_H
#include <config.h>
#endif
also the Makefile.in's were from previous patch adding
the system depend stuff to configure.ac
Kent
--
mein@cs.umn.edu
