Test added to the unittest plugin / test_vlib.py
Type: improvement
Signed-off-by: Dave Barach <dave@barachs.net>
Change-Id: I73445e57918347c102ff6f5e8c9ddb9bd96f1407
(cherry picked from commit 4de5f9be88857197ddf17e3bff66318f78f4b6bb)
Type: fix
When enabling the endpoint independent NAT44 plugin, user_sessions
determines the maximum number of translations that can be active for
a single inside address. If 0 is passed in, a default value is used
but 0 is still stored in the field that is used to populate reply
messages to nat44_ei_show_running_config,
At the time of enabling the plugin, if user_sessions is 0, update the
field which is used by nat44_ei_show_running_config to contain the
default per-user limit which gets used by the EI nodes.
Change-Id: I6b060d85bcd42d91db879b95a8b07c6844bcd2a5
Signed-off-by: Matthew Smith <mgsmith@netgate.com>
- Temporary fix for intermittent unrelated test failure
on AARCH64 CI verify/merge jobs. To be reverted
when the root cause is fixed.
Type: test
Change-Id: Ie28e5a7b9fa9a20469ac7e91766f4c226e44d244
Signed-off-by: Dave Wallace <dwallacelf@gmail.com>
- Improve readability of log output with respect
to worker role
Type: test
Signed-off-by: Dave Wallace <dwallacelf@gmail.com>
Change-Id: I1a5787421b31483fa1a2558951568417dfc111d9
- Required to get VCLAppWorker stdin / stdout data
into log.txt when a test fails.
Type: test
Change-Id: I4db467986940f701750aec6d842a4d9aee22b4e6
Signed-off-by: Dave Wallace <dwallacelf@gmail.com>
Replace VRF test testing multiple scenarios into more simpler tests to
improve readability and ease of debugging.
Type: refactor
Signed-off-by: Klement Sekera <ksekera@cisco.com>
Change-Id: Ibaad5328c73b401f52c5fe513dc0ed68ff3e3374
- Generate copyright year and version
instead of using hard-coded data
Type: refactor
Signed-off-by: Dave Wallace <dwallacelf@gmail.com>
Change-Id: I6058f5025323b3aa483f5df4a2c4371e27b5914e
- Don't close the socket and don't stop receiving
until after draining the existing data in the
socket.
Type: fix
Signed-off-by: Dave Wallace <dwallacelf@gmail.com>
Change-Id: I38dfff4d6273eeddb5196f5cf2a60b580e1c93e6
A given interface counter (e.g rx) can be accessed via
/interfaces/<interface_name>/<counter_name>.
Same goes with nodes: /nodes/<node_name>/<counter_name>
As interfaces may contain '/' in their names,
these are replaced by '_' in symlinks
Also added 2 tests for the stat segment
Type: feature
Signed-off-by: Arthur de Kerhor <arthurdekerhor@gmail.com>
Change-Id: I27da252e7b3dc177815616ca46b5c200a456bf0f
Signed-off-by: Ole Troan <ot@cisco.com>
While running test:
==============================================================================
NAT44ED Test Case
==============================================================================
==>
==============================================================================
NAT44ED Test Case [main thread only]
==============================================================================
==============================================================================
NAT44ED Test Case [1 worker thread]
==============================================================================
==============================================================================
NAT44ED Test Case [4 worker threads]
==============================================================================
Type: improvement
Signed-off-by: Klement Sekera <ksekera@cisco.com>
Change-Id: I61904b411ff1b58700564698079dc4c07cea5c5e
Move info from vpp_papi_provider to .api/vpp_objects
Change-Id: Iaf46483fda2840dfec8d37e0b9262e1c9912be59
Type: test
Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
Introduce MAX_CPUS parameters to control maximum number of CPUs used by
VPP(s) during testing, with default value 'auto' corresponding to all
CPUs available.
Calculate test CPU requirements by taking into account the number of
workers, so a test requires 1 (main thread) + # of worker CPUs.
When running tests, keep track of both running test jobs (controlled by
TEST_JOBS parameter) and free CPUs. This then causes two limits in the
system - to not exceed number of jobs in parallel but also to not exceed
number of CPUs available.
Skip tests which require more CPUs than are available in system (or more
than MAX_CPUS) and print a warning message.
Type: improvement
Change-Id: Ib8fda54e4c6a36179d64160bb87fbd3a0011762d
Signed-off-by: Klement Sekera <ksekera@cisco.com>
Introduce a new option DEBUG=attach to run a test against existing
already running vpp. A new target 'make test-start-gdb' will spawn VPP
in gdb for this purpose. Customization options explained in test-help.
Type: improvement
Change-Id: Ia160a85b33da3b2df292d44bb95729af9dd9da96
Signed-off-by: Klement Sekera <ksekera@cisco.com>
Type: fix
The fib source IP6_ND is used for all link-local entries, hence
solicitation responses were sent for a peer's address. Constrain the
source check to also in clude the LOCAL flag, which indicates that the
link-local address is ours.
Signed-off-by: Neale Ranns <neale@graphiant.com>
Change-Id: Iba7e66049e4d89ee3f36d77aeb09310b978d70de
This change allows one to inject multiple streams for different workers
on the same PG interface at the same time.
Type: improvement
Change-Id: I29d80369aabada261eda466e5a5d8d3518bb8bc8
Signed-off-by: Klement Sekera <ksekera@cisco.com>
- Refactor make test code to be co-located with
the vpp feature source code
Type: test
Signed-off-by: Dave Wallace <dwallacelf@gmail.com>
Change-Id: I66379dfe671628e39dfc9685c4fd70fa0e566f6f
- Refactor make test code to be co-located with
the vpp plugin source code
Type: test
Signed-off-by: Dave Wallace <dwallacelf@gmail.com>
Change-Id: I09d55301665449b3f183191537749435f806fb15
- Refactor make test code to be co-located with
the vpp feature source code
Type: test
Signed-off-by: Dave Wallace <dwallacelf@gmail.com>
Change-Id: Iceaeab769c08e541b31546663d0e402ced862e5b
Make test-checkstyle-diff is a new target which checks PEP8 compliance
only for changed files. This makes it faster to execute and also more
readable as most of the time, only changed files will fail.
Type: improvement
Signed-off-by: Klement Sekera <ksekera@cisco.com>
Change-Id: I71baca76ab3a21a7a3790617cbfb0d48aacbd9ec
This module implement Python access to the VPP statistics segment. It
accesses the data structures directly in shared memory.
VPP uses optimistic locking, so data structures may change underneath
us while we are reading. Data is copied out and it's important to
spend as little time as possible "holding the lock".
Counters are stored in VPP as a two dimensional array.
Index by thread and index (typically sw_if_index).
Simple counters count only packets, Combined counters count packets
and octets.
Counters can be accessed in either dimension.
stat['/if/rx'] - returns 2D lists
stat['/if/rx'][0] - returns counters for all interfaces for thread 0
stat['/if/rx'][0][1] - returns counter for interface 1 on thread 0
stat['/if/rx'][0][1]['packets'] - returns the packet counter
for interface 1 on thread 0
stat['/if/rx'][:, 1] - returns the counters for interface 1 on all threads
stat['/if/rx'][:, 1].packets() - returns the packet counters for
interface 1 on all threads
stat['/if/rx'][:, 1].sum_packets() - returns the sum of packet counters for
interface 1 on all threads
stat['/if/rx-miss'][:, 1].sum() - returns the sum of packet counters for
interface 1 on all threads for simple counters
Type: refactor
Signed-off-by: Ole Troan <ot@cisco.com>
Change-Id: I1fe7f7c7d11378d06be8276db5e1900ecdb8f515
Signed-off-by: Ole Troan <ot@cisco.com>
- Required to relocate test infra modules
to be co-located in feature test directory.
- Remove/regenerate build-root/build-test/src/
soft links when running make test to allow
re-running 'make test' after moving source files.
- Suppress annoying 'ls' error message when gathering
test source files caused by 'c' test application
directory being named 'test'.
- Use PYTHONPYCACHEPREFIX to generate all
compiled source under build-root/build-test.
This only works for python 3.8 or greater, but
existing 'make test-wipe' target cleans up
in-situ __pycache__ directories for older
python versions.
Type: fix
Change-Id: If3c3ff0c58fb26a17395babc34783e06b1dd84e7
Signed-off-by: Dave Wallace <dwallacelf@gmail.com>
VppTestCase now has vpp_worker_count property set to number of workers.
This can be overriden by child classes. Also overriden by
VPP_WORKER_CONFIG variable for legacy reasons.
Type: improvement
Change-Id: Ic328bacb9003ddf9e92815767653bd362aa7f086
Signed-off-by: Klement Sekera <ksekera@cisco.com>
Even though we don't use shm transport anymore, vpp still populates shm.
Add cleanup before running tests to avoid the nuisance of running out of
space on /dev/shm.
Type: fix
Fixes: eb506becd038f081bc7ac340412d3685425bb8b4
Signed-off-by: Klement Sekera <ksekera@cisco.com>
Change-Id: I2ef87e991223ee60892d56af1482025d91e77d46
Not used anymore with socket transport.
Type: improvement
Signed-off-by: Klement Sekera <ksekera@cisco.com>
Change-Id: I7061048dee21ce02637e34f73fb9984bd241f7df
Type: feature
an client can dump the existing sources, examine their
priorities, then define thier own source.
Usefull if a client wants to distingusih between say, static,
ospf, bgp, etc routes it has added over the API.
Signed-off-by: Neale Ranns <nranns@cisco.com>
Signed-off-by: Alexander Chernavin <achernavin@netgate.com>
Change-Id: I5158b4fa1ebe87381ff8707bb173217f56ea274a
Type: feature
This feautre only applies to ESP not AH SAs.
As well as the gobal switch for ayncs mode, allow individual SAs to be
async.
If global async is on, all SAs are async. If global async mode is off,
then if then an SA can be individually set to async. This preserves the
global switch behaviour.
the stratergy in the esp encrypt.decrypt nodes is to separate the frame
into, 1) sync buffers, 2) async buffers and 3) no-op buffers.
Sync buffer will undergo a cyrpto/ath operation, no-op will not, they
are dropped or handed-off.
Signed-off-by: Neale Ranns <neale@graphiant.com>
Change-Id: Ifc15b10b870b19413ad030ce7f92ed56275d6791
Type: improvement
In the current scheme an async frame is submitted each time the crypto
op changes. thus happens each time a different SA is used and thus
potentially many times per-node. thi can lead to the submision of many
partially filled frames.
change the scheme to construct as many full frames as possible in the
node and submit them all at the end. the frame owner ship is passed to
the user so that there can be more than one open frame per-op at any
given time.
Signed-off-by: Neale Ranns <neale@graphiant.com>
Change-Id: Ic2305581d7b5aa26133f52115e0cd28ba956ed55
This fix the classify filter if we attach several different filters.
This also fix some issues with l3 and l4 parsing.
Type: fix
Change-Id: I9dc6c55049a3bbc0110d1097b40d9da27633626b
Signed-off-by: Benoît Ganne <bganne@cisco.com>
Make the ipsec[46]-tun-input nodes siblings of device-input so that
input features can be enabled on them. Register ipsec-tun for feature
updates. When a feature is enabled on the device-input arc and the
ifindex is an IPSec tunnel, change the end node of the arc for that
ifindex to be the appropriate ESP decrypt node. Set a flag on the
tunnel to indicate that the feature arc should be started for packets
input on the tunnel.
Test input policing on ESP IPSec tunnels.
Type: improvement
Signed-off-by: Brian Russell <brian@graphiant.com>
Change-Id: I3b9f047e5e737f3ea4c58fc82cd3c15700b6f9f7
