Commit Graph

349 Commits

Author SHA1 Message Date
0777915b2a ubuntu 16.04 build support. Supporting systemd with vpp.service files.
Incorporating review comments : modified debian/control dependencies

Change-Id: Ib2fe85d81eb7f1803ef8f54294c7c18cd07c61ba
Signed-off-by: Srivatsa Sangli <srivrama@cisco.com>
2016-04-20 18:44:41 +00:00
e5055d21a9 Allow L3 forwarded jumbo packets on Bonded Interfaces
Set max L3 packet size allowed to the lowest value of the slave links.
Also cleanup FIXME's for VMXNET3 driver.

Change-Id: Ia5cf742f2ab13b8cdc8ea6286f56464ee4f8c51d
Signed-off-by: John Lo <loj@cisco.com>
2016-04-20 17:25:27 +00:00
6855f6cdfe Python-API: Inital commit of Python bindings for the VPP API.
See: https://wiki.fd.io/view/VPP/Python_API

Change-Id: If135fc32208c7031787e1935b399d930e0e1ea1f
Signed-off-by: Ole Troan <ot@cisco.com>
2016-04-20 16:50:29 +00:00
633951c3d8 delete loopback interface cli
(to be consistent with other delete interface commands)

Change-Id: I41f63cc5b11d9fa9489edc54b17a4d857b711b66
Signed-off-by: Alpesh S. Patel <apatel9191@hotmail.com>
2016-04-20 16:25:19 +00:00
c02f02d64e Cleaned up formatting in device.c - no functionality changes.
Change-Id: Ia7d83784d50b3651117201b876464528d015edea
Signed-off-by: Keith Burns (alagalah) <alagalah@gmail.com>
2016-04-20 11:24:50 +00:00
514f651eae Change from nsh-encap to nsh-vxlan-gpe within nsh vxlan tunnel's short_help
Change-Id: Ifeba2e9857a112139b7be6436b59f05858f1abf9
Signed-off-by: Hongjun Ni <hongjun.ni@intel.com>
2016-04-20 03:47:00 +00:00
8358ff95ee Move "ethernet" debug cli commands to "set interface"
Following two commands are changed:

ethernet mtu -> set interface mtu
ethernet promiscuous -> set inteface promiscuous

Change-Id: I5037e021933156c06044fb723a05ad330f8162b7
Signed-off-by: Damjan Marion <damarion@cisco.com>
2016-04-20 03:21:51 +00:00
ec177abc1a Add TAG=vpp_gcov which compiles vpp to produce .gcda files
Change-Id: Ib6a0940e08f9e0983f3ec70f9e8488c2185ca4da
Signed-off-by: Dave Barach <dave@barachs.net>
2016-04-20 03:13:54 +00:00
dae88b9a53 VPP-6: set epoll wait-time to zero when binary API messages are waiting
Change-Id: I629ef98ecd3b729d2564b3a1ba8c6039f854f86c
Signed-off-by: Dave Barach <dave@barachs.net>
2016-04-19 09:38:53 -04:00
a4f16a0e57 Add API to get the dpdk interface stats delta.
Internally change the clearing and displaying of the dpdk stats to be
based on deltas.

Change-Id: I76605ac67492a374ff5522ff44d4a0190cf94e18
Signed-off-by: Todd Foggoa (tfoggoa) <tfoggoa@cisco.com>
2016-04-18 14:26:48 +00:00
fef15b4bb8 Add support for AArch32
gcc version 4.9.2 (Raspbian 4.9.2-10)
Tested on Linux raspberrypi 4.4.6-v7+  SMP Tue Apr 12 16:33:02 BST 2016 armv7l GNU/Linux

CPUs may be little or big endian, detect with gcc flags, not the processor architecture
Add a new flag $(PLATFORM)_uses_openssl which allows to disable the link with openssl lib.

vlib/vlib/threads.c:
startup.conf must:
- specify the heapsize as we don't have hugepages on raspbian

cpu {
  main-core 3
}
heapsize 64M

Corrects in various files the assumption uword == u64 and replaces 'u64' cast with 'pointer_to_uword' and 'uword_to_pointer' where appropriate.
256 CPUs may create an OOM when testing with small memory footprint ( heapsize 64M ), allows the number of VLIB_MAX_CPUS to be set in platforms/*.mk

vppinfra/vppinfra/longjmp.S:
ARM - copy r1 (1st parameter of the setjmp call) to r0 (return value)

vppinfra/vppinfra/time.h:
On ARMv7 in AArch32 mode, we can access to a 64bit register to retreive the cycles count.
gcc on rpi only declare ARM_ARCH 6. Override this info, and check if it is possible to use 'mrrc'.
/!\ the time function will NOT work without allowing the user mode access to the PMU.
You may download the source of the kmod here:
https://github.com/christophefontaine/arm_rdtsc

Change-Id: I8142606436d9671a184133b935398427f08a8bd2
Signed-off-by: Christophe Fontaine <christophe.fontaine@qosmos.com>
2016-04-18 13:20:57 +00:00
7a2a378d2d dpdk socket-mem handling optimizations
- introduces default socket-mem size of 512 MB per socket
 - default socket-mem value is applied to all discovered CPU sockets
 - fixes bug when < 1024 socket-mem parameter is specified
 - for socket-mem < 1024 code prefers 2 MB pages
 - improves handling of manualy specified socket-mem values

Change-Id: I9ef848108d7dd1228fbd82a5be49eb5277a93683
Signed-off-by: Damjan Marion <damarion@cisco.com>
2016-04-17 18:26:17 +02:00
f5bf6ddbf2 Using classifier/ACL from now on. Changes pertaining to that.
Change-Id: I682b9a361c7308d6d0abb9d7d0320215f0d91e50
Signed-off-by: rangan <rangan@cisco.com>
2016-04-16 17:33:19 +00:00
6bfd2633a1 ENIC driver patch to fix rx miss or drop counters
Change-Id: Ic05d182a5659417e91b85c0ae20b6822a5445945
Signed-off-by: John Lo <loj@cisco.com>
2016-04-16 00:00:17 -04:00
007622cfd6 af_packet: clear bitmap entries when processing input
Need to clear the bitmap entry when processing each input file
descriptor.

This becomes an issue on interface deletion. A crash occurs due
to assertion in a debug image

https://gerrit.fd.io/r/#/c/615/ - removed the code when this was set
again, but the bitmap needs to be cleared

Change-Id: I7cccb9bf8b9b2eb5a7f60ecda7530784a9512116
Signed-off-by: Peter Lei <peterlei@cisco.com>
2016-04-15 15:04:48 +00:00
51c02a4778 Remove historical netconf message switch APIs
The scheme is unused, and never to be used again; it was a bad idea in
the first place.

Change-Id: I1479a1fa9191e0374e00f7326545d216c3a11e32
Signed-off-by: Dave Barach <dave@barachs.net>
2016-04-15 08:25:20 -04:00
595395d47b Took care of code review comments. Extended the fix to other files.
Change-Id: I24e688884cd5896b317efb53e1d193f7d363715a
Signed-off-by: rangan <rangan@cisco.com>
2016-04-15 11:00:39 +00:00
b92feb6bd3 Add LISP API
SET API:
	lisp_add_del_locator_set
	lisp_add_del_locator
	lisp_add_del_local_eid
	lisp_gpe_add_del_fwd_entry
	lisp_add_del_map_resolver
	lisp_gpe_add_del_iface

SHOW API:
	lisp_locator_set_dump
	lisp_local_eid_table_dump
	lisp_gpe_tunnel_dump
	lisp_map_resolver_dump

Change-Id: Ie7f521e7e64ad2736b8417852b38454bfdef3728
Signed-off-by: Andrej Kozemcak <akozemca@cisco.com>
2016-04-15 09:07:08 +02:00
95db563571 Fix dependency install on Ubuntu 16.04
Change-Id: I2a915a64c65ee78658ee782c0f16963024b8b2eb
Signed-off-by: Damjan Marion <damarion@cisco.com>
2016-04-14 23:29:48 +00:00
a42cd34f10 Rework of DPDK PCI device uio driver binding process
This is complete rework of DPDK PCI initialization. It drops
previous scheme where lspci/route/awk/sed are used and instead
sysfs is solely used for discovering Ethernet PCI devices. Criteria
for blacklisting device is changed from exsiting routing table entry
to simple interface state obtained by SIOCGIFFLAGS ioctl().
It checks for IFF_UP flag, so as long as interface is declared
up and even when carrier is down interface will be blacklisted.

Change-Id: I59961ddcf1c19c728934e7fe746f343983741bf1
Signed-off-by: Damjan Marion <damarion@cisco.com>
2016-04-14 23:29:13 +00:00
550b5f6252 Init rte_mbuf length fields in af_packet driver
Change-Id: I30cdad9585c1457c0d8ceecb3e5110ad40740021
Signed-off-by: Damjan Marion <damarion@cisco.com>
2016-04-14 23:29:04 +00:00
d1f5d04798 Change ARP and IP6-ND nodes to use interface-output node for output
The current mechanism for setting up arp-input and ip6-discover-neighbor
output nodes for interfaces using their interface link up/down callback
function is inefficient and has potential timing issue, as observed for
bonded interface. Now both nodes will setup output interface sw_if_index
in the the sw_if_index[VLIB_TX] field of current packet buffer and then
use the interface-ouput node to tx the packet.

One side effect is that vlib_node_add_next_with_slot() needs to be
modified to allow the same output node-id to be put at the specified
slot, even if another slot contain that same node-id already exist. This
requirement is caused by BVI support where all loopback interfaces set
up as BVIs will have the same output node-id being l2-input while, for
output-interface node, the output slot must match the hw_if_index of the
interface.

Change-Id: I18bd1d4fe9bea047018796f7b8a4d4c20ee31d6e
Signed-off-by: John Lo <loj@cisco.com>
2016-04-14 23:06:54 +00:00
e10e372e5a Fix vppinfra unit tests
"make check" in build-root/build-$tag-$arch/vppinfra should now work on a
machine with 3G of spare memory

Change-Id: Ie6a22e8496b56b93aa90fdc81e3e0c10dc7514fb
Signed-off-by: Florin Coras <fcoras@cisco.com>
2016-04-14 14:09:49 +00:00
a991e50f7d Move autogenerated vnet files to config folder
This cleans up vnet folder however it doesn't clean the existing
autogenerated files. I'm not aware of any automated solution to achieve
this without involving git.

Change-Id: Ib29869e08e1d3bd87b7b54bc414f88bd9c632372
Signed-off-by: Florin Coras <fcoras@cisco.com>
2016-04-14 14:02:58 +00:00
0930649eb6 Opaque index is not populated when ACL is configured. Fixed it.
This is inline with ip6_classify.c

Change-Id: Ib6e1f6fa3e4669e0a94e4ae2da48eacb240d192b
Signed-off-by: rangan <rangan@cisco.com>
2016-04-14 14:00:02 +00:00
25fd944a08 VHOST counters reversed
VHOST counters are reversed. RX packet count
    are shown as TX and vise-versa in "show hardware"
    statistics.

Change-Id: Ie1d41f1f0845edf495cdf34ca65466fc307940c6
Signed-off-by: Shesha Sreenivasamurthy <shesha@cisco.com>
2016-04-13 11:16:09 -07:00
b270789741 Create macro for next_nodes used in lookup family of nodes
This should help when adding new adjacency types

Change-Id: I1832c6b7a80b6bc69ed83423a60511b7932f336f
Signed-off-by: Damjan Marion <damarion@cisco.com>
2016-04-13 13:42:07 +00:00
ba22b8e6c1 Added a LICENSE file
Change-Id: Iba5dbd74baf18e07a986d30ee67fcff334f5f206
Signed-off-by: Ed Warnicke <eaw@cisco.com>
2016-04-12 19:40:14 -05:00
619ac1c84c Porting 2 dpdk patches to dpdk 16.04 patches
Change-Id: If298d0ba4941b3c8ccec3b407080661b4a06ac5b
Signed-off-by: Todd Foggoa <tfoggoa@cisco.com>
2016-04-12 20:34:21 +00:00
370a24e36e Creating a new CLI to create loopback interfaces to make the interface
creation cli consistent

Change-Id: I72f074bb8c771511cb5203af6905adccefbb4197
Signed-off-by: Alpesh Patel <apatel9191@hotmail.com>
2016-04-12 16:01:40 +02:00
b3e80947dc IP6 FIB: Micro optimization in lookup
The mask is increasingly small.
This saves a few cycles and becomes significant when there are many
prefix lengths.

Change-Id: Ibd0c9331f675697bb4e90e8ad617994f83edec9c
Signed-off-by: Pierre Pfister <ppfister@cisco.com>
2016-04-12 12:12:50 +00:00
c42552d4e0 Add support for DPDK 16.04 release, rebase some of 2.2.0 patches
Change-Id: I08292ba39dc6012c2edbcdaed0b02a8ebe07aec4
Signed-off-by: Damjan Marion <damarion@cisco.com>
2016-04-12 12:11:15 +00:00
254b036dff Add unit test infrastructure for LISP protocol
Change-Id: I802700ad832de1dc6f4a1981e8985aa6e926c8ad
Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
2016-04-12 11:47:39 +00:00
42f2006975 Add counter for the number of barrier syncs performed.
Change-Id: I42b26c8f95c17577006f13e3419b8ccc9ef7c4f3
Signed-off-by: Todd Foggoa <tfoggoa@cisco.com>
2016-04-12 11:44:50 +00:00
cbed90c8cb Add a configurable "significant error" metric
Change-Id: Idda59272a029ffcbc029f9bb167508d7bd5e6e21
Signed-off-by: Dave Barach <dave@barachs.net>
2016-04-12 03:44:46 +00:00
ecec279029 vagrant: libvirt configuration.
Configure the proxy, vcpu, and memory parameters for the libvirt provider.

Change-Id: Id662e60f76b4b424d3a5d98929a44ef2587ef258
Signed-off-by: Jeff Shaw <jeffrey.b.shaw@intel.com>
2016-04-11 21:02:00 +00:00
e41b49490d Add a counter for unknown IPv6 hop-by-hop options.
Change-Id: I3db82b71ae5e32e0f2230662497a05e57ddb6755
Signed-off-by: Yoann Desmouceaux <ydesmouc@cisco.com>
2016-04-11 17:04:29 +02:00
f53b7d5e97 Fix possible infinite loop in IPv6 hop-by-hop header parsing
Unknown hop-by-hop options are currently not processed, which triggers an
infinite loop due to the pointer not advancing further in the header.

Change-Id: Idf9176090e042b17aac1baa25a6cb4beb8c199d8
Signed-off-by: Yoann Desmouceaux <ydesmouc@cisco.com>
2016-04-11 14:49:56 +00:00
5ac4a0f76a Propagate the VLIB_FRAME_NO_FREE_AFTER_DISPATCH flag to cloned next_frames
Without this, frames can be double-freed to nodes like "error-punt",
leading to buffer leaks and other problems.

Change-Id: Ie28a4f504254ee439f720dbaac7f12206cea753b
Signed-off-by: Todd Foggoa <tfoggoa@cisco.com>
2016-04-11 14:23:34 +00:00
608d1edf74 Add vnet_rename_interface API
Change-Id: I9a8e1ed310aa9a72644540856426c77f61f4b4bb
Signed-off-by: Todd Foggoa <tfoggoa@cisco.com>
2016-04-11 13:18:02 +00:00
5ba5f83b79 Bump DPDK 16.04 to RC4
Change-Id: Ia9affeee54e860b6039d7ee0f411bd022b1dc76c
Signed-off-by: Damjan Marion <damarion@cisco.com>
2016-04-11 13:04:16 +00:00
c47e979674 Add configure option to enable building unit tests
Same template should be used for other libs...

Change-Id: Icc771cb6b243d215f30fb51c0dbc028e497a74c6
Signed-off-by: Damjan Marion <damarion@cisco.com>
2016-04-11 13:03:30 +00:00
dba76f29e6 Add option to delete af_packet (host) interfaces
Change-Id: Iab76951758ae9b9a99d679a223941a4b8c683078
Signed-off-by: Alpesh S. Patel <apatel9191@hotmail.com>
Signed-off-by: Damjan Marion <damarion@cisco.com>
2016-04-11 11:38:28 +00:00
d530445067 fix uninitialized vars warnings with -Os
Change-Id: I15a16ba9751b6b612bac61a160b5da394ed2e15c
Signed-off-by: Benoît Ganne <bganne@kalrayinc.com>
2016-04-08 22:25:44 -07:00
7c38f1ff14 Migrate bootstrap.ubuntu.sh to using top level Makefile
This script moves to using the top level Makefile
in vagrant.

The reason for not merging yet is to make sure that we
don't put the training at risk.  The patch should
be fine (its been tested), but better safe than sorry.

Change-Id: Ic57cfe1f26867c820784e5511d418e68f24b5fcd
Signed-off-by: Ed Warnicke <eaw@cisco.com>
2016-04-09 03:09:51 +00:00
e5f42feb4f Add IKEv2 APIs
Change-Id: I5936b05aa927b67c707b5858ffee45fc7a5d2043
Signed-off-by: Matus Fabian <matfabia@cisco.com>
2016-04-09 03:02:31 +00:00
b2cdd2f5f0 Add Rx and Tx statistics within nsh-vxlan-gpe node
PatchSet2: Modify the code according to review comments.

PatchSet3: modify sw_if_index1 in encap.c.

Change-Id: Ic4d3ee19a0ba0fa10568e570a79a3cb85cfbc9ab
Signed-off-by: Hongjun Ni <hongjun.ni@intel.com>
2016-04-08 14:38:43 +00:00
639b4bded6 Change encap-fib-id and decap-fib-id within create_nsh_vxlan_gpe_tunnel_command
Change-Id: Ied5275fcea21ae2e0b346931f9e2f520a73afd67
Signed-off-by: Hongjun Ni <hongjun.ni@intel.com>
2016-04-07 15:04:27 +00:00
08fa373d2b Add key.pad=0 within vnet_nsh_vxlan_gpe_add_del_tunnel
Change-Id: Ieed704ed0c3d747afc9836671f2ea9cc396ee09d
Signed-off-by: Hongjun Ni <hongjun.ni@intel.com>
2016-04-07 15:02:56 +00:00
e1ed8bddb4 Change key.src=a->dst.as_u32 within vnet_nsh_vxlan_gpe_add_del_tunnel
Change-Id: Ica062e532d116cc1806d73f2fa85db89402928a4
Signed-off-by: Hongjun Ni <hongjun.ni@intel.com>
2016-04-07 15:01:36 +00:00