Type: fix
Since DPDK is now compiled by meson but some compiles in VPP is
missing. This patch fixes that.
- Fixes QAT PMD not compiled. QAT meson compile, even for sym
crypto PMD, is happened in drive/compress/qat. Originally all
PMDs in compressdev is disabled by default. This patch fixes
that.
- Fixes DPDK plugin version detection. DPDK meson build
generates rte_build_config.h, which containing all version
information in build-dpdk instead of rte_config.h in make.
This patch uses the file to detect version data.
- Removed SW crypto PMD auto-creation in cryptodev engine. In
case the AESNI-MB PMD required shared library is missing.
Signed-off-by: Fan Zhang <roy.fan.zhang@intel.com>
Change-Id: I7cd91abb5de303ff5e4c55cd05e011b57f883524
If libbsd is detected by the DPDK build system, DPDK does not provide
implementations for strlcpy and dynamically link against the one
provided by libbsd. When the DPDK plugin is loaded by VPP, a crash
occurs because libbsd is not loaded by VPP.
Type: fix
Change-Id: Ib691bbe27edcf0f6f0a3d39952e439027cef72cb
Signed-off-by: Mohammed Hawari <mohammed@hawari.fr>
This patch bumps the engine's intel-ipsec-mb version from 0.52 to
0.53, to avail performance improvement brought by the library.
Type: feature
Signed-off-by: Fan Zhang <roy.fan.zhang@intel.com>
Change-Id: I939803015dece91ca59a7fe2120e2131d29e1c55
This adds support to compile the bnxt PMD that supports Broadcom's
10/25/40/50/100/200 Gbps NICs. Tested with modified DPDK driver on
x86_64 and aarch64 targets that is pending upstream acceptance, but
should compile just fine today.
Type: feature
Signed-off-by: Andy Gospodarek <gospo@broadcom.com>
Change-Id: I735a991c4cae4fa77e5605094facea54b781a1db
Type: fix
The scenario is touch of a dpdk source file in places like
<TOP>/build-root/build-vpp-native/external/dpdk-19.08/. The subsequent
build will trigger an rm -rf $(PACKAGE_INSTALL_DIR) by
build-root/Makefile at around line 709. Because the package in
question, "external", consists of various "sub" packages, all of which
are controlled with files like .quicly.install.ok located in
build-root/build-vpp[_debug]-native/external, we end up not handling the
.*.install.ok files to reflect the removal of that PACKAGE_INSTALL_DIR.
This fix will correct that, at least for the case of touching/changing
dpdk files. A better long term solution would be to change the "sub"
packages to be full fledged build system packages, as Dave Barach points
out.
Signed-off-by: Burt Silverman <burtms@gmail.com>
Change-Id: Ia94ccaa2795cbf354b5921c3001a7141313b66be
rdma-core-25.0 move some symbol to another library, make sure we link
to it.
Type: fix
Fixes: ec757593859bd8c16839ea8a81a2ef4eb8b29539
Change-Id: I6b8a56ea5fc7787d3de0982015ed47b767557c06
Signed-off-by: Benoît Ganne <bganne@cisco.com>
Update quicly to latest version that includes our upstreamed patch.
Change-Id: I0b26c72e49bce81daf4fb069b5818defd6cf25b9
Type: feature
Signed-off-by: Aloys Augustin <aloaugus@cisco.com>
We have native implementation and we should not maintain both....
Change-Id: Ic09ebffda52cdc733b3cfeff06690e0d3cc08084
Signed-off-by: Damjan Marion <damarion@cisco.com>
The current aarch64 version of VPP package distro in cloud repository
(https://packagecloud.io/fdio/master/ubuntu), is built on a ThunderX server,
using some arch-specific options, for example, 128Byte cache line size,
T=arm64-thunderx-linuxapp-gcc, RTE_MACHINE=thunderx
The patch is trying to build package distro with aarch64 generic features,
for both binary type targets, e.g., build/build-release, and package type
targets, e.g., pkg-deb/pkg-rpm, with the generic options, e.g.,
128Byte cache line size, T=arm64-armv8a-linuxapp-gcc, RTE_MACHINE=armv8a
If end users want to build arch specific optimized image,
TARGET_PLATFORM variable could be used, as below example,
$ make build-release/pkg-deb TARGET_PLATFORM=thunderx
Change-Id: If78bca8709fe83db6a95e8c26346f206bf5ea71d
Signed-off-by: Lijian Zhang <Lijian.Zhang@arm.com>
Reviewed-by: Sirshak Das <Sirshak.Das@arm.com>
Reviewed-by: Honnappa Nagarahalli <Honnappa.Nagarahalli@arm.com>
Add option RDMA_CORE_DEBUG=[yn] build option. rdma-core package is built
in Release (-O2) mode by default, but Debug (-O0 -g) mode can be
selected by eg.
make install-ext-deps RDMA_CORE_DEBUG=y
Change-Id: Id4db5ef1e7b13c44d478755a0bfbdbe56cfc13df
Signed-off-by: Benoît Ganne <bganne@cisco.com>
VPP rdma driver relies on an internal rdma-core not compatible with DPDK
MLX driver. Force the use of external rdma-core through
RTE_IBVERBS_LINK_DLOPEN DPDK build option and make sure internal
rdma-core symbols are not leaked outside of the rdma plugin.
Change-Id: I5b2281259f517c4e109d388d172b72eadd69986f
Signed-off-by: Benoît Ganne <bganne@cisco.com>
rx: add batching for WC processing and release
tx: improve batching for WC submission and processing
rdma-core: compile in release mode to remove assert()
Change-Id: I5fb8736db36b50f8b758cd688100477b67e72d80
Signed-off-by: Benoît Ganne <bganne@cisco.com>
Recent patches add rdma-core.
They are not building in Centos because of differences
in cmake. This patch fixes that problem by defining
CMAKE for all external builds.
Change-Id: I3eea869226385207500c5a1217bd7330140ca462
Signed-off-by: Thomas F Herbert <therbert@redhat.com>
Download a single tarball with the sources of quicly and its dependencies from github instead of cloning submodules.
Change-Id: Id9955565d46f595b3a14ba3408c24045d4acd296
Signed-off-by: Aloys Augustin <aloaugus@cisco.com>
We dont't want git pull there, there is simple way to grab tarball
from github for every single commit
Change-Id: I7a98cab7660750e48084279d8b9892cdf229bceb
Signed-off-by: Damjan Marion <damarion@cisco.com>
Currently supports on single stream exposed through standard internal APIs
Based on libquicly & picotls by h2o
Change-Id: I7bc1ec0e399d1fb02bfd1da91aa7410076d08d14
Signed-off-by: Nathan Skrzypczak <nathan.skrzypczak@gmail.com>
RDMA ibverb is a userspace API to efficiently rx/tx packets. This is an
initial, unoptimized driver targeting Mellanox cards.
Next steps should include batching, multiqueue and additional cards.
Change-Id: I0309c7a543f75f2f9317eaf63ca502ac7a093ef9
Signed-off-by: Benoît Ganne <bganne@cisco.com>
Upstream DPDK changed the names of the options to use dlopen()
with libibverbs and libmlx[45] from RTE_LIBRTE_MLX[45]_DLOPEN_DEPS
to RTE_IBVERBS_LINK_DLOPEN (handles both mlx4 and mlx5).
VPP's build option to enable this configuration when building DPDK
no longer worked starting when VPP moved to DPDK 19.02. Update VPP's
build options to enable the correct option name.
Change-Id: I8e34e1d3fc4ee8aac4fd6f2a7d27177f2b0dea50
Signed-off-by: Matthew Smith <mgsmith@netgate.com>
make install-ext-deps broken due to nasm site being offline for days.
curl: (7) Failed to connect to www.nasm.us port 443: Connection refused
curl: (7) Failed to connect to www.nasm.us port 80: Connection refused
Pointing url to mirror at Oregon State University for the time being.
https://ftp.osuosl.org/pub/blfs/conglomeration/nasm/$(nasm_tarball)
Change-Id: I6310337ae6946fbcd5fd653dcd3780ec7e97fe9a
Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
HQoS requires fixes to work with dpdk 19.02 so code is disabled and
pending deprecation unless active maintainer is found.
Change-Id: I3569c4287b6dfdd2c29e02375eb53bf01fa6ae84
Signed-off-by: Damjan Marion <damarion@cisco.com>
Setting DPDK_PMD_TAP=y when building will enable the tap PMD
in the build configuration that is generated for DPDK. Enabling
this currently results in a failure during compilation because
rte_gso.h is not found. RTE_LIBRTE_GSO needs to be set to y for
this to work.
Use the setting for the tap PMD to determine the value for
RTE_LIBRTE_GSO.
Change-Id: Ie395417b1c62369a95320856081ad52c674ce9f2
Signed-off-by: Matthew Smith <mgsmith@netgate.com>
Save a few cycles on every rx and tx burst call by not compiling
in support for DPDK Rx and Tx callbacks. This feature is optional
and unused by current VPP code.
Change-Id: I1916bc8822e2bd405c1ac3909e85467a01023862
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
DPDK has added a lot more drivers and config options that are not
used by current VPP code.
Change-Id: I385f8b5df02b95a31ca9abe506c79cf52e99a24c
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
DPDK has switched to dynamic logging for initialization (since 18.05).
Don't generate config for unused options.
Change-Id: I3f1a5b3b8bee38abc9d0654737b59368646ed0fa
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
