- the FIB path takes a vector of type fib_mpls_label_t not u32 so the untype safe vec_add did not work
- write som eSR-MPLS tests
- allow an MPLS tunnel to resolve through a SR BSID
Change-Id: I2a18b9a9bf43584100ac269c4ebc286c9e3b3ea5
Signed-off-by: Neale Ranns <nranns@cisco.com>
(cherry picked from commit 7c922dc404c2c0a2d67d53ca05db1c1ae1598f44)
When the slave interface is admin up after it is added to the bond group,
lacp does not send lacp pdu's to the interface because its periodic timer
is not running.
The issue was the slave interface's variables got reset after the state
machines were initialized.
Change-Id: I2942556ce29a4acc97db3be40293e69bed7b6679
Signed-off-by: Steven <sluong@cisco.com>
(cherry picked from commit bf21dc85053931bc597e0fab1112061aa60e986b)
Memory allocation changed in DPDK 18.05. The mlx4 and mlx5
PMDs did not support using externally allocated memory.
The patch for mlx5 was generated by Mellanox. That patch was
modified to apply to the mlx4 PMD and tested on Microsoft
Azure.
Patches were originally tested and used with VPP master
(prerelease 18.10). Then backported to VPP stable/1807.
Change-Id: I883e0d796e59702731bec06c96210f0b134188db
Signed-off-by: Matthew Smith <mgsmith@netgate.com>
Not only is it wasteful to send all fragments back through ip4-lookup, but
it doesn't work with tunnel mechanisms that don't have IP enabled on their
payload side.
Change-Id: Ic92d95982dddaa70969a2a6ea2f98edec7614425
Signed-off-by: Ole Troan <ot@cisco.com>
(cherry picked from commit b3655e5592e3e8e48eb087632f3fa71915891a9f)
Several test plugins report undefined symbol while being loaded
by load_one_vat_plugin. Fix this by adding VPP_API_TEST_BUILTIN
into CFLAGS for building these plugins.
Change-Id: I908720fd0d01da1ead30ba17027ba10358f6bdf1
Signed-off-by: Yi He <yi.he@arm.com>
(cherry picked from commit d05ce97724ed8681e80c32a948564d0163994365)
Should not enable nat44-hairpinning node in deterministic mode
Change-Id: I5790323a6842ee71a62c6c91c49166a2839eac12
Signed-off-by: Matus Fabian <matfabia@cisco.com>
Deleting a bihash kvp frees the bucket's backing storage when the
bucket reference count reaches zero. l2fib_scan MUST check for that
condition, and stop scanning the bucket if it occurs. One of the L2
FIB extended "make test" vectors caused this issue 100% of the time.
Change-Id: I250bcc4c1518e16042120fbc4032227a759a602e
Signed-off-by: Dave Barach <dave@barachs.net>
(cherry picked from commit 28374cada08df61180044e24cb758fa570e73c9d)
When the user deletes the last entry in a bihash bucket, the bihash
infra frees the bucket's backing storage. If this happens under
clib_bihash_foreach_key_value_pair - and the freed bucket happens to
be the bucket being traversed - the resulting dangling reference can
easily make the wheels fall off.
Simple fix: if (bucket-is-now-empty) double-break.
Change-Id: Idc44247a82ed5d0ba548507b4a53d4c8503ba8bb
Signed-off-by: Dave Barach <dave@barachs.net>
(cherry picked from commit ca45ee73d7c49c7f659c5cd690d3403d440e50f9)
this receipe:
/* Get a line of input. */
if (!unformat_user (input, unformat_line_input, line_input))
return 0;
only works if there is more data following the registered command name.
So it is not so good for show commands...
Change-Id: I54249865a44526ade4b40e2d6207138a2d056e40
Signed-off-by: Neale Ranns <neale.ranns@cisco.com>
(cherry picked from commit 16be62e3846750b5b7921c0b4d6408477be434f7)
Wrong vl_msg_id set in vl_api_stats_get_poller_delay_t_handler while reporting stats delay.
Change-Id: I7d6ad14359e41c717b976390c58e254e3602e0ff
Signed-off-by: Lukasz Majczak <lma@semihalf.com>
avf_create_reply returns software index for the new interface
Change-Id: I8a6b1a1985b072efafa24eb258b1f2cb1bea1110
Signed-off-by: Jakub Grajciar <jgrajcia@cisco.com>
(cherry picked from commit 4e6014fc9e8611eef16d9267151f1039ff00c190)
Change-Id: I63c36644c9d93f2c3ec6606ca0205b407499de4e
Signed-off-by: Eyal Bari <ebari@cisco.com>
(cherry picked from commit cd30774fa9280736ffaea3e9a51948593e8eebc2)
Signed-off-by: John Lo <loj@cisco.com>
Can happen if code bypasses the per-interface output node, and
dispatches packets directly to the tx node.
Switch to vlib_get_buffers(...) ... vlib_buffer_enqueue_to_next (...),
quad/single loop coding pattern.
Change-Id: Ic0e5d3b9748230f4e545a54186e6e64e7a782bb1
Signed-off-by: Dave Barach <dave@barachs.net>
(cherry picked from commit 78451a6a660cd26a67d2284219f48878a2dfe2c3)
each edge/arc from these nodes must be the same.
Change-Id: Id5dace61bca0af71ad1df98583425226e81fd0de
Signed-off-by: Neale Ranns <neale.ranns@cisco.com>
(cherry picked from commit 8a03e4f97952d84e152f5b17d5325583604c4fd3)
Remove broken special case from l2_input.c:set_int_l2_mode(), which
turns out to confuse the graph dispatch engine.
The loopback TX function needs to push packets to either
ethernet-input or to l2-input, based on bridge / BVI
configuration. Rather than overloading a single graph arc - and making
vain attempts to reconfigure it - create both arcs and use the correct
one.
Rewrote the loopback tx function as an idosyncratic multi-arch
quad/single loop fn.
Change-Id: I15b56ce641d90a11e7b3c7d23859f40e168dd7b2
Signed-off-by: Dave Barach <dave@barachs.net>
For L2 ARP termination, use both brodcast ARP request and reply
packets to provide MAC/IP binding events.
For IP4/IP6 neighbor adress resolution, send resolution events
if there is an address resolution attemp with a static neighbor
entry where both IP and MAC matches. This allow probe of an IP
neighbor with a static entry to confirm it is responding with
a reply matching that of the static entry.
Change-Id: Iffb923bb5aea3f9021436735d5ca06e7b24f966f
Signed-off-by: John Lo <loj@cisco.com>
Add "show version cmdline" to display the command line
Add doxygen tags to the source code
Change-Id: I0205b373062fd88f176d9c8086d89d7784a5172f
Signed-off-by: Dave Barach <dave@barachs.net>
continue statement in case bypasses cleaning up of unserialized
node
Change-Id: I0103d31df2eed3ed04d7cdcdfb790f4d9a376336
Signed-off-by: Dave Cornejo <dcornejo@netgate.com>
When creating a new - as opposed to recycled - debug CLI process node,
perform a proper barrier sync and node runtime update. Otherwise, the
graph replicas diverge for some period of time. That's not immediately
fatal, but it's not a good idea, either.
When renaming a debug cli process node, fix all of the name-vector
replicas before freeing the [one-and-only] name vector.
This fixes the so-called stats segment node runtime scraper crash,
which tripped over a replicated dangling reference to the
recently-freed debug CLI node name.
Change-Id: Ieffabd9f003139e534b9d79b88370439907930e5
Signed-off-by: Dave Barach <dbarach@cisco.com>
Causes clang validation failures. The patch did not actually pass validation; unfortunately it received a +1 from fd.io JJB - presumably due to a race condition
This reverts commit 779c865cc6c7af5bb435d8b3465d80685370edb2.
Change-Id: Ica3697f8f90e67d3eae4debc597f27d7d512004a
Signed-off-by: Dave Barach <dbarach@cisco.com>
thanks to coverity... validate that the length of the packet on
wire matches the size of the header based on the number of groups
and sources. drop those that don't match.
Change-Id: Iab3f3a835f6a43d9c73c5d502ea5ceccdd6985b0
Signed-off-by: Neale Ranns <nranns@cisco.com>
Node serialization is turned off by default. To enable it do:
statseg {serialize-nodes on}
Change-Id: I53bba3cab517bd3ba90eba52d94b3ebb16870141
Signed-off-by: Florin Coras <fcoras@cisco.com>
