Cleanup L2/L3 mode switch to not redirect to/from ethernet-input node
as it is no longer necessary.
L2 patch should use sw_if_index for device feature enable/disable.
Type: fix
Signed-off-by: John Lo <loj@cisco.com>
Change-Id: I0f24161d027b07c188fd1e05276146f94c075710
(cherry picked from commit f415a3b53a51b261d08cc3312c25f250d6bc1bd6)
When vcl_epoll_wait_handle_mq handles rx events exceeding maxevents, VPP will not signal because cursize > 0, and the remaining rx events cannot be triggered because the eventfd event has been read. Therefore, we should dequeue all events until cursize = 0. And then handle msg up to maxevents with vcl_epoll_wait_handle_mq_event and those beyond with vcl_handle_mq_event.
Type: fix
Signed-off-by: hanlin <hanlin_wang@163.com>
Change-Id: I8a0c87cb41c837deb8284b40f668cc3c7d9d6e56
Signed-off-by: hanlin <hanlin_wang@163.com>
(cherry picked from commit d0e646f6892e9c85278c9538760a8940c86dcdbb)
If a cli command is run while there are no cli session, then
cm->cli_file_pool will not be initialized and we should not try to
operate on it.
Type: fix
Change-Id: Iaea15a23f7efd5b17fab13e6c1cbb3a9a34080e0
Signed-off-by: Benoît Ganne <bganne@cisco.com>
(cherry picked from commit a58be82dda89d6496f92e451b42eee31f0cf47b4)
cxgbe PMD initializes its control channel as part of dev_configure(),
and trying to get link status prior to it will lead to a crash.
DPDK documentation loosely hints that we should not call any device
function before dev_start(), call link_state() only for the relevant
PMDs.
From DPDK API documentation:
The functions exported by the application Ethernet API to setup a device
designated by its port identifier must be invoked in the following
order:
rte_eth_dev_configure()
rte_eth_tx_queue_setup()
rte_eth_rx_queue_setup()
rte_eth_dev_start()
Then, the network application can invoke, in any order, the functions
exported by the Ethernet API to get the MAC address of a given device,
to get the speed and the status of a device physical link, to
receive/transmit [burst of] packets, and so on.
Type: fix
Change-Id: I12d2ab4d84e6bd72a9f695447e86f3222929c804
Signed-off-by: Benoît Ganne <bganne@cisco.com>
(cherry picked from commit 31eb471d0cb0105ab74ee637028f4ab3cc00cf2a)
Calling ethernet_set_flags() to switch interface to/from promiscuous
mode must use use hw_if_index instead of sw_if_index.
Type: fix
Signed-off-by: John Lo <loj@cisco.com>
Change-Id: I72da286b913893227e32193ee11fbbc56e04804d
(cherry picked from commit 5b960c60f61c937d0f862be8a7573922b616de75)
Fix a couple endian conversions for displaying Marker Protocol packet
in the trace
Type: fix
Signed-off-by: Steven Luong <sluong@cisco.com>
Change-Id: I746a67fb6143b5ad52bc4af9604ff8760dbdec9b
(cherry picked from commit 9a244b0a29b3ed517fc3442c9358d79907f67a24)
While https://gerrit.fd.io/r/c/vpp/+/26948 fixed avoid using -1 to
index into h->free_lists[b][l] by changing the loop counter, the
check for the value of the loop counter (l < 0) cannot be trusted
to decide whether we've found a large enough object within the bin
or not. When the loop is terminated, the value of the variable l
could be ambiguous if it equals to 0 and it is never less than 0,
ie, when we bail out of the loop, we don't know if it was due to the
breaking out of the condition in
if ((s = f_size - size) >= 0)
break;
or
while (l > 0);
The fix is to explicitly set a variable when we have found a large enough
object inside the loop to be used to test whether the loop was prematurely
terminated (found == 1) or the loop just ran exhausted (found == 0)
Type: fix
Signed-off-by: Steven Luong <sluong@cisco.com>
Change-Id: I0161813fbd44dcba8982a767eac2e0930e9d77e3
(cherry picked from commit a5436ae2516edc955f26c6aa4103f5946ee8653c)
In search_free_list(), we have this do while loop.
do
{
l--;
f_index = h->free_lists[b][l];
f = elt_at (h, f_index);
f_size = heap_elt_size (v, f);
if ((s = f_size - size) >= 0)
break;
}
while (l >= 0);
When (l == 0), we still go back up to execute l--. Then l become -1. The
next statement is we index h->free_lists[b][-1]. After that, elt_at() would
probably cause a crash in the ASSERT.
Type: fix
Ticket: VPPSUPP-63
Signed-off-by: Steven Luong <sluong@cisco.com>
Change-Id: I617d122aa221cfdfe38f8be50f4e0f0e76e11bb5
(cherry picked from commit ec7012e51edef4aec2239cb5b3a249f46d9b2cb0)
When using vppcom_session* apis to setup TCP sessions in applications build outside of the VPP repository, it is necessary to set the worker_index explicitly when these apis are called from the none-VCL worker threads. An example is when data is to be sent to the TCP session that is originated from a different thread, like the main program thread or from the bin api thread. This change allows the application to set it.
Type: fix
Signed-off-by: IJsbrand Wijnands <ice@cisco.com>
Change-Id: I37f3654a49ea9a8cf3a0d3d0e672583018c12299
(cherry picked from commit 6017ff0dd7a27c062d0ad4687bfc70a69747ac55)
The path to VPP source might contain a '+' when building it
with Yocto/OpenEmbedded.
Type: fix
Signed-off-by: Ruslan Babayev <ruslan@babayev.com>
Change-Id: I205ac0de7d8726724af0e30f5b199391e05dc615
(cherry picked from commit 7f286f720d6fe2115423212dda6af66dd810691d)
In hopes of restoring his +2 button...
Type: fix
Signed-off-by: Dave Barach <dave@barachs.net>
Change-Id: I2600daab5afa4334713695d1074706fbb287832f
(cherry picked from commit e891ac2f198e7c00dceb2f2c6510f9bdf1cb91d1)
vlib_free_simple_counter()
vlib_free_combined_counter()
Frees the name and two dimensional vector from the stats segment.
Type: fix
Signed-off-by: Ole Troan <ot@cisco.com>
Change-Id: If1becf7d09520ba41a3d59e2df94958ecfcf6948
(cherry picked from commit a568a19b2956ed8b94b11c2ef041412473dc8442)
vxlan_gpe_init() is already defined in libvnet. When loading ioam plugin
we end up having 2 different objects using the same symbol.
ASan in GCC-10 started to enforce the One-Definition-Rule and it seems
like good hygiene anyway.
Type: fix
Change-Id: I2ea9af1821bca6482a290742e9a109fc25692f37
Signed-off-by: Benoît Ganne <bganne@cisco.com>
(cherry picked from commit 83ceffcd980494c6146ca67a0fa709b2c37ef13e)
When use the kv->v.memory_owner_thread_index as the index to get the
reass in pool, maybe this element is freed by the owner thread because
of timeout, too many fragments, and so on.
So we should check if do_handoff with kv->v.memory_owner_thread_index
before get the reass from pool.
Type: fix
Signed-off-by: Gao Feng <davidfgao@tencent.com>
Change-Id: Ie0f1dc368f86d0fd65292ca0c5e1908348015e09
(cherry picked from commit 9165e0365cc21575fd3e4a98be59317a839553f4)
To allow the use of WARN_ON/OFF macros to selectively disable build
warnings.
Type: fix
Change-Id: Iceb9d28b2b80c373afb51900880c23041be836db
Signed-off-by: Benoît Ganne <bganne@cisco.com>
(cherry picked from commit be7dbbbfdd49fcfff851f38d1d36d08fc9710604)
Type: fix
Use the up parameter in vnet_netlink_set_link_state(). It was
ignoring the parameter and always setting IFF_UP on an interface.
Change-Id: I0d44406d982afbdc43bc6b26d0f22c0bdd47abdc
Signed-off-by: Matthew Smith <mgsmith@netgate.com>
(cherry picked from commit 81284163a293759bc5c2d6a124639c6796589d15)
Minor change to vec_sort_with_function(...): don't depend on the qsort
implementation to deal with null, zero-long, or 1-long vectors
Type: fix
Signed-off-by: Dave Barach <dave@barachs.net>
Change-Id: I7bd7b0421673d2a025363089562aa7c6266fba66
(cherry picked from commit f593b5792031b3797cdcdfd3fbb33ac4de8c9a5d)
Type: fix
if the ,api/.json specifies that a enum should be u8/u16 that the
generated c enum needs to be packed.
Signed-off-by: Neale Ranns <nranns@cisco.com>
Change-Id: Ia0497b45e4c510a5c63cd02e966769bf20686838
(cherry picked from commit b5c0d35f9445d4d99f2c5c7bd3175e68721a8ee5)
Add Benoit Ganne to the committer list, remove committers who have
resigned, list committers in alphabetical order.
Type: fix
Signed-off-by: Dave Barach <dave@barachs.net>
Change-Id: Ic51092df774464e228cd875acf118827e9cd1923
(cherry picked from commit 0e2751cc1d246145cee6b1e4a588c30270c7ce21)
Extending the fib_index_to_table_index could leave entries uninitialized,
pointing to the session tables at index 0. That session index exists by
default, but it is a IPv4 session table. That would break all IPv6 on
the unitilized fib indexes.
Type: fix
Change-Id: Ie3f0a87a7f829ceb39f75ec06658b0ad1d3813ae
Signed-off-by: Andreas Schultz <andreas.schultz@travelping.com>
(cherry picked from commit 30a28c187b0eb9216d5d7918712d98a4b7a5ba6a)
Make sure we disconnect from vlib prior to free-ing the last worker, as
we'll need to access it.
Type: fix
Change-Id: Id5bdd17f0f5efa1ce52021b4270eb4f1e95cc61d
Signed-off-by: Benoît Ganne <bganne@cisco.com>
(cherry picked from commit 38ab5672b599df8ef201ca6733c9b008c37fdfa3)
bts can be freed by the call to bt_fix_overlapped(). Save flags for
later use.
Type: fix
Change-Id: If8b48c96ce39e38f2ed7f4db2815122523eb2e05
Signed-off-by: Benoît Ganne <bganne@cisco.com>
(cherry picked from commit a04adbf5368f9ec907508ff36d42fbd72d287120)
vl_api_address_t uses a packed enum for the address family, compare
a->af directly with ADDRESS_IP4 / ADDRESS_IP6 instead of running a->af
through clib_host_to_net_u32(...) before compare.
Indirectly fixes api_ip_route_add_del(...) w/ count > 1.
Type: fix
Signed-off-by: Dave Barach <dave@barachs.net>
Change-Id: Ib7f562ec9e92ee63e52a338d318fcf1ce6221755
(cherry picked from commit 54582663ab7d7105bc2407036a311d68707e5ab9)
Adapt queue_hi_thresh value using num_threads to avoid risk of deadlock
between threads which could happen for example when different NAT
threads try to handoff work to each other at the same time when their
frame queues are congested. This change ensures that each thread can
reserve a queue entry without causing problems even in the most extreme
case when all threads attempt to add to the same queue simultaneously
when the queue is nearly full.
Type: fix
Signed-off-by: Elias Rudberg <elias.rudberg@bahnhof.net>
Change-Id: I9e02f753bd00833d8dd500d181b0d4f9a454d703
(cherry picked from commit 368104d06ad6d667a8cce152426916fc654b6627)
