In bond RX quad loop, when all packets within the frame have the same incoming
interface, we cannot skip calling bond_update_next because that function calls
vnet_feature_next() to update the b->current_config_index. The next node needs
the correct b->current_config_index to work with.
Type: fix
Signed-off-by: Steven Luong <sluong@cisco.com>
Change-Id: I3d8b3d4e0f95490f406fae7638f0c43c301ce664
(cherry picked from commit 71e5b4710258376873c62428cb4a81b2a650fc26)
Allow for setting the maximum number of generated packets to be included
in the frame passed to next nodes. This is very important for testing
code which may be susceptible to multi-frame vs single-frame bugs (e.g.,
code that is doing re-ordering where packets may be buffered between
frames).
Update:
- remove redundant packet "rate" option.
- reduce n_max_frame to u32 as that's what pulled from the CLI.
Type: feature
Signed-off-by: Christian E. Hopps <chopps@chopps.org>
Change-Id: Ie362bbb110b2cf01d9f65c559bbe9101e17b7fdc
Signed-off-by: Christian Hopps <chopps@labn.net>
(cherry picked from commit 87d7bac5cf2ebdc7820e1edaadc2cc3b6d111cf2)
If no Linux PCI driver module is loaded, then the driver_name in the PCI
info struct is NULL. This can triggers crash when checking driver name
eg. in vlib_pci_device_open().
Default to "<NONE>" as driver name, which should never match.
Type: fix
Change-Id: I9e69889a7566467bd8220b92bbbaa72ada957257
Signed-off-by: Benoît Ganne <bganne@cisco.com>
(cherry picked from commit 0eae2bb1f1199f7dcb6a8c62b1ea612ed9ee4ae1)
In a rare event, after the vhost protocol message exchange has finished and
the interface had been brought up successfully, the driver MAY still change
its mind about the memory regions by sending new memory maps via
SET_MEM_TABLE. Upon processing SET_MEM_TABLE, VPP invalidates the old memory
regions and the descriptor tables. But it does not re-compute the new
descriptor tables based on the new memory maps. Since VPP does not have the
descriptor tables, it does not read the packets from the vring.
In the normal working case, after SET_MEM_TABLE, the driver follows up with
SET_VRING_ADDRESS which VPP computes the descriptor tables.
The fix is to stash away the descriptor table addresses from
SET_VRING_ADDRESS. Re-compute the new descriptor tables when processing
SET_MEM_TABLE if descriptor table addresses are known.
Type: fix
Ticket: VPP-1784
Signed-off-by: Steven Luong <sluong@cisco.com>
Change-Id: I3361f14c3a0372b8d07943eb6aa4b3a3f10708f9
(cherry picked from commit 61b8ba69f7a9540ed00576504528ce439f0286f5)
gid_ip4_table_t's and gid_ip6_table_t's are allocated from pools. They
MUST NOT be listed on the clib_all_bihash list to avoid dangling
references.
Switch to the clib_bihash_init2 API, which has the required knob.
Type: fix
Ticket: VPP-1788
Signed-off-by: Dave Barach <dave@barachs.net>
Change-Id: I49a17e937922c3af2e1c46b24e20883af51584a8
There is no bt->samples for this test, do not use it.
Type: fix
Change-Id: I2090290887bc5c0b5cdb0561cf2bf72a87781089
Signed-off-by: Benoît Ganne <bganne@cisco.com>
(cherry picked from commit b0a7c484eec9a813751e6e3fa71a9955ad5f0f74)
ACL tests use random port number in the tests.
A port number 6081 causes the decode in scapy
to consume some of the Raw payload into GENEVE
encoding, which breaks the test.
Solution: bring up the lower range of random
port to 16384, so that it does not touch any
of the well known ports.
Type: test
Change-Id: I022660d8ec147857924b436f1871b0b5ddcf4c47
Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
(cherry picked from commit ec574ff9129a7cc4282916d2a989e88d78aaff60)
- set msgid to 0 not random.
- allow for no DH in ESP child SA
Ticket: VPP-1781
Type: fix
Signed-off-by: Christian E. Hopps <chopps@chopps.org>
Change-Id: Ibe26009d38f444eeaec5b042097f145d161c7672
(cherry picked from commit 0e182c5b1d27139764dca7059c9c91be8387977a)
Make sure to reinitialize data before free-ing it.
Type: fix
Change-Id: I45727c456d0345204d4825ecdd9690c5ebeb5e94
Signed-off-by: Benoît Ganne <bganne@cisco.com>
(cherry picked from commit d4aeb84c3f066b755b723163da292eab95bd1ef9)
Type: fix
The scenario is touch of a dpdk source file in places like
<TOP>/build-root/build-vpp-native/external/dpdk-19.08/. The subsequent
build will trigger an rm -rf $(PACKAGE_INSTALL_DIR) by
build-root/Makefile at around line 709. Because the package in
question, "external", consists of various "sub" packages, all of which
are controlled with files like .quicly.install.ok located in
build-root/build-vpp[_debug]-native/external, we end up not handling the
.*.install.ok files to reflect the removal of that PACKAGE_INSTALL_DIR.
This fix will correct that, at least for the case of touching/changing
dpdk files. A better long term solution would be to change the "sub"
packages to be full fledged build system packages, as Dave Barach points
out.
Signed-off-by: Burt Silverman <burtms@gmail.com>
Change-Id: Ia94ccaa2795cbf354b5921c3001a7141313b66be
(cherry picked from commit 839a7bce3872f992f4807ee6d6a76f9b361151dc)
Define CLIB_PAUSE () to generate the "yield" instruction. No significant
performance changes were observed for clib_spinlock_t and clib_rwlock_t.
Type: feature
Change-Id: I59eb996e61c7a16007517e57e6996567302c1657
Signed-off-by: Jason Zhang <jason.zhang2@arm.com>
Reviewed-by: Lijian Zhang <Lijian.Zhang@arm.com>
(cherry picked from commit 18512b002da5da312aa2638b67a8ec4bb2c10236)
Type: feature
Based on the configuration, we can disable checksum offload capability
and calculate checksum while pushing the TCP & IP header.
This saves some cycles when VPP stack is used in legacy hardware devices.
Signed-off-by: Srikanth A <srakula@cisco.com>
Change-Id: Ic1b3fcf3040917e47ee65263694ebf7437ac5668
TX queues must be created before RX queues on Mellanox cards in order to
not receive our own broadcast packets.
Type: fix
Change-Id: I32ae25a47d819f715feda621a5ecddcf4efd71ba
Signed-off-by: Benoît Ganne <bganne@cisco.com>
(cherry picked from commit df213385d391f21d99eaeaf066f0130a20f7ccde)
The rdma driver use the pci subsystem, make sure the dependency is
recorded.
Type: fix
Change-Id: Ibd613f623d355612881acc31b9423f2de13793a3
Signed-off-by: Benoît Ganne <bganne@cisco.com>
(cherry picked from commit 4a98388daec998a56cb150e2acb8a26ae51c0c28)
When deleting interface from the API, 'hi' gets removed before
'h->sw_if_index' is copied.
Type: fix
Change-Id: I8e10108e9bdf95ab2fe002790d98262d583ca58c
Signed-off-by: Benoît Ganne <bganne@cisco.com>
(cherry picked from commit 8133c780a22480496c74a4ead321e8350d5beeb4)
Missing an increment in the while loop. Hashes not stored in the array.
Type: fix
Signed-off-by: Steven Luong <sluong@cisco.com>
Change-Id: I603027f5a7305478f48a102ac8035ffde9102c53
(cherry picked from commit 0471cdbd3fe04a88a8b70b5f0eff0c378e19abf7)
Use '%v' format for non-NULL terminated vectors instead of '%s'.
Type: fix
Change-Id: Id83de52486ad8dad3cdf3f32dad63a223fc1fdf7
Signed-off-by: Benoît Ganne <bganne@cisco.com>
(cherry picked from commit bb5ff4e4bb6dbf679a49fc9786718ad6fe229e84)
Type: test
Signed-off-by: Dave Wallace <dwallacelf@gmail.com>
Change-Id: I3122b038f7d77c7e5e8ee7c24046da6c94ca2d2c
(cherry picked from commit 83c1e9a35b41c3bc871a2508f847e64528efccac)
- ip{4,6}_reass_finalize() frees the reassembly context: do not access
it after the call.
- traces access reassembly context: free it after and not before
tracing.
Type: fix
Change-Id: Ia3aaea9c7b74932e249e013be04b9bd7298fd187
Signed-off-by: Benoît Ganne <bganne@cisco.com>
(cherry picked from commit 2d0ebd7ebc555565868038a09d80a61f5de29430)
