This reverts commit a5ee900fb75201bbfceaf13c8bc57a13ed094988.
Some of the unit tests breaks. Backing out until fixed.
Change-Id: I1846fb417db44a2a772f7b59cda8bcfe6d39f8c3
Signed-off-by: Ole Troan <ot@cisco.com>
As well as a rewrite of the encoders/decoders to make it more readable and extensible.
Change-Id: I253369ac76303922bf9c11377622c8974fa92f19
Signed-off-by: Ole Troan <ot@cisco.com>
An x550 with SFP+ interfaces attached to some switches can
have problems bringing the port up.
After configuring the link, there is a wait for 500 ms for
the link to come up. Some switches don't bring their ports up
that quickly. So the link is never observed to come up and is
reconfigured again the next time dpdk_update_link_state() is
called. Subsequent attempts time out also indefinitely.
Instead of waiting through 5 iterations of a 100 ms delay, wait
through 10 iterations. The i40e PMD does this when updating
link status.
This issue & patch will be reported to Intel so this or
some better solution can be applied upstream in the future.
Change-Id: I16d706a2790e51d695edc43c0ca17f1eff1dcf5e
Signed-off-by: Matthew Smith <mgsmith@netgate.com>
The commit 4bc1796b346efd10f3fb19b176ff089179263a24 had incorrect
calculation of the session lists minimal timeout, resulting
in returned value of 0 which resulted in existing sessions
constantly requeued, taking up the CPU. Fix this calculation.
Change-Id: I9a789739f96a1f01522c68f91b0a02db2417837f
Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
Having two pieces of code - one for now much simpler to recreate L3 info,
one for a more difficult do build L4/pkt metadata allows more
degrees of freedom for optimizations.
Also, construct the metadata in local variables first before
saving it into the memory structure, this fewer memory stores
and they are better aligned, allowing to coalesce with
subsequent reads if needed.
Change-Id: Icb35d933834b14294f875362c9b58db3feb38d99
Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
stats { interval <no> socket-name <name> | default }
Where the default socket is in /run/vpp/stats.sock
Change-Id: Idd501b328c662804d4ccd58034b0ea6b8aa1f89a
Signed-off-by: Ole Troan <ot@cisco.com>
Put error counters under node_index.
/err/<node-name>/<error-name>
E.g:
/err/ip4-lookup/Hash table collisions
/err/ip6-rewrite/Buffer allocation error
Error names are not globally unique, and this allows
for walking all errors for a particular node.
Put interface counters under the directory /if.
E.g. /if/rx
Put system counters under the directory /sys.
E.g. /sys/vector_rate
Change-Id: I5b794d16698f61bcb2063a8cd77a7c4ae36419b8
Signed-off-by: Ole Troan <ot@cisco.com>
- missing RSV bit set in descriptor
- wrong buffer offset
Change-Id: I8b138266652a30a50e4541c6344e4fe3dec4d1ca
Signed-off-by: Damjan Marion <damarion@cisco.com>
- Generate client DUID only when DHCPv6 PD feature is enabled
- Change client DUID type from DUID-LLT to DUID-LL
- Fix coverity warnings
Change-Id: I20e518fc9a1c5f3f7ea9add7e7e03a487c99e978
Signed-off-by: Juraj Sloboda <jsloboda@cisco.com>
To enable NAT plugin endpoint dependent mode add following to statrup config:
nat { endpoint-dependent }
Enable endpoint dependent filtering and mapping for all sessions.
Move some existing functionality such as service load balancing, twice nat,
out2in-only static mappings and unknown protocol dynamic translations, which
use endpoint dependent lookup hash tables before. Basically split to vanilla
NAT44 and extra features NAT44.
Change-Id: I3925eb5ddcc8f1ec4cf6af4e2a618a7ec7aa9735
Signed-off-by: Matus Fabian <matfabia@cisco.com>
When a client subscribed to receive events disconnects
from the API, while deleting their subscription, a hash
lookup was being performed against a pointer that did
not refer to a hash, resulting in a SEGV.
Perform the hash lookup against the correct hash.
Change-Id: I011d7479e2c3b9ee50721cf7499385c3ff7f704a
Signed-off-by: Matthew Smith <mgsmith@netgate.com>
It should be possible to use vlib without the vlibmemory library, etc.
Change-Id: Ic2316b93d7dbb728fb4ff42a3ca8b0d747c9425e
Signed-off-by: Dave Barach <dave@barachs.net>
Use similar approach as in the clib_bihash_search_inline_with_hash to
be able to do the hash calculation and lookup separately.
Change-Id: Ief79aa0f9f1e42b0af88be4807ca01fac30a80d7
Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
Add a command "acl_add_replace_from_file" to VAT which can load a ruleset and
add an ACL with it. There are a few options which augment the ACL being created:
"permit+reflect" or "permit" alter the default action from deny on the ACEs
created.
"append-default-permit" adds an entry in the end with the "permit+reflect"
if the default action has been changed to permit+reflect, or with a simple
permit otherwise.
This command is IPv4-only because the available datasets were IPv4-only.
Change-Id: I26b9f33ecb6b59e051d1d9cbafedbc47e8203392
Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
Add a new kv_16_8 field into 5tuple union, rename
the existing kv into kv_40_8 for clarity, and
add the compile-time alignment constraints.
Change-Id: I9bfca91f34850a5c89cba590fbfe9b865e63ef94
Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
It'll be interesting to see what the perf trend job
says about this change.
Change-Id: I66307a19a865011ac9660108098874fa1481c895
Signed-off-by: Dave Barach <dave@barachs.net>
Seems to have minimal-to-zero performance consequences. Data appears
accurate: result match the debug CLI output. Checked at low rates, 27
MPPS sprayed across two worker threads.
Change-Id: I09ede5150b88a91547feeee448a2854997613004
Signed-off-by: Dave Barach <dave@barachs.net>
Using ip46_address_t was convenient from operational point of view but created
some difficulties dealing with IPv4 addresses - the extra 3x of u32 padding
are costly, and the "holes" mean we can not use the smaller key-value
data structures for the lookup.
This commit changes the 5tuple layout for the IPv4 case, such that
the src/dst addresses directly precede the L4 information.
That will allow to treat the same data within 40x8 key-value
structure as a 16x8 key-value structure starting with 24 byte offset.
Change-Id: Ifea8d266ca0b9c931d44440bf6dc62446c1a83ec
Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
- On 'restart' close all registered files (except stdio) so that the
new process has a clean start; in particular, CLI sockets, API
sockets, tun/af_packet etc descriptors all need to close so they're
not left open but unused by the new VPP process. To do this we iterate
all the files registered for the polling mechanism and close() them.[1]
- While we're here, retain the original environment on 'restart';
several things make use of it.
[1] An alternative mechanism would be to mark all files with CLOEXEC
on opening; I think that is a little fragile for this fairly esoteric
use case.
Change-Id: I81b4e261c4d3c4e2948981231be899824dd4e69f
Signed-off-by: Chris Luke <chrisy@flirble.org>
Fixes clang error: equality comparison with extraneous parentheses
Changing all the #defines to inlines.
Change-Id: I30a931679ac3325b23b249b1ae28c7c8cf54b012
Signed-off-by: Sirshak Das<sirshak.das@arm.com>
ip4 vxlan cli/api (using flow infra) to create flows and enable them on
different hardware (currently tested with i40e)
to offload a vxlan tunnel onto hw:
set flow-offload vxlan hw TwentyFiveGigabitEthernet3/0/0 rx vxlan_tunnel1
to remove offload:
set flow-offload vxlan hw TwentyFiveGigabitEthernet3/0/0 rx vxlan_tunnel1 del
TODO:ipv6 handling
Change-Id: I70e61f792ef8e3f007d03d7df70e97ea4725b101
Signed-off-by: Eyal Bari <ebari@cisco.com>
- Cleanup session state after last ack and avoid using a cleanup timer.
- Change session cleanup to free the session as opposed to waiting for
delete notify.
- When in close-wait, postpone sending the fin on close until all
outstanding data has been sent.
- Don't flush rx fifo unless in closed state
Change-Id: Ic2a4f0d5568b65c83f4b55b6c469a7b24b947f39
Signed-off-by: Florin Coras <fcoras@cisco.com>
Since the main thread is not used for session polling anymore, when vpp
is started with multiple wokers, allocate connections on the first. Also
add a simple udp make test.
Change-Id: Id869f5d89e0fced51048f0384fa86a5022258b7c
Signed-off-by: Florin Coras <fcoras@cisco.com>
This patch separates setting of hardware interfaec and software
interface MTU. Software MTU is L2 payload MTU (i.e. not including L2
header). Per-protocol MTU for IPv4, IPv6 and MPLS can also be set.
Currently only IP4, IP6 are enabled in adjacency / rewrite code.
Documentation in src/vnet/MTU.md
Change-Id: Iee2fd6f0bbc8210748dd8e073ab9fab87d323690
Signed-off-by: Ole Troan <ot@cisco.com>
some IGMP hashse use only a u32 key, which is not stored in the object, so don't use memory based hash
Change-Id: Iaa4eddf568ea0164bc2a812da4cc502f1811b93c
Signed-off-by: Neale Ranns <nranns@cisco.com>
- CLI history forward-search is bound to ^S which is common, but
that is also the tty's default control byte to pause output.
So we disable XON/XOFF in the tty so that we can use ^S.
Change-Id: I61717c77a11733d64eed7f8119677e7cd2e20029
Signed-off-by: Chris Luke <chrisy@flirble.org>
- Terminals do not reverse-line-wrap when the cursor is at the left
edge and \b tries to make it go left.
- Instead, we have to track the cursor position if we need to emit \b's
and if we are at the left edge emit an ANSI sequence to relocate
the cursor. Previously we usually simply calculated the new cursor
position after a bunch of output had completed.
- Further trickiness is required since most xterm-like terminals also
defer moving the cursor to the next line when at the right edge[1], and
then if they receive a \b move the cursor back one character too many.
- This requires intricate reworking of everywhere that \b is emitted
by the CLI code during command line editing.
[1] Bash counters this issue by tracking the cursor position as output
is generated and forcing the cursor to the next line (by emitting
a space followed by \r) if it gets to this phantom cursor position);
here we effectively do that but only if the user tries to go left
when in this state.
Change-Id: I7c1d7c0e24c53111a5810cebb504ccfdac743086
Signed-off-by: Chris Luke <chrisy@flirble.org>
- The last line in the pager buffer was sometimes missed when
using space/pg-dn; simple off-by-one error.
Change-Id: Id4e5f7cf0e5db4f719f87b9069d75427bc66d3f7
Signed-off-by: Chris Luke <chrisy@flirble.org>
It should be OK to scrape dispatch stats without forcing a barrier
sync. Scrape the stats manually. We'll see what happens.
Change-Id: Ia20b51ea12ed81cce76e1801401bad0edd0645bb
Signed-off-by: Dave Barach <dave@barachs.net>
