Add a counter incremented upon the ACL check,
so it is easier to see which kind of traffic
is being checked by the policy, add the corresponding
output to the debug CLI "show acl-plugin tables" command.
Change-Id: Id811dddf204e63eeceabfcc509e3e9c5aae1dbc8
Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
This patch adds supprot support for multiple numa-aware physmem regions.
Change-Id: I5c69a6f4da33c8ee21bdb8604d52fd2886f2327e
Signed-off-by: Damjan Marion <damarion@cisco.com>
platforms to default to lib (instead of lib64) when not explicitely defining
the --libdir through the configure script.
This patch fixes that.
Change-Id: Ia4c152e0f40acab7f098885d672ff9385f57b0fe
Signed-off-by: Marco Varlese <marco.varlese@suse.com>
When I type in set interface rx-mode with a nonexistent queue, I got a crash with the following
traceback. It looks like the vm is NULL when vlib_node_get_runtime is called.
DBGvpp# sh int rx
Thread 0 (vpp_main):
node dpdk-input:
TenGigabitEthernet5/0/0 queue 0 (polling)
TenGigabitEthernet5/0/1 queue 0 (polling)
TenGigabitEthernet7/0/0 queue 0 (polling)
TenGigabitEthernet7/0/1 queue 0 (polling)
node vhost-user-input:
VirtualEthernet0/0/2 queue 0 (adaptive)
DBGvpp# set interface rx-mode VirtualEthernet0/0/2 queue 1 polling
Thread 1 "vpp_main" received signal SIGSEGV, Segmentation fault.
0x00007ffff6d4e0bc in vlib_node_get_runtime (vm=0x0, node_index=125)
at /home/sluong/vpp/build-data/../src/vlib/node_funcs.h:92
92 vlib_node_t *n = vec_elt (nm->nodes, node_index);
(gdb) where
at /home/sluong/vpp/build-data/../src/vlib/node_funcs.h:92
at /home/sluong/vpp/build-data/../src/vlib/node_funcs.h:112
vnm=0x6f0fa0 <vnet_main>, hw_if_index=7, queue_id=1, mode=0x7fffb62099e8)
at /home/sluong/vpp/build-data/../src/vnet/devices/devices.c:307
hw_if_index=7, queue_id=1, mode=VNET_HW_INTERFACE_RX_MODE_POLLING)
at /home/sluong/vpp/build-data/../src/vnet/interface_cli.c:1192
vm=0x7ffff7b9d440 <vlib_global_main>, input=0x7fffb6209ef0,
cmd=0x7fffb61d5d14)
at /home/sluong/vpp/build-data/../src/vnet/interface_cli.c:1288
vm=0x7ffff7b9d440 <vlib_global_main>,
cm=0x7ffff7b9d630 <vlib_global_main+496>, input=0x7fffb6209ef0,
parent_command_index=18)
at /home/sluong/vpp/build-data/../src/vlib/cli.c:588
vm=0x7ffff7b9d440 <vlib_global_main>,
cm=0x7ffff7b9d630 <vlib_global_main+496>, input=0x7fffb6209ef0,
parent_command_index=12)
The fix is to add a check for vec_len(hw->input_node_thread_index_by_queue)
and vec_len (hw->rx_mode_by_queue) to reject the command if the queue_id is
out of bound. While at it, I notice inputting queue_id=-1 is being interpreted
as all queues. An easy fix is to not overload the queue_id variable with -1 to
mean something else.
Change-Id: Id70ec3e7d06ccc67635e6d28ef53420bdac4a988
Signed-off-by: Steven <sluong@cisco.com>
It seems a useful abstraction for the purposes of writing
fine-grained tests, to be able to create a "connection" object
which would be bound to two VPP interfaces, and hold some
information about the state, allowing to send the packets
back and forth with minimal amount of arguments.
Change-Id: Idb83b6b82b38bded5b7e1756a41bb2df4cd58e3a
Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
- update of CSIT operational branch to be used for VPP-patch test
Change-Id: I23c6b5cb9bab6e295ff145531eabc2d51df49a94
Signed-off-by: Jan Gelety <jgelety@cisco.com>
Multiple portranges that land on the same hash key will always report the match
on the first portrange - even when the subsequent portranges have matched.
Test escape, so make a corresponding test case and fix the code so it passes.
(the commit on stable/1707 has erroneously mentioned VPP-938 jira ticket)
Change-Id: Idbeb8a122252ead2468f5f9dbaf72cf0e8bb78f1
Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
(cherry picked from commit fb088f0a201270e949469c915c529d75ad13353e)
Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
Change the rebuilding of worker thread clone datastructures
to run in parallel on the workers, instead of serially
on main.
Change-Id: Ib76bcfbef1e51f2399972090f4057be7aaa84e08
Signed-off-by: Colin Tregenza Dancer <ctd@metaswitch.com>
An external (to VPP) process can register (over the VPP binary API) to
receive control plane packets over a UNIX domain socket. The packets are
prepended with a packet descriptor containing meta-data (if_index of
interface, etc).
Currently only UDP is supported.
The socket supports sending of packets/frames as well.
The sent packet is prepended with a descriptor, telling VPP to
route the packet (via ip4-lookup, ip6-lookup) or as an pre-formed
Ethernet frame that is sent directly to interface-output.
The intended use case for this is for an external DHCP client or
a RIP implementation.
New configuration option:
punt { socket <socket path> }
To register use the punt_socket API message.
TODO:
- Add support for pre-routing. I.e send L3 packet to given
TX interface, but do ARP/ND (ip[46]-rewrite)
- Add test scripts
- Support for abstract names (starting with \0)
- Add rate limiting (COP)
- Support for other protocols, e.g. IPv6 ND
Change-Id: I4a0afc8020deebb3d9d74686dde694ee5bcb8d0f
Signed-off-by: Ole Troan <ot@cisco.com>
1. Limit MAC entry update per l2-learn call to reduce update burst
when wall clock advance to the the next minute so all MAC time
stamps are behind current time needing update.
2. Optimize l2-learn node fast path code sequence.
3. Invalidate cache_key when update MAC entry.
4. Change L2 learn hit counter to L2 learn hit-update counter.
5. Increase L2FIB table memory size to 512MB to fit 4M entries
6. Set MAC learn limit at 4M entries
Change-Id: I3075ee8fb59645a56850126bac2e3e6d341cef4d
Signed-off-by: John Lo <loj@cisco.com>
vpp_uses_dpdk is set to "no" in build-data/platforms/vpp.mk causing the
build to fail.
This patch addresses that issue.
Change-Id: Icc1aaa508e730c9b8715119e1259e4c82f974048
Signed-off-by: Marco Varlese <marco.varlese@suse.com>
Simply call pool_init_fixed(...) before using the pool. Note that
fixed, preallocated pools live in individually-mmap'ed address
segments, except for the free element bitmap. A large fixed pool can
exceed 4gb.
Fix tcp buffer allocator leak, remove broken assert
Change-Id: I4421082e12a77c41c6e20f7747f3150dcd01fc26
Signed-off-by: Dave Barach <dave@barachs.net>
According to the spec, supporting interrupt mode from the driver is optional,
not a must. When interrupt mode is configured on the interface, we should
check to make sure that the driver didn't opt out for the kickfd support and
reject the configuration if it did.
Change-Id: I7d3dbaddde65458e1a6a802754a3768ae8685a0e
Signed-off-by: Steven <sluong@cisco.com>
Adding new dependency is not right solution to this problem.
This reverts commit e58c93b2764eb306d286531a2b920c6de080cb77.
Change-Id: I08f2af5cf9c26c4302b0dbaccebbb52f0614f80f
Signed-off-by: Damjan Marion <damarion@cisco.com>
Setting the bucket-level LRU cache size to zero removes the
bucket-level LRU cache code.
Change-Id: Idf2e63d0d508675e957366515863766f79a3479c
Signed-off-by: Dave Barach <dbarach@cisco.com>
replace $(echo "..." | bc) by `echo ... | bc` as they do not seem to
behave the same way.
Change-Id: Ib8f13f0c8213aaae89d65559427e01bc40f4e8d1
Signed-off-by: Gabriel Ganne <gabriel.ganne@enea.com>
First attempt to make internal buffer manager thread safe was not
succesfull, so trying again. This time with more testing.
Change-Id: I01b8385a9c26d233934a3339255ea4bd31c865ac
Signed-off-by: Damjan Marion <damarion@cisco.com>
In the data path, we grab qsz from vhost_user_vring_t to compute
qsz_mask and store it in a stack variable to use on many occasions.
We never use qsz for any meaningful purpose. It is more useful to
cache qsz_mask in vhost_user_vring_t to avoid the needless computation
in the data path.
Change-Id: Idf4d94a9754d5c75c899f1f4f59602275b9904a6
Signed-off-by: Steven <sluong@cisco.com>
