Type: improvement
Currently, once an adjacency is stacked on a FIB entry via
adj_midchain_delegate_stack(), "midchain delegate" is created for the
adjacency and the FIB index is stored there. And all further calls to
adj_midchain_delegate_stack() even passing another FIB index will cause
the function to still use the stored one. In other words, there is
currently no way to stack an adjacency on another FIB index if "midchain
delegate" already exists for it.
Being able to stack on another FIB index is needed for the wireguard
plugin. As per the protocol, peers can roam between different external
endpoints. When an authenticated packet is received and it was sent from
a different endpoint than currently stored, the endpoint needs to be
updated and all futher communication needs to happen with that endpoint.
Thus, the corresponding to that peer adjacencies need to be stacked on
the FIB entry that corresponds to the new endpoint.
With this change, add adj_midchain_delegate_remove() that removes
"midchain delegate". When stacking on another FIB entry is needed,
existing "midchain delegate" can be removed and then, a new one created
with a new FIB index via adj_midchain_delegate_stack().
Signed-off-by: Alexander Chernavin <achernavin@netgate.com>
Change-Id: Ibc1c99b248a5ef8ef64867f39f494fab627a1741
Type: refactor
- refactored VPP test code to remove "ignore_path" variable
from "discover_tests" function and "run_test" code
- configured VPP test makefile, config file, and 'run.sh' shell script
to move "venv" directory from "test" dir to "build-root" dir
Signed-off-by: Saima Yunus <yunus.saima.234@gmail.com>
Change-Id: Id2beecbb99f24ce13ed118a1869c5adbef247e50
In several NAT submodules, the number of available ports (0xffff - 1024)
may not be divisible by the number of workers, so port_per_thread is
determined by integer division, which is the floor of the quotient.
Later when a worker index is needed, dividing the port with port_per_thread
may yield an out-of-bound array index into the workers array.
As an example, assume 2 workers are configured, then port_per_thread
will be (0xffff - 1024) / 2, which is 32255. When we compute a worker
index with port 0xffff, we get (0xffff - 1024) / 32255, which is 2,
but since we only have 2 workers, only 0 and 1 are valid indices.
This patch fixes the problem by adding a modulo at the end of the division.
Type: fix
Signed-off-by: Jing Peng <pj.hades@gmail.com>
Change-Id: Ieae3d5faf716410422610484a68222f1c957f3f8
we need cancel vrrp_vr_timer when deleting vrrp vr
Type: fix
Signed-off-by: luoyaozu <luoyaozu@chinatelecom.cn>
Change-Id: I8ea01f1943d6e3e60c4990c5be945de613bc8b53
- the cnxk code fails to link using the gcc-11 toolchain
included in the ARM64 Ubuntu-22.04 distro. This is required
for Ubuntu-22.04 CI jobs (both docker image building & CI
job execution on ARM64)
- Currently unable to replicate this failure on the dpdk repo.
Type: fix
Change-Id: Ice44aef9f0f721b4c88ac78f92a14bda87dc80a6
Signed-off-by: Dave Wallace <dwallacelf@gmail.com>
Type: improvement
If a tun/L3 interface is paired with a multipoint tunnel interface,
pass packets arriving from the host to ip[46]-lookup instead of
cross-connecting them to the tunnel interface. Adjacencies are used
to drive the rewrite for Multipoint tunnel interfaces, so the generic
adjacency used with a P2P tunnel will not work correctly.
Change-Id: I2d8be56dc5029760978c05bc4953f84c8924a412
Signed-off-by: Matthew Smith <mgsmith@netgate.com>
Type: fix
API and internal flags do not match 1:1.
Signed-off-by: Neale Ranns <neale@graphiant.com>
Change-Id: I0f4e53b2e071d1c9fffd1b97bf28b4789887b032
Type: improvement
This method allows the assignment of a severity to the error.
Signed-off-by: Neale Ranns <neale@graphiant.com>
Change-Id: Id1a414a88018390d03bd6b16bd048a98903bab5a
Type: feature
With this change, peers are able to roam between different external
endpoints. Successfully authenticated handshake or data packet that is
received from a new endpoint will cause the peer's endpoint to be
updated accordingly.
Signed-off-by: Alexander Chernavin <achernavin@netgate.com>
Change-Id: Ib4eb7dfa3403f3fb9e8bbe19ba6237c4960c764c
Type: feature
With this change, if being under load a handshake message with both
valid mac1 and mac2 is received, the peer will be rate limited. Cover
this with tests.
Signed-off-by: Alexander Chernavin <achernavin@netgate.com>
Change-Id: Id8d58bb293a7975c3d922c48b4948fd25e20af4b
This change implement a flavour of vlib_validate_buffer_enqueue_x1 with
aux data support
Change-Id: I2ecf7af49cf15ecd23b12d8acd57fe90546c1af7
Type: improvement
Signed-off-by: Mohammed Hawari <mohammed@hawari.fr>
Type: feature
With this change:
- if the number of received handshake messages exceeds the limit
calculated based on the peers number, under load state will activate;
- if being under load a handshake message with a valid mac1 is
received, but mac2 is invalid, a cookie reply will be sent.
Also, cover these with tests.
Signed-off-by: Alexander Chernavin <achernavin@netgate.com>
Change-Id: I3003570a9cf807cfb0b5145b89a085455c30e717
In set_hw_interface_change_rx_mode(), when vnet_hw_if_set_rx_queue_mode()
returns an error it actually returns success. This has been changed to
return a clib_error_return() value.
Type: fix
Change-Id: Iba39c875d9e15463cb6492d8a966234560a1f522
Signed-off-by: Wayne Morrison <wmorrison@netgate.com>
Type: improvement
This patches makes the make json-api-files
run in parallel in the same python runtime.
Default number of workers is 8, and run time
goes from ~20s to ~2s on average.
Change-Id: Id8cff013889db2671f6b6b4af9a019460c656f81
Signed-off-by: Nathan Skrzypczak <nathan.skrzypczak@gmail.com>
Use the script test/run.py to run a test named test_vm_tap
inside a QEMU VM. The run script builds out a virtual env,
launches a light weight QEMU VM, mounts host directories,
starts VPP inside the VM and runs the test. The test named
test_vm_tap, creates two tap v2 interfaces in separate Linux
namespaces and using iPerf, streams traffic between the VM
and VPP. All data files are stored in the directory named
/tmp/vpp-vm-tests. To clean up, use the make test-wipe
command.
Usage:
test/run.py --vm --debug --test test_vm_tap
Type: improvement
Change-Id: I4425dbef52acee1e5b8af5acaa169b89a2c0f171
Signed-off-by: Naveen Joy <najoy@cisco.com>
May cause pointers point to unexpected non-zero addresses if not
validate vec
Type: fix
Change-Id: Ie4d3343d6734125b98e0dc962e33e0c7514da829
Signed-off-by: GaoChX <chiso.gao@gmail.com>
Type: feature
Currently, if a handshake message is sent and a cookie message is
received in reply, the cookie message will be ignored. Thus, further
handshake messages will not have valid mac2 and handshake will not be
able to be completed.
With this change, process received cookie messages to be able to
calculate mac2 for further handshake messages sent. Cover this with
tests.
Signed-off-by: Alexander Chernavin <achernavin@netgate.com>
Change-Id: I6d51459778b7145be7077badec479b2aa85960b9
Type: fix
Receive router solicitation in pop vlan interface, it will cause copy mac address to wrong buffer current_data and can not reply the solicitation right
Signed-off-by: liangrq <liangrq@efly.cc>
Change-Id: Ic40a5a47a52c8187aaf6c6854df761529e6f24d9
format_base10 reads 64b but is fed 32b values at the callsite; change
to u64 consistently. The function has only one call site in
interface/monitor.c which has a few additional bugs (spurious
character, and ambiguous 'bits' versus 'bytes' in the output).
Type: improvement
Signed-off-by: Pim van Pelt <pim@ipng.nl>
Change-Id: I360f0d439cc13c09bd3f53db8184bd12ad4bc2e9
Type: fix
This patch fixes chain buffer support as transmit side
missing to set the flag to the descriptor in case of
chain buffers.
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
Change-Id: I73ff11be69a388f14fea39a19272d8eb76148fba
If an API methos is specified as "autoendian" it should use macros with
_END at the end.
Type: fix
Change-Id: I73b7b4f6996b30631c4355ace156ed0665c4b8ad
Signed-off-by: Stanislav Zaikin <zstaseg@gmail.com>
Sometimes VPP rejects application connection requests
due to various reasons. Some errors application can
retry to get a successful connection.
In a non-blocking session, VCL sends EPOLLHUP.
An application can call a new API
vppcom_session_get_error to find the details and retry
depending on the error.
Type: fix
Signed-off-by: Radha krishna Saragadam <krishna_srk2003@yahoo.com>
Change-Id: If0e21a8e25701f66a190a2799b2209e0c31f897c
namespace is a keyword for c++ compilers
Type: fix
Change-Id: Ia8fc9ef1cc15fe9d0e40b3f543f9e8f411203b89
Signed-off-by: Stanislav Zaikin <zstaseg@gmail.com>
This change adds loops per second in the stats segment.
Applications using the stats segment to monitor VPP
can use this for better monitoring
Type: fix
Signed-off-by: Radha krishna Saragadam <krishna_srk2003@yahoo.com>
Change-Id: I53081f40ee918eec9763513a639b9d8a02488b20
With thousands of UDP sessions,
Sometimes VPP needs more time to grab the MQ lock for a session.
So increased tries from 5 to 75.
Type: fix
Signed-off-by: Radha krishna Saragadam <krishna_srk2003@yahoo.com>
Change-Id: Id8b877255aedcdcf206e9d0869fe5246645d76e7
Type: fix
A user had trouble compiling C++ code to work with the linux-cp APIs
because some messages contain a field called namespace, which is a
reserved word for C++. We wish to rename those fields so the messages
which are affected are being set to in_progress.
Change-Id: I3bd1dc898c146a9980161a562b2b453313bb58fd
Signed-off-by: Matthew Smith <mgsmith@netgate.com>
Build vpp with MLX DPDK PMD,
make DPDK_MLX4_PMD=y DPDK_MLX5_PMD=y DPDK_MLX5_COMMON_PMD=y build-release
With no-multi-seg in startup.conf,
Mellanox NIC init failed with following message,
rte_eth_rx_queue_setup[port:2, errno:-12]: Unknown error -12
mlx5_net: port 2 Rx queue 0: Scatter offload is not configured and
no enough mbuf space(2176) to contain the maximum RX packet length(2065)
with head-room(128)
In Mellanox NIC PMD driver, 'di.max_rx_pktlen' is returned as 65536,
and 'di.max_mtu' is returned as 65535, which makes
the driver_frame_overhead logic not suitable for Mellanox NICs.
So skip the logic code if MAX_MTU is returned as 65535.
Type: fix
Fixes: 1cd0e5dd53 ("vnet: distinguish between max_frame_size and MTU")
Signed-off-by: Tianyu Li <tianyu.li@arm.com>
Change-Id: I027b76b8d07fb453015b8eebb36d160b4bc8df9c
This patch introduces set of python tests for fast path ipv6, based on
ipv4 tests. Some missing parts of ipsec framework has been added
in order to test ipv6 implementation.
Type: feature
Signed-off-by: Piotr Bronowski <piotrx.bronowski@intel.com>
Change-Id: Icc13322787d76485c08106bad2cb071947ad9846
With this patch fast path for ipv6 policy lookup is enabled.
This impelentation scales and outperforms original implementation when
the number of defined flows is higher thatn 100k.
Type: feature
Signed-off-by: Piotr Bronowski <piotrx.bronowski@intel.com>
Change-Id: I9364b5b8db4fc708790d48c538add272c7cea400
