We should be sending LACP PDU every second if the partner has LACP_TIMEOUT flag
set which means it will time us out in 3 seconds.
Add interface name for lacp trace
Change-Id: If7d816c062d03e80cc0dd7d10dba0b76ace0664a
Signed-off-by: Steven <sluong@cisco.com>
When creating an IPsec tunnel interface, allow a numeric
identifier to be set for use in the interface's name in
place of the dev instance. Default to using the dev instance
if no value is explicitly set.
When an IPsec tunnel is deleted, the interface is deleted
now instead of being kept in a pool of available hw
interfaces. Otherwise there was the possibility of
conflicting tx node names between deleted tunnels and
newly created ones.
Change-Id: Ic525466622a0dec38a845fa5871c084f6d9da380
Signed-off-by: Matthew Smith <mgsmith@netgate.com>
When enabled then Twice-NAT is applied only when
source IP equals destination IP after DNAT
Change-Id: I58a9d1d222b2a10c83eafffb2107f32c1b4aa3a8
Signed-off-by: Juraj Sloboda <jsloboda@cisco.com>
- use of vlib_log for non-dataplane logging
- redirect of dpdk logs trough unix pipe into vlib_log
- "show dpdk physmem" cli
Change-Id: I5da70f9c130273072a8cc80d169df31fc216b2c2
Signed-off-by: Damjan Marion <damarion@cisco.com>
hard code the address mask offsets. This are protocol specific and only used on ethernet when used at all.
Change-Id: Ib1f6f33682f53254ffbb5a241a1583e65420e0c7
Signed-off-by: Neale Ranns <nranns@cisco.com>
- adds session layer support for datagram based protocols
- updates udp to work in pure connectionless and datagram mode. The
existing connected mode is now 'accessible' for apps as a dummy UDPC,
as in, connected udp, protocol.
- updates udp_echo, echo client, echo server code to work in datagram
mode.
Change-Id: I2960c0d2d246cb166005f545794ec31fe0d546dd
Signed-off-by: Florin Coras <fcoras@cisco.com>
https://gerrit.fd.io/r/#/c/7701/ accidentally removed 3 lines of code in
dpdk/device/init.c which were added by https://gerrit.fd.io/r/#/c/7826/
case VNET_DPDK_PMD_VHOST_ETHER:
xd->port_type = VNET_DPDK_PORT_TYPE_VHOST_ETHER;
break;
Those lines were needed to recognize vhost-user interface which is created
via vdev command in dpdk and display VhostEthernet. Without them,
UnknownEthernet is displayed.
Change-Id: I6d7ee6aecc6a415fbb7308595d515649475bcd5f
Signed-off-by: Steven <sluong@cisco.com>
IP header is set as data + sizeof(ethernet_header_t),
what does not need to be true. The solution is to use
l3_hdr_offset.
Change-Id: I5d9f41599ba8d8eb14ce2d9d523f82ea6e0fd10d
Signed-off-by: Szymon Sliwa <szs@semihalf.com>
A poor man's flow switching or policy based rounting.
An ACL is used to match packets and is associated with a [set of] forwarding paths
that determine how to forward matched packets - collectively this association is a
'policy'.
Policies are then 'attached', in a priority order, to an interface when thaey are
encountered as an input feature. If a packet matches no policies it is forwarded
normally in the IP FIB.
This commit is used to test the "ACL-as-a-service" functionality,
which currently compiles, and the existing traffic ACL tests pass in both hash and linear modes.
Change-Id: I0b274ec9f2e645352fa898b43eb54c457e195964
Signed-off-by: Neale Ranns <nranns@cisco.com>
Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
Signed-off-by: Ole Troan <ot@cisco.com>
show vhost-user <interface> may cause a crash if interface is semi-bogus.
Semi-bogus means it is a known vpp interface which has a hw_if_index, but
it is bogus because it is not a vhost-user interface.
The fix is to add a check to reject non vhost-user interface for the
command.
Change-Id: I63f1e8bfbf46f5ec4c30f9fb3546982b63cd7cc5
Signed-off-by: Steven <sluong@cisco.com>
It is a relatively rarely used low level command for code that didn't change,
but due to infra changes it did not survive. Having it working may be very
useful for corner-case debugging. So, fix it for working with
the acl-as-a-service infra.
Change-Id: I11b60e0c78591cc340b043ec240f0311ea1eb2f9
Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
(cherry picked from commit 18bde8a579)
Removed clang build from main verify since that will be driven
in a seperate job going forward
Change-Id: I6efcad0b99fcc6babc4a7eb1475c99816f2cf175
Signed-off-by: Ed Kern <ejk@cisco.com>
Add API support similar to VPP CLI "ip probe-neighbor" except API
call is asynch and will not wait, as the CLI does, for address
resolution of probed neighbor. The API client can use the APIs
want_ip4_arp_events or want_ip6_nd_events to get notified of the
desired address resolution event.
Change-Id: Ieab58abe75b5cc7f5185b3b91418b6362f8992d3
Signed-off-by: John Lo <loj@cisco.com>
The vhost binary APIs for add/delete/dump interface were available long ago.
But no unit tests were ever added in make test. This patch is to retrofit
the missing unit tests.
Change-Id: I489521b5ae359a1168ac5880a1f13a5f7e93ce4a
Signed-off-by: Steven <sluong@cisco.com>
This reverts commit 70083ee74c.
Reverting as this patch is causing following crash:
0: /home/damarion/cisco/vpp3/build-data/../src/vnet/devices/devices.h:131 (vnet_get_device_input_thread_index) assertion `queue_id < vec_len (hw->input_node_thread_index_by_queue)' fails
Aborted
Change-Id: Ie2a365032110b1f67be7a9d832885b9899813d39
Signed-off-by: Damjan Marion <damarion@cisco.com>
In process of extracting the matching out of the ACL plugin internals,
a couple of pieces setting the miscellaneout fields in the 5tuple structure
did not make it, so they are initialized to zeroes. Move the assignments
to the right place to make both traffic acls and acl-as-a-service working.
Change-Id: I66a7540a13b05113b599f0541999a18fad60385d
Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
(cherry picked from commit d3b96ef0d7)
update the GBP plugin to implement the full NAT feature set of opflex agent
Change-Id: Ic06a039c889445ed0b9087fa1f292634192b0f8d
Signed-off-by: Neale Ranns <neale.ranns@cisco.com>
In dpdk based bonding, when the bond interface is configured for l2,
it automatically sets the bond interface to promiscuous mode and sets rx
redirect to ethernet-input. This allows traffic to be bridged to
non compute node facing interface when it is received from the compute
node interface.
For native vpp bonding, we need to do similar things. When the bond interface
is configured for l2, we set the slave interfaces to promiscuous mode
and set rx redirect to ethernet-input because dpdk does not know anything
about the bond interface. Likewise, when a new interface is enslaved, we also
need to do the same thing if the bond interface has already been configured
for l2.
Change-Id: I7e168008e8a4221be74929b2a20e6db0ce8f3110
Signed-off-by: Steven <sluong@cisco.com>
exception in vpp_api.vac_write():
"TypeError: initializer for ctype 'char *' must be a bytes or list or
tuple, not str"
Change-Id: Ib6bcfb86e6e36c557174979a110113af689c6754
Signed-off-by: Andrey "Zed" Zaikin <zed.0xff@gmail.com>
