Type: fix
the hash walk does not give the same guarantees as the bihash so
walk in a safe manner.
Change-Id: Idfe48c3a84ab3a341d887f7d196bc81ba34ae8b0
Signed-off-by: Neale Ranns <nranns@cisco.com>
(cherry picked from commit 22391fa92b95ee0376eb372450d6315523c8a9ae)
Fix and optimize DMAC check in ethernet-input node to utilize NIC or
driver which support L3 DMAC-filtering mode so that DMAC check can be
bypassed safely for interfaces/sub-interfaces in L3 mode.
Checking of interface in L3-DMAC-filtering state to avoid DMAC check
require the following:
a) Fix interface driver init sequence for devices which supports L3
DMAC-filtering to indicate its capability and initialize interface
to L3 DMAC-filtering state.
b) Fix ethernet_set_flags() function and its associated callback
flags_change() functions registered by various drivers in interface
infra to provide proper L3 DMAC filtering status.
Maintain interface/sub-interface L3 config count so DMAC checks can be
bypassed if L3 forwarding is not setup on any main/sub-interfaces.
Type: fix
Ticket: VPP-1868
Signed-off-by: John Lo <loj@cisco.com>
Change-Id: I204d90459c13e9e486cfcba4e64e3d479bc9f2ae
(cherry picked from commit 4a302ee7c75f3d4fd1a73a9d1f6c34b3bde8d620)
Looks like MAP_LOCK is not enough, so call mlock(...) instead....
Type: fix
Change-Id: I1bc668a2bf3c861ca1c2d376c0fb6bfea87d4f48
Signed-off-by: Damjan Marion <damarion@cisco.com>
Type: fix
adding routes should be MP safe. When new prefixes with differrent
prefix lengths are added, adjust the sorted list in an MP safe way.
Change-Id: Ib73a3c84d01eb86d17f8e79ea2bd2505dd9afb3d
Signed-off-by: Neale Ranns <nranns@cisco.com>
Type: fix
we can probably do better, but for now this is needed
Signed-off-by: Neale Ranns <nranns@cisco.com>
Change-Id: I07161f5ac07a70a0e6db6608ba31659d9bc2c9ed
I had cleaned up the sample.md previously for 20.01, but when later
that was merged to master, the file was renamed. So, fix this issue.
Change-Id: I6347685af216901fbfdd445606735b9bf79f8fe5
Type: docs
Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
Type: fix
when the interpose is on an adj-fib and the cover is removed the adj
source will not install. this lead to no path list being found for the
interpose source and a crash. pick a drop path list in this case.
Signed-off-by: Neale Ranns <nranns@cisco.com>
Change-Id: Ied217da043926c913657080f5ffb151201225d23
Type: improvement
a bihash per-interface used too much memory.
Change-Id: I447bb66c0907e1632fa5d886a3600e518663c39e
Signed-off-by: Neale Ranns <nranns@cisco.com>
(cherry picked from commit 20aec3db441074ee5a861a40d6e02fad2f3dcb37)
Obserbed when VPP is running in k8s container
Type: fix
Change-Id: Ibbff9c3921bd7f4f97d47cb6f10eed8ed5efe269
Signed-off-by: Damjan Marion <damarion@cisco.com>
In case there is no free space in first buffer for ICV and footer,
additional buffer will be added, but esp_encrypt will stay in single
buffer mode.
The issue happens for the following payload sizes:
- TCP packets with payload 1992
- ICMP packets with payload 2004
This fix moves the single/chained buffer ops selection to after
esp_add_footer_and_icv call.
Type: fix
Signed-off-by: Fan Zhang <roy.fan.zhang@intel.com>
Signed-off-by: PiotrX Kleski <piotrx.kleski@intel.com>
Change-Id: Ic5ceba418f738933f96edb3e489ca2d149033b79
(cherry picked from commit fdca4dd1a1a817e65bf44e435261d893fc0c51d6)
Document update to reflect merged SRv6 functions into 20.05 of lookup and forwarding for inner IP packet encapsulated with outer IP and GTP-U headers.
Type: docs
Signed-off-by: Satoru Matsushima <satoru.matsushima@gmail.com>
Change-Id: I85c9ddf6bf9fa63f2b8b6e03eff3ecec1e7615ab
Removing the comments around eid_type which seem to have been overlooked
by the original patch https://gerrit.fd.io/r/c/vpp/+/24663.
NOTE: This patch is a doc-only change. It does two things:
1. Remove comments around obsolete eid_type type
2. Update the comments to reflect the new vl_api_eid_t type
This is to ensure correct documentation is displayed to user/reader of
VPP docs in 20.05.
Type: fix
Signed-off-by: Onong Tayeng <otayeng@cisco.com>
Change-Id: I48e1993cf8869cb32e159d1956f3ec1e5943e33f
(cherry picked from commit 4ab5190eb4167ac4c06cd649ec8a860784ab1d41)
Swap byte order for fields of type vl_api_rx_mode_t.
Ticket: VPP-1871
Type: fix
Signed-off-by: Jakub Grajciar <jgrajcia@cisco.com>
Change-Id: Ia1745257b57209d41661d38067e0dd7618f9a9b9
Signed-off-by: Jakub Grajciar <jgrajcia@cisco.com>
(cherry picked from commit aefcd1a3579ec2c93f606b151d563d87ea211387)
When vcl_epoll_wait_handle_mq handles rx events exceeding maxevents, VPP will not signal because cursize > 0, and the remaining rx events cannot be triggered because the eventfd event has been read. Therefore, we should dequeue all events until cursize = 0. And then handle msg up to maxevents with vcl_epoll_wait_handle_mq_event and those beyond with vcl_handle_mq_event.
Type: fix
Ticket: VPP-1873
Signed-off-by: hanlin <hanlin_wang@163.com>
Change-Id: I8a0c87cb41c837deb8284b40f668cc3c7d9d6e56
Signed-off-by: hanlin <hanlin_wang@163.com>
(cherry picked from commit d0e646f6892e9c85278c9538760a8940c86dcdbb)
This patch adds an entry for the defaultbranch
in .gitreview
Type: docs
Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
Change-Id: I6f78398d6c7779b52d64ad65285c0194f0849996
Calling ethernet_set_flags() to switch interface to/from promiscuous
mode must use use hw_if_index instead of sw_if_index.
Type: fix
Signed-off-by: John Lo <loj@cisco.com>
Change-Id: I72da286b913893227e32193ee11fbbc56e04804d
This fixes a situation where long-lived inactive session blocks LRU
list. Solution is to have multiple LRU lists based on session type.
This helps because session timeout is same for all sessions of same
type.
Type: fix
Signed-off-by: Klement Sekera <ksekera@cisco.com>
Change-Id: I5e54b2aab73b23911d6518d42e8c3f166c69a38c
After VF reset, FDIR rule still takes effect. To solve the issue,
this patch adds to flush all flows before flow uninit. VIRTCHNL
sends message to PF by Admin Queue, so flow flush should be implemented
before Admin Queue shut down.
Type: fix
Signed-off-by: Chenmin Sun <chenmin.sun@intel.com>
Change-Id: I8ba0db7cd7646eaabd5745f74952016b0b968bbb
Type: fix
In quad loop, checksum will be calculated for all four packets,
if one packet needs checksum computation, without respecting their
respective flags. This patch fixes it.
Change-Id: I479b420ba0dcbd178ea4180bf05a0e55a6b13843
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
Type: fix
it is possible for a user to change the end node of a feature arc, but
this change should only apply to that 'instnace' of the arc, not all
arcs. for example, if a tunnel has its ipx-output end node changed to
adj-midchain-tx, this shouldn't affect all ipx-output arcs. obviously...
Signed-off-by: Neale Ranns <nranns@cisco.com>
Change-Id: I41daea7ba6907963e42140307d065c8bcfdcb585
Type: fix
Only add GSO and Checksum offload flags when gso is
enabled.
Change-Id: I58945a4ffbb9a0e6a8640fc01424c63feef16306
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
Type: feature
the es4-encrypt and esp6-encrypt nodes need to be siblings so they both have the same edges for the DPO on which the tunnel mode SA stacks.
Signed-off-by: Neale Ranns <nranns@cisco.com>
Change-Id: I2126589135a1df6c95ee14503dfde9ff406df60a
Fix a couple endian conversions for displaying Marker Protocol packet
in the trace
Type: fix
Signed-off-by: Steven Luong <sluong@cisco.com>
Change-Id: I746a67fb6143b5ad52bc4af9604ff8760dbdec9b
Avoids crash due to missing symbol, when build system detects toolchain
which is not able to produce binaries for all targets we need....
Type: fix
Change-Id: I77ee63cb8dca3c9e4e83a6235c60f1439a472444
Signed-off-by: Damjan Marion <damarion@cisco.com>
