Remove broken special case from l2_input.c:set_int_l2_mode(), which
turns out to confuse the graph dispatch engine.
The loopback TX function needs to push packets to either
ethernet-input or to l2-input, based on bridge / BVI
configuration. Rather than overloading a single graph arc - and making
vain attempts to reconfigure it - create both arcs and use the correct
one.
Rewrote the loopback tx function as an idosyncratic multi-arch
quad/single loop fn.
Change-Id: I15b56ce641d90a11e7b3c7d23859f40e168dd7b2
Signed-off-by: Dave Barach <dave@barachs.net>
For L2 ARP termination, use both brodcast ARP request and reply
packets to provide MAC/IP binding events.
For IP4/IP6 neighbor adress resolution, send resolution events
if there is an address resolution attemp with a static neighbor
entry where both IP and MAC matches. This allow probe of an IP
neighbor with a static entry to confirm it is responding with
a reply matching that of the static entry.
Change-Id: Iffb923bb5aea3f9021436735d5ca06e7b24f966f
Signed-off-by: John Lo <loj@cisco.com>
Add "show version cmdline" to display the command line
Add doxygen tags to the source code
Change-Id: I0205b373062fd88f176d9c8086d89d7784a5172f
Signed-off-by: Dave Barach <dave@barachs.net>
continue statement in case bypasses cleaning up of unserialized
node
Change-Id: I0103d31df2eed3ed04d7cdcdfb790f4d9a376336
Signed-off-by: Dave Cornejo <dcornejo@netgate.com>
When creating a new - as opposed to recycled - debug CLI process node,
perform a proper barrier sync and node runtime update. Otherwise, the
graph replicas diverge for some period of time. That's not immediately
fatal, but it's not a good idea, either.
When renaming a debug cli process node, fix all of the name-vector
replicas before freeing the [one-and-only] name vector.
This fixes the so-called stats segment node runtime scraper crash,
which tripped over a replicated dangling reference to the
recently-freed debug CLI node name.
Change-Id: Ieffabd9f003139e534b9d79b88370439907930e5
Signed-off-by: Dave Barach <dbarach@cisco.com>
Causes clang validation failures. The patch did not actually pass validation; unfortunately it received a +1 from fd.io JJB - presumably due to a race condition
This reverts commit 779c865cc6c7af5bb435d8b3465d80685370edb2.
Change-Id: Ica3697f8f90e67d3eae4debc597f27d7d512004a
Signed-off-by: Dave Barach <dbarach@cisco.com>
thanks to coverity... validate that the length of the packet on
wire matches the size of the header based on the number of groups
and sources. drop those that don't match.
Change-Id: Iab3f3a835f6a43d9c73c5d502ea5ceccdd6985b0
Signed-off-by: Neale Ranns <nranns@cisco.com>
Node serialization is turned off by default. To enable it do:
statseg {serialize-nodes on}
Change-Id: I53bba3cab517bd3ba90eba52d94b3ebb16870141
Signed-off-by: Florin Coras <fcoras@cisco.com>
This adds the directory sphinx and sphinx/docs
as well as two matching placeholder files. These
are being added now to facilitate some gerrit triggers
Change-Id: I0e6e7607c5ae5cdbf05718b95b1d299178544485
Signed-off-by: Ed Kern <ejk@cisco.com>
It is cheaper to get thread index from vlib_main_t if available...
Change-Id: I4582e160d06d9d7fccdc54271912f0635da79b50
Signed-off-by: Damjan Marion <damarion@cisco.com>
no_flood count was not updated on removal
might couase a negative insertion index when adding new members
Change-Id: I2caf2c453dfef1a9f16fb8fa2e5af42b4e653a69
Signed-off-by: Eyal Bari <ebari@cisco.com>
Add missing VALIDATE_SW_IF_INDEX macro / check.
Net of this fix, a spurious warning will probably recur. Coverity will
complain that sw_if_index is tainted. Please dismiss the warning.
Change-Id: Iec31ce1d86f742e197e63b0c5d474cd5e496ee5f
Signed-off-by: Dave Barach <dave@barachs.net>
Freeing the prefix and address vectors after signalling them from
dhcpv6_client_node_fn to either the pd or iana report processes is
absolutely wrong. The code has appeared to work by luck.
This took three full days' worth of expert effort to root cause - in
the context of an unrelated patch - and about one minute to fix.
Change-Id: Ie589ab1a70ae83441ab4e8b6618a6d405741f53f
Signed-off-by: Dave Barach <dave@barachs.net>
Increase batch size when recycling buffers. This increases Mpps by 7%.
Change-Id: I2a460611d9c36e9bf087b076fc4e187acf61108f
Signed-off-by: Brian Brooks <brian.brooks@arm.com>
- Enable/Disable an interface for IGMP
- improve logging
- refactor common code
- no orphaned timers
- IGMP state changes in main thread only
- Large groups split over multiple state-change reports
- SSM range configuration API.
- more tests
Change-Id: If5674f1044e7e97274a711f47807c9ba689d7b9a
Signed-off-by: Neale Ranns <nranns@cisco.com>
Errors occur when building a library outside the VPP
source tree that uses the shared memory API because
vnet/devices/pipe/pipe.api.h is not installed but is
included by vnet/vnet_all_api_h.h.
In src/vnet.am, Add vnet/devices/pipe/pipe.api.h to
nobase_include_HEADERS.
Change-Id: Id3dc28d90f41bb0ff576736f9d77bee19a2b8fdd
Signed-off-by: Matthew Smith <mgsmith@netgate.com>
When using a DPDK cryptodev with IPsec, sending outbound
packets results in a crash on division by zero if using an
algorithm not supported by the OpenSSL ESP nodes. This
includes AES-GCM and MD5.
At IPsec intf creation time, the next node at slot
IPSEC_OUTPUT_NEXT_ESP_ENCRYPT for ipsec_if_tx_node_fn is
set to the node named esp-encrypt. This is the OpenSSL
ESP encrypt function. If DPDK cryptodevs are configured,
dpdk-esp-encrypt is the correct next node.
Change to setting the next node according to the value in
ipsec_main.esp_encrypt_node_index. That value is set to
esp-encrypt by default. If DPDK cryptodevs are configured
it gets set to dpdk-esp-encrypt.
Change-Id: I83896c76b975d74aead247a162c85eccca9575a8
Signed-off-by: Matthew Smith <mgsmith@netgate.com>
Add patch for DPDK 18.05 that was previously applied
to DPDK 18.02.1. Issue with ixgbe on x550 SFP+ still
exists.
Bug report submitted to DPDK:
https://bugs.dpdk.org/show_bug.cgi?id=69
Change-Id: I9b005709ddf2a72192b1288ba8b4bac85bf12685
Signed-off-by: Matthew Smith <mgsmith@netgate.com>
It also refactors the vhost code which was in one big file vhost-user.c.
Receive side code is in vhost_user_input.c and
Transmit side code is in vhost_user_output.c
Change-Id: I1b539b5008685889723e228265786a2a3e9f3a78
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
A pipe resembles a unix pipe. Each end of the pipe is a full
VPP interface.
pipes can be used for e.g. packet recirculation, inter-BD, etc.
Change-Id: I185bb9fb43dd233ff45da63ac1b85ae2e1ceca16
Signed-off-by: Neale Ranns <neale.ranns@cisco.com>
* added the fib index into the key
* conform coding style for vxlan.h
* added "show vxlan tunnel raw" command to dump bihash
Change-Id: Icc96e41abb648e96de5b4605b035f68f9e20f8a9
Signed-off-by: Eyal Bari <ebari@cisco.com>
