This also removes old DPDK vhost-user code which doesn't help
much with DPDK 16.07 or newer.
Change-Id: Ic996df1eaccc33acd3fa6cabeaf7381a672c2a90
Signed-off-by: Damjan Marion <damarion@cisco.com>
Only add support for named variable-length-arrays as some api fo not
follow the expected order of length preceding the value.
Change-Id: I4c22c9b3c05f23edb3edc1cbc445be87b0a69162
Signed-off-by: Gabriel Ganne <gabriel.ganne@qosmos.com>
This is not needed anymore, likely because we use --whole-archive
parameter during linking.
Change-Id: Iab0f2ec647b63c59663faceacfbc60aa4a4b84a6
Signed-off-by: Damjan Marion <damarion@cisco.com>
Variable 'other' is no longer defined in equals method
of DTOs without defined fileds.
Fixes dead local store coverity issues.
Change-Id: I69eddf2b4b3f433149ff4d49e49c46515572d61a
Signed-off-by: Marek Gradzki <mgradzki@cisco.com>
Add support for special routes to send ICMP unreachable or admin prohibited.
Change-Id: Ia1ac65b0e5e925c0f9ebc7824141833b4e18f05e
Signed-off-by: Neale Ranns <nranns@cisco.com>
- update of CSIT operational branch to be used for VPP-patch test
Change-Id: Icb36e5a68f6c1ef5edbc5159f2af3d255cecbdeb
Signed-off-by: Jan <jgelety@cisco.com>
- synchronize AbstractFutureJvppInvoker.getRequests
- handle registry & jvpp close in API usage examples
Change-Id: I918bf864b8212fde04f0d9194037f1c6a810fc3f
Signed-off-by: Marek Gradzki <mgradzki@cisco.com>
This patch allows copiler to select which SIMD instructions
will be used for copying 16 and 32 byte block.
Immediate effect of this change will occur in avx2 variants of
graph node functions. So far 128 byte registers were used
even in code optimized for avx2 due to macro nature of
clib_memcpy. With this patch gcc should pick 256 byte registers
in such cases.
Change-Id: I3510ee9b3bf01f3f0a9184e1a3f8e1bd827f8eee
Signed-off-by: Damjan Marion <damarion@cisco.com>
Add shared memory APIs for MPLS routes and MPLS to IP prefix bindings.
Change-Id: I85b074a4dadc8249c410fdabd8ea019d20479cf8
Signed-off-by: Neale Ranns <neale.ranns@cisco.com>
When an interface is removed, and another one is created,
the nodes from the previous interface are reused. The current
code fails when the new interface type differs from the original.
It is necessary to update the node runtime, in particular the
node function, and the node format function.
Jira: VPP-460
Change-Id: I2fc3c609e0173a7f62597230768669039853ab03
Signed-off-by: Pierre Pfister <ppfister@cisco.com>
This patch modifies the load balancer hash table such that
it uses vector operations.
It also fixes the hash computation logic such that the port
is only looked-up for TCP and UDP.
Some additional work is still needed for other types of traffic.
Change-Id: I788b4c782a9923d3792f3985f0580c0c81b3aad3
Signed-off-by: Pierre Pfister <ppfister@cisco.com>
Note that the new way to provision MPLSoGRE is using the "normal"
GRE tunnel such as in the following example:
create gre tunnel src 10.0.3.1 dst 10.0.3.3
set in state gre0 up
set int ip addr gre0 10.0.4.1/30
set int mpls gre0 enable
ip route table 4 6.0.0.0/24 via 10.0.4.2 gre0 out-label 30
mpls local-label add 30 eos ip4-lookup-in-table 4
The previous CLIs/APIs used to configure MPLSoGRE tunnel such as
"create mpls gre tunnel...", "mpls encap|decap add label .." and
"show mpls tunnel", etc. can not be used. They will be deprecated
in a later update to the VPP code base.
Change-Id: I244916841924dc2b87d2143691cd8476716c06b1
Signed-off-by: John Lo <loj@cisco.com>
Fixed Coverity complaining about the clib_memcpy used in
/vnet/vnet/interface.c
Change-Id: I401f05aea1066d829abac1555021e1180b4a161e
Signed-off-by: Pavel Kotucek <pkotucek@cisco.com>
Change the adjacency completion model to pull not push.
A complete adjacency has a rewirte string, an incomplete one does not. the re-write string for a peer comes either from a discovery protocol (i.e. ARP/ND) or can be directly derived from the link type (i.e. GRE tunnels). Which method it is, is interface type specific.
For each packet type sent on a link to a peer there is a corresponding adjacency. For example, if there is a peer 10.0.0.1 on Eth0 and we need to send to it IPv4 and MPLS packets, there will be two adjacencies; one for the IPv4 and one for the MPLS packets. The adjacencies are thus distinguished by the packets the carry, this is known as the adjacency's 'link-type'. It is not an L3 packet type, since the adjacency can have a link type of Ethernet (for L2 over GRE).
The discovery protocols are not aware of all the link types required - only the FIB is. the FIB will create adjacencies as and when they are required, and it is thus then desirable to 'pull' from the discovery protocol the re-write required. The alternative (that we have now) is that the discovery protocol pushes (i.e. creates) adjacencies for each link type - this creates more adjacencies than we need.
To pull, FIB now requests from the interface-type to 'complete' the adjacency. The interface can then delegate to the discovery protocol (on ethernet links) or directly build the re-write (i.e on GRE).
Change-Id: I61451789ae03f26b1012d8d6524007b769b6c6ee
Signed-off-by: Neale Ranns <nranns@cisco.com>
Useful when attempting to serialize potentially very large data
structures and send them to API clients. NULL pointer checks are
MANDATORY when calling xxx_or_null(...) variant functions.
Change-Id: I6ae272deb7150a2c5aa82ec45a206e5bddee7a02
Signed-off-by: Dave Barach <dave@barachs.net>
QEMU 2.7 introduces reconnect support. However it doesn't send
last state of last_avail_idx in the SET_VRING_BASE.
With this patch we are overriding SET_VRING_BASE with value taken
from used->idx.
It is a bit hackish as it basically overrides SET_VRING_BASE
provided value but it should work in most of the cases.
This is what author of reconnect code is also suggesting in his post:
https://lists.gnu.org/archive/html/qemu-devel/2016-06/msg01495.html
Change-Id: I10e5f401c409d2989bf6c43eaea377800a9c76df
Signed-off-by: Damjan Marion <damarion@cisco.com>
