Fix generate-deb-changelog to handle YY.MM release

generate-deb-changelog was only properly handling x.y.z releases. This patch fixes it to handle YY.MM. Change-Id: Iaaee8ff747abd6754d021535c889f67ad2c9998f Signed-off-by: Ed Warnicke <eaw@cisco.com>
Fix double-enqueued packet in interface-output dual-loop, fixes VPP-116
2016-06-15 23:18:38 -05:00 · 2016-06-15 16:38:41 +02:00 · 2016-06-15 16:17:44 +02:00 · 2016-06-13 13:30:47 +01:00 · 2016-06-09 09:50:38 -04:00 · 2016-06-09 13:38:05 +00:00
5339 changed files with 307018 additions and 1350547 deletions
--- a/.clang-format
+++ b/.clang-format
@ -1,51 +0,0 @@
-# Minimal clang-format version is 11
-
-BasedOnStyle: GNU
-UseTab: Always
-SpaceAfterCStyleCast: true
-SortIncludes: false
-AlignConsecutiveMacros: true
-BreakBeforeTernaryOperators: false
-BreakBeforeBinaryOperators: None
-ContinuationIndentWidth: 2
-
-ForEachMacros:
-  - 'clib_bitmap_foreach'
-  - 'pool_foreach'
-  - 'pool_foreach_index'
-  - 'pool_foreach_pointer'
-  - 'vec_foreach'
-  - 'vec_foreach_backwards'
-  - 'vec_foreach_index'
-  - 'vec_foreach_index_backwards'
-  - 'vec_foreach_pointer'
-  - 'vlib_foreach_rx_tx'
-  - 'foreach_int'
-  - 'foreach_pointer'
-  - 'foreach_vlib_main'
-  - 'foreach_set_bit_index'
-  - 'foreach_vlib_frame_bitmap_set_bit_index'
-  - 'FOREACH_ARRAY_ELT'
-  - 'RTE_ETH_FOREACH_DEV'
-  - 'foreach_clib_stack_frame'
-  - 'foreach_vnet_dev_rx_queue_runtime'
-  - 'foreach_vnet_dev_counter'
-  - 'foreach_vnet_dev_port_rx_queue'
-  - 'foreach_vnet_dev_port_tx_queue'
-  - 'foreach_vnet_dev_port'
-  - 'foreach_vnet_dev_args'
-  - 'foreach_vnet_dev_port_args'
-  - 'foreach_clib_dt_tree_node'
-  - 'foreach_clib_dt_child_node'
-
-StatementMacros:
-  - 'CLIB_MULTIARCH_FN'
-  - 'VLIB_NODE_FN'
-  - 'VNET_DEV_NODE_FN'
-  - 'VNET_DEVICE_CLASS_TX_FN'
-  - '__clib_section'
-  - '__clib_aligned'
-
-WhitespaceSensitiveMacros:
-  - 'WARN_ON'
-  - 'WARN_OFF'
--- a/.clang-tidy
+++ b/.clang-tidy
@ -1,8 +0,0 @@
-Checks: "-*,\
-misc-*,\
-bugprone-*,\
-bugprone-reserved-identifier,\
-performance-*,\
-clang-analyzer-*,\
-clang-analyzer-valist.Uninitialized,\
-"
--- a/.git_commit_template.txt
+++ b/.git_commit_template.txt
@ -1,48 +0,0 @@
-# <feature-name>: <subject>
-# |<----  Using a maximum of 50 characters  ---->|
-#
-# Explain why this change is being made
-# |<----   Try to limit each line to a maximum of 72 characters   ---->|
-
-# Ticket: <JIRA #id>
-# Type: <type>
-# Fixes: <offending-git-commit-id>
-# Change-Id: <sha1>
-# Signed-off-by: <email>
-#
-#
-# --- COMMIT END ---
-#
-# Type can be
-#    feature     (new feature)
-#    fix         (bug fix)
-#    refactor    (refactoring production code)
-#    improvement (minor improvements in existing feature)
-#    style       (formatting, missing semi colons, etc; no code change)
-#    docs        (changes to documentation)
-#    test        (adding or refactoring tests; no production code change)
-#    make        (change the build process, or tools, or infrastructure)
-#
-# feature-name: Is the name of the VPP feature, plugin or directory.
-#               Commits across multiple components should be split.
-#               E.g. ip, fib, nat, acl, host, api
-#
-# Fixes: If type is fix refers to the original commit (optional).
-# Ticket: Refers to JIRA ticket if it exists (optional).
-#
-# --------------------
-# Remember to:
-#    Lowercase the subject line.
-#    Use the imperative mood in the subject line.
-#    Not end the subject line with a period.
-#    Separate subject from body with a blank line.
-#    Use the body to explain what and why vs. how.
-#    Use multiple lines with "-" for bullet points in body.
-# --------------------
-# Usage:
-#
-# The template is automatically added to the current repository by
-# make install-dep.
-# (git config commit.template .git_commit_template.txt)
-#
-# --------------------
--- a/.github/workflows/close_prs.yml
+++ b/.github/workflows/close_prs.yml
@ -1,21 +0,0 @@
---
-name: Close Pull Request
-
-on:
-  pull_request_target:
-    types: [opened]
-
-jobs:
-  run:
-    runs-on: ubuntu-latest
-    steps:
-    - uses: superbrothers/close-pull-request@v3
-      with:
-        # Optional. Post a issue comment just before closing a pull request.
-        comment: "Thank you so much for your interest!  VPP takes patches at https://gerrit.fd.io/
-
-```
-git clone https://gerrit.fd.io/r/vpp
-```
-
-Using [git review](https://www.mediawiki.org/wiki/Gerrit/git-review) to contribute patches is recommended"
--- a/.gitignore
+++ b/.gitignore
@ -1,5 +1,4 @@
 *~
-*.sw[op]

 /build-root/.ccache
 /build-root/build-*/
@ -8,53 +7,30 @@
 /build-root/dpdk-includes/
 /build-root/packages-vpp/
 /build-root/path_setup
-/build-root/deb/debian/vpp-plugins/
-/build-root/deb/.pybuild/
-/build-root/*.buildinfo
+/build-root/build-config.mk
 /build-root/*.deb
 /build-root/*.rpm
-/build-root/*.tar.xz
 /build-root/*.changes
-/build-root/rpmbuild/
-/build-root/test-coverage/
-/build-root/test/
 /build-config.mk
-/build/external/*.tar.gz
-/build/external/*.tar.xz
-/build/external/vpp-*
-/build/external/dpdk_mlx_default.sh
-/build/external/downloads/
-/build/external/deb/_build/
-/build/external/deb/debian/changelog
-/build/external/deb/debian/debhelper-build-stamp
-/build/external/deb/debian/tmp/
-/build/external/deb/debian/files/
-/build/external/deb/debian/.debhelper/
-/build/external/deb/debian/vpp-ext-deps*
-/build/optional/downloads/
-/build/optional/*.tar.gz
-/build/optional/*.tar.xz
-/build/optional/vpp-*
-/build/optional/deb/_build/
-/build/optional/deb/debian/changelog
-/build/optional/deb/debian/debhelper-build-stamp
-/build/optional/deb/debian/tmp/
-/build/optional/deb/debian/files/
-/build/optional/deb/debian/.debhelper/
-/build/optional/deb/debian/vpp-ext-deps*
+/vpp-api/python/vpp_papi/vpp_papi.py
+/dpdk/*.tar.gz
 /path_setup
 /tools/
 # start autotools ignore
 autom4te.cache/
 config/
+Makefile
 Makefile.in
 aclocal.m4
 app.info
 compile
+config.h
+config.h.in
 config.log
 config.guess
 config.sub
 config.status
+configure
 configure.scan
 coverage_report
 depcomp
@ -67,97 +43,20 @@ ltmain.sh
 ylwrap
 test-driver

+.cproject
 *.iml
-.deps.ok
+.bootstrap.ok
 .settings
-.autotools
 # stop autotools ignore

-# OSX and some IDE
+# OSX and some IDE 
 .DS_Store
 .idea/
 .project
-.cproject
-.pydevproject
-.vscode/
-cmake-build*/

 # cscope and ctags
 /cscope.*
 /tags
-ID
-TAGS
-# ggtags
-GPATH
-GRTAGS
-GTAGS
+
 # Generated documentation
 /build-root/docs
-/build-root/.doxygen-bootstrap.ok
-/build-root/.doxygen-siphon.dep
-/docs/venv
-
-# language servers
-compile_commands.json
-.clangd
-.cache
-
-# indent backup files
-*.BAK
-
-# Python bytecode
-*.pyc
-
-# Python api generator
-/src/vpp-api/python/build
-/src/vpp-api/python/dist
-/src/vpp-api/python/vpp_papi.egg-info
-/src/vpp_api/.tox
-/src/vpp_api/.stestr
-
-# vppctl command list
-/src/scripts/vppctl-cmd-list
-
-# No core files
-**/core
-
-# extra scripts config
-/extras/scripts/.config/
-
-# extras gomemif build files
-/extras/gomemif/bazel*
-
-# vpptop build files
-/extras/vpptop/build/*
-
-# debian packaging
-.pc
-
-# No test log files
-**/test-run-*-*-*
-
-# host stack test framework
-/extras/hs-test/vpp-data
-/extras/hs-test/hs-test
-/extras/hs-test/http_server
-/extras/hs-test/.build.ok
-/extras/hs-test/.build.cov.ok
-/extras/hs-test/.last_hst_ppid
-/extras/hs-test/.goimports.ok
-/extras/hs-test/summary/
-/extras/hs-test/.last_state_hash
-
-# ./configure
-/CMakeFiles
-/bin
-/lib
-/.ninja_deps
-/.ninja_log
-/.cmake
-/CMakeCache.txt
-/build.ninja
-/cmake_install.cmake
-/startup.conf
-/startup.vpp
-# log file archives
-/archives
--- a/.gitreview
+++ b/.gitreview
@ -2,3 +2,4 @@
 host=gerrit.fd.io
 port=29418
 project=vpp
+defaultbranch=stable/1606
--- a/INFO.yaml
+++ b/INFO.yaml
@ -1,105 +0,0 @@
---
-project: 'vpp'
-project_creation_date: '2015-12-08'
-project_category: ''
-lifecycle_state: 'Incubation'
-project_lead: &vpp_ptl
-    name: 'Damjan Marion'
-    email: 'dmarion@me.com'
-    id: 'dmarion'
-    company: 'cisco'
-    timezone: 'Europe/Zagreb'
-primary_contact: *vpp_ptl
-issue_tracking:
-    type: 'jira'
-    url: 'https://jira.fd.io/projects/vpp'
-    key: 'VPP'
-mailing_list:
-    type: 'groups.io'
-    url: 'https://lists.fd.io/g/vpp-dev'
-    tag: '<[sub-project_name]>'
-realtime_discussion:
-    type: 'irc'
-    server: 'freenode.net'
-    channel: 'fdio-vpp'
-meetings:
-    - type: 'zoom'
-      agenda: 'n/a'
-      url: 'https://wiki.fd.io/view/VPP/Meeting'
-      server: 'n/a'
-      channel: 'fdio-vpp'
-      repeats: 'weekly'
-      time: '08:00 PT'
-repositories:
-    - 'vpp'
-committers:
-    - <<: *vpp_ptl
-    - name: 'Dave Barach'
-      company: 'cisco'
-      email: 'openvpp@barachs.net'
-      id: 'dbarach'
-    - name: 'Florin Coras'
-      company: 'cisco'
-      email: 'florin.coras@gmail.com'
-      id: 'florin.coras'
-    - name: 'Benoit Ganne'
-      company: 'cisco'
-      email: 'bganne@cisco.com'
-      id: 'bganne'
-    - name: 'John Lo'
-      company: 'cisco'
-      email: 'loj@cisco.com'
-      id: 'lojohn'
-    - name: 'Chris Luke'
-      company: 'comcast'
-      email: 'chris_luke@comcast.com'
-      id: 'chrisluke'
-    - name: 'Neale Ranns'
-      company: 'cisco'
-      email: 'nranns@cisco.com'
-      id: 'nranns'
-    - name: 'Matthew Smith'
-      company: 'netgate'
-      email: 'mgsmith@netgate.com'
-      id: 'mgsmith'
-    - name: 'Ole Trøan'
-      company: 'employees'
-      email: 'otroan@employees.org'
-      id: 'otroan'
-    - name: 'Paul Vinciguerra'
-      company: 'vinciconsulting'
-      email: 'pvinci@vinciconsulting.com'
-      id: 'pvinci'
-    - name: 'Dave Wallace'
-      company: 'gmail'
-      email: 'dwallacelf@gmail.com'
-      id: 'dwallacelf'
-    - name: 'Ed Warnicke'
-      company: 'gmail'
-      email: 'hagbard@gmail.com'
-      id: 'hagbard'
-    - name: 'Andrew Yourtchenko'
-      company: 'cisco'
-      email: 'ayourtch@cisco.com'
-      id: 'ayourtch'
-    - name: 'Fan Zhang'
-      company: 'intel'
-      email: 'roy.fan.zhang@intel.com'
-      id: 'royzhang1980'
-    - name: 'Mohammed HAWARI'
-      company: 'cisco'
-      email: 'momohawari@gmail.com'
-      id: 'momohawari'
-tsc:
-    # yamllint disable rule:line-length
-    approval: 'https://wiki.fd.io/view/TSC/Meeting_Minutes'
-    changes:
-        - type: 'Promotion'
-          name: 'Damjan Marion'
-          link: 'https://lists.fd.io/g/vpp-dev/message/17521'
-        - type: 'Addition'
-          name: 'Fan Zhang'
-          link: 'https://lists.fd.io/g/vpp-dev/message/19068'
-        - type: 'Approval'
-          name: 'Mohammed HAWARI'
-          link: 'https://ircbot.wl.linuxfoundation.org/meetings/fdio-meeting/2023/fd_io_tsc/fdio-meeting-fd_io_tsc.2023-06-01-15.00.html'
--- a/899
+++ b/899
--- a/920
+++ b/920
--- a/README.md
+++ b/README.md
@ -1,7 +1,7 @@
 Vector Packet Processing
 ========================

-## Introduction
+## Introduction.

 The VPP platform is an extensible framework that provides out-of-the-box
 production quality switch/router functionality. It is the open source version
@ -16,37 +16,34 @@ For more information on VPP and its features please visit the
 [What is VPP?](https://wiki.fd.io/view/VPP/What_is_VPP%3F) pages.


-## Changes
+## Directory layout.

-Details of the changes leading up to this version of VPP can be found under
-doc/releasenotes.
+Directory name         | Description
+---------------------- | -------------------------------------------
+     build-data        | Build metadata
+     build-root        | Build output directory
+     doxygen           | Documentation generator configuration
+     dpdk              | DPDK patches and build infrastructure
+     g2                | Event log visualization tool
+     gmod              | perf related?
+     perftool          | Performance tool
+     sample-plugin     | A sample plugin
+@ref svm               | Shared virtual memory allocation library
+     test              | Unit tests
+@ref vlib              | VPP application library source
+@ref vlib-api          | VPP API library source
+@ref vnet              | VPP networking source
+@ref vpp               | VPP application source
+@ref vpp-api           | VPP application API source
+     vppapigen         | VPP API generator source
+     vpp-api-test      | VPP API test program source
+@ref vppinfra          | VPP core library source
+
+(If the page you are viewing is not generated by Doxygen then
+ignore any @@ref labels in the above table.)


-## Directory layout
-
-| Directory name         | Description                                 |
-| ---------------------- | ------------------------------------------- |
-| build-data             | Build metadata                              |
-| build-root             | Build output directory                      |
-| docs                   | Sphinx Documentation                        |
-| dpdk                   | DPDK patches and build infrastructure       |
-| extras/libmemif        | Client library for memif                    |
-| src/examples           | VPP example code                            |
-| src/plugins            | VPP bundled plugins directory               |
-| src/svm                | Shared virtual memory allocation library    |
-| src/tests              | Standalone tests (not part of test harness) |
-| src/vat                | VPP API test program                        |
-| src/vlib               | VPP application library                     |
-| src/vlibapi            | VPP API library                             |
-| src/vlibmemory         | VPP Memory management                       |
-| src/vnet               | VPP networking                              |
-| src/vpp                | VPP application                             |
-| src/vpp-api            | VPP application API bindings                |
-| src/vppinfra           | VPP core library                            |
-| src/vpp/api            | Not-yet-relocated API bindings              |
-| test                   | Unit tests and Python test harness          |
-
-## Getting started
+## Getting started.

 In general anyone interested in building, developing or running VPP should
 consult the [VPP wiki](https://wiki.fd.io/view/VPP) for more complete
@ -60,13 +57,13 @@ coverage of the topic.
 For the impatient, some salient information is distilled below.


-### Quick-start: On an existing Linux host
+### Quick-start: On an existing Linux host.

 To install system dependencies, build VPP and then install it, simply run the
 build script. This should be performed a non-privileged user with `sudo`
 access from the project base directory:

-    ./extras/vagrant/build.sh
+    ./build-root/vagrant/build.sh

 If you want a more fine-grained approach because you intend to do some
 development work, the `Makefile` in the root directory of the source tree
@ -76,9 +73,9 @@ interest. To see the available targets run:
    make


-### Quick-start: Vagrant
+### Quick-start: Vagrant.

-The directory `extras/vagrant` contains a `VagrantFile` and supporting
+The directory `build-root/vagrant` contains a `VagrantFile` and supporting
 scripts to bootstrap a working VPP inside a Vagrant-managed Virtual Machine.
 This VM can then be used to test concepts with VPP or as a development
 platform to extend VPP. Some obvious caveats apply when using a VM for VPP
@ -90,19 +87,8 @@ For this to work you will need a working installation of Vagrant. Instructions
 for this can be found [on the Setting up Vagrant wiki page]
 (https://wiki.fd.io/view/DEV/Setting_Up_Vagrant).

-### Quick-start: FreeBSD

-VPP is packaged in the FreeBSD ports system. Binary packages are available and
-can be installed with the following command:
-
-    # pkg install vpp
-
-
-## More information
-
-Several modules provide documentation, see @subpage user_doc for more
-end-user-oriented information. Also see @subpage dev_doc for developer notes.
+## More information.

 Visit the [VPP wiki](https://wiki.fd.io/view/VPP) for details on more
-advanced building strategies and other development notes.
-
+advanced building strategies and development notes.
--- a/build-data/packages/build.mk
+++ b/build-data/packages/build.mk
@ -1,12 +0,0 @@
-# Copyright (c) 2015 Cisco and/or its affiliates.
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at:
-#
-#     http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
--- a/build-data/packages/cavium-dpdk.mk
+++ b/build-data/packages/cavium-dpdk.mk
@ -0,0 +1,55 @@
+# Temporary until Cavium upstreams their work
+
+cavium-dpdk_configure =							\
+  src_dir=$(call find_source_fn,$(PACKAGE_SOURCE)) ;			\
+  dst_dir=$(PACKAGE_BUILD_DIR) ;					\
+  tar -C $${src_dir} -cf - . | tar -C $${dst_dir} -xf - ;		\
+  cd $${dst_dir} ;							\
+  : colossal hemorrhoid to configure headroom	;			\
+  if [ x$($(PACKAGE)_configure_args_$(PLATFORM)) = "x" ] ; then		\
+    HR=256 ;								\
+  else									\
+     dpdk_configure_args=$($(PACKAGE)_configure_args_$(PLATFORM)) ;	\
+     if [ $$dpdk_configure_args = "--with-headroom=256" ] ; then	\
+	HR=256 ;							\
+     elif [ $$dpdk_configure_args = "--with-headroom=384" ] ; then	\
+	HR=384 ;							\
+     else								\
+	HR=256 ;							\
+     fi ;								\
+  fi ;									\
+  env HR=$$HR								\
+     spp -o								\
+  $(PACKAGE_BUILD_DIR)/config/common_linuxapp				\
+  $(PACKAGE_BUILD_DIR)/config/common_linuxapp.spp			\
+	;								\
+  env $(CONFIGURE_ENV)							\
+    make config T=arm64-thunderx-linuxapp-gcc RTE_ARCH=arm64		\
+        CC=aarch64-thunderx-linux-gnu-gcc V=0				\
+        RTE_SDK=$(PACKAGE_BUILD_DIR)					\
+        RTE_TARGET=arm-default-linuxapp-gcc
+
+# Note: add e.g. "-O0" to EXTRA_CFLAGS if desired: EXTRA_CFLAGS='-g -O0'
+
+cavium-dpdk_make_args = install T=arm64-thunderx-linuxapp-gcc RTE_ARCH=arm64 \
+        CC=aarch64-thunderx-linux-gnu-gcc V=0				     \
+        RTE_SDK=$(PACKAGE_BUILD_DIR)					     \
+        RTE_TARGET=arm-default-linuxapp-gcc
+
+cavium-dpdk_install =						\
+  src_dir=$(PACKAGE_BUILD_DIR) ;				\
+  dst_dir=$(PACKAGE_INSTALL_DIR) ;				\
+  tar -h -C $${src_dir}/arm64-thunderx-linuxapp-gcc -cf - .	\
+    | tar -C $${dst_dir} -xf - 
+
+# dpdk libraries end up in .../lib not .../lib64. Fix it.
+cavium-dpdk_post_install =							\
+  if [ "$(arch_lib_dir)" != "lib" ] ; then					\
+     mkdir -p $(PACKAGE_INSTALL_DIR)/$(arch_lib_dir) ;				\
+     cd $(PACKAGE_INSTALL_DIR)/lib		     ;				\
+     tar cf - . | ( cd $(PACKAGE_INSTALL_DIR)/$(arch_lib_dir); tar xf - ) ;	\
+  fi 
+
+# nothing to install, all static libraries
+cavium-dpdk_image_include = echo
+
--- a/build-data/packages/dpdk.mk
+++ b/build-data/packages/dpdk.mk
@ -0,0 +1,24 @@
+
+DPDK_MARCH = $(strip $($(PLATFORM)_dpdk_arch))
+ifeq ($(DPDK_MARCH),)
+	DPDK_MARCH="native"
+endif
+
+ifneq (,$(findstring debug,$(TAG)))
+	DPDK_DEBUG=y
+else
+	DPDK_DEBUG=n
+endif
+
+DPDK_MAKE_ARGS = -C $(call find_source_fn,$(PACKAGE_SOURCE)) \
+	DPDK_BUILD_DIR=$(PACKAGE_BUILD_DIR) \
+	DPDK_INSTALL_DIR=$(PACKAGE_INSTALL_DIR) \
+	DPDK_MARCH=$(DPDK_MARCH) \
+	DPDK_DEBUG=$(DPDK_DEBUG)
+
+
+dpdk_configure = echo 
+
+dpdk_make_args = $(DPDK_MAKE_ARGS) config
+
+dpdk_install =  make $(DPDK_MAKE_ARGS) build
--- a/build-data/packages/external.mk
+++ b/build-data/packages/external.mk
@ -1,45 +0,0 @@
-# Copyright (c) 2015 Cisco and/or its affiliates.
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at:
-#
-#     http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-external_source = build
-
-ifneq (,$(findstring debug,$(TAG)))
-	DPDK_DEBUG=y
-else
-	DPDK_DEBUG=n
-endif
-
-DPDK_MAKE_ARGS = -C $(call find_source_fn,$(PACKAGE_SOURCE)) \
-	BUILD_DIR=$(PACKAGE_BUILD_DIR) \
-	INSTALL_DIR=$(PACKAGE_INSTALL_DIR) \
-	DPDK_DEBUG=$(DPDK_DEBUG)
-
-DPDK_MLX5_PMD=$(strip $($(PLATFORM)_uses_dpdk_mlx5_pmd))
-ifneq ($(DPDK_MLX5_PMD),)
-DPDK_MAKE_ARGS += DPDK_MLX5_PMD=y
-endif
-
-DPDK_MLX4_PMD=$(strip $($(PLATFORM)_uses_dpdk_mlx4_pmd))
-ifneq ($(DPDK_MLX4_PMD),)
-DPDK_MAKE_ARGS += DPDK_MLX4_PMD=y
-endif
-
-ifeq ("$(V)","1")
-DPDK_MAKE_ARGS += DPDK_VERBOSE=1
-endif
-
-external_configure = echo
-
-external_build = echo
-
-external_install =  $(MAKE) $(DPDK_MAKE_ARGS) -C external ebuild-build ebuild-install
--- a/build-data/packages/extras.mk
+++ b/build-data/packages/extras.mk
@ -1 +0,0 @@
-# empty file
--- a/build-data/packages/g2.mk
+++ b/build-data/packages/g2.mk
@ -0,0 +1,5 @@
+g2_configure_depend = vppinfra-install
+
+g2_CPPFLAGS = $(call installed_includes_fn, vppinfra)
+
+g2_LDFLAGS = $(call installed_libs_fn, vppinfra)
--- a/build-data/packages/gmod.mk
+++ b/build-data/packages/gmod.mk
@ -1,22 +1,9 @@
-# Copyright (c) 2015 Cisco and/or its affiliates.
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at:
-#
-#     http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-gmod_configure_depend = vpp-install
+gmod_configure_depend = vppinfra-install svm-install

 gmod_configure_args = --libdir=$(PACKAGE_INSTALL_DIR)/$(arch_lib_dir)/ganglia

-gmod_CPPFLAGS = $(call installed_includes_fn, vpp)
+gmod_CPPFLAGS = $(call installed_includes_fn, vppinfra svm)
 gmod_CPPFLAGS += -I/usr/include/apr-1.0 -I/usr/include/apr-1 -I/usr/include
-gmod_LDFLAGS = $(call installed_libs_fn, vpp)
+gmod_LDFLAGS = $(call installed_libs_fn, vppinfra svm)

 gmod_image_include = echo $(arch_lib_dir)/ganglia/libgmodvpp.so etc
--- a/build-data/packages/libmemif.mk
+++ b/build-data/packages/libmemif.mk
@ -1,35 +0,0 @@
-# Copyright (c) 2017-2018 Cisco and/or its affiliates.
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at:
-#
-#     http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-libmemif_source = extras
-libmemif_configure_subdir = libmemif
-
-ifneq ($(shell which cmake3),)
-CMAKE?=cmake3
-else
-CMAKE?=cmake
-endif
-
-libmemif_cmake_args ?=
-libmemif_cmake_args += -DCMAKE_INSTALL_PREFIX:PATH=$(PACKAGE_INSTALL_DIR)
-libmemif_cmake_args += -DCMAKE_C_FLAGS="$($(TAG)_TAG_CFLAGS)"
-libmemif_cmake_args += -DCMAKE_SHARED_LINKER_FLAGS="$($(TAG)_TAG_LDFLAGS)"
-libmemif_cmake_args += -DCMAKE_PREFIX_PATH:PATH="$(PACKAGE_INSTALL_DIR)/../vpp"
-
-libmemif_configure = \
-  cd $(PACKAGE_BUILD_DIR) && \
-  $(CMAKE) -G Ninja $(libmemif_cmake_args) $(call find_source_fn,$(PACKAGE_SOURCE))$(PACKAGE_SUBDIR)
-
-libmemif_build = $(CMAKE) --build $(PACKAGE_BUILD_DIR) -- $(MAKE_PARALLEL_FLAGS)
-
-libmemif_install = $(CMAKE) --build $(PACKAGE_BUILD_DIR) -- install
--- a/build-data/packages/perftool.mk
+++ b/build-data/packages/perftool.mk
@ -0,0 +1,5 @@
+perftool_configure_depend = vppinfra-install
+
+perftool_CPPFLAGS = $(call installed_includes_fn, vppinfra)
+
+perftool_LDFLAGS = $(call installed_libs_fn, vppinfra)
--- a/build-data/packages/sample-plugin.mk
+++ b/build-data/packages/sample-plugin.mk
@ -1,40 +1,47 @@
-# Copyright (c) 2015 Cisco and/or its affiliates.
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at:
-#
-#     http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
+sample-plugin_configure_depend =		\
+	vppinfra-install			\
+	svm-install				\
+	vlib-api-install			\
+	vlib-install				\
+	vnet-install				\
+	vpp-install				\
+	vpp-api-test-install

-sample-plugin_source = src
-sample-plugin_configure_subdir = examples/sample-plugin
-sample-plugin_configure_depend = vpp-install
-sample-plugin_CPPFLAGS = $(call installed_includes_fn, vpp)
-sample-plugin_LDFLAGS = $(call installed_libs_fn, vpp)
-sample-plugin_PATH = $(call package_install_dir_fn,vpp)/bin
+sample-plugin_CPPFLAGS = $(call installed_includes_fn,	\
+	vppinfra					\
+	openssl						\
+	svm						\
+	vlib						\
+	vlib-api					\
+	vnet						\
+	vpp						\
+        vpp-api-test)

-ifneq ($(shell which cmake3),)
-CMAKE?=cmake3
+sample-plugin_LDFLAGS = $(call installed_libs_fn,	\
+	vppinfra					\
+	openssl						\
+	svm						\
+	vlib						\
+	vlib-api					\
+	vnet						\
+	vpp						\
+	vpp-api-test)
+
+sample-plugin_post_install = \
+	mkdir -p $(PACKAGE_INSTALL_DIR)/$(arch_lib_dir)/vlib_plugins ; 	\
+	cp $(PACKAGE_INSTALL_DIR)/$(arch_lib_dir)/*.so 			\
+	  $(PACKAGE_INSTALL_DIR)/$(arch_lib_dir)/vlib_plugins
+
+sample-plugin_image_include = echo $(arch_lib_dir)/vlib_plugins
+
+ifneq ($($(PLATFORM)_uses_dpdk),no)
+sample-plugin_configure_args = --with-dpdk
+ifeq ($($(PLATFORM)_uses_external_dpdk),yes)
+sample-plugin_CPPFLAGS += -I$($(PLATFORM)_dpdk_inc_dir)
+sample-plugin_LDFLAGS += -L$($(PLATFORM)_dpdk_lib_dir)
 else
-CMAKE?=cmake
+sample-plugin_configure_depend += dpdk-install
+sample-plugin_CPPFLAGS += $(call installed_includes_fn, dpdk)
+sample-plugin_LDFLAGS += $(call installed_libs_fn, dpdk)
+endif
 endif
-
-sample-plugin_cmake_args ?=
-sample-plugin_cmake_args += -DCMAKE_INSTALL_PREFIX:PATH=$(PACKAGE_INSTALL_DIR)
-sample-plugin_cmake_args += -DCMAKE_C_FLAGS="$($(TAG)_TAG_CFLAGS)"
-sample-plugin_cmake_args += -DCMAKE_SHARED_LINKER_FLAGS="$($(TAG)_TAG_LDFLAGS)"
-sample-plugin_cmake_args += -DCMAKE_PREFIX_PATH:PATH="$(PACKAGE_INSTALL_DIR)/../vpp"
-
-sample-plugin_configure = \
-  cd $(PACKAGE_BUILD_DIR) && \
-  $(CMAKE) -G Ninja $(sample-plugin_cmake_args) \
-  $(call find_source_fn,$(PACKAGE_SOURCE))$(PACKAGE_SUBDIR)
-
-sample-plugin_build = $(CMAKE) --build $(PACKAGE_BUILD_DIR) -- $(MAKE_PARALLEL_FLAGS)
-
-sample-plugin_install = $(CMAKE) --build $(PACKAGE_BUILD_DIR) -- install
--- a/build-data/packages/src.mk
+++ b/build-data/packages/src.mk
@ -1,12 +0,0 @@
-# Copyright (c) 2015 Cisco and/or its affiliates.
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at:
-#
-#     http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
--- a/build-data/packages/svm.mk
+++ b/build-data/packages/svm.mk
@ -0,0 +1,5 @@
+svm_top_srcdir = $(call find_source_fn,svm)
+svm_configure_depend = vppinfra-install
+
+svm_CPPFLAGS = $(call installed_includes_fn, vppinfra)
+svm_LDFLAGS = $(call installed_libs_fn, vppinfra)
--- a/build-data/packages/vlib-api-cavium-dpdk.mk
+++ b/build-data/packages/vlib-api-cavium-dpdk.mk
@ -0,0 +1,6 @@
+vlib-api-cavium-dpdk_source = vlib-api
+
+vlib-api-cavium-dpdk_configure_depend = vppinfra-install svm-install vlib-cavium-dpdk-install
+
+vlib-api-cavium-dpdk_CPPFLAGS = $(call installed_includes_fn, vppinfra svm vlib-cavium-dpdk)
+vlib-api-cavium-dpdk_LDFLAGS = $(call installed_libs_fn, vppinfra svm vlib-cavium-dpdk)
--- a/build-data/packages/vlib-api.mk
+++ b/build-data/packages/vlib-api.mk
@ -0,0 +1,4 @@
+vlib-api_configure_depend = vppinfra-install svm-install vlib-install
+
+vlib-api_CPPFLAGS = $(call installed_includes_fn, vppinfra svm vlib)
+vlib-api_LDFLAGS = $(call installed_libs_fn, vppinfra svm vlib)
--- a/build-data/packages/vlib-cavium-dpdk.mk
+++ b/build-data/packages/vlib-cavium-dpdk.mk
@ -0,0 +1,7 @@
+vlib-cavium-dpdk_source = vlib
+vlib-cavium-dpdk_configure_depend = vppinfra-install cavium-dpdk-install
+
+vlib-cavium-dpdk_configure_args += --with-dpdk
+
+vlib-cavium-dpdk_CPPFLAGS = $(call installed_includes_fn, vppinfra cavium-dpdk)
+vlib-cavium-dpdk_LDFLAGS = $(call installed_libs_fn, vppinfra cavium-dpdk)
--- a/build-data/packages/vlib.mk
+++ b/build-data/packages/vlib.mk
@ -0,0 +1,16 @@
+vlib_configure_depend = vppinfra-install
+
+vlib_CPPFLAGS = $(call installed_includes_fn, vppinfra)
+vlib_LDFLAGS = $(call installed_libs_fn, vppinfra)
+
+ifneq ($($(PLATFORM)_uses_dpdk),no)
+vlib_configure_args += --with-dpdk
+ifeq ($($(PLATFORM)_uses_external_dpdk),yes)
+vlib_CPPFLAGS += -I$($(PLATFORM)_dpdk_inc_dir)
+vlib_LDFLAGS += -L$($(PLATFORM)_dpdk_lib_dir)
+else
+vlib_configure_depend += dpdk-install
+vlib_CPPFLAGS += $(call installed_includes_fn, dpdk)
+vlib_LDFLAGS += $(call installed_libs_fn, dpdk)
+endif
+endif
--- a/build-data/packages/vnet-cavium-dpdk.mk
+++ b/build-data/packages/vnet-cavium-dpdk.mk
@ -0,0 +1,29 @@
+vnet-cavium-dpdk_source = vnet
+
+vnet-cavium-dpdk_configure_depend =		\
+    vppinfra-install				\
+    cavium-dpdk-install				\
+    svm-install					\
+    vlib-api-cavium-dpdk-install		\
+    vlib-cavium-dpdk-install 
+
+
+vnet-cavium-dpdk_CPPFLAGS = $(call installed_includes_fn,	\
+    vppinfra							\
+    cavium-dpdk							\
+    openssl							\
+    svm								\
+    vlib-cavium-dpdk						\
+    vlib-api-cavium-dpdk)
+
+vnet-cavium-dpdk_LDFLAGS = $(call installed_libs_fn,	\
+    vppinfra						\
+    cavium-dpdk						\
+    openssl						\
+    svm							\
+    vlib-cavium-dpdk					\
+    vlib-api-cavium-dpdk)
+
+# Platform dependent configure flags
+vnet-cavium-dpdk_configure_args += $(vnet-cavium-dpdk_configure_args_$(PLATFORM))
+
--- a/build-data/packages/vnet.mk
+++ b/build-data/packages/vnet.mk
@ -0,0 +1,41 @@
+vnet_configure_depend = 			\
+    vppinfra-install 				\
+    svm-install					\
+    vlib-api-install 				\
+    vlib-install 
+
+vnet_CPPFLAGS = $(call installed_includes_fn, 	\
+    vppinfra 					\
+    svm						\
+    vlib 					\
+    vlib-api)
+
+vnet_LDFLAGS = $(call installed_libs_fn, 	\
+    vppinfra					\
+    svm						\
+    vlib					\
+    vlib-api)
+
+ifeq ($($(PLATFORM)_enable_tests),yes)
+vnet_configure_args += --enable-tests
+endif
+
+# Platform dependent configure flags
+vnet_configure_args += $(vnet_configure_args_$(PLATFORM))
+
+# include & link with openssl only if needed
+ifneq ($($(PLATFORM)_uses_openssl),no)
+vnet_CPPFLAGS += $(call installed_includes_fn, openssl)
+vnet_LDFLAGS += $(call installed_libs_fn, openssl)
+endif
+
+ifneq ($($(PLATFORM)_uses_dpdk),no)
+ifeq ($($(PLATFORM)_uses_external_dpdk),yes)
+vnet_CPPFLAGS += -I$($(PLATFORM)_dpdk_inc_dir)
+vnet_LDFLAGS += -L$($(PLATFORM)_dpdk_lib_dir)
+else
+vnet_configure_depend += dpdk-install
+vnet_CPPFLAGS += $(call installed_includes_fn, dpdk)
+vnet_LDFLAGS += $(call installed_libs_fn, dpdk)
+endif
+endif
--- a/build-data/packages/vpp-api-test-cavium-dpdk.mk
+++ b/build-data/packages/vpp-api-test-cavium-dpdk.mk
@ -0,0 +1,32 @@
+vpp-api-test-cavium-dpdk_source = vpp-api-test
+
+vpp-api-test-cavium-dpdk_configure_depend =	\
+	vppinfra-install			\
+	cavium-dpdk-install			\
+	svm-install				\
+	vlib-api-cavium-dpdk-install		\
+	vlib-cavium-dpdk-install		\
+	vnet-cavium-dpdk-install		\
+	vpp-cavium-dpdk-install
+
+# 
+vpp-api-test-cavium-dpdk_configure_args = --with-dpdk 
+
+vpp-api-test-cavium-dpdk_CPPFLAGS = $(call installed_includes_fn,	\
+	vppinfra							\
+	cavium-dpdk							\
+	svm								\
+	vlib-cavium-dpdk						\
+	vlib-api-cavium-dpdk						\
+	vnet-cavium-dpdk						\
+	vpp-cavium-dpdk)
+
+vpp-api-test-cavium-dpdk_LDFLAGS = $(call installed_libs_fn,	\
+	vppinfra						\
+	cavium-dpdk						\
+	svm							\
+	vlib-cavium-dpdk					\
+	vlib-api-cavium-dpdk					\
+	vnet-cavium-dpdk					\
+	vpp-cavium-dpdk)
+
--- a/build-data/packages/vpp-api-test.mk
+++ b/build-data/packages/vpp-api-test.mk
@ -0,0 +1,35 @@
+vpp-api-test_configure_depend =			\
+	vppinfra-install			\
+	svm-install				\
+	vlib-api-install			\
+	vlib-install				\
+	vnet-install				\
+	vpp-install
+
+vpp-api-test_CPPFLAGS = $(call installed_includes_fn,	\
+	vppinfra					\
+	svm						\
+	vlib						\
+	vlib-api					\
+	vnet						\
+	vpp)
+
+vpp-api-test_LDFLAGS = $(call installed_libs_fn,	\
+	vppinfra					\
+	svm						\
+	vlib						\
+	vlib-api					\
+	vnet						\
+	vpp)
+
+ifneq ($($(PLATFORM)_uses_dpdk),no)
+vpp-api-test_configure_args = --with-dpdk
+ifeq ($($(PLATFORM)_uses_external_dpdk),yes)
+vpp-api-test_CPPFLAGS += -I$($(PLATFORM)_dpdk_inc_dir)
+vpp-api-test_LDFLAGS += -L$($(PLATFORM)_dpdk_lib_dir)
+else
+vpp-api-test_configure_depend += dpdk-install
+vpp-api-test_CPPFLAGS += $(call installed_includes_fn, dpdk)
+vpp-api-test_LDFLAGS += $(call installed_libs_fn, dpdk)
+endif
+endif
--- a/Show More
+++ b/Show More
Author	SHA1	Message	Date
Ed Warnicke	693f4358de	Fix generate-deb-changelog to handle YY.MM release generate-deb-changelog was only properly handling x.y.z releases. This patch fixes it to handle YY.MM. Change-Id: Iaaee8ff747abd6754d021535c889f67ad2c9998f Signed-off-by: Ed Warnicke <eaw@cisco.com>	2016-06-15 23:18:38 -05:00
Damjan Marion	1f25d1a2ec	Fix double-enqueued packet in interface-output dual-loop, fixes VPP-116 When speculative enqueue fails and a buffer needs to be moved to a new node queue the original buffer is not correctly removed from the original queue so buffer get send for transmit and encryption at the same time. This issue will only be hit with the double loop so low throughput traffic like pings will not hit the issue. This code path is also only hit when the feature flag is enabled so will not be hit by normal traffic Patch also reorgnizes code to reduce number of branches in the interface output node loop. Change-Id: I3653400e58bdfd833e6c42823bab51586128b54b Signed-off-by: Sergio Gonzalez Monroy <sergio.gonzalez.monroy@intel.com> Signed-off-by: Damjan Marion <damarion@cisco.com>	2016-06-15 16:38:41 +02:00
Damjan Marion	a55cf2c1e5	Reset new indirect adjacdncy template before using it Change-Id: Ia69ba39364d4dfa1403c8fbb77b7990226bbcb85 Signed-off-by: Damjan Marion <damarion@cisco.com>	2016-06-15 16:17:44 +02:00
Pierre Pfister	584b99a012	VPP-117: Fix ip4 and ip6 lookup and rewrite traces Previous patch was printing wrong data since rewrite node traces an ethernet packet while other ip nodes trace an IP packet. This patch introduces different tracing functions for: - lookup node (where the fib index is valid) - rewrite node (where an ethernet frame is available) - other ip nodes (only the ip header is traced) Change-Id: I5971a2e89ae8668f5aed4a410565a5f27e01fc22 Signed-off-by: Pierre Pfister <ppfister@cisco.com>	2016-06-13 13:30:47 +01:00
Dave Barach	cf2aa43150	VPP-106: fix performance hit due to unprefetched data read Change-Id: I1325b60b6deadcb51631e178011a31ee70c06cc7 Signed-off-by: Dave Barach <dave@barachs.net>	2016-06-09 09:50:38 -04:00
Pierre Pfister	363db88095	VPP-117: Add trace to ip4 and ip6 lookup nodes The absence of trace in ip lookup nodes is misleading to many people. This patch adds ip lookup tracing and therefore contribute to worldwide happiness. In addition, this patch makes sure sw_if_index[VLIB_TX] is considered when tracing the fib_index value. In ip4/6-rewrite, the value corresponds to the tx interface index. The formatting function is therefore modified to take that case into account. Change-Id: I5915f0446a15c45e391eedfdfcedd9057aa6a237 Signed-off-by: Pierre Pfister <ppfister@cisco.com>	2016-06-09 13:38:05 +00:00
Ed Warnicke	419e65629c	VPP-127 Removed spurious use of sudo Change-Id: I1eb18fc6379db30fb802e3b929931788f54e7dc2 Signed-off-by: Ed Warnicke <eaw@cisco.com>	2016-06-09 01:38:42 +00:00
John Lo	90da24356f	VPP-115: Remove stale ACL CLIs which are not supported The old ACL CLIs still show up in CLI help which can confuse users. Change-Id: I9a3722d3d649c4370df6a09b2c07628e7e4aa0f4 Signed-off-by: John Lo <loj@cisco.com>	2016-06-09 00:44:33 +00:00
Ed Warnicke	3c1f5321e5	VPP-127: Make rpm/deb provide vpp group to access vpp-api Change-Id: I005f971ec5bfbffc5ddd392ff5ae829186b2bf18 Signed-off-by: Ed Warnicke <eaw@cisco.com> (cherry picked from commit `1f9933d9f0`) Signed-off-by: Ed Warnicke <eaw@cisco.com>	2016-06-09 00:43:50 +00:00
Ed Warnicke	cb74b6edd8	VPP-129: Add build-root/scripts/csit-test-branch script This script returns the csit branch that should be used for testing and verification. Related to csit patch: https://gerrit.fd.io/r/#/c/1344/ Change-Id: I51e44e4ba4dc433056ac8a870f8b7c7f9518189b Signed-off-by: Ed Warnicke <eaw@cisco.com>	2016-06-08 23:44:59 +00:00
Ed Warnicke	43f87e2d23	VPP-124: Fix rpms to work out of the box. Currently, for vpp we are not building any rpms for dpdk or igb_uio. This is because uio_pci_generic as shipped with centos works with vpp. However, our vpp rpms do not install kernel module uio_pci_generic at start up and the /etc/vpp/startup.conf does not configure vpp to use uio_pci_generic. vpp rpms should do both, so that when the vpp rpm is installed and vpp started, it just works out of the box. This patch fixes the rpms to do so. Change-Id: Ib934b51f9271cded466d235aa4044bef75c35960 Signed-off-by: Ed Warnicke <eaw@cisco.com> (cherry picked from commit `40c6639428`)	2016-06-08 20:46:08 +00:00
Dave Barach	cf6511560e	VPP-83: fix collateral damage Accidentally removed pthread_mutex_unlock (&root_rp->mutex) in the dead client scan case. Oops. Bad idea. Change-Id: I488b7e39d01c267052785bd346e8846351db90a9 Signed-off-by: Dave Barach <dave@barachs.net>	2016-06-07 17:36:12 -04:00
Filip Tehlar	3f23e9a3c8	ONE-18: Fix trailing garbage string in LISP status dump API Change-Id: I5cba5eae5a981e41df3f227834a079e10982537f Signed-off-by: Filip Tehlar <ftehlar@cisco.com>	2016-06-06 13:29:10 +02:00
Dave Wallace	fe82e14267	VPP-112: linux kernel info missing from build log Change-Id: I343418d409d682b00e74e41236382fdc6b3c780c Signed-off-by: Dave Wallace <dwallacelf@gmail.com>	2016-06-05 13:49:55 +00:00
John Lo	1904214884	VPP-113: BVI shall filter unicast DMAC for L2 to L3 forwading As BVI receive a packet with unicast DMAC from the BD, including unknown unicast flood packet, the packet should not be L3 forwarded unless its DMAC matches the MAC of the BVI. Change-Id: I46e18629c901062592c8ebe3a238c5cfdc1096b4 Signed-off-by: John Lo <loj@cisco.com>	2016-06-04 00:02:37 -04:00
John Lo	2671f1188d	VPP-100: Fix IP4 local handling of TCP/IP fragmented packet Fix previous change that does not work on little endian machines. Use inline call ip4_is_fragment() which is endian neutral. Change-Id: I5a35d89d936650ab6c628dfc388b8c992a74a589 Signed-off-by: John Lo <loj@cisco.com>	2016-06-03 20:48:31 -04:00
Chris Luke	b98a3a87a9	VPP-91 fix sr tunnel add_del collision check The add_del function was not properly checking if a tunnel already existed; instead it was checking if the given tunnel name existed. If no tunnel name was given it flat out refused to add a tunnel even though that is optional. Cleanup the add/del parameter validation to "do what I expect" it to do: When adding a tunnel: - If a "name" is given, it must not exist. - The "key" is always checked, and must not exist. When deleting a tunnel: - If the "name" is given, and it exists, then use it. - If the "name" is not given, use the "key". - If the "name" and the "key" are given, then both must point to the same thing. Change-Id: I9b48ae0203f9664cf8af0f7dc49bf480ddec10d5 Signed-off-by: Chris Luke <chrisy@flirble.org> (cherry picked from commit `e544360053`)	2016-06-03 00:58:17 +00:00
Chris Luke	1f752a3f8f	VPP-92 Fixup some srv6 issues Some small fixes to the srv6 code to bring it toward conformance with draft-previdi-6man-segment-routing-header-05. - The first segment needs to remain in the segment list. - The segment list template needs a space for the ultimate destination. - The ultimate destination needs to be inserted into that space when adding the SRH. Change-Id: I66db6912e0128da084f14ceca20918ef67ccff79 Signed-off-by: Chris Luke <chrisy@flirble.org> (cherry picked from commit `4b8b718ff9`)	2016-06-03 00:57:10 +00:00
Ed Warnicke	45eb9713fe	VPP-107 Fix for mistake that breaks pkg-rpm in https://gerrit.fd.io/r/#/c/1338/ Change-Id: I8b7fffe24cbeb435b18faaada9ef1cea9fd93d39 Signed-off-by: Ed Warnicke <eaw@cisco.com>	2016-06-03 00:28:49 +00:00
John Lo	5faba3aae6	VPP-106: Patch e40i driver to support VLAN sub-interface Check packet for presence of VLAN tag in the MAC header and set the PKT_RX_VLAN_PKT flag to trigger sub-interface lookup in VPP ethernet-input node. Change-Id: Iadbfc59d08ef85efb936c88323a90194f3cd656f Signed-off-by: John Lo <loj@cisco.com>	2016-06-02 15:52:21 -04:00
John Lo	142db43bb6	VPP-100: Fix IPv4 local handling of IP fragmented packets Before VPP is enhenced to do IP reassembly of local packets, just set the protocol path to "experimental" for now so they will be error-punted as unknow IP protocol. Change-Id: I2ffefb0b4205357653ba24d80c722cafd5972fba Signed-off-by: John Lo <loj@cisco.com>	2016-06-02 14:16:29 +00:00
Chris Luke	a0e1f31b3d	VPP-105 Map API SHM uid/gid name to number When providing uid or gid for the API SHM, if non-numeric values are given look them up in the local system user database and if found use the values discovered. Change-Id: I95152f58646643bc44d2af4cbad6338901935c69 Signed-off-by: Chris Luke <chrisy@flirble.org>	2016-06-01 19:50:09 -04:00
Chris Luke	966bef4ad1	VPP-98 Dedicated storage for VXLAN over IPv6 hash keys When creating VXLAN over IPv6 the code was using storage for the hash key that could later be moved. Since the key is larger than the word size this was being referenced as a pointer; when the storage moves that breaks the hash. Instead allocate dedicated storage for the key. This patch also includes other minor cleanups, including using clib_memcpy in places it should be used and some whitespace fixes. Change-Id: I579f2cb515853ef56dedcca350fcad08aa6111a9 Signed-off-by: Chris Luke <chrisy@flirble.org>	2016-06-01 19:53:54 +00:00
Dave Barach	db0cf7963b	VPP-83 Allow non-privileged clients to use the vpp binary API. Use the command line argument "api-segment { uid <nnn> gid <nnn> }" to configure shared memory segment file ownership. Defaults to uid = gid = 0. Shared-memory segments are explicitly set to 0770 mode, aka "rwxrwx---". Change-Id: Ic5d596b68139add61e7de6ace035c57dfd030111 Signed-off-by: Dave Barach <dave@barachs.net>	2016-06-01 19:21:58 +00:00
John Lo	8d9e80583f	VPP-102: vHost reconnect to previously used sockets on VPP restart Change-Id: Ida11bddb52268e0e8513b7b379eeed6103bd48f1 Signed-off-by: John Lo <loj@cisco.com>	2016-05-31 23:32:09 +00:00
Ed Warnicke	6795fb9f70	Fix build-root/scripts/version to not have spurious ~ Change-Id: Id28f134e3a4aa19c5756014d53004501db0d0c88 Signed-off-by: Ed Warnicke <eaw@cisco.com>	2016-05-31 21:35:22 +00:00
John Lo	245576a438	VPP97: Flooding of pkts with multiple buffers in BD with BVI crashes VPP The loopback interface should use vnet_interface_output_no_flatten so follow-on buffers of a jumbo packet do not get put on the output frame and be sent back to ethernet-input or l2-input node. The replication_recycle_callback() function should not assume follow-on buffers of a jumbo packet are on the buffer free list. Change-Id: Ide646a6d9b43e82782c0581ea3022a9e70f82582 Signed-off-by: John Lo <loj@cisco.com>	2016-05-31 16:25:13 -04:00
Andrej Kozemcak	68660906e6	ONE-15: Fix duplicate locator, refactoring locator Check duplication locator and clean after locator when remove it. Refactoring locator_set code. Change-Id: Ib83cbcddc7a363a60fa5b6a366203d0dc0ea7ca6 Signed-off-by: Andrej Kozemcak <akozemca@cisco.com>	2016-05-30 09:17:17 +02:00
John Lo	3d4110fe0c	VPP-96 ENID driver update for rx of jumbo pkts using muliple mbuf's Change-Id: I0e985b079da3224f4886e3ee2cece4d046e291eb Signed-off-by: John Lo <loj@cisco.com>	2016-05-28 11:44:45 -04:00
Chris Luke	f090a30eef	VPP-95 VXLAN add_del API intermittent failure The VXLAN add_del API sometimes rejects calls with VNET_API_ERROR_SAME_SRC_DST when the two parameters are obviously different. This is because the API code is checking the "is_ip6" flag in a not-yet initialized area of memory leading to random results. Also fix help text for vxlan_add_del_tunnel in vat. This does not change the API; it repairs intermittent failure. Change-Id: I41863694f478c1f669078f82f69d8cca4841c989 Signed-off-by: Chris Luke <chrisy@flirble.org>	2016-05-27 12:11:24 -04:00
Andrej Kozemcak	edc40dbda0	ONE-14: Fix crash when re-enable Lisp Change-Id: Ib95338d7055dea9036eddb7dff5ca7ccbcb35639 Signed-off-by: Andrej Kozemcak <akozemca@cisco.com> (cherry picked from commit `94e34764b4`)	2016-05-25 12:20:03 +00:00
Hongjun Ni	aafe40deae	VPP-89: Fix an issue in format_vxlan_gpe_tunnel Change-Id: Ie81e2eb918e441ddaa9e7ab57e8bb0129f0f4f8f Signed-off-by: Hongjun Ni <hongjun.ni@intel.com>	2016-05-25 17:35:51 +08:00
Marek Gradzki	205c75c8db	VPP-86: fix array copy in generated JNI code Change-Id: Ic67b3c0623d98c5ee3f1ffa1e1bd9cfb96b233bd Signed-off-by: Marek Gradzki <mgradzki@cisco.com>	2016-05-24 17:33:16 +02:00
Chris Luke	1728f85066	VPP-77 Creating VXLAN over IPv6 via API fails Tunnel dst is incorrectly being set to the requested src address. Change-Id: I44e2ee475f0572e78d148951c5d4684e85e08ce7 Signed-off-by: Chris Luke <chrisy@flirble.org>	2016-05-20 12:14:32 -04:00
Ed Warnicke	2c386b26c6	Add newline to the end of .gitreview Change-Id: I9a5a97c4a42b8aebbb6ba132879b7843ca7cfacd Signed-off-by: Ed Warnicke <eaw@cisco.com>	2016-05-16 20:37:19 -05:00
Ed Warnicke	826d4f7b1f	Initial changes for stable/1606 branch This patch adds an entry for the defaultbranch in .gitreview and also changes the generated jar file version to 16.06. Change-Id: I9acd35745eee7daa90d9abcc33e75b76c11af76e Signed-off-by: Ed Warnicke <eaw@cisco.com>	2016-05-16 15:03:17 -05:00