This commit is contained in:
Joel Challis
2021-07-31 14:35:30 +01:00
committed by GitHub
parent 206a995ccd
commit 70fb3e1aaf
76 changed files with 95 additions and 92 deletions

View File

@ -52,7 +52,7 @@ Here is an example using 2 drivers.
Define these arrays listing all the LEDs in your `<keyboard>.c`:
```c
const is31_led g_is31_leds[DRIVER_LED_TOTAL] = {
const is31_led __flash g_is31_leds[DRIVER_LED_TOTAL] = {
/* Refer to IS31 manual for these locations
* driver
* | LED address

View File

@ -52,7 +52,7 @@ Here is an example using 2 drivers.
Define these arrays listing all the LEDs in your `<keyboard>.c`:
```c
const is31_led g_is31_leds[DRIVER_LED_TOTAL] = {
const is31_led __flash g_is31_leds[DRIVER_LED_TOTAL] = {
/* Refer to IS31 manual for these locations
* driver
* | R location
@ -122,7 +122,7 @@ Currently only 4 drivers are supported, but it would be trivial to support all 8
Define these arrays listing all the LEDs in your `<keyboard>.c`:
```c
const is31_led g_is31_leds[DRIVER_LED_TOTAL] = {
const is31_led __flash g_is31_leds[DRIVER_LED_TOTAL] = {
/* Refer to IS31 manual for these locations
* driver
* | R location
@ -186,7 +186,7 @@ Currently only 2 drivers are supported, but it would be trivial to support all 4
Define these arrays listing all the LEDs in your `<keyboard>.c`:
```c
const is31_led PROGMEM g_is31_leds[DRIVER_LED_TOTAL] = {
const is31_led __flash g_is31_leds[DRIVER_LED_TOTAL] = {
/* Refer to IS31 manual for these locations
* driver
* | R location
@ -287,7 +287,7 @@ Here is an example using 2 drivers.
Define these arrays listing all the LEDs in your `<keyboard>.c`:
```c
const aw_led g_aw_leds[DRIVER_LED_TOTAL] = {
const aw_led __flash g_aw_leds[DRIVER_LED_TOTAL] = {
/* Each AW20216 channel is controlled by a register at some offset between 0x00
* and 0xD7 inclusive.
* See drivers/awinic/aw20216.h for the mapping between register offsets and

View File

@ -52,7 +52,7 @@ I2C IS31FL3731 RGB コントローラを使ったアドレス指定可能な LED
`<keyboard>.c` に全ての LED を列挙する配列を定義します:
const is31_led g_is31_leds[DRIVER_LED_TOTAL] = {
const is31_led __flash g_is31_leds[DRIVER_LED_TOTAL] = {
/* これらの位置については IS31 マニュアルを参照してください
* driver
* | LED address

View File

@ -18,6 +18,7 @@
#include <stdint.h>
#include <stdbool.h>
#include "progmem.h"
#include "gpio.h"
typedef struct aw_led {
@ -27,7 +28,7 @@ typedef struct aw_led {
uint8_t b;
} aw_led;
extern const aw_led g_aw_leds[DRIVER_LED_TOTAL];
extern const aw_led __flash g_aw_leds[DRIVER_LED_TOTAL];
void AW20216_init(pin_t cs_pin, pin_t en_pin);
void AW20216_set_color(int index, uint8_t red, uint8_t green, uint8_t blue);

View File

@ -20,13 +20,14 @@
#include <stdint.h>
#include <stdbool.h>
#include "progmem.h"
typedef struct is31_led {
uint8_t driver : 2;
uint8_t v;
} __attribute__((packed)) is31_led;
extern const is31_led g_is31_leds[DRIVER_LED_TOTAL];
extern const is31_led __flash g_is31_leds[DRIVER_LED_TOTAL];
void IS31FL3731_init(uint8_t addr);
void IS31FL3731_write_register(uint8_t addr, uint8_t reg, uint8_t data);

View File

@ -19,6 +19,7 @@
#include <stdint.h>
#include <stdbool.h>
#include "progmem.h"
typedef struct is31_led {
uint8_t driver : 2;
@ -27,7 +28,7 @@ typedef struct is31_led {
uint8_t b;
} __attribute__((packed)) is31_led;
extern const is31_led g_is31_leds[DRIVER_LED_TOTAL];
extern const is31_led __flash g_is31_leds[DRIVER_LED_TOTAL];
void IS31FL3731_init(uint8_t addr);
void IS31FL3731_write_register(uint8_t addr, uint8_t reg, uint8_t data);

View File

@ -20,6 +20,7 @@
#include <stdint.h>
#include <stdbool.h>
#include "progmem.h"
typedef struct is31_led {
uint8_t driver : 2;
@ -28,7 +29,7 @@ typedef struct is31_led {
uint8_t b;
} __attribute__((packed)) is31_led;
extern const is31_led g_is31_leds[DRIVER_LED_TOTAL];
extern const is31_led __flash g_is31_leds[DRIVER_LED_TOTAL];
void IS31FL3733_init(uint8_t addr, uint8_t sync);
bool IS31FL3733_write_register(uint8_t addr, uint8_t reg, uint8_t data);

View File

@ -18,6 +18,7 @@
#include <stdint.h>
#include <stdbool.h>
#include "progmem.h"
// Simple interface option.
// If these aren't defined, just define them to make it compile
@ -37,7 +38,7 @@ typedef struct is31_led {
uint8_t b;
} __attribute__((packed)) is31_led;
extern const is31_led g_is31_leds[DRIVER_LED_TOTAL];
extern const is31_led __flash g_is31_leds[DRIVER_LED_TOTAL];
void IS31FL3736_init(uint8_t addr);
void IS31FL3736_write_register(uint8_t addr, uint8_t reg, uint8_t data);

View File

@ -19,7 +19,6 @@
#include "is31fl3737.h"
#include "i2c_master.h"
#include "wait.h"
#include "progmem.h"
// This is a 7-bit address, that gets left-shifted and bit 0
// set to 0 for write, 1 for read (as per I2C protocol)
@ -155,9 +154,7 @@ void IS31FL3737_init(uint8_t addr) {
void IS31FL3737_set_color(int index, uint8_t red, uint8_t green, uint8_t blue) {
if (index >= 0 && index < DRIVER_LED_TOTAL) {
// copy the led config from progmem to SRAM
is31_led led;
memcpy_P(&led, (&g_is31_leds[index]), sizeof(led));
is31_led led = g_is31_leds[index];
g_pwm_buffer[led.driver][led.r] = red;
g_pwm_buffer[led.driver][led.g] = green;
@ -173,9 +170,7 @@ void IS31FL3737_set_color_all(uint8_t red, uint8_t green, uint8_t blue) {
}
void IS31FL3737_set_led_control_register(uint8_t index, bool red, bool green, bool blue) {
// copy the led config from progmem to SRAM
is31_led led;
memcpy_P(&led, (&g_is31_leds[index]), sizeof(led));
is31_led led = g_is31_leds[index];
uint8_t control_register_r = led.r / 8;
uint8_t control_register_g = led.g / 8;

View File

@ -20,6 +20,7 @@
#include <stdint.h>
#include <stdbool.h>
#include "progmem.h"
typedef struct is31_led {
uint8_t driver : 2;
@ -28,7 +29,7 @@ typedef struct is31_led {
uint8_t b;
} __attribute__((packed)) is31_led;
extern const is31_led g_is31_leds[DRIVER_LED_TOTAL];
extern const is31_led __flash g_is31_leds[DRIVER_LED_TOTAL];
void IS31FL3737_init(uint8_t addr);
void IS31FL3737_write_register(uint8_t addr, uint8_t reg, uint8_t data);

View File

@ -21,6 +21,7 @@
#include <stdint.h>
#include <stdbool.h>
#include "progmem.h"
typedef struct is31_led {
uint32_t driver : 2;
@ -29,7 +30,7 @@ typedef struct is31_led {
uint32_t b : 10;
} __attribute__((packed)) is31_led;
extern const is31_led g_is31_leds[DRIVER_LED_TOTAL];
extern const is31_led __flash g_is31_leds[DRIVER_LED_TOTAL];
void IS31FL3741_init(uint8_t addr);
void IS31FL3741_write_register(uint8_t addr, uint8_t reg, uint8_t data);

View File

@ -16,7 +16,7 @@
#include "gen1.h"
#ifdef LED_MATRIX_ENABLE
const is31_led g_is31_leds[DRIVER_LED_TOTAL] = {
const is31_led __flash g_is31_leds[DRIVER_LED_TOTAL] = {
/* Refer to IS31 manual for these locations
* driver
* | LED address

View File

@ -17,7 +17,7 @@
#include "dp60.h"
#ifdef RGB_MATRIX_ENABLE
const is31_led g_is31_leds[DRIVER_LED_TOTAL] = {
const is31_led __flash g_is31_leds[DRIVER_LED_TOTAL] = {
/* Refer to IS31 manual for these locations
* driver
* | R location

View File

@ -18,7 +18,7 @@
#ifdef RGB_MATRIX_ENABLE
const is31_led g_is31_leds[DRIVER_LED_TOTAL] = {
const is31_led __flash g_is31_leds[DRIVER_LED_TOTAL] = {
/* Refer to IS31 manual for these locations
* driver
* | R location

View File

@ -19,7 +19,7 @@
#ifdef RGB_MATRIX_ENABLE
const is31_led g_is31_leds[DRIVER_LED_TOTAL] = {
const is31_led __flash g_is31_leds[DRIVER_LED_TOTAL] = {
/* Refer to IS31 manual for these locations
* driver
* | R location

View File

@ -18,7 +18,7 @@
#ifdef RGB_MATRIX_ENABLE
const is31_led g_is31_leds[DRIVER_LED_TOTAL] = {
const is31_led __flash g_is31_leds[DRIVER_LED_TOTAL] = {
/* Refer to IS31 manual for these locations
* driver
* | R location

View File

@ -1,7 +1,7 @@
#include "dz60rgb.h"
#ifdef RGB_MATRIX_ENABLE
const is31_led g_is31_leds[DRIVER_LED_TOTAL] = {
const is31_led __flash g_is31_leds[DRIVER_LED_TOTAL] = {
{ 0, K_14, J_14, L_14 },
{ 0, K_13, J_13, L_13 },
{ 0, K_12, J_12, L_12 },

View File

@ -1,7 +1,7 @@
#include "dz60rgb_ansi.h"
#ifdef RGB_MATRIX_ENABLE
const is31_led g_is31_leds[DRIVER_LED_TOTAL] = {
const is31_led __flash g_is31_leds[DRIVER_LED_TOTAL] = {
{ 0, K_14, J_14, L_14 },
{ 0, K_13, J_13, L_13 },
{ 0, K_12, J_12, L_12 },

View File

@ -1,7 +1,7 @@
#include "dz60rgb_wkl.h"
#ifdef RGB_MATRIX_ENABLE
const is31_led g_is31_leds[DRIVER_LED_TOTAL] = {
const is31_led __flash g_is31_leds[DRIVER_LED_TOTAL] = {
{ 0, H_15, G_15, I_15 },
{ 0, K_14, J_14, L_14 },
{ 0, K_13, J_13, L_13 },

View File

@ -16,7 +16,7 @@
#include "v1.h"
#ifdef RGB_MATRIX_ENABLE
const is31_led g_is31_leds[DRIVER_LED_TOTAL] = {
const is31_led __flash g_is31_leds[DRIVER_LED_TOTAL] = {
{ 0, C8_8, C7_8, C6_8 },
{ 0, C9_8, C7_7, C6_7 },
{ 0, C9_7, C8_7, C6_6 },

View File

@ -16,7 +16,7 @@
#include "v2.h"
#ifdef RGB_MATRIX_ENABLE
const is31_led g_is31_leds[DRIVER_LED_TOTAL] = {
const is31_led __flash g_is31_leds[DRIVER_LED_TOTAL] = {
{ 0, C8_8, C7_8, C6_8 },
{ 0, C9_8, C7_7, C6_7 },
{ 0, C9_7, C8_7, C6_6 },

View File

@ -18,7 +18,7 @@
#ifdef RGB_MATRIX_ENABLE
const is31_led g_is31_leds[DRIVER_LED_TOTAL] = {
const is31_led __flash g_is31_leds[DRIVER_LED_TOTAL] = {
{0, CS21_SW1, CS20_SW1, CS19_SW1},
{0, CS21_SW2, CS20_SW2, CS19_SW2},
{0, CS21_SW3, CS20_SW3, CS19_SW3},

View File

@ -243,7 +243,7 @@ const keypos_t PROGMEM hand_swap_config[MATRIX_ROWS][MATRIX_COLS] = {
#ifdef RGB_MATRIX_ENABLE
// clang-format off
const is31_led g_is31_leds[DRIVER_LED_TOTAL] = {
const is31_led __flash g_is31_leds[DRIVER_LED_TOTAL] = {
/* driver
* | R location
* | | G location

View File

@ -191,7 +191,7 @@ const keypos_t PROGMEM hand_swap_config[MATRIX_ROWS][MATRIX_COLS] = {
#endif
#ifdef LED_MATRIX_ENABLE
const is31_led g_is31_leds[DRIVER_LED_TOTAL] = {
const is31_led __flash g_is31_leds[DRIVER_LED_TOTAL] = {
// The numbers in the comments are the led numbers DXX on the PCB
/* Refer to IS31 manual for these locations
* driver

View File

@ -11,7 +11,7 @@ void matrix_init_kb(void) {
matrix_init_user();
}
const is31_led g_is31_leds[DRIVER_LED_TOTAL] = {
const is31_led __flash g_is31_leds[DRIVER_LED_TOTAL] = {
/* Refer to IS31 manual for these locations
* driver
* | R location

View File

@ -54,7 +54,7 @@ void set_fallacy_led(int index, bool state) {
/* define LED matrix
*/
const is31_led g_is31_leds[DRIVER_LED_TOTAL] = {
const is31_led __flash g_is31_leds[DRIVER_LED_TOTAL] = {
{0, C1_1},
{0, C2_1},
{0, C3_1},

View File

@ -1,5 +1,5 @@
#include "tester.h"
const is31_led g_is31_leds[DRIVER_LED_TOTAL] = {
const is31_led __flash g_is31_leds[DRIVER_LED_TOTAL] = {
/* Refer to IS31 manual for these locations
* driver
* | R location

View File

@ -91,7 +91,7 @@ void raw_hid_receive( uint8_t *data, uint8_t length )
#ifdef HS60_ANSI
const is31_led g_is31_leds[DRIVER_LED_TOTAL] = {
const is31_led __flash g_is31_leds[DRIVER_LED_TOTAL] = {
/* Refer to IS31 manual for these locations
* driver
* | R location
@ -199,7 +199,7 @@ led_config_t g_led_config = { {
#else
const is31_led g_is31_leds[DRIVER_LED_TOTAL] = {
const is31_led __flash g_is31_leds[DRIVER_LED_TOTAL] = {
/* Refer to IS31 manual for these locations
* driver
* | R location

View File

@ -20,7 +20,7 @@
#include "hotswap.h"
#ifdef RGB_MATRIX_ENABLE
const is31_led g_is31_leds[DRIVER_LED_TOTAL] = {
const is31_led __flash g_is31_leds[DRIVER_LED_TOTAL] = {
/* Refer to IS31 manual for these locations
* driver
* | R location

View File

@ -20,7 +20,7 @@
#include "universal.h"
#ifdef RGB_MATRIX_ENABLE
const is31_led g_is31_leds[DRIVER_LED_TOTAL] = {
const is31_led __flash g_is31_leds[DRIVER_LED_TOTAL] = {
/* Refer to IS31 manual for these locations
* driver
* | R location

Some files were not shown because too many files have changed in this diff Show More