[Keyboard] add rartlice (#10495)
* Create bootloader_defs.h * Create chconf.h * Create config.h * Create halconf.h * Create info.json * Create mcuconf.h * Create rartlice.c * Create rartlice.h * Create readme.md * Update readme.md * Create rules.mk * Create keymap.c * Update config.h * Update rules.mk * Update config.h * Update keymap.c * Update rules.mk * Delete bootloader_defs.h * Update rules.mk
This commit is contained in:
Alabahuy
711
keyboards/rart/rartlice/chconf.h
Normal file
711
keyboards/rart/rartlice/chconf.h
Normal file
File diff suppressed because it is too large
Load Diff
67
keyboards/rart/rartlice/config.h
Normal file
67
keyboards/rart/rartlice/config.h
Normal file
@ -0,0 +1,67 @@
|
||||
/*
|
||||
Copyright 2020 Alabahuy
|
||||
|
||||
This program is free software: you can redistribute it and/or modify
|
||||
it under the terms of the GNU General Public License as published by
|
||||
the Free Software Foundation, either version 2 of the License, or
|
||||
(at your option) any later version.
|
||||
|
||||
This program is distributed in the hope that it will be useful,
|
||||
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
GNU General Public License for more details.
|
||||
|
||||
You should have received a copy of the GNU General Public License
|
||||
along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
|
||||
#pragma once
|
||||
|
||||
/* USB Device descriptor parameter */
|
||||
#define VENDOR_ID 0x414C
|
||||
#define PRODUCT_ID 0x0065
|
||||
#define DEVICE_VER 0x0001
|
||||
#define MANUFACTURER Alabahuy
|
||||
#define PRODUCT Rartlice
|
||||
|
||||
/* key matrix size */
|
||||
#define MATRIX_ROWS 5
|
||||
#define MATRIX_COLS 15
|
||||
|
||||
#define MATRIX_COL_PINS { B12, B8, B5, B4, B3, B11, B10, B1, B0, A7, A6, A5, A3, A4, A1 }
|
||||
#define MATRIX_ROW_PINS { B13, A15, B9, A2, A0 }
|
||||
#define DIODE_DIRECTION COL2ROW
|
||||
|
||||
/* define if matrix has ghost */
|
||||
//#define MATRIX_HAS_GHOST
|
||||
|
||||
/* Set 0 if debouncing isn't needed */
|
||||
#define DEBOUNCE 5
|
||||
|
||||
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
|
||||
#define LOCKING_SUPPORT_ENABLE
|
||||
/* Locking resynchronize hack */
|
||||
#define LOCKING_RESYNC_ENABLE
|
||||
|
||||
#define RGBLIGHT_ANIMATIONS
|
||||
#define RGB_DI_PIN B15
|
||||
#define RGBLED_NUM 11
|
||||
#define WS2812_SPI SPID2
|
||||
|
||||
/*
|
||||
* Feature disable options
|
||||
* These options are also useful to firmware size reduction.
|
||||
*/
|
||||
|
||||
/* disable debug print */
|
||||
//#define NO_DEBUG
|
||||
|
||||
/* disable print */
|
||||
//#define NO_PRINT
|
||||
|
||||
/* disable action features */
|
||||
//#define NO_ACTION_LAYER
|
||||
//#define NO_ACTION_TAPPING
|
||||
//#define NO_ACTION_ONESHOT
|
||||
//#define NO_ACTION_MACRO
|
||||
//#define NO_ACTION_FUNCTION
|
||||
522
keyboards/rart/rartlice/halconf.h
Normal file
522
keyboards/rart/rartlice/halconf.h
Normal file
File diff suppressed because it is too large
Load Diff
84
keyboards/rart/rartlice/info.json
Normal file
84
keyboards/rart/rartlice/info.json
Normal file
@ -0,0 +1,84 @@
|
||||
{
|
||||
"keyboard_name": "Rartlice",
|
||||
"url": "",
|
||||
"maintainer": "Alabahuy",
|
||||
"width": 15,
|
||||
"height": 5,
|
||||
"layouts": {
|
||||
"LAYOUT_all": {
|
||||
"layout": [
|
||||
{"label" : " ", "x":0, "y":0},
|
||||
{"label" : "Esc", "x":1.25, "y":0},
|
||||
{"label" : "1", "x":2.25, "y":0},
|
||||
{"label" : "2", "x":3.25, "y":0},
|
||||
{"label" : "3", "x":4.25, "y":0},
|
||||
{"label" : "4", "x":5.25, "y":0},
|
||||
{"label" : "5", "x":6.25, "y":0},
|
||||
{"label" : "6", "x":7.25, "y":0},
|
||||
{"label" : "7", "x":9.25, "y":0},
|
||||
{"label" : "8", "x":10.25, "y":0},
|
||||
{"label" : "9", "x":11.25, "y":0},
|
||||
{"label" : "0", "x":12.25, "y":0},
|
||||
{"label" : "-", "x":13.25, "y":0},
|
||||
{"label" : "=", "x":14.25, "y":0},
|
||||
{"label" : "|", "x":15.25, "y":0},
|
||||
{"label" : "Delete", "x":16.25, "y":0},
|
||||
|
||||
{"label" : " ", "x":0, "y":1},
|
||||
{"label" : "Tab", "x":1.25, "y":1, "w":1.5},
|
||||
{"label" : "Q", "x":2.75, "y":1},
|
||||
{"label" : "W", "x":3.75, "y":1},
|
||||
{"label" : "E", "x":4.75, "y":1},
|
||||
{"label" : "R", "x":5.75, "y":1},
|
||||
{"label" : "T", "x":6.75, "y":1},
|
||||
{"label" : "Y", "x":8.75, "y":1},
|
||||
{"label" : "U", "x":9.75, "y":1},
|
||||
{"label" : "I", "x":10.75, "y":1},
|
||||
{"label" : "O", "x":11.75, "y":1},
|
||||
{"label" : "P", "x":12.75, "y":1},
|
||||
{"label" : "[", "x":13.75, "y":1},
|
||||
{"label" : "]", "x":14.75, "y":1},
|
||||
{"label" : "|", "x":15.75, "y":1, "w":1.5},
|
||||
|
||||
{"label" : " ", "x":0, "y":2},
|
||||
{"label" : "Caps lock", "x":1.25, "y":2, "w":1.75},
|
||||
{"label" : "A", "x":3, "y":2},
|
||||
{"label" : "S", "x":4, "y":2},
|
||||
{"label" : "D", "x":5, "y":2},
|
||||
{"label" : "F", "x":6, "y":2},
|
||||
{"label" : "G", "x":8, "y":2},
|
||||
{"label" : "H", "x":9, "y":2},
|
||||
{"label" : "J", "x":10, "y":2},
|
||||
{"label" : "K", "x":11, "y":2},
|
||||
{"label" : "L", "x":12, "y":2},
|
||||
{"label" : ";", "x":13, "y":2},
|
||||
{"label" : "'", "x":14, "y":2},
|
||||
{"label" : "Enter", "x":15, "y":2, "w":2.25},
|
||||
|
||||
{"label" : "Shift", "x":1.25, "y":3, "w":2.25},
|
||||
{"label" : "Z", "x":3.5, "y":3},
|
||||
{"label" : "X", "x":4.5, "y":3},
|
||||
{"label" : "C", "x":5.5, "y":3},
|
||||
{"label" : "V", "x":6.5, "y":3},
|
||||
{"label" : "B", "x":7.5, "y":3},
|
||||
{"label" : "N", "x":9.5, "y":3},
|
||||
{"label" : "M", "x":10.5, "y":3},
|
||||
{"label" : ",", "x":11.5, "y":3},
|
||||
{"label" : ".", "x":12.5, "y":3},
|
||||
{"label" : "/", "x":13.5, "y":3},
|
||||
{"label" : "Shift", "x":14.5, "y":3, "w":1.75},
|
||||
{"label" : "Up", "x":16.5, "y":3.25},
|
||||
|
||||
{"label" : "Ctrl", "x":1.25, "y":4, "w":1.25},
|
||||
{"label" : "Alt", "x":4.25, "y":4, "w":1.25},
|
||||
{"label" : "Space", "x":5.5, "y":4, "w":2},
|
||||
{"label" : "Fn", "x":7.5, "y":4},
|
||||
{"label" : "Space", "x":9.5, "y":4, "w":2.75},
|
||||
{"label" : "Ctrl", "x":12.25, "y":4, "w":1.5},
|
||||
{"label" : "Left", "x":15.5, "y":4.25 },
|
||||
{"label" : "Down", "x":16.5, "y":4.25 },
|
||||
{"label" : "Right", "x":17.5, "y":4.25 }
|
||||
]
|
||||
}
|
||||
}
|
||||
}
|
||||
60
keyboards/rart/rartlice/keymaps/default/keymap.c
Normal file
60
keyboards/rart/rartlice/keymaps/default/keymap.c
Normal file
@ -0,0 +1,60 @@
|
||||
/*
|
||||
Copyright 2020 Alabahuy
|
||||
|
||||
This program is free software: you can redistribute it and/or modify
|
||||
it under the terms of the GNU General Public License as published by
|
||||
the Free Software Foundation, either version 2 of the License, or
|
||||
(at your option) any later version.
|
||||
|
||||
This program is distributed in the hope that it will be useful,
|
||||
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
GNU General Public License for more details.
|
||||
|
||||
You should have received a copy of the GNU General Public License
|
||||
along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
#include QMK_KEYBOARD_H
|
||||
|
||||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
|
||||
[0] = LAYOUT_all(
|
||||
KC_GESC, KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_GRV, KC_DEL,
|
||||
KC_PGUP, KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSPC,
|
||||
KC_PGDN, KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT,
|
||||
KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP,
|
||||
KC_LCTL, KC_LALT, KC_SPC, MO(1), KC_SPC, KC_RALT, KC_LEFT, KC_DOWN, KC_RGHT
|
||||
),
|
||||
[1] = LAYOUT_all(
|
||||
KC_NLCK, RGB_TOG, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, _______, _______,
|
||||
KC_SLCK, _______, RGB_MOD, RGB_HUI, RGB_SAI, RGB_VAI, _______, KC_P7, KC_P8, KC_P9, KC_P0, _______, _______, _______, _______,
|
||||
_______, _______, RGB_RMOD, RGB_HUD, RGB_SAD, RGB_VAD, _______, KC_P4, KC_P5, KC_P6, _______, _______, _______, _______,
|
||||
_______, _______, _______, _______, _______, _______, KC_P1, KC_P2, KC_P3, _______, _______, _______, _______,
|
||||
_______, _______, _______, _______, _______, _______, _______, _______, _______
|
||||
),
|
||||
|
||||
};
|
||||
|
||||
#ifdef OLED_DRIVER_ENABLE
|
||||
void oled_task_user(void) {
|
||||
// Host Keyboard Layer Status
|
||||
oled_write_P(PSTR("R A R T L I C E\nLayer: "), false);
|
||||
|
||||
switch (get_highest_layer(layer_state)) {
|
||||
case 0:
|
||||
oled_write_P(PSTR("Default\n"), false);
|
||||
break;
|
||||
case 1:
|
||||
oled_write_P(PSTR("FN\n"), false);
|
||||
break;
|
||||
default:
|
||||
// Or use the write_ln shortcut over adding '\n' to the end of your string
|
||||
oled_write_ln_P(PSTR("Undefined\n"), false);
|
||||
}
|
||||
|
||||
// Host Keyboard LED Status
|
||||
led_t led_state = host_keyboard_led_state();
|
||||
oled_write_P(led_state.num_lock ? PSTR("NUM ") : PSTR(" "), false);
|
||||
oled_write_P(led_state.caps_lock ? PSTR("CAP ") : PSTR(" "), false);
|
||||
oled_write_P(led_state.scroll_lock ? PSTR("SCR ") : PSTR(" "), false);
|
||||
}
|
||||
#endif
|
||||
206
keyboards/rart/rartlice/mcuconf.h
Normal file
206
keyboards/rart/rartlice/mcuconf.h
Normal file
@ -0,0 +1,206 @@
|
||||
/*
|
||||
ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
|
||||
Licensed under the Apache License, Version 2.0 (the "License");
|
||||
you may not use this file except in compliance with the License.
|
||||
You may obtain a copy of the License at
|
||||
http://www.apache.org/licenses/LICENSE-2.0
|
||||
Unless required by applicable law or agreed to in writing, software
|
||||
distributed under the License is distributed on an "AS IS" BASIS,
|
||||
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
|
||||
See the License for the specific language governing permissions and
|
||||
limitations under the License.
|
||||
*/
|
||||
|
||||
#ifndef _MCUCONF_H_
|
||||
#define _MCUCONF_H_
|
||||
|
||||
#define STM32F103_MCUCONF
|
||||
|
||||
/*
|
||||
* STM32F103 drivers configuration.
|
||||
* The following settings override the default settings present in
|
||||
* the various device driver implementation headers.
|
||||
* Note that the settings for each driver only have effect if the whole
|
||||
* driver is enabled in halconf.h.
|
||||
*
|
||||
* IRQ priorities:
|
||||
* 15...0 Lowest...Highest.
|
||||
*
|
||||
* DMA priorities:
|
||||
* 0...3 Lowest...Highest.
|
||||
*/
|
||||
|
||||
/*
|
||||
* HAL driver system settings.
|
||||
*/
|
||||
#define STM32_NO_INIT FALSE
|
||||
#define STM32_HSI_ENABLED TRUE
|
||||
#define STM32_LSI_ENABLED FALSE
|
||||
#define STM32_HSE_ENABLED TRUE
|
||||
#define STM32_LSE_ENABLED FALSE
|
||||
#define STM32_SW STM32_SW_PLL
|
||||
#define STM32_PLLSRC STM32_PLLSRC_HSE
|
||||
#define STM32_PLLXTPRE STM32_PLLXTPRE_DIV1
|
||||
#define STM32_PLLMUL_VALUE 9
|
||||
#define STM32_HPRE STM32_HPRE_DIV1
|
||||
#define STM32_PPRE1 STM32_PPRE1_DIV2
|
||||
#define STM32_PPRE2 STM32_PPRE2_DIV2
|
||||
#define STM32_ADCPRE STM32_ADCPRE_DIV4
|
||||
#define STM32_USB_CLOCK_REQUIRED TRUE
|
||||
#define STM32_USBPRE STM32_USBPRE_DIV1P5
|
||||
#define STM32_MCOSEL STM32_MCOSEL_NOCLOCK
|
||||
#define STM32_RTCSEL STM32_RTCSEL_HSEDIV
|
||||
#define STM32_PVD_ENABLE FALSE
|
||||
#define STM32_PLS STM32_PLS_LEV0
|
||||
|
||||
/*
|
||||
* ADC driver system settings.
|
||||
*/
|
||||
#define STM32_ADC_USE_ADC1 FALSE
|
||||
#define STM32_ADC_ADC1_DMA_PRIORITY 2
|
||||
#define STM32_ADC_ADC1_IRQ_PRIORITY 6
|
||||
|
||||
/*
|
||||
* CAN driver system settings.
|
||||
*/
|
||||
#define STM32_CAN_USE_CAN1 FALSE
|
||||
#define STM32_CAN_CAN1_IRQ_PRIORITY 11
|
||||
|
||||
/*
|
||||
* EXT driver system settings.
|
||||
*/
|
||||
#define STM32_EXT_EXTI0_IRQ_PRIORITY 6
|
||||
#define STM32_EXT_EXTI1_IRQ_PRIORITY 6
|
||||
#define STM32_EXT_EXTI2_IRQ_PRIORITY 6
|
||||
#define STM32_EXT_EXTI3_IRQ_PRIORITY 6
|
||||
#define STM32_EXT_EXTI4_IRQ_PRIORITY 6
|
||||
#define STM32_EXT_EXTI5_9_IRQ_PRIORITY 6
|
||||
#define STM32_EXT_EXTI10_15_IRQ_PRIORITY 6
|
||||
#define STM32_EXT_EXTI16_IRQ_PRIORITY 6
|
||||
#define STM32_EXT_EXTI17_IRQ_PRIORITY 6
|
||||
#define STM32_EXT_EXTI18_IRQ_PRIORITY 6
|
||||
#define STM32_EXT_EXTI19_IRQ_PRIORITY 6
|
||||
|
||||
/*
|
||||
* GPT driver system settings.
|
||||
*/
|
||||
#define STM32_GPT_USE_TIM1 FALSE
|
||||
#define STM32_GPT_USE_TIM2 FALSE
|
||||
#define STM32_GPT_USE_TIM3 FALSE
|
||||
#define STM32_GPT_USE_TIM4 FALSE
|
||||
#define STM32_GPT_USE_TIM5 FALSE
|
||||
#define STM32_GPT_USE_TIM8 FALSE
|
||||
#define STM32_GPT_TIM1_IRQ_PRIORITY 7
|
||||
#define STM32_GPT_TIM2_IRQ_PRIORITY 7
|
||||
#define STM32_GPT_TIM3_IRQ_PRIORITY 7
|
||||
#define STM32_GPT_TIM4_IRQ_PRIORITY 7
|
||||
#define STM32_GPT_TIM5_IRQ_PRIORITY 7
|
||||
#define STM32_GPT_TIM8_IRQ_PRIORITY 7
|
||||
|
||||
/*
|
||||
* I2C driver system settings.
|
||||
*/
|
||||
#define STM32_I2C_USE_I2C1 TRUE
|
||||
#define STM32_I2C_USE_I2C2 FALSE
|
||||
#define STM32_I2C_BUSY_TIMEOUT 50
|
||||
#define STM32_I2C_I2C1_IRQ_PRIORITY 5
|
||||
#define STM32_I2C_I2C2_IRQ_PRIORITY 5
|
||||
#define STM32_I2C_I2C1_DMA_PRIORITY 3
|
||||
#define STM32_I2C_I2C2_DMA_PRIORITY 3
|
||||
#define STM32_I2C_DMA_ERROR_HOOK(i2cp) osalSysHalt("DMA failure")
|
||||
|
||||
/*
|
||||
* ICU driver system settings.
|
||||
*/
|
||||
#define STM32_ICU_USE_TIM1 FALSE
|
||||
#define STM32_ICU_USE_TIM2 FALSE
|
||||
#define STM32_ICU_USE_TIM3 FALSE
|
||||
#define STM32_ICU_USE_TIM4 FALSE
|
||||
#define STM32_ICU_USE_TIM5 FALSE
|
||||
#define STM32_ICU_USE_TIM8 FALSE
|
||||
#define STM32_ICU_TIM1_IRQ_PRIORITY 7
|
||||
#define STM32_ICU_TIM2_IRQ_PRIORITY 7
|
||||
#define STM32_ICU_TIM3_IRQ_PRIORITY 7
|
||||
#define STM32_ICU_TIM4_IRQ_PRIORITY 7
|
||||
#define STM32_ICU_TIM5_IRQ_PRIORITY 7
|
||||
#define STM32_ICU_TIM8_IRQ_PRIORITY 7
|
||||
|
||||
/*
|
||||
* PWM driver system settings.
|
||||
*/
|
||||
#define STM32_PWM_USE_ADVANCED FALSE
|
||||
#define STM32_PWM_USE_TIM1 TRUE
|
||||
#define STM32_PWM_USE_TIM2 FALSE
|
||||
#define STM32_PWM_USE_TIM3 FALSE
|
||||
#define STM32_PWM_USE_TIM4 FALSE
|
||||
#define STM32_PWM_USE_TIM5 FALSE
|
||||
#define STM32_PWM_USE_TIM8 FALSE
|
||||
#define STM32_PWM_TIM1_IRQ_PRIORITY 7
|
||||
#define STM32_PWM_TIM2_IRQ_PRIORITY 7
|
||||
#define STM32_PWM_TIM3_IRQ_PRIORITY 7
|
||||
#define STM32_PWM_TIM4_IRQ_PRIORITY 7
|
||||
#define STM32_PWM_TIM5_IRQ_PRIORITY 7
|
||||
#define STM32_PWM_TIM8_IRQ_PRIORITY 7
|
||||
|
||||
/*
|
||||
* RTC driver system settings.
|
||||
*/
|
||||
#define STM32_RTC_IRQ_PRIORITY 15
|
||||
|
||||
/*
|
||||
* SERIAL driver system settings.
|
||||
*/
|
||||
#define STM32_SERIAL_USE_USART1 FALSE
|
||||
#define STM32_SERIAL_USE_USART2 FALSE
|
||||
#define STM32_SERIAL_USE_USART3 FALSE
|
||||
#define STM32_SERIAL_USE_UART4 FALSE
|
||||
#define STM32_SERIAL_USE_UART5 FALSE
|
||||
#define STM32_SERIAL_USART1_PRIORITY 12
|
||||
#define STM32_SERIAL_USART2_PRIORITY 12
|
||||
#define STM32_SERIAL_USART3_PRIORITY 12
|
||||
#define STM32_SERIAL_UART4_PRIORITY 12
|
||||
#define STM32_SERIAL_UART5_PRIORITY 12
|
||||
|
||||
/*
|
||||
* SPI driver system settings.
|
||||
*/
|
||||
#define STM32_SPI_USE_SPI1 FALSE
|
||||
#define STM32_SPI_USE_SPI2 TRUE
|
||||
#define STM32_SPI_USE_SPI3 FALSE
|
||||
#define STM32_SPI_SPI1_DMA_PRIORITY 1
|
||||
#define STM32_SPI_SPI2_DMA_PRIORITY 1
|
||||
#define STM32_SPI_SPI3_DMA_PRIORITY 1
|
||||
#define STM32_SPI_SPI1_IRQ_PRIORITY 10
|
||||
#define STM32_SPI_SPI2_IRQ_PRIORITY 10
|
||||
#define STM32_SPI_SPI3_IRQ_PRIORITY 10
|
||||
#define STM32_SPI_DMA_ERROR_HOOK(spip) osalSysHalt("DMA failure")
|
||||
|
||||
/*
|
||||
* ST driver system settings.
|
||||
*/
|
||||
#define STM32_ST_IRQ_PRIORITY 8
|
||||
#define STM32_ST_USE_TIMER 2
|
||||
|
||||
/*
|
||||
* UART driver system settings.
|
||||
*/
|
||||
#define STM32_UART_USE_USART1 FALSE
|
||||
#define STM32_UART_USE_USART2 FALSE
|
||||
#define STM32_UART_USE_USART3 FALSE
|
||||
#define STM32_UART_USART1_IRQ_PRIORITY 12
|
||||
#define STM32_UART_USART2_IRQ_PRIORITY 12
|
||||
#define STM32_UART_USART3_IRQ_PRIORITY 12
|
||||
#define STM32_UART_USART1_DMA_PRIORITY 0
|
||||
#define STM32_UART_USART2_DMA_PRIORITY 0
|
||||
#define STM32_UART_USART3_DMA_PRIORITY 0
|
||||
#define STM32_UART_DMA_ERROR_HOOK(uartp) osalSysHalt("DMA failure")
|
||||
|
||||
/*
|
||||
* USB driver system settings.
|
||||
*/
|
||||
#define STM32_USB_USE_USB1 TRUE
|
||||
#define STM32_USB_LOW_POWER_ON_SUSPEND FALSE
|
||||
#define STM32_USB_USB1_HP_IRQ_PRIORITY 13
|
||||
#define STM32_USB_USB1_LP_IRQ_PRIORITY 14
|
||||
|
||||
#endif /* _MCUCONF_H_ */
|
||||
36
keyboards/rart/rartlice/rartlice.c
Normal file
36
keyboards/rart/rartlice/rartlice.c
Normal file
@ -0,0 +1,36 @@
|
||||
/* Copyright 2020 Alabahuy
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 2 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
|
||||
#include "rartlice.h"
|
||||
|
||||
void keyboard_pre_init_kb(void) {
|
||||
led_init_ports();
|
||||
keyboard_pre_init_user();
|
||||
}
|
||||
|
||||
void led_init_ports(void) {
|
||||
setPinOutput(A8);
|
||||
setPinOutput(B14);
|
||||
setPinOutput(A9);
|
||||
}
|
||||
|
||||
bool led_update_kb(led_t led_state) {
|
||||
if (led_update_user(led_state)) {
|
||||
writePin(A8, !led_state.num_lock);
|
||||
writePin(B14, !led_state.caps_lock);
|
||||
writePin(A9, !led_state.scroll_lock);
|
||||
}
|
||||
return true;
|
||||
}
|
||||
27
keyboards/rart/rartlice/rartlice.h
Normal file
27
keyboards/rart/rartlice/rartlice.h
Normal file
@ -0,0 +1,27 @@
|
||||
#pragma once
|
||||
|
||||
#include "quantum.h"
|
||||
|
||||
/* This a shortcut to help you visually see your layout.
|
||||
*
|
||||
* The first section contains all of the arguments representing the physical
|
||||
* layout of the board and position of the keys.
|
||||
*
|
||||
* The second converts the arguments into a two-dimensional array which
|
||||
* represents the switch matrix.
|
||||
*/
|
||||
|
||||
#define LAYOUT_all( \
|
||||
K00, K01, K02, K03, K04, K14, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0E, \
|
||||
K10, K11, K12, K13, K24, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, K1E, \
|
||||
K20, K21, K22, K23, K34, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D, \
|
||||
K31, K32, K33, K44, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3E, \
|
||||
K41, K43, K45, K46, K48, K4A, K4C, K4D, K4E \
|
||||
) \
|
||||
{ \
|
||||
{ K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0E }, \
|
||||
{ K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, K1E }, \
|
||||
{ K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D, KC_NO }, \
|
||||
{ KC_NO, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, KC_NO, K3E }, \
|
||||
{ KC_NO, K41, KC_NO, K43, K44, K45, K46, KC_NO, K48, KC_NO, K4A, KC_NO, K4C, K4D, K4E }, \
|
||||
}
|
||||
15
keyboards/rart/rartlice/readme.md
Normal file
15
keyboards/rart/rartlice/readme.md
Normal file
@ -0,0 +1,15 @@
|
||||
# Rartlice
|
||||
|
||||
|
||||
|
||||
A 65% Ergo Layout Mechanical Keyboard with Blue Pill STM32F103C8T6-based inspired by TGR Alice, Arisu and Cannon keys Practice60 based on [IMKG](https://www.facebook.com/groups/indomechanicalkeyboard/) (Indonesia Mechanical Keyboard Group)
|
||||
|
||||
* Keyboard Maintainer: [Alabahuy](https://github.com/alabahuy)
|
||||
* Hardware Supported: RARTLICE PCB, Mini USB, Blue Pill STM32F103C8T6, RGB underglow
|
||||
* Hardware Availability: Private GB
|
||||
|
||||
Make example for this keyboard (after setting up your build environment):
|
||||
|
||||
make rart/rartlice:default
|
||||
|
||||
See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
|
||||
27
keyboards/rart/rartlice/rules.mk
Normal file
27
keyboards/rart/rartlice/rules.mk
Normal file
@ -0,0 +1,27 @@
|
||||
# MCU name
|
||||
MCU = STM32F103
|
||||
|
||||
# Bootloader selection
|
||||
BOOTLOADER = stm32duino
|
||||
|
||||
# Build Options
|
||||
# change yes to no to disable
|
||||
#
|
||||
BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration
|
||||
MOUSEKEY_ENABLE = yes # Mouse keys
|
||||
EXTRAKEY_ENABLE = yes # Audio control and System control
|
||||
CONSOLE_ENABLE = yes # Console for debug
|
||||
COMMAND_ENABLE = yes # Commands for debug and configuration
|
||||
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
|
||||
SLEEP_LED_ENABLE = yes # Breathing sleep LED during USB suspend
|
||||
# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
|
||||
NKRO_ENABLE = yes # USB Nkey Rollover
|
||||
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality
|
||||
RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow
|
||||
BLUETOOTH_ENABLE = no # Enable Bluetooth
|
||||
AUDIO_ENABLE = no # Audio output
|
||||
WS2812_DRIVER = spi
|
||||
OLED_DRIVER_ENABLE = yes
|
||||
|
||||
# Enter lower-power sleep mode when on the ChibiOS idle thread
|
||||
OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE
|
||||
Reference in New Issue
Block a user