LED Matrix: rename LED_DRIVER_LED_COUNT to DRIVER_LED_TOTAL (#11858)

* Fixed some comments in the defines file.

* Replaced the Git command layer with a Windows Terminal shortcut layer.

* Added numbered tab switching to the Windows Terminal layer.

* Added 'new tab' and 'command pane' commands to the Windows Terminal layer.

* Shortened the USB polling interval for the Iris to 1 millisecond.

* Disabled old style macros and functions for the Iris.

.github/workflows/format.yaml

@@ -28,10 +28,16 @@ jobs:
         bin/qmk pyformat
         bin/qmk fileformat
 
-    - name: Commit files
-      uses: stefanzweifel/git-auto-commit-action@v4
+    - name: Become QMK Bot
+      run: |
+        git config user.name 'QMK Bot'
+        git config user.email 'hello@qmk.fm'
+
+    - name: Create Pull Request
+      uses: peter-evans/create-pull-request@v3
       with:
-        commit_message: Format code according to conventions for $GITHUB_SHA
-        commit_user_name: QMK Bot
-        commit_user_email: hello@qmk.fm
-        commit_author: QMK Bot <hello@qmk.fm>
+        delete-branch: true
+        author: QMK Bot <hello@qmk.fm>
+        committer: QMK Bot <hello@qmk.fm>
+        commit-message: Format code according to conventions
+        title: '[CI] Format code according to conventions'

bootloader.mk

@@ -20,15 +20,19 @@
 # Sets the bootloader defined in the keyboard's/keymap's rules.mk
 # Current options:
 #
-# halfkay        PJRC Teensy
-# caterina       Pro Micro (Sparkfun/generic)
-# atmel-dfu      Atmel factory DFU
-# lufa-dfu       LUFA DFU
-# qmk-dfu        QMK DFU (LUFA + blinkenlight)
-# bootloadHID    HIDBootFlash compatible (ATmega32A)
-# USBasp         USBaspLoader (ATmega328P)
-# kiibohd        Input:Club Kiibohd bootloader (only used on their boards)
-# stm32duino     STM32Duino (STM32F103x8)
+# AVR:
+#     halfkay     PJRC Teensy
+#     caterina    Pro Micro (Sparkfun/generic)
+#     atmel-dfu   Atmel factory DFU
+#     lufa-dfu    LUFA DFU
+#     qmk-dfu     QMK DFU (LUFA + blinkenlight)
+#     bootloadHID HIDBootFlash compatible (ATmega32A)
+#     USBasp      USBaspLoader (ATmega328P)
+# ARM:
+#     kiibohd     Input:Club Kiibohd bootloader (only used on their boards)
+#     stm32duino  STM32Duino (STM32F103x8)
+#     stm32-dfu   STM32 USB DFU in ROM
+#     apm32-dfu   APM32 USB DFU in ROM
 #
 # BOOTLOADER_SIZE can still be defined manually, but it's recommended
 # you add any possible configuration to this list
@@ -95,6 +99,20 @@ ifdef BOOTLOADER_SIZE
     OPT_DEFS += -DBOOTLOADER_SIZE=$(strip $(BOOTLOADER_SIZE))
 endif
 
+ifeq ($(strip $(BOOTLOADER)), stm32-dfu)
+    OPT_DEFS += -DBOOTLOADER_STM32_DFU
+
+    # Options to pass to dfu-util when flashing
+    DFU_ARGS ?= -d 0483:DF11 -a 0 -s 0x08000000:leave
+    DFU_SUFFIX_ARGS ?= -v 0483 -p DF11
+endif
+ifeq ($(strip $(BOOTLOADER)), apm32-dfu)
+    OPT_DEFS += -DBOOTLOADER_APM32_DFU
+
+    # Options to pass to dfu-util when flashing
+    DFU_ARGS ?= -d 314B:0106 -a 0 -s 0x08000000:leave
+    DFU_SUFFIX_ARGS ?= -v 314B -p 0106
+endif
 ifeq ($(strip $(BOOTLOADER)), kiibohd)
     OPT_DEFS += -DBOOTLOADER_KIIBOHD
     ifeq ($(strip $(MCU_ORIG)), MK20DX128)
@@ -104,10 +122,10 @@ ifeq ($(strip $(BOOTLOADER)), kiibohd)
         MCU_LDSCRIPT = MK20DX256BLDR8
     endif
 
+    # Options to pass to dfu-util when flashing
     DFU_ARGS = -d 1C11:B007
     DFU_SUFFIX_ARGS = -v 1C11 -p B007
 endif
-
 ifeq ($(strip $(BOOTLOADER)), stm32duino)
     OPT_DEFS += -DBOOTLOADER_STM32DUINO
     MCU_LDSCRIPT = STM32F103x8_stm32duino_bootloader
@@ -115,6 +133,7 @@ ifeq ($(strip $(BOOTLOADER)), stm32duino)
     # STM32F103 does NOT have an USB bootloader in ROM (only serial), so setting anything here does not make much sense
     STM32_BOOTLOADER_ADDRESS = 0x80000000
 
-    DFU_ARGS = -d 1EAF:0003 -a2 -R
+    # Options to pass to dfu-util when flashing
+    DFU_ARGS = -d 1EAF:0003 -a 2 -R
     DFU_SUFFIX_ARGS = -v 1EAF -p 0003
 endif

build_keyboard.mk

@@ -283,6 +283,9 @@ ifneq ("$(wildcard $(USER_PATH)/config.h)","")
     CONFIG_H += $(USER_PATH)/config.h
 endif
 
+# Disable features that a keyboard doesn't support
+-include disable_features.mk
+
 # Object files directory
 #     To put object files in current directory, use a dot (.), do NOT make
 #     this an empty or blank macro!

common_features.mk

@@ -17,6 +17,7 @@ SERIAL_PATH := $(QUANTUM_PATH)/serial_link
 
 QUANTUM_SRC += \
     $(QUANTUM_DIR)/quantum.c \
+    $(QUANTUM_DIR)/bitwise.c \
     $(QUANTUM_DIR)/led.c \
     $(QUANTUM_DIR)/keymap_common.c \
     $(QUANTUM_DIR)/keycode_config.c
@@ -24,6 +25,8 @@ QUANTUM_SRC += \
 ifeq ($(strip $(DEBUG_MATRIX_SCAN_RATE_ENABLE)), yes)
     OPT_DEFS += -DDEBUG_MATRIX_SCAN_RATE
     CONSOLE_ENABLE = yes
+else ifeq ($(strip $(DEBUG_MATRIX_SCAN_RATE_ENABLE)), api)
+    OPT_DEFS += -DDEBUG_MATRIX_SCAN_RATE
 endif
 
 ifeq ($(strip $(API_SYSEX_ENABLE)), yes)
@@ -34,6 +37,11 @@ ifeq ($(strip $(API_SYSEX_ENABLE)), yes)
     SRC += $(QUANTUM_DIR)/api.c
 endif
 
+ifeq ($(strip $(COMMAND_ENABLE)), yes)
+    SRC += $(QUANTUM_DIR)/command.c
+    OPT_DEFS += -DCOMMAND_ENABLE
+endif
+
 ifeq ($(strip $(AUDIO_ENABLE)), yes)
     OPT_DEFS += -DAUDIO_ENABLE
     MUSIC_ENABLE = yes
@@ -168,7 +176,6 @@ ifeq ($(strip $(RGBLIGHT_ENABLE)), yes)
     endif
 endif
 
-
 LED_MATRIX_ENABLE ?= no
 VALID_LED_MATRIX_TYPES := IS31FL3731 custom
 # TODO: IS31FL3733 IS31FL3737 IS31FL3741

disable_features.mk

@@ -0,0 +1,31 @@
+# Unconditionally disable features that a keyboard advertises it doesn't support
+
+FEATURE_NAMES :=
+FEATURE_NAMES += ADAFRUIT_BLE
+FEATURE_NAMES += AUDIO
+FEATURE_NAMES += BACKLIGHT
+FEATURE_NAMES += BLUETOOTH
+FEATURE_NAMES += DIP_SWITCH
+FEATURE_NAMES += DYNAMIC_KEYMAP
+FEATURE_NAMES += ENCODER
+FEATURE_NAMES += HAPTIC
+FEATURE_NAMES += HD44780
+FEATURE_NAMES += IOS_DEVICE
+FEATURE_NAMES += LCD_BACKLIGHT
+FEATURE_NAMES += LCD
+FEATURE_NAMES += OLED
+FEATURE_NAMES += POINTING_DEVICE
+FEATURE_NAMES += PRINTING
+FEATURE_NAMES += PS2_MOUSE
+FEATURE_NAMES += RGBLIGHT
+FEATURE_NAMES += RGB_MATRIX
+FEATURE_NAMES += SLEEP_LED
+FEATURE_NAMES += SERIAL_LINK
+FEATURE_NAMES += STENO
+FEATURE_NAMES += SWAP_HANDS
+FEATURE_NAMES += VISUALIZER
+FEATURE_NAMES += WATCHDOG
+FEATURE_NAMES += XT
+
+$(foreach AFEATURE,$(FEATURE_NAMES),\
+	 $(if $(filter $($(AFEATURE)_SUPPORTED),no),$(eval $(AFEATURE)_ENABLE=no)))

docs/README.md

@@ -1,26 +1,20 @@
 # Quantum Mechanical Keyboard Firmware
 
-[![Current Version](https://img.shields.io/github/tag/qmk/qmk_firmware.svg)](https://github.com/qmk/qmk_firmware/tags)
-[![Build Status](https://travis-ci.org/qmk/qmk_firmware.svg?branch=master)](https://travis-ci.org/qmk/qmk_firmware)
-[![Discord](https://img.shields.io/discord/440868230475677696.svg)](https://discord.gg/Uq7gcHh)
-[![Docs Status](https://img.shields.io/badge/docs-ready-orange.svg)](https://docs.qmk.fm)
-[![GitHub contributors](https://img.shields.io/github/contributors/qmk/qmk_firmware.svg)](https://github.com/qmk/qmk_firmware/pulse/monthly)
-[![GitHub forks](https://img.shields.io/github/forks/qmk/qmk_firmware.svg?style=social&label=Fork)](https://github.com/qmk/qmk_firmware/)
-
 ## What is QMK Firmware?
 
 QMK (*Quantum Mechanical Keyboard*) is an open source community centered around developing computer input devices. The community encompasses all sorts of input devices, such as keyboards, mice, and MIDI devices. A core group of collaborators maintains [QMK Firmware](https://github.com/qmk/qmk_firmware), [QMK Configurator](https://config.qmk.fm), [QMK Toolbox](https://github.com/qmk/qmk_toolbox), [qmk.fm](https://qmk.fm), and this documentation with the help of community members like you.
 
 ## Get Started
 
-Totally new to QMK? There are two ways to get started:
+<div class="flex-container">
 
-* Basic: [QMK Configurator](https://config.qmk.fm)
-    * Just select your keyboard from the dropdown and program your keyboard.
-    * We have an [introductory video](https://www.youtube.com/watch?v=-imgglzDMdY) you can watch.
-    * There is also an overview [document you can read](newbs_building_firmware_configurator.md).
-* Advanced: [Use The Source](newbs.md)
-    * More powerful, but harder to use
+?> **Basic** [QMK Configurator](newbs_building_firmware_configurator.md) <br>
+User friendly graphical interfaces, no programming knowledge required.
+
+?> **Advanced** [Use The Source](newbs.md) <br> 
+More powerful, but harder to use.
+
+</div>
 
 ## Make It Yours
 

docs/_summary.md

@@ -3,7 +3,6 @@
   * [Setup](newbs_getting_started.md)
   * [Building Your First Firmware](newbs_building_firmware.md)
   * [Flashing Firmware](newbs_flashing.md)
-  * [Testing and Debugging](newbs_testing_debugging.md)
   * [Getting Help/Support](support.md)
   * [Other Resources](newbs_learn_more_resources.md)
   * [Syllabus](syllabus.md)
@@ -11,7 +10,8 @@
 * FAQs
   * [General FAQ](faq_general.md)
   * [Build/Compile QMK](faq_build.md)
-  * [Debugging/Troubleshooting QMK](faq_debug.md)
+  * [Troubleshooting QMK](faq_misc.md)
+  * [Debugging QMK](faq_debug.md)
   * [Keymap FAQ](faq_keymap.md)
   * [Glossary](reference_glossary.md)
 

docs/api_docs.md

@@ -28,7 +28,7 @@ As you can see the payload describes all aspects of a keyboard necessary to crea
 To compile your keymap into a firmware simply POST your JSON to the `/v1/compile` endpoint. In the following example we've placed the JSON payload into a file named `json_data`.
 
 ```
-$ curl -H "Content-Type: application/json" -X POST -d "$(< json_data)" http://api.qmk.fm/v1/compile
+$ curl -H "Content-Type: application/json" -X POST -d "$(< json_data)" https://api.qmk.fm/v1/compile
 {
   "enqueued": true,
   "job_id": "ea1514b3-bdfc-4a7b-9b5c-08752684f7f6"
@@ -40,7 +40,7 @@ $ curl -H "Content-Type: application/json" -X POST -d "$(< json_data)" http://ap
 After submitting your keymap you can check the status using a simple HTTP GET call:
 
 ```
-$ curl http://api.qmk.fm/v1/compile/ea1514b3-bdfc-4a7b-9b5c-08752684f7f6
+$ curl https://api.qmk.fm/v1/compile/ea1514b3-bdfc-4a7b-9b5c-08752684f7f6
 {
   "created_at": "Sat, 19 Aug 2017 21:39:12 GMT",
   "enqueued_at": "Sat, 19 Aug 2017 21:39:12 GMT",

docs/api_overview.md

@@ -1,6 +1,6 @@
 # QMK API
 
-The QMK API provides an asynchronous API that Web and GUI tools can use to compile arbitrary keymaps for any keyboard supported by [QMK](http://qmk.fm/). The stock keymap template supports all QMK keycodes that do not require supporting C code. Keyboard maintainers can supply their own custom templates to enable more functionality.
+The QMK API provides an asynchronous API that Web and GUI tools can use to compile arbitrary keymaps for any keyboard supported by [QMK](https://qmk.fm/). The stock keymap template supports all QMK keycodes that do not require supporting C code. Keyboard maintainers can supply their own custom templates to enable more functionality.
 
 ## App Developers
 

docs/coding_conventions_c.md

@@ -49,7 +49,7 @@ int foo(void) {
 
 [Clang-format](https://clang.llvm.org/docs/ClangFormat.html) is part of LLVM and can automatically format your code for you, because ain't nobody got time to do it manually. We supply a configuration file for it that applies most of the coding conventions listed above. It will only change whitespace and newlines, so you will still have to remember to include optional braces yourself.
 
-Use the [full LLVM installer](http://llvm.org/builds/) to get clang-format on Windows, or use `sudo apt install clang-format` on Ubuntu.
+Use the [full LLVM installer](https://llvm.org/builds/) to get clang-format on Windows, or use `sudo apt install clang-format` on Ubuntu.
 
 If you run it from the command-line, pass `-style=file` as an option and it will automatically find the .clang-format configuration file in the QMK root directory.
 

docs/compatible_microcontrollers.md

@@ -18,7 +18,7 @@ Certain MCUs which do not have native USB will use [V-USB](https://www.obdev.at/
 
 ## ARM
 
-You can also use any ARM chip with USB that [ChibiOS](http://www.chibios.org) supports. Most have plenty of flash. Known to work are:
+You can also use any ARM chip with USB that [ChibiOS](https://www.chibios.org) supports. Most have plenty of flash. Known to work are:
 
 ### STMicroelectronics (STM32)
 

docs/contributing.md

@@ -23,7 +23,7 @@ Please keep these things in mind:
 
 # Project Overview
 
-QMK is largely written in C, with specific features and parts written in C++. It targets embedded processors found in keyboards, particularly AVR ([LUFA](http://www.fourwalledcubicle.com/LUFA.php)) and ARM ([ChibiOS](http://www.chibios.com)). If you are already well versed in Arduino programming you'll find a lot of the concepts and limitations familiar. Prior experience with Arduino is not required to successfully contribute to QMK.
+QMK is largely written in C, with specific features and parts written in C++. It targets embedded processors found in keyboards, particularly AVR ([LUFA](https://www.fourwalledcubicle.com/LUFA.php)) and ARM ([ChibiOS](https://www.chibios.org)). If you are already well versed in Arduino programming you'll find a lot of the concepts and limitations familiar. Prior experience with Arduino is not required to successfully contribute to QMK.
 
 <!-- FIXME: We should include a list of resources for learning C here. -->
 

docs/de/README.md

@@ -9,7 +9,7 @@
 
 ## Was ist QMK Firmware?
 
-QMK (*Quantum Mechanical Keyboard*) ist eine Open-Source-Community, welche die QMK-Firmware, die QMK-Toolbox, [qmk.fm](https://qmk.fm) und diese Dokumententation betreut. QMK-Firmware ist eine Weiterentwicklung der [tmk\_keyboard](http://github.com/tmk/tmk_keyboard)-Tastatur-Firmware mit vielen nützlichen Zusatzfunktionen für Atmel AVR-Prozessoren. Ursprünglich wurde sie für Produkte von [OLKB](http://olkb.com), das [ErgoDox EZ](http://www.ergodox-ez.com) und das [Clueboard](http://clueboard.co/) entwickelt. Im Laufe der Zeit wurde sie mit Hilfe von [ChibiOS](http://chibios.org) auch für die ARM-Architektur angepasst. Außerdem ist es inzwischen möglich, auch handverdrahtete Tastaturen und selbst geätzte PCBs mit QMK zu verwenden.
+QMK (*Quantum Mechanical Keyboard*) ist eine Open-Source-Community, welche die QMK-Firmware, die QMK-Toolbox, [qmk.fm](https://qmk.fm) und diese Dokumententation betreut. QMK-Firmware ist eine Weiterentwicklung der [tmk\_keyboard](https://github.com/tmk/tmk_keyboard)-Tastatur-Firmware mit vielen nützlichen Zusatzfunktionen für Atmel AVR-Prozessoren. Ursprünglich wurde sie für Produkte von [OLKB](https://olkb.com), das [ErgoDox EZ](https://www.ergodox-ez.com) und das [Clueboard](https://clueboard.co/) entwickelt. Im Laufe der Zeit wurde sie mit Hilfe von [ChibiOS](https://chibios.org) auch für die ARM-Architektur angepasst. Außerdem ist es inzwischen möglich, auch handverdrahtete Tastaturen und selbst geätzte PCBs mit QMK zu verwenden.
 
 ## Bezugsquelle für QMK
 

docs/de/newbs_getting_started.md

@@ -18,7 +18,7 @@ Wenn Du es vorziehst mit einer grafischen Oberfläche zu entwickeln kannst Du au
 
 Du wirst ein Programm benötigen, mit dem Du **plain text** (= reiner Text) Dateien bearbeiten und speichern kannst. Wenn Du Windows benutzt, reicht dafür schon das normale `Notepad` und für Linux z.B. `gedit` oder `leafpad`. Beide sind sehr rudimentäre Editoren deren Funktionsumfang aber vollkommen ausreicht. Für macOS' standard `TextEdit` muss man ein bisschen vorsichtig sein und darauf achten, beim Speichern explizit unter _Format_ die Option _Reiner Text_ auszuwählen.
 
-Ansonsten ist es empfehlenswert, einen Editor herunterzuladen der für die Programmierung und das Bearbeiten von Code ausgelegt ist wie z.b [Notepad++](http://notepad-plus-plus.org/), [Sublime Text](https://www.sublimetext.com/) oder [VS Code](https://code.visualstudio.com/).
+Ansonsten ist es empfehlenswert, einen Editor herunterzuladen der für die Programmierung und das Bearbeiten von Code ausgelegt ist wie z.b [Notepad++](https://notepad-plus-plus.org/), [Sublime Text](https://www.sublimetext.com/) oder [VS Code](https://code.visualstudio.com/).
 
 ?> Immer noch unsicher, welcher Text Editor der Richtige für Dich ist? Laurence Bradford hat eine hervorragende [Einleitung](https://learntocodewith.me/programming/basics/text-editors/) zu dem Thema geschrieben (auf Englisch).
 
@@ -44,7 +44,7 @@ Wir haben versucht, die Installation der Entwicklungsumgebung für QMK so einfac
 
 Du wirst MSYS2 (o.Ä.) und Git benötigen.
 
-* Befolge die Installationsanleitung auf der [MSYS2 Homepage](http://www.msys2.org)
+* Befolge die Installationsanleitung auf der [MSYS2 Homepage](https://www.msys2.org)
 * Schließe alle offenen MSYS2 Fenster und öffne ein neues MSYS2 MinGW 64-bit Terminal
 * Installiere Git mit dem Kommando: `pacman -S git`
 

docs/de/newbs_testing_debugging.md

@@ -10,8 +10,8 @@ Anmerkung: Diese Programme werden weder von QMK bereitgestellt oder gutgeheißen
 
 * [Switch Hitter](https://elitekeyboards.com/switchhitter.php) (Nur für Windows)
 * [Keyboard Viewer](https://www.imore.com/how-use-keyboard-viewer-your-mac) (Nur für Mac)
-* [Keyboard Tester](http://www.keyboardtester.com) (Web basiert)
-* [Keyboard Checker](http://keyboardchecker.com) (Web basiert)
+* [Keyboard Tester](https://www.keyboardtester.com) (Web basiert)
+* [Keyboard Checker](https://keyboardchecker.com) (Web basiert)
 
 ## Debuggen
 

docs/documentation_templates.md

@@ -4,12 +4,12 @@ This page documents the templates you should use when submitting new Keymaps and
 
 ## Keymap `readme.md` Template :id=keyboard-readmemd-template
 
-Most keymaps have an image depicting the layout. You can use [Keyboard Layout Editor](http://keyboard-layout-editor.com) to create an image. Upload it to [Imgur](http://imgur.com) or another hosting service, please do not include images in your Pull Request.
+Most keymaps have an image depicting the layout. You can use [Keyboard Layout Editor](https://keyboard-layout-editor.com) to create an image. Upload it to [Imgur](https://imgur.com) or another hosting service, please do not include images in your Pull Request.
 
 Below the image you should write a short description to help people understand your keymap.
 
 ```
-![Clueboard Layout Image](http://i.imgur.com/7Capi8W.png)
+![Clueboard Layout Image](https://i.imgur.com/7Capi8W.png)
 
 # Default Clueboard Layout
 
@@ -24,9 +24,9 @@ the Ctrl, Alt, or GUI modifiers are held down.
 ```
 # Planck
 
-![Planck](http://i.imgur.com/q2M3uEU.jpg)
+![Planck](https://i.imgur.com/q2M3uEU.jpg)
 
-A compact 40% (12x4) ortholinear keyboard kit made and sold by OLKB and Massdrop. [More info on qmk.fm](http://qmk.fm/planck/)
+A compact 40% (12x4) ortholinear keyboard kit made and sold by OLKB and Massdrop. [More info on qmk.fm](https://qmk.fm/planck/)
 
 * Keyboard Maintainer: [Jack Humbert](https://github.com/jackhumbert)
 * Hardware Supported: Planck PCB rev1, rev2, rev3, rev4, Teensy 2.0

docs/es/README.md

@@ -9,7 +9,7 @@
 
 ## ¿Qué es el firmware QMK?
 
-QMK (*Quantum Mechanical Keyboard*) es una comunidad open source que mantiene el firmware QMK, QMK Toolbox, qmk.fm, y estos documentos. El firmware QMK es un firmware para teclados basado en [tmk\_keyboard](http://github.com/tmk/tmk_keyboard) con algunas características útiles para controladores Atmel AVR, y más específicamente, la [línea de productos OLKB](http://olkb.com), el teclado [ErgoDox EZ](http://www.ergodox-ez.com), y la [línea de productos Clueboard](http://clueboard.co/). También ha sido portado a chips ARM chips usando ChibiOS. Lo puedes utilizar para manejar tu propio teclado ya sea cableado a mano o basado en una PCB personalizada.
+QMK (*Quantum Mechanical Keyboard*) es una comunidad open source que mantiene el firmware QMK, QMK Toolbox, qmk.fm, y estos documentos. El firmware QMK es un firmware para teclados basado en [tmk\_keyboard](https://github.com/tmk/tmk_keyboard) con algunas características útiles para controladores Atmel AVR, y más específicamente, la [línea de productos OLKB](https://olkb.com), el teclado [ErgoDox EZ](https://www.ergodox-ez.com), y la [línea de productos Clueboard](https://clueboard.co/). También ha sido portado a chips ARM chips usando ChibiOS. Lo puedes utilizar para manejar tu propio teclado ya sea cableado a mano o basado en una PCB personalizada.
 
 ## Cómo conseguirlo
 
@@ -29,4 +29,4 @@ Este ejemplo compilaría la revisión `rev4` del teclado `planck` con el keymap
 
 ## Cómo personalizar
 
-QMK tiene montones de [características](es/features.md) para explorar, y una buena cantidad de [documentación de referencia](http://docs.qmk.fm) en la que sumergirse. Se pueden sacar provecho de la mayoría de las características modificando tu [keymap](es/keymap.md), y cambiando los [keycodes](es/keycodes.md).
+QMK tiene montones de [características](es/features.md) para explorar, y una buena cantidad de [documentación de referencia](https://docs.qmk.fm) en la que sumergirse. Se pueden sacar provecho de la mayoría de las características modificando tu [keymap](es/keymap.md), y cambiando los [keycodes](es/keycodes.md).

docs/es/hardware.md

@@ -1,6 +1,6 @@
 # Hardware
 
-QMK es compatible con una variedad de hardware. Si tu procesador puede ser dirigido por [LUFA](http://www.fourwalledcubicle.com/LUFA.php) o [ChibiOS](http://www.chibios.com), probablemente puedes hacer que QMK se ejecute en él. Esta sección explora cómo hacer que QMK se ejecute y se comunique con hardware de todo tipo.
+QMK es compatible con una variedad de hardware. Si tu procesador puede ser dirigido por [LUFA](https://www.fourwalledcubicle.com/LUFA.php) o [ChibiOS](https://www.chibios.org), probablemente puedes hacer que QMK se ejecute en él. Esta sección explora cómo hacer que QMK se ejecute y se comunique con hardware de todo tipo.
 
 * [Pautas de teclados](hardware_keyboard_guidelines.md)
 * [Procesadores AVR](hardware_avr.md)

docs/es/hardware_avr.md

@@ -32,7 +32,7 @@ Esto creará todos los archivos necesarios para tu nuevo teclado, y rellenará l
 
 ## `readme.md`
 
-Aquí es donde describirás tu teclado. Por favor sigue la [Plantilla del readme de teclados](documentation_templates.md#keyboard-readmemd-template) al escribir tu `readme.md`. Te animamos a colocar una imagen en la parte superior de tu `readme.md`. Por favor, utiliza un servicio externo como [Imgur](http://imgur.com) para alojar las imágenes.
+Aquí es donde describirás tu teclado. Por favor sigue la [Plantilla del readme de teclados](documentation_templates.md#keyboard-readmemd-template) al escribir tu `readme.md`. Te animamos a colocar una imagen en la parte superior de tu `readme.md`. Por favor, utiliza un servicio externo como [Imgur](https://imgur.com) para alojar las imágenes.
 
 ## `<keyboard>.c`
 

docs/es/hardware_keyboard_guidelines.md

@@ -98,7 +98,7 @@ Por ejemplo, si tienes un PCB de 60% que soporta ANSI e ISO podría definir los
 
 En un esfuerzo por mantener el tamaño de repo abajo ya no estamos aceptando archivos binarios de cualquier formato, con pocas excepciones. Alojarlos en otro lugar (por ejemplo <https://imgur.com>) y enlazarlos en el `readme.md` es preferible.
 
-Para archivos de hardware (tales como placas, casos, pcb) puedes contribuir a [qmk.fm repo](https://github.com/qmk/qmk.fm) y estarán disponibles en [qmk.fm](http://qmk.fm). Archivos descargables se almacenan en `/<teclado>/` (nombre sigue el mismo formato que el anterior), se sirven en `http://qmk.fm/<teclado>/`, y se generan páginas de `/_pages/<teclado>/` que se sirven en la misma ubicación (Los archivos .md se generan en archivos .html mediante Jekyll). Echa un vistazo a la carpeta `lets_split` para ver un ejemplo.
+Para archivos de hardware (tales como placas, casos, pcb) puedes contribuir a [qmk.fm repo](https://github.com/qmk/qmk.fm) y estarán disponibles en [qmk.fm](https://qmk.fm). Archivos descargables se almacenan en `/<teclado>/` (nombre sigue el mismo formato que el anterior), se sirven en `https://qmk.fm/<teclado>/`, y se generan páginas de `/_pages/<teclado>/` que se sirven en la misma ubicación (Los archivos .md se generan en archivos .html mediante Jekyll). Echa un vistazo a la carpeta `lets_split` para ver un ejemplo.
 
 ## Predeterminados de teclado
 
@@ -140,7 +140,7 @@ El año debe ser el primer año en que se crea el archivo. Si el trabajo se hizo
 
 ## Licencia
 
-El núcleo de QMC está licenciado bajo la [GNU General Public License](https://www.gnu.org/licenses/licenses.en.html). Si estás enviando binarios para los procesadores AVR puedes elegir cualquiera [GPLv2](https://www.gnu.org/licenses/old-licenses/gpl-2.0.html) o [GPLv3](https://www.gnu.org/licenses/gpl.html). Si estás enviando binarios para ARM procesadores debes elegir [GPL Versión 3](https://www.gnu.org/licenses/gpl.html) para cumplir con los [ChibiOS](http://www.chibios.org) licencia GPLv3.
+El núcleo de QMC está licenciado bajo la [GNU General Public License](https://www.gnu.org/licenses/licenses.en.html). Si estás enviando binarios para los procesadores AVR puedes elegir cualquiera [GPLv2](https://www.gnu.org/licenses/old-licenses/gpl-2.0.html) o [GPLv3](https://www.gnu.org/licenses/gpl.html). Si estás enviando binarios para ARM procesadores debes elegir [GPL Versión 3](https://www.gnu.org/licenses/gpl.html) para cumplir con los [ChibiOS](https://www.chibios.org) licencia GPLv3.
 
 Si tu teclado hace uso de la [uGFX](https://gfx.io) características dentro de QMK debes cumplir con la [Licencia de uGFX](https://ugfx.io/license.html), que requiere una licencia comercial separada antes de vender un dispositivo que contiene uGFX.
 

docs/es/newbs.md

@@ -2,7 +2,7 @@
 
 QMK es un poderoso firmware Open Source para tu teclado mecánico. Puedes utilizar QMK para personalizar tu teclado en maneras a la vez simples y potentes. Gente de todos los niveles de habilidad, desde completos novatos hasta expertos programadores, han utilizado con éxito QMK para personalizar sus teclados. Esta guía te ayudará a hacer lo mismo, sin importar tu nivel de habilidad.
 
-¿No estás seguro de si tu teclado puede ejecutar QMK? Si es un teclado mecánico construido por ti mismo probablemente puedas. Damos soporte a [gran número de placas de hobbistas](http://qmk.fm/keyboards/), e incluso si tu teclado actual no pudiera ejecutar QMK no deberías tener problemas encontrando uno que cumpliera tus necesidades.
+¿No estás seguro de si tu teclado puede ejecutar QMK? Si es un teclado mecánico construido por ti mismo probablemente puedas. Damos soporte a [gran número de placas de hobbistas](https://qmk.fm/keyboards/), e incluso si tu teclado actual no pudiera ejecutar QMK no deberías tener problemas encontrando uno que cumpliera tus necesidades.
 
 ## Visión general
 

docs/es/newbs_getting_started.md

@@ -43,7 +43,7 @@ instale el resto.
 
 Necesitarás instalar MSYS2 y Git.
 
-* Sigue las instrucciones de instalación en la [página de MSYS2](http://www.msys2.org).
+* Sigue las instrucciones de instalación en la [página de MSYS2](https://www.msys2.org).
 * Cierra las terminales abiertas de MSYS2 y abre una nueva termial de MSYS2 MinGW 64-bit.
 * Instala Git ejecutando este comando: `pacman -S git`.
 

docs/es/newbs_testing_debugging.md

@@ -10,8 +10,8 @@ Nota: Estos programas no los provée ni están relacionados con QMK.
 
 * [Switch Hitter](https://elitekeyboards.com/switchhitter.php) (Sólo Windows)
 * [Keyboard Viewer](https://www.imore.com/how-use-keyboard-viewer-your-mac) (Sólo Mac)
-* [Keyboard Tester](http://www.keyboardtester.com) (Aplicación web)
-* [Keyboard Checker](http://keyboardchecker.com) (Aplicación web)
+* [Keyboard Tester](https://www.keyboardtester.com) (Aplicación web)
+* [Keyboard Checker](https://keyboardchecker.com) (Aplicación web)
 
 ## Depurando
 

docs/faq_build.md

@@ -17,7 +17,7 @@ or just:
 
 Note that running `make` with `sudo` is generally ***not*** a good idea, and you should use one of the former methods, if possible.
 
-### Linux `udev` Rules
+### Linux `udev` Rules :id=linux-udev-rules
 
 On Linux, you'll need proper privileges to communicate with the bootloader device. You can either use `sudo` when flashing firmware (not recommended), or place [this file](https://github.com/qmk/qmk_firmware/tree/master/util/udev/50-qmk.rules) into `/etc/udev/rules.d/`.
 
@@ -57,8 +57,8 @@ Also see this.
 https://github.com/tmk/tmk_keyboard/issues/150
 
 You can buy a really unique VID:PID here. I don't think you need this for personal use.
-- http://www.obdev.at/products/vusb/license.html
-- http://www.mcselec.com/index.php?page=shop.product_details&flypage=shop.flypage&product_id=92&option=com_phpshop&Itemid=1
+- https://www.obdev.at/products/vusb/license.html
+- https://www.mcselec.com/index.php?page=shop.product_details&flypage=shop.flypage&product_id=92&option=com_phpshop&Itemid=1
 
 ### I just flashed my keyboard and it does nothing/keypresses don't register - it's also ARM (rev6 planck, clueboard 60, hs60v2, etc...) (Feb 2019)
 Due to how EEPROM works on ARM based chips, saved settings may no longer be valid.  This affects the default layers, and *may*, under certain circumstances we are still figuring out, make the keyboard unusable.  Resetting the EEPROM will correct this.

docs/faq_debug.md

@@ -2,7 +2,94 @@
 
 This page details various common questions people have about troubleshooting their keyboards.
 
-# Debug Console
+## Debugging :id=debugging
+
+Your keyboard will output debug information if you have `CONSOLE_ENABLE = yes` in your `rules.mk`. By default the output is very limited, but you can turn on debug mode to increase the amount of debug output. Use the `DEBUG` keycode in your keymap, use the [Command](feature_command.md) feature to enable debug mode, or add the following code to your keymap.
+
+```c
+void keyboard_post_init_user(void) {
+  // Customise these values to desired behaviour
+  debug_enable=true;
+  debug_matrix=true;
+  //debug_keyboard=true;
+  //debug_mouse=true;
+}
+```
+
+## Debugging Tools
+
+There are two different tools you can use to debug your keyboard.
+
+### Debugging With QMK Toolbox
+
+For compatible platforms, [QMK Toolbox](https://github.com/qmk/qmk_toolbox) can be used to display debug messages from your keyboard.
+
+### Debugging With hid_listen
+
+Prefer a terminal based solution? [hid_listen](https://www.pjrc.com/teensy/hid_listen.html), provided by PJRC, can also be used to display debug messages. Prebuilt binaries for Windows,Linux,and MacOS are available.
+
+## Sending Your Own Debug Messages
+
+Sometimes it's useful to print debug messages from within your [custom code](custom_quantum_functions.md). Doing so is pretty simple. Start by including `print.h` at the top of your file:
+
+```c
+#include "print.h"
+```
+
+After that you can use a few different print functions:
+
+* `print("string")`: Print a simple string.
+* `uprintf("%s string", var)`: Print a formatted string
+* `dprint("string")` Print a simple string, but only when debug mode is enabled
+* `dprintf("%s string", var)`: Print a formatted string, but only when debug mode is enabled
+
+## Debug Examples
+
+Below is a collection of real world debugging examples. For additional information, refer to [Debugging/Troubleshooting QMK](faq_debug.md).
+
+### Which matrix position is this keypress?
+
+When porting, or when attempting to diagnose pcb issues, it can be useful to know if a keypress is scanned correctly. To enable logging for this scenario, add the following code to your keymaps `keymap.c`
+
+```c
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+  // If console is enabled, it will print the matrix position and status of each key pressed
+#ifdef CONSOLE_ENABLE
+    uprintf("KL: kc: 0x%04X, col: %u, row: %u, pressed: %b, time: %u, interrupt: %b, count: %u\n", keycode, record->event.key.col, record->event.key.row, record->event.pressed, record->event.time, record->tap.interrupted, record->tap.count);
+#endif 
+  return true;
+}
+```
+
+Example output
+```text
+Waiting for device:.......
+Listening:
+KL: kc: 169, col: 0, row: 0, pressed: 1
+KL: kc: 169, col: 0, row: 0, pressed: 0
+KL: kc: 174, col: 1, row: 0, pressed: 1
+KL: kc: 174, col: 1, row: 0, pressed: 0
+KL: kc: 172, col: 2, row: 0, pressed: 1
+KL: kc: 172, col: 2, row: 0, pressed: 0
+```
+
+### How long did it take to scan for a keypress?
+
+When testing performance issues, it can be useful to know the frequency at which the switch matrix is being scanned. To enable logging for this scenario, add the following code to your keymaps `config.h`
+
+```c
+#define DEBUG_MATRIX_SCAN_RATE
+```
+
+Example output
+```text
+  > matrix scan frequency: 315
+  > matrix scan frequency: 313
+  > matrix scan frequency: 316
+  > matrix scan frequency: 316
+  > matrix scan frequency: 316
+  > matrix scan frequency: 316
+```
 
 ## `hid_listen` Can't Recognize Device
 When debug console of your device is not ready you will see like this:
@@ -11,7 +98,7 @@ When debug console of your device is not ready you will see like this:
 Waiting for device:.........
 ```
 
-once the device is plugged in then *hid_listen* finds it you will get this message:
+Once the device is plugged in then *hid_listen* finds it you will get this message:
 
 ```
 Waiting for new device:.........................
@@ -20,129 +107,12 @@ Listening:
 
 If you can't get this 'Listening:' message try building with `CONSOLE_ENABLE=yes` in [Makefile]
 
-You may need privilege to access the device on OS like Linux.
-- try `sudo hid_listen`
+You may need privileges to access the device an OS like Linux. Try `sudo hid_listen`.
 
 ## Can't Get Message on Console
 Check:
 - *hid_listen* finds your device. See above.
-- Enable debug with pressing **Magic**+d. See [Magic Commands](https://github.com/tmk/tmk_keyboard#magic-commands).
-- set `debug_enable=true`. See [Testing and Debugging](newbs_testing_debugging.md#debugging)
-- try using 'print' function instead of debug print. See **common/print.h**.
-- disconnect other devices with console function. See [Issue #97](https://github.com/tmk/tmk_keyboard/issues/97).
-
-***
-
-# Miscellaneous
-## Safety Considerations
-
-You probably don't want to "brick" your keyboard, making it impossible
-to rewrite firmware onto it.  Here are some of the parameters to show
-what things are (and likely aren't) too risky.
-
-- If your keyboard map does not include RESET, then, to get into DFU
-  mode, you will need to press the reset button on the PCB, which
-  requires unscrewing the bottom.
-- Messing with tmk_core / common files might make the keyboard
-  inoperable
-- Too large a .hex file is trouble; `make dfu` will erase the block,
-  test the size (oops, wrong order!), which errors out, failing to
-  flash the keyboard, leaving it in DFU mode.
-  - To this end, note that the maximum .hex file size on Planck is
-    7000h (28672 decimal)
-
-```
-Linking: .build/planck_rev4_cbbrowne.elf                                                            [OK]
-Creating load file for Flash: .build/planck_rev4_cbbrowne.hex                                       [OK]
-
-Size after:
-   text    data     bss     dec     hex filename
-      0   22396       0   22396    577c planck_rev4_cbbrowne.hex
-```
-
-  - The above file is of size 22396/577ch, which is less than
-    28672/7000h
-  - As long as you have a suitable alternative .hex file around, you
-    can retry, loading that one
-  - Some of the options you might specify in your keyboard's Makefile
-    consume extra memory; watch out for BOOTMAGIC_ENABLE,
-    MOUSEKEY_ENABLE, EXTRAKEY_ENABLE, CONSOLE_ENABLE, API_SYSEX_ENABLE
-- DFU tools do /not/ allow you to write into the bootloader (unless
-  you throw in extra fruit salad of options), so there is little risk
-  there.
-- EEPROM has around a 100000 write cycle.  You shouldn't rewrite the
-  firmware repeatedly and continually; that'll burn the EEPROM
-  eventually.
-
-## NKRO Doesn't work
-First you have to compile firmware with this build option `NKRO_ENABLE` in **Makefile**.
-
-Try `Magic` **N** command(`LShift+RShift+N` by default) when **NKRO** still doesn't work. You can use this command to toggle between **NKRO** and **6KRO** mode temporarily. In some situations **NKRO** doesn't work you need to switch to **6KRO** mode, in particular when you are in BIOS.
-
-If your firmware built with `BOOTMAGIC_ENABLE` you need to turn its switch on by `BootMagic` **N** command(`Space+N` by default). This setting is stored in EEPROM and kept over power cycles.
-
-https://github.com/tmk/tmk_keyboard#boot-magic-configuration---virtual-dip-switch
-
-
-## TrackPoint Needs Reset Circuit (PS/2 Mouse Support)
-Without reset circuit you will have inconsistent result due to improper initialize of the hardware. See circuit schematic of TPM754.
-
-- http://geekhack.org/index.php?topic=50176.msg1127447#msg1127447
-- http://www.mikrocontroller.net/attachment/52583/tpm754.pdf
-
-
-## Can't Read Column of Matrix Beyond 16
-Use `1UL<<16` instead of `1<<16` in `read_cols()` in [matrix.h] when your columns goes beyond 16.
-
-In C `1` means one of [int] type which is [16 bit] in case of AVR so you can't shift left more than 15. You will get unexpected zero when you say `1<<16`. You have to use [unsigned long] type with `1UL`.
-
-http://deskthority.net/workshop-f7/rebuilding-and-redesigning-a-classic-thinkpad-keyboard-t6181-60.html#p146279
-
-## Special Extra Key Doesn't Work (System, Audio Control Keys)
-You need to define `EXTRAKEY_ENABLE` in `rules.mk` to use them in QMK.
-
-```
-EXTRAKEY_ENABLE = yes          # Audio control and System control
-```
-
-## Wakeup from Sleep Doesn't Work
-
-In Windows check `Allow this device to wake the computer` setting in Power **Management property** tab of **Device Manager**. Also check BIOS setting.
-
-Pressing any key during sleep should wake host.
-
-## Using Arduino?
-
-**Note that Arduino pin naming is different from actual chip.** For example, Arduino pin `D0` is not `PD0`. Check circuit with its schematics yourself.
-
-- http://arduino.cc/en/uploads/Main/arduino-leonardo-schematic_3b.pdf
-- http://arduino.cc/en/uploads/Main/arduino-micro-schematic.pdf
-
-Arduino Leonardo and micro have **ATMega32U4** and can be used for TMK, though Arduino bootloader may be a problem.
-
-## Enabling JTAG
-
-By default, the JTAG debugging interface is disabled as soon as the keyboard starts up. JTAG-capable MCUs come from the factory with the `JTAGEN` fuse set, and it takes over certain pins of the MCU that the board may be using for the switch matrix, LEDs, etc.
-
-If you would like to keep JTAG enabled, just add the following to your `config.h`:
-
-```c
-#define NO_JTAG_DISABLE
-```
-
-## USB 3 Compatibility
-I heard some people have a problem with USB 3 port, try USB 2 port.
-
-
-## Mac Compatibility
-### OS X 10.11 and Hub
-https://geekhack.org/index.php?topic=14290.msg1884034#msg1884034
-
-
-## Problem on BIOS (UEFI)/Resume (Sleep & Wake)/Power Cycles
-Some people reported their keyboard stops working on BIOS and/or after resume(power cycles).
-
-As of now root of its cause is not clear but some build options seem to be related. In Makefile try to disable those options like `CONSOLE_ENABLE`, `NKRO_ENABLE`, `SLEEP_LED_ENABLE` and/or others.
-
-https://github.com/tmk/tmk_keyboard/issues/266
-https://geekhack.org/index.php?topic=41989.msg1967778#msg1967778
+- Enable debug by pressing **Magic**+d. See [Magic Commands](https://github.com/tmk/tmk_keyboard#magic-commands).
+- Set `debug_enable=true`. See [Debugging](#debugging)
+- Try using `print` function instead of debug print. See **common/print.h**.
+- Disconnect other devices with console function. See [Issue #97](https://github.com/tmk/tmk_keyboard/issues/97).

docs/faq_general.md

@@ -34,7 +34,7 @@ Additionally, you can find additional `git` and GitHub related links [here](newb
 
 Awesome! Open up a Pull Request for it. We'll review the code, and merge it!
 
-### What if I want to do brand it with `QMK`?
+### What if I want to brand it with `QMK`?
 
 That's amazing! We would love to assist you with that!
 

docs/faq_keymap.md

@@ -11,7 +11,7 @@ Keycodes are actually defined in [common/keycode.h](https://github.com/qmk/qmk_f
 
 There are 3 standard keyboard layouts in use around the world- ANSI, ISO, and JIS. North America primarily uses ANSI, Europe and Africa primarily use ISO, and Japan uses JIS. Regions not mentioned typically use either ANSI or ISO. The keycodes corresponding to these layouts are shown here:
 
-<!-- Source for this image: http://www.keyboard-layout-editor.com/#/gists/bf431647d1001cff5eff20ae55621e9a -->
+<!-- Source for this image: https://www.keyboard-layout-editor.com/#/gists/bf431647d1001cff5eff20ae55621e9a -->
 ![Keyboard Layout Image](https://i.imgur.com/5wsh5wM.png)
 
 ## How Can I Make Custom Names For Complex Keycodes?
@@ -42,8 +42,8 @@ The key found on most modern keyboards that is located between `KC_RGUI` and `KC
 Use keycode for Print Screen(`KC_PSCREEN` or `KC_PSCR`) instead of `KC_SYSREQ`. Key combination of 'Alt + Print Screen' is recognized as 'System request'.
 
 See [issue #168](https://github.com/tmk/tmk_keyboard/issues/168) and
-* http://en.wikipedia.org/wiki/Magic_SysRq_key
-* http://en.wikipedia.org/wiki/System_request
+* https://en.wikipedia.org/wiki/Magic_SysRq_key
+* https://en.wikipedia.org/wiki/System_request
 
 ## Power Keys Aren't Working
 
@@ -60,13 +60,13 @@ Modifier keys or layers can be stuck unless layer switching is configured proper
 For Modifier keys and layer actions you have to place `KC_TRANS` on same position of destination layer to  unregister the modifier key or return to previous layer on release event.
 
 * https://github.com/tmk/tmk_core/blob/master/doc/keymap.md#31-momentary-switching
-* http://geekhack.org/index.php?topic=57008.msg1492604#msg1492604
+* https://geekhack.org/index.php?topic=57008.msg1492604#msg1492604
 * https://github.com/tmk/tmk_keyboard/issues/248
 
 
 ## Mechanical Lock Switch Support
 
-This feature is for *mechanical lock switch* like [this Alps one](http://deskthority.net/wiki/Alps_SKCL_Lock). You can enable it by adding this to your `config.h`:
+This feature is for *mechanical lock switch* like [this Alps one](https://deskthority.net/wiki/Alps_SKCL_Lock). You can enable it by adding this to your `config.h`:
 
 ```
 #define LOCKING_SUPPORT_ENABLE

docs/faq_misc.md

@@ -0,0 +1,117 @@
+# Miscellaneous FAQ
+
+## How do I test my keyboard? :id=testing
+
+Testing your keyboard is usually pretty straightforward. Press every single key and make sure it sends the keys you expect. You can use [QMK Configurator](https://config.qmk.fm/#/test/)'s test mode to check your keyboard, even if it doesn't run QMK.
+
+## Safety Considerations
+
+You probably don't want to "brick" your keyboard, making it impossible
+to rewrite firmware onto it.  Here are some of the parameters to show
+what things are (and likely aren't) too risky.
+
+- If your keyboard map does not include RESET, then, to get into DFU
+  mode, you will need to press the reset button on the PCB, which
+  requires unscrewing the bottom.
+- Messing with tmk_core / common files might make the keyboard
+  inoperable
+- Too large a .hex file is trouble; `make dfu` will erase the block,
+  test the size (oops, wrong order!), which errors out, failing to
+  flash the keyboard, leaving it in DFU mode.
+  - To this end, note that the maximum .hex file size on e.g. Planck
+    is 7000h (28672 decimal)
+
+```
+Linking: .build/planck_rev4_cbbrowne.elf                                                            [OK]
+Creating load file for Flash: .build/planck_rev4_cbbrowne.hex                                       [OK]
+
+Size after:
+   text    data     bss     dec     hex filename
+      0   22396       0   22396    577c planck_rev4_cbbrowne.hex
+```
+
+  - The above file is of size 22396/577ch, which is less than
+    28672/7000h
+  - As long as you have a suitable alternative .hex file around, you
+    can retry, loading that one
+  - Some of the options you might specify in your keyboard's Makefile
+    consume extra memory; watch out for BOOTMAGIC_ENABLE,
+    MOUSEKEY_ENABLE, EXTRAKEY_ENABLE, CONSOLE_ENABLE, API_SYSEX_ENABLE
+- DFU tools do /not/ allow you to write into the bootloader (unless
+  you throw in an extra fruit salad of options), so there is little risk
+  there.
+- EEPROM has around a 100000 (100k) write cycle.  You shouldn't rewrite
+  the firmware repeatedly and continually; that'll burn the EEPROM
+  eventually.
+
+## NKRO Doesn't work
+First you have to compile firmware with the build option `NKRO_ENABLE` in **Makefile**.
+
+Try `Magic` **N** command(`LShift+RShift+N` by default) when **NKRO** still doesn't work. You can use this command to toggle between **NKRO** and **6KRO** mode temporarily. In some situations **NKRO** doesn't work and you will need to switch to **6KRO** mode, in particular when you are in BIOS.
+
+If your firmware was built with `BOOTMAGIC_ENABLE` you need to turn its switch on by `BootMagic` **N** command(`Space+N` by default). This setting is stored in EEPROM and kept over power cycles.
+
+https://github.com/tmk/tmk_keyboard#boot-magic-configuration---virtual-dip-switch
+
+
+## TrackPoint Needs Reset Circuit (PS/2 Mouse Support)
+Without reset circuit you will have inconsistent result due to improper initialization of the hardware. See circuit schematic of TPM754:
+
+- https://geekhack.org/index.php?topic=50176.msg1127447#msg1127447
+- https://www.mikrocontroller.net/attachment/52583/tpm754.pdf
+
+
+## Can't Read Column of Matrix Beyond 16
+Use `1UL<<16` instead of `1<<16` in `read_cols()` in [matrix.h] when your columns goes beyond 16.
+
+In C `1` means one of [int] type which is [16 bit] in case of AVR, so you can't shift left more than 15. Thus, calculating `1<<16` will unexpectedly equal zero. To work around this, you have to use [unsigned long] type with `1UL`.
+
+https://deskthority.net/workshop-f7/rebuilding-and-redesigning-a-classic-thinkpad-keyboard-t6181-60.html#p146279
+
+## Special Extra Key Doesn't Work (System, Audio Control Keys)
+You need to define `EXTRAKEY_ENABLE` in `rules.mk` to use them in QMK.
+
+```
+EXTRAKEY_ENABLE = yes          # Audio control and System control
+```
+
+## Wake from Sleep Doesn't Work
+
+In Windows check `Allow this device to wake the computer` setting in **Power Management** property tab of **Device Manager**. Also check your BIOS settings. Pressing any key during sleep should wake host.
+
+## Using Arduino?
+
+**Note that Arduino pin naming is different from actual chip.** For example, Arduino pin `D0` is not `PD0`. Check circuit with its schematics yourself.
+
+- https://arduino.cc/en/uploads/Main/arduino-leonardo-schematic_3b.pdf
+- https://arduino.cc/en/uploads/Main/arduino-micro-schematic.pdf
+
+Arduino Leonardo and micro have **ATMega32U4** and can be used for TMK, though Arduino bootloader may be a problem.
+
+## Enabling JTAG
+
+By default, the JTAG debugging interface is disabled as soon as the keyboard starts up. JTAG-capable MCUs come from the factory with the `JTAGEN` fuse set, and it takes over certain pins of the MCU that the board may be using for the switch matrix, LEDs, etc.
+
+If you would like to keep JTAG enabled, just add the following to your `config.h`:
+
+```c
+#define NO_JTAG_DISABLE
+```
+
+## USB 3 Compatibility
+Some problems can be fixed by switching from a USB 3.x port to a USB 2.0 port.
+
+
+## Mac Compatibility
+### OS X 10.11 and Hub
+See here: https://geekhack.org/index.php?topic=14290.msg1884034#msg1884034
+
+
+## Problem in BIOS (UEFI) Setup/Resume (Sleep & Wake)/Power Cycles
+Some people reported their keyboard stops working in BIOS and/or after resume(power cycles).
+
+As of now the root cause is not clear, but some build options seem to be related. In Makefile, try to disable options like `CONSOLE_ENABLE`, `NKRO_ENABLE`, `SLEEP_LED_ENABLE` and/or others.
+
+More info:
+- https://github.com/tmk/tmk_keyboard/issues/266
+- https://geekhack.org/index.php?topic=41989.msg1967778#msg1967778

docs/feature_haptic_feedback.md

@@ -39,7 +39,7 @@ Not all keycodes below will work depending on which haptic mechanism you have ch
 
 First you will need a build a circuit to drive the solenoid through a mosfet as most MCU will not be able to provide the current needed to drive the coil in the solenoid.
 
-[Wiring diagram provided by Adafruit](https://playground.arduino.cc/uploads/Learning/solenoid_driver.pdf)
+[Wiring diagram provided by Adafruit](https://cdn-shop.adafruit.com/product-files/412/solenoid_driver.pdf)
 
 
 | Settings                   | Default              | Description                                           |

docs/feature_led_matrix.md

@@ -10,9 +10,11 @@ If you want to use RGB LED's you should use the [RGB Matrix Subsystem](feature_r
 
 There is basic support for addressable LED matrix lighting with the I2C IS31FL3731 RGB controller. To enable it, add this to your `rules.mk`:
 
-    LED_MATRIX_ENABLE = yes
-    LED_MATRIX_DRIVER = IS31FL3731
-    
+```make
+LED_MATRIX_ENABLE = yes
+LED_MATRIX_DRIVER = IS31FL3731
+```
+
 You can use between 1 and 4 IS31FL3731 IC's. Do not specify `LED_DRIVER_ADDR_<N>` defines for IC's that are not present on your keyboard. You can define the following items in `config.h`:
 
 | Variable | Description | Default |
@@ -20,7 +22,7 @@ You can use between 1 and 4 IS31FL3731 IC's. Do not specify `LED_DRIVER_ADDR_<N>
 | `ISSI_TIMEOUT` | (Optional) How long to wait for i2c messages | 100 |
 | `ISSI_PERSISTENCE` | (Optional) Retry failed messages this many times | 0 |
 | `LED_DRIVER_COUNT` | (Required) How many LED driver IC's are present | |
-| `LED_DRIVER_LED_COUNT` | (Required) How many LED lights are present across all drivers | |
+| `DRIVER_LED_TOTAL` | (Required) How many LED lights are present across all drivers | |
 | `LED_DRIVER_ADDR_1` | (Required) Address for the first LED driver | |
 | `LED_DRIVER_ADDR_2` | (Optional) Address for the second LED driver | |
 | `LED_DRIVER_ADDR_3` | (Optional) Address for the third LED driver | |
@@ -28,35 +30,40 @@ You can use between 1 and 4 IS31FL3731 IC's. Do not specify `LED_DRIVER_ADDR_<N>
 
 Here is an example using 2 drivers.
 
-	// This is a 7-bit address, that gets left-shifted and bit 0
-	// set to 0 for write, 1 for read (as per I2C protocol)
-	// The address will vary depending on your wiring:
-	// 0b1110100 AD <-> GND
-	// 0b1110111 AD <-> VCC
-	// 0b1110101 AD <-> SCL
-	// 0b1110110 AD <-> SDA
-	#define LED_DRIVER_ADDR_1 0b1110100
-	#define LED_DRIVER_ADDR_2 0b1110110
+```c
+// This is a 7-bit address, that gets left-shifted and bit 0
+// set to 0 for write, 1 for read (as per I2C protocol)
+// The address will vary depending on your wiring:
+// 0b1110100 AD <-> GND
+// 0b1110111 AD <-> VCC
+// 0b1110101 AD <-> SCL
+// 0b1110110 AD <-> SDA
+#define LED_DRIVER_ADDR_1 0b1110100
+#define LED_DRIVER_ADDR_2 0b1110110
 
-	#define LED_DRIVER_COUNT 2
-	#define LED_DRIVER_1_LED_COUNT 25
-	#define LED_DRIVER_2_LED_COUNT 24
-	#define LED_DRIVER_LED_COUNT LED_DRIVER_1_LED_TOTAL + LED_DRIVER_2_LED_TOTAL
+#define LED_DRIVER_COUNT 2
+#define LED_DRIVER_1_LED_COUNT 25
+#define LED_DRIVER_2_LED_COUNT 24
+#define DRIVER_LED_TOTAL LED_DRIVER_1_LED_TOTAL + LED_DRIVER_2_LED_TOTAL
+```
 
 Currently only 2 drivers are supported, but it would be trivial to support all 4 combinations.
 
 Define these arrays listing all the LEDs in your `<keyboard>.c`:
 
-	const is31_led g_is31_leds[DRIVER_LED_TOTAL] = {
-	/* Refer to IS31 manual for these locations
-	 *   driver
-	 *   |  LED address
-	 *   |  | */
-	    {0, C3_3},
-	    ....
-	}
+```c
+    const is31_led g_is31_leds[DRIVER_LED_TOTAL] = {
+    /* Refer to IS31 manual for these locations
+     *    driver
+     *    |  LED address
+     *    |  | */
+        { 0, C1_1  },
+        { 0, C1_15 },
+       // ...
+    }
+```
 
-Where `Cx_y` is the location of the LED in the matrix defined by [the datasheet](http://www.issi.com/WW/pdf/31FL3731.pdf) and the header file `drivers/issi/is31fl3731-simple.h`. The `driver` is the index of the driver you defined in your `config.h` (`0`, `1`, `2`, or `3` ).
+Where `Cx_y` is the location of the LED in the matrix defined by [the datasheet](https://www.issi.com/WW/pdf/31FL3731.pdf) and the header file `drivers/issi/is31fl3731-simple.h`. The `driver` is the index of the driver you defined in your `config.h` (`0`, `1`, `2`, or `3` ).
 
 ## Keycodes
 
@@ -66,26 +73,28 @@ All LED matrix keycodes are currently shared with the [backlight system](feature
 
 Currently no LED matrix effects have been created.
 
-## Custom layer effects
+## Custom Layer Effects
 
 Custom layer effects can be done by defining this in your `<keyboard>.c`:
 
-    void led_matrix_indicators_kb(void) {
-        led_matrix_set_index_value(index, value);
-    }
+```c
+void led_matrix_indicators_kb(void) {
+    led_matrix_set_index_value(index, value);
+}
+```
 
 A similar function works in the keymap as `led_matrix_indicators_user`.
 
-## Suspended state
+## Suspended State
 
 To use the suspend feature, add this to your `<keyboard>.c`:
 
-	void suspend_power_down_kb(void)
-	{
-	    led_matrix_set_suspend_state(true);
-	}
+```c
+void suspend_power_down_kb(void) {
+    led_matrix_set_suspend_state(true);
+}
 
-	void suspend_wakeup_init_kb(void)
-	{
-	    led_matrix_set_suspend_state(false);
-	}
+void suspend_wakeup_init_kb(void) {
+    led_matrix_set_suspend_state(false);
+}
+```