Tidy up spi_master includes (#13053 )

Update noroadsleft userspace and keymaps (2021-06-02) (#13086 )
Fix up WS2812 SPI driver on F072. (#13022 )
2021-06-03 16:26:41 +10:00 · 2021-06-02 23:06:30 -07:00 · 2021-06-03 09:48:16 +10:00 · 2021-06-03 06:59:52 +10:00 · 2021-06-01 18:12:17 +10:00 · 2021-05-31 21:56:23 -07:00
96 changed files with 5932 additions and 81 deletions
--- a/docs/ws2812_driver.md
+++ b/docs/ws2812_driver.md
@ -72,7 +72,9 @@ WS2812_DRIVER = spi
 Configure the hardware via your config.h:
 ```c
 #define WS2812_SPI SPID1 // default: SPID1
-#define WS2812_SPI_MOSI_PAL_MODE 5 // Pin "alternate function", see the respective datasheet for the appropriate values for your MCU. default: 5
+#define WS2812_SPI_MOSI_PAL_MODE 5 // MOSI pin "alternate function", see the respective datasheet for the appropriate values for your MCU. default: 5
+#define WS2812_SPI_SCK_PIN B3 // Required for F072, may be for others -- SCK pin, see the respective datasheet for the appropriate values for your MCU. default: unspecified
+#define WS2812_SPI_SCK_PAL_MODE 5 // SCK pin "alternate function", see the respective datasheet for the appropriate values for your MCU. default: 5
 ```

 You must also turn on the SPI feature in your halconf.h and mcuconf.h
@ -100,11 +102,11 @@ Only divisors of 2, 4, 8, 16, 32, 64, 128 and 256 are supported by hardware.

 While not an exhaustive list, the following table provides the scenarios that have been partially validated:

-| | SPI1 | SPI2 | SPI3 |
-|-|-|-|-|
-| f072 | ? | B15 :heavy_check_mark: | N/A |
-| f103 | A7 :heavy_check_mark: | B15 :heavy_check_mark: | N/A |
-| f303 | A7 :heavy_check_mark: B5 :heavy_check_mark:  | B15 :heavy_check_mark: | B5 :heavy_check_mark: |
+|      | SPI1                                        | SPI2                                    | SPI3                  |
+|------|---------------------------------------------|-----------------------------------------|-----------------------|
+| f072 | ?                                           | B15 :heavy_check_mark: (needs SCK: B13) | N/A                   |
+| f103 | A7 :heavy_check_mark:                       | B15 :heavy_check_mark:                  | N/A                   |
+| f303 | A7 :heavy_check_mark: B5 :heavy_check_mark: | B15 :heavy_check_mark:                  | B5 :heavy_check_mark: |

 *Other supported ChibiOS boards and/or pins may function, it will be highly chip and configuration dependent.*

--- a/drivers/avr/spi_master.c
+++ b/drivers/avr/spi_master.c
@ -14,10 +14,8 @@
 *  along with this program.  If not, see <https://www.gnu.org/licenses/>.
 */

-#include <avr/io.h>
-
 #include "spi_master.h"
-#include "quantum.h"
+
 #include "timer.h"

 #if defined(__AVR_AT90USB162__) || defined(__AVR_ATmega16U2__) || defined(__AVR_ATmega32U2__) || defined(__AVR_ATmega16U4__) || defined(__AVR_ATmega32U4__) || defined(__AVR_AT90USB646__) || defined(__AVR_AT90USB647__) || defined(__AVR_AT90USB1286__) || defined(__AVR_AT90USB1287__)
--- a/drivers/avr/spi_master.h
+++ b/drivers/avr/spi_master.h
@ -16,7 +16,9 @@

 #pragma once

-#include "quantum.h"
+#include <stdbool.h>
+
+#include "gpio.h"

 typedef int16_t spi_status_t;

--- a/drivers/chibios/spi_master.c
+++ b/drivers/chibios/spi_master.c
@ -15,7 +15,7 @@
 */

 #include "spi_master.h"
-#include "quantum.h"
+
 #include "timer.h"

 static pin_t     currentSlavePin = NO_PIN;
--- a/drivers/chibios/spi_master.h
+++ b/drivers/chibios/spi_master.h
@ -18,7 +18,9 @@

 #include <ch.h>
 #include <hal.h>
-#include "quantum.h"
+#include <stdbool.h>
+
+#include "gpio.h"

 #ifndef SPI_DRIVER
 #    define SPI_DRIVER SPID2
--- a/drivers/chibios/ws2812_spi.c
+++ b/drivers/chibios/ws2812_spi.c
@ -16,19 +16,23 @@
 #    define WS2812_SPI_MOSI_PAL_MODE 5
 #endif

+#ifndef WS2812_SPI_SCK_PAL_MODE
+#    define WS2812_SPI_SCK_PAL_MODE 5
+#endif
+
 // Push Pull or Open Drain Configuration
 // Default Push Pull
 #ifndef WS2812_EXTERNAL_PULLUP
 #    if defined(USE_GPIOV1)
-#        define WS2812_OUTPUT_MODE PAL_MODE_STM32_ALTERNATE_PUSHPULL
+#        define WS2812_MOSI_OUTPUT_MODE PAL_MODE_STM32_ALTERNATE_PUSHPULL
 #    else
-#        define WS2812_OUTPUT_MODE PAL_MODE_ALTERNATE(WS2812_SPI_MOSI_PAL_MODE) | PAL_STM32_OTYPE_PUSHPULL
+#        define WS2812_MOSI_OUTPUT_MODE PAL_MODE_ALTERNATE(WS2812_SPI_MOSI_PAL_MODE) | PAL_STM32_OTYPE_PUSHPULL
 #    endif
 #else
 #    if defined(USE_GPIOV1)
-#        define WS2812_OUTPUT_MODE PAL_MODE_STM32_ALTERNATE_OPENDRAIN
+#        define WS2812_MOSI_OUTPUT_MODE PAL_MODE_STM32_ALTERNATE_OPENDRAIN
 #    else
-#        define WS2812_OUTPUT_MODE PAL_MODE_ALTERNATE(WS2812_SPI_MOSI_PAL_MODE) | PAL_STM32_OTYPE_OPENDRAIN
+#        define WS2812_MOSI_OUTPUT_MODE PAL_MODE_ALTERNATE(WS2812_SPI_MOSI_PAL_MODE) | PAL_STM32_OTYPE_OPENDRAIN
 #    endif
 #endif

@ -63,6 +67,12 @@
 #    define WS2812_SPI_BUFFER_MODE 0  // normal buffer
 #endif

+#if defined(USE_GPIOV1)
+#    define WS2812_SCK_OUTPUT_MODE PAL_MODE_STM32_ALTERNATE_PUSHPULL
+#else
+#    define WS2812_SCK_OUTPUT_MODE PAL_MODE_ALTERNATE(WS2812_SPI_SCK_PAL_MODE) | PAL_STM32_OTYPE_PUSHPULL
+#endif
+
 #define BYTES_FOR_LED_BYTE 4
 #define NB_COLORS 3
 #define BYTES_FOR_LED (BYTES_FOR_LED_BYTE * NB_COLORS)
@ -109,7 +119,11 @@ static void set_led_color_rgb(LED_TYPE color, int pos) {
 }

 void ws2812_init(void) {
-    palSetLineMode(RGB_DI_PIN, WS2812_OUTPUT_MODE);
+    palSetLineMode(RGB_DI_PIN, WS2812_MOSI_OUTPUT_MODE);
+
+#ifdef WS2812_SPI_SCK_PIN
+    palSetLineMode(WS2812_SPI_SCK_PIN, WS2812_SCK_OUTPUT_MODE);
+#endif  // WS2812_SPI_SCK_PIN

    // TODO: more dynamic baudrate
    static const SPIConfig spicfg = {WS2812_SPI_BUFFER_MODE, NULL, PAL_PORT(RGB_DI_PIN), PAL_PAD(RGB_DI_PIN), WS2812_SPI_DIVISOR};
--- a/keyboards/aeboards/ext65/rev2/config.h
+++ b/keyboards/aeboards/ext65/rev2/config.h
@ -51,6 +51,8 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 //SPI
 #define WS2812_SPI SPID2
 #define WS2812_SPI_MOSI_PAL_MODE 0
+#define WS2812_SPI_SCK_PAL_MODE 0
+#define WS2812_SPI_SCK_PIN B13
 #define WS2812_EXTERNAL_PULLUP

 // I2C OLED defines
--- a/keyboards/bop/bop.c
+++ b/keyboards/bop/bop.c
@ -0,0 +1,17 @@
+/* Copyright 2021 Brandon Lewis
+  * 
+  * This program is free software: you can redistribute it and/or modify 
+  * it under the terms of the GNU General Public License as published by 
+  * the Free Software Foundation, either version 2 of the License, or 
+  * (at your option) any later version. 
+  * 
+  * This program is distributed in the hope that it will be useful, 
+  * but WITHOUT ANY WARRANTY; without even the implied warranty of 
+  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the 
+  * GNU General Public License for more details. 
+  * 
+  * You should have received a copy of the GNU General Public License 
+  * along with this program.  If not, see <http://www.gnu.org/licenses/>. 
+  */ 
+
+#include "bop.h"
--- a/keyboards/bop/bop.h
+++ b/keyboards/bop/bop.h
@ -0,0 +1,35 @@
+/* Copyright 2021 Brandon Lewis
+  * 
+  * This program is free software: you can redistribute it and/or modify 
+  * it under the terms of the GNU General Public License as published by 
+  * the Free Software Foundation, either version 2 of the License, or 
+  * (at your option) any later version. 
+  * 
+  * This program is distributed in the hope that it will be useful, 
+  * but WITHOUT ANY WARRANTY; without even the implied warranty of 
+  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the 
+  * GNU General Public License for more details. 
+  * 
+  * You should have received a copy of the GNU General Public License 
+  * along with this program.  If not, see <http://www.gnu.org/licenses/>. 
+  */ 
+
+#pragma once
+
+#include "quantum.h"
+
+#define LAYOUT( \
+	K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, K014, K015, K016, K017, K018, K019, \
+	K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114, K115, K116, K117, K118, K119, \
+	K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213, K214, K215, K216, K217, K218, K219, \
+	K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, K313, K314, K315, K316, K317, K318, K319, \
+	K400, K401, K402, K403, K404, K405, K406, K407, K408, K409, K410, K411, K412, K413, K414, K415, K416, K417, K418, K419, \
+	K500, K501, K502, K503, K504, K505, K506, K507, K508, K509, K510, K511, K512, K513, K514, K515, K516, K517, K518, K519  \
+) { \
+	{ K000,  K001,  K002,  K003,  K004,  K005,  K006,  K007,  K008,  K009,  K010,  K011,  K012,  K013,  K014,  K015,  K016,  K017,  K018,  K019 }, \
+	{ K100,  K101,  K102,  K103,  K104,  K105,  K106,  K107,  K108,  K109,  K110,  K111,  K112,  K113,  K114,  K115,  K116,  K117,  K118,  K119 }, \
+	{ K200,  K201,  K202,  K203,  K204,  K205,  K206,  K207,  K208,  K209,  K210,  K211,  K212,  K213,  K214,  K215,  K216,  K217,  K218,  K219 }, \
+	{ K300,  K301,  K302,  K303,  K304,  K305,  K306,  K307,  K308,  K309,  K310,  K311,  K312,  K313,  K314,  K315,  K316,  K317,  K318,  K319 }, \
+	{ K400,  K401,  K402,  K403,  K404,  K405,  K406,  K407,  K408,  K409,  K410,  K411,  K412,  K413,  K414,  K415,  K416,  K417,  K418,  K419 }, \
+	{ K500,  K501,  K502,  K503,  K504,  K505,  K506,  K507,  K508,  K509,  K510,  K511,  K512,  K513,  K514,  K515,  K516,  K517,  K518,  K519 }  \
+}
--- a/keyboards/bop/config.h
+++ b/keyboards/bop/config.h
@ -0,0 +1,49 @@
+/* Copyright 2021 Brandon Lewis
+  * 
+  * This program is free software: you can redistribute it and/or modify 
+  * it under the terms of the GNU General Public License as published by 
+  * the Free Software Foundation, either version 2 of the License, or 
+  * (at your option) any later version. 
+  * 
+  * This program is distributed in the hope that it will be useful, 
+  * but WITHOUT ANY WARRANTY; without even the implied warranty of 
+  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the 
+  * GNU General Public License for more details. 
+  * 
+  * You should have received a copy of the GNU General Public License 
+  * along with this program.  If not, see <http://www.gnu.org/licenses/>. 
+  */ 
+
+#pragma once
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID       0x666B // fk
+#define PRODUCT_ID      0x626F // bo
+#define DEVICE_VER      0x0001 // rev 1
+#define MANUFACTURER    fruitykeeb
+#define PRODUCT         bop
+
+/* key matrix size */
+#define MATRIX_ROWS 6
+#define MATRIX_COLS 20
+
+/* key matrix pins */
+#define MATRIX_ROW_PINS { B7, D0, D1, D2, D3, D4 }
+#define MATRIX_COL_PINS { D5, C5, B0, B1, B2, B3, B4, B5, B6, E7, E6, F0, F7, F6, F5, F4, F3, F2, F1, C6 }
+//    If your board is spamming the end column, change C7 to C6 in the line above and short those pins on the controller
+                        
+#define UNUSED_PINS
+
+/* COL2ROW or ROW2COL */
+#define DIODE_DIRECTION COL2ROW
+
+/* Set 0 if debouncing isn't needed */
+#define DEBOUNCE 5
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
--- a/keyboards/bop/info.json
+++ b/keyboards/bop/info.json
@ -0,0 +1,138 @@
+{
+    "keyboard_name":  "bop",
+    "url": "https://github.com/blewis308/BOP-Keyboard",
+    "maintainer": "Fruit",
+    "width":  20.0,
+    "height": 6.0,
+    "layouts": {
+        "LAYOUT": {
+            "layout": [
+                {"x":0, "y":0},
+                {"x":1, "y":0},
+                {"x":2, "y":0},
+                {"x":3, "y":0},
+                {"x":4, "y":0},
+                {"x":5, "y":0},
+                {"x":6, "y":0},
+                {"x":7, "y":0},
+                {"x":8, "y":0},
+                {"x":9, "y":0},
+                {"x":10, "y":0},
+                {"x":11, "y":0},
+                {"x":12, "y":0},
+                {"x":13, "y":0},
+                {"x":14, "y":0},
+                {"x":15, "y":0},
+                {"x":16, "y":0},
+                {"x":17, "y":0},
+                {"x":18, "y":0},
+                {"x":19, "y":0},
+
+                {"x":0, "y":1},
+                {"x":1, "y":1},
+                {"x":2, "y":1},
+                {"x":3, "y":1},
+                {"x":4, "y":1},
+                {"x":5, "y":1},
+                {"x":6, "y":1},
+                {"x":7, "y":1},
+                {"x":8, "y":1},
+                {"x":9, "y":1},
+                {"x":10, "y":1},
+                {"x":11, "y":1},
+                {"x":12, "y":1},
+                {"x":13, "y":1},
+                {"x":14, "y":1},
+                {"x":15, "y":1},
+                {"x":16, "y":1},
+                {"x":17, "y":1},
+                {"x":18, "y":1},
+                {"x":19, "y":1},
+                
+                {"x":0, "y":2},
+                {"x":1, "y":2},
+                {"x":2, "y":2},
+                {"x":3, "y":2},
+                {"x":4, "y":2},
+                {"x":5, "y":2},
+                {"x":6, "y":2},
+                {"x":7, "y":2},
+                {"x":8, "y":2},
+                {"x":9, "y":2},
+                {"x":10, "y":2},
+                {"x":11, "y":2},
+                {"x":12, "y":2},
+                {"x":13, "y":2},
+                {"x":14, "y":2},
+                {"x":15, "y":2},
+                {"x":16, "y":2},
+                {"x":17, "y":2},
+                {"x":18, "y":2},
+                {"x":19, "y":2},
+                
+                {"x":0, "y":3},
+                {"x":1, "y":3},
+                {"x":2, "y":3},
+                {"x":3, "y":3},
+                {"x":4, "y":3},
+                {"x":5, "y":3},
+                {"x":6, "y":3},
+                {"x":7, "y":3},
+                {"x":8, "y":3},
+                {"x":9, "y":3},
+                {"x":10, "y":3},
+                {"x":11, "y":3},
+                {"x":12, "y":3},
+                {"x":13, "y":3},
+                {"x":14, "y":3},
+                {"x":15, "y":3},
+                {"x":16, "y":3},
+                {"x":17, "y":3},
+                {"x":18, "y":3},
+                {"x":19, "y":3},
+                
+                {"x":0, "y":4},
+                {"x":1, "y":4},
+                {"x":2, "y":4},
+                {"x":3, "y":4},
+                {"x":4, "y":4},
+                {"x":5, "y":4},
+                {"x":6, "y":4},
+                {"x":7, "y":4},
+                {"x":8, "y":4},
+                {"x":9, "y":4},
+                {"x":10, "y":4},
+                {"x":11, "y":4},
+                {"x":12, "y":4},
+                {"x":13, "y":4},
+                {"x":14, "y":4},
+                {"x":15, "y":4},
+                {"x":16, "y":4},
+                {"x":17, "y":4},
+                {"x":18, "y":4},
+                {"x":19, "y":4},
+                
+                {"x":0, "y":5},
+                {"x":1, "y":5},
+                {"x":2, "y":5},
+                {"x":3, "y":5},
+                {"x":4, "y":5},
+                {"x":5, "y":5},
+                {"x":6, "y":5},
+                {"x":7, "y":5},
+                {"x":8, "y":5},
+                {"x":9, "y":5},
+                {"x":10, "y":5},
+                {"x":11, "y":5},
+                {"x":12, "y":5},
+                {"x":13, "y":5},
+                {"x":14, "y":5},
+                {"x":15, "y":5},
+                {"x":16, "y":5},
+                {"x":17, "y":5},
+                {"x":18, "y":5},
+                {"x":19, "y":5}
+            ]
+        }
+    }
+}
--- a/keyboards/bop/keymaps/default/keymap.c
+++ b/keyboards/bop/keymaps/default/keymap.c
@ -0,0 +1,46 @@
+/* Copyright 2021 Brandon Lewis
+  * 
+  * This program is free software: you can redistribute it and/or modify 
+  * it under the terms of the GNU General Public License as published by 
+  * the Free Software Foundation, either version 2 of the License, or 
+  * (at your option) any later version. 
+  * 
+  * This program is distributed in the hope that it will be useful, 
+  * but WITHOUT ANY WARRANTY; without even the implied warranty of 
+  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the 
+  * GNU General Public License for more details. 
+  * 
+  * You should have received a copy of the GNU General Public License 
+  * along with this program.  If not, see <http://www.gnu.org/licenses/>. 
+  */ 
+
+#include QMK_KEYBOARD_H
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+	[0] = LAYOUT(
+	/*			For build guide: go to https://github.com/blewis308/BOP-Keyboard
+	*	,-----------------------------------------------------------------------------------------------------------------------.
+	*	| F1  | F5  | F9  |  ~  |  !  |  @  |  #  |  $  |  %  |  ^  |  &  |  *  |  (  |  )  |  _  |  +  | del |  {  |  }  |  |  |
+	*	|-----+-----+-----+-----+-----+-----+-----+-----+-----+-----+-----+-----+-----+-----+-----+-----+-----+-----+-----+-----|
+	*	| F2  | F6  | F10 | esc |  1  |  2  |  3  |  4  |  5  |  6  |  7  |  8  |  9  |  0  |  -  |  =  |bkspc| home| end |pg up|
+	*	|-----+-----+-----+-----+-----+-----+-----+-----+-----+-----+-----+-----+-----+-----+-----+-----+-----+-----+-----+-----|
+	*	| F3  | F7  | F11 | tab |  q  |  w  |  e  |  r  |  t  |  y  |  u  |  i  |  o  |  p  |  [  |  ]  |  \  |  :  |  "  |pg dn|
+	*	|-----+-----+-----+-----+-----+-----+-----+-----+-----+-----+-----+-----+-----+-----+-----+-----+-----+-----+-----+-----|
+	*	| F4  | F8  | F12 |caplk|  a  |  s  |  d  |  f  |  g  |  h  |  j  |  k  |  l  |  ;  |  '  |enter|     |  7  |  8  |  9  |
+	*	|-----+-----+-----+-----+-----+-----+-----+-----+-----+-----+-----+-----+-----+-----+-----+-----|  0  |-----+-----+-----|
+	*	|ptscr|scrlk|psbrk|shift|  z  |  x  |  c  |  v  |  b  |  n  |  m  |  <  |  >  |  ?  |shift| up  |     |  4  |  5  |  6  |
+	*	|-----+-----+-----+-----+-----+-----+-----+-----+-----+-----+-----+-----+-----+-----+-----+-----+-----+-----+-----+-----|
+	*	| cut | copy|paste|Lctrl|L gui|L alt|   space   | n/a |   space   |  ,  |  .  |  /  | left| down|right|  1  |  2  |  3  |
+	*	`-----------------------------------------------------------------------------------------------------------------------'
+	*
+	*	Notes: spaces and numpad 0 can be 1u instead of 2u also, this is already reflected in the keymap below
+	*/
+	
+		KC_F1, 		KC_F5, 		KC_F9, 	    KC_TILD, KC_EXLM,   KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN,  KC_RPRN, 	KC_UNDS, KC_PLUS, KC_DEL, KC_LCBR, KC_RCBR, KC_PIPE, 
+		KC_F2, 		KC_F6, 		KC_F10, 	KC_ESC,  KC_1, 		KC_2, 	KC_3, 	KC_4, 	KC_5, 	KC_6, 		KC_7, 	KC_8, 	KC_9, 		KC_0, 	KC_MINS, KC_EQL, KC_BSPC, KC_HOME, KC_END, KC_PGUP, 
+		KC_F3, 		KC_F7, 		KC_F11, 	KC_TAB,  KC_Q, 		KC_W, 	KC_E, 	KC_R, 	KC_T, 	KC_Y, 		KC_U, 	KC_I, 	KC_O, 		KC_P, 	KC_LBRC, KC_RBRC, KC_BSLS, KC_COLN, KC_DQUO, KC_PGDN, 
+		KC_F4,      KC_F8, 		KC_F12, 	KC_CAPS, KC_A, 		KC_S, 	KC_D, 	KC_F, 	KC_G, 	KC_H, 		KC_J, 	KC_K, 	KC_L, 		KC_SCLN, KC_QUOT, KC_ENT, KC_0,		KC_7, 	KC_8,   KC_9, 
+		KC_PSCR,    KC_SLCK, 	KC_PAUS, 	KC_LSFT, KC_Z, 		KC_X, 	KC_C, 	KC_V, 	KC_B, 	KC_N, 		KC_M, 	KC_LABK, KC_RABK, 	KC_QUES, KC_RSFT, KC_UP,  KC_0, 	KC_4, 	KC_5,   KC_6, 
+		LCTL(KC_X), LCTL(KC_C), LCTL(KC_V), KC_LCTL, KC_LGUI,	KC_LALT, KC_SPC, KC_SPC, KC_NO, KC_SPC,   KC_SPC, 	KC_COMM, KC_DOT,   KC_SLSH,  KC_LEFT, KC_DOWN, KC_RGHT, KC_1, 	KC_2, 	KC_3 )
+};
--- a/keyboards/bop/readme.md
+++ b/keyboards/bop/readme.md
@ -0,0 +1,16 @@
+# bop
+
+![Bop](https://i.imgur.com/mEWmMgvh.jpg)
+![Bop-top](https://i.imgur.com/DbjVdvVh.jpg)
+
+A huge 6x20 ortholinear keyboard inspired by the BFO-9000
+
+* Keyboard Maintainer: [Fruit](https://github.com/Blewis308)
+* Hardware Supported: Bop v1.1 PCB, Teensy 2.0++
+* Hardware Availablility: Through Group Buy - Jan 2021
+
+Make example for this keyboard (after setting up your build envionment):
+
+    make bop:default
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
--- a/keyboards/bop/rules.mk
+++ b/keyboards/bop/rules.mk
@ -0,0 +1,23 @@
+# MCU name
+MCU = at90usb1286
+
+# Bootloader selection
+BOOTLOADER = halfkay
+
+# Build Options
+#   change yes to no to disable
+#
+BOOTMAGIC_ENABLE = lite     # Virtual DIP switch configuration
+MOUSEKEY_ENABLE = yes       # Mouse keys
+EXTRAKEY_ENABLE = yes       # Audio control and System control
+CONSOLE_ENABLE = no         # Console for debug
+COMMAND_ENABLE = no         # Commands for debug and configuration
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
+# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE = yes           # USB Nkey Rollover
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
+RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow
+BLUETOOTH_ENABLE = no       # Enable Bluetooth
+AUDIO_ENABLE = no           # Audio output
+SWAP_HANDS_ENABLE = no
--- a/keyboards/cannonkeys/an_c/config.h
+++ b/keyboards/cannonkeys/an_c/config.h
@ -56,6 +56,8 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define RGBLED_NUM 14
 #define WS2812_SPI SPID2
 #define WS2812_SPI_MOSI_PAL_MODE 0
+#define WS2812_SPI_SCK_PAL_MODE 0
+#define WS2812_SPI_SCK_PIN B13

 /*
 * Feature disable options
--- a/keyboards/cannonkeys/atlas/config.h
+++ b/keyboards/cannonkeys/atlas/config.h
@ -50,6 +50,8 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define RGB_DI_PIN B15
 #define RGBLED_NUM 22
 #define WS2812_SPI_MOSI_PAL_MODE 0
+#define WS2812_SPI_SCK_PAL_MODE 0
+#define WS2812_SPI_SCK_PIN B13

 /*
 * Feature disable options
--- a/keyboards/cannonkeys/db60/config.h
+++ b/keyboards/cannonkeys/db60/config.h
@ -55,6 +55,8 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define RGB_DI_PIN B15
 #define RGBLED_NUM 20
 #define WS2812_SPI_MOSI_PAL_MODE 0
+#define WS2812_SPI_SCK_PAL_MODE 0
+#define WS2812_SPI_SCK_PIN B13

 /*
 * Feature disable options
--- a/keyboards/cannonkeys/devastatingtkl/config.h
+++ b/keyboards/cannonkeys/devastatingtkl/config.h
@ -56,6 +56,8 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define RGBLED_NUM 20
 #define WS2812_SPI SPID2
 #define WS2812_SPI_MOSI_PAL_MODE 0
+#define WS2812_SPI_SCK_PAL_MODE 0
+#define WS2812_SPI_SCK_PIN B13

 /*
 * Feature disable options
--- a/keyboards/cannonkeys/instant60/config.h
+++ b/keyboards/cannonkeys/instant60/config.h
@ -56,6 +56,8 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define RGBLED_NUM 14
 #define WS2812_SPI SPID2
 #define WS2812_SPI_MOSI_PAL_MODE 0
+#define WS2812_SPI_SCK_PAL_MODE 0
+#define WS2812_SPI_SCK_PIN B13

 /*
 * Feature disable options
--- a/keyboards/cannonkeys/instant65/config.h
+++ b/keyboards/cannonkeys/instant65/config.h
@ -56,6 +56,8 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define RGBLED_NUM 20
 #define WS2812_SPI SPID2
 #define WS2812_SPI_MOSI_PAL_MODE 0
+#define WS2812_SPI_SCK_PAL_MODE 0
+#define WS2812_SPI_SCK_PIN B13


 /*
--- a/keyboards/cannonkeys/obliterated75/config.h
+++ b/keyboards/cannonkeys/obliterated75/config.h
@ -56,6 +56,8 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define RGBLED_NUM 20
 #define WS2812_SPI SPID2
 #define WS2812_SPI_MOSI_PAL_MODE 0
+#define WS2812_SPI_SCK_PAL_MODE 0
+#define WS2812_SPI_SCK_PIN B13


 /*
--- a/keyboards/cannonkeys/sagittarius/config.h
+++ b/keyboards/cannonkeys/sagittarius/config.h
@ -60,6 +60,8 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define RGBLED_NUM 8
 #define WS2812_SPI SPID2
 #define WS2812_SPI_MOSI_PAL_MODE 0
+#define WS2812_SPI_SCK_PAL_MODE 0
+#define WS2812_SPI_SCK_PIN B13

 #define DYNAMIC_KEYMAP_LAYER_COUNT 2

--- a/keyboards/cannonkeys/savage65/config.h
+++ b/keyboards/cannonkeys/savage65/config.h
@ -56,6 +56,8 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define RGBLED_NUM 20
 #define WS2812_SPI SPID2
 #define WS2812_SPI_MOSI_PAL_MODE 0
+#define WS2812_SPI_SCK_PAL_MODE 0
+#define WS2812_SPI_SCK_PIN B13


 /*
--- a/keyboards/cannonkeys/tmov2/config.h
+++ b/keyboards/cannonkeys/tmov2/config.h
@ -56,6 +56,8 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define RGBLED_NUM 22
 #define WS2812_SPI SPID2
 #define WS2812_SPI_MOSI_PAL_MODE 0
+#define WS2812_SPI_SCK_PAL_MODE 0
+#define WS2812_SPI_SCK_PIN B13

 /*
 * Feature disable options
--- a/keyboards/cannonkeys/tsukuyomi/config.h
+++ b/keyboards/cannonkeys/tsukuyomi/config.h
@ -56,6 +56,8 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define RGBLED_NUM 20
 #define WS2812_SPI SPID2
 #define WS2812_SPI_MOSI_PAL_MODE 0
+#define WS2812_SPI_SCK_PAL_MODE 0
+#define WS2812_SPI_SCK_PIN B13


 /*
--- a/keyboards/capsunlocked/cu80/v2_ansi/rgb/rules.mk
+++ b/keyboards/capsunlocked/cu80/v2_ansi/rgb/rules.mk
@ -1,2 +1,4 @@
 RGB_MATRIX_ENABLE = yes     # Enable RGB matrix
 RGB_MATRIX_DRIVER = WS2812  # Set Driver to WS2812
+
+LTO_ENABLE = yes
--- a/keyboards/capsunlocked/cu80/v2_iso/rgb/rules.mk
+++ b/keyboards/capsunlocked/cu80/v2_iso/rgb/rules.mk
@ -1,2 +1,4 @@
 RGB_MATRIX_ENABLE = yes     # Enable RGB matrix
 RGB_MATRIX_DRIVER = WS2812  # Set Driver to WS2812
+
+LTO_ENABLE = yes
--- a/keyboards/coseyfannitutti/discipline/keymaps/noroadsleft/config.h
+++ b/keyboards/coseyfannitutti/discipline/keymaps/noroadsleft/config.h
@ -0,0 +1,20 @@
+/* Copyright 2021 James Young (@noroadsleft)
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+#define ANSI_NUBS_ROW 3
+#define ANSI_NUBS_COL 2
--- a/keyboards/coseyfannitutti/discipline/keymaps/noroadsleft/keymap.c
+++ b/keyboards/coseyfannitutti/discipline/keymaps/noroadsleft/keymap.c
@ -54,10 +54,10 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
    ),

    [_FN] = LAYOUT_65_ansi(
-        KC_GRV,  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  KC_DEL,  KC_PSCR,
-        _______, KC_CALC, KC_APP,  _______, _______, _______, KC_INS,  KC_HOME, KC_UP,   KC_END,  KC_PGUP, KC_PSCR, KC_SLCK, KC_PAUS, _______,
-        _______, M_SALL,  _______, _______, _______, _______, KC_DEL,  KC_LEFT, KC_DOWN, KC_RGHT, KC_PGDN, _______,          _______, _______,
-        _______,          M_UNDO,  M_CUT,   M_COPY,  M_PASTE, _______, _______, KC_MUTE, KC_VOLD, KC_VOLU, TO(_SY), _______, _______, _______,
+        KC_GRV,  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  KC_DEL,  DM_REC1,
+        _______, KC_CALC, KC_APP,  _______, _______, _______, KC_INS,  KC_HOME, KC_UP,   KC_END,  KC_PGUP, KC_PSCR, KC_SLCK, KC_PAUS, DM_REC2,
+        _______, M_SALL,  _______, _______, _______, _______, KC_DEL,  KC_LEFT, KC_DOWN, KC_RGHT, KC_PGDN, _______,          DM_RSTP, DM_PLY1,
+        _______,          M_UNDO,  M_CUT,   M_COPY,  M_PASTE, _______, _______, KC_MUTE, KC_VOLD, KC_VOLU, TO(_SY), _______, _______, DM_PLY2,
        _______, _______, _______,                            TG(_NP),                   _______, _______, _______, _______, _______, _______
    ),

--- a/keyboards/coseyfannitutti/discipline/keymaps/noroadsleft/rules.mk
+++ b/keyboards/coseyfannitutti/discipline/keymaps/noroadsleft/rules.mk
@ -0,0 +1 @@
+DYNAMIC_MACRO_ENABLE = yes
--- a/Show More
+++ b/Show More
Author	SHA1	Message	Date
Ryan	261d94ce34	Tidy up spi_master includes (#13053 )	2021-06-03 16:26:41 +10:00
James Young	a0cc2dc6d0	Update noroadsleft userspace and keymaps (2021-06-02) (#13086 )	2021-06-02 23:06:30 -07:00
Nick Brassel	597d2e0e7b	Fix up WS2812 SPI driver on F072. (#13022 )	2021-06-03 09:48:16 +10:00
Joel Elkins	35dbe8ba03	[Keymap] merge jdelkins userspace and associated keymaps (#11276 ) * [Keymap] merge jdelkins userspace and associated keymaps * Add copyright & license info * Change rgblight_config.enable to rgblight_is_enabled() * Update keyboards/dz60/keymaps/jdelkins/keymap.c Co-authored-by: Drashna Jaelre <drashna@live.com> * Update keyboards/dz60/keymaps/jdelkins/keymap.c Co-authored-by: Drashna Jaelre <drashna@live.com> * Update keyboards/dz60/keymaps/jdelkins/keymap.c Co-authored-by: Drashna Jaelre <drashna@live.com> * Remove superfluous includes * Change EXTRAFLAGS+=-flto to LTO_ENABLE=yes * Remove unnecessary jdelkins_ss symlink in users * Add copyright and license notices * Use preferred way to determine capslock / numlock state Co-authored-by: Drashna Jaelre <drashna@live.com> * Add #pragma once to a header Co-authored-by: Drashna Jaelre <drashna@live.com> * Include QMK_KEYBOARD_H only once, in userspace header * Remove unnecessary initialization in matrix_init_keymap * Do process_record_keymap before cases handled in process_record_user * Reorganize & simplify secrets feature enablement * Use tap_code16 Co-authored-by: Ryan <fauxpark@gmail.com> * Remove superfluous break Co-authored-by: Ryan <fauxpark@gmail.com> * Remove copyright from rules.mk Co-authored-by: Ryan <fauxpark@gmail.com> * Remove copyright from rules.mk Co-authored-by: Ryan <fauxpark@gmail.com> * Use tap_code16 Co-authored-by: Ryan <fauxpark@gmail.com> * include "print.h" instead of <print.h> Co-authored-by: Ryan <fauxpark@gmail.com> * Use tap_cod16 Co-authored-by: Ryan <fauxpark@gmail.com> * Use tap_code16 Co-authored-by: Ryan <fauxpark@gmail.com> * Use tap_code16 Co-authored-by: Ryan <fauxpark@gmail.com> * Use tap_code16 Co-authored-by: Ryan <fauxpark@gmail.com> * Remove copyright from rules.mk Co-authored-by: Ryan <fauxpark@gmail.com> * add #pragma once to a header Co-authored-by: Ryan <fauxpark@gmail.com> * include "print.h" instead of <print.h> Co-authored-by: Ryan <fauxpark@gmail.com> * Remove copyright from rules.mk Co-authored-by: Ryan <fauxpark@gmail.com> * Remove copyright from rules.mk Co-authored-by: Ryan <fauxpark@gmail.com> * Remove copyright from rules.mk Co-authored-by: Ryan <fauxpark@gmail.com> * Use tap_code16 Co-authored-by: Ryan <fauxpark@gmail.com> * Use tap_code16 Co-authored-by: Ryan <fauxpark@gmail.com> * Use :flash target where possible * Remove special case flash target and use PROGRAM_CMD * dz60/jdelkins_ss: use tap_code16 Co-authored-by: Drashna Jaelre <drashna@live.com> Co-authored-by: Ryan <fauxpark@gmail.com>	2021-06-03 06:59:52 +10:00
Xelus22	93496c8364	fix missing arg (#13068 )	2021-06-01 18:12:17 +10:00
Xelus22	5a06813b10	VIA compile fixes (#13054 )	2021-05-31 21:56:23 -07:00
Jeff Apczynski	6bafefa886	[Keymap] lja83's Planck keymap (#12809 ) Co-authored-by: Ryan <fauxpark@gmail.com> Co-authored-by: Drashna Jaelre <drashna@live.com> Co-authored-by: Jeff Apczynski <jeffrey.apczynski@braincorp.com>	2021-05-30 21:16:26 -07:00
Gregorio	1a3064afb1	[Keyboard] Add Rubi Numpad (#12283 ) Co-authored-by: Drashna Jaelre <drashna@live.com> Co-authored-by: Ryan <fauxpark@gmail.com>	2021-05-30 21:04:26 -07:00
Lander	2b8f1fcdfb	[Keyboard] Unicomp Mini M (#12892 )	2021-05-30 14:58:43 -07:00
Brandon Lewis	7b055dcc55	[Keyboard] Added BOP support (#12991 ) Co-authored-by: Ryan <fauxpark@gmail.com> Co-authored-by: Brandon Lewis <blewis308@users.noreply.github.com>	2021-05-30 14:57:43 -07:00
lukeski14	fc9a2167b1	[Keyboard] jabberwocky via support (#13029 )	2021-05-30 14:55:58 -07:00
Sergey Vlasov	3aca3d3572	merge/um70:via: Avoid sprintf() to make the code fit into flash (#12919 ) The code using sprintf() did not fit into flash when `merge/um70:via` was compiled with avr-gcc 5.4.0: * The firmware is too large! 29756/28672 (1084 bytes over) Replacing `sprintf(wpm_str, " %03d", current_wpm);` with custom formatting code reduces the firmware size by 1504 bytes, which is enough to make the `merge/um70:via` firmware fit: * The firmware size is approaching the maximum - 28252/28672 (98%, 420 bytes free)	2021-05-30 14:47:44 -07:00
Erovia	305cca9a5e	CLI: Fix automagic (#13046 )	2021-05-30 16:17:40 +01:00